Preparation of connexin43-integrated giant Liposomes by a baculovirus expression-liposome fusion method

Connexin-Containing Vesicles for Drug Delivery

Connexin is a transmembrane protein present on the cell membrane of most cell types. Connexins assemble into a hexameric hemichannel known as connexon that pairs with another hemichannel present on a neighboring cell to form gap junction that acts as a channel or pore for the transport of ions and small molecules between the cytoplasm of the two cells. Extracellular vesicles released from connexin-expressing cells could carry connexin hemichannels on their surface and couple with another connexin hemichannel on a distant recipient cell to allow the transfer of the intravesicular content directly into the cytoplasm. Connexin-containing vesicles can be potentially utilized for intracellular drug delivery. In this review, we introduced cell-derived, connexin-containing extracellular vesicles and cell-free connexin-containing liposomes, methods of preparing them, procedures to load cargos in them, factors regulating the connexin hemichannel activity, (potential) applications of connexin-containing vesicles in drug delivery, and finally the challenges and future directions in realizing the promises of this platform delivery system for (intracellular) drug delivery.

Fusogenic Hybrid Extracellular Vesicles with PD-1 Membrane Proteins for the Cytosolic Delivery of Cargos

Extracellular vesicles (EVs) are cell-derived lipid membrane capsules that can deliver functional molecules, such as nucleic acids, to target cells. Currently, the application of EVs is limited because of the difficulty of loading cargo into EVs. We constructed hybrid EVs by the fusion of liposomes and insect cell-derived EVs expressing recombinant programmed cell death 1 (PD-1) protein and baculoviral fusogenic glycoprotein gp64, and evaluated delivery of the model cargo molecule, Texas Red-labeled dextran (TR-Dex), into the cytosol. When PD-1 hybrid EVs were added to HeLa cells, the intracellular uptake of the hybrid EVs was increased compared with hybrid EVs without PD-1. After cellular uptake, the PD-1 hybrid EVs were shown to be localized to late endosomes or lysosomes. The results of fluorescence resonance energy transfer (FRET) indicated that membrane fusion between the hybrid EVs and organelles had occurred in the acidic environment of the organelles. When TR-Dex-loaded liposomes were fused with the PD-1 EVs, confocal laser scanning microscopy indicated that TR-Dex was distributed throughout the cells, which suggested that endosomal escape of TR-Dex, through membrane fusion between the hybrid EVs and acidic organelles, had occurred. These engineered PD-1 hybrid EVs have potential as delivery carriers for biopharmaceuticals.

Development and single-particle analysis of hybrid extracellular vesicles fused with liposomes using viral fusogenic proteins

Extracellular vesicles (EVs) have potential biomedical applications, particularly as a means of transport for therapeutic agents. There is a need for rapid and efficient EV‐liposome membrane fusion that maintains the integrity of hybrid EVs. We recently described Sf9 insect cell‐derived EVs on which functional membrane proteins were presented using a baculovirus‐expression system. Here, we developed hybrid EVs by membrane fusion of small liposomes and EVs equipped with baculoviral fusogenic proteins. Single‐particle analysis of EV‐liposome complexes revealed controlled introduction of liposome components into EVs. Our findings and methodology will support further applications of EV engineering in biomedicine.

Development of Artificial Cell Models Using Microfluidic Technology and Synthetic Biology

Giant lipid vesicles or liposomes are primarily composed of phospholipids and form a lipid bilayer structurally similar to that of the cell membrane. These vesicles, like living cells, are 5-100 μm in diameter and can be easily observed using an optical microscope. As their biophysical and biochemical properties are similar to those of the cell membrane, they serve as model cell membranes for the investigation of the biophysical or biochemical properties of the lipid bilayer, as well as its dynamics and structure. Investigation of membrane protein functions and enzyme reactions has revealed the presence of soluble or membrane proteins integrated in the giant lipid vesicles. Recent developments in microfluidic technologies and synthetic biology have enabled the development of well-defined artificial cell models with complex reactions based on the giant lipid vesicles. In this review, using microfluidics, the formations of giant lipid vesicles with asymmetric lipid membranes or complex structures have been described. Subsequently, the roles of these biomaterials in the creation of artificial cell models including nanopores, ion channels, and other membrane and soluble proteins have been discussed. Finally, the complex biological functions of giant lipid vesicles reconstituted with various types of biomolecules has been communicated. These complex artificial cell models contribute to the production of minimal cells or protocells for generating valuable or rare biomolecules and communicating between living cells and artificial cell models.

Preparation of engineered extracellular vesicles with full-length functional PD-1 membrane proteins by baculovirus expression system

Extracellular vesicles (EVs) facilitate intercellular communication by transporting functional molecules. The modification of EVs for clinical use as drug delivery systems is of considerable interest because of their biocompatibility and molecular transport ability. Programmed cell death ligand 1 (PD-L1) is an effective target molecule for drug delivery to cancer tissues and binds the single-transmembrane protein, Programmed cell death protein 1 (PD-1), an immune checkpoint that guards against autoimmunity. In this study, EVs were modified in a new surface engineering strategy to incorporate recombinant full-length functional PD-1 using a baculovirus system and newly designed PD-1 mutant with higher PD-L1 affinity. The insect cell line Spodoptera frugiperda 9 was infected with recombinant baculoviruses incorporating the PD-1 mutant gene to express the target membrane proteins. To ensure an effective insertion into the membrane, the native signal peptide of PD-1 was also replaced with that of the baculovirus envelope glycoprotein. Engineered EVs expressing the high-affinity PD-1 mutants (PD-1 EVs) were then isolated and characterized. Immunostaining and confocal laser scanning microscopy results confirmed the presence of full-length functional PD-1 mutants expressed by viral infection on both infected Spodoptera frugiperda 9 cell membrane surfaces and released EV membranes. Furthermore, the signal peptide substitution drastically increased the binding between PD-1 EVs and PD-L1. PD-1 EVs effectively bound PD-L1 and PD-L1-expressing cancer cells, showing potential as a candidate in new therapy approaches targeting PD-L1 EVs.

Baculovirus Entry and Egress from Insect Cells

Baculoviruses are large DNA viruses of insects that are highly pathogenic in many hosts. In the infection cycle, baculoviruses produce two types of virions. These virion phenotypes are physically and functionally distinct, and each serves a critical role in the biology of the virus. One phenotype, the occlusion-derived virus (ODV), is occluded within a crystallized protein that facilitates oral infection of the host. A large complex of at least nine ODV envelope proteins called per os infectivity factors are critically important for ODV infection of insect midgut epithelial cells. Viral egress from midgut cells is by budding to produce a second virus phenotype, the budded virus (BV). BV binds, enters, and replicates in most other tissues of the host insect. Cell recognition and entry by BV are mediated by a single major envelope glycoprotein: GP64 in some baculoviruses and F in others. Entry and egress by the two virion phenotypes occur by dramatically different mechanisms and reflect a life cycle in which ODV is specifically adapted for oral infection while BV mediates dissemination of the infection within the animal.

Well-Controlled Cell-Trapping Systems for Investigating Heterogeneous Cell-Cell Interactions

Microfluidic systems have been developed for patterning single cells to study cell-cell interactions. However, patterning multiple types of cells to understand heterogeneous cell-cell interactions remains difficult. Here, it is aimed to develop a cell-trapping device to assemble multiple types of cells in the well-controlled order and morphology. This device mainly comprises a parylene sheet for assembling cells and a microcomb for controlling the cell-trapping area. The cell-trapping area is controlled by moving the parylene sheet on an SU-8 microcomb using tweezers. Gentle downward flow is used as a driving force for the cell-trapping. The assembly of cells on a parylene sheet with round and line-shaped apertures is demonstrated. The cell-cell contacts of the trapped cells are then investigated by direct cell-cell transfer of calcein via connexin nanopores. Finally, using the device with a system for controlling the cell-trapping area, three different types of cells in the well-controlled order are assembled. The correct cell order rate obtained using the device is 27.9%, which is higher than that obtained without the sliding parylene system (0.74%). Furthermore, the occurrence of cell-cell contact between the three cell types assembled is verified. This cell-patterning device will be a useful tool for investigating heterogeneous cell-cell interactions.

Membrane fusion between baculovirus budded virus-enveloped particles and giant liposomes generated using a droplet-transfer method for the incorporation of recombinant membrane proteins

Giant proteoliposomes are generally useful as artificial cell membranes in biochemical and biophysical studies, and various procedures for their preparation have been reported. We present here a novel preparation technique that involves the combination of i) cell-sized lipid vesicles (giant unilamellar vesicles, GUVs) that are generated using the droplet-transfer method, where lipid monolayer-coated water-in-oil microemulsion droplets interact with oil/water interfaces to form enclosed bilayer vesicles, and ii) budded viruses (BVs) of baculovirus (Autographa californica nucleopolyhedrovirus) that express recombinant transmembrane proteins on their envelopes. GP64, a fusogenic glycoprotein on viral envelopes, is activated by weak acids and is thought to cause membrane fusion with liposomes. Using confocal laser scanning microscopy (CLSM), we observed that the single giant liposomes fused with octadecyl rhodamine B chloride (R18)-labeled wild-type BV envelopes with moderate leakage of entrapped soluble compounds (calcein), and the fusion profile depended on the pH of the exterior solution: membrane fusion occurred at pH ∼4-5. We further demonstrated that recombinant transmembrane proteins, a red fluorescent protein (RFP)-tagged GPCR (corticotropin-releasing hormone receptor 1, CRHR1) and envelope protein GP64 could be partly incorporated into membranes of the individual giant liposomes with a reduction of the pH value, though there were also some immobile fluorescent spots observed on their circumferences. This combination may be useful for preparing giant proteoliposomes containing the desired membranes and inner phases.

Giant liposome formation toward the synthesis of well-defined artificial cells

This review focuses on microfluidic technologies for giant liposome formations which emulate environments of biological cells.

The method used to culture host cells (Sf9 cells) can affect the qualities of baculovirus budding particles expressing recombinant proteins

Budded virus (BV) particles of baculovirus (Autographa californica nucleopolyhedrovirus, AcNPV) are harvested from the supernatant of liquid culture of Sf9 host cells by ultracentrifugation. Using polyacrylamide gel electrophoresis, Western blot and transmission electron microscopy (TEM) of BV samples fractionated closely by sucrose density gradient centrifugation, we observed that BVs exhibited different qualities depending on whether they had been harvested from the supernatant from a standing (static), shaking (suspension), or standing/shaking (pre-/post-infection) culture of Sf9 cells. The amount of BV protein apparently increased in the order of standing, standing/shaking, and shaking procedure, and the yield of intact particles showed an opposite trend. TEM observation clearly showed that appropriate fractions of the standing and standing/shaking cultures contained more intact BV particles than those from the shaking culture. These results suggest that the qualities of recombinant BV particles may be related to the culture conditions of the host cells.

A model for targeting colon carcinoma cells using single-chain variable fragments anchored on virus-like particles via glycosyl phosphatidylinositol anchor

PURPOSE

VLPs displaying tumor targeting single-chain variable fragments (VLP-rscFvs) which targets tumor-associated glycoprotein-72 (TAG-72) marker protein have a potential for immunotherapy against colon carcinoma tumors. In this study, scFvs anchored on VLPs using glycosylphosphatidylinositol (GPI) were prepared to target colon carcinoma spheroids in vitro.

METHODS

VLPs-rscFvs were produced by co-injecting two types of Bombyx mori nucleopolyhedrovirus (BmNPV) bacmids, encoding RSV-gag and rscFvs cDNA into silkworm larvae. Large unilamellar vesicles (LUVs) of 100 nm in diameter were made using 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and packaged with Sulforhodamine B (SRB). LUV-SRB was used to associate with VLP-rscFvs assisted by GP64 present on VLP-rscFvs to produce VLP-rscFv associated SRB (VLP-rscFvs-SRB) at pH 7.5.

RESULTS

The antigenicity of the purified VLPs-rScFvs was confirmed by enzyme-linked immunosorbent assay (ELISA) using TAG-72 as antigen. LUV-SRB made of DOPC was used to associate with 100 μg of VLP-rscFvs to produce VLP-rscFv-SRB. Specific delivery and penetration of SRB up to 100 μm into the spheroids shows the potential of the new model.

CONCLUSIONS

The current study demonstrated the display, expression and purification of VLP-rscFvs efficiently. As a test model VLP-rscFv-SRB were prepared which can be used for immunotherapy. rscFvs provide the specificity needed to target tumors and VLPs serve as carrier transporting the dye to target.

Incorporation of adenylate cyclase into membranes of giant liposomes using membrane fusion with recombinant baculovirus-budded virus particles

Recombinant transmembrane adenylate cyclase (AC) was incorporated into membranes of giant liposomes using membrane fusion between liposomes and baculovirus-budded virus (BV). AC genes were constructed into transfer vectors in a form fused with fluorescent protein or polyhistidine at the C-terminus. The recombinant BVs were collected by ultracentrifugation and AC expression was verified using western blotting. The BVs and giant liposomes generated using gentle hydration were fused under acidic conditions; the incorporation of AC into giant liposomes was demonstrated by confocal laser scanning microscopy through the emission of fluorescence from their membranes. The AC-expressing BVs were also fused with liposomes containing the substrate (ATP) with/without a specific inhibitor (SQ 22536). An enzyme immunoassay on extracts of the sample demonstrated that cAMP was produced inside the liposomes. This procedure facilitates direct introduction of large transmembrane proteins into artificial membranes without solubilization.

Cell-free preparation of functional and triggerable giant proteoliposomes

Heat, we leak: We express a membrane protein outside well-defined giant liposomes obtained by gravity-transferred sucrose-in-oil droplets into a cell-free, reconstituted expression system. We show that the presence of the liposome is necessary during expression for efficient protein insertion into the membrane and that temperature can trigger the resulting membrane function.

Functional analysis of the Autographa californica multiple nucleopolyhedrovirus GP64 terminal fusion loops and interactions with membranes

The Autographa californica multiple nucleopolyhedrovirus (AcMNPV) glycoprotein GP64 is the major envelope protein of the budded virus (BV). GP64 is a class III fusion protein that mediates BV attachment to the cell surface and low-pH-triggered membrane fusion between the BV envelope and the endosome membrane during entry. Class III fusion proteins contain terminal looped structures that are believed to interact with membranes. To examine the functions of 3 loops found at the apex of the GP64 postfusion structure, we generated 2-alanine substitutions that scanned the two so-called fusion loops (loop 1 and loop 2) plus an adjacent loop structure (loop 3) that is closely attached to loop 2 and is also found at the apex of the GP64 postfusion structure. We identified essential residues from Y75 to T86 (loop 1) and N149 to H156 (loop 2) that are required for fusion activity, but no essential residues in loop 3. Further analysis revealed that critical fusion loop residues fall within two groups that are associated with either membrane merger (hemifusion) or fusion pore expansion. We next examined the interactions of soluble GP64 proteins and BV with membranes composed of various phospholipids. BV interacted directly with small unilamellar vesicles (SUVs) comprised of phospholipids phosphatidylcholine and phosphatidic acid (PC/PA) or phosphatidylcholine and phosphatidylserine (PC/PS) under neutral and acidic pH. We also examined the interactions of soluble GP64 constructs containing substitutions of the most hydrophobic residues within each of the two fusion loops. We found that a 2-residue substitution in either single loop (loop 1 [positions 81 and 82] or loop 2 [positions 153 and 154]) was not sufficient to substantially reduce the GP64-liposome interaction, but the same substitutions in both fusion loops severely reduced the GP64-liposome association at neutral pH. These results suggest that critical hydrophobic residues in both fusion loops may be involved in the interaction of GP64 with host cellular membranes and direct GP64-membrane interactions may represent a receptor-binding step prior to a low-pH-triggered conformational change.