Iron-Functionalized Silica Nanoparticles as a Highly Efficient Adsorbent and Catalyst for Toluene Oxidation in the Gas Phase

Influence of Alumina Precursor Properties on Cu-Fe Alumina Supported Catalysts for Total Toluene Oxidation as a Model Volatile Organic Air Pollutant

The structure–property relationship of catalytic supports for the deposition of redox-active transition metals is of great importance for improving the catalytic efficiency and reusability of the catalysts. In this work, the role of alumina support precursors of Cu-Fe/Al2O3 catalysts used for the total oxidation of toluene as a model volatile organic air pollutant is elucidated. Surface characterization of the catalysts revealed that the surface area, pore volume and acid site concentration of the alumina supports are important but not the determining factors for the catalytic activity of the studied catalysts for this type of reaction. The determining factors are the structural order of the support precursor, the homogeneous distribution of the catalytic sites and reducibility, which were elucidated by XRD, NMR, TEM and temperature programed reduction (TPR). Cu–Fe/Al2O3 prepared from bayerite and pseudoboehmite as highly ordered precursors showed better catalytic performance compared to Cu-Fe/Al2O3 derived from the amorphous alumina precursor and dawsonite. Homogeneous distribution of FexOy and CuOx with defined Cu/Fe molar ratio on the Al2O3 support is required for the efficient catalytic performance of the material. The study showed a beneficial effect of low iron concentration introduced into the alumina precursor during the alumina support synthesis procedure, which resulted in a homogeneous metal oxide distribution on the support.

Structural variations and generation of binding sites in Fe-loaded ZSM-5 and silica under the effect of UV-irradiation and their role in enhanced BTEX abatement from gas streams

Here, we have investigated the effect of UV-pretreatment on the physicochemical properties of an adsorbent. The UV-irradiated Fe-incorporated ZSM-5 (UV-FZ5) showed structural and chemical changes arising due to UV-cleaving of framework bonds resulting in a decreased crystallinity and change in the local environment of Fe species. More visible modifications were observed for UV-irradiated iron-containing silica (UV-Fe/AS) where silica network reconfiguration, increased hydroxyl density, and change in the Fe coordination were estimated. A 0.5-81.2% increase in BTEX adsorption was recorded for UV-irradiated adsorbents. These hiked performances were attributed to the increased pore size, increased hydroxyl density, and formation of newer isolated Fe³⁺ framework species. For FZ5, adsorption occurred via size-selective diffusion followed by hydrogen bonding and cation-pi interaction, whereas, for Fe/AS, diffusion was followed by cation-pi interactions. Moreover, adsorbents retained their adsorption capacity for multiple cycles and were found economically suitable for treating VOCs-contaminated air.

Green Flexible Polyurethane Foam as a Potent Support for Fe-Si Adsorbent

This paper describes the preparation, characterisation, and potential application of flexible palm oil-based polyurethane foam (PUF) as a support for iron-silica (Fe-Si) adsorbent. Fe-Si/polyurethane composite (Fe-Si/PUC) was prepared by impregnating Fe-Si adsorbent onto the surface of PUF by using a novel immersion-drying method. Morphological analysis of Fe-Si/PUC proved that Fe-Si was successfully impregnated onto the surface of PUF. Compression test and thermogravimetric analysis were carried out to determine the flexibility and thermal stability of Fe-Si/PUC, respectively. The Fe-Si/PUC removed 90.0% of 10 ppm methylene blue (MB) from aqueous solution in 60 min. The reusability study showed that Fe-Si/PUC removed 55.9% of MB on the seventh cycle. Hence, the synthesis of Fe-Si/PUC opens up a new path of implementing palm oil-based PUF to assist in the recovery of an adsorbent for environmental clean-up. The mechanism of physical interaction during the impregnation of Fe-Si adsorbent onto PUF was proposed in this paper.

Studies on non-modified and copper-modified coal ash zeolites as heterogeneous catalysts for VOCs oxidation

The present study is aimed at investigations on the catalytic activity for total oxidation of volatile organic compounds (VOCs), such as toluene, acetone, n-hexane and dichlorobenzene onto zeolite-like materials synthesized from coal fly ash (FA) directed to development of an economically efficient approach for degradation of VOCs. Fly ash zeolites (FAZ) were prepared by alkaline conversion of FA collected from Thermal Power Plants supplied with lignite coal from "Maritza-East" basin in Bulgaria. Different synthesis procedures double stage fusion-hydrothermal activation, fusion-atmospheric crystallization and atmospheric aging were applied. The synthesis products were identified by X-ray diffraction, and were assigned to zeolite Na-X. Scanning electron microscopy images reveal submicron dimensions of the composing crystallites. Nitrogen adsorption/desorption measurements reveal a mixed micro-mesoporous structure and specific surface area between 116 and 396 m²/g for the obtained FAZ. Relationships between surface properties, iron content and the catalytic activity of FAZ were investigated and discussed. Copper-modified fly ash zeolites (Cu-FAZ) were prepared by incipient wetness impregnation technique with copper acetylacetonate. The loading of 5 wt. % copper on the zeolite samples was achieved. The catalytic activity of FAZ and Cu-FAZ in the total oxidation of model VOCs mixture containing n-hexane, acetone, toluene, 1,2 dichlorobenzene was evaluated.

On the Chemistry of Iron Oxide Supported on γ-Alumina and Silica Catalysts

Catalysts of iron oxide on γ-alumina and silica which were prepared by an incipient wetness impregnation technique have been investigated in an effort to understand how the surface chemical properties are influenced by the nature of the supports. Surprisingly, this is the first study to compare in depth the influence of the supports on physicochemical parameters such as acidity, site nuclearity, and reducibility. In this study, surface characterisation techniques including N₂ physisorption at -196 °C, ammonia temperature-programmed desorption, inductively coupled plasma optical emission spectrometry, temperature-programmed reduction with hydrogen, CO-chemisorption, scanning electron microscopy, transmission electron microscopy, and NO adsorption by in situ Fourier transform infrared spectroscopy have been performed to understand the different surface reactions occurring over the two different supports. The aim of this study is to ascertain the primary differences between these two catalysts using several catalyst characterization techniques and correlate their chemical and structural differences to their catalytic activity in the conversion of 2-chlorophenol. The results disclose a higher density of acid sites, a smaller particle size of iron oxide, stabilization of Fe(II) aluminate after reduction on the alumina surface, and finally, the formation of isolated iron cations on the surface of alumina which are notably absent on the silica-supported catalyst.

A highly active Pt–Fe/γ-Al2O3 catalyst for preferential oxidation of CO in excess of H2 with a wide operation temperature window

Pt cluster supported single-atom Fe species are highly active and selective for CO-PROX from 25 °C to 200 °C.