Uptake and function of membrane-destabilizing cationic nanogels for intracellular drug delivery

Design and applications of polymer-like peptides in biomedical nanogels

INTRODUCTION

Polymer nanogels are among the most promising nanoplatforms for use in biomedical applications. The substantial interest for these drug carriers is to enhance the transportation of bioactive substances, reduce the side effects, and achieve optimal action on the curative sites by targeting delivery and triggering the release of the drugs in a controlled and continuous mode.

AREA COVERED

The review discusses the opportunities, applications, and challenges of synthetic polypeptide nanogels in biomedicine, with an emphasis on the recent progress in cancer therapy. It is evidenced by the development of polypeptide nanogels for better controlled drug delivery and release, in complex in vivo microenvironments in biomedical applications.

EXPERT OPINION

Polypeptide nanogels can be developed by choosing the amino acids from the peptide structure that are suitable for the type of application. Using a stimulus - sensitive peptide nanogel, it is possible to obtain the appropriate transport and release of the drug, as well as to achieve desirable therapeutic effects, including safety, specificity, and efficiency. The final system represents an innovative way for local and sustained drug delivery at a specific site of the body.

Chlorpromazine-Polypyrrole Drug Delivery System Tailored for Neurological Application

Nowadays, drug delivery systems (DDSs) are gaining more and more attention. Conducting polymers (CPs) are efficiently used for DDS construction as such systems can be used in therapy. In this research, a well-known CP, polypyrrole (PPy), was synthesized in the presence of the polysaccharide heparin (HEP) and chlorpromazine (CPZ) using sodium dodecyl sulfate (SDS) as electrolyte on a steel substrate. The obtained results demonstrate the successful incorporation of CPZ and HEP into the polymer matrix, with the deposited films maintaining stable electrochemical parameters across multiple doping/dedoping cycles. Surface roughness, estimated via AFM analysis, revealed a correlation with layer thickness-decreasing for thinner layers and increasing for thicker ones. Moreover, SEM images revealed a change in the morphology of PPy films when PPy is electropolymerized in the presence of CPZ and HEP, while FTIR confirmed the presence of CPZ and HEP within PPy. Due to its lower molecular mass compared to HEP, CPZ was readily integrated into the thin polymer matrix during deposition, with diffusion being unimpeded, as opposed to films with greater thickness. Finally, the resulting system exhibited the ability to release CPZ, enabling a dosing range of 10 mg to 20 mg per day, effectively covering the therapeutic concentration range.

Nanogels: Smart tools to enlarge the therapeutic window of gene therapy

Gene therapy can potentially treat a great number of diseases, from cancer to rare genetic disorders. Very recently, the development and emergency approval of nucleic acid-based COVID-19 vaccines confirmed its strength and versatility. However, gene therapy encounters limitations due to the lack of suitable carriers to vectorize therapeutic genetic material inside target cells. Nanogels are highly hydrated nano-size crosslinked polymeric networks that have been used in many biomedical applications, from drug delivery to tissue engineering and diagnostics. Due to their easy production, tunability, and swelling properties they have called the attention as promising vectors for gene delivery. In this review, nanogels are discussed as vectors for nucleic acid delivery aiming to enlarge gene therapy's therapeutic window. Recent works highlighting the optimization of inherent transfection efficiency and biocompatibility are reviewed here. The importance of the monomer choice, along with the internal structure, surface decoration, and responsive features are outlined for the different transfection modalities. The possible sources of toxicological endpoints in nanogels are analyzed, and the strategies to limit them are compared. Finally, perspectives are discussed to identify the remining challenges for the nanogels before their translation to the market as transfection agents.

siRNA Delivery from Cationic Nanocarriers Prepared by Diffusion-assisted Loading in the Presence and Absence of Electrostatic Interactions

In this study, we use modified cationic nanocarriers as vehicles for the intracellular delivery of therapeutic siRNA. After developing nanocarrier formulations with appropriate pKa, size, swellability, and cytocompatibility, we investigated the importance of siRNA loading methods by studying the impact of the pH and time over which siRNA is loaded into the nanocarriers. We concentrate on diffusion-based loading in the presence and absence of electrostatic interactions. siRNA release kinetics were studied using samples prepared from nanocarriers loaded by both mechanisms. In addition, siRNA delivery was evaluated for two formulations. While previous studies were conducted with samples prepared by siRNA loading at low pH values, this research provides evidence that loading conditions of siRNA affect the release behavior. This study concludes that this concept could prove advantageous for eliciting prolonged intracellular release of nucleic acids and negatively charged molecules, effectively decreasing dose frequency and contributing to more effective therapies and improved patient outcomes. In addition, our findings could be leveraged for enhanced control over siRNA release kinetics, providing novel methods for the continued optimization of cationic nanoparticles in a wide array of RNA interference-based applications.

Versatile Tissue-Injectable Hydrogels with Extended Hydrolytic Release of Bioactive Protein Therapeutics

Hydrogels generally have broad utilization in healthcare due to their tunable structures, high water content, and inherent biocompatibility. FDA-approved applications of hydrogels include spinal cord regeneration, skin fillers, and local therapeutic delivery. Drawbacks exist in the clinical hydrogel space, largely pertaining to inconsistent therapeutic exposure, short-lived release windows, and difficulties inserting the polymer into tissue. In this study, we engineered injectable, biocompatible hydrogels that function as a local protein therapeutic depot with a high degree of user-customizability. We showcase a PEG-based hydrogel functionalized with bioorthogonal strain-promoted azide-alkyne cycloaddition (SPAAC) handles for its polymerization and functionalization with a variety of payloads. Small-molecule and protein cargos, including chemokines and antibodies, were site-specifically modified with hydrolysable "azidoesters" of varying hydrophobicity via direct chemical conjugation or sortase-mediated transpeptidation. These hydrolysable esters afforded extended release of payloads linked to our hydrogels beyond diffusion; with timescales spanning days to months dependent on ester hydrophobicity. Injected hydrogels polymerize in situ and remain in tissue over extended periods of time. Hydrogel-delivered protein payloads elicit biological activity after being modified with SPAAC-compatible linkers, as demonstrated by the successful recruitment of murine T-cells to a mouse melanoma model by hydrolytically released murine CXCL10. These results highlight a highly versatile, customizable hydrogel-based delivery system for local delivery of protein therapeutics with payload release profiles appropriate for a variety of clinical needs.

Endosomal Escape of Bioactives Deployed via Nanocarriers: Insights Into the Design of Polymeric Micelles

Cytoplasmic delivery of bioactives requires the use of strategies such as active transport, electroporation, or the use of nanocarriers such as polymeric nanoparticles, liposomes, micelles, and dendrimers. It is essential to deliver bioactive molecules in the cytoplasm to achieve targeted effects by enabling organelle targeting. One of the biggest bottlenecks in the successful cytoplasmic delivery of bioactives through nanocarriers is their sequestration in the endosomes that leads to the degradation of drugs by progressing to lysosomes. In this review, we discussed mechanisms by which nanocarriers are endocytosed, the mechanisms of endosomal escape, and more importantly, the strategies that can be and have been employed for their escape from the endosomes are summarized. Like other nanocarriers, polymeric micelles can be designed for endosomal escape, however, a careful control is needed in their design to balance between the possible toxicity and endosomal escape efficiency. Keeping this in view, polyion complex micelles, and polymers that have the ability to escape the endosome, are fully discussed. Finally, we provided some perspectives for designing the polymeric micelles for efficient cytoplasmic delivery of bioactive agents through endosomal escape.

Multifunctional Polymeric Nanogels for Biomedical Applications

Currently, research in nanoparticles as a drug delivery system has broadened to include their use as a delivery system for bioactive substances and a diagnostic or theranostic system. Nanogels, nanoparticles containing a high amount of water, have gained attention due to their advantages of colloidal stability, core-shell structure, and adjustable structural components. These advantages provide the potential to design and fabricate multifunctional nanosystems for various biomedical applications. Modified or functionalized polymers and some metals are components that markedly enhance the features of the nanogels, such as tunable amphiphilicity, biocompatibility, stimuli-responsiveness, or sensing moieties, leading to specificity, stability, and tracking abilities. Here, we review the diverse designs of core-shell structure nanogels along with studies on the fabrication and demonstration of the responsiveness of nanogels to different stimuli, temperature, pH, reductive environment, or radiation. Furthermore, additional biomedical applications are presented to illustrate the versatility of the nanogels.

Purification and erythrocyte-membrane perturbing activity of a ketose-specific lectin from Moringa oleifera seeds

This study purified a hemagglutinating protein (MoL) from Moringa oleifera seed, and investigated its hemolytic activity. Molecular weight and stability of MoL were also determined. Modification of some amino acid residues was carried out and the effect on MoL hemagglutinating activity determined. Other investigated parameters are the effects of temperature, concentration, incubation period, pH, and sugars on the protein's hemagglutinating and hemolytic activities. The native and subunit molecular weights were estimated as 30 and 27.5 kDa respectively. Hemagglutinating activity of MoL was slightly inhibited by fructose and sucrose, stable at temperature up to 90°C and within pH range of 2-4. Modification of tryptophan and arginine residues resulted in partial loss of hemagglutinating activity. The hemolytic activity of MoL was concentration, temperature, pH, and time-dependent. The study concluded that MoL showed hemolytic (membrane-perturbing) activity in moderate acidic conditions. This suggests its potential exploitation in improved intracellular delivery of bioactive compounds.

Hydrogel-Induced Cell Membrane Disruptions Enable Direct Cytosolic Delivery of Membrane-Impermeable Cargo

Intracellular delivery of membrane-impermeable cargo offers unique opportunities for biological research and the development of cell-based therapies. Despite the breadth of available intracellular delivery tools, existing protocols are often suboptimal and alternative approaches that merge delivery efficiency with both biocompatibility, as well as applicability, remain highly sought after. Here, a comprehensive platform is presented that exploits the unique property of cationic hydrogel nanoparticles to transiently disrupt the plasma membrane of cells, allowing direct cytosolic delivery of uncomplexed membrane-impermeable cargo. Using this platform, which is termed Hydrogel-enabled nanoPoration or HyPore, the delivery of fluorescein isothiocyanate (FITC)-dextran macromolecules in various cancer cell lines and primary bovine corneal epithelial cells is convincingly demonstrated. Of note, HyPore demonstrates efficient FITC-dextran delivery in primary human T cells, outperforming state-of-the-art electroporation-mediated delivery. Moreover, the HyPore platform enables cytosolic delivery of functional proteins, including a histone-binding nanobody as well as the enzymes granzyme A and Cre-recombinase. Finally, HyPore-mediated delivery of the MRI contrast agent gadobutrol in primary human T cells significantly improves their T₁ -weighted MRI signal intensities compared to electroporation. Taken together, HyPore is proposed as a straightforward, highly versatile, and cost-effective technique for high-throughput, ex vivo manipulation of primary cells and cell lines.

Review on the advancements of magnetic gels: towards multifunctional magnetic liposome-hydrogel composites for biomedical applications

Magnetic gels have been gaining great attention in nanomedicine, as they combine features of hydrogels and magnetic nanoparticles into a single system. The incorporation of liposomes in magnetic gels further leads to a more robust multifunctional system enabling more functions and spatiotemporal control required for biomedical applications, which includes on-demand drug release. In this review, magnetic gels components are initially introduced, as well as an overview of advancements on the development, tuneability, manipulation and application of these materials. After a discussion of the advantages of combining hydrogels with liposomes, the properties, fabrication strategies and applications of magnetic liposome-hydrogel composites (magnetic lipogels or magnetolipogels) are reviewed. Overall, the progress of magnetic gels towards smart multifunctional materials are emphasized, considering the contributions for future developments.

Peptide conjugation enhances the cellular co-localization, but not endosomal escape, of modular poly(acrylamide-co-methacrylic acid) nanogels

Nanoparticles must recognize, adhere to, and/or traverse multiple barriers in sequence to achieve cytosolic drug delivery. New nanoparticles often exhibit a unique ability to cross a single barrier (i.e. the vasculature, cell membrane, or endosomal compartment), but fail to deliver an adequate dose to intracellular sites of action because they cannot traverse other biological barriers for which they were not optimized. Here, we developed poly(acrylamide-co-methacrylic acid) nanogels that were modified in a modular manner with bioactive peptides. This nanogel does not recognize target cells or disrupt endosomal vesicles in its unmodified state, but can incorporate peptides with molecular recognition or environmentally responsive properties. Nanogels were modified with up to 15 wt% peptide without significantly altering their size, surface charge, or stability in aqueous buffer. Nanogels modified with a colon cancer-targeting oligopeptide exhibited up to a 324% enhancement in co-localization with SW-48 colon cancer cells in vitro, while influencing nanogel uptake by fibroblasts and macrophages to a lesser extent. Nanogels modified with an endosome disrupting peptide failed to retain its native endosomolytic activity, when coupled either individually or in combination with the targeting peptide. Our results offer a proof-of-concept for modifying synthetic nanogels with a combination of peptides that address barriers to cytosolic delivery individually and in tandem. Our data further motivate the need to identify endosome disrupting moieties which retain their activity within poly(acidic) networks.

The Role of Formamidine Groups in Dextran Based Nonviral Vectors for Gene Delivery on Their Physicochemical and Biological Characteristics

Dextran-formamidine esters (dextran-N-[(dimethylamino)methylene]-β-alanine ester) with different degrees of substitution (0.45-0.92) are synthesized in an one-pot reaction. Dextran (Mw 60 000 g mol^-1 ) is allowed to react with unprotected beta-alanine and iminium chloride and investigated regarding the potential as gene delivery system for the transfer of plasmid DNA. With degrees of substitution ≥ 0.63 improved DNA binding with formation of enzymatically stable complexes of about 130-160 nm with negative surface charges are obtained. These physicochemical characteristics correlated with increasing transfection rates in CHO-K1 cells determined by a luciferase reporter gene assay in dependency of the number of formamidine residues, N/P ratios and amount of DNA. The role of the number of formamidine groups is also highlighted by in vitro cyto- and hemotoxicity tests under the chosen conditions. These results indicate that dextran-formamidine esters are a very promising material for the safe and efficient gene delivery.

QCM-D assay for quantifying the swelling, biodegradation, and protein adsorption of intelligent nanogels

Environmentally responsive nanomaterials have been developed for drug delivery applications, in an effort to target and accumulate therapeutic agents at sites of disease. Within a biological system, these nanomaterials will experience diverse conditions which encompass a variety of solute identities and concentrations. In this study, we developed a new quartz crystal microbalance with dissipation (QCM-D) assay, which enabled the quantitative analysis of nanogel swelling, protein adsorption, and biodegradation in a single experiment. As a proof of concept, we employed this assay to characterize non-degradable and biodegradable poly(acrylamide-co-methacrylic acid) nanogels. We compared the QCM-D results to those obtained by dynamic light scattering to highlight the advantages and limitations of each method. We detailed our protocol development and practical recommendations, and hope that this study will serve as a guide for others to design application-specific QCM-D assays within the nanomedicine domain.

Hydrogels in the clinic

Injectable hydrogels are one of the most widely investigated and versatile technologies for drug delivery and tissue engineering applications. Hydrogels' versatility arises from their tunable structure, which has been enabled by considerable advances in fields such as materials engineering, polymer science, and chemistry. Advances in these fields continue to lead to invention of new polymers, new approaches to crosslink polymers, new strategies to fabricate hydrogels, and new applications arising from hydrogels for improving healthcare. Various hydrogel technologies have received regulatory approval for healthcare applications ranging from cancer treatment to aesthetic corrections to spinal fusion. Beyond these applications, hydrogels are being studied in clinical settings for tissue regeneration, incontinence, and other applications. Here, we analyze the current clinical landscape of injectable hydrogel technologies, including hydrogels that have been clinically approved or are currently being investigated in clinical settings. We summarize our analysis to highlight key clinical areas that hydrogels have found sustained success in and further discuss challenges that may limit their future clinical translation.

Smart Nanoformulation Based on Stimuli-Responsive Nanogels and Curcumin: Promising Therapy against Colon Cancer

Curcumin (CUR) has gained much attention for its widely reported anticancer effect; however, its clinical use is restricted due to its low water solubility and, consequently, its poor bioavailability. Here, we report on the use of a nanoformulation of CUR with cationic nanogels for colon cancer therapy. Cationic stimuli-sensitive nanogels were prepared using a scale-up polymerization methodology based on surfactant-free emulsion polymerization of N,N'-diethylaminoethyl methacrylate (DEAEM) and poly(ethyleneglycol) methacrylate (PEGMA). The obtained nanogels showed a homogeneous size distribution (from 51 to 162 nm, polydispersity index (PDI) < 0.138) and exhibited a spherical form and core-shell morphology as confirmed by dynamic light scattering and electron microscopy, respectively. Nanogels were responsive to and degradable by variations of pH, temperature, or the redox environment, depending on the cross-linker used in the synthesis. Nanogels cross-linked with bis(acryloyl)cystamine incubated in a buffer (pH 7.4) containing 3 mM glutathione degraded in 60 min, while nanogels cross-linked with a divinylacetal cross-linker degraded in 10 min (pH ≤ 6). Nanoformulations of nanogels with CUR were stable as tested up to 30 days at physiological conditions. In vitro studies of the human colon cancer cell line (HCT-116) showed a synergistic effect of CUR and the degradable nanogels. Further, in vivo acute cytotoxicity tests of empty nanogels in mice demonstrate their potential as CUR nanocarriers for colon-anticancer therapies.

Selective Control of Cell Activity with Hydrophilic Polymer-Covered Cationic Nanoparticles

Cationic polymers exhibit high cytotoxicity via strong interaction with cell membranes. To reduce cell membrane damage, a hydrophilic polymer is introduced to the cationic nanoparticle surface. The hydrophilic polymer coating of cationic nanoparticles resulted in a nearly neutral nanoparticle. These particles are applied to mouse fibroblast (3T3) and human cervical adenocarcinoma (Hela) cells. Interestingly, nanoparticles with a long cationic segment decrease cell activity regardless of cell type, while those with a short segment only affect 3T3 cell activity at lower concentrations less than 500 µg mL^-1 . Most nanoparticles are located inside 3T3 cells but on the cell membrane of Hela cells. The short cationic nanoparticle shows negligible cell membrane damage despite its high accumulation on Hela cell membranes. Cell activity changed by hydrophilic polymer-coated cationic nanoparticles is caused by incorporated nanoparticle accumulation in the cells, not cell membrane damage. To suppress the cytotoxicity from the cationic polymer, cationic nanoparticle needs to completely cover with hydrophilic polymer so as not to exhibit the cationic effect and applies to cell with low concentrations to reduce the nonselective cytotoxicity from the cationic polymer.

Optimization of Cationic Nanogel PEGylation to Achieve Mammalian Cytocompatibility with Limited Loss of Gram-Negative Bactericidal Activity

Tuning the composition of antimicrobial nanogels can significantly alter both nanogel cytotoxicity and antibacterial activity. This project investigated the extent to which PEGylation of cationic, hydrophobic nanogels altered their cytotoxicity and bactericidal activity. These biodegradable, cationic nanogels were synthesized by activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) emulsion polymerization with up to 13.9 wt % PEG (MW = 2000) MA, as verified by ¹H NMR. Nanogel bactericidal activity was assessed against Gram-negative E. coli and P. aeruginosa and Gram-positive S. mutans and S. aureus by measuring membrane lysis with a LIVE/DEAD assay. E. coli and S. mutans viability was further validated by measuring metabolic activity with a PrestoBlue assay and imaging bacteria stained with a LIVE/DEAD probe. All tested nanogels decreased the membrane integrity (0.5 mg/mL dose) for Gram-negative E. coli and P. aeruginosa, irrespective of the extent of PEGylation. PEGylation (13.9 wt %) increased the cytocompatibility of cationic nanogels toward RAW 264.7 murine macrophages and L929 murine fibroblasts by over 100-fold, relative to control nanogels. PEGylation (42.8 wt %) reduced nanogel uptake by 43% for macrophages and 63% for fibroblasts. Therefore, PEGylation reduced nanogel toxicity to mammalian cells without significantly compromising their bactericidal activity. These results facilitate future nanogel design for perturbing the growth of Gram-negative bacteria.

Synthetic networks with tunable responsiveness, biodegradation, and molecular recognition for precision medicine applications

Formulations and devices for precision medicine applications must be tunable and multiresponsive to treat heterogeneous patient populations in a calibrated and individual manner. We engineered modular poly(acrylamide-co-methacrylic acid) copolymers, cross-linked into multiresponsive nanogels with either a nondegradable or degradable disulfide cross-linker, that were customized via orthogonal chemistries to target biomarkers of an individual patient's disease or deliver multiple therapeutic modalities. Upon modification with functional small molecules, peptides, or proteins, these nanomaterials delivered methylene blue with environmental responsiveness, transduced visible light for photothermal therapy, acted as a functional enzyme, or promoted uptake by cells. In addition to quantifying the nanogels' composition, physicochemical characteristics, and cytotoxicity, we used a QCM-D method for characterizing nanomaterial degradation and a high-throughput assay for cellular uptake. In conclusion, we generated a tunable nanogel composition for precision medicine applications and new quantitative protocols for assessing the bioactivity of similar platforms.

Modulated Protein Delivery to Engineer Tissue Repair

IMPACT STATEMENT

Achieving targeted protein delivery to injured tissues is a core focus of the field of tissue engineering and has enormous clinical potential. This article highlights significant advances made in biomaterial-based protein delivery strategies over the last 25 years and how they will influence research in the next 25 years. These advances will enable protein release rates to be tuned with increased flexibility to deliberately address the challenges of the dynamic injury environment and ultimately lead to better solutions for patients.

Cytoplasmic delivery of functional siRNA using pH-Responsive nanoscale hydrogels

The progress of short interfering RNA (siRNA) technologies has unlocked the development of novel alternatives for the treatment of a myriad of diseases, including viral infections, autoimmune disorders, or cancer. Nevertheless, the clinical use of these therapies faces significant challenges, mainly overcoming the charged and large nature of these molecules to effectively enter the cell. In this work, we developed a cationic polymer nanoparticle system that is able to load siRNA due to electrostatic interactions. The pH-responsiveness and membrane-disrupting ability of these carriers make them suitable intracellular delivery vehicles. In the work presented herein we synthesized, characterized, and evaluated the properties of nanoparticles based on 2-diethylaminoethyl methacrylate and tert-butyl methacrylate copolymers. A disulfide crosslinker was incorporated in the nanogels to enable the degradation of the nanoparticles in reductive environments, showing no significant changes on their physicochemical properties. The capability of the developed nanogels to be internalized, deliver siRNA, and induce gene knockdown were demonstrated using a human epithelial colorectal adenocarcinoma cell line. Overall, these findings suggest that this platform exhibits desirable characteristics as a potential siRNA-delivery platform.