Oxidovanadium(V) Complexes Anchored on Carbon Materials as Catalysts for the Oxidation of 1-Phenylethanol

Vanadium(V) complexes derived from triphenylphosphonium and hydrazides: cytotoxicity evaluation and interaction with biomolecules

The development of coordination compounds with antineoplastic therapeutic properties is currently focused on non-covalent interactions with deoxyribonucleic acid (DNA). Additionally, the interaction profiles of these compounds with globular plasma proteins, particularly serum albumin, warrant thorough evaluation. In this study, we report on the interactions between biomolecules and complexes featuring hydrazone-type imine ligands coordinated with vanadium. The potential to enhance the therapeutic efficiency of these compounds through mitochondrial targeting is explored. This targeting is facilitated by the derivatization of ligands with triphenylphosphonium groups. Thus, this work presents the synthesis, characterization, interactions, and cytotoxicity of dioxidovanadium(V) complexes (C1-C5) with a triphenylphosphonium moiety. These VV-species are coordinated to hydrazone-type iminic ligands derived from (3-formyl-4-hydroxybenzyl)triphenylphosphonium chloride ([AH]Cl) and aromatic hydrazides ([H2L1]Cl-[H2L5]Cl). The structures of the five complexes were elucidated through single-crystal X-ray diffraction and vibrational spectroscopies, confirming the presence of dioxidovanadium(V) species in various geometries with degrees of distortion (τ = 0.03-0.50) and highlighting their zwitterionic characteristics. The molecular structural stability of C1-C5 in solution was ascertained using 1H, 19F, 31P, and 51V-nuclear magnetic resonance. Moreover, their interactions with biomolecules were evaluated using diverse spectroscopic methodologies and molecular docking, indicating moderate interactions (Kb ≈ 104 M-1) with calf thymus DNA in the minor groove and with human serum albumin, predominantly in the superficial IB subdomain. Lastly, the cytotoxic potentials of these complexes were assessed in keratinocytes of the HaCaT lineage, revealing that C1-C5 induce a reduction in metabolic activity and cell viability through apoptotic pathways.

Ionic Dioxidovanadium(V) Complexes with Schiff-Base Ligands as Potential Insulin-Mimetic Agents-Substituent Effect on Structure and Stability

Four dioxidovanadium(V) complexes with Schiff-base ligands based on 2-hydroxybenzhydrazide with four different substituted salicylaldehydes (5-chlorosalicylaldehyde, 3,5-dichlorosalicylaldehyde, 5-nitrosalicylaldehyde, 3-bromo-5-chlorosalicylaldehyde) were synthesized and described, by using V₂O₅ and triethylamine. The single crystal X-ray structure measurements as well as elemental analyses and IR spectra confirmed the formulas of the ionic complexes with a protonated triethylamine acting as counterion, HTEA[VO₂(L)] (HL = Schiff-base ligand). The kinetic stability of the complexes at pH = 2 and 7 was discussed with respect to the neutral vanadium(V) complexes previously studied as potential insulin-mimetic agents. A correlation between the substituents in an aromatic ring of the Schiff-base ligands with crystal packing, and also with the stability of the compounds, was presented.

Commercial Gold Complexes Supported on Functionalised Carbon Materials as Efficient Catalysts for the Direct Oxidation of Ethane to Acetic Acid

The single-pot efficient oxidation of ethane to acetic acid catalysed by Au(I) or Au(III) compounds, chlorotriphenylphosphinegold(I) (1), chlorotrimethylphosphinegold(I) (2), 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidenegold(I) chloride (3), dichloro(2-pyridinecarboxylato)gold(III) (4), homogenous and supported on different carbon materials: activated carbon (AC), multi-walled carbon nanotubes (CNT) and carbon xerogel (CX), oxidised with nitric acid followed by treatment with NaOH (-ox-Na), is reported. The reactions were performed in water/acetonitrile. The materials were selective for the production of acetic acid, with no trace of by-products being detected. The best homogenous catalysts were complexes 2 and 3 which showed the highest ethane conversion and an acetic acid yield of ca. 21%, followed by 4 and 1. The heterogenised materials showed much better activity than the homogenous counterparts, with acetic acid yields up to 41.4% for 4@CNT-ox-Na, and remarkable selectivity (with acetic acid being the only product detected). The heterogenised catalysts with the best results were reused up to five cycles, with no significant loss of activity, and maintaining high selectivity for acetic acid. 4@CNT-ox-Na showed not only the best catalytic activity but also the best stability during the recycling runs.

Synthesis of a Novel Series of Cu(I) Complexes Bearing Alkylated 1,3,5-Triaza-7-phosphaadamantane as Homogeneous and Carbon-Supported Catalysts for the Synthesis of 1- and 2-Substituted-1,2,3-triazoles

The N-alkylation of 1,3,5-triaza-7-phosphaadamantane (PTA) with ortho-, meta- and para-substituted nitrobenzyl bromide under mild conditions afforded three hydrophilic PTA ammonium salts, which were used to obtain a new set of seven water-soluble copper(I) complexes. The new compounds were fully characterized and their catalytic activity was investigated for the low power microwave assisted one-pot azide-alkyne cycloaddition reaction in homogeneous aqueous medium to obtain disubstituted 1,2,3-triazoles. The most active catalysts were immobilized on activated carbon (AC), multi-walled carbon nanotubes (CNT), as well as surface functionalized AC and CNT, with the most efficient support being the CNT treated with nitric acid and NaOH. In the presence of the immobilized catalyst, several 1,4-disubstituted-1,2,3-triazoles were obtained from the reaction of terminal alkynes, organic halides and sodium azide in moderate yields up to 80%. Furthermore, the catalyzed reaction of terminal alkynes, formaldehyde and sodium azide afforded 2-hydroxymethyl-2H-1,2,3-triazoles in high yields up to 99%. The immobilized catalyst can be recovered and recycled through simple workup steps and reused up to five consecutive cycles without a marked loss in activity. The described catalytic systems proceed with a broad substrate scope, under microwave irradiation in aqueous medium and according to "click rules".

Oxido- and Dioxido-Vanadium(V) Complexes Supported on Carbon Materials: Reusable Catalysts for the Oxidation of Cyclohexane

Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.

The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles

A set of Cu(I) complexes with 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo-[3.3.1]nonane (DAPTA) phosphine ligands viz. [CuX(κP-DAPTA)3] (1: X = Br; 2: X = I) and [Cu(μ-X)(κP-DAPTA)2]2 (3: X = Br; 4: X = I) were immobilized on activated carbon (AC) and multi-walled carbon nanotubes (CNT), as well as on these materials after surface functionalization. The immobilized copper(I) complexes have shown favorable catalytic activity for the one-pot, microwave-assisted synthesis of 1,2,3-triazoles via the azide-alkyne cycloaddition reaction (CuAAC). The heterogenized systems with a copper loading of only 1.5–1.6% (w/w relative to carbon), established quantitative conversions after 15 min, at 80 °C, using 0.5 mol% of catalyst loading (relative to benzyl bromide). The most efficient supports concerning heterogenization were CNT treated with nitric acid and NaOH, and involving complexes 2 and 4 (in the same order, 2_CNT-ox-Na and 4_CNT-ox-Na). The immobilized catalysts can be recovered and recycled by simple workup and reused up to four consecutive cycles although with loss of activity.

Fe(III) Complexes in Cyclohexane Oxidation: Comparison of Catalytic Activities under Different Energy Stimuli

In this study, the mononuclear Fe(III) complex [Fe(HL)(NO3)(H2O)2]NO3 (1) derived from Nʹ-acetylpyrazine-2-carbohydrazide (H2L) was synthesized and characterized by several physicochemical methods, e.g., elemental analysis, infrared (IR) spectroscopy, electrospray ionization mass spectrometry (ESI-MS), and single crystal X-ray diffraction analysis. The catalytic performances of 1 and the previously reported complexes [Fe(HL)Cl2] (2) and [Fe(HL)Cl(μ-OMe)]2 (3) towards the peroxidative oxidation of cyclohexane under three different energy stimuli (microwave irradiation, ultrasound, and conventional heating) were compared. 1-3 displayed homogeneous catalytic activity, leading to the formation of cyclohexanol and cyclohexanone as final products, with a high selectivity for the alcohol (up to 95%). Complex 1 exhibited the highest catalytic activity, with a total product yield of 38% (cyclohexanol + cyclohexanone) under optimized microwave-assisted conditions.

1D Copper(II)-Aroylhydrazone Coordination Polymers: Magnetic Properties and Microwave Assisted Oxidation of a Secondary Alcohol

The 1D Cu(II) coordination polymers [Cu₃(L¹)(NO₃)₄(H₂O)₂]_n (1) and [Cu₂(H₂L²)(NO₃)(H₂O)₂]_n(NO₃)_n (2) have been synthesized using the aroylhyrazone Schiff bases N'¹,N'²-bis(pyridin-2-ylmethylene)oxalohydrazide (H₂L¹) and N'¹,N'³-bis(2-hydroxybenzylidene)malonohydrazide (H₄L²), respectively. They have been characterized by elemental analysis, infrared (IR) spectroscopy, UV-Vis spectroscopy, electrospray ionization mass spectrometry (ESI-MS), single crystal X-ray diffraction and variable temperature magnetic susceptibility measurements (for 2). The ligand (L¹)²⁻ coordinates in the iminol form in 1, whereas the amide coordination is observed for (H₂L²)²⁻ in 2. Either the ligand bridge or the nitrate bridge in 2 mediates weak antiferromagnetic coupling. The catalytic performance of 1 and 2 has been investigated toward the solvent-free microwave-assisted oxidation of a secondary alcohol (1-phenylethanol used as model substrate). At 120°C and in the presence of the nitroxyl radical 2,2,6,6-tetramethylpiperydil-1-oxyl (TEMPO), the complete conversion of 1-phenylethanol into acetophenone occurs with TOFs up to 1,200 h⁻¹.

Cd(ii) coordination compounds as heterogeneous catalysts for microwave-assisted peroxidative oxidation of toluene and 1-phenylethanol

Cd(ii) compounds as catalysts towards microwave assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of toluene and 1-phenylethanol under heterogeneous conditions are explored.

Cu(II) and Fe(III) Complexes Derived from N-Acetylpyrazine-2-Carbohydrazide as Efficient Catalysts Towards Neat Microwave Assisted Oxidation of Alcohols

The mononuclear Cu(II) complex [Cu((kNN′O-HL)(H2O)2] (1) was synthesized using N-acetylpyrazine-2-carbohydrazide (H2L) and characterized by elemental analysis, IR spectroscopy, ESI-MS and single crystal X-ray crystallography. Two Fe(III) complexes derived from the same ligand viz, mononuclear [Fe((kNN′O-HL)Cl2] (2) and the binuclear [Fe(kNN′O-HL)Cl(μ-OMe)]2 (3) (synthesized as reported earlier), were also used in this study. The catalytic activity of these three complexes (1–3) was examined towards the oxidation of alcohols using tert-butyl hydroperoxide (TBHP) as oxidising agent under solvent-free microwave irradiation conditions. Primary and secondary benzyl alcohols (benzyl alcohol and 1-phenylethanol), and secondary aliphatic alcohols (cyclohexanol) were used as model substrates for this study. A comparison of their catalytic efficiency was performed. Complex 1 exhibited the highest activity in the presence of TEMPO as promoter for the oxidation of 1-phenylethanol with a maximum yield of 91.3% of acetophenone.

Organic Solvent-Free Olefins and Alcohols (ep)oxidation Using Recoverable Catalysts Based on [PM12O40]3- (M = Mo or W) Ionically Grafted on Amino Functionalized Silica Nanobeads

Catalyzed organic solvent-free (ep)oxidation were achieved using H3PM12O40 (M = Mo or W) complexes ionically grafted on APTES-functionalized nano-silica beads obtained from straightforward method (APTES = aminopropyltriethoxysilane). Those catalysts have been extensively analyzed through morphological studies (Dynamic Light Scattering (DLS), TEM) and several spectroscopic qualitative (IR, multinuclear solid-state NMR) and quantitative (1H and 31P solution NMR) methods. Interesting catalytic results were obtained for the epoxidation of cyclooctene, cyclohexene, limonene and oxidation of cyclohexanol with a lower [POM]/olefin ratio. The catalysts were found to be recyclable and reused during three runs with similar catalytic performances.

Synthesis and Structure of Copper Complexes of a N6O4 Macrocyclic Ligand and Catalytic Application in Alcohol Oxidation

Reactions between N6O4 macrocyclic 1,4,19,22,25,40-hexaaza-10,13,31,34-tetraoxa-6,14,27,35(1,4)-tetrabenzenacyclopentacontane (L) and several copper salts (viz. trifuoromethane and toluene sulfonates, nitrate, perchlorate, benzoate, and acetate) led to the formation of dinuclear compounds [Cu2(OSO2CF3)2(DMF)2L](SO3CF3)2 (1), [Cu2(p-OSO2C6H4Me)2L(DMF)2](SO3C6H4Me)2 (2), [Cu2(ONO2)2L(DMF)2](NO3)2 (3), [Cu2(OClO3)2(DMF)2L](ClO4)2 (4), [Cu2(OOCPh)2L(H2O)2](O2CPh)2 (5), and [Cu2(OOCMe)4L] (6), which were characterized by IR, elemental analysis and TG-DTA (thermogravimetric-differential thermal analysis), as well as by single-crystal X-ray diffraction, EPR (electron paramagnetic resonance) spectroscopy, and electrochemical techniques (cyclic voltammetry and controlled potential electrolysis). The molecular structures of compounds 1–6 reveal a considerable conformational flexibility of the ligand L, which allowed its readjustment for the formation of the metal compounds and confirmed the presence of dinuclear endo macrocyclic species. In every case, the L ligand coordinates to each copper cation via three nitrogen atoms, with the remaining coordination positions of the metal square pyramid environment being accomplished by neutral or anionic ligands. The macrocyclic cavities appear to be adequate for the enclosure of a neutral species as proved by compound 6 with 1,4-dioxane. The compounds, in combination with the TEMPO (2,2,6,6-tetramethyl-piperidinyloxyl) radical and in alkaline aqueous solution, act as efficient catalysts in the aerobic oxidation of different alcohols to the corresponding aldehydes (yields up to 99% and TON up 232) after 20 h at 70 °C. In addition, the microwave-assisted solvent-free peroxidative oxidation (by tert-butylhydroperoxide, TBHP) of 1-phenylethanol led to acetophenone yields up to 99% and TOF of 1.1 × 103 after 0.5 h, without any additive.

New thiosemicarbazide and dithiocarbazate based oxidovanadium(iv) and dioxidovanadium(v) complexes. Reactivity and catalytic potential

The new thiosemicarbazide and dithiocarbazate based vanadium complexes show remarkable catalytic potential for oxidation of alcohols and simple arenes.

Vanadium complexes of different nuclearities in the catalytic oxidation of cyclohexane and cyclohexanol – an experimental and theoretical investigation

Catalytic activities of oxidovanadium(v) complexes towards microwave-assisted peroxidative oxidation of cyclohexane and cyclohexanol are explored by experimental and DFT calculations.

Gold Nanoparticles Deposited on Surface Modified Carbon Xerogels as Reusable Catalysts for Cyclohexane C-H Activation in the Presence of CO and Water

The use of gold as a promotor of alkane hydrocarboxylation is reported for the first time. Cyclohexane hydrocarboxylation to cyclohexanecarboxylic acid (up to 55% yield) with CO, water, and peroxodisulfate in a water/acetonitrile medium at circa 50 °C has been achieved in the presence of gold nanoparticles deposited by a colloidal method on a carbon xerogel in its original form (CX), after oxidation with HNO₃ (-ox), or after oxidation with HNO₃ and subsequent treatment with NaOH (-ox-Na). Au/CX-ox-Na behaves as re-usable catalyst maintaining its initial activity and selectivity for at least seven consecutive cycles. Green metric values of atom economy or carbon efficiency also attest to the improvement brought by this novel catalytic system to the hydrocarboxylation of cyclohexane.