Theoretical Calculations on the Feasibility of Microalgal Biofuels: Utilization of Marine Resources Could Help Realizing the Potential of Microalgae

Identification of Antioxidative Peptides Derived from Arthrospira maxima in the Biorefinery Process after Extraction of C-Phycocyanin and Lipids

Arthrospira maxima has been identified as a sustainable source of rich proteins with diverse functionalities and bioactivities. After extracting C-phycocyanin (C-PC) and lipids in a biorefinery process, the spent biomass still contains a large proportion of proteins with potential for biopeptide production. In this study, the residue was digested using Papain, Alcalase, Trypsin, Protamex 1.6, and Alcalase 2.4 L at different time intervals. The resulting hydrolyzed product with the highest antioxidative activity, evaluated through their scavenging capability of hydroxyl radicals, superoxide anion, 2,2-diphenyl-1-picrylhydrazyl (DPPH), and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid (ABTS), was selected for further fractionation and purification to isolate and identify biopeptides. Alcalase 2.4 L was found to produce the highest antioxidative hydrolysate product after four-hour hydrolysis. Fractionating this bioactive product using ultrafiltration obtained two fractions with different molecular weights (MW) and antioxidative activity. The low-molecular-weight fraction (LMWF) with MW <3 kDa had higher DPPH scavenging activity with the IC50 value of 2.97 ± 0.33 compared to 3.76 ± 0.15 mg/mL of the high-molecular-weight fraction (HMWF) with MW >3 kDa. Two stronger antioxidative fractions (F-A and F-B) with the respective significant lower IC50 values of 0.83 ± 0.22 and 1.52 ± 0.29 mg/mL were isolated from the LMWF using gel filtration with a Sephadex G-25 column. Based on LC-MS/MS analysis of the F-A, 230 peptides derived from 108 A. maxima proteins were determined. Notably, different antioxidative peptides possessing various bioactivities, including antioxidation, were detected with high predicted scores together with in silico analyses on their stability and toxicity. This study established knowledge and technology to further value-add to the spent A. maxima biomass by optimizing hydrolysis and fraction processes to produce antioxidative peptides with Alcalase 2.4 L after two products already produced in a biorefinery. These bioactive peptides have potential applications in food and nutraceutical products.

Sustainable Microalgae and Cyanobacteria Biotechnology

Marine organisms are a valuable source of new compounds, many of which have remarkable biotechnological properties, such as microalgae and cyanobacteria, which have attracted special attention to develop new industrial production routes. These organisms are a source of many biologically active molecules in nature, including antioxidants, immunostimulants, antivirals, antibiotics, hemagglutinates, polyunsaturated fatty acids, peptides, proteins, biofuels, and pigments. The use of several technologies to improve biomass production, in the first step, industrial processes schemes have been addressed with different accomplishments. It is critical to consider all steps involved in producing a bioactive valuable compound, such as species and strain selection, nutrient supply required to support productivity, type of photobioreactor, downstream processes, namely extraction, recovery, and purification. In general, two product production schemes can be mentioned; one for large amounts of product, such as biodiesel or any other biofuel and the biomass for feeding purposes; the other for when the product will be used in the human health domain, such as antivirals, antibiotics, antioxidants, etc. Several applications for microalgae have been documented. In general, the usefulness of an application for each species of microalgae is determined by growth and product production. Furthermore, the use of OMICS technologies enabled the development of a new design for human therapeutic recombinant proteins, including strain selection based on previous proteomic profiles, gene cloning, and the development of expression networks. Microalgal expression systems have an advantage over traditional microbial, plant, and mammalian expression systems for new and sustainable microalga applications, for responsible production and consumption.

Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development

Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.

Isolation, mass cultivation, and biodiesel production potential of marine microalgae identified from Bay of Bengal

In this study, marine microalgae were isolated from the Bay of Bengal, and their biodiesel production potential was investigated. Five different strains of microalgae were identified, viz. Nannochloropsis salina (N. salina), Dunaliella salina (D. salina), Chaetoceros calcitrans (C. calcitrans), Tetraselmis chuii (T. chuii), and Euglena sanguinea (E. sanguinea). Further, these stains were mass cultivated in a 250-L bioreactor to assess their biomass production ability. At the end of the exponential phase, algal biomass was harvested for lipid extraction. The fatty acid profile and physico-chemical properties of the lipids were analyzed. It was observed that a maximum of 27.67wt% of lipid was obtained for N. salina followed by D. salina (22.58 wt%), E. sanguinea (21.88 wt%), T. chuii (20.15 wt%), and C. calcitrans (16.25 wt%). Subsequently, the extracted lipids were subjected to single-step esterification and transesterification process to produce biodiesel by using an acid catalyst. The different parameters influencing the reaction such as catalyst concentration, temperature, methanol to lipid molar ratio, and time were investigated. A maximum biodiesel yield of 97, 94, 96, 92, and 92 wt% were obtained for N. salina, D. salina, C. calcitrans, T. chuii, and E. sanguinea, respectively, at the favorable reaction conditions. The fuel properties of biodiesel were analyzed as per the standard protocol and compared with ASTM D6751 standard.

Marine Microalgae Contribution to Sustainable Development

The burning of fossil fuels is an unsustainable activity, which is leading to an increase in greenhouse gases (GHGs) emissions and related global warming. Among sustainable energy sources, microalgae represent a promising alternative to fossil fuel and contribute to the achievement of important Sustainable Development Goals (SDGs). In particular, the potential contribution of marine microalgae to sustainable development is large as, among other benefits, they represent a carbon negative energy source and may be applied in many coastal areas around the world. Despite this, significant economic and technological improvements are needed in order to make microalgae biofuels viable on a large scale. This review aims to explore how and to what extent third-generation biofuels (marine microalgae, but also the latest advances in freshwater microalgae) can benefit the realization of these SDGs. From this study we concluded that the production of large-scale marine microalgae biofuels is not yet feasible from the economic perspective at a large scale. However, the cultivation of microalgae in seawater holds great potential for increasing the small to medium viability of this biofuel source. The possibilities for improvement along with the contributions to sustainable development lay the groundwork for continuing to study and apply the potential of sustainable production of microalgae bioenergy.

Seawater supplemented with bicarbonate for efficient marine microalgae production in floating photobioreactor on ocean: A case study of Chlorella sp

Cultivation of microalgae on ocean provides a promising way to produce massive biomass without utilizing limited land space, and using seawater as culture medium can avoid consumption of valuable fresh water. Bicarbonate is proved as a better approach for carbon supply in microalgae cultivation, but Ca²⁺ and Mg²⁺ in seawater is subjected to precipitate with carbonate derived from it. In this study, cultivation with this medium for a marine Chlorella sp. resulted in productivity of 0.470 g L^-1 day^-1, despite of continual precipitation caused by increased pH due to bicarbonate consumption. Actually, this precipitation is favorable, since it can work as a flocculation harvesting method for microalgae. The highest flocculation efficiency of 98.9 ± 0.0% was observed in cultures with 7.0 g L^-1 NaHCO₃, which was higher than that of cultures without bicarbonate (44.1 ± 0.2%). Additionally, the spent medium after flocculation supported better growth (1.60 ± 0.0 g L^-1) than the fresh medium (1.26 ± 0.0 g L^-1). Outdoor cultivation with floating photobioreactor on ocean resulted in the productivity of 0.190 g L^-1 day^-1, which was higher than that in land-based culture systems. The floating system also benefited from better temperature control with range from 20.6 to 37.2 °C, due to solar heating and surrounding water cooling. These results showed feasibility of efficient microalgae biomass production with fully utilizing of ocean resources, including culture medium preparation and temperature control with seawater, as well as wave energy for mixing, holding great potential to produce massive biomass to support sustainable development of human society.

The potential of quantitative models to improve microalgae photosynthetic efficiency

The massive increase in carbon dioxide concentration in the atmosphere driven by human activities is causing huge negative consequences and new sustainable sources of energy, food and materials are highly needed. Algae are unicellular photosynthetic microorganisms that can provide a highly strategic contribution to this challenge as alternative source of biomass to complement crops cultivation. Algae industrial cultures are commonly limited by light availability, and biomass accumulation is strongly dependent on their photon-to-biomass conversion efficiency. Investigation of algae photosynthetic metabolism is thus strategic for the generation of more efficient strains with higher productivity. Algae are cultivated at industrial scale in conditions highly different from the natural niches they adapted to and strains development efforts must fully consider the seminal influence on productivity of regulatory mechanism of photosynthesis as well as of cultivation parameters like cells concentration, light distribution in the culture, mixing, nutrients and carbon dioxide availability. In this review we will focus in particular on how mathematical models can account for the complex influence of all environmental parameters and can be exploited for development of improved algae strains.

The lipid biochemistry of eukaryotic algae

Algal lipid metabolism fascinates both scientists and entrepreneurs due to the large diversity of fatty acyl structures that algae produce. Algae have therefore long been studied as sources of genes for novel fatty acids; and, due to their superior biomass productivity, algae are also considered a potential feedstock for biofuels. However, a major issue in a commercially viable "algal oil-to-biofuel" industry is the high production cost, because most algal species only produce large amounts of oils after being exposed to stress conditions. Recent studies have therefore focused on the identification of factors involved in TAG metabolism, on the subcellular organization of lipid pathways, and on interactions between organelles. This has been accompanied by the development of genetic/genomic and synthetic biological tools not only for the reference green alga Chlamydomonas reinhardtii but also for Nannochloropsis spp. and Phaeodactylum tricornutum. Advances in our understanding of enzymes and regulatory proteins of acyl lipid biosynthesis and turnover are described herein with a focus on carbon and energetic aspects. We also summarize how changes in environmental factors can impact lipid metabolism and describe present and potential industrial uses of algal lipids.

Targeted knockout of phospholipase A2 to increase lipid productivity in Chlamydomonas reinhardtii for biodiesel production

Biofuel derived from microalgae have several advantages over other oleaginous crops, however, still needs to be improved with its cost aspect and can be achieved by developing of a strain with improved lipid productivity. In this study, the CRISPR-Cas9 system was incorporated to carry out a target-specific knockout of the phospholipase A₂ gene in Chlamydomonas reinhardtii. The targeted gene encodes a key enzyme in the Lands cycle. As a result, the mutants showed a characteristic of increased diacylglycerol pool, followed by a higher accumulation of triacylglycerol without being significantly compensated with the cell growth. As a result, the overall lipid productivities of phospholipase A₂ knockout mutants have increased by up to 64.25% (to 80.92 g L^-1 d^-1). This study can provide crucial information for the biodiesel industry.

Draft genome sequence and detailed characterization of biofuel production by oleaginous microalga Scenedesmus quadricauda LWG002611

BACKGROUND

Due to scarcity of fossil fuel, the importance of alternative energy sources is ever increasing. The oleaginous microalgae have demonstrated their potential as an alternative source of energy, but have not achieved commercialization owing to some biological and technical inefficiency. Modern methods of recombinant strain development for improved efficacy are suffering due to inadequate knowledge of genome and limited molecular tools available for their manipulation.

RESULTS

In the present study, microalga Scenedesmus quadricauda LWG002611 was selected as the preferred organism for lipid production as it contained high biomass (0.37 g L-1 day-1) and lipid (102 mg L-1 day-1), compared to other oleaginous algae examined in the present study as well as earlier reports. It possessed suitable biodiesel properties as per the range defined by the European biodiesel standard EN14214 and petro-diesel standard EN590:2013. To investigate the potential of S. quadricauda LWG002611 in details, the genome of the organism was assembled and annotated. This was the first genome sequencing and assembly of S. quadricauda, which predicted a genome size of 65.35 Mb with 13,514 genes identified by de novo and 16,739 genes identified by reference guided annotation. Comparative genomics revealed that it belongs to class Chlorophyceae and order Sphaeropleales. Further, small subunit ribosomal RNA gene (18S rRNA) sequencing was carried out to confirm its molecular identification. S. quadricauda LWG002611 exhibited higher number of genes related to major activities compared to other potential algae reported earlier with a total of 283 genes identified in lipid metabolism. Metabolic pathways were reconstructed and multiple gene homologs responsible for carbon fixation and triacylglycerol (TAG) biosynthesis pathway were identified to further improve this potential algal strain for biofuel production by metabolic engineering approaches.

CONCLUSION

Here we present the first draft genome sequence, genetic characterization and comparative evaluation of S. quadricauda LWG002611 which exhibit high biomass as well as high lipid productivity. The knowledge of genome sequence, reconstructed metabolic pathways and identification of rate-limiting steps in TAG biosynthesis pathway will strengthen the development of molecular tools towards further improving this potentially one of the major algal strains for biofuel production.

The promising future of microalgae: current status, challenges, and optimization of a sustainable and renewable industry for biofuels, feed, and other products

Microalgae have recently attracted considerable interest worldwide, due to their extensive application potential in the renewable energy, biopharmaceutical, and nutraceutical industries. Microalgae are renewable, sustainable, and economical sources of biofuels, bioactive medicinal products, and food ingredients. Several microalgae species have been investigated for their potential as value-added products with remarkable pharmacological and biological qualities. As biofuels, they are a perfect substitute to liquid fossil fuels with respect to cost, renewability, and environmental concerns. Microalgae have a significant ability to convert atmospheric CO2 to useful products such as carbohydrates, lipids, and other bioactive metabolites. Although microalgae are feasible sources for bioenergy and biopharmaceuticals in general, some limitations and challenges remain, which must be overcome to upgrade the technology from pilot-phase to industrial level. The most challenging and crucial issues are enhancing microalgae growth rate and product synthesis, dewatering algae culture for biomass production, pretreating biomass, and optimizing the fermentation process in case of algal bioethanol production. The present review describes the advantages of microalgae for the production of biofuels and various bioactive compounds and discusses culturing parameters.

Algae to Economically Viable Low-Carbon-Footprint Oil

Algal oil as an alternative to fossil fuel has attracted attention since the 1940s, when it was discovered that many microalgae species can produce large amounts of lipids. Economics and energy security were the motivational factors for a spurt in algae research during the 1970s, 1990s, and early 2000s. Whenever crude prices declined, research on algae stopped. The scenario today is different. Even given low and volatile crude prices ($30-$50/barrel), interest in algae continues all over the world. Algae, with their cure-all characteristics, have the potential to provide sustainable solutions to problems in the energy-food-climate nexus. However, after years of effort, there are no signs of algae-to-biofuel technology being commercialized. This article critically reviews past work; summarizes the current status of the technology; and based on the lessons learned, provides a balanced perspective on a potential path toward commercialization of algae-to-oil technology.