Engineering hepatocellular morphogenesis and function via ligand-presenting hydrogels with graded mechanical compliance

Analysis of culture and RNA isolation methods for precision-cut liver slices from cirrhotic rats

Precision-cut liver slices (PCLS) are increasingly used as a model to investigate anti-fibrotic therapies. However, many studies use PCLS from healthy animals treated with pro-fibrotic stimuli in culture, which reflects only the early stages of fibrosis. The effects of different culture conditions on PCLS from cirrhotic animals has not been well characterized and there is no consensus on optimal methods. In this study, we report a method for the collection and culture of cirrhotic PCLS and compare the effect of common culture conditions on viability, function, and gene expression. Additionally, we compared three methods of RNA isolation and identified a protocol with high yield and purity. We observed significantly increased albumin production when cultured with insulin-transferrin-selenium and dexamethasone, and when incubated on a rocking platform. Culturing with insulin-transferrin-selenium and dexamethasone maintained gene expression closer to the levels in fresh slices. However, despite stable viability and function up to 4 days, we found significant changes in expression of key genes by day 2. Interestingly, we also observed that cirrhotic PCLS maintain viability in culture longer than slices from healthy animals. Due to the influence of matrix stiffness on fibrosis and hepatocellular function, it is important to evaluate prospective anti-fibrotic therapies in a platform that preserves tissue biomechanics. PCLS from cirrhotic animals represent a promising tool for the development of treatments for chronic liver disease.

Large Polyacrylamide Hydrogels for Large-Batch Cell Culture and Mechanobiological Studies

The rigidity of a cell's substrate or extracellular matrix plays a vital role in regulating cell and tissue functions. Polyacrylamide (PAAm) hydrogels are one of the most widely used cell culture substrates that provide a physiologically relevant range of stiffness. However, it is still arduous and time-consuming to prepare PAAm substrates in large batches for high-yield or multiscale cell cultures. In this communication, a simple method to prepare PAAm hydrogels with less time cost and easily accessible materials is presented. The hydrogel is mechanically uniform and supports cell culture in a large batch. It is further shown that the stiffness of the hydrogel covers a large range of Young's modulus and is sensed by cells, regulating various cell features including changes in cell morphology, proliferation, and contractility. This method improves the reproducibility of mechanobiology studies and can be easily applied for mechanobiology research requiring large numbers of cells or experimental groups.

Cellular mechanotransduction in health and diseases: from molecular mechanism to therapeutic targets

Cellular mechanotransduction, a critical regulator of numerous biological processes, is the conversion from mechanical signals to biochemical signals regarding cell activities and metabolism. Typical mechanical cues in organisms include hydrostatic pressure, fluid shear stress, tensile force, extracellular matrix stiffness or tissue elasticity, and extracellular fluid viscosity. Mechanotransduction has been expected to trigger multiple biological processes, such as embryonic development, tissue repair and regeneration. However, prolonged excessive mechanical stimulation can result in pathological processes, such as multi-organ fibrosis, tumorigenesis, and cancer immunotherapy resistance. Although the associations between mechanical cues and normal tissue homeostasis or diseases have been identified, the regulatory mechanisms among different mechanical cues are not yet comprehensively illustrated, and no effective therapies are currently available targeting mechanical cue-related signaling. This review systematically summarizes the characteristics and regulatory mechanisms of typical mechanical cues in normal conditions and diseases with the updated evidence. The key effectors responding to mechanical stimulations are listed, such as Piezo channels, integrins, Yes-associated protein (YAP) /transcriptional coactivator with PDZ-binding motif (TAZ), and transient receptor potential vanilloid 4 (TRPV4). We also reviewed the key signaling pathways, therapeutic targets and cutting-edge clinical applications of diseases related to mechanical cues.

RGD density along with substrate stiffness regulate hPSC hepatocyte functionality through YAP signalling

Human pluripotent stem cell-derived hepatocytes (hPSC-Heps) may be suitable for treating liver diseases, but differentiation protocols often fail to yield adult-like cells. We hypothesised that replicating healthy liver niche biochemical and biophysical cues would produce hepatocytes with desired metabolic functionality. Using 2D synthetic hydrogels which independently control mechanical properties and biochemical cues, we found that culturing hPSC-Heps on surfaces matching the stiffness of fibrotic liver tissue upregulated expression of genes for RGD-binding integrins, and increased expression of YAP/TAZ and their transcriptional targets. Alternatively, culture on soft, healthy liver-like substrates drove increases in cytochrome p450 activity and ureagenesis. Knockdown of ITGB1 or reducing RGD-motif-containing peptide concentration in stiff hydrogels reduced YAP activity and improved metabolic functionality; however, on soft substrates, reducing RGD concentration had the opposite effect. Furthermore, targeting YAP activity with verteporfin or forskolin increased cytochrome p450 activity, with forskolin dramatically enhancing urea synthesis. hPSC-Heps could also be successfully encapsulated within RGD peptide-containing hydrogels without negatively impacting hepatic functionality, and compared to 2D cultures, 3D cultured hPSC-Heps secreted significantly less fetal liver-associated alpha-fetoprotein, suggesting furthered differentiation. Our platform overcomes technical hurdles in replicating the liver niche, and allowed us to identify a role for YAP/TAZ-mediated mechanosensing in hPSC-Hep differentiation.

In Vitro Models for the Study of Liver Biology and Diseases: Advances and Limitations

In vitro models of liver (patho)physiology, new technologies, and experimental approaches are progressing rapidly. Based on cell lines, induced pluripotent stem cells or primary cells derived from mouse or human liver as well as whole tissue (slices), such in vitro single- and multicellular models, including complex microfluidic organ-on-a-chip systems, provide tools to functionally understand mechanisms of liver health and disease. The International Society of Hepatic Sinusoidal Research (ISHSR) commissioned this working group to review the currently available in vitro liver models and describe the advantages and disadvantages of each in the context of evaluating their use for the study of liver functionality, disease modeling, therapeutic discovery, and clinical applicability.

Hipster microcarriers: exploring geometrical and topographical cues of non-spherical microcarriers in biomedical applications

Structure and organisation are key aspects of the native tissue environment, which ultimately condition cell fate via a myriad of processes, including the activation of mechanotransduction pathways. By modulating the formation of integrin-mediated adhesions and consequently impacting cell contractility, engineered geometrical and topographical cues may be introduced to activate downstream signalling and ultimately control cell morphology, proliferation, and differentiation. Microcarriers appear as attractive vehicles for cell-based tissue engineering strategies aiming to modulate this 3D environment, but also as vehicles for cell-free applications, given the ease in tuning their chemical and physical properties. In this review, geometry and topography are highlighted as two preponderant features in actively regulating interactions between cells and the extracellular matrix. While most studies focus on the 2D environment, we focus on how the incorporation of these strategies in 3D systems could be beneficial. The techniques applied to design 3D microcarriers with unique geometries and surface topographical cues are covered, as well as specific tissue engineering approaches employing these microcarriers. In fact, successfully achieving a functional histoarchitecture may depend on a combination of fine-tuned geometrically shaped microcarriers presenting intricately tailored topographical cues. Lastly, we pinpoint microcarrier geometry as a key player in cell-free biomaterial-based strategies, and its impact on drug release kinetics, the production of steerable microcarriers to target tumour cells, and as protein or antibody biosensors.

Bioinspired Sandcastle Worm-Derived Peptide-Based Hybrid Hydrogel for Promoting the Formation of Liver Spheroids

The generation of hepatic spheroids is beneficial for a variety of potential applications, including drug development, disease modeling, transplantation, and regenerative medicine. Natural hydrogels are obtained from tissues and have been widely used to promote the growth, differentiation, and retention of specific functionalities of hepatocytes. However, relying on natural hydrogels for the generation of hepatic spheroids, which have batch to batch variations, may in turn limit the previously mentioned potential applications. For this reason, we researched a way to establish a three-dimensional (3D) culture system that more closely mimics the interaction between hepatocytes and their surrounding microenvironments, thereby potentially offering a more promising and suitable system for drug development, disease modeling, transplantation, and regenerative medicine. Here, we developed self-assembling and bioactive hybrid hydrogels to support the generation and growth of hepatic spheroids. Our hybrid hydrogels (PC4/Cultrex) inspired by the sandcastle worm, an Arg-Gly-Asp (RGD) cell adhesion sequence, and bioactive molecules derived from Cultrex BME (Basement Membrane Extract). By performing optimizations to the design, the PC4/Cultrex hybrid hydrogels can enhance HepG2 cells to form spheroids and express their molecular signatures (e.g., Cyp3A4, Cyp7a1, A1at, Afp, Ck7, Ck1, and E-cad). Our study demonstrated that this hybrid hydrogel system offers potential advantages for hepatocytes in proliferating, differentiating, and self-organizing to form hepatic spheroids in a more controllable and reproducible manner. In addition, it is a versatile and cost-effective method for 3D tissue cultures in mass quantities. Importantly, we demonstrate that it is feasible to adapt a bioinspired approach to design biomaterials for 3D culture systems, which accelerates the design of novel peptide structures and broadens our research choices on peptide-based hydrogels.

Fabrication approaches for high-throughput and biomimetic disease modeling

There is often a tradeoff between in vitro disease modeling platforms that capture pathophysiologic complexity and those that are amenable to high-throughput fabrication and analysis. However, this divide is closing through the application of a handful of fabrication approaches-parallel fabrication, automation, and flow-driven assembly-to design sophisticated cellular and biomaterial systems. The purpose of this review is to highlight methods for the fabrication of high-throughput biomaterial-based platforms and showcase examples that demonstrate their utility over a range of throughput and complexity. We conclude with a discussion of future considerations for the continued development of higher-throughput in vitro platforms that capture the appropriate level of biological complexity for the desired application. STATEMENT OF SIGNIFICANCE: There is a pressing need for new biomedical tools to study and understand disease. These platforms should mimic the complex properties of the body while also permitting investigation of many combinations of cells, extracellular cues, and/or therapeutics in high-throughput. This review summarizes emerging strategies to fabricate biomimetic disease models that bridge the gap between complex tissue-mimicking microenvironments and high-throughput screens for personalized medicine.

Multiwell Combinatorial Hydrogel Array for High-Throughput Analysis of Cell-ECM Interactions

Biophysical cues in the extracellular matrix (ECM) regulate cell behavior in a complex, nonlinear, and interdependent manner. To quantify these important regulatory relationships and gain a comprehensive understanding of mechanotransduction, there is a need for high-throughput matrix platforms that enable parallel culture and analysis of cells in various matrix conditions. Here we describe a multiwell hyaluronic acid (HA) platform in which cells are cultured on combinatorial arrays of hydrogels spanning a range of elasticities and adhesivities. Our strategy utilizes orthogonal photopatterning of stiffness and adhesivity gradients, with the stiffness gradient implemented by a programmable light illumination system. The resulting platform allows individual treatment and analysis of each matrix environment while eliminating contributions of haptotaxis and durotaxis. In human mesenchymal stem cells, our platform recapitulates expected relationships between matrix stiffness, adhesivity, and cell mechanosensing. We further applied the platform to show that as integrin ligand density falls, cell adhesion and migration depend more strongly on CD44-mediated interactions with the HA backbone. We anticipate that our system could bear great value for mechanistic discovery and screening where matrix mechanics and adhesivity are expected to influence phenotype.

Exploring Interactions between Primary Hepatocytes and Non-Parenchymal Cells on Physiological and Pathological Liver Stiffness

Simple Summary

Chronic liver disease is characterized by progressive hepatic fibrosis leading to the formation of cirrhosis irrespective of the etiology with no effective treatment currently available. Liver stiffness (LS) is currently the best clinical predictor of this fibrosis progression irrespective of the cause of the disease. However, it is not well understood how does LS regulate the critical hepatocytes–non parenchymal cell interactions. We here present, to the best of our knowledge, the first analyses of the impact of physiological and pathological stiffness on hepatocytes–non parenchymal cell interaction. Our findings indicate the role of stiffness in regulating the hepatocytes interactions with NPCs necessary for maintenance of hepatocytes function.

Abstract

Chronic liver disease is characterized by progressive hepatic fibrosis leading to the formation of cirrhosis irrespective of the etiology with no effective treatment currently available. Liver stiffness (LS) is currently the best clinical predictor of this fibrosis progression irrespective of the etiology. LS and hepatocytes-nonparenchymal cells (NPC) interactions are two variables known to be important in regulating hepatic function during liver fibrosis, but little is known about the interplay of these cues. Here, we use polydimethyl siloxane (PDMS) based substrates with tunable mechanical properties to study how cell–cell interaction and stiffness regulates hepatocytes function. Specifically, primary rat hepatocytes were cocultured with NIH-3T3 fibroblasts on soft (2 kPa) and stiff substrates that recreates physiologic (2 kPa) and cirrhotic liver stiffness (55 kPa). Urea synthesis by primary hepatocytes depended on the presence of fibroblast and was independent of the substrate stiffness. However, albumin synthesis and Cytochrome P450 enzyme activity increased in hepatocytes on soft substrates and when in coculture with a fibroblast. Western blot analysis of hepatic markers, E-cadherin, confirmed that hepatocytes on soft substrates in coculture promoted better maintenance of the hepatic phenotype. These findings indicate the role of stiffness in regulating the hepatocytes interactions with NPCs necessary for maintenance of hepatocytes function.

Biomaterial-based cell delivery strategies to promote liver regeneration

Chronic liver disease and cirrhosis is a widespread and untreatable condition that leads to lifelong impairment and eventual death. The scarcity of liver transplantation options requires the development of new strategies to attenuate disease progression and reestablish liver function by promoting regeneration. Biomaterials are becoming an increasingly promising option to both culture and deliver cells to support in vivo viability and long-term function. There is a wide variety of both natural and synthetic biomaterials that are becoming established as delivery vehicles with their own unique advantages and disadvantages for liver regeneration. We review the latest developments in cell transplantation strategies to promote liver regeneration, with a focus on the use of both natural and synthetic biomaterials for cell culture and delivery. We conclude that future work will need to refine the use of these biomaterials and combine them with novel strategies that recapitulate liver organization and function in order to translate this strategy to clinical use.

Synthesis and characterization of site selective photo-crosslinkable glycidyl methacrylate functionalized gelatin-based 3D hydrogel scaffold for liver tissue engineering

The presented work outlined the development of a new biocompatible hydrogel material that has potential applications in soft tissue engineering. As a proof of concept, human hepatocytes were used to demonstrate the suitability of this material in providing conducive environment for cellular growth and functional development. Herein, a detailed synthesis of novel gelatin derivatives - photo-crosslinkable glycidyl methacrylate (GMA) functionalized gelatins (Gelatin-GMA), and preparation of three-dimensional (3D) hydrogel scaffolds for the encapsulated Huh-7.5 cells is reported. The Gelatin-GMA biopolymers were synthesized at two different pH values of 3.5 (acidic) and 10.5 (basic) where two different photo-crosslinkable polymers were formed utilizing -COOH & -OH groups in acidic pH, and -NH₂ & -OH groups in basic pH. The hydrogels were prepared using an initiator (Irgacure I2959) in the presence of UV light. The Gelatin-GMA biopolymers were characterized using spectroscopic studies which confirmed the successful preparation of the polymer derivatives. Rheological measurement was carried out to characterize the mechanical properties and derive the mesh sizes of the 3D hydrogels. Subsequently, detailed in vitro hepatocyte compatibility and functionality studies were performed in the 3D cell seeded hydrogel platform. The 3D hydrogel design with larger mesh sizes utilizes the advantage of the excellent diffusion properties of porous platform, and enhanced cell-growth was observed, which in turn elicited favorable Huh-7.5 response. The hydrogels led to improved cellular functions such as differentiation, viability and proliferation. Overall, it showed that the Gelatin-GMA based hydrogels presented better results compared to control sample (GelMA) because of the higher mesh sizes in Gelatin-GMA based hydrogels. Additionally, the functional group studies of the two Gelatin-GMA samples revealed that the cell functionalities are almost unaffected even after the tripeptide - Arg-Gly-Asp (RGD) in Gelatin-GMA synthesized at pH 3.5 is no longer completely available.

Synergistic control of mechanics and microarchitecture of 3D bioactive hydrogel platform to promote the regenerative potential of engineered hepatic tissue

Culturing autologous cells with therapeutic potential derived from a patient within a bioactive scaffold to induce functioning tissue formation is considered the ideal methodology towards realizing patient-specific regenerative medicine. Hydrogels are often employed as the scaffold material for this purpose mainly for their tunable mechanical and diffusional properties as well as presenting cell-responsive moieties. Herein, a two-fold strategy was employed to control the physicomechanical properties and microarchitecture of hydrogels to maximize the efficacy of engineered hepatic tissues. First, a hydrophilic polymeric crosslinker with a tunable degree of reactive functional groups was employed to control the mechanical properties in a wide range while minimizing the change in diffusional properties. Second, photolithography technique was utilized to introduce microchannels into hydrogels to overcome the critical diffusional limit of bulk hydrogels. Encapsulating hepatic progenitor cells derived via direct reprogramming of tissue-harvested fibroblasts, the application of this strategy to control the mechanics, diffusion, and architecture of hydrogels in a combinatorial manner could allow the optimization of their hepatic functions. The regenerative capacity of this engineered hepatic tissue was further demonstrated using an in vivo acute liver injury model.

Getting the big picture of cell-matrix interactions: High-throughput biomaterial platforms and systems-level measurements

Living cells interact with the extracellular matrix (ECM) in a complex and reciprocal manner. Much has been learned over the past few decades about cell-ECM interactions from targeted studies in which a specific matrix parameter (e.g. stiffness, adhesivity) has been varied across a few discrete values, or in which the level or activity of a protein is controlled in an isolated fashion. As the field moves forward, there is growing interest in addressing cell-matrix interactions from a systems perspective, which has spurred a new generation of matrix platforms capable of interrogating multiple ECM inputs in a combinatorial and parallelized fashion. Efforts are also actively underway to integrate specialized, synthetic ECM platforms with global measures of cell behaviors, including at the transcriptomic, proteomic and epigenomic levels. Here we review recent advances in both areas. We describe how new combinatorial ECM technologies are revealing unexpected crosstalk and nonlinearity in the relationship between cell phenotype and matrix properties. Similarly, efforts to integrate "omics" measurements with synthetic ECM platforms are illuminating how ECM properties can control cell biology in surprising and functionally important ways. We expect that advances in both areas will deepen the field's understanding of cell-ECM interactions and offer valuable insight into the design of biomaterials for specific biomedical applications.

Hepatic Polarization Accelerated by Mechanical Compaction Involves HNF4α Activation

There remain few data about the role of homeostatic compaction in hepatic polarization. A previous study has found that mechanical compaction can accelerate hepatocyte polarization; however, the cellular mechanism underlying the effect is mostly unclear. Hepatocyte nuclear factor 4 alpha (HNF4α) is crucial for hepatic polarization in liver morphogenesis. Therefore, we sought to identify any possible involvement of HNF4α in the process of hepatocyte polarization accelerated by mechanical compaction. We first verified in the nonhepatic cell model HEK-293T, and the hepatic cell model primary hepatocytes that the mechanical compaction on cell aggregates simulated by using transient centrifugation can directly activate the expression of HNF4α promoters. Moreover, data using primary hepatocytes showed that the HNF4α expression is positively associated with the levels of compaction force: 2.1-folds higher at the mRNA level and 2.1-folds higher at the protein level for 500 g vs. 0 g. Furthermore, activated HNF4α expression is associated with the enhanced biliary canalicular formation and the increased production of albumin and urea. Pretreatment with Latrunculin B, an inhibitor of F-actin, and SHE78-7, an inhibitor of E-cadherin, which both interrupt the pathway of mechanical transduction, partially but significantly reduced the HNF4α expression and production of albumin and urea. In conclusion, HNF4α can be actively involved in the hepatic polarization in the context of environmental mechanical compaction.

Liver Tissue Engineering as an Emerging Alternative for Liver Disease Treatment

Chronic liver diseases affect thousands of lives throughout the world every year. The shortage of liver donors for transplantation has been the main driving force to employ alternative methods such as liver tissue engineering (LTE) in fabricating a three-dimensional transplantable liver tissue or enhancing cell delivery techniques alleviating the need for liver donors. LTE consists of three components, cells, ECM (extracellular matrix), and signaling molecules, which we discuss the first and second. The three most common cell sources used in LTE are human and animal primary hepatocytes, and stem cells for different applications. Two major categories of ECM are used to mimic the microenvironment of these cells, named scaffolds and microbeads. Scaffolds have been made by numerous methods with a wide range of synthetic and natural biomaterials. Cell encapsulation has also been utilized by many polymeric biomaterials. To investigate their functions, many properties have been discussed in the literature, such as biochemical, geometrical, and mechanical properties, in both of these categories. Overall, LTE shows excellent potential in assisting hepatic disorders. However, some challenges exist that prevent the practical use of it clinically, making LTE an ongoing research subject in the scientific society.

Building a microfluidic cell culture platform with stiffness control using Loctite 3525 glue

The study of mechanotransduction signals and cell response to mechanical properties requires designing culture substrates that possess some, or ideally all, of the following characteristics: (1) biological compatibility and adhesive properties, (2) stiffness control or tunability in a dynamic mode, (3) patternability on the microscale and (4) integrability in microfluidic chips. The most common materials used to address cell mechanotransduction are hydrogels, due to their softness. However, they may be impractical when complex scaffolds are sought and they lack viscous dissipative properties that are very important in mechanobiology. In this work, we show that an off-the-shelf, biocompatible photosensitive glue, Loctite 3525, may be used readily in mechanobiology assays without any special treatment prior to fabrication of cell culture platforms. Despite a high (MPa) stiffness easily tunable by UV exposure time at a fixed dose, 3T3 fibroblasts showed a response to the mechanics of the material similar to that obtained on much softer (kPa) hydrogels. Loctite's viscous dissipation properties indeed seemed to be responsible for such cell mechanical response, as suggested by recent works where more complex two-phase hydrogels were employed. More interestingly, it was possible to stiffen soft Loctite substrates by post-exposing them during cell culture, to observe changes in cell spreading caused by a dynamic stiffness modification. Thanks to Loctite 3525's patternability, micropillars were also fabricated to demonstrate the compatibility with traction force microscopy studies. Finally, the glue was used as an excellent adhesion layer for hydrogels on glass or PDMS, without the need for additional treatment, enabling the easy fabrication of microfluidic chips integrating hydrogels.

Liver Tissue Engineering: Challenges and Opportunities

Liver tissue engineering aims at the possibility of reproducing a fully functional organ for the treatment of acute and chronic liver disorders. Approaches in this field endeavor to replace organ transplantation (gold standard treatment for liver diseases in a clinical setting) with in vitro developed liver tissue constructs. However, the complexity of the liver microarchitecture and functionality along with the limited supply of cellular components of the liver pose numerous challenges. This review provides a comprehensive outlook onto how the physicochemical, mechanobiological, and spatiotemporal aspects of the substrates could be tuned to address current challenges in the field. We also highlight the strategic advancements made in the field so far for the development of artificial liver tissue. We further showcase the currently available prototypes in research and clinical trials, which shows the hope for the future of liver tissue engineering.

Hepatocyte culture on 3D porous scaffolds of PCL/PMCL

The development of three-dimensional (3D) porous scaffolds for soft tissue engineering mainly focused on manipulation of scaffold properties with cell behaviors. By emulsion freeze-drying method, four types of porous scaffolds were prepared from amorphous poly(4-methy-ε-caprolactone) (PMCL) and semi-crystalline poly(ε-caprolactone) (PCL) at different weight ratios, named as PMCL0, PMCL30, PMCL50 and PMCL70, respectively. Visual observation on cross-sectional images of the scaffolds appeared as sponge-like materials with three-dimensional and highly porous morphologies. However, the pore size, porosity and wettability of blends were not decreased linearly with increasing amorphous PMCL. Distinguished from PMCL30 or PMCL70, PMCL50 preserved intact PCL crystals distributed in amorphous matrix, resulting in the lowest Young's modulus (E) and relatively high wettability. From in vitro cell culture, it was observed that PMCL50 scaffold supported human induced hepatocytes (hiHeps) proliferation and function preservation best among all scaffolds. hiHeps on PMCL50 inclined to adopt fibroblastic morphology, whereas formed spheroidal morphology on PMCL0. It was suggested that our bare scaffolds with tailored properties have shown remarkable capability towards hiHep proliferation and function expression.

Engineering 3D Hydrogels for Personalized In Vitro Human Tissue Models

There is a growing interest in engineering hydrogels for 3D tissue and disease models. The major motivation is to better mimic the physiological microenvironment of the disease and human condition. 3D tissue models derived from patients' own cells can potentially revolutionize the way treatment and diagnostic alternatives are developed. This requires development of tissue mimetic hydrogels with user defined and tunable properties. In this review article, a recent summary of 3D hydrogel platforms for in vitro tissue and disease modeling is given. Hydrogel design considerations and available hydrogel systems are summarized, followed by the types of currently available hydrogel models, such as bulk hydrogels, porous scaffolds, fibrous scaffolds, hydrogel microspheres, hydrogel sandwich systems, microwells, and 3D bioprinted constructs. Although hydrogels are utilized for a wide range of tissue models, this article focuses on liver and cancer models. This article also provides a detailed section on current challenges and future perspectives of hydrogel-based tissue models.

Bioengineering considerations in liver regenerative medicine

Background

Liver disease contributes significantly to global disease burden and is associated with rising incidence and escalating costs. It is likely that innovative approaches, arising from the emerging field of liver regenerative medicine, will counter these trends.

Main body

Liver regenerative medicine is a rapidly expanding field based on a rich history of basic investigations into the nature of liver structure, physiology, development, regeneration, and function. With a bioengineering perspective, we discuss all major subfields within liver regenerative medicine, focusing on the history, seminal publications, recent progress within these fields, and commercialization efforts. The areas reviewed include fundamental aspects of liver transplantation, liver regeneration, primary hepatocyte cell culture, bioartificial liver, hepatocyte transplantation and liver cell therapies, mouse liver repopulation, adult liver stem cell/progenitor cells, pluripotent stem cells, hepatic microdevices, and decellularized liver grafts.

Conclusion

These studies highlight the creative directions of liver regenerative medicine, the collective efforts of scientists, engineers, and doctors, and the bright outlook for a wide range of approaches and applications which will impact patients with liver disease.

On Materials for Cardiac Tissue Engineering

In this essay the authors argue that chamber pressure dominates the biomechanics of the contraction cycle of the heart, while tissue stiffness dominates the relaxation cycle. This appears to be an under-recognized challenge in cardiac tissue engineering. Optimal approaches will involve constructing chambers or modulating the stiffness of the scaffold/substrate in synchrony with the beating cycle.

Role for Mechanotransduction in Macrophage and Dendritic Cell Immunobiology

Tissue homeostasis is not only controlled by biochemical signals but also through mechanical forces that act on cells. Yet, while it has long been known that biochemical signals have profound effects on cell biology, the importance of mechanical forces has only been recognized much more recently. The types of mechanical stress that cells experience include stretch, compression, and shear stress, which are mainly induced by the extracellular matrix, cell-cell contacts, and fluid flow. Importantly, macroscale tissue deformation through stretch or compression also affects cellular function.Immune cells such as macrophages and dendritic cells are present in almost all peripheral tissues, and monocytes populate the vasculature throughout the body. These cells are unique in the sense that they are subject to a large variety of different mechanical environments, and it is therefore not surprising that key immune effector functions are altered by mechanical stimuli. In this chapter, we describe the different types of mechanical signals that cells encounter within the body and review the current knowledge on the role of mechanical signals in regulating macrophage, monocyte, and dendritic cell function.

Substrate Stiffness Modulates the Maturation of Human Pluripotent Stem-Cell-Derived Hepatocytes

Obtaining functional hepatocytes from human pluripotent stem cells (hPSCs) holds great potential for applications in drug safety testing, as well in the field of regenerative medicine. However, developing functionally mature hPSC-derived hepatocytes (hPSC-Heps) remains a challenge. We hypothesized that the cellular microenvironment plays a vital role in the maturation of immature hepatocytes. In this study, we examined the role of mechanical stiffness, a key component of the cellular microenvironment, in the maturation of hPSC-Heps. We cultured hPSC-Heps on collagen-coated polyacrylamide hydrogels with varying elastic moduli. On softer substrates the hPSC-Heps formed compact colonies while on stiffer substrates they formed a diffuse monolayer. We observed an inverse correlation between albumin production and substrate stiffness. The expression of key cytochrome enzymes, which are expressed at higher levels in the adult liver compared to the fetal liver, also correlated inversely with substrate stiffness, whereas fetal markers such as Cyp3A7 and AFP showed no correlation with stiffness. Culture of hPSC-Heps on soft substrates for 12 days led to 10-30 fold increases in the expression of drug-metabolizing enzymes. These results demonstrate that substrate stiffness similar to that of the liver enables aspects of the maturation of hPSC-Heps.

Normal and Fibrotic Rat Livers Demonstrate Shear Strain Softening and Compression Stiffening: A Model for Soft Tissue Mechanics

Tissues including liver stiffen and acquire more extracellular matrix with fibrosis. The relationship between matrix content and stiffness, however, is non-linear, and stiffness is only one component of tissue mechanics. The mechanical response of tissues such as liver to physiological stresses is not well described, and models of tissue mechanics are limited. To better understand the mechanics of the normal and fibrotic rat liver, we carried out a series of studies using parallel plate rheometry, measuring the response to compressive, extensional, and shear strains. We found that the shear storage and loss moduli G’ and G” and the apparent Young's moduli measured by uniaxial strain orthogonal to the shear direction increased markedly with both progressive fibrosis and increasing compression, that livers shear strain softened, and that significant increases in shear modulus with compressional stress occurred within a range consistent with increased sinusoidal pressures in liver disease. Proteoglycan content and integrin-matrix interactions were significant determinants of liver mechanics, particularly in compression. We propose a new non-linear constitutive model of the liver. A key feature of this model is that, while it assumes overall liver incompressibility, it takes into account water flow and solid phase compressibility. In sum, we report a detailed study of non-linear liver mechanics under physiological strains in the normal state, early fibrosis, and late fibrosis. We propose a constitutive model that captures compression stiffening, tension softening, and shear softening, and can be understood in terms of the cellular and matrix components of the liver.

Substrate stiffness regulates primary hepatocyte functions

Liver fibrosis occurs as a consequence of chronic injuries from viral infections, metabolic disorders, and alcohol abuse. Fibrotic liver microenvironment (LME) is characterized by excessive deposition and aberrant turnover of extracellular matrix proteins, which leads to increased tissue stiffness. Liver stiffness acts as a vital cue in the regulation of hepatic responses in both healthy and diseased states; however, the effect of varying stiffness on liver cells is not well understood. There is a critical need to engineer in vitro models that mimic the liver stiffness corresponding to various stages of disease progression in order to elucidate the role of individual cellular responses. Here we employed polydimethyl siloxane (PDMS) based substrates with tunable mechanical properties to investigate the effect of substrate stiffness on the behavior of primary rat hepatocytes. To recreate physiologically relevant stiffness, we designed soft substrates (2 kPa) to represent the healthy liver and stiff substrates (55 kPa) to represent the diseased liver. Tissue culture plate surface (TCPS) served as the control substrate. We observed that hepatocytes cultured on soft substrates displayed a more differentiated and functional phenotype for a longer duration as compared to stiff substrates and TCPS. We demonstrated that hepatocytes on soft substrates exhibited higher urea and albumin synthesis. Cytochrome P450 (CYP) activity, another critical marker of hepatocytes, displayed a strong dependence on substrate stiffness, wherein hepatocytes on soft substrates retained 2.7 fold higher CYP activity on day 7 in culture, as compared to TCPS. We further observed that an increase in stiffness induced downregulation of key drug transporter genes (NTCP, UGT1A1, and GSTM-2). In addition, we observed that the epithelial cell phenotype was better maintained on soft substrates as indicated by higher expression of hepatocyte nuclear factor 4α, cytokeratin 18, and connexin 32. These results indicate that the substrate stiffness plays a significant role in modulating hepatocyte behavior. Our PDMS based liver model can be utilized to investigate the signaling pathways mediating the hepatocyte-LME communication to understand the progression of liver diseases.

Hepatic stellate cells: central modulators of hepatic carcinogenesis

Hepatocellular carcinoma (HCC) represents the second most common cause of cancer-related death worldwide, and is increasing in incidence. Currently, our therapeutic repertoire for the treatment of HCC is severely limited, and therefore effective new therapies are urgently required. Recently, there has been increasing interest focusing on the cellular and molecular interactions between cancer cells and their microenvironment. HCC represents a unique opportunity to study the relationship between a diseased stroma and promotion of carcinogenesis, as 90 % of HCCs arise in a cirrhotic liver. Hepatic stellate cells (HSC) are the major source of extracellular proteins during fibrogenesis, and may directly, or via secreted products, contribute to tumour initiation and progression. In this review we explore the complex cellular and molecular interplay between HSC biology and hepatocarcinogenesis. We focus on the molecular mechanisms by which HSC modulate HCC growth, immune cell evasion and angiogenesis. This is followed by a discussion of recent progress in the field in understanding the mechanistic crosstalk between HSC and HCC, and the pathways that are potentially amenable to therapeutic intervention. Furthermore, we summarise the exciting recent developments in strategies to target HSC specifically, and novel techniques to deliver pharmaceutical agents directly to HSC, potentially allowing tailored, cell-specific therapy for HCC.

Simple polyacrylamide-based multiwell stiffness assay for the study of stiffness-dependent cell responses

Currently, most of the in vitro cell research is performed on rigid tissue culture polystyrene (~1 GPa), while most cells in the body are attached to a matrix that is elastic and much softer (0.1-100 kPa). Since such stiffness mismatch greatly affects cell responses, there is a strong interest in developing hydrogel materials that span a wide range of stiffness to serve as cell substrates. Polyacrylamide gels, which are inexpensive and cover the stiffness range of all soft tissues in the body, are the hydrogel of choice for many research groups. However, polyacrylamide gel preparation is lengthy, tedious, and only suitable for small batches. Here, we describe an assay which by utilizing a permanent flexible plastic film as a structural support for the gels, enables the preparation of polyacrylamide gels in a multiwell plate format. The technique is faster, more efficient, and less costly than current methods and permits the preparation of gels of custom sizes not otherwise available. As it doesn't require any specialized equipment, the method could be easily adopted by any research laboratory and would be particularly useful in research focused on understanding stiffness-dependent cell responses.

Photopatterning of hydrogel scaffolds coupled to filter materials using stereolithography for perfused 3D culture of hepatocytes

In vitro models that recapitulate the liver's structural and functional complexity could prolong hepatocellular viability and function to improve platforms for drug toxicity studies and understanding liver pathophysiology. Here, stereolithography (SLA) was employed to fabricate hydrogel scaffolds with open channels designed for post-seeding and perfused culture of primary hepatocytes that form 3D structures in a bioreactor. Photopolymerizable polyethylene glycol-based hydrogels were fabricated coupled to chemically activated, commercially available filters (polycarbonate and polyvinylidene fluoride) using a chemistry that permitted cell viability, and was robust enough to withstand perfused culture of up to 1 µL/s for at least 7 days. SLA energy dose, photoinitiator concentrations, and pretreatment conditions were screened to determine conditions that maximized cell viability and hydrogel bonding to the filter. Multiple open channel geometries were readily achieved, and included ellipses and rectangles. Rectangular open channels employed for subsequent studies had final dimensions on the order of 350 µm by 850 µm. Cell seeding densities and flow rates that promoted cell viability were determined. Perfused culture of primary hepatocytes in hydrogel scaffolds in the presence of soluble epidermal growth factor (EGF) prolonged the maintenance of albumin production throughout the 7-day culture relative to 2D controls. This technique of bonding hydrogel scaffolds can be employed to fabricate soft scaffolds for a number of bioreactor configurations and applications.

Modulation of Huh7.5 spheroid formation and functionality using modified PEG-based hydrogels of different stiffness

Physical cues, such as cell microenvironment stiffness, are known to be important factors in modulating cellular behaviors such as differentiation, viability, and proliferation. Apart from being able to trigger these effects, mechanical stiffness tuning is a very convenient approach that could be implemented readily into smart scaffold designs. In this study, fibrinogen-modified poly(ethylene glycol)-diacrylate (PEG-DA) based hydrogels with tunable mechanical properties were synthesized and applied to control the spheroid formation and liver-like function of encapsulated Huh7.5 cells in an engineered, three-dimensional liver tissue model. By controlling hydrogel stiffness (0.1–6 kPa) as a cue for mechanotransduction representing different stiffness of a normal liver and a diseased cirrhotic liver, spheroids ranging from 50 to 200 μm were formed over a three week time-span. Hydrogels with better compliance (i.e. lower stiffness) promoted formation of larger spheroids. The highest rates of cell proliferation, albumin secretion, and CYP450 expression were all observed for spheroids in less stiff hydrogels like a normal liver in a healthy state. We also identified that the hydrogel modification by incorporation of PEGylated-fibrinogen within the hydrogel matrix enhanced cell survival and functionality possibly owing to more binding of autocrine fibronectin. Taken together, our findings establish guidelines to control the formation of Huh7.5 cell spheroids in modified PEGDA based hydrogels. These spheroids may serve as models for applications such as screening of pharmacological drug candidates.

Multiwell stiffness assay for the study of cell responsiveness to cytotoxic drugs

It is now well understood that the cell microenvironment, including the surrounding matrix, profoundly affects cell fate. This is especially true for solid tumors where, for example, matrix stiffness is believed to be an important factor in tumorogenesis. Our hypothesis is that since matrix stiffness affects cell fate, it may also be important in drug resistance. To test this hypothesis, we designed and built a multiwell polyacrylamide (PA) gel-based stiffness assay, in which the gels were coated with collagen in order to facilitate cell attachment and proliferation. This PA-based assay was used to examine the effect of stiffness on cultured cell responsiveness to cytotoxic drugs. In particular, we tested multiple cancer cell lines and their susceptibility to paclitaxel, a microtubule-targeting agent. By assessing cell proliferation, morphology, and the IC50 of the drug, we were able to establish that the stiffness affects responsiveness to cytotoxic drugs in a cell-dependent manner.

Multilayered heparin hydrogel microwells for cultivation of primary hepatocytes

The biomaterial scaffolds for regenerative medicine need to be rationally designed to achieve the desired cell fate and function. This paper describes the development of hydrogel microstructures for cultivation of primary hepatocytes. Four different micropatterned surfaces are tested: 1) poly(ethyelene glycol) (PEG) microwells patterned on glass, 2) heparin hydrogel microwells patterned on glass, 3) PEG microwells patterned on heparin hydrogel-coated substrates, and 4) heparin hydrogel microwells patterned on heparin hydrogel-coated substrates. The latter surfaces are constructed by a combination of micromolding and microcontact printing techniques to create microwells with both walls and floor composed of heparin hydrogel. Individual microwell dimensions are 200 μm diameter and 20 μm in height. In all cases, the floor of the microwells is modified with collagen I to promote cell adhesion. Cultivation of hepatocytes followed by analysis of hepatic markers (urea production, albumin synthesis, and E-cadherin expression) reveals that the all-heparin gel microwells are most conducive to hepatic phenotype maintenance. For example, ELISA analysis shows 2.3 to 13.1 times higher levels of albumin production in all-heparin gel wells compared with other micropatterned surfaces. Importantly, hepatic phenotype expression can be further enhanced by culturing fibroblasts on the heparin gel walls of the microwells. In the future, multicomponent all-heparin gel microstructures may be employed in designing hepatic niche for liver-specific differentiation of stem cells.

Biomaterials for liver tissue engineering

Liver extracellular matrix (ECM) composition, topography and biomechanical properties influence cell-matrix interactions. The ECM presents guiding cues for hepatocyte phenotype maintenance, differentiation and proliferation both in vitro and in vivo. Current understanding of such cell-guiding cues along with advancement of techniques for scaffold fabrication has led to evolution of matrices for liver tissue culture from simple porous scaffolds to more complex 3D matrices with microarchitecture similar to in vivo. Natural and synthetic polymeric biomaterials fabricated in different topographies and porous matrices have been used for hepatocyte culture. Heterotypic and homotypic cell interactions are necessary for developing an adult liver as well as an artificial liver. A high oxygen demand of hepatocytes as well as graded oxygen distribution in liver is another challenging attribute of the normal liver architecture that further adds to the complexity of engineered substrate design. A balanced interplay of cell-matrix interactions along with cell-cell interactions and adequate supply of oxygen and nutrient determines the success of an engineered substrate for liver cells. Techniques devised to incorporate these features of hepatic function and mimic liver architecture range from maintaining liver cells in mm-sized tailor-made scaffolds to a more bottoms up approach that starts from building the microscopic subunit of the whole tissue. In this review, we discuss briefly various biomaterials used for liver tissue engineering with respect to design parameters such as scaffold composition and chemistry, biomechanical properties, topography, cell-cell interactions and oxygenation.

Characterizing the effects of heparin gel stiffness on function of primary hepatocytes

In the liver, hepatocytes are exposed to a large array of stimuli that shape hepatic phenotype. This in vivo microenvironment is lost when hepatocytes are cultured in standard cell cultureware, making it challenging to maintain hepatocyte function in vitro. Our article focused on one of the least studied inducers of the hepatic phenotype-the mechanical properties of the underlying substrate. Gel layers comprised of thiolated heparin (Hep-SH) and diacrylated poly(ethylene glycol) (PEG-DA) were formed on glass substrates via a radical mediated thiol-ene coupling reaction. The substrate stiffness varied from 10 to 110 kPa by changing the concentration of the precursor solution. ELISA analysis revealed that after 5 days, hepatocytes cultured on a softer heparin gel were synthesizing five times higher levels of albumin compared to those on a stiffer heparin gel. Immunofluorescent staining for hepatic markers, albumin and E-cadherin, confirmed that softer gels promoted better maintenance of the hepatic phenotype. Our findings point to the importance of substrate mechanical properties on hepatocyte function.

The effect of substrate modulus on the growth and function of matrix-embedded endothelial cells

Endothelial cells (EC) are potent bioregulatory cells, modulating thrombosis, inflammation and control over mural smooth muscle cells and vascular health. The biochemical roles of EC are retained when cells are embedded within three-dimensional (3D) denatured collagen matrices. Though substrate mechanics have long been known to affect cellular morphology and function and 3D-EC systems are increasingly used as therapeutic modalities little is known about the effect of substrate mechanics on EC in these 3D systems. In this work, we examined the effect of isolated changes in modulus on EC growth and morphology, extracellular matrix gene expression, modulation of smooth muscle cell growth, and immunogenicity. EC growth, but not morphology was dependent on scaffold modulus. Increased scaffold modulus reduced secretion of smooth muscle cell growth inhibiting heparan sulfate proteoglycans (HSPGs), but had no effect on secreted growth factors, resulting in a loss of smooth muscle cell growth inhibition by EC on high modulus scaffolds. Expression of ICAM-1, VCAM-1 and induction of CD4(+) T cell proliferation was reduced by increased scaffold modulus, and correlated with changes in integrin α5 expression. Expression of several common ECM proteins by EC on stiffer substrates dropped, including collagen IV(α1), collagen IV(α5), fibronectin, HSPGs (perlecan and biglycan). In contrast, expression of elastin and TIMPs were increased. This work shows even modest changes in substrate modulus can have a significant impact on EC function in three-dimensional systems. The mechanism of these changes is not clear, but the data presented here within suggests a model wherein EC attempt to neutralize changes in environmental force balance by altering ECM and integrin expression, leading to changes in effects on downstream signaling and function.

The influence of matrix elasticity on chondrocyte behavior in 3D

Cells actively probe the stiffness of their surrounding and respond to it. The authors recently found that maintenance of the chondrogenic phenotype was directly influenced by this property in 2D. Since studies about this process in 3D are still largely absent, this study aimed to transfer this knowledge into a 3D environment. Agarose was modified with RGD to allow active stiffness sensing or RGE as a control. Hydrogels with different mechanical properties were produced by using different concentrations of agarose. Primary chondrocytes were incorporated into the gel, cultured for up to two weeks, and then constructs were analyzed. Cells were surrounded by their own ECM from an early stage and maintained their chondrogenic phenotype, independent of substrate composition, as indicated by a high collagen type II and a lack of collagen type I production. However, softer gels showed higher DNA and GAG content and larger cell clusters than stiff gels in both RGD- and RGE-modified agarose. The authors hypothesize that matrix elasticity in the tested range does not influence the maintenance of the chondrogenic phenotype in 3D but rather the size of the formed cell ECM clusters. The deviation of these findings from previous results in 2D stresses the importance of moving towards 3D systems that more closely mimic in vivo conditions.

A hitchhiker's guide to mechanobiology

More than a century ago, it was proposed that mechanical forces could drive tissue formation. However, only recently with the advent of enabling biophysical and molecular technologies are we beginning to understand how individual cells transduce mechanical force into biochemical signals. In turn, this knowledge of mechanotransduction at the cellular level is beginning to clarify the role of mechanics in patterning processes during embryonic development. In this perspective, we will discuss current mechanotransduction paradigms, along with the technologies that have shaped the field of mechanobiology.

A multiwell platform for studying stiffness-dependent cell biology

Adherent cells are typically cultured on rigid substrates that are orders of magnitude stiffer than their tissue of origin. Here, we describe a method to rapidly fabricate 96 and 384 well platforms for routine screening of cells in tissue-relevant stiffness contexts. Briefly, polyacrylamide (PA) hydrogels are cast in glass-bottom plates, functionalized with collagen, and sterilized for cell culture. The Young's modulus of each substrate can be specified from 0.3 to 55 kPa, with collagen surface density held constant over the stiffness range. Using automated fluorescence microscopy, we captured the morphological variations of 7 cell types cultured across a physiological range of stiffness within a 384 well plate. We performed assays of cell number, proliferation, and apoptosis in 96 wells and resolved distinct profiles of cell growth as a function of stiffness among primary and immortalized cell lines. We found that the stiffness-dependent growth of normal human lung fibroblasts is largely invariant with collagen density, and that differences in their accumulation are amplified by increasing serum concentration. Further, we performed a screen of 18 bioactive small molecules and identified compounds with enhanced or reduced effects on soft versus rigid substrates, including blebbistatin, which abolished the suppression of lung fibroblast growth at 1 kPa. The ability to deploy PA gels in multiwell plates for high throughput analysis of cells in tissue-relevant environments opens new opportunities for the discovery of cellular responses that operate in specific stiffness regimes.

Polyelectrolyte multilayer nanofilms used as thin materials for cell mechano-sensitivity studies

Three types of multilayer films made from poly(L-lysine)/hyaluronan, chitosan/hyaluronan, and poly(allylamine hydrochloride)/poly(L-glutamic acid), were used to investigate the interplay between film mechano-chemical properties and cell adhesion. We showed that C2C12 myoblast adhesion and proliferation depended on the extent of film cross-linking for all films whatever their internal chemistry. Cell spreading areas were found to correlate with the film's stiffness and to be distributed over a unique curve. Immuno-staining of the cytoskeletal components revealed the formation of F-actin stress fibers and vinculin plaques only on stiff films. Finally, we compared our results with previous studies performed on polyacrylamide and PDMS gels, two recognized materials for mechano-sensitivity studies. We found that the effect of substrate stiffness on cell spreading is material-dependent.

Lessons from (patho)physiological tissue stiffness and their implications for drug screening, drug delivery and regenerative medicine

Diseased tissues are noted for their compromised mechanical properties, which contribute to organ failure; regeneration entails restoration of tissue structure and thereby functions. Thus, the physical signature of a tissue is closely associated with its biological function. In this review, we consider a mechanics-centric view of disease and regeneration by drawing parallels between in vivo tissue-level observations and corroborative cellular evidence in vitro to demonstrate the importance of the mechanical stiffness of the extracellular matrix in these processes. This is not intended to devalue the importance of biochemical signaling; in fact, as we discuss, many mechanical stiffness-driven processes not only require cooperation with biochemical cues, but they ultimately converge at common signaling cascades to influence cell and tissue function in an integrative manner. The study of how physical and biochemical signals collectively modulate cell function not only brings forth a more holistic understanding of cell (patho)biology, but it also creates opportunities to control material properties to improve culture platforms for research and drug screening and aid in the rationale design of biomaterials for molecular therapy and tissue engineering applications.

Elastic modulus determination of normal and glaucomatous human trabecular meshwork

PURPOSE

Elevated intraocular pressure (IOP) is a risk factor for glaucoma. The principal outflow pathway for aqueous humor in the human eye is through the trabecular meshwork (HTM) and Schlemm's canal (SC). The junction between the HTM and SC is thought to have a significant role in the regulation of IOP. A possible mechanism for the increased resistance to flow in glaucomatous eyes is an increase in stiffness (increased elastic modulus) of the HTM. In this study, the stiffness of the HTM in normal and glaucomatous tissue was compared, and a mathematical model was developed to predict the impact of changes in stiffness of the juxtacanalicular layer of HTM on flow dynamics through this region.

METHODS

Atomic force microscopy (AFM) was used to measure the elastic modulus of normal and glaucomatous HTM. According to these results, a model was developed that simulated the juxtacanalicular layer of the HTM as a flexible membrane with embedded pores.

RESULTS

The mean elastic modulus increased substantially in the glaucomatous HTM (mean = 80.8 kPa) compared with that in the normal HTM (mean = 4.0 kPa). Regional variation was identified across the glaucomatous HTM, possibly corresponding to the disease state. Mathematical modeling suggested an increased flow resistance with increasing HTM modulus.

CONCLUSIONS

The data indicate that the stiffness of glaucomatous HTM is significantly increased compared with that of normal HTM. Modeling exercises support substantial impairment in outflow facility with increased HTM stiffness. Alterations in the biophysical attributes of the HTM may participate directly in the onset and progression of glaucoma.

The applications of atomic force microscopy to vision science

The atomic force microscope (AFM) is widely used in materials science and has found many applications in biological sciences but has been limited in use in vision science. The AFM can be used to image the topography of soft biological materials in their native environments. It can also be used to probe the mechanical properties of cells and extracellular matrices, including their intrinsic elastic modulus and receptor-ligand interactions. In this review, the operation of the AFM is described along with a review of how it has been thus far used in vision science. It is hoped that this review will serve to stimulate vision scientists to consider incorporating AFM as part of their research toolkit.

Synthetic materials in the study of cell response to substrate rigidity

While it has long been understood that cells can sense and respond to a variety of stimuli, including soluble and insoluble factors, light, and externally applied mechanical stresses, the extent to which cells can sense and respond to the mechanical properties of their environment has only recently begun to be studied. Cell response to substrate stiffness has been suggested to play an important role in processes ranging from developmental morphogenesis to the pathogenesis of disease states and may have profound implications for cell and tissue culture and tissue engineering. Given the importance of this phenomenon, there is a clear need for systems for cell study in which substrate mechanics can be carefully defined and varied independently of biochemical and other signals. This review will highlight past work in the field of cell response to substrate rigidity as well as areas for future study.

Cell Guidance by 3D-Gradients in Hydrogel Matrices: Importance for Biomedical Applications

Concentration gradients of soluble and matrix-bound guidance cues in the extracellular matrix direct cell growth in native tissues and are of great interest for design of biomedical scaffolds and on implant surfaces. The focus of this review is to demonstrate the importance of gradient guidance for cells as it would be desirable to direct cell growth onto/into biomedical devices. Many studies have been described that illustrate the production and characterization of surface gradients, but three dimensional (3D)-gradients that direct cellular behavior are not well investigated. Hydrogels are considered as synthetic replacements for native extracellular matrices as they share key functions such as 2D- or 3D-solid support, fibrous structure, gas- and nutrition permeability and allow storage and release of biologically active molecules. Therefore this review focuses on current studies that try to implement soluble or covalently-attached gradients of growth factors, cytokines or adhesion sequences into 3D-hydrogel matrices in order to control cell growth, orientation and migration towards a target. Such gradient architectures are especially desirable for wound healing purposes, where defined cell populations need to be recruited from the blood stream and out of the adjacent tissue, in critical bone defects, for vascular implants or neuronal guidance structures where defined cell populations should be guided by appropriate signals to reach their proper positions or target tissues in order to accomplish functional repair.