Human bone derived cell culture on PLGA flat sheet membranes of different lactide:glycolide ratio

Mathematical and computational models for bone tissue engineering in bioreactor systems

Research into cellular engineered bone grafts offers a promising solution to problems associated with the currently used auto- and allografts. Bioreactor systems can facilitate the development of functional cellular bone grafts by augmenting mass transport through media convection and shear flow-induced mechanical stimulation. Developing successful and reproducible protocols for growing bone tissue in vitro is dependent on tuning the bioreactor operating conditions to the specific cell type and graft design. This process, largely reliant on a trial-and-error approach, is challenging, time-consuming and expensive. Modelling can streamline the process by providing further insight into the effect of the bioreactor environment on the cell culture, and by identifying a beneficial range of operational settings to stimulate tissue production. Models can explore the impact of changing flow speeds, scaffold properties, and nutrient and growth factor concentrations. Aiming to act as an introductory reference for bone tissue engineers looking to direct their experimental work, this article presents a comprehensive framework of mathematical models on various aspects of bioreactor bone cultures and overviews modelling case studies from literature.

* Engineering Membranes for Bone Regeneration

This review is focused on the use of membranes for the specific application of bone regeneration. The first section focuses on the relevance of membranes in this context and what are the specifications that they should possess to improve the regeneration of bone. Afterward, several techniques to engineer bone membranes by using "bulk"-like methods are discussed, where different parameters to induce bone formation are disclosed in a way to have desirable structural and functional properties. Subsequently, the production of nanostructured membranes using a bottom-up approach is discussed by highlighting the main advances in the field of bone regeneration. Primordial importance is given to the promotion of osteoconductive and osteoinductive capability during the membrane design. Whenever possible, the films prepared using different techniques are compared in terms of handability, bone guiding ability, osteoinductivity, adequate mechanical properties, or biodegradability. A last chapter contemplates membranes only composed by cells, disclosing their potential to regenerate bone.

Hollow fibre membrane bioreactors for tissue engineering applications

Hollow fibre membrane bioreactors (HFB) provide a novel approach towards tissue engineering applications in the field of regenerative medicine. For adherent cell types, HFBs offer an in vivo-like microenvironment as each fibre replicates a blood capillary and the mass transfer rate across the wall is independent from the shear stresses experienced by the cell. HFB also possesses the highest surface area to volume ratio of all bioreactor configurations. In theory, these factors enable a high quantity of the desired cellular product with less population variation, and favourable operating costs. Experimental analyses of different cell types and bioreactor designs show encouraging steps towards producing a clinically relevant device. This review discusses the basic HFB design for cell expansion and in vitro models; compares data produced on commercially available systems and addresses the operational differences between theory and practice. HFBs are showing some potential for mammalian cell culture but further work is needed to fully understand the complexities of cell culture in HFBs and how best to achieve the high theoretical cell yields.

Physicochemical properties and applications of poly(lactic-co-glycolic acid) for use in bone regeneration

Poly(lactic-co-glycolic acid) (PLGA) is the most often used synthetic polymer within the field of bone regeneration owing to its biocompatibility and biodegradability. As a consequence, a large number of medical devices comprising PLGA have been approved for clinical use in humans by the American Food and Drug Administration. As compared with the homopolymers of lactic acid poly(lactic acid) and poly(glycolic acid), the co-polymer PLGA is much more versatile with regard to the control over degradation rate. As a material for bone regeneration, the use of PLGA has been extensively studied for application and is included as either scaffolds, coatings, fibers, or micro- and nanospheres to meet various clinical requirements.

Recellularization of decellularized human adipose-tissue-derived extracellular matrix sheets with other human cell types

Decellularized human extracellular matrices (ECMs) are an extremely appealing biomaterial for tissue engineering and regenerative medicine. In this study, we decellularized human adipose tissue, fabricated a thin ECM sheet and explored the potential of this human adipose-derived ECM sheet as a substrate to support the formation of tissues other than adipose tissue. Acellular ECM sheets were fabricated from human adipose tissue through successive physical and chemical treatments: homogenization, centrifugation, casting, freeze-drying and sodium dodecyl sulfate treatment. The ECM sheets exhibited good mechanical properties, despite their porous structure. They degraded quickly in the presence of collagenase and the degradation rate increased with the collagenase concentration in phosphate-buffered saline. Five different human cell types, covering a broad range of cells and applications (normal human dermal fibroblasts, human aortic smooth muscle cells, human chondrocytes, human umbilical vein endothelial cells and human adipose-derived stem cells), were seeded onto the ECM sheets. All the human cell types spread well, proliferated and were successfully integrated into the decellularized ECM sheet. Overall, the results suggest that recellularized ECM sheets are a promising substitute for defective or damaged human tissues.

Improving fluorescence imaging of biological cells on biomedical polymers

Immunofluorescence imaging on polymeric biomaterials is often inhibited by autofluorescence and other optical phenomena. This often limits the analysis that can be performed on cells that are in contact with these materials. This study outlines a method that will quench these inhibitive optical phenomena on a variety of polymeric materials, including poly(glycerol sebacate), poly(urethane), poly(L-lactide-co-ε-caprolactone), and poly(lactic acid-co-glycolic acid). The method uses a simple material treatment method utilizing Sudan Black B (SB), which is commonly used as an autofluorescence quenching molecule in tissue histology, but has not yet been used in biomaterials analysis. The quenching mechanism in the selected polymers is investigated using attenuated total reflectance Fourier transform infrared spectroscoy, ultraviolet-visible light absorbance and fluorescence analysis, and scanning electron microscopyobservation of the material morphology prior to and after SB treatment. The results point to SB eliminating the inhibitive light phenomena of these materials by two methods: (i) chemical interaction between SB and the polymer molecules and (ii) physical interaction whereby SB forms a physical barrier that can absorb scattered light and quench autofluorescence interference during fluorescence microscopy. The studies show that the treatment of polymers with SB is robust across the polymers tested, in both porous and non-porous formats. The method does not interfere with immunofluorescent imaging of fluorescently labeled biological cells cultured on these polymers. This quick, simple, and affordable method enables a variety of analyses to be conducted that may otherwise have been impractical or impossible.

Application of conductive polymers, scaffolds and electrical stimulation for nerve tissue engineering

Among the numerous attempts to integrate tissue engineering concepts into strategies to repair nearly all parts of the body, neuronal repair stands out. This is partially due to the complexity of the nervous anatomical system, its functioning and the inefficiency of conventional repair approaches, which are based on single components of either biomaterials or cells alone. Electrical stimulation has been shown to enhance the nerve regeneration process and this consequently makes the use of electrically conductive polymers very attractive for the construction of scaffolds for nerve tissue engineering. In this review, by taking into consideration the electrical properties of nerve cells and the effect of electrical stimulation on nerve cells, we discuss the most commonly utilized conductive polymers, polypyrrole (PPy) and polyaniline (PANI), along with their design and modifications, thus making them suitable scaffolds for nerve tissue engineering. Other electrospun, composite, conductive scaffolds, such as PANI/gelatin and PPy/poly(ε-caprolactone), with or without electrical stimulation, are also discussed. Different procedures of electrical stimulation which have been used in tissue engineering, with examples on their specific applications in tissue engineering, are also discussed.

Definition and validation of operating equations for poly(vinyl alcohol)-poly(lactide-co-glycolide) microfiltration membrane-scaffold bioreactors

The aim of this work is to provide operating data for biodegradable hollow fiber membrane bioreactors. The physicochemical cell culture environment can be controlled with the permeate flowrate, so this aim necessitates the provision of operating equations that enable end-users to set the pressures and feed flowrates to obtain their desired culture environment. In this paper, theoretical expressions for the pure water retentate and permeate flowrates, derived using lubrication theory, are compared against experimental data for a single fiber poly(vinyl alcohol)–poly(lactide-co-glycolide) crossflow module to give values for the membrane permeability and slip. Analysis of the width of the boundary layer region where slip effects are important, together with the sensitivity of the retentate and permeate equations to the slip parameter, show that slip is insignificant for these membranes, which have a mean pore diameter of 1.1 µm. The experimental data is used to determine a membrane permeability, of k = 1.86 × 10⁻¹⁶ m², and to validate the model. It was concluded that the operating equation that relates the permeate to feed ratio, c, lumen inlet flowrate, Q_l,in, lumen outlet pressure, P₁, and ECS outlet pressure, P₀, is1 where A and B are constants that depend on the membrane permeability and geometry (and are given explicitly). Finally, two worked examples are presented to demonstrate how a tissue engineer can use Equation 1 to specify operating conditions for their bioreactor.

Post-culture treatment protocols for PLGA membrane scaffolds

The interactions of post-culture treatments reagents used for fixing, lysing and cell quantification on poly(lactide-co-glycolide) (PLGA) flat sheet membrane scaffolds are presented. Lysing with Alkaline buffer solution/Triton X-100/MilliQ water (ATM) and fixing with 10% Neutral Buffered Formalin (10% NBF) had no affect on membrane structure while fixing with 95% ethanol caused smoothing of the surface, shrinkage and a reduction in surface area of 55, 48 and 33, for 100:0, 75:25 and 50:50 (PLA:PGA), respectively. PicoGreen assay was selected for cell (560pZIPv.neo) quantification since the background noise would not affect readings for cell numbers over 3,000 cells/cm(2), while the background reading was too high for MTT and Methylene Blue (MB). MB at 0.5% (w/v) was, however, deemed suitable for visualising cell morphology on the membranes. Furthermore ATM buffer was suitable for the PicoGreen assay, which allows the same samples to be used for quantification of alkaline phosphatase activity.