Contribution of Deep Eutectic Solvents for Biomass Processing: Opportunities, Challenges, and Limitations

Exploring the versatility of biodegradable biomass aerogels: In-depth evaluation of Firmiana simplex bark microfibers depolymerized by deep eutectic solvent

In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.

Maximizing Degumming Efficiency for Firmiana simplex Bark Using Deep Eutectic Solvents

Degumming is a critical process in the purification of natural fibers, essential for enhancing their quality and usability across various applications. Traditional degumming methods employed for natural fibers encounter inherent limitations, encompassing prolonged procedures, excessive energy consumption, adverse environmental impact, and subpar efficiency. To address these challenges, a groundbreaking wave of degumming technique has emerged, transcending these constraints and heralding a new era of efficiency, sustainability, and eco-friendly techniques. This study represents the Firmiana simplex bark (FSB) fiber's delignification by using deep eutectic solvents (DESs). The study explores the application of deep eutectic solvents, by synthesizing different types of DES using a hydrogen bond acceptor (HBA) and four representative hydrogen bond donors (HBDs) for FSB fiber degumming. This study investigates the morphologies, chemical compositions, crystallinities, and physical properties of Firmiana simplex bark fibers before and after the treatment. Furthermore, the effects and mechanisms of different DESs on dispersing FSB fibers were examined. The experimental results showed that choline chloride-urea (CU)-based DES initiates the degumming process by effectively disrupting the hydrogen bond interaction within FSB fibers, primarily by outcompeting chloride ions. Following this initial step, the DES acts by deprotonating phenolic hydroxyl groups and cleaving β-O-4 bonds present in diverse lignin units, thereby facilitating the efficient removal of lignin from the fibers. This innovative approach resulted in significantly higher degumming efficiency and ecofriendly as compared to traditional methods. Additionally, the results revealed that CU-based DES exhibits the utmost effectiveness in degumming FSB fibers. The optimal degumming conditions involve a precise processing temperature of 160 °C and a carefully controlled reaction time of 2 h yielding the most favorable outcomes. The present study presents a novel straightforward and environmentally friendly degumming method for Firmiana simplex bark, offering a substantial potential for enhancing the overall quality and usability of the resulting fibers. Our findings open new pathways for sustainable fiber-processing technologies.

A Comprehensive Analysis of Diversity, Structure, Biosynthesis and Extraction of Biologically Active Tannins from Various Plant-Based Materials Using Deep Eutectic Solvents

This paper explores the emerging subject of extracting tannins from various plant sources using deep eutectic solvents (DESs). Tannins are widely used in the food and feed industries as they have outstanding antioxidant qualities and greatly enhance the flavor and nutritional content of a wide range of food products. Organic solvents are frequently used in traditional extraction techniques, which raises questions about their safety for human health and the environment. DESs present a prospective substitute because of their low toxicity, adaptability, and environmental friendliness. The fundamental ideas supporting the application of DESs in the extraction of tannins from a range of plant-based materials frequently used in daily life are all well covered in this paper. Furthermore, this paper covers the impact of extraction parameters on the yield of extracted tannins, as well as possible obstacles and directions for future research in this emerging subject. This includes challenges such as high viscosity, intricated recovery of compounds, thermal degradation, and the occurrence of esterification. An extensive summary of the diversity, structure, biosynthesis, distribution, and roles of tannins in plants is given in this paper. Additionally, this paper thoroughly examines various bioactivities of tannins and their metabolites.

Current progress and future perspective of microalgae biomass pretreatment using deep eutectic solvents

Pretreatment process is considered as the most important step for effective microalgae biomass refining and has gained more interest since last decades. However, the main obstacles to commercialize microalgae products are recalcitrant cell wall and lack of cost-effective, green, and sustainable pretreatment approaches. Till now, various microalgae pretreatment approaches have been applied prior to extraction steps to enhance the accessibility of solvent inside the cells. However, high energy consumption and the hazardousness of solvents are considerable problem for these pretreatment methods. In this regard, deep eutectic solvents are recognized as sustainable and green solvents possessing great potential for microalgae biomass processing due to their low toxicity, low cost, biodegradability, easy recycling, and reuse. This article provides the fundamentals of DES composition, synthesis, properties, and the current advances in the application of microalgae biomass process.

Valorization of Glucose-Derived Humin as a Low-Cost, Green, Reusable Adsorbent for Dye Removal, and Modeling the Process

Glucose can be isomerized into fructose and dehydrated into key platform biochemicals, following the "bio-refinery concept". However, this process generates black and intractable substances called humin, which possess a polymeric furanic-type structure. In this study, glucose-derived humin (GDH) was obtained by reacting D-glucose with an allylamine catalyst in a deep eutectic solvent medium, followed by a carbonization step. GDH was used as a low-cost, green, and reusable adsorbent for removing cationic methylene blue (MB) dye from water. The morphology of carbonized GDH differs from pristine GDH. The removal efficiencies of MB dye using pristine GDH and carbonized GDH were 52% and 97%, respectively. Temperature measurements indicated an exothermic process following pseudo-first-order kinetics, with adsorption behavior described by the Langmuir isotherm. The optimum parameters were predicted using the response surface methodology and found to be a reaction time of 600 min, an initial dye concentration of 50 ppm, and a GDH weight of 0.11 g with 98.7% desirability. The MB dye removal rate optimized through this model was 96.85%, which was in good agreement with the experimentally obtained value (92.49%). After 10 cycles, the MB removal rate remained above 80%, showcasing the potential for GDH reuse and cost-effective wastewater treatment.

Biomass carbon mining to develop nature-inspired materials for a circular economy

A transition from a linear to a circular economy is the only alternative to reduce current pressures in natural resources. Our society must redefine our material sources, rethink our supply chains, improve our waste management, and redesign materials and products. Valorizing extensively available biomass wastes, as new carbon mines, and developing biobased materials that mimic nature's efficiency and wasteless procedures are the most promising avenues to achieve technical solutions for the global challenges ahead. Advances in materials processing, and characterization, as well as the rise of artificial intelligence, and machine learning, are supporting this transition to a new materials' mining. Location, cultural, and social aspects are also factors to consider. This perspective discusses new alternatives for carbon mining in biomass wastes, the valorization of biomass using available processing techniques, and the implementation of computational modeling, artificial intelligence, and machine learning to accelerate material's development and process engineering.

Deep Eutectic Liquids as Tailorable Extraction Solvents: A Review of Opportunities and Challenges

Deep Eutectic Liquids (DELs) fall among the rapidly evolving discoveries of the 21st century, and these liquids are considered as alternative solvents to toxic and volatile organic liquids. Nevertheless, the emerging trend regarding the use of DELs in every field of physical and biological sciences, a lot of ambiguities and misconceptions exist about their formation, mechanism, and efficiencies observed or projected. A review of available technical data makes it obvious that these liquids have the potential to revolutionize the underdeveloped areas of analytical chemistry particularly the extraction/enrichment of analytes. To ensure the green and sustainable use of DELs, the researchers need to have a thorough understanding of DELs, their classification, chemistry, the nature and strength of molecular entanglements, and their tailorable features. Many researchers have declared these liquids recyclable but more attentive trials are needed to develop an authentic and straightforward DELs recycling methodology. The present review covers sound background knowledge and expert opinions about the technical definition of DELs, their classification, formation, recyclability, and tailorable features for their application as extraction solvent/sorbent in analytical chemistry.

Natural deep eutectic solvents in phytonutrient extraction and other applications

Natural deep eutectic solvents (NaDESs) are considered a new type of green solvent with attractive application prospects in many fields because of their simple preparation, low cost, environmental friendliness, low volatility, high solvency capacity, designable structure, and easy biodegradability. Due to their biocompatibility, they are safe to use and are particularly suitable for natural product applications. In recent years, NaDESs have been used to extract phytonutrients (e.g., flavonoids, saponins, polysaccharides, alkaloids, quinones, phenolic acids, volatile oils, etc.) to improve their solubility, stability, and bioavailability. This review is intended to summarize and discuss recent progress in the field of natural products related to materials and preparation methods, physicochemical properties, enhancing extraction and separation, increasing solubility, improving stability and bioavailability, facilitating oral absorption of phytonutrients, and finally, highlighting the challenge for future work.

Catalytic production and application of bio-renewable butyl butyrate as jet fuel blend- A review

Butyl butyrate (BB) derived from bio-renewable resources is the most promising jet fuel blend. This review highlights essential properties of jet fuel, including calorific value, kinematic viscosity, freezing point, flash point, auto-ignition temperature, and density to compare with different bio-renewable chemicals, which are compatible to be blended with the jet fuel. A detailed discussion follows on the importance of intermediate formation, reaction mechanism, and catalyst properties that are critical towards the production of bio-renewable resource-derived BB. BB is primarily produced via the esterification of butyric acid (BA) in butanol (BuOH) with or without using a catalyst. The corresponding reactions are carried out in both homogeneous and heterogeneous phases, provided it has acidic properties. Thus, a wide range of acidic catalysts such as [HSO₃-pmim] HSO₄ ionic liquids, heteropolyacid, methanesulfonic acid, Dowex 50 Wx8-400 resins, and sulfonated char causes up to 98%, 97.9%, 93.2%, 95.3%, and 90% of BB yield, respectively are critically reviewed. Moreover, reaction mechanism, product, and by-product formation that primarily dictate the BB yield and selectivity have been comprehensively reviewed. In addition, catalytic and mechanistic insights on BB production from other bio-renewable resources such as butyric anhydride, butyraldehyde, dibutyl ether, and methanol have been discussed in this review.

Recent Advances in the Catalytic Conversion of Biomass to Furfural in Deep Eutectic Solvents

Lignocellulose is recognized as an ideal raw material for biorefinery as it may be converted into biofuels and value-added products through a series of chemical routes. Furfural, a bio-based platform chemical generated from lignocellulosic biomass, has been identified as a very versatile alternative to fossil fuels. Deep eutectic solvents (DES) are new “green” solvents, which have been employed as green and cheap alternatives to traditional organic solvents and ionic liquids (ILs), with the advantages of low cost, low toxicity, and biodegradability, and also have been proven to be effective media for the synthesis of biomass-derived chemicals. This review summarizes the recent advances in the conversion of carbohydrates to furfural in DES solvent systems, which mainly focus on the effect of adding different catalysts to the DES system, including metal halides, water, solid acid catalyst, and certain oxides, on the production of furfural. Moreover, the challenges and perspectives of DES-assisted furfural synthesis in biorefinery systems are also discussed in this review.

The application of green solvent in a biorefinery using lignocellulosic biomass as a feedstock

The high dependence on crude oil for energy utilization leads to a necessity of finding alternative sustainable resources. Solvents are often employed in valorizing the biomass into bioproducts and other value-added chemicals during treatment stages. Unfortunately, despite the effectiveness of conventional solvents, hindrances such as expensive solvents, unfavourable environmental ramifications, and complicated downstream separation systems often occur. Therefore, the scientific community has been actively investigating more cost-effective, environmentally friendly alternatives and possess the excellent dissolving capability for biomass processing. Generally, 'green' solvents are attractive due to their low toxicity, economic value, and biodegradability. Nonetheless, green solvents are not without disadvantages due to their complicated product recovery, recyclability, and high operational cost. This review summarizes and evaluates the recent contributions, including potential advantages, challenges, and drawbacks of green solvents, namely ionic liquids, deep eutectic solvents, water, biomass-derived solvents and carbon dioxide in transforming the lignocellulosic biomass into high-value products. Moreover, research opportunities for future developments and potential upscale implementation of green solvents are also critically discussed.

Evaluation of pretreatment effect on lignin extraction from wheat straw by deep eutectic solvent

To investigate the effect of hemicellulose removal on subsequent choline chloride and lactic acid (ChCl-LA) based deep eutectic solvent (DES) extraction of wheat straw lignin, ChCL-LA of DES and hot water presoaking pretreatments were used for hemicellulose prehydrolysis. Both presoakings led to a significant hemicellulose removal and introduced morphological changes on fiber cell wall surface. DES presoaking also instigated ether bonds cleavage between lignin and hemicellulose and selectively removed lignin in compound middle lamella (CML) and cell corner (CC) leading to cell wall disruption and swelling which facilitated lignin extraction. Hot water presoaking removed more hemicellulose and caused a migration of lignin to fibers surface, but did not improve subsequent lignin extraction. This study demonstrated that a two-stage DES treatment method, presoaking at room temperature followed by extracting at an elevated temperature, is a viable process to produce high yield and purity of lignin.

Molecular and Spectroscopic Insights into a Metal Salt-Based Deep Eutectic Solvent: A Combined Quantum Theory of Atoms in Molecules, Noncovalent Interaction, and Density Functional Theory Study

Deep eutectic solvents (DESs) based on metal halide salts are highly catalytic, low toxic, reusable, cost-effective, and have higher thermal stability than their analogue ionic liquids (ILs). In this work, we have reported the formation mechanism of metal salt-based DESs at the molecular level along with their charge-transfer analysis and thermodynamics associated with their formation using density functional theory. The DES systems analyzed in the present work were choline chloride and tin(II)chloride (DES1) and choline chloride and zinc(II)chloride (DES2), both in a molar ratio of 1:2, respectively. An excellent correlation is obtained between the theoretically calculated IR spectra of the DES systems and the previously reported experimental findings for the formation of the complex systems. The DESs were found to be stable systems due to traditional hydrogen bonding and electrostatic interactions resulting in the ionic species [Sn₂Cl₅]^- and [Zn₂Cl₅]^- and are elucidated with the help of electronic structure calculations. CHELPG partial charge analysis and natural bond orbital analysis suggest a charge transfer from Cl^- (chloride) to Ch⁺ (choline) and metal salts in the DES structures. The atom-in-molecules and noncovalent interaction (NCI) analysis suggest a strong electrostatic interaction within the DES2 system as compared to DES1. Higher stability and reactivity are observed in the DES2 system based on the frontier molecular orbital analysis. Our analysis offers important insights into the formation mechanism of these economic IL analogues.

A Landscape of Lignocellulosic Biopolymer Transformations into Valuable Molecules by Heterogeneous Catalysis in C'Durable Team at IRCELYON

This review article highlights part of the research activity of the C’Durable team at IRCELYON in the field of sustainable chemistry. This review presents a landscape of the work performed on the valorization of lignocellulosic biopolymers. These studies intend to transform cellulose, hemicellulose and lignin into valuable molecules. The methodology usually consists in evaluating the behavior of the biopolymers in the absence of catalyst under various conditions (solvent, temperature), and then to assess the influence of a catalyst, most often a heterogeneous catalyst, on the reactivity. The most significant results obtained on the upgrading of cellulose and lignin, which have been mainly investigated in the team, will be presented with an opening on studies involving raw lignocellulose.

Furfural and 5-Hydroxymethylfurfural Production from Sugar Mixture Using Deep Eutectic Solvent/MIBK System

Choline chloride (ChCl) / glycolic acid (GA) deep eutectic solvent (DES) media with high water content but without any additional catalyst are introduced in furfural and 5-hydroxymethylfurfural (HMF) production. The effects of water content, reaction time, and reaction temperature are investigated with two feedstocks: a glucose/xylose mixture and birch sawdust. Based on the results, 10 equivalent quantities of water (32.9 wt.%) were revealed to be beneficial for conversions without rupturing the DES structure. The optimal reaction conditions were 160 °C and 10 minutes for the sugar mixture and 170 °C and 10 minutes for birch sawdust in a microwave reactor. High furfural yields were achieved, namely 62 % from the sugar mixture and 37.5 % from birch sawdust. HMF yields were low, but since the characterization of the solid residue of sawdust, after DES treatment, was revealed to contain only cellulose (49 %) and lignin (52 %), the treatment could be potentially utilized in a biorefinery concept where the main products are obtained from the cellulose fraction. Extraction of products into the organic phase (methyl isobutyl ketone, MIBK) during the reaction enabled the recycling of the DES phase, and yields remained high for three runs of recycling.

Pretreatment of lignocellulosic biomass: A review on recent advances

Depleting fossil reserves and growing energy needs have raised the demand for an alternative and clean energy source. The use of ubiquitously available lignocellulosic biomass for developing economic and eco-friendly large scale biorefinery applications has provided the much-needed impetus in this regard. The pretreatment process is a vital step for biomass transformation into added value products such as sugars, biofuels, etc. Different pretreatment approaches are employed to overcome the recalcitrance of lignocellulosic biomass and expedite its disintegration into individual components- cellulose, hemicellulose, and lignin. The conventional pretreatment methods lack sustainability and practicability for industrial scale up. The review encompasses the recent advances in selective physical and chemical pretreatment approaches such as milling, extrusion, microwave, ammonia fibre explosion, eutectic solvents etc. The study will allow a deeper understanding of these pretreatment processes and increase their scope as sustainable technologies for developing modern biorefineries.

Insights into the relationships between physicochemical properties, solvent performance, and applications of deep eutectic solvents

Deep eutectic solvent (DES) is regarded as a new generation of green solvent due to its distinctive and tailorable physicochemical properties, such as low volatility, strong solubility, biodegradability, low-cost, environment-friendly, and feasibility of the structural design. As an alternative to traditional organic solvents and ionic liquids (ILs), DESs have been widely applied in many fields, such as organic chemical synthesis, electrochemical deposition, material preparation, biomass catalytic conversion, extraction and separation, detection and analysis, nanotechnology, gas absorption, and drug delivery. In this paper, through in-depth discussion on factors influencing the physicochemical properties of DESs, we summarized the relations between their composition, structure, and performance. Focusing on their solvent performance, we analyzed the latest research results of DESs with different physicochemical properties in various fields. It should be pointed out that designing and synthesizing DESs from the molecular structure aspect to regulate their physicochemical properties is the direction of accurately developing new functional applications of DESs.

The Pretreatment of Lignocelluloses With Green Solvent as Biorefinery Preprocess: A Minor Review

Converting agriculture and forestry lignocellulosic residues into high value-added liquid fuels (ethanol, butanol, etc.), chemicals (levulinic acid, furfural, etc.), and materials (aerogel, bioresin, etc.) via a bio-refinery process is an important way to utilize biomass energy resources. However, because of the dense and complex supermolecular structure of lignocelluloses, it is difficult for enzymes and chemical reagents to efficiently depolymerize lignocelluloses. Strikingly, the compact structure of lignocelluloses could be effectively decomposed with a proper pretreatment technology, followed by efficient separation of cellulose, hemicellulose and lignin, which improves the conversion and utilization efficiency of lignocelluloses. Based on a review of traditional pretreatment methods, this study focuses on the discussion of pretreatment process with recyclable and non-toxic/low-toxic green solvents, such as polar aprotic solvents, ionic liquids, and deep eutectic solvents, and provides an outlook of the industrial application prospects of solvent pretreatment.

Earth-abundant 3d-transition-metal catalysts for lignocellulosic biomass conversion

Transformation of biomass to chemicals and fuels is a long-term goal in both science and industry. However, high cost is one of the major obstacles to the industrialization of this sustainable technology. Thus, developing catalysts with high activity and low-cost is of great importance for biomass conversion. The last two decades have witnessed the increasing achievement of the use of earth-abundant 3d-transition-metals in catalysis due to their low-cost, high efficiency and excellent stability. Here, we aim to review the fast development and recent advances of 3d-metal-based catalysts including Cu, Fe, Co, Ni and Mn in lignocellulosic biomass conversion. Moreover, present research trends and invigorating perspectives on future development are given.

Catalytic Conversion of Biomass to Furanic Derivatives with Deep Eutectic Solvents

Biomass is the only renewable organic carbon resource in nature, and the transformation of abundant biomass into various chemicals has received immense spotlight. As a novel generation of designer solvents, deep eutectic solvents (DESs) have been widely used in biorefinery due to their excellent properties including low cost, easy preparation, and biodegradability. Although there have been some reports summarizing the performance of DESs for the transformation of biomass into various chemicals, few Reviews illuminate the relationship between the functional structure of DESs and catalytic conversion of biomass. Hence, this Minireview comprehensively summarizes the effects of the types of functional groups in DESs on catalytic conversion of biomass into furanic derivatives, such as carboxylic acid-based hydrogen-bond donors (HBDs), carbohydrate-based HBDs, polyalcohol-based HBDs, amine/amide-based HBDs, spatial structure of HBDs, and various hydrogen-bond acceptors (HBAs). It also further summarizes the effects of adding different additives into the DESs on the synthesis of high value-added chemicals, including water, liquid inorganic acids, Lewis acids, heteropoly acids, and typical solid acids. Moreover, current challenges and prospects for the application of DESs in biomass conversion are provided.

New deep eutectic solvent assisted extraction of highly pure lignin from maritime pine sawdust (Pinus pinaster Ait.)

Lignocellulosic biomass is a renewable and sustainable feedstock, mainly composed of cellulose, hemicellulose, and lignin. Lignin, as the most abundant natural aromatic polymer occurring on Earth, has great potential to produce value-added products. However, the isolation of highly pure lignin from biomass requires the use of efficient methods during lignocellulose fractionation. Therefore, in this work, novel acidic deep eutectic solvents (DESs) were prepared, characterized and screened for lignin extraction from maritime pine wood (Pinus pinaster Ait.) sawdust. The use of cosolvents and the development of new DES were also evaluated regarding their extraction and selectivity performance. The results show that an 1 h extraction process at 175 °C, using a novel DES composed of lactic acid, tartaric acid and choline chloride, named Lact:Tart:ChCl, in a molar ratio of 4:1:1, allows the recovery of 95 wt% of the total lignin present in pine biomass with a purity of 89 wt%. Such superior extraction of lignin with remarkable purity using a "green" solvent system makes this process highly appealing for future large-scale applications.

Green Deep Eutectic Solvents for Microwave-Assisted Biomass Delignification and Valorisation

Aiming to fulfil the sustainability criteria of future biorefineries, a novel biomass pretreatment combining natural deep eutectic solvents (NaDESs) and microwave (MW) technology was developed. Results showed that NaDESs have a high potential as green solvents for lignin fractionation/recovery and sugar release in the following enzymatic hydrolysis. A new class of lignin derived NaDESs (LigDESs) was also investigated, showing promising effects in wheat straw delignification. MW irradiation enabled a fast pretreatment under mild condition (120 °C, 30 min). To better understand the interaction of MW with these green solvents, the dielectric properties of NaDESs were investigated. Furthermore, a NaDES using the lignin recovered from biomass pretreatment as hydrogen bond donor was prepared, thus paving the way for a “closed-loop” biorefinery process.

Green solvent pretreatment for enhanced production of sugars and antioxidative lignin from poplar

A promising pretreatment mediated by biomass-derived deep eutectic solvent (DES) with choline chloride to lactic acid was implemented to overcome the recalcitrant structure of poplar sawdust for effective enzymatic hydrolysis and valorized lignin. Results showed the DES applied was strongly selective towards removal of lignin and xylan while preserving cellulose. Under the optimal pretreatment condition (DES ratio: 1:2, temperature: 130 °C, time:1.5 h), the glucose yield from enzymatic hydrolysis was 75.8%. Chemical and structure changes of recovered lignin were evaluated to gauge its valorization potential. It indicated that the recovered lignin possessed molecular weight (4000-6000 g/mol), low polydispersity (PDI < 2.0), low quantity of β-aryl-ethers with no recondensation, and an abundance of phenolic OH groups. The excellent antioxidant capacity of lignin demonstrated its great value as a polyphenolic antioxidant. Overall, this work demonstrated an emerging biorefinery technology method for effective fractionation and valorization of lignocellulosic biomass.

Deep Eutectic Solvents as Catalysts for Upgrading Biomass

Deep eutectic solvents (DESs) have emerged as promising green solvents, due to their versatility and properties such as high biodegradability, inexpensiveness, ease of preparation and negligible vapor pressure. Thus, DESs have been used as sustainable media and green catalysts in many chemical processes. On the other hand, lignocellulosic biomass as an abundant source of renewable carbon has received ample interest for the production of biobased chemicals. In this review, the state of the art of the catalytic use of DESs in upgrading the biomass-related substances towards biofuels and value-added chemicals is presented, and the gap in the knowledge is indicated to direct the future research.

Comprehensive utilization of corncob for furfuryl alcohol production by chemo-enzymatic sequential catalysis in a biphasic system

A new process for the production of furfuryl alcohol from corncob was constructed by using deep eutectic solvents and whole cell catalysis in this paper. Firstly, the corncob was treated with deep eutectic solvents to convert the xylan into furfural, and then the pretreated corncob residue was enzymatically hydrolyzed to obtain a glucose-rich enzymatic hydrolysate, which was used to provide NADH for Bacillus coagulans NL01 during the process of furfural reduction. The furfural yield could reach 46% using the selected choline chloride-oxalic acid as catalysts and corncob as substrate under the optimized catalytic condition at 120 °C for 30 min. The final furfuryl alcohol yield of 20.7% was achieved with corncob as substrate. Moreover, this catalytic system realized the recycling of deep eutectic solvents three times, the high-value production of furfuryl alcohol, and the comprehensive utilization of corncob.

Deep Eutectic Solvents: A Review of Fundamentals and Applications

Deep eutectic solvents (DESs) are an emerging class of mixtures characterized by significant depressions in melting points compared to those of the neat constituent components. These materials are promising for applications as inexpensive "designer" solvents exhibiting a host of tunable physicochemical properties. A detailed review of the current literature reveals the lack of predictive understanding of the microscopic mechanisms that govern the structure-property relationships in this class of solvents. Complex hydrogen bonding is postulated as the root cause of their melting point depressions and physicochemical properties; to understand these hydrogen bonded networks, it is imperative to study these systems as dynamic entities using both simulations and experiments. This review emphasizes recent research efforts in order to elucidate the next steps needed to develop a fundamental framework needed for a deeper understanding of DESs. It covers recent developments in DES research, frames outstanding scientific questions, and identifies promising research thrusts aligned with the advancement of the field toward predictive models and fundamental understanding of these solvents.

Enhancing the Thermostability of Papain by Immobilizing on Deep Eutectic Solvents-Treated Chitosan With Optimal Microporous Structure and Catalytic Microenvironment

Deep eutectic solvents (DESs) have attracted an increasing attention in the fields of biocatalysis and biopolymer processing. In this study, papain immobilized on choline chloride- lactic acid (ChCl-Lac) DES-treated chitosan exhibited excellent thermostability as compared to the free enzyme. The properties of native or DES-treated chitosan and immobilized enzyme were characterized by FT-IR, SEM, surface area and pore property analysis. Like the common enzyme immobilization, papain immobilized on DES-treated chitosan resulted in a lower catalytic efficiency and a higher thermostability than the free enzyme due to the restricted diffusion. The results also revealed that DES could control the active group content, thus achieving the appropriate microporous structure of immobilized enzyme. Meanwhile, it could also help to construct the optimal microenvironment by hydrogen-bonding interaction between enzyme, chitosan, and residual DES, which are benefit for maintaining an active conformation and subsequently a high thermostability of papain. Moreover, it was found that trace DES (10 mM) significantly promoted the activity of free papain (145%). Deactivation thermodynamics study showed that the DES could enhance the thermostability of papain especially at high temperature (half-life of 7.4 vs. 3.5 h) because of the increased Gibbs free energy of denaturation. Secondary structure analysis by circular dichroism spectroscopy (CD) agreed well with the activity and thermostability data, further confirming the formation of rigid conformation induced by a specific amount of DES. This work provides a new way of enzyme immobilization synergistically intensified by solvents and supporting materials to achieve better microporous structure and catalytic microenvironment.

A review of sustainable lignocellulose biorefining applying (natural) deep eutectic solvents (DESs) for separations, catalysis and enzymatic biotransformation processes

Conventional biorefinery processes are complex, engineered and energy-intensive, where biomass fractionation, a key functional step for the production of biomass-derived chemical substances, demands industrial organic solvents and harsh, environmentally harmful reaction conditions. There is a timely, clear and unmet economic need for a systematic, robust and affordable conversion method technology to become greener, sustainable and cost-effective. In this perspective, deep eutectic solvents (DESs) have been envisaged as the most advanced novel polar liquids that are entirely made of natural, molecular compounds that are capable of an association via hydrogen bonding interactions. DES has quickly emerged in various application functions thanks to a formulations’ simple preparation. These molecules themselves are biobased, renewable, biodegradable and eco-friendly. The present experimental review is providing the state of the art topical overview of trends regarding the employment of DESs in investigated biorefinery-related techniques. This review covers DESs for lignocellulosic component isolation, applications as (co)catalysts and their functionality range in biocatalysis. Furthermore, a special section of the DESs recyclability is included. For DESs to unlock numerous new (reactive) possibilities in future biorefineries, the critical estimation of its complexity in the reaction, separation, or fractionation medium should be addressed more in future studies.

Sequential pretreatment with alkaline hydrogen peroxide and choline chloride:copper (II) chloride dihydrate - Synergistic fractionation of oil palm fronds

In this study, a novel Type II deep eutectic solvent (DES) namely, choline chloride:copper(II) chloride dihydrate (ChCl:CuCl₂·2H₂O) was used to pretreat oil palm fronds (OPFs). The sequential pretreatment with alkaline hydrogen peroxide (0.25 vol%, 90 min) at ambient conditions and a Type II DES (90 °C, 3 h) at a later stage resulted in a delignification of 55.14% with high xylan (80.79%) and arabinan (98.02%) removals. The characterizations of pretreated OPFs confirmed the excellent performance of DES in OPF fractionation. Thus, the application of a Type II DES at ambient pressure and relatively lower temperature was able to improve the lignin and hemicellulose removals from OPFs.

Freeze Concentration of Aqueous [DBNH][OAc] Ionic Liquid Solution

In the present work, freeze crystallization studies, as a novel concentration method for aqueous 1,5-diazabicyclo[4.3.0]non-5-enium acetate ([DBNH][OAc]) ionic liquid solution, were conducted. In order to find the appropriate temperature and composition range for freeze crystallization, the solid–liquid equilibrium of a binary [DBNH][OAc]–water compound system was investigated with differential scanning calorimetry (DSC). Results of this analysis showed that the melting temperature of the pure ionic liquid was 58 ℃, whereas the eutectic temperature of the binary compound system was found to be −73 ℃. The activity coefficient of water was determined based on the freezing point depression data obtained in this study. In this study, the lowest freezing point was −1.28 ℃ for the aqueous 6 wt.% [DBNH][OAc] solution. Ice crystal yield and distribution coefficient were obtained for two types of aqueous solutions (3 wt.% and 6 wt.% [DBNH][OAc]), and two freezing times (40 min and 60 min) were used as the main parameters to compare the two melt crystallization methods: static layer freeze and suspension freeze crystallization. Single-step suspension freeze crystallization resulted in higher ice crystal yields and higher ice purities when compared with the single-step static layer freeze crystallization. The distribution coefficient values obtained showed that the impurity ratios in ice and in the initial solution for suspension freeze crystallization were between 0.11 and 0.36, whereas for static layer freeze crystallization these were between 0.28 and 0.46. Consequently, suspension freeze crystallization is a more efficient low-energy separation method than layer freeze crystallization for the aqueous-ionic liquid solutions studied and, therefore, this technique can be applied as a concentration method for aqueous-ionic liquid solutions.

Deep eutectic solvent for lignocellulosic biomass fractionation and the subsequent conversion to bio-based products - A review

Since the introduction of deep eutectic solvent (DES) in biomass processing field, the efficiency of DES in lignocellulosic biopolymer model compounds' (cellulose, hemicellulose and lignin) solubilisation and conversion was widely recognized. Nevertheless, DES's potential for biorefinery application can be reflected more accurately through their performance in raw lignocellulosic biomass processing rather than model compound conversion. Therefore, this review examines the studies on raw lignocellulosic biomass fractionation using DES and the subsequent conversion of DES-fractionated products into bio-based products. The review stresses on three key parts: performance of varying types of DESs and pretreatment schemes for biopolymer fractionation, properties and conversion of fractionated saccharides as well as DES-extracted lignin. The prospects and challenges of DES implementation in biomass processing will also be discussed. This review provides a front-to-end view on the DES's performance, starting from pretreatment to DES-fractionated products conversion, which would be helpful in devising a comprehensive biomass utilization process.