Study of dye decolorization in an immobilized laccase enzyme-reactor using online spectroscopy

Efficient degradation and detoxification of structurally different dyes and mixed dyes by LAC-4 laccase purified from white-rot fungi Ganoderma lucidum

The purpose of this study is to evaluate the decolorization ability and detoxification effect of LAC-4 laccase on various types of single and mixed dyes, and lay a good foundation for better application of laccase in the efficient treatment of dye pollutants. The reaction system of the LAC-4 decolorizing single dyes (azo, anthraquinone, triphenylmethane, and indigo dyes, 17 dyes in total) were established. To explore the decolorization effect of the dye mixture by LAC-4, two dyes of the same type or different types were mixed at the same concentration (100 mg/L) in the reaction system containing 0.5 U laccase, and time-course decolorization were performed on the dye mixture. The combined dye mixtures consisted of azo + azo, azo + anthraquinone, azo + indigo, azo + triphenylmethane, indigo + triphenylmethane, and triphenylmethane + triphenylmethane. The results obtained in this study were as follows. Under optimal conditions of 30 °C and pH 5.0, LAC-4 (0.5 U) can efficiently decolorize four different types of dyes. The 24-hour decolorization efficiencies of LAC-4 for 800 mg/L Orange G and Acid Orange 7 (azo), Remazol Brilliant Blue R (anthraquinone), Bromophenol Blue and Methyl Green (triphenylmethane), and Indigo Carmine (indigo) were 75.94%, 93.30%, 96.56%, 99.94%, 96.37%, and 37.23%, respectively. LAC-4 could also efficiently decolorize mixed dyes with different structures. LAC-4 can achieve a decolorization efficiency of over 80% for various dye mixtures such as Orange G + Indigo Carmine (100 mg/L+100 mg/L), Reactive Orange 16 + Methyl Green (100 mg/L+100 mg/L), and Remazol Brilliant Blue R + Methyl Green (100 mg/L+100 mg/L). During the decolorization process of the mixed dyes by laccase, four different interaction relationships were observed between the dyes. Decolorization efficiencies and rates of the dyes that were difficult to be degraded by laccase could be greatly improved when mixed with other dyes. Degradable dyes could greatly enhance the ability of LAC-4 to decolorize extremely difficult-to-degrade dyes. It was also found that the decolorization efficiencies of the two dyes significantly increased after mixing. The possible mechanisms underlying the different interaction relationships were further discussed. Free, but not immobilized, LAC-4 showed a strong continuous batch decolorization ability for single dyes, two-dye mixtures, and four-dye mixtures with different structures. LAC-4 exhibited high stability, sustainable degradability, and good reusability in the continuous batch decolorization. The LAC-4-catalyzed decolorization markedly reduced or fully abolished the toxic effects of single dyes (azo, anthraquinone, and indigo dye) and mix dyes (nine dye mixtures containing four structural types of dyes) on plants. Our findings indicated that LAC-4 laccase had significant potential for use in bioremediation due to its efficient degradation and detoxification of single and mixed dyes with different structural types.

Green biocatalyst for decolorization of azo dyes from industrial wastewater: Coriolopsis trogii 2SMKN laccase immobilized on recycled brewer's spent grain

This study presents an innovative approach for the reuse and recycling of waste material, brewer's spent grain (BSG) for creating a novel green biocatalyst. The same BSG was utilized in several consecutive steps: initially, it served as a substrate for the cultivation and production of laccase by a novel isolated fungal strain, Coriolopsis trogii 2SMKN, then, it was reused as a carrier for laccase immobilization, aiding in the process of azo dye decolorization and finally, reused as recycled BSG for the second successful laccase immobilization for six guaiacol oxidation, contributing to a zero-waste strategy. The novel fungal strain produced laccase with a maximum activity of 171.4 U/g after 6 days of solid-state fermentation using BSG as a substrate. The obtained laccase exhibited excellent performance in the decolorization of azo dyes, both as a free and immobilized, at high temperatures, without addition of harmful mediators, achieving maximum decolorization efficiencies of 99.0%, 71.2%, and 61.0% for Orange G (OG), Congo Red, and Eriochrome Black T (EBT), respectively. The immobilized laccase on BSG was successfully reused across five cycles of azo dye decolorization process. Notably, new green biocatalyst outperformed commercial laccase from Aspergillus spp. in the decolorization of OG and EBT. GC-MS and LC-MS revealed azo-dye degradation products and decomposition pathway. This analysis was complemented by antimicrobial and phytotoxicity tests, which confirmed the non-toxic nature of the degradation products, indicating the potential for safe environmental disposal.

Effective Decolorization and Detoxification of Single and Mixed Dyes with Crude Laccase Preparation from a White-Rot Fungus Strain Pleurotus eryngii

To fully harness the potential of laccase in the efficient decolorization and detoxification of single and mixed dyes with diverse chemical structures, we carried out a systematic study on the decolorization and detoxification of single and mixed dyes using a crude laccase preparation obtained from a white-rot fungus strain, Pleurotus eryngii. The crude laccase preparation showed efficient decolorization of azo, anthraquinone, triphenylmethane, and indigo dyes, and the reaction rate constants followed the order Remazol Brilliant Blue R > Bromophenol blue > Indigo carmine > New Coccine > Reactive Blue 4 > Reactive Black 5 > Acid Orange 7 > Methyl green. This laccase preparation exhibited notable tolerance to SO42- salts such as MnSO4, MgSO4, ZnSO4, Na2SO4, K2SO4, and CdSO4 during the decolorization of various types of dyes, but was significantly inhibited by Cl- salts. Additionally, this laccase preparation demonstrated strong tolerance to some organic solvents such as glycerol, ethylene glycol, propanediol, and butanediol. The crude laccase preparation demonstrated the efficient decolorization of dye mixtures, including azo + azo, azo + anthraquinone, azo + triphenylmethane, anthraquinone + indigo, anthraquinone + triphenylmethane, and indigo + triphenylmethane dyes. The decolorization kinetics of mixed dyes provided preliminary insight into the interactions between dyes in the decolorization process of mixed dyes, and the underlying reasons and mechanisms were discussed. Importantly, the crude laccase from Pleurotus eryngii showed efficient repeated-batch decolorization of single-, two-, and four-dye mixtures. This crude laccase demonstrated high stability and reusability in repeated-batch decolorization. Furthermore, this crude laccase was efficient in the detoxification of different types of single dyes and mixed dyes containing different types of dyes, and the phytotoxicity of decolorized dyes (single and mixed dyes) was significantly reduced. The crude laccase efficiently eliminated phytotoxicity associated with single and mixed dyes. Consequently, the crude laccase from Pleurotus eryngii offers significant potential for practical applications in the efficient decolorization and management of single and mixed dye pollutants with different chemical structures.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Immobilization of enzymes for bioremediation: A future remedial and mitigating strategy

Over the years, extensive urbanization and industrialization have led to xenobiotics contamination of the environment and also posed a severe threat to human health. Although there are multiple physical and chemical techniques for xenobiotic pollutants management, bioremediation seems to be a promising technology from the environmental perspective. It is an eco-friendly and low-cost method involving the application of microbes, plants, or their enzymes to degrade xenobiotics into less toxic or non-toxic forms. Moreover, bioremediation involving enzymes has gained an advantage over microorganisms or phytoremediation due to better activity for pollutant degradation with less waste generation. However, the significant disadvantages associated with the application of enzymes are low stability (storage, pH, and temperature) as well as the low possibility of reuse as it is hard to separate from reaction media. The immobilization of enzymes without affecting their activity provides a possible solution to the problems and allows reusability by easing the process of separation with improved stability to various environmental factors. The present communication provides an overview of the importance of enzyme immobilization in bioremediation, carrier selection, and immobilization methods, as well as the pros and cons of immobilization and its prospects.

Synergistic action of laccase treatment and membrane filtration during removal of azo dyes in an enzymatic membrane reactor upgraded with electrospun fibers

Nowadays, the increasing amounts of dyes present in wastewaters and even water bodies is an emerging global problem. In this work we decided to fabricate new biosystems made of nanofiltration or ultrafiltration membranes combined with laccase entrapped between polystyrene electrospun fibers and apply them for decolorization of aqueous solutions of three azo dyes, C.I. Acid Yellow 23 (AY23), C.I. Direct Blue 71 (DB71) and C.I. Reactive Black 5 (RB5). Besides effective decolorization of the permeate stream, the biosystems also allowed removal of dyes from the retentate stream as a result of enzymatic action. The effect of pH and applied pressure on decolorization efficiencies was investigated, and pH 5 and pressure of 2 bar gave the highest removal efficiencies of 97% for AY23 and 100% for both DB71 and RB5 from permeate solutions while decolorization of retentate for RB5 reached 65% under these conditions. Almost 100% decolorization of all dyes was achieved after three consecutive enzyme membrane cycles. Decolorization was shown to be due to the synergistic action of membrane separation and bioconversion. The biocatalytic action also enabled significant reduction of permeate and retentate toxicity, which is one of the biggest environmental health issues for these types of streams.

Laccase producing bacteria influenced the high decolorization of textile azo dyes with advanced study

Recent year, bacterial laccases are increasing interest in the field of industry and environmental applications especially decolorization of azo dyes. In industry, the dyes are present in stable nature including chemicals and lights. Due to these defects, the novel approaches are needed to removal of dyes before discharging into the environment. Among the various technologies, biological treatment methods and their strategies are very important, because of the decolorization and detoxification. Consecutively, biological mediated dyes removal are emerged with high potential especially microbes. Microbial laccases creates up new opportunities for their commercial applications. In this study, laccases were produced from Bacillus cereus (B. Cereus) and Pseudomonas parafulva (P. parafulva) by sub merged fermentation. For immobilization, the produced laccases were subjected to purify using 80% saturated ammonium sulphate and followed by dialysis. Then, crude laccases were immobilized through copper-alginate entrapment method. The maximum immobilized enzyme activity of the immobilized laccases were shown pH 8 at 50 °C and pH 7 at 40 °C for B. Cereus and P. parafulva respectively. In contrast, the normal enzyme activity was pH 10 at 40 °C and pH 8 at 40 °C were indicated for Bacillus cereus and P. parafulva respectively. Next, the free and immobilized laccases were performed the decolorization of three azo dyes T-blue, yellow GR and orange 3R, and exhibited that the 91.69 and 89.21% of Orange 3R were completely decolorized by both the B. Cereus and P. parafulva laccases when compared with free laccases enzymes. The confirmation of decolorization was monitored by UV-vis spectroscopy and FTIR spectroscopy, which clearly confirm the changes of peaks when compared with normal laccases. Finally, we have concluded that the B. Cereus and P. parafulva laccases are very important in azo dye decolorization and these used in future biological treatment of dyeing effluents.

Laccase bound to cryogel functionalized with phenylalanine for the decolorization of textile dyes

In this study, amino acid functionalized poly(2-hydroxyethyl methacrylate-N-methacrylolyl-l-phenylalanine) [PHEMAPA] cryogel discs were prepared. In this respect, phenylalanine containing N-methacryloyl-(L)-phenylalanine methyl ester (MAPA) was polymerized with 2-hydroxyethyl methacrylate (HEMA) without requirement of any activation step. Laccase bound poly(2-hydroxyethyl methacrylate-N-methacryloyl-l-phenylalanine) [Lac-PHEMAPA] cryogel discs were applied for decolorization of Reactive Blue-247 (RB-247). The ability of Lac-PHEMAPA cryogel discs on dye decolorization was found to be as 90% in 2 h and even more within 4h. The decolorization activities of 86% and 73% were observed at relatively low (4°C) and high (60°C) temperatures, respectively. The effect of dye concentration on dye decolorization and 100% decolorization activity was achieved in dye concentration between 50-300 ppm. Lac-PHEMAPA cryogel discs maintained 80% of its decolorization activity after six cycles. Consequently, the PHEMAPA cryogel discs are promising materials for immobilizing laccase. The Lac-PHEMAPA has a rapid dye decolorization in a broad range of temperature. The preparation is furthermore very stable and activity is preserved during storage.

Enhancement of laccase immobilization onto wet chitosan microspheres using an iterative protocol and its potential to remove micropollutants

This study was focused on creating a new and effective immobilization method for Trametes versicolor laccase (Lc) by using chitosan (CS) microspheres activated with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride. The activation of the support alternated with immobilization of the enzyme, in repetitive procedures, led to obtaining three different products. Also, the physicochemical properties of the new products were investigated and compared with those of free laccase. The discoloration and reusability properties of the immobilized Lc were evaluated using indigo carmine (IC) as a model micropollutant. The ESEM and FT-IR methods demonstrated that the Lc was successfully immobilized. The relative reaction rate and the total amount of immobilized Lc were tripled using the iterative protocol as proved by specific and Bradford assays. The maximum amount of immobilized Lc was 8.4 mg Lc/g CS corresponding to the third immobilization procedure. Compared to the free Lc, the operational stability of the immobilized Lc was significantly improved, presenting a maximum activity plateau over a pH range of 3-5 and a temperature range of 25-50 °C. The thermal inactivation study at 55 °C proved that the immobilized enzyme is three times more stable than the free Lc. The isoconversional and Michaelis-Menten methods showed that the immobilization did not affect the enzyme catalytic properties. After 32 days of storage, the residual activities are 85% for the immobilized laccase and 40% for the free one. In similar conditions, the free and immobilized Lc (2.12 x 10^-6 M) completely decolorized IC (7.15 x 10^-5 M) within 14 min. The immobilized Lc activity remained almost constant (80%) during 10 reusability cycles. All these results highlight the substantial advantages of the new immobilization protocol and demonstrate that immobilized Lc can be used as a promising micropollutant removal from real wastewater.

Myco-decontamination of azo dyes: nano-augmentation technologies

Effluents of textile, paper, and related industries contain significant amounts of synthetic dyes which has serious environmental and health implications. Remediation of dyes through physical and chemical techniques has specific limitations. Augmented biological decontamination strategies 'microbial remediation' may involve ring-opening of dye molecules besides the reduction of constituent metal ions. Both bacterial and fungal genera are known to exhibit metabolic versatility which can be harnessed for effective bio-removal of the toxic dye contaminants. Ascomycetous/basidiomycetes fungi can effectively decontaminate azo dyes through laccase/peroxidase enzyme-mediated catalysis. The extent, efficacy, and range of fungal dye decontamination can be enhanced by the conjugated application of nanomaterials, including nanoparticles (NPs) and their composites. Fungal cell-enabled NP synthesis- 'myco-farmed NPs', is a low-cost strategy for scaled-up fabrication of a variety of metal, metal oxide, non-metal oxide NPs through oxidation/reduction of dissolved ions/molecules by extracellular biomolecules. Augmented and rapid decontamination of azo dyes at high concentrations can be achieved by the use of myco-farmed NPs, NPs adsorbed fungal biomass, and nano-immobilized fungi-derived bio-catalytical agents. This manuscript will explore the opportunities and benefits of mycoremediation and application of fungus-NP bionanoconjugate to remediate dye pollutants in wastewaters and land contaminated with the effluent of textile industries.

Hazardous contaminants in the environment and their laccase-assisted degradation - A review

In recent years, owing to the serious ecological risks and human health-related adverse effects, the wide occurrence of hazardous contaminants along with their potential to enter the environment have gained great public concerns. In this context, significant actions are urgently required to tackle the ignorance and inefficient monitoring/removal of emerging/(re)-emerging contaminants (ECs) in the environment from different routes of concerns, i.e., industrial waste, pharmaceutical, personal care products (PCPs), toxic effluents, etc. Laccases are multinuclear copper-containing oxidoreductases and can carry out one electron oxidation of a broad spectrum of environmentally related contaminants. In biotechnology, this group of versatile enzymes is known as a green catalyst/green tool with enormous potentialities to tackle ECs of high concern. In this review, we endeavored to present up-to-date literature concerning the potential use of immobilized laccases for the degradation and remediation of various types of environmental pollutants present in the environment. Both, pristine and immobilized, laccases have shown great capacity to oxidative degradation and mineralization of endocrine disrupting chemicals (EDs) in batch treatment processes as well as in large-scale continuous reactors. These properties make laccase as particularly attractive biocatalysts in environmental remediation processes, and their use might be advantageous over the conventional treatments. This review summarizes the most significant recent advances in the use of laccases and their future perspectives in environmental biotechnology.

Removal of indigo carmine dye by electrocoagulation using magnesium anodes with polarity change

The aim of this study was to evaluate the performance of high purity magnesium and the magnesium-aluminum-zinc alloy AZ31 as sacrificial anodes in an electrocoagulation process with polarity change for the treatment of synthetic indigo carmine solution. It was studied the effect of the main parameters such as temperature, anodic material, current density, initial dye concentration, and agitation speed on the diminishing of indigo carmine concentration and non-purgeable organic carbon. Also, image analysis was used in conjunction with zeta potential measurements to understand the mechanism of flocs formation. The best results were 80% and 96% removal for non-purgeable organic carbon and dye content respectively at room temperature, by using turbulent regime, initial dye concentration of 100 mg L^-1 and 50 A m^-2 as current density with AZ31 alloy as electrodes. Particularly, high purity magnesium reached 75% in non-purgeable organic carbon removal and 86% in dye removal at the conditions described above. Finally, an additional improvement of 43% in the diminishing of the organic carbon content was observed when polarity change was used, a phenomenon that was attributed to the distribution of the oxidation reaction between electrodes, avoiding the saturation of the surface with oxide and hydroxide layers. Major areas and major fractal dimension were obtained by using a polarity change.

Bifunctional in vivo role of laccase exploited in multiple biotechnological applications

Laccases are multicopper enzymes present in plants, fungi, bacteria, and insects, which catalyze oxidation reactions together with four electron reduction of oxygen to water. Plant, bacterial, and insect laccases have a polymerizing role in nature, implicated in biosynthesis of lignin, melanin formation, and cuticle hardening, respectively. On the other hand, fungal laccases carry out both polymerizing (melanin synthesis and fruit body formation) as well as depolymerizing roles (lignin degradation). This bifunctionality of fungal laccases can be attributed to the presence of multiple isoforms within the same as well as different genus and species. Interestingly, by manipulating culture conditions, these isoforms with their different induction patterns and unique biochemical characteristics can be expressed or over-expressed for a targeted biotechnological application. Consequently, laccases can be considered as one of the most important biocatalyst which can be exploited for divergent industrial applications viz. paper pulp bleaching, fiber modification, dye decolorization, bioremediation as well as organic synthesis. The present review spotlights the role of fungal laccases in various antagonistic applications, i.e., polymerizing and depolymerizing, and co-relating this dual role with potential industrial significance.

Immobilized ligninolytic enzymes: An innovative and environmental responsive technology to tackle dye-based industrial pollutants - A review

In the twenty-first century, chemical and associated industries quest a transition prototype from traditional chemical-based concepts to a greener, sustainable and environmentally-friendlier catalytic alternative, both at the laboratory and industrial scale. In this context, bio-based catalysis offers numerous benefits along with potential biotechnological and environmental applications. The bio-based catalytic processes are energy efficient than conventional methodologies under moderate processing, generating no and negligible secondary waste pollution. Thanks to key scientific advances, now, solid-phase biocatalysts can be economically tailored on a large scale. Nevertheless, it is mandatory to recover and reprocess the enzyme for their commercial feasibility, and immobilization engineering can efficiently accomplish this challenge. The first part of the present review work briefly outlines the immobilization of lignin-modifying enzymes (LMEs) including lignin peroxidase (LiP), manganese peroxidase (MnP) and laccase of white-rot fungi (WRF). Whereas, in the second part, a particular emphasis has been given on the recent achievements of carrier-immobilized LMEs for the degradation, decolorization, or detoxification of industrial dyes and dye-based industrial wastewater effluents.

Hollow cross-linked enzyme aggregates (h-CLEA) of laccase with high uniformity and activity

Hollow cross-linked enzyme aggregates of laccase (h-CLEA laccase) can be prepared by employing a millifluidic reactor carrying two coaxial laminar flows. In a confluence zone where acetonitrile and an aqueous solution of laccase meet, diffusion of acetonitrile into the aqueous solution gives rise to rapid precipitation of laccase aggregates at the water/acetonitrile interface, as is evidenced by fluorescence images. By controlling the flow rates carefully in the laminar flow regions, h-CLEA laccase around 220±10nm can be obtained, and the size of the h-CLEA laccase increases with increasing flow rates of both solutions. The h-CLEA laccase particles are distinctly different from CLEA laccase prepared in batch processes. The former only consist a crust of cross-linked enzymes (with a hollow core) whereas the latter has a highly porous structure. When the h-CLEA laccase is used as biocatalysts, their activity (0.26U/mg) is comparable to that of free enzymes at neutral pH due to the hollow structure. Moreover, the activity of h-CLEA laccase is higher than that of free laccase at high pH. For example, trypan blue (a dye molecule) can be decolorized completely in the presence of h-CLEA laccase within 270min even at pH 10.0, at which the free enzyme completely loses its activity. Because of their uniform sizes, h-CLEA laccase can be trapped in a membrane for continuous degradation of trypan blue up to 96h without losing any activity. This study shows the superiority of h-CLEA laccase compared to other types of immobilized enzymes.

Degradation of dyes using crude extract and a thermostable and pH-stable laccase isolated from Pleurotus nebrodensis

Three laccase isoenzymes (Lac1, Lac2 and Lac3) have been purified to homogeneity from Pleurotus nebrodensis in our previous study. Lac2 was shown to be the dominant isoform, capable of oxidizing the majority of laccase substrates and manifesting good thermostability and pH stability. Hence, Lac2 was selected to decolourize structurally different dyes and the colour removal efficiencies of Lac2 and the crude extract of P. nebrodensis were compared. By monitoring the λ_max of the reaction system during the course of biotransformation, clear hypsochromic shifts were observed for most of the dyes examined, illustrating that at least one peak disappeared as a result of laccase treatment. In general, Lac2 was more efficient within a short time (1 h) and the crude extract, in general, could achieve similar or even higher efficiency when the duration of treatment was extended to 24 h. Malachite green (MG) was chosen to study the detoxifying potential of Lac2, because of the relatively simple structure and high toxicity of the dye towards microorganisms. The toxicity of MG towards both bacteria (Bacillus subtilis, Bacillus licheniformis, Pseudomonas fluorescens and Escherichia coli) and fungi (Fusarium graminearum and Trichoderma harzianum) was dramatically decreased and the potential mechanism was estimated by GC–MS as to remove four methyl groups firstly and the two newly formed amine groups would be degraded or polymerized further. The present study facilitates an understanding of the application of P. nebrodensis laccases and furnishes evidence for the safety of their utilization in the treatment of wastewater emanating from textile industries.

Degradation of organic dyes by Si/SiOx core-shell nanowires: Spontaneous generation of superoxides without light irradiation

Recently, silicon nanowires (SiNWs) have been proven to be highly active in the photocatalysis of dye degradation. However, the unstable hydrogen-terminated surface and the need for constant light irradiation hinder their extensive use. In this work, a stable silica shell was intentionally formed on the surface of SiNWs to produce Si/SiOx core-shell silicon nanowires (S-SiNWs). Light-illuminated or not, S-SiNWs showed almost identical degradation ability for the degradation of indigo carmine (IC) in both conditions, which meant neither hydrogen termination nor light irradiation was a prerequisite for the degradation activity of S-SiNWs. UV/Vis spectroscopy and liquid chromatography/mass spectrometry showed that IC was converted into isatin sulfonic acid in this process. Quenching studies and electron paramagnetic resonance spectroscopy revealed that this bleaching ability was highly dependent on superoxides. A possible mechanism was accordingly suggested. In addition, the recently discovered reductase-like activity of SiNWs can be explained by the superoxides generation.

Laccase production by Pleurotus ostreatus and its application in synthesis of gold nanoparticles

In this work, the production of fungal laccase was optimized from local isolate of Pleurotus ostreatus using solid state fermentation. Factorial design was used to study the effect of several nutrients on enzyme production. Purification and characterization of the enzyme and the effect of temperature, pH and gamma radiation on fungal growth and enzyme production was investigated.

Optimization of production conditions yielded an enzyme with activity over 32,450 IU/g of fermented substrate. Factorial design was capable of establishing the conditions that multiplied the activity of the enzyme several folds, consequently, reducing the cost of production. The enzyme was capable of decolorizing several dyes with over 80% reduction in color confirming the aromatic degrading capability of laccase. The enzyme was also used in the synthesis of gold nanoparticles, proving that laccase from Pleurotus ostreatus has a strong potential in several industrial applications.

Laccases to take on the challenge of emerging organic contaminants in wastewater

The removal of emerging organic contaminants from municipal wastewater poses a major challenge unsatisfactorily addressed by present wastewater treatment processes. Enzyme-catalyzed transformation of emerging organic contaminants (EOC) has been proposed as a possible solution to this major environmental issue more than a decade ago. Especially, laccases gained interest in this context in recent years due to their broad substrate range and since they only need molecular oxygen as a cosubstrate. In order to ensure the stability of the enzymes and allow their retention and reuse, either immobilization or insolubilization of the biocatalysts seems to be the prerequisite for continuous wastewater treatment applications. The present review summarizes the research conducted on EOC transformation with laccases and presents an overview of the possible immobilization techniques. The goal is to assess the state of the art and identify the next necessary steps that have to be undertaken in order to implement laccases as a tertiary wastewater treatment process in sewage treatment plants.

Role of laccase as an enzymatic pretreatment method to improve lignocellulosic saccharification

The saccharification of wheat straw was improved when an incubation step was performed withTrametes versicolorlaccase (TvL) and the mediator 1-hydroxybenzotriazole (1-HBT) prior to an alkaline peroxide extraction (APE).

Probing horseradish peroxidase catalyzed degradation of azo dye from tannery wastewater

Biocatalysis based effluent treatment has outclassed the presently favored physico-chemical treatments due to nil sludge production and monetary savings. Azo dyes are commonly employed in the leather industry and pose a great threat to the environment. Here, we show the degradation of C. I. Acid blue 113 using horseradish peroxidase (HRP) assisted with H₂O₂ as a co-substrate. It was observed that 0.08 U HRP can degrade 3 mL of 30 mg/L dye up to 80% within 45 min with the assistance of 14 μL of H₂O₂ at pH 6.6 and 30°C. The feasibility of using the immobilized HRP for dye degradation was also examined and the results show up to 76% dye degradation under similar conditions to that of free HRP with the exception of longer contact time of 240 min. Recycling studies reveal that the immobilized HRP can be recycled up to 3 times for dye degradation. Kinetics drawn for the free HRP catalyzed reaction marked a lower K_m and higher V_max values, which denotes a proper and faster affinity of the enzyme towards the dye, when compared to the immobilized HRP. The applicability of HRP for treating the actual tannery dye-house wastewater was also demonstrated.

Analysis of myeloperoxidase activity in wound fluids as a marker of infection

Background

Neutrophilic polymorphonuclear leukocytes play a crucial role in the host defence against bacterial and fungal infections. They participate in the inflammatory response through the liberation of peptides and enzymes like myeloperoxidase (MPO). Therefore, MPO has a potential as a marker enzyme for the diagnosis of wound infection.

Methods

Substrate specificities and reaction pathways of MPO were investigated for new MPO substrates: crystal violet, leuco crystal violet, fast blue RR (4-benzoylamino-2,5-dimethoxybenzenediazonium chloride hemi(zinc chloride) salt) and various systematically substituted model substrates based on 2,7-dihydroxy-1-(4-hydroxyphenylazo)naphtalene-3,6-disulphonic acid. In addition, fast blue RR was covalently bound to siloxanes allowing immobilization of the substrate, while cellobiosedehydrogenase was integrated for generation of hydrogen peroxide required by MPO.

Results

Elevated concentrations of MPO were found in infected wounds compared with non-infected wounds (92.2 ± 45.0 versus 1.9 ± 1.8 U/mL). Various soluble and immobilized substrates were oxidized by MPO in wound samples and the influence of substrate structure and reaction pathways were elucidated for selected compounds.

Conclusions

Incubation of different MPO substrates with infected wound fluid samples resulted in a clear colour change in the case of elevated MPO concentrations, thus allowing early diagnosis of wound infection.

Thermostability, pH stability and dye degrading activity of a bacterial laccase are enhanced in the presence of Cu2O nanoparticles

The present study relates to a nanotechnology enabled method in which purified laccase from Escherichia coli AKL2 was supplemented with 100 μM copper oxide nanoparticles (Cu(2)O) (NP-laccase). The activity, half life and stability of NP-laccase were enhanced by 4, 42 and 36-fold respectively at high temperature (80 °C) and also over a wide range of pH (4-12) than laccase (in the presence of 0.18 mM CuSO(4)). Thermodynamic analysis of the nanoparticle-induced enzyme stability revealed an enhanced entropy-enthalpy compensation at 80 °C, which reflected the maintenance of its native structure. This was further supported by CD studies. The enhanced activity and thermostability of NP-laccase can be utilized for efficient decolorisation of dyes (both phenolic and azo).

Physical features of ultrasound assisted enzymatic degradation of recalcitrant organic pollutants

This work has attempted to provide answer to the interaction of sonolysis and enzymatic treatment on degradation of recalcitrant dyes in a combined treatment. The model system comprises of two dyes, acid red and malachite green as model pollutants, along with horseradish peroxidase as a model enzyme and ultrasound of 20 kHz frequency. A dual approach of coupling experimental results with simulations of cavitation bubble dynamics has been adopted. Utilization of oxidation potential of horseradish peroxidase has been found to be a function of convection level in the medium. Cavitation phenomenon is found to have an adverse effect on enzyme action due to generation of high amplitude shock waves, which denature the enzyme. Degradation of dye at high static pressure increases due to absence of cavitation and high energy interaction (or collisions) between enzyme and dye molecules, which are beneficial towards enzymatic oxidation of the latter. High intensity convection generated by ultrasound also obviates need for an external shielding agent such as PEG that prevents attachment of the phenoxy radicals to enzyme that blocks the active sites of the enzyme.

Bioremediation approaches for organic pollutants: a critical perspective

Due to human activities to a greater extent and natural processes to some extent, a large number of organic chemical substances such as petroleum hydrocarbons, halogenated and nitroaromatic compounds, phthalate esters, solvents and pesticides pollute the soil and aquatic environments. Remediation of these polluted sites following the conventional engineering approaches based on physicochemical methods is both technically and economically challenging. Bioremediation that involves the capabilities of microorganisms in the removal of pollutants is the most promising, relatively efficient and cost-effective technology. However, the current bioremediation approaches suffer from a number of limitations which include the poor capabilities of microbial communities in the field, lesser bioavailability of contaminants on spatial and temporal scales, and absence of bench-mark values for efficacy testing of bioremediation for their widespread application in the field. The restoration of all natural functions of some polluted soils remains impractical and, hence, the application of the principle of function-directed remediation may be sufficient to minimize the risks of persistence and spreading of pollutants. This review selectively examines and provides a critical view on the knowledge gaps and limitations in field application strategies, approaches such as composting, electrobioremediation and microbe-assisted phytoremediation, and the use of probes and assays for monitoring and testing the efficacy of bioremediation of polluted sites.

Transformation pathway of Remazol Brilliant Blue R by immobilised laccase

This study deals with the biotransformation products obtained from the transformation of the anthraquinonic dye Remazol Brilliant Blue R (RBBR) by immobilised laccase from the white-rot fungus Trametes pubescens. A decolouration percentage of 44% was obtained in 42h. RBBR transformation products were investigated using ultraviolet-visible (UV-vis) spectrum scan and High Performance Liquid Chromatography/Mass Spectrometry (LC-MS) analysis. Two compounds were identified as the transformation intermediates (m/z 304.29 and m/z 342.24) and other two as the final transformation products (m/z 343.29 and m/z 207.16). As a result a metabolic pathway for RBBR transformation by laccase was proposed. No backward polymerisation of the transformation products resulting in recurrent colouration was observed after laccase treatment of RBBR. It was also found that the biotransformation products of RBBR showed less phytotoxicity than the dye itself.

Covalent immobilisation of protease and laccase substrates onto siloxanes

Immobilisation of enzyme substrates is a powerful tool in the detection of enzymes in the chemosphere and the environment. A siloxane based strategy for the covalent immobilisation of oxidoreductase and protease substrates was developed involving activation of silica gel and polyethylene terephthalate (PET) as model carriers with (3-aminopropyl)-triethoxysilane or (3-mercaptopropyl)-trimethoxysilane (APTS, MPTS). Ferulic acid and L-Leucine-p-nitroanilide, Gly-Phe p-nitroanilide (GPpNA) and N-Succinyl-Ala-Ala-Pro-Leu p-nitroanilide (SAAPLpNA) as laccase and protein substrates, respectively, were covalently attached using glutaraldehyde or carbodiimide based cross-linking strategies. In contrast to conversion in solution, immobilised SAAPLpNA was hydrolysed much faster by protease than immobilised GPpNA indicating steric hindrance with decreasing chain length between point of attachment and site of enzyme attack. Immobilised ferulic acid was oxidised by laccase both in case of MPTS and APTS-modified silica gel giving clearly visible colour changes with Delta E values of 7.2 and 2.3, respectively after 24h of incubation, where Delta E describes the distance between two colours. Similarly, clearly visible colour changes with a Delta E value of 8.6 were seen after laccase treatment of ferulic acid immobilised on APTS activated PET as carrier. Limited surface hydrolysis of PET with a cutinase enhanced coupling of APTS and ferulic acid due to a larger number of hydroxyl groups available on the surface and consequently led to a higher colour difference of Delta E=12.2 after laccase oxidation. The covalent coupling product between ferulic acid and 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane was identified by LC-MS (M+1m/z601) and successfully oxidised with laccase.