Dead cell counts during serum cultivation are underestimated by the fluorescent live/dead assay

3D Printed SiO2-Tricalcium Phosphate Scaffolds Loaded with Carvacrol Nanoparticles for Bone Tissue Engineering Application

Bone damage resulting from trauma or aging poses challenges in clinical settings that need to be addressed using bone tissue engineering (BTE). Carvacrol (CA) possesses anti-inflammatory, anticancer, and antibacterial properties. Limited solubility and physicochemical stability restrict its biological activity, requiring a stable carrier system for delivery. Here, we investigate the utilization of a three-dimensional printed (3DP) SiO2-doped tricalcium phosphate (TCP) scaffold functionalized with carvacrol-loaded lipid nanoparticles (CA-LNPs) to improve bone health. It exhibits a negative surface charge with an entrapment efficiency of ∼97% and size ∼129 nm with polydispersity index (PDI) and zeta potential values of 0.18 and -16 mV, respectively. CA-LNPs exhibit higher and long-term release over 35 days. The CA-LNP loaded SiO2-doped TCP scaffold demonstrates improved antibacterial properties against Staphylococcus aureus and Pseudomonas aeruginosa by >90% reduction in bacterial growth. Functionalized scaffolds result in 3-fold decrease and 2-fold increase in osteosarcoma and osteoblast cell viability, respectively. These findings highlight the therapeutic potential of the CA-LNP loaded SiO2-doped TCP scaffold for bone defect treatment.

NIR-II Fluorescence Imaging-Guided Oxygen Self-Sufficient Nano-Platform for Precise Enhanced Photodynamic Therapy

Tumor hypoxia and systemic toxicity seriously affect the efficacy of photodynamic therapy (PDT) and are considered as the "Achilles' heel" of PDT. Herein, to combat such limitations, an intelligent orthogonal emissions LDNP@SiO₂ -CaO₂ and folic acid-polyethylene glycol-Ce6 nanodrug is rationally designed and fabricated not only for relieving the hypoxic tumor microenvironment (TME) to enhance PDT efficacy, but also for determining the optimal triggering time through second near-infrared (NIR-II) fluorescence imaging. The designed nanodrug continuously releases a large amount of O₂ , H₂ O₂ , and Ca²⁺ ions when exposed to the acidic TME. Meanwhile, under downshifting NIR-II bioimaging guidance, chlorine e6 (Ce6) consumes oxygen to produce ¹ O₂ upon excitation of upconversion photon. Moreover, cytotoxic reactive oxygen species (ROS) and calcium overload can induce mitochondria injury and thus enhance the oxidative stress in tumor cells. As a result, the NIR-II bioimaging guided TME-responsive oxygen self-sufficient PDT nanosystem presents enhanced anti-tumor efficacy without obvious systemic toxicity. Thus, the fabricated nanodrug offers great potential for designing an accurate cancer theranostic system.

Host transmission dynamics of first- and third-stage Angiostrongylus cantonensis larvae in Bullastra lessoni

Given the importance of angiostrongyliasis as an emerging infectious disease of humans, companion animals, and wildlife, the current study focused on the transmission dynamics of first- and third-stage larvae of the parasitic nematode, Angiostrongylus cantonensis. The migration of infective larvae and their subsequent distribution within the Lymnaeidae snail, Bullastra lessoni, were investigated over time using microscopic examination of histological sections and fresh tissue. Snails were divided into four anatomical regions: (i) anterior and (ii) posterior cephalopedal masses, (iii) mantle skirt and (iv) visceral mass. The viability of free-swimming third-stage larvae, after their release from snail tissues, was evaluated in vitro by propidium iodide staining and infectivity by in vivo infection of Wistar rats. Snails were sequentially dissected over time to assess the number and anatomical distribution of larvae within each snail and hence infer their migration pathway. Herein, ongoing larval migratory activity was detected over 28 days post-infection. A comparison of infection rates and the larval distribution within the four designated snail regions demonstrated a significant relationship between anatomical region and density of infective larvae, with larvae mostly distributed in the anterior cephalopedal mass (43.6 ± 10.8%) and the mantle skirt (33.0 ± 8.8%). Propidium iodide staining showed that free-swimming third-stage larvae retained viability for between 4 and 8 weeks when stored under laboratory conditions. In contrast to viability, larval infectivity in rats remained for up to 2 weeks only. Knowledge gained from the current work could provide information on the development of new approaches to controlling the transmission of this parasite.

Optimization and Validation of a Human Ex Vivo Femoral Head Model for Preclinical Cartilage Research and Regenerative Therapies

OBJECTIVE

Articular cartilage is incapable of effective repair following injury or during osteoarthritis. While there have been developments in cartilage repair technologies, there is a need to advance biologically relevant models for preclinical testing of biomaterial and regenerative therapies. This study describes conditions for the effective ex vivo culture of the whole human femoral head.

DESIGN

Fresh, viable femoral heads were obtained from femoral neck fractures and cultured for up to 10 weeks in (a) Dulbecco's modified Eagle's medium (DMEM); (b) DMEM + mixing; (c) DMEM + 10% human serum (HS); (d) DMEM + 10% HS + mixing. The viability, morphology, volume, and density of fluorescently labelled in situ chondrocytes and cartilage surface roughness were assessed by confocal microscopy. Cartilage histology was studied for glycosaminoglycan content using Alcian blue and collagen content using picrosirius red.

RESULTS

Chondrocyte viability remained at >95% in DMEM + 10% HS. In DMEM alone, viability remained high for ~4 weeks and then declined. For the other conditions, superficial zone chondrocyte viability fell to <35% at 10 weeks with deeper zones being relatively unaffected. In DMEM + 10% HS at 10 weeks, the number of chondrocytes possessing cytoplasmic processes increased compared with DMEM (P = 0.017). Alcian blue labeling decreased (P = 0.02) and cartilage thinned (P ≤ 0.05); however, there was no change to surface roughness, chondrocyte density, chondrocyte volume, or picrosirius red labeling (P > 0.05).

CONCLUSIONS

In this ex vivo model, chondrocyte viability was maintained in human femoral heads for up to 10 weeks in culture, a novel finding not previously reported. This human model could prove invaluable for the exploration, development, and assessment of preclinical cartilage repair and regenerative therapies.

Critical Role of Etching Parameters in the Evolution of Nano Micro SLA Surface on the Ti6Al4V Alloy Dental Implants

The surface of dental implants plays a vital role in early and more predictable osseointegration. SLA (sandblasted large grit and acid-etched) represents the most widely accepted, long-term clinically proven surface. Primarily, dental implants are manufactured by either commercially pure titanium (CP-Ti) or Ti6Al4V ELI alloy. The acid etch behavior of CP-Ti is well known and its effects on the surface microstructure and physicochemical properties have been studied by various researchers in the past. However, there is a lack of studies showing the effect of acid etching parameters on the Ti6Al4V alloy surface. The requirement of the narrow diameter implants necessitates implant manufacturing from alloys due to their high mechanical properties. Hence, it is necessary to have an insight on the behavior of acid etching of the alloy surface as it might be different due to changed compositions and microstructure, which can further influence the osseointegration process. The present research was carried out to study the effect of acid etching parameters on Ti6Al4V ELI alloy surface properties and the optimization of process parameters to produce micro- and nanotopography on the dental implant surface. This study shows that the Ti6Al4V ELI alloy depicts an entirely different surface topography compared to CP-Ti. Moreover, the surface topography of the Ti6Al4V ELI alloy was also different when etching was done at room temperature compared to high temperature, which in turn affected the behavior of the cell on these surfaces. Both microns and nano-level topography were achieved through the optimized parameters of acid etching on Ti6Al4V ELI alloy dental implant surface along with improved roughness, hydrophilicity, and enhanced cytocompatibility.

Evaluation of Fibroblast Viability Seeded on Acellular Human Amniotic Membrane

Background

Investigating the viability and proliferative rates of fibroblast cells on human amniotic membrane (HAM) as a scaffold will be an important subject for further research. The aim of this study was to assess the fibroblast viability seeded on acellular HAM, since foreskin neonatal allogenic fibroblasts seeded on HAM accelerate the wound healing process.

Methods

Fibroblasts were retrieved from the foreskin of a genetically healthy male infant, and we exploited AM of healthy term neonates to prepare the amniotic scaffold for fibroblast transfer. After cell culture, preparation of acellular HAM, and seeding of cells on HAM based on the protocol, different methods including 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), 4′,6-Diamidino-2-phenylindole dihydrochloride (DAPI), and propidium iodide (PI) staining were employed for assessment of fibroblast viability on HAM.

Results

Based on the results obtained from the DAPI and PI staining, the percentage of viable cells in the former staining was clearly higher than that of the dead cells in the latter one. The results of DAPI and PI staining were in accordance with the findings of MTT assay, confirming that fibroblasts were viable and even proliferate on HAM.

Conclusion

Our findings showed the viability of fibroblasts seeded on the acellular HAM using MTT assay, DAPI, and PI staining; however, this study had some limitations. It would be an interesting subject for future research to compare the viability and proliferation rate of fibroblasts seeded on both cellular and acellular HAM.

Lipodendriplexes mediated enhanced gene delivery: a cellular to pre-clinical investigation

Clinical success of effective gene therapy is mainly hampered by the insufficiency of safe and efficient internalization of a transgene to the targeted cellular site. Therefore, the development of a safe and efficient nanocarrier system is one of the fundamental challenges to transfer the therapeutic genes to the diseased cells. Polyamidoamine (PAMAM) dendrimer has been used as an efficient non-viral gene vector (dendriplexes) but the toxicity and unusual biodistribution induced by the terminal amino groups (–NH₂) limit its in vivo applications. Hence, a state of the art lipid modification with PAMAM based gene carrier (lipodendriplexes) was planned to investigate theirs in vitro (2D and 3D cell culture) and in vivo behaviour. In vitro pDNA transfection, lactate dehydrogenase (LDH) release, reactive oxygen species (ROS) generation, cellular protein contents, live/dead staining and apoptosis were studied in 2D cell culture of HEK-293 cells while GFP transfection, 3D cell viability and live/dead staining of spheroids were performed in its 3D cell culture. Acute toxicity studies including organ to body index ratio, hematological parameters, serum biochemistry, histopathological profiles and in vivo transgene expression were assessed in female BALB/c mice. The results suggested that, in comparison to dendriplexes the lipodendriplexes exhibited significant improvement of pDNA transfection (p < 0.001) with lower LDH release (p < 0.01) and ROS generation (p < 0.05). A substantially higher cellular protein content (p < 0.01) and cell viability were also observed in 2D culture. A strong GFP expression with an improved cell viability profile (p < 0.05) was indicated in lipodendriplexes treated 3D spheroids. In vivo archives showed the superiority of lipid-modified nanocarrier system, depicted a significant increase in green fluorescent protein (GFP) expression in the lungs (p < 0.01), heart (p < 0.001), liver (p < 0.001) and kidneys (p < 0.001) with improved serum biochemistry and hematological profile as compared to unmodified dendriplexes. No tissue necrosis was evident in the animal groups treated with lipid-shielded molecules. Therefore, a non-covalent conjugation of lipids with PAMAM based carrier system could be considered as a promising approach for an efficient and biocompatible gene delivery system.

Chrysophyllum cainito stem bark extract induces apoptosis in Human hepatocarcinoma HepG2 cells through ROS-mediated mitochondrial pathway

Hepatocellular carcinoma is the most common type of primary liver cancer in humans. This study aimed to demonstrate anticancer properties of an aqueous extract from Chrysophyllum cainito stem bark (CE) and its underlying mechanisms. Our MTT assay results showed that CE significantly reduced human hepatocellular carcinoma (HepG2) cell viability with the IC₅₀of 100 µg/mL, while human dermal primary fibroblast (HDFa) cells showed less susceptibility in every concentration tested. Determined by Annexin V staining, the proportion of apoptotic HepG2 cells increased in a dose-dependent fashion after 24 hour-exposure of CE. The results from Western blot analysis confirmed that CE reduced procaspase-3, suggesting apoptosis by activating caspase-3 cleavage. Using the DCFH-DA and DiOC6 fluorescent probes, it was found that CE significantly stimulated the generation of reactive oxygen species (ROS) and reduced mitochondrial membrane potential (Δψ_m), respectively. According to cell cycle analysis, CE (100 µg/mL) profoundly increased the percentage of cells in the sub-G1 phase, indicating cell apoptosis. These data suggest that CE induces apoptosis and cell death in human hepatocellular carcinoma via generation of intracellular ROS and disruption of Δψm. This is the first demonstration of the anticancer activity with proposed underlying mechanism of CE in liver cancer cells.

Investigating materials and orientation parameters for the creation of a 3D musculoskeletal interface co-culture model

Musculoskeletal tissue interfaces are a common site of injury in the young, active populations. In particular, the interface between the musculoskeletal tissues of tendon and bone is often injured and to date, no single treatment has been able to restore the form and function of damaged tissue at the bone–tendon interface. Tissue engineering and regeneration hold great promise for the manufacture of bespoke in vitro models or implants to be used to advance repair and so this study investigated the material, orientation and culture choices for manufacturing a reproducible 3D model of a musculoskeletal interface between tendon and bone cell populations. Such models are essential for future studies focussing on the regeneration of musculoskeletal interfaces in vitro. Cell-encapsulated fibrin hydrogels, arranged in a horizontal orientation though a simple moulding procedure, were shown to best support cellular growth and migration of cells to form an in vitro tendon–bone interface. This study highlights the importance of acknowledging the material and technical challenges in establishing co-cultures and suggests a reproducible methodology to form 3D co-cultures between tendon and bone, or other musculoskeletal cell types, in vitro.

A Systematic Safety Evaluation of Nanoporous Mannitol Material as a Dry-Powder Inhalation Carrier System

For carrier-based dry-powder inhaler (DPI) formulations, the adhesion between carrier particles and active pharmaceutical ingredients (API) particles have a significant influence on the aerosolization performance of the API-carrier complexes and the desired detachment of the API for efficient pulmonary delivery. In our previous study, nanoporous mannitol material was successfully fabricated as carriers by a one-step nonorganic solvent spray drying method with the thermal degradation of ammonium carbonate. These carriers were shown to achieve excellent aerosolization performance. In addition, no residue of ammonium carbonate was detected on the powder surface. However, the safety of nanoporous mannitol carriers (Nano-PMCs) during pulmonary administration/delivery was still unknown because the lung is vulnerable to the inhaled particles. To address this question, the present study was conducted to construct a systematic safety evaluation for DPIs carriers to investigate the safety of Nano-PMCs in the whole inhalation, which would make up for the lack of detailed and standardized method in this field. In vitro safety evaluation was carried out using respiratory and pulmonary cytotoxicity tests, hemolysis assay, and ciliotoxicity test. In vivo safety evaluation was studied by measuring inflammatory indicators in the bronchoalveolar lavage fluid, assessing the pulmonary function and observing pulmonary pathological changes. Nano-PMCs showed satisfactory biocompatibility on respiratory tracts and lungs in vitro and in vivo. It was suggested that Nano-PMCs were safe for intrapulmonary delivery and potential as DPI carriers.

Pilot Study of the Biological Properties and Vascularization of 3D Printed Bilayer Skin Grafts

The skin is the largest human organ, and defects in the skin with a diameter greater than 4 cm do not heal without treatment. Allogeneic skin transplantation has been used to allow wound healing, but many grafts do not survive after implantation, due to multiple complications in the procedure. In the present study, the vascularization of three-dimensional (3D) printed full-thickness skin grafts was investigated. Dermal-epithelial grafts were transplanted into a nude mouse model to evaluate integration with the host tissue and the extent of wound healing. To create microvessels in the skin grafts, a bilayer structure consisting of human dermal fibroblasts, keratinocytes, and microvascular endothelial cells was designed and fabricated using an extruded 3D printer. Human dermal fibroblasts and human microvascular endothelial cells were mixed with gelatin-sodium alginate composite hydrogel as the dermis, and human keratinocytes were mixed with gel as the epithelium. Confocal imaging allowed visualization of the location of the cells in the double-layer skin grafts. A full-thickness wound was created on the backs of nude mice and then covered with a double-layer skin graft. Various groups of mice were tested. Animals were euthanized and tissue samples collected after specified time points. Compared with the control group, wound contraction improved by approximately 10%. Histological analysis demonstrated that the new skin had an appearance similar to that of normal skin and with a significant degree of angiogenesis. The results of the immunohistochemical analysis demonstrated that the transplanted cells survived and participated in the healing process.

Synergistic combination of chemo‑phototherapy based on temozolomide/ICG‑loaded iron oxide nanoparticles for brain cancer treatment

Chemo‑photothermal therapy for cancer treatment has received increasing attention due to its selective therapeutic effects. In the present study, the anticancer effects of drug‑loaded Fe3O4 magnetic nanoparticles (MNPs) by chemo‑photothermal therapy on U‑87 MG human glioblastoma cells was investigated. Anticancer drug‑loaded Fe3O4 MNPs were prepared by loading temozolomide (TMZ) and indocyanine green (ICG), and were characterized by X‑ray diffraction, UV‑vis spectroscopy, thermal gravimetric analysis, transmission electron microscope, as well as drug‑loading capacity. Following treatment with near‑infrared (NIR) light irradiation, the administration of Fe3O4‑TMZ‑ICG MNPs resulted in the apoptosis of U‑87 MG glioblastoma cells through the generation of reactive oxygen species. Western blot analysis and reverse transcription‑quantitative polymerase chain reaction revealed that Fe3O4‑TMZ‑ICG MNPs with NIR laser irradiation lead to significantly enhanced anticancer effects on U‑87 MG glioblastoma cells through the modulation of intrinsic and extrinsic apoptosis genes, including Bcl‑2‑associated X protein, Bcl‑2, cytochrome c, caspase‑3, Fas associated via death domain and caspase‑8. These results suggest that Fe3O4‑TMZ‑ICG MNPs may be potential candidates when administered as chemo‑phototherapy for the treatment of brain cancer.

Grapefruit seed extract effectively inhibits the Candida albicans biofilms development on polymethyl methacrylate denture-base resin

This study aimed to investigate the cleansing effects of grapefruit seed extract (GSE) on biofilms of Candida albicans (C. albicans) formed on denture-base resin and the influence of GSE on the mechanical and surface characteristics of the resin. GSE solution diluted with distilled water to 0.1% (0.1% GSE) and 1% (1% GSE) and solutions with Polident® denture cleansing tablet dissolved in distilled water (Polident) or in 0.1% GSE solution (0.1% G+P) were prepared as cleansing solutions. Discs of acrylic resin were prepared, and the biofilm of C. albicans was formed on the discs. The discs with the biofilm were treated with each solution for 5 min at 25°C. After the treatment, the biofilm on the discs was analyzed using a colony forming unit (CFU) assay, fluorescence microscopy, and scanning electron microscopy (SEM). In order to assess the persistent cleansing effect, the discs treated with each solution for 5 min were aerobically incubated in Yeast Nitrogen Base medium for another 24 h. After incubation, the persistent effect was assessed by CFU assay. Some specimens of acrylic resin were immersed in each solution for 7 days, and changes in surface roughness (Ra), Vickers hardness (VH), flexural strength (FS), and flexural modulus (FM) were evaluated. As a result, the treatment with 1% GSE for 5 min almost completely eliminated the biofilm formed on the resin; whereas, the treatment with 0.1% GSE, Polident, and 0.1% G+P for 5 min showed a statistically significant inhibitory effect on biofilms. In addition, 0.1% GSE and 0.1% G+P exerted a persistent inhibitory effect on biofilms. Fluorescence microscopy indicated that Polident mainly induced the death of yeast, while the cleansing solutions containing at least 0.1% GSE induced the death of hyphae as well as yeast. SEM also revealed that Polident caused wrinkles, shrinkage, and some deep craters predominantly on the cell surfaces of yeast, while the solutions containing at least 0.1% GSE induced wrinkles, shrinkage, and some damage on cell surfaces of not only yeasts but also hyphae. No significant changes in Ra, VH, FS, or FM were observed after immersion in any of the solutions. Taken together, GSE solution is capable of cleansing C. albicans biofilms on denture-base resin and has a persistent inhibitory effect on biofilm development, without any deteriorations of resin surface.

Development of Poly(HEMA-Am) Polymer Hydrogel Filler for Soft Tissue Reconstruction by Facile Polymerization

The number of breast reconstruction surgeries has been increasing due to the increase in mastectomies. Surgical implants (the standard polydimethylsiloxane (PDMS) implants) are widely used to reconstruct breast tissues, however, it can cause problems such as adverse immune reactions, fibrosis, rupture, and additional surgery. Hence, polymeric fillers have recently garnered increasing attention as strong alternatives for breast reconstruction materials. Polymeric fillers offer noninvasive methods of reconstruction, thereby reducing the possible adverse effects and simplifying the treatment. In this study, we synthesized a 2-hydroxylethylmethacrylate (HEMA) and acrylamide (Am) copolymer (Poly(HEMA-Am)) by redox polymerization to be used as a biocompatible filler material for breast reconstruction. The synthesized hydrogel swelled in phosphate buffered saline (PBS) shows an average modulus of 50 Pa, which is a characteristic similar to that of the standard dermal acrylamide filler. To investigate the biocompatibility and cytotoxicity of the Poly(HEMA-Am) hydrogel, we evaluated an in vitro cytotoxicity assay on human fibroblasts (hFBs) and human adipose-derived stem cells (hADSCs) with the hydrogel eluate, and confirmed a cell viability of over 80% of the cell viability with the Poly(HEMA-Am) hydrogel. These results suggest our polymeric hydrogel is a promising filler material in soft tissue augmentation including breast reconstruction.

REST, regulated by RA through miR-29a and the proteasome pathway, plays a crucial role in RPC proliferation and differentiation

One of the primary obstacles in the application of retinal progenitor cells (RPCs) to the treatment of retinal degenerative diseases, such as age-related macular degeneration (AMD) and retinitis pigmentosa (RP), is their limited ability to proliferate and differentiate into specific retinal neurons. In this study, we revealed that repressor element-1-silencing transcription factor (REST), whose expression could be transcriptionally and post-transcriptionally mediated by retinoic acid (RA, one isomeride of a vitamin A derivative used as a differentiation-inducing agent in many disease treatments), plays a pivotal role in the regulation of proliferation and differentiation of RPCs. Our results show that direct knockdown of endogenous REST reduced RPC proliferation but accelerated RPC differentiation toward retinal neurons, which phenocopied the observed effects of RA on RPCs. Further studies disclosed that the expression level of REST could be downregulated by RA not only through upregulating microRNA (miR)-29a, which directly interacted with the 3′-untranslated region (3′-UTR) of the REST mRNA, but also through promoting REST proteasomal degradation. These results show us a novel functional protein, REST, which regulates RPC proliferation and differentiation, can be mediated by RA. Understanding the mechanisms of REST and RA in RPC fate determination enlightens a promising future for the application of REST and RA in the treatment of retinal degeneration diseases.

Biodegradable Polymer Nanoparticles for Photodynamic Therapy by Bioluminescence Resonance Energy Transfer

Conventional photodynamic therapy is severely constrained by the limited light-penetration depth in tissue. Here, we show efficient photodynamic therapy (PDT) mediated by bioluminescence resonance energy transfer (BRET) that overcomes the light-penetration limitation. The photosensitizer Rose Bengal (RB) was loaded in biodegradable poly(lactic-co-glycolic acid) (PLGA) nanoparticles, which were then conjugated with firefly luciferase. Spectroscopic characterizations indicated that BRET effectively activated RB to generate reactive oxygen species (ROS). In vitro studies of the cellular cytotoxicity and photodynamic effect indicated that cancer cells were effectively destroyed by BRET-PDT treatment. In vivo studies in a tumor-bearing mouse model demonstrated that tumor growth was significantly inhibited by BRET-PDT in the absence of external light irradiation. The BRET-mediated phototherapy provides a promising approach to overcome the light-penetration limitation in photodynamic treatment of deep-seated tumors.

Streamlined duplex live-dead microplate assay for cultured cells

A duplex fluorescence assay to assess the viability of cells cultured in multi-well plates is described, which can be carried out in the original culture plate using a plate reader, without exchanges of culture or assay medium, or transfer of cells or cell supernatant. The method uses freshly prepared reagents and does not rely on a proprietary, commercially supplied kit. Following experimental treatment, calcein acetoxymethyl ester (CaAM) is added to each well of cultured cells; after 30 min, the fluorescence intensity (emission λ_max ∼ 530 nm) is measured. The signal is due to formation of calcein, which is produced from CaAM by action of esterase activity found in intact live cells. Since live cells may express plasma membrane multidrug transport proteins, especially of the ABC transporter family, the CaAM incubation is carried out in the presence of an inhibitor of this efflux process, thereby improving the dynamic range of the assay. Next, SYTOX^® Orange (SO) is added to the culture wells, and, after a 30-min incubation, fluorescence intensity (emission λ_max ∼ 590 nm) is measured again. SO is excluded from cells that have an intact plasma membrane, but penetrates dead/dying cells and can diffuse into the nucleus, where it binds to and forms a fluorescent complex with DNA. The CaAM already added to the wells causes no interference with the latter fluorescent signal. At the conclusion of the duplex assay, both live and dead cells remain in the culture wells and can be documented by digital imaging to demonstrate correlation of cellular morphology with the assay output. Two examples of the application of this method are provided, using cytotoxic compounds having different mechanisms of action.

Acute death of astrocytes in blast-exposed rat organotypic hippocampal slice cultures

Blast traumatic brain injury (bTBI) affects civilians, soldiers, and veterans worldwide and presents significant health concerns. The mechanisms of neurodegeneration following bTBI remain elusive and current therapies are largely ineffective. It is important to better characterize blast-evoked cellular changes and underlying mechanisms in order to develop more effective therapies. In the present study, our group utilized rat organotypic hippocampal slice cultures (OHCs) as an in vitro system to model bTBI. OHCs were exposed to either 138 ± 22 kPa (low) or 273 ± 23 kPa (high) overpressures using an open-ended helium-driven shock tube, or were assigned to sham control group. At 2 hours (h) following injury, we have characterized the astrocytic response to a blast overpressure. Immunostaining against the astrocytic marker glial fibrillary acidic protein (GFAP) revealed acute shearing and morphological changes in astrocytes, including clasmatodendrosis. Moreover, overlap of GFAP immunostaining and propidium iodide (PI) indicated astrocytic death. Quantification of the number of dead astrocytes per counting area in the hippocampal cornu Ammonis 1 region (CA1), demonstrated a significant increase in dead astrocytes in the low- and high-blast, compared to sham control OHCs. However only a small number of GFAP-expressing astrocytes were co-labeled with the apoptotic marker Annexin V, suggesting necrosis as the primary type of cell death in the acute phase following blast exposure. Moreover, western blot analyses revealed calpain mediated breakdown of GFAP. The dextran exclusion additionally indicated membrane disruption as a potential mechanism of acute astrocytic death. Furthermore, although blast exposure did not evoke significant changes in glutamate transporter 1 (GLT-1) expression, loss of GLT-1-expressing astrocytes suggests dysregulation of glutamate uptake following injury. Our data illustrate the profound effect of blast overpressure on astrocytes in OHCs at 2 h following injury and suggest increased calpain activity and membrane disruption as potential underlying mechanisms.

Drying of open animal joints in vivo subsequently causes cartilage degeneration

Objectives

During open orthopaedic surgery, joints may be exposed to air, potentially leading to cartilage drying and chondrocyte death, however, the long-term effects of joint drying in vivo are poorly understood. We used an animal model to investigate the subsequent effects of joint drying on cartilage and chondrocytes.

Methods

The patellar groove of anaesthetised rats was exposed (sham-operated), or exposed and then subjected to laminar airflow (0.25m/s; 60 minutes) before wounds were sutured and animals recovered. Animals were monitored for up to eight weeks and then sacrificed. Cartilage and chondrocyte properties were studied by histology and confocal microscopy, respectively.

Results

Joint drying caused extensive chondrocyte death within the superficial regions of cartilage. Histology of dried cartilage demonstrated a loss of surface integrity at four weeks, fibrillations at eight weeks, and an increased modified Mankin score (p < 0.001). Cartilage thickness increased (p < 0.001), whereas chondrocyte density decreased at four weeks (p < 0.001), but then increased towards sham-operated levels (p < 0.01) at eight weeks. By week eight, chondrocyte pairing/clustering and cell volume increased (p < 0.05; p < 0.001, respectively).

Conclusions

These in vivo results demonstrated for the first time that as a result of laminar airflow, cartilage degeneration occurred which has characteristics similar to those seen in early osteoarthritis. Maintenance of adequate cartilage hydration during open orthopaedic surgery is therefore of paramount importance.

Cite this article: Dr A. Hall. Drying of open animal joints in vivo subsequently causes cartilage degeneration. Bone Joint Res 2016;5:137–144. DOI: 10.1302/2046-3758.54.2000594.

Decellularized human placenta chorion matrix as a favorable source of small-diameter vascular grafts

Biomaterials based on decellularized tissues are increasingly attracting attention as functional alternatives to other natural or synthetic materials. However, a source of non-cadaver human allograft material would be favorable. Here we establish a decellularization method of vascular tissue from cryopreserved human placenta chorionic plate starting with an initial freeze-thaw step followed by a series of chemical treatments applied with a custom-made perfusion system. This novel pulsatile perfusion set-up enabled us to successfully decellularize the vascular tissue with lower concentrations of chemicals and shorter exposure times compared to a non-perfusion process. The decellularization procedure described here lead to the preservation of the native extracellular matrix architecture and the removal of cells. Quantitative analysis revealed no significant changes in collagen content and a retained glycosaminoglycan content of approximately 29%. In strain-to-failure tests, the decellularized grafts showed similar mechanical behavior compared to native controls. In addition, the mechanical values for ultimate tensile strength and stiffness were in an acceptable range for in vivo applications. Furthermore, biocompatibility of the decellularized tissue and its recellularizationability to serve as an adequate substratum for upcoming recellularization strategies using primary human umbilical vein endothelial cells (HUVECs) was demonstrated. HUVECs cultured on the decellularized placenta vessel matrix performed endothelialization and maintained phenotypical characteristics and cell specific expression patterns. Overall, the decellularized human placenta vessels can be a versatile tool for experimental studies on vascularization and as potent graft material for future in vivo applications.

STATEMENT OF SIGNIFICANCE

In the US alone more than 1million vascular grafts are needed in clinical practice every year. Despite severe disadvantages, such as donor site morbidity, autologous grafting from the patient's own arteries or veins is regarded as the gold standard for vascular tissue repair. Besides, strategies based on synthetic or natural materials have shown limited success. Tissue engineering approaches based on decellularized tissues are regarded as a promising alternative to clinically used treatments to overcome the observed limitations. However, a source for supply of non-cadaver human allograft material would be favorable. Here, we established a decellularization method of vascular tissue from the human placenta chorionic plate, a suitable human tissue source of consistent quality. The decellularized human placenta vessels can be a potent graft material for future in vivo applications and furthermore might be a versatile tool for experimental studies on vascularization.

Effects of blast overpressure on neurons and glial cells in rat organotypic hippocampal slice cultures

Due to recent involvement in military conflicts, and an increase in the use of explosives, there has been an escalation in the incidence of blast-induced traumatic brain injury (bTBI) among US military personnel. Having a better understanding of the cellular and molecular cascade of events in bTBI is prerequisite for the development of an effective therapy that currently is unavailable. The present study utilized organotypic hippocampal slice cultures (OHCs) exposed to blast overpressures of 150 kPa (low) and 280 kPa (high) as an in vitro bTBI model. Using this model, we further characterized the cellular effects of the blast injury. Blast-evoked cell death was visualized by a propidium iodide (PI) uptake assay as early as 2 h post-injury. Quantification of PI staining in the cornu Ammonis 1 and 3 (CA1 and CA3) and the dentate gyrus regions of the hippocampus at 2, 24, 48, and 72 h following blast exposure revealed significant time dependent effects. OHCs exposed to 150 kPa demonstrated a slow increase in cell death plateauing between 24 and 48 h, while OHCs from the high-blast group exhibited a rapid increase in cell death already at 2 h, peaking at ~24 h post-injury. Measurements of lactate dehydrogenase release into the culture medium also revealed a significant increase in cell lysis in both low- and high-blast groups compared to sham controls. OHCs were fixed at 72 h post-injury and immunostained for markers against neurons, astrocytes, and microglia. Labeling OHCs with PI, neuronal, and glial markers revealed that the blast-evoked extensive neuronal death and to a lesser extent loss of glial cells. Furthermore, our data demonstrated activation of astrocytes and microglial cells in low- and high-blasted OHCs, which reached a statistically significant difference in the high-blast group. These data confirmed that our in vitro bTBI model is a useful tool for studying cellular and molecular changes after blast exposure.

Transport-limited electrochemical formation of long nanosharp probes from tungsten

We show that electrochemical formation of long probes with nanosharp tips can be controlled by choosing an appropriate thermodynamic pathway of metal to metal oxide and hydroxide transformation. Currently, convection-limited electropolishing (CLE) is extensively used. Nanosharp probes are produced by electrochemically etching a wire until it breaks into two pieces. This process is difficult to control because of the complexity of the associated hydrodynamic flows. We introduce transport-limited electropolishing (TLE), where the electrochemical reaction results in the formation of metal oxides and hydroxides which form a porous surface layer hindering the flow of electrolyte. The developed TLE method enables one to make long tapered needles. The taper can spread over more than 6 mm while the radius of tip curvature can be decreased down to 30 nm. These needles are strong and were successfully applied for piercing single smooth vascular muscle cells.

Quantitative assessment of cell viability based on flow cytometry and microscopy

We compare flow cytometric and microscopic determination of cell viability by fluorescence labeling using calcein acetoxy-methyl-ester and ethidium homodimer-1 as live and dead stain, respectively. Peripheral blood monocytes served as model system and were accumulated applying density gradients. Subsequently, monocytes were further enriched by magnetic-activated or fluorescence-activated cell sorting (MACS, FACS) targeting the antigen CD14. Identical samples were used for flow cytometric and microscopic analysis to allow direct comparison of both analysis methods. More than 1,000 cells were measured for each sample to minimize the measurement uncertainty caused by counting statistics. We observed good agreement of flow cytometric and microscopic viability measurements. On average, the difference in viability measured by flow cytometry and microscopy amounted to (2.7 ± 1.4)% for live staining and (1.7 ± 1.2)% for dead staining. These deviations were similar to the uncertainty of measurement for cell viability, thus demonstrating that both methods delivered equal results. Besides monocytes, comparison of flow cytometric and microscopy viability for MACS enriched CD34-positive cells also showed consistent results.