Pulsed addition of limiting-carbon during Aspergillus oryzae fermentation leads to improved productivity of a recombinant enzyme

An industrial perspective on metabolic responses of Penicillium chrysogenum to periodic dissolved oxygen feast-famine cycles in a scale-down system

While traveling through different zones in large-scale bioreactors, microbes are most likely subjected to fluctuating dissolved oxygen (DO) conditions at the timescales of global circulation time. In this study, to mimic industrial-scale spatial DO gradients, we present a scale-down setup based on dynamic feast/famine regime (150 s) that leads to repetitive cycles with rapid changes in DO availability in glucose-limited chemostat cultures of Penicillium chrysogenum. Such DO feast/famine regime induced a stable and repetitive pattern with a reproducible metabolic response in time, and the dynamic response of intracellular metabolites featured specific differences in terms of both coverage and magnitude in comparison to other dynamic conditions, for example, substrate feast/famine cycles. Remarkably, intracellular sugar polyols were considerably increased as the hallmark metabolites along with a dynamic and higher redox state (NADH/NAD+) of the cytosol. Despite the increased availability of NADPH for penicillin production under the oscillatory DO conditions, this positive effect may be counteracted by the decreased ATP supply. Moreover, it is interesting to note that not only the penicillin productivity was reduced under such oscillating DO conditions, but also that of the unrecyclable byproduct ortho-hydroxyphenyl acetic acid and degeneration of penicillin productivity. Furthermore, dynamic flux profiles showed the most pronounced variations in central carbon metabolism, amino acid (AA) metabolism, energy metabolism and fatty acid metabolism upon the DO oscillation. Taken together, the metabolic responses of P. chrysogenum to DO gradients reported here are important for elucidating metabolic regulation mechanisms, improving bioreactor design and scale-up procedures as well as for constructing robust cell strains to cope with heterogenous industrial culture conditions.

Myco-remediation: A mechanistic understanding of contaminants alleviation from natural environment and future prospect

Industrialization and modernization of agricultural systems contaminated lithosphere, hydrosphere, and biosphere of the Earth. Sustainable remediation of contamination is essential for environmental sustainability. Myco-remediation is proposed to be a green, economical, and efficient technology over conventional remediation technologies to combat escalating pollution problems at a global scale. Fungi can perform remediation of pollutants through several mechanisms like biosorption, precipitation, biotransformation, and sequestration. Myco-remediation significantly removes or degrades metal metals, persistent organic pollutants, and other emerging pollutants. The current review highlights the species-specific remediation potential, influencing factors, genetic and molecular control mechanism, applicability merits to enhance the bioremediation efficiency. Structure and composition of fungal cell wall is crucial for immobilization of toxic pollutants and a subtle change on fungal cell wall structure may significantly affect the immobilization efficiency. The utilization protocol and applicability of enzyme engineering and myco-nanotechnology to enhance the bioremediation efficiency of any potential fungus was proposed. It is advocated that the association of hyper-accumulator plants with plant growth-promoting fungi could help in an effective cleanup strategy for the alleviation of persistent soil pollutants. The functions, activity, and regulation of fungal enzymes in myco-remediation practices required further research to enhance the myco-remediation potential. Study of the biotransformation mechanisms and risk assessment of the products formed are required to minimize environmental pollution. Recent advancements in molecular "Omic techniques"and biotechnological tools can further upgrade myco-remediation efficiency in polluted soils and water.

Reducing phenotypic instabilities of a microbial population during continuous cultivation based on cell switching dynamics

Predicting the fate of individual cells among a microbial population (i.e., growth and gene expression) remains a challenge, especially when this population is exposed to very dynamic environmental conditions, such as those encountered during continuous cultivation. Indeed, the dynamic nature of a continuous cultivation process implies the potential diversification of the microbial population resulting in genotypic and phenotypic heterogeneity. The present work focused on the induction of the arabinose operon in Escherichia coli as a model system to study this diversification process in continuous cultivations. As a preliminary step, the green fluorescent protein (GFP) level triggered by an arabinose-inducible ParaBAD promoter was tracked by flow cytometry in chemostat cultivations with glucose-arabinose co-feeding. For a wide range of glucose-arabinose co-feeding concentrations in the chemostats, the simultaneous occurrence of GFP positive and negative subpopulation was observed. In the second set of experiments, continuous cultivation was performed by adding glucose continuously and arabinose based on the capability of individual cells to switch from low GFP to high GFP expression states, performed with a technology setup called segregostat. In the segregostat cultivation mode, on-line flow cytometry analysis was used for adjusting the arabinose/glucose transitions based on the phenotypic switching profiles of the microbial population. This strategy allowed finding an appropriate arabinose pulsing frequency, leading to prolonged maintenance of the induction level with a limited increase in the phenotypic diversity for more than 60 generations. The results suggest that the steady forcing of individual cells into a given phenotypic trajectory may not be the best strategy for controlling cell populations. Instead, allowing individual cells to switch periodically around a predefined threshold seems to be a more robust strategy leading to oscillations, but within a predictable cell population behavior range.

Lipid production by oleaginous yeasts

Microbial lipid production has been studied extensively for years; however, lipid metabolic engineering in many of the extraordinarily high lipid-accumulating yeasts was impeded by inadequate understanding of the metabolic pathways including regulatory mechanisms defining their oleaginicity and the limited genetic tools available. The aim of this review is to highlight the prominent oleaginous yeast genera, emphasizing their oleaginous characteristics, in conjunction with diverse other features such as cheap carbon source utilization, withstanding the effect of inhibitory compounds, commercially favorable fatty acid composition-all supporting their future development as economically viable lipid feedstock. The unique aspects of metabolism attributing to their oleaginicity are accentuated in the pretext of outlining the various strategies successfully implemented to improve the production of lipid and lipid-derived metabolites. A large number of in silico data generated on the lipid accumulation in certain oleaginous yeasts have been carefully curated, as suggestive evidences in line with the exceptional oleaginicity of these organisms. The different genetic elements developed in these yeasts to execute such strategies have been scrupulously inspected, underlining the major types of newly-found and synthetically constructed promoters, transcription terminators, and selection markers. Additionally, there is a plethora of advanced genetic toolboxes and techniques described, which have been successfully used in oleaginous yeasts in the recent years, promoting homologous recombination, genome editing, DNA assembly, and transformation at remarkable efficiencies. They can accelerate and effectively guide the rational designing of system-wide metabolic engineering approaches pinpointing the key targets for developing industrially suitable yeast strains.

Reduced viscosity mutants of Trichoderma reesei with improved industrial fermentation characteristics

Morphological mutants of Trichoderma reesei were isolated following chemical or insertional mutagenesis. The mutant strains were shown to have reduced viscosity under industrially relevant fermentation conditions and to have maintained high specific productivity of secreted protein. This allowed higher biomass concentration to be maintained during the production phase and, consequently, increased volumetric productivity of secreted protein. The causative mutations were traced to four individual genes (designated sfb3, ssb7, seb1, and mpg1). We showed that two of the morphological mutations could be combined in a single strain to further reduce viscosity and enable a 100% increase in volumetric productivity.

Dynamic response of Aspergillus niger to periodical glucose pulse stimuli in chemostat cultures

In industrial large-scale bioreactors, microorganisms encounter heterogeneous substrate concentration conditions, which can impact growth or product formation. Here we carried out an extended (12 h) experiment of repeated glucose pulsing with a 10-min period to simulate fluctuating glucose concentrations with Aspergillus niger producing glucoamylase, and investigated its dynamic response by rapid sampling and quantitative metabolomics. The 10-min period represents worst-case conditions, as in industrial bioreactors the average cycling duration is usually in the order of 1 min. We found that cell growth and the glucoamylase productivity were not significantly affected, despite striking metabolomic dynamics. Periodical dynamic responses were found across all central carbon metabolism pathways, with different time scales, and the frequently reported ATP paradox was confirmed for this A. niger strain under the dynamic conditions. A thermodynamics analysis revealed that several reactions of the central carbon metabolism remained in equilibrium even under periodical dynamic conditions. The dynamic response profiles of the intracellular metabolites did not change during the pulse exposure, showing no significant adaptation of the strain to the more than 60 perturbation cycles applied. The apparent high tolerance of the glucoamylase producing A. niger strain for extreme variations in the glucose availability presents valuable information for the design of robust industrial microbial hosts.

Spatial induction of genes encoding secreted proteins in micro-colonies of Aspergillus niger

Aspergillus niger is used by the industry to produce enzymes and metabolites such as citric acid. In liquid cultures, it can grow as a dispersed mycelium or as micro-colonies with a width in the micrometer to millimeter range. Here, it was assessed whether expression of genes encoding secreted enzymes depends on mycelium morphology. To this end, expression of the reporter gene gfp from the promoters of the glucoamylase gene glaA, the feruloyl esterase gene faeA and the α-glucuronidase gene aguA was causally related to micro-colony size within a liquid shaken culture. Data could be fitted by hyperbolic functions, implying that the genes encoding these secreted proteins are expressed in a shell at the periphery of the micro-colony. The presence of such a shell was confirmed by confocal microscopy. Modelling predicted that the width of these zones was 13 to 156 µm depending on growth medium and micro-colony diameter. Together, data indicate that the highest productive micro-colonies are those colonies that have a radius ≤ the width of the peripheral expression zone.

Comparative performance of different scale-down simulators of substrate gradients in Penicillium chrysogenum cultures: the need of a biological systems response analysis

In a 54 m³ large‐scale penicillin fermentor, the cells experience substrate gradient cycles at the timescales of global mixing time about 20–40 s. Here, we used an intermittent feeding regime (IFR) and a two‐compartment reactor (TCR) to mimic these substrate gradients at laboratory‐scale continuous cultures. The IFR was applied to simulate substrate dynamics experienced by the cells at full scale at timescales of tens of seconds to minutes (30 s, 3 min and 6 min), while the TCR was designed to simulate substrate gradients at an applied mean residence time (τc) of 6 min. A biological systems analysis of the response of an industrial high‐yielding P. chrysogenum strain has been performed in these continuous cultures. Compared to an undisturbed continuous feeding regime in a single reactor, the penicillin productivity (q_PenG) was reduced in all scale‐down simulators. The dynamic metabolomics data indicated that in the IFRs, the cells accumulated high levels of the central metabolites during the feast phase to actively cope with external substrate deprivation during the famine phase. In contrast, in the TCR system, the storage pool (e.g. mannitol and arabitol) constituted a large contribution of carbon supply in the non‐feed compartment. Further, transcript analysis revealed that all scale‐down simulators gave different expression levels of the glucose/hexose transporter genes and the penicillin gene clusters. The results showed that q_PenG did not correlate well with exposure to the substrate regimes (excess, limitation and starvation), but there was a clear inverse relation between q_PenG and the intracellular glucose level.

A fast and simple method to estimate relative, hyphal tensile-strength of filamentous fungi used to assess the effect of autophagy

Fungal hyphal strength is an important phenotype which can have a profound impact on bioprocess behavior. Until now, there is not an efficient method which allows its characterization. Currently available methods are very time consuming, thus, compromising their applicability in strain selection and process development. To overcome this issue, a method for fast and easy, statistically verified quantification of relative hyphal tensile strength was developed. It involves off-line fragmentation in a high shear mixer followed by quantification of fragment size using laser diffraction. Particle size distribution (PSD) is determined, with analysis time on the order of minutes. Plots of PSD 90th percentile versus time allow estimation of the specific fragmentation rate. This novel method is demonstrated by estimating relative hyphal strength during growth in control conditions and rapamycin-induced autophagy for Aspergillus nidulans (parental strain) and a mutant strain (ΔAnatg8) lacking an important autophagy gene. Both strains were grown in shake flasks and relative hyphal tensile strength was compared. The mutant strain grown in control conditions appears to be weaker than the parental strain, suggesting that Anatg8 may play a role in other processes involving cell wall biosynthesis. Furthermore, rapamycin-induced autophagy resulted in apparently weaker cells even for the mutant strain. These findings confirm the utility of the developed method in strain selection and process development.

Significant decrease of broth viscosity and glucose consumption in erythromycin fermentation by dynamic regulation of ammonium sulfate and phosphate

In this study, the effects of nitrogen sources on broth viscosity and glucose consumption in erythromycin fermentation were investigated. By controlling ammonium sulfate concentration, broth viscosity and glucose consumption were decreased by 18.2% and 61.6%, respectively, whereas erythromycin biosynthesis was little affected. Furthermore, erythromycin A production was increased by 8.7% still with characteristics of low broth viscosity and glucose consumption through the rational regulations of phosphate salt, soybean meal and ammonium sulfate. It was found that ammonium sulfate could effectively control proteinase activity, which was correlated with the utilization of soybean meal as well as cell growth. The pollets formation contributed much to the decrease of broth viscosity. The accumulation of extracellular propionate and succinate under the new regulation strategy indicated that higher propanol consumption might increase the concentration of methylmalonyl-CoA and propionyl-CoA and thus could increase the flux leading to erythromycin A.

Heterogeneity in liquid shaken cultures of Aspergillus niger inoculated with melanised conidia or conidia of pigmentation mutants

Black pigmented conidia of Aspergillus niger give rise to micro-colonies when incubated in liquid shaken medium. These micro-colonies are heterogeneous with respect to gene expression and size. We here studied the biophysical properties of the conidia of a control strain and of strains in which the fwnA, olvA or brnA gene is inactivated. These strains form fawn-, olive-, and brown-coloured conidia, respectively. The ΔolvA strain produced larger conidia (3.8 μm) when compared to the other strains (3.2-3.3 μm). Moreover, the conidia of the ΔolvA strain were highly hydrophilic, whereas those of the other strains were hydrophobic. The zeta potential of the ΔolvA conidia in medium was also more negative when compared to the control strain. This was accompanied by the near absence of a rodlet layer of hydrophobins. Using the Complex Object Parametric Analyzer and Sorter it was shown that the ratio of individual hyphae and micro-colonies in liquid shaken cultures of the deletion strains was lower when compared to the control strain. The average size of the micro-colonies of the control strain was also smaller (628 μm) than that of the deletion strains (790-858 μm). The size distribution of the micro-colonies of the ΔfwnA strain was normally distributed, while that of the other strains could be explained by assuming a population of small and a population of large micro-colonies. In the last set of experiments it was shown that relative expression levels of gpdA, and AmyR and XlnR regulated genes correlate in individual hyphae at the periphery of micro-colonies. This indicates the existence of transcriptionally and translationally highly active and lowly active hyphae as was previously shown in macro-colonies. However, the existence of distinct populations of hyphae with high and low transcriptional and translational activity seems to be less robust when compared to macro-colonies grown on solid medium.

Enzymatic resolution of racemic phenyloxirane by a novel epoxide hydrolase from Aspergillus niger SQ-6 and its fed-batch fermentation

A microorganism with the ability to catalyze the resolution of racemic phenyloxirane was isolated and identified as Aspergillus niger SQ-6. Chiral capillary electrophoresis was successfully applied to separate both phenyloxirane and phenylethanediol. The epoxide hydrolase (EH) involved in this resolution process was (R)-stereospecific and constitutively expressed. When whole cells were used during the biotransformation process, the optimum temperature and pH for stereospecific vicinal diol production were 35 degrees C and 7.0, respectively. After a 24-h conversion, the enantiomer excess of (R)-phenylethanediol produced was found to be >99%, with a conversion rate of 56%. In fed-batch fermentations at 30 degrees C for 44 h, glycerol (20 g L(-1)) and corn steep liquor (CSL) (30 g L(-1)) were chosen as the best initial carbon and nitrogen sources, and EH production was markedly improved by pulsed feeding of sucrose (2 g L(-1) h(-1)) and continuous feeding of CSL (1 g L(-1) h(-1)) at a fermentation time of 28 h. After optimization, the maximum dry cell weight achieved was 24.5+/-0.8 g L(-1); maximum EH production was 351.2+/-13.1 U L(-1) with a specific activity of 14.3+/-0.5 U g(-1). Partially purified EH exhibited a temperature optimum at 37 degrees C and pH optimum at 7.5 in 0.1 M phosphate buffer. This study presents the first evidence for the existence of a predicted epoxide racemase, which might be important in the synthesis of epoxide intermediates.

Effect of cycle time on fungal morphology, broth rheology, and recombinant enzyme productivity during pulsed addition of limiting carbon source

For many years, high broth viscosity has remained a key challenge in large-scale filamentous fungal fermentations. In previous studies, we showed that broth viscosity could be reduced by pulsed addition of limiting carbon during fed-batch fermentation. The objective in this study was to determine how changing the frequency of pulsed substrate addition affects fungal morphology, broth rheology, and recombinant enzyme productivity. To accomplish this, a series of duplicate fed-batch fermentations were performed in 20-L fermentors with a recombinant glucoamylase producing strain of Aspergillus oryzae. The total cycle time for substrate pulsing was varied over a wide range (30-2,700 s), with substrate added only during the first 30% of each cycle. As a control, a fermentation was conducted with continuous substrate feeding, and in all fermentations the same total amount of substrate was added. Results show that the total biomass concentration remained relatively unaltered, while a substantial decrease in the mean projected area of fungal elements (i.e., average size) was observed with increasing cycle time. This led to reduced broth viscosity and increased oxygen uptake rate. However, high values of cycle time (i.e., 900-2,700 s) showed a significant increase in fungal conidia formation and significantly reduced recombinant enzyme productivity, suggesting that the fungi channeled substrate to storage compounds rather than to recombinant protein. In addition to explaining the effect of cycle time on fermentation performance, these results may aid in explaining the discrepancies observed on scale-up to larger fermentors.

Bioprocessing strategies to improve heterologous protein production in filamentous fungal fermentations

Filamentous fungi have long been used for the production of metabolites and enzymes. With developments in genetic engineering and molecular biology, filamentous fungi have also achieved increased attention as hosts for recombinant DNA. However, the production levels of non-fungal proteins are usually low. Despite the achievements obtained using molecular tools, the heterologous protein loss caused by extracellular fungal protease degradation persists. This review provides an overview of the potential bioprocessing strategies that can be applied to inhibit protease activity thereby enhancing heterologous protein production.

Agitation effects on submerged growth and product formation of Aspergillus niger

Product formation of mycelial organisms, like Aspergillus niger, is intimately connected with their morphology. Pellet morphology is often requested for product formation. Therefore, it is important to reveal the influence of the hydrodynamic conditions on the morphological development. In the present study, pellet morphology and glucoamylase formation were studied under different agitation intensities of A. niger AB1.13. For pellet formation inside the bioreactor, without the use of precultures, it is necessary to work at low energy dissipation rates. Biomass growth and glucoamylase activity were correlated with energy dissipation. Furthermore, product yield was analysed in dependence of pellet size and concentration. The present work shows that simple equations based on Monod-kinetics can describe growth and product formation, in general, also in mycelian organisms. All measured morphological data, like pellet concentration, as well as glucoamylase formation, strongly depend on the hydrodynamic conditions.