Influence of Cleavage Site on Global Folding of an RNA-Cleaving DNAzyme

Characterization of a DNA-hydrolyzing DNAzyme for generation of PCR strands of unequal length

I-R3 DNAzyme is a small, highly active catalytic DNA for DNA hydrolysis. In here, we designed two cis-structure DNAzymes (I-R3N and I-R3S) based on the different locates of the joint linker between I-R3 and its substrate. Data demonstrated that both DNAzymes were highly dependent on Zn²⁺, and worked at a narrow range around pH 7.0. They exhibited strong anti-interference with Mg²⁺ and Ca²⁺, but inhibited by Na⁺ and K⁺. Moreover, single and multiple-site mutations were generated within the catalytic core to carry out a comprehensive mutational study of I-R3 motif, in which most nucleotides were highly conserved and the nucleotides A5, T11 and T8 were identified as the mutational hotspots. Furthermore, an efficient variant A5G was obtained and its reaction condition was optimized. Finally, we constructed A5G to the 3' end of a single-stranded DNA (ssDNA) and applied it for asymmetrical PCR amplification to produce a single and double-stranded DNA mixture, in which A5G within ssDNA can self-cleave to generate a shorter desired ssDNA by denaturing gel separation. This would provide a new non-chemical modification approach for preparation of the expected ssDNA for in vitro selection of DNAzymes.

Insights into DNA catalysis from structural and functional studies of the 8-17 DNAzyme

The review examines functional knowledge gathered over two decades of research on the 8-17 DNAzyme, focusing on three aspects: the structural requirements for catalysis, the role of metal ions and the participation of general acid-base catalysis.

Advanced Selection Methodologies for DNAzymes in Sensing and Healthcare Applications

DNAzymes have been widely explored owing to their excellent catalytic activity in a broad range of applications, notably in sensing and biomedical devices. These newly discovered applications have built high hopes for designing novel catalytic DNAzymes. However, the selection of efficient DNAzymes is a challenging process but one that is of crucial importance. Initially, systemic evolution of ligands by exponential enrichment (SELEX) was a labor-intensive and time-consuming process, but recent advances have accelerated the automated generation of DNAzyme molecules. This review summarizes recent advances in SELEX that improve the affinity and specificity of DNAzymes. The thriving generation of new DNAzymes is expected to open the door to several healthcare applications. Therefore, a significant portion of this review is dedicated to various biological applications of DNAzymes, such as sensing, therapeutics, and nanodevices. In addition, discussion is further extended to the barriers encountered for the real-life application of these DNAzymes to provide a foundation for future research.

Evidence of a General Acid-Base Catalysis Mechanism in the 8-17 DNAzyme

DNAzymes are catalytic DNA molecules that can perform a variety of reactions. Although advances have been made in obtaining DNAzymes via in vitro selection and many of them have been developed into sensors and imaging agents for metal ions, bacteria, and other molecules, the structural features responsible for these enzymatic reactions are still not well understood. Previous studies of the 8-17 DNAzyme have suggested conserved guanines close to the phosphodiester transfer site may play a role in the catalytic reaction. To identify the specific guanine and functional group of the guanine responsible for the reaction, we herein report the effects of replacing G1.1 and G14 (G; p Ka,N1 = 9.4) with analogues with a different p Ka at the N1 position, such as inosine (G14I; p Ka,N1 = 8.7), 2,6-diaminopurine (G14diAP; p Ka,N1 = 5.6), and 2-aminopurine (G14AP; p Ka,N1 = 3.8) on pH-dependent reaction rates. A comparison of the pH dependence of the reaction rates of these DNAzymes demonstrated that G14 in the bulge loop next to the cleavage site, is involved in proton transfer at the catalytic site. In contrast, we did not find any evidence of G1.1 being involved in acid-base catalysis. These results support general acid-base catalysis as a feasible strategy used in DNA catalysis, as in RNA and protein enzymes.

Splitting a DNAzyme enables a Na+-dependent FRET signal from the embedded aptamer

Recently, a few Na⁺-specific RNA-cleaving DNAzymes have been reported, and a Na⁺ aptamer was identified from the NaA43 and Ce13d DNAzymes. These DNAzymes and the embedded aptamer have been used for Na⁺ detection. In this work, we studied the Na⁺-dependent folding of the Ce13d DNAzyme using fluorescence resonance energy transfer (FRET). When a FRET donor and an acceptor were respectively labeled at the ends of the DNAzyme, Na⁺ failed to induce an obvious end-to-end distance change, suggesting a rigid global structure. To relax this rigidity, the Ce13d DNAzyme was systematically split at various sites on both the enzyme and the substrate strands. The Na⁺ binding activity of the split structures was characterized by 2-aminopurine fluorescence, enzymatic activity, Tb³⁺-sensitized luminescence, and DMS footprinting. Among the various constructs, the only one that retained Na⁺ binding was the split at the cleavage site, and this construct was further labeled with two dyes near the split site. This FRET result showed Na⁺-dependent folding with a K_d of 26 mM Na⁺. This study provides important structural information related to Na⁺ binding to this new aptamer, which might also be useful for future work in biosensor design.

Discovery and Biosensing Applications of Diverse RNA-Cleaving DNAzymes

DNA-based enzymes, or DNAzymes, are not known to exist in Nature but can be isolated from random-sequence DNA pools using test tube selection techniques. Since the report of the first DNAzyme in 1994, many catalytic DNA molecules for catalyzing wide-ranging chemical transformations have been isolated and studied. Our laboratory has a keen interest in searching for diverse DNAzymes capable of cleaving RNA-containing substrates, determining their sequence requirements and structural properties, and examining their potential as biosensors. This Account begins with the description of an accidental discovery on the sequence adaptability of a small DNAzyme known as "8-17", when we performed 16 parallel selections to search for DNAzymes that targeted each and every possible dinucleotide junction of RNA for cleavage. DNAzyme 8-17 dominated all the selection pools targeting purine-containing junctions. In-depth sequence analysis revealed that 8-17 could manifest itself in many sequence options defined by the requirement of four absolutely conserved nucleotides. This study also exposed the fact that 8-17 had poor activity toward pyrimidine-pyrimidine junctions. With this information in hand, we proceeded to the discovery of diverse non-8-17 DNAzymes that exhibited robust catalytic activity under physiological conditions. These DNAzymes were found to universally interact with their substrates through two Watson-Crick binding arms and have a catalytic core of varying length and secondary-structure complexity. RNA-cleaving DNAzymes were also isolated to function at acidic conditions (pH 3-5), and these molecules exhibited intriguing pH profiles, with the highest activity precisely matching the pH used for their selection. Interestingly, these DNAzymes appear to use non-Watson-Crick interactions in defining their structures. More recently, we have embarked on the development of ligand-responsive RNA-cleaving fluorogenic DNAzymes that can recognize specific bacterial pathogens, such as Escherichia coli and Clostridium difficile, using a method that does not require a priori identification of a specific biomarker. Instead, the crude extracellular mixture as a whole is used as the target to drive the DNAzyme isolation. High recognition specificity can be achieved with a double-selection approach in which a DNA library is negatively selected against the cellular mixture prepared from unintended bacteria, followed by positive selection against the same mixture derived from a specific species or strain of bacterial pathogen. Finally, we have shown that DNAzymes' compatibility with DNA replication can benefit the design of amplification mechanisms that uniquely link the action of RNA-cleaving DNAzymes to rolling circle amplification, an isothermal DNA amplification technique. These methods are well suited for translating the target-binding and cleavage activity of an analyte-activated RNA-cleaving DNAzyme into the production of massive amounts of DNA amplicons to achieve ultrahigh detection sensitivity. Given the high chemical stability of DNA, our ability to discover catalytic DNA sequences by simultaneously evaluating as many as 10¹⁶ different DNA sequences, the accessibility to diverse RNA-cleaving DNAzymes in a single DNA pool, and the availability of methods for designing simple biosensors that incorporate RNA-cleaving DNAzymes, we believe we are moving closer to employing RNA-cleaving DNAzymes for exciting applications, such as point of care diagnostics or field detection of environmental toxins.

Folding of the silver aptamer in a DNAzyme probed by 2-aminopurine fluorescence

The RNA-cleaving Ag10c DNAzyme was recently isolated via in vitro selection and it can bind two Ag⁺ ions for activity. The Ag10c contains a well-defined Ag⁺ binding aptamer as indicated by DMS footprinting. Since aptamer binding is often accompanied with conformational changes, we herein used 2-aminopurine (2AP) to probe its folding in the presence of Ag⁺. The Ag10c was respectively labeled with 2AP at three different positions, both in the substrate strand and in the enzyme strand, one at a time. Ag⁺-induced folding was observed at the substrate cleavage junction and the A9 position of the enzyme strand, consistent with aptamer binding. The measured K_d at the A9 position was 18 μM Ag⁺ with a Hill coefficient of 2.17, similar to those obtained from the previous cleavage activity based assays. However, labeling a 2AP at the A2 position inhibited the activity and folding. Compared to other metal ions, Ag⁺ has a unique sigmoidal folding profile indicative of multiple silver binding cooperatively. This suggests that Ag⁺ can induce a local folding in the enzyme loop and this folding is important for activity. This study provides important biophysical insights into this new DNAzyme, suggesting the possibility of designing folding-based biosensors for Ag⁺.

Local conformational changes in the 8–17 deoxyribozyme core induced by activating and inactivating divalent metal ions

Placing 2-aminopurine at position 15 of the 8–17 DNAzyme allows the detection of a specific metal-induced conformational change, apparently coupled to the activation of catalysis.

A highly specific sodium aptamer probed by 2-aminopurine for robust Na+ sensing

Sodium is one of the most abundant metals in the environment and in biology, playing critical ecological and physiological roles. Na⁺ is also the most common buffer salt for nucleic acids research, while its specific interaction with DNA has yet to be fully studied. Herein, we probe a highly selective and robust Na⁺ aptamer using 2-aminopurine (2AP), a fluorescent adenine analog. This aptamer has two DNA strands derived from the Ce13d DNAzyme. By introducing a 2AP at the cleavage site of the substrate strand, Na⁺ induces ∼40% fluorescence increase. The signaling is improved by a series of rational mutations, reaching >600% with the C₁₀A₂₀ double mutant. This fluorescence enhancement suggests relaxed base stacking near the 2AP label upon Na⁺ binding. By replacing a non-conserved adenine in the enzyme strand by 2AP, Na⁺-dependent fluorescence quenching is observed, suggesting that the enzyme loop folds into a more compact structure upon Na⁺ binding. The fluorescence changes allow for Na⁺ detection. With an optimized sequence, a detection limit of 0.4 mM Na⁺ is achieved, reaching saturated signal in less than 10 s. The sensor response is insensitive to ionic strength, which is critical for Na⁺ detection.

Probing the effect of minor groove interactions on the catalytic efficiency of DNAzymes 8-17 and 10-23

DNAzymes (Dz) 8-17 and 10-23 are two widely studied and well-characterized RNA-cleaving DNA catalysts. In an effort to further improve the understanding of the fragile interactions and dynamics of the enzymatic mechanism, this study examines the catalytic efficiency of minimally modified DNAzymes. Five single mutants of Dz8-17 and Dz10-23 were prepared by replacing the adenine residues in the corresponding catalytic cores with 3-deazaadenine units. Kinetic assays were used to assess the effect on the catalytic activity and thereby identify the importance of hydrogen bonding that arises from the N3 atoms. The results suggest that modifications at A15 and A15.0 of Dz8-17 have a significant influence and show a reduction in catalytic activity. Modification at each location in Dz10-23 results in a decrease of the observed rate constants, with A12 appearing to be the most affected with a reduction of ∼80% of kobs and ∼25% of the maximal cleavage rate compared to the wild-type DNAzyme. On the other hand, modification of A12 in Dz8-17 showed an ∼130% increase in kobs, thus unraveling a new potential site for the introduction of chemical modifications. A pH-profile analysis showed that the chemical cleavage step is rate-determining, regardless of the presence and/or location of the mutation. These findings point towards the importance of the N3-nitrogens of certain adenine nucleotides located within the catalytic cores of the DNAzymes for efficient catalytic activity and further suggest that they might directly partake in maintaining the appropriate tertiary structure. Therefore, it appears that minor groove interactions constitute an important feature of DNAzymes as well as ribozymes.

DNA Catalysis: The Chemical Repertoire of DNAzymes

Deoxyribozymes or DNAzymes are single-stranded catalytic DNA molecules that are obtained by combinatorial in vitro selection methods. Initially conceived to function as gene silencing agents, the scope of DNAzymes has rapidly expanded into diverse fields, including biosensing, diagnostics, logic gate operations, and the development of novel synthetic and biological tools. In this review, an overview of all the different chemical reactions catalyzed by DNAzymes is given with an emphasis on RNA cleavage and the use of non-nucleosidic substrates. The use of modified nucleoside triphosphates (dN*TPs) to expand the chemical space to be explored in selection experiments and ultimately to generate DNAzymes with an expanded chemical repertoire is also highlighted.

Two Pb2+-specific DNAzymes with opposite trends in split-site-dependent activity

By splitting the catalytic core of DNAzymes into two halves, two Pb(2+)-specific DNAzymes retain partial activity, while they show opposite trends of activity as a function of the split site, revealing important nucleotides for catalysis and metal binding.

Advances in quantitative FRET-based methods for studying nucleic acids

Förster resonance energy transfer (FRET) is a powerful tool for monitoring molecular distances and interactions at the nanoscale level. The strong dependence of transfer efficiency on probe separation makes FRET perfectly suited for "on/off" experiments. To use FRET to obtain quantitative distances and three-dimensional structures, however, is more challenging. This review summarises recent studies and technological advances that have improved FRET as a quantitative molecular ruler in nucleic acid systems, both at the ensemble and at the single-molecule levels.

RNA-Cleaving DNA Enzymes and Their Potential Therapeutic Applications as Antibacterial and Antiviral Agents

DNA catalysts are synthetic single-stranded DNA molecules that have been identified by in vitro selection from random sequence DNA pools. The most prominent representatives of DNA catalysts (also known as DNA enzymes, deoxyribozymes, or DNAzymes) catalyze the site-specific cleavage of RNA substrates. Two distinct groups of RNA-cleaving DNA enzymes are the 10-23 and 8-17 enzymes. A typical RNA-cleaving DNA enzyme consists of a catalytic core and two short binding arms which form Watson–Crick base pairs with the RNA targets. RNA cleavage is usually achieved with the assistance of metal ions such as Mg²⁺, Ca²⁺, Mn²⁺, Pb²⁺, or Zn²⁺, but several chemically modified DNA enzymes can cleave RNA in the absence of divalent metal ions. A number of studies have shown the use of 10-23 DNA enzymes for modest downregulation of therapeutically relevant RNA targets in cultured cells and in whole mammals. Here we focus on mechanistic aspects of RNA-cleaving DNA enzymes and their potential to silence therapeutically appealing viral and bacterial gene targets. We also discuss delivery options and challenges involved in DNA enzyme-based therapeutic strategies.

In vitro selection of metal ion-selective DNAzymes

The discovery of DNAzymes that can catalyze a wide range of reactions in the presence of metal ions is important on both fundamental and practical levels; it advances our understanding of metal-nucleic acid interactions and allows for the design of highly sensitive and selective metal ion sensors. A crucial factor in this success is a technique known as in vitro selection, which can rapidly select metal-specific RNA-cleaving DNAzymes. In vitro selection is an iterative process where a DNA pool containing a random region is incubated with the target metal ion. Those DNA sequences that catalyze the preferred reaction (the "winners") are amplified and carried on to the next step, where the selection is carried out under more stringent conditions. In this way, the selection pool becomes enriched with DNAzymes that exhibit desirable activity and selectivity. The method described can be applied to isolate DNAzymes selective to many different types of metal ions or different oxidation states of the same metal ion.

Metal-ion-dependent folding of a uranyl-specific DNAzyme: insight into function from fluorescence resonance energy transfer studies

Fluorescence resonance energy transfer (FRET) has been used to study the global folding of an uranyl (UO(2)(2+))-specific 39E DNAzyme in the presence of Mg(2+), Zn(2+), Pb(2+), or UO(2)(2+). At pH 5.5 and physiological ionic strength (100 mM Na(+)), two of the three stems in this DNAzyme folded into a compact structure in the presence of Mg(2+) or Zn(2+). However, no folding occurred in the presence of Pb(2+) or UO(2)(2+); this is analogous to the "lock-and-key" catalysis mode first observed in the Pb(2+)-specific 8-17 DNAzyme. However, Mg(2+) and Zn(2+) exert different effects on the 8-17 and 39E DNAzymes. Whereas Mg(2+) or Zn(2+)-dependent folding promoted 8-17 DNAzyme activity, the 39E DNAzyme folding induced by Mg(2+) or Zn(2+) inhibited UO(2)(2+)-specific activity. Group IIA series of metal ions (Mg(2+), Ca(2+), Sr(2+)) also caused global folding of the 39E DNAzyme, for which the apparent binding affinity between these metal ions and the DNAzyme decreases as the ionic radius of the metal ions increases. Because the ionic radius of Sr(2+) (1.12 Å) is comparable to that of Pb(2+) (1.20 Å), but contrary to Pb(2+), Sr(2+) induces the DNAzyme to fold under identical conditions, ionic size alone cannot account for the unique folding behaviors induced by Pb(2+) and UO(2)(2+). Under low ionic strength (30 mM Na(+)), all four metal ions (Mg(2+), Zn(2+), Pb(2+), and UO(2)(2+)), caused 39E DNAzyme folding, suggesting that metal ions can neutralize the negative charge of DNA-backbone phosphates in addition to playing specific catalytic roles. Mg(2+) at low (<2 mM) concentration promoted UO(2)(2+)-specific activity, whereas Mg(2+) at high (>2 mM) concentration inhibited the UO(2)(2+)-specific activity. Therefore, the lock-and-key mode of DNAzymes depends on ionic strength, and the 39E DNAzyme is in the lock-and-key mode only at ionic strengths of 100 mM or greater.

Characterization of non-8-17 sequences uncovers structurally diverse RNA-cleaving deoxyribozymes

RNA-cleaving deoxyribozymes (DNAzymes) can be isolated from random-sequence DNA pools via the process of in vitro selection. However, small and simple catalytic motifs, such as the 8-17 DNAzyme, are commonly observed in sequence space, presenting a challenge in discovering large and complex DNAzymes. In an effort to investigate underrepresented molecular species derived from in vitro selection, in this study we sought to characterize non-8-17 sequences obtained from a previous in vitro selection experiment wherein the 8-17 deoxyribozyme was the dominant motif. We examined 9 sequence families from 21 motifs by characterizing their structural and functional features. We discovered 9 novel deoxyribozyme classes with large catalytic domains (>40 nucleotides) utilizing three-way or four-way junction structural frameworks. Kinetic studies revealed that these deoxyribozymes exhibit moderate to excellent catalytic rates (k(obs) from 0.003 to 1 min(-1)), compared to other known RNA-cleaving DNAzymes. Although chemical probing experiments, site-directed mutational analyses, and metal cofactor dependency tests suggest unique catalytic cores for each deoxyribozyme, common dinucleotide junction selectivity was observed between DNAzymes with similar secondary structural features. Together, our findings indicate that larger, structurally more complex, and diverse catalytic motifs are able to survive the process of in vitro selection despite a sequence space dominated by smaller and structurally simpler catalysts.