Biologically Active Micropatterns of Biomolecules and Living Matter Using Microbubble Lithography

In situ patterning of biomolecules and living organisms while retaining their biological activity is extremely challenging, primarily because such patterning typically involves thermal stresses that could be substantially higher than the physiological thermal or stress tolerance level. Top-down patterning approaches are especially prone to these issues, while bottom-up approaches suffer from a lack of control in developing defined structures and the time required for patterning. A microbubble generated and manipulated by optical tweezers (microbubble lithography) is used to self-assemble and pattern living organisms in continuous microscopic structures in real-time, where the material thus patterned remains biologically active due to their ability to withstand elevated temperatures for short exposures. Successful patterns of microorganisms (Escherichia coli, Lactococcus. lactis and the Type A influenza virus) are demonstrated, as well as reporter proteins such as green fluorescent protein (GFP) on functionalized substrates with high signal-to-noise ratio and selectivity. Together, the data presented herein may open up fascinating possibilities in rapid in situ parallelized diagnostics of multiple pathogens and bioelectronics.

Quantum-Chemistry Study of the Photophysical Properties of 4-Thiouracil and Comparisons with 2-Thiouracil

DNA in living beings is constantly damaged by exogenous and endogenous agents. However, in some cases, DNA photodamage can have interesting applications, as it happens in photodynamic therapy. In this work, the current knowledge on the photophysics of 4-thiouracil has been extended by further quantum-chemistry studies to improve the agreement between theory and experiments, to better understand the differences with 2-thiouracil, and, last but not least, to verify its usefulness as a photosensitizer for photodynamic therapy. This study has been carried out by determining the most favorable deactivation paths of UV-vis photoexcited 4-thiouracil by means of the photochemical reaction path approach and an efficient combination of the complete-active-space second-order perturbation theory//complete-active-space self-consistent field (CASPT2//CASSCF), (CASPT2//CASPT2), time-dependent density functional theory (TDDFT), and spin-flip TDDFT (SF-TDDFT) methodologies. By comparing the data computed herein for both 4-thiouracil and 2-thiouracil, a rationale is provided on the relatively higher yields of intersystem crossing, triplet lifetime and singlet oxygen production of 4-thiouracil, and the relatively higher yield of phosphorescence of 2-thiouracil.

DNA origami-based protein networks: from basic construction to emerging applications

Natural living systems are driven by delicate protein networks whose functions are precisely controlled by many parameters, such as number, distance, orientation, and position. Focusing on regulation rather than just imitation, the construction of artificial protein networks is important in many research areas, including biomedicine, synthetic biology and chemical biology. DNA origami, sophisticated nanostructures with rational design, can offer predictable, programmable, and addressable scaffolds for protein assembly with nanometer precision. Recently, many interdisciplinary efforts have achieved the precise construction of DNA origami-based protein networks, and their emerging application in many areas. To inspire more fantastic research and applications, herein we highlight the applicability and potentiality of DNA origami-based protein networks. After a brief introduction to the development and features of DNA origami, some important factors for the precise construction of DNA origami-based protein networks are discussed, including protein-DNA conjugation methods, networks with different patterns and the controllable parameters in the networks. The discussion then focuses on the emerging application of DNA origami-based protein networks in several areas, including enzymatic reaction regulation, sensing, bionics, biophysics, and biomedicine. Finally, current challenges and opportunities in this research field are discussed.

DNA nanostructures as templates for biomineralization

Nature uses extracellular matrix scaffolds to organize biominerals into hierarchical structures over various length scales. This has inspired the design of biomimetic mineralization scaffolds, with DNA nanostructures being among the most promising. DNA nanotechnology makes use of molecular recognition to controllably give 1D, 2D and 3D nanostructures. The control we have over these structures makes them attractive templates for the synthesis of mineralized tissues, such as bones and teeth. In this Review, we first summarize recent work on the crystallization processes and structural features of biominerals on the nanoscale. We then describe self-assembled DNA nanostructures and come to the intersection of these two themes: recent applications of DNA templates in nanoscale biomineralization, a crucial process to regenerate mineralized tissues.

Tuning G-Quadruplex Nanostructures with Lipids. Towards Designing Hybrid Scaffolds for Oligonucleotide Delivery

Two G-quadruplex forming oligonucleotides [d(TG₄T)₄ and d(TG₆T)₄] were selected as two tetramolecular quadruplex nanostructures because of their demonstrated ability to be modified with hydrophobic molecules. This allowed us to synthesize two series of G-quadruplex conjugates that differed in the number of G-tetrads, as well as in the terminal position of the lipid modification. Both solution and solid-phase syntheses were carried out to yield the corresponding lipid oligonucleotide conjugates modified at their 3′- and 5′-termini, respectively. Biophysical studies confirmed that the presence of saturated alkyl chains with different lengths did not affect the G-quadruplex integrity, but increased the stability. Next, the G-quadruplex domain was added to an 18-mer antisense oligonucleotide. Gene silencing studies confirmed the ability of such G-rich oligonucleotides to facilitate the inhibition of target Renilla luciferase without showing signs of toxicity in tumor cell lines.

RNase A activity analysis and imaging using label-free DNA-templated silver nanoclusters

A label-free, ultra-sensitive and turn-on method for detecting RNase A has been developed using enhanced DNA-templated silver nanoclusters (DNA-AgNCs) as the fluorescence probe. In this system, an RNA strand, which can perfectly hybridize with DNA template of nanocluster synthesis, was applied to lock the fluorescent signal of DNA-AgNCs by forming an RNA/DNA duplex. Meanwhile, the hybridized RNA/DNA duplex was used as the substrate of RNase A. The fluorescence signal of AgNCs was restored due to the degradation of RNA by RNase A. From the fluorescence signal change of this system caused by RNase A, it was found that the fluorescence signal showed a positive linear relation with RNase A concentration in the range from 0.2 pg/μL to 10 pg/μL with a detection limit of 0.098 pg/μL. Except for potential inhibitor screening and the kinetic study of this enzyme, this strategy was further used for monitoring dynamic change of RNase A in living cells successfully. In summary, the simple and sensitive method for RNase A assay can be hopefully used for drug screening in vitro and in vivo.

Functionalized DNA nanostructures as scaffolds for guided mineralization

The field of DNA nanotechnology uses synthetic DNA strands as building blocks for designing complex shapes in one-, two- and three-dimensions. Here, we investigate whether DNA nanostructures are feasible platforms for the precise organization of polyaspartic acid (pAsp), a known mineral carrier, with a goal towards biomimetic mineralization for enamel regeneration. We describe the preparation of DNA-pAsp conjugates and their subsequent assembly into ordered nanostructures. Covalent attachment of pAsp to DNA was noted to hinder DNA nanostructure formation past a certain threshold (50% pAsp) when tested on a previously published DNA system. However, a simplified double stranded DNA system (3sDH system) was more robust and efficient in its pAsp incorporation. In addition, the 3sDH system was successful in organizing mineral inducing groups in one dimension at repeating intervals of 28.7 ± 4.0 nm, as determined by atomic force microscopy. Our results demonstrate that DNA nanostructures can be functionalized with pAsp and act as a platform to investigate guided mineralization.

Photoresponsive Self-Assembled DNA Nanomaterials: Design, Working Principles, and Applications

Photoresponsive DNA nanomaterials represent a new class of remarkable functional materials. By adjusting the irradiation wavelength, light intensity, and exposure time, various photocontrolled DNA-based systems can be reversibly or irreversibly regulated in respect of their size, shape, conformation, movement, and dissociation/association. This Review introduces the most updated progress in the development of photoresponsive DNA-based system and emphasizes their advantages over other stimuli-responsive systems. Their design and mechanisms to trigger the photoresponses are shown and discussed. The potential application of these photon-responsive DNA nanomaterials in biology, biomedicine, materials science, nanophotonic and nanoelectronic are also covered and described. The challenges faced and further directions of the development of photocontrolled DNA-based systems are also highlighted.

Overview of DNA Self-Assembling: Progresses in Biomedical Applications

Molecular self-assembling is ubiquitous in nature providing structural and functional machinery for the cells. In recent decades, material science has been inspired by the nature's assembly principles to create artificially higher-order structures customized with therapeutic and targeting molecules, organic and inorganic fluorescent probes that have opened new perspectives for biomedical applications. Among these novel man-made materials, DNA nanostructures hold great promise for the modular assembly of biocompatible molecules at the nanoscale of multiple shapes and sizes, designed via molecular programming languages. Herein, we summarize the recent advances made in the designing of DNA nanostructures with special emphasis on their application in biomedical research as imaging and diagnostic platforms, drug, gene, and protein vehicles, as well as theranostic agents that are meant to operate in-cell and in-vivo.

Programmable and Multifunctional DNA-Based Materials for Biomedical Applications

DNA encodes the genetic information; recently, it has also become a key player in material science. Given the specific Watson-Crick base-pairing interactions between only four types of nucleotides, well-designed DNA self-assembly can be programmable and predictable. Stem-loops, sticky ends, Holliday junctions, DNA tiles, and lattices are typical motifs for forming DNA-based structures. The oligonucleotides experience thermal annealing in a near-neutral buffer containing a divalent cation (usually Mg²⁺ ) to produce a variety of DNA nanostructures. These structures not only show beautiful landscape, but can also be endowed with multifaceted functionalities. This Review begins with the fundamental characterization and evolutionary trajectory of DNA-based artificial structures, but concentrates on their biomedical applications. The coverage spans from controlled drug delivery to high therapeutic profile and accurate diagnosis. A variety of DNA-based materials, including aptamers, hydrogels, origamis, and tetrahedrons, are widely utilized in different biomedical fields. In addition, to achieve better performance and functionality, material hybridization is widely witnessed, and DNA nanostructure modification is also discussed. Although there are impressive advances and high expectations, the development of DNA-based structures/technologies is still hindered by several commonly recognized challenges, such as nuclease instability, lack of pharmacokinetics data, and relatively high synthesis cost.

DNA-based nanoscaffolds as vehicles for 5-fluoro-2'-deoxyuridine oligomers in colorectal cancer therapy

Fluoropyrimidines, such as 5-fluorouracil (5-FU) and related prodrugs, are considered one of the most successful agents in the treatment of colorectal cancer, yet poor specificity and tumor cell resistance remain the major limiting bottlenecks. Here, we exploited for the first time the ability of two DNA nanoscaffolds, a DNA tetrahedron (Td) and rectangle DNA origami, to incorporate 5-fluoro-2'-deoxyuridine (FdUn) oligomers. In addition, cholesterol moieties were synthetically attached to Td and DNA origami staples to enhance cellular uptake. DNA nanostructures functionalized with FdUn exhibited an enhanced cytotoxicity and higher ability to trigger apoptosis in colorectal cancer cells relative to conventional 5-FU and FdU, especially having cholesterol as an internalization helper. The cholesterol content mostly correlates with the increase of the FdUn nanostructure cytotoxicity. DNA nanoscaffolds bearing FdUn were able to circumvent the low sensitivity of colorectal cancer cells towards 5-FU. Both DNA nanostructures attained a comparable cytotoxic effect yet Td displays higher antiproliferative action. The ability to reduce the proliferation of cancer cells is mainly related to the concentration of DNA nanostructures. The present work suggests that self-assembled DNA nanoparticles are privileged vehicles for delivering fluoropyrimidines, opening new avenues to the development of promising therapeutics for cancer treatment.

Formation of G-wires, bimolecular and tetramolecular quadruplex: Cation-induced structural polymorphs of G-rich DNA sequence of human SYTX gene

An exceptional property of auto-folding into a range of intra- as well as intermolecular quadruplexes by guanine-rich oligomers (GROs) of promoters, telomeres and various other genomic locations is still one of the most attractive areas of research at present times. The main reason for this attention is due to their established in vivo existence and biological relevance. Herein, the structural status of a 20-nt long G-rich sequence with two G5 stretches (SG20) is investigated using various biophysical and biochemical techniques. Bioinformatics analysis suggested the presence of a 17-nt stretch of this SG20 sequence in the intronic region of human SYTX (Synaptotagmin 10) gene. The SYTX gene helps in sensing out the Ca²⁺ ion, causing its intake in the pre-synaptic neuron. A range of various topologies like bimolecular, tetramolecular and guanine-wires (nano-wires) was exhibited by the studied sequence, as a function of cations (Na⁺ /K⁺ ) concentration. UV-thermal denaturation, gel electrophoresis, and circular dichroism (CD) spectroscopy showed correlations and established a cation-dependent structural switch. The G-wire formation, in the presence of K⁺ , may further be explored for its possible relevance in nano-biotechnological applications.

Localized DNA Hybridization Chain Reactions on DNA Origami

The field of DNA nanoscience has demonstrated many exquisite DNA nanostructures and intricate DNA nanodevices. However, the operation of each step of prior demonstrated DNA nanodevices requires the diffusion of DNA strands, and the speed of these devices is limited by diffusion kinetics. Here we demonstrate chains of localized DNA hybridization reactions on the surface of a self-assembled DNA origami rectangle. The localization design for our DNA nanodevices does not rely on the diffusion of DNA strands for each step, thus providing faster reaction kinetics. The locality also provides considerable increased scalability, since localized components of the devices can be reused in other locations. A variety of techniques, including atomic force microscopy, total internal reflection fluorescence, and ensemble fluorescence spectroscopy, are used to confirm the occurrence of localized DNA hybridization reactions on the surface of DNA origami. There are many potential biological applications for our localized DNA nanodevices, and the localization design is extensible to applications involving DNA nanodevices operating on other molecular surfaces, such as those of the cell.

DNA-Origami-Driven Lithography for Patterning on Gold Surfaces with Sub-10 nm Resolution

Sub-10 nm lithography of DNA patterns is achieved using the DNA-origami stamping method. This new strategy utilizes DNA origami to bind a preprogrammed DNA ink pattern composed of thiol-modified oligonucleotides on gold surfaces. Upon denaturation of the DNA origami, the DNA ink pattern is exposed. The pattern can then be developed by hybridization with complementary strands carrying gold nanoparticles.

Enhancement of RecA-mediated self-assembly in DNA nanostructures through basepair mismatches and single-strand nicks

The use of DNA as a structural material for nanometre-scale construction has grown extensively over the last decades. The development of more advanced DNA-based materials would benefit from a modular approach enabling the direct assembly of additional elements onto nanostructures after fabrication. RecA-based nucleoprotein filaments encapsulating short ssDNA have been demonstrated as a tool for highly efficient and fully programmable post-hoc patterning of duplex DNA scaffold. However, the underlying assembly process is not fully understood, in particular when patterning complex DNA topologies. Here, we report the effect of basepair-mismatched regions and single-strand nicks in the double-stranded DNA scaffold on the yield of RecA-based assembly. Significant increases in assembly yield are observed upon the introduction of unpaired basepairs directly adjacent to the assembly region. However, when the unpaired regions were introduced further from the assembly site the assembly yield initially decreased as the length of the unpaired region was increased. These results suggest that an unpaired region acts as a kinetic trap for RecA-based nucleoprotein filaments, impeding the assembly mechanism. Conversely, when the unpaired region is located directly adjacent to the assembly site, it leads to an increase in efficiency of RecA patterning owing to increased breathing of the assembly site.

Folding and misfolding pathways of G-quadruplex DNA

G-quadruplexes adopt various folding topologies, but information on their folding pathways remains scarce. Here, we used electrospray mass spectrometry to detect and quantify the specifically bound potassium ions, and circular dichroism to characterize the stacking topology of each ensemble. For human telomeric (hTel) sequences containing the d((GGGTTA)₃GGG) core, K⁺ binding affinity and cooperativity strongly depends on the chosen construct. The shortest sequences bind only one K⁺ at low KCl concentration, and this 2-quartet G-quadruplex is antiparallel. Flanking bases increase the K⁺ binding cooperativity. To decipher the folding pathways, we investigated the kinetics of K⁺ binding to telomeric (hybrid) and c-myc (parallel) G-quadruplexes. G-quadruplexes fold via branched pathways with multiple parallel reactions. Up to six states (one ensemble without K⁺, two ensembles with 1-K⁺ and three ensembles with 2-K⁺) are separated based on their formation rates and ion mobility spectrometry. All G-quadruplexes first form long-lived misfolded structures (off-pathway compared to the most stable structures) containing one K⁺ and two quartets in an antiparallel stacking arrangement. The results highlight the particular ruggedness of G-quadruplex nucleic acid folding landscapes. Misfolded structures can play important roles for designing artificial G-quadruplex based structures, and for conformational selection by ligands or proteins in a biological context.

Structural insight into DNA-assembled oligochromophores: crystallographic analysis of pyrene- and phenanthrene-modified DNA in complex with BpuJI endonuclease

The use of the DNA duplex as a supramolecular scaffold is an established approach for the assembly of chromophore aggregates. In the absence of detailed structural insight, the characterization of thus assembled oligochromophores is, today, largely based on solution-phase spectroscopy. Here, we describe the crystal structures of three DNA-organized chromophore aggregates. DNA hybrids containing non-nucleosidic pyrene and phenanthrene building blocks were co-crystallized with the recently described binding domain of the restriction enzyme BpuJI. Crystal structures of these complexes were determined at 2.7, 1.9 and 1.6 Å resolutions. The structures reveal aromatic stacking interactions between pyrene and/or phenanthrene units within the framework of the B-DNA duplex. In hybrids containing a single modification in each DNA strand near the end of the duplex, the two polyaromatic hydrocarbons are engaged in a face-to-face stacking orientation. Due to crystal packing and steric effects, the terminal GC base pair is disrupted in all three crystal structures, which results in a non-perfect stacking arrangement of the aromatic chromophores in two of the structures. In a hybrid containing a total of three pyrenes, crystal lattice induced end-to-end stacking of individual DNA duplexes leads to the formation of an extended aromatic π-stack containing four co-axially arranged pyrenes. The aromatic planes of the stacked pyrenes are oriented in a parallel way. The study demonstrates the value of co-crystallization of chemically modified DNA with the recombinant binding domain of the restriction enzyme BpuJI for obtaining detailed structural insight into DNA-assembled oligochromophores.

Quadruplex Turncoats: Cation-Dependent Folding and Stability of Quadruplex-DNA Double Switches

Quadruplex (G4) nucleic acids, a family of secondary structures formed by guanine-rich sequences, exhibit an important structural polymorphism. We demonstrate here that G-rich DNA sequences may function as a double switch based on different triggers, provided that their quadruplex structures and stability display a high dependence on cation nature and concentration. A first switch is based on a remarkable antiparallel-to-parallel conversion, taking place in a few seconds at room temperature by addition of low KCl amounts to a sodium-rich sample. The second switch involves the conversion of alternative antiparallel quadruplex structures binding only one cation, formed in the presence of sub-millimolar potassium or strontium concentrations, to parallel structures by increasing the cation concentration. Incidentally, extremely low K(+) or Sr(2+) concentrations (≤5 equiv) are sufficient to induce G4 formation in a buffer devoid of other G4-promoting cations, and we suggest that the alternative structures observed contain only two tetrads. Such DNA systems are biological relevant targets, can be used in nanotechnology applications, and are valuable methodological tools for understanding DNA quadruplex folding, notably at low cation concentrations. We demonstrate that this behavior is not restricted to a narrow set of sequences but can also be found for other G-quadruplex-forming motifs, arguing for widespread applications.

Mitochondrial Delivery of Therapeutic Agents by Amphiphilic DNA Nanocarriers

The first example of mitochondrial delivery of the anticancer drug doxorubicin (Dox) is presented by lipid-functionalized DNA nanocages (LNCs). Dox localized in mitochondria induces significant cytotoxicity and cellular apoptosis in MCF-7 compared with Dox localized in lysosomes. These results suggest that LNC has the potential to be an outstanding tool in the treatment of specific organelle-related diseases such as cancers.

Flexibility of C3h -Symmetrical Linkers in Tris-oligonucleotide-Based Tetrahedral Scaffolds

Flexibility of tris-oligonucleotides is determined by the length of their connecting hydrocarbon chains. Tris-oligonucleotides are branched DNA building blocks with three oligonucleotide arms attached to a C3h -symmetrical linker core at these chains. Four tris-oligonucleotides hybridise into a tetrahedral nanocage by sequence-determined self-assembly. The influence of methylene, ethylene and propylene chains was studied by synthesising sets of tris-oligonucleotides and analysing the relative stability of the hybridisation products against digestion by mung bean nuclease by using gel electrophoresis. Linkers with ethylene chains showed sufficient flexibility, whereas methylene-chain linkers were too rigid. Tris-oligonucleotides based on the latter still formed tetrahedral scaffolds in intermixing experiments with linkers of higher flexibility. Thus, a new generation of versatile isocyanurate-based linkers was established.

DNA nanotechnology: new adventures for an old warhorse

As the blueprint of life, the natural exploits of DNA are admirable. However, DNA should not only be viewed within a biological context. It is an elegantly simple yet functionally complex chemical polymer with properties that make it an ideal platform for engineering new nanotechnologies. Rapidly advancing synthesis and sequencing technologies are enabling novel unnatural applications for DNA beyond the realm of genetics. Here we explore the chemical biology of DNA nanotechnology for emerging applications in communication and digital data storage. Early studies of DNA as an alternative to magnetic and optical storage mediums have not only been promising, but have demonstrated the potential of DNA to revolutionize the way we interact with digital data in the future.

Synthetic Biology: A New Tool for the Trade

Protein-protein interactions are fundamental to many biological processes. Yet, the weak and transient noncovalent bonds that characterize most protein-protein interactions found in nature impose limits on many bioengineering experiments. Here, a new class of genetically encodable peptide-protein pairs--isopeptag-N/pilin-N, isopeptag/pilin-C, and SpyTag/SpyCatcher--that interact through autocatalytic intermolecular isopeptide bond formation is described. Reactions between peptide-protein pairs are specific, robust, orthogonal, and able to proceed under most biologically relevant conditions both in vitro and in vivo. As fusion constructs, they provide a handle on molecules of interest, both organic and inorganic, that can be grasped with an iron grip. Such stable interactions provide robust post-translational control over biological processes and open new opportunities in synthetic biology for engineering programmable and self-assembling protein nanoarchitectures.

Conformational Change of Self-Assembled DNA Nanotubes Induced by Two-Photon Excitation

Two-photon-regulated, shape-changing DNA nanostructures are demonstrated by integrating a DNA nanotube with a two-photon photocleavable module that enables the opening of the cavities of tube, and becomes partially single-stranded in response to two-photon excitation under 800 nm fs laser pulses.

A purification method for a molecular complex in which a scaffold molecule is fully loaded with heterogeneous molecules

An affinity resin-based pull-down method is convenient for the purification of biochemical materials. However, its use is difficult for the isolation of a molecular complex fully loaded with multiple components from a reaction mixture containing the starting materials and intermediate products. To overcome this problem, we have developed a new purification procedure that depends on sequential elimination of the residues. In practice, two affinity resins were used for purifying a triangular-shaped RNP (RNA-protein complex) consisting of three ribosomal proteins (L7Ae) bound to an RNA scaffold. First, a resin with immobilized L7Ae protein captured the incomplete RNP complexes and the free RNA scaffold. Next, another resin with an immobilized chemically modified RNA of a derivative of Box C/D motif, the binding partner of L7Ae, was used to capture free protein. The complete triangular RNP was successfully purified from the mixture by these two steps. Obviously, the purified triangular RNP displaying three protein-binding peptides exhibited an improved performance when compared with the unrefined product. Conceptually, this purification procedure should be applicable for the purification of a variety of complexes consisting of multiple components other than RNP.

DNA origami nanopores: developments, challenges and perspectives

DNA nanotechnology has enabled the construction of DNA origami nanopores; synthetic nanopores that present improved capabilities for the area of single molecule detection. Their extraordinary versatility makes them a new and powerful tool in nanobiotechnology for a wide range of important applications beyond molecular sensing. In this review, we briefly present the recent developments in this emerging field of research. We discuss the current challenges and possible solutions that would enhance the sensing capabilities of DNA origami nanopores. Finally, we anticipate novel avenues for future research and highlight a range of exciting ideas and applications that could be explored in the near future.