Mechanisms of Two-Electron versus Four-Electron Reduction of Dioxygen Catalyzed by Earth-Abundant Metal Complexes

General Design Concept of High-Performance Single-Atom-Site Catalysts for H2O2 Electrosynthesis

Hydrogen peroxide (H2O2) as a green oxidizing agent is widely used in various fields. Electrosynthesis of H2O2 has gradually become a hotspot due to its convenient and environment-friendly features. Single-atom-site catalysts (SASCs) with uniform active sites are the ideal catalysts for the in-depth study of the reaction mechanism and structure-performance relationship. In this review, the outstanding achievements of SASCs in the electrosynthesis of H2O2 through 2e- oxygen reduction reaction (ORR) and 2e- water oxygen reaction (WOR) in recent years, are summarized. First, the elementary steps of the two pathways and the roles of key intermediates (*OOH and *OH) in the reactions are systematically discussed. Next, the influence of the size effect, electronic structure regulation, the support/interfacial effect, the optimization of coordination microenvironments, and the SASCs-derived catalysts applied in 2e- ORR are systematically analyzed. Besides, the developments of SASCs in 2e- WOR are also overviewed. Finally, the research progress of H2O2 electrosynthesis on SASCs is concluded, and an outlook on the rational design of SASCs is presented in conjunction with the design strategies and characterization techniques.

π-Extended nonplanar cobalt porphyrins immobilized on MWCNTs as efficient electrocatalysts for selective oxygen reduction reaction

Two π-extended cobalt porphyrins are synthesized and one of them is crystallographically characterized. The nanocomposites of nonplanar (curved) porphyrin immobilized multi-walled carbon nanotubes were thoroughly characterized spectroscopically and microscopically, showing ∼200 mV positive shift in the O2 reduction peak potential in aqueous media and ∼100 mV shift in the onset potential of the O2 reduction relative to the control meso-tetraphenylporphyrinatocobalt(II) nanocomposite. Both the π-extended cobalt porphyrin immobilized nanocomposites efficiently catalyze selective 4e-/4H+ O2 reduction under ambient conditions with excellent methanol tolerance and high stability due to effective π-π interactions, and could be an alternative for expensive Pt-based cathode materials in fuel cells.

Tuning the Pyridine Units in Vinylene-Linked Covalent Organic Frameworks Boosting 2e- Oxygen Reduction Reaction

The N-doped carbon materials are supposed to be the efficient oxygen reduction reaction (ORR) catalysts with the undefined N-doped carbon ring groups. It is essential to well define the role of the nitrogen atoms of these carbon structures in active behavior. Even though, the covalent organic frameworks (COFs) with precise structures are well developed, but unable to exclude the polar linkages influence. This study presents a series of pyridine-containing COFs linked via nonpolar carbon-carbon double bonds (C = C). Their catalytic activity and selectivity for 2e- ORR are successfully modulated by locating the embedded pyridine nitrogen in the backbones through the linking modes of pyridine moieties within the frameworks. Such phenomena can be attributed to their different binding abilities toward O2 , leading to the different binding strength of the intermediate OH* to the catalytic sites, also verified by the theoretical calculation. This work provides us a new insight to design high-efficiency ORR catalysts through the exact location of pyridine nitrogen.

Selective Four-Electron Reduction of Oxygen by a Nonheme Heterobimetallic CuFe Complex

We report herein the first nonheme CuFe oxygen reduction catalyst ([CuII (bpbp)(μ-OAc)2 FeIII ]2+ , CuFe-OAc), which serves as a functional model of cytochrome c oxidase and can catalyze oxygen reduction to water with a turnover frequency of 2.4×103  s-1 and selectivity of 96.0 % in the presence of Et3 NH+ . This performance significantly outcompetes its homobimetallic analogues (2.7 s-1 of CuCu-OAc with %H2 O2 selectivity of 98.9 %, and inactive of FeFe-OAc) under the same conditions. Structure-activity relationship studies, in combination with density functional theory calculation, show that the CuFe center efficiently mediates O-O bond cleavage via a CuII (μ-η1  : η2 -O2 )FeIII peroxo intermediate in which the peroxo ligand possesses distinctive coordinating and electronic character. Our work sheds light on the nature of Cu/Fe heterobimetallic cooperation in oxygen reduction catalysis and demonstrates the potential of this synergistic effect in the design of nonheme oxygen reduction catalysts.

Four-Electron Reduction of O2 Using Distibines in the Presence of ortho-Quinones

This study, which aims to identify atypical platforms for the reduction of dioxygen, describes the reaction of O2 with two distibines, namely, 4,5-bis(diphenylstibino)-2,7-di-tert-butyl-9,9-dimethylxanthene and 4,5-bis(diphenylstibino)-2,7-di-tert-butyl-9,9-dimethyldihydroacridine, in the presence of an ortho-quinone such as phenanthraquinone. The reaction proceeds by oxidation of the two antimony atoms to the + V state in concert with reductive cleavage of the O2 molecule. As confirmed by 18O labeling experiments, the two resulting oxo units combine with the ortho-quinone to form an α,α,β,β-tetraolate ligand that bridges the two antimony(V) centers. This process, which has been studied both experimentally and computationally, involves the formation of asymmetric, mixed-valent derivatives featuring a stibine as well as a catecholatostiborane formed by oxidative addition of the quinone to only one of the antimony centers. Under aerobic conditions, the catecholatostiborane moiety reacts with O2 to form a semiquinone/peroxoantimony intermediate, as supported by NMR spectroscopy in the case of the dimethyldihydroacridine derivative. These intermediates swiftly evolve into the symmetrical bis(antimony(V)) α,α,β,β-tetraolate complexes via low barrier processes. Finally, the controlled protonolysis and reduction of the bis(antimony(V)) α,α,β,β-tetraolate complex based on the 9,9-dimethylxanthene platform have been investigated and shown to regenerate the starting distibine and the ortho-quinone. More importantly, these last reactions also produce two equivalents of water as the product of O2 reduction.

Recent Advances of Electrocatalyst and Cell Design for Hydrogen Peroxide Production

Electrochemical synthesis of H2O2 via a selective two-electron oxygen reduction reaction has emerged as an attractive alternative to the current energy-consuming anthraquinone process. Herein, the progress on electrocatalysts for H2O2 generation, including noble metal, transition metal-based, and carbon-based materials, is summarized. At first, the design strategies employed to obtain electrocatalysts with high electroactivity and high selectivity are highlighted. Then, the critical roles of the geometry of the electrodes and the type of reactor in striking a balance to boost the H2O2 selectivity and reaction rate are systematically discussed. After that, a potential strategy to combine the complementary properties of the catalysts and the reactor for optimal selectivity and overall yield is illustrated. Finally, the remaining challenges and promising opportunities for high-efficient H2O2 electrochemical production are highlighted for future studies.

Co-based Catalysts for Selective H2 O2 Electroproduction via 2-electron Oxygen Reduction Reaction

Electrochemical production of hydrogen peroxide (H₂ O₂ ) via two-electron oxygen reduction reaction (ORR) process is emerging as a promising alternative method to the conventional anthraquinone process. To realize high-efficiency H₂ O₂ electrosynthesis, robust and low cost electrocatalysts have been intensively pursued, among which Co-based catalysts attract particular research interests due to the earth-abundance and high selectivity. Here, we provide a comprehensive review on the advancement of Co-based electrocatalyst for H₂ O₂ electroproduction. The fundamental chemistry of 2-electron ORR is discussed firstly for guiding the rational design of electrocatalysts. Subsequently, the development of Co-based electrocatalysts involving nanoparticles, compounds and single atom catalysts is summarized with the focus on active site identification, structure regulation and mechanism understanding. Moreover, the current challenges and future directions of the Co-based electrocatalysts are briefly summarized in this review.

Metal-organic framework derived vanadium oxide supported nanoporous carbon structure as a bifunctional electrocatalyst for potential application in metal air batteries

High-efficiency, sustainable, non-precious metal-based electrocatalysts with bifunctional catalytic activity for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are essential for metal-air batteries. In this research, a bifunctional electrocatalyst is developed by synthesizing a novel nanoporous vanadium oxide/carbon composite (NVC-900) through pyrolysis of a highly efficient vanadium metal-organic framework, MIL-101 (V). The fabrication process was conveniently carried out by pyrolyzing the synthesized MIL-101 (V) at 900 °C, producing vanadium oxide nanoparticles embedded in the extensively distributed pores of the carbon network. The evenly distributed nanopores substantially improve the performance of the efficient electrocatalyst for both the oxygen reduction reaction and oxygen evolution reactions (ORR/OER) by increasing surface area and facilitating access to stable catalytic active sites. The unique structure was characterized by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). For oxygen reduction reaction (ORR), the electrocatalyst established a promising limiting current density (J _L) of 5.2 mA cm^-2 at 1600 rpm at an onset potential of 1.18 V and a half-wave potential of 0.82 V, and for OER, a current density of 10 mA cm^-2 was delivered at a potential of 1.48 V. In comparison to 10% Pt/C, the synthesized bifunctional electrocatalyst being almost equally active towards bifunctional activity, showed much better long-term cyclic stability. The one-step thermal pyrolysis strategy to synthesize the nanoporous functional material and the proposed electrocatalytic material's long-term bifunctional activity and durability make it an ideal fit for next-generation portable green metal-air batteries.

Metalloporphyrins as Catalytic Models for Studying Hydrogen and Oxygen Evolution and Oxygen Reduction Reactions

The hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are involved in biological and artificial energy conversions. H-H and O-O bond formation/cleavage are essential steps in these reactions. In nature, intermediates involved in the H-H and O-O bond formation/cleavage are highly reactive and short-lived, making their identification and investigation difficult. In artificial catalysis, the realization of these reactions at considerable rates and close to their thermodynamic reaction equilibria remains a challenge. Therefore, the elucidation of the reaction mechanisms and structure-function relationships is of fundamental significance to understand these reactions and to develop catalysts.This Account describes our recent investigations on catalytic HER, OER, and ORR with metalloporphyrins and derivatives. Metalloporphyrins are used in nature for light harvesting, energy conversion, electron transfer, O₂ activation, and peroxide degradation. Synthetic metal porphyrin complexes are shown to be active for these reactions. We focused on exploring metalloporphyrins to study reaction mechanisms and structure-function relationships because they have stable and tunable structures and characteristic spectroscopic properties.For HER, we identified three H-H bond formation mechanisms and established the correlation between these processes and metal hydride electronic structures. Importantly, we provided direct experimental evidence for the bimetallic homolytic H-H bond formation mechanism by using sterically bulky porphyrins. Homolytic HER has been long proposed but rarely verified because the coupling of active hydride intermediates occurs spontaneously and quickly, making their detection challenging. By blocking the bimolecular mechanism through steric effects, we stabilized and characterized the Ni^III-H intermediate and verified homolytic HER by comparing the reaction behaviors of Ni porphyrins with and without steric effects. We therefore provided an unprecedented example to control homolytic versus heterolytic HER mechanisms through tuning steric effects of molecular catalysts.For the OER, the water nucleophilic attack (WNA) on high-valent terminal Mn-oxo has been proposed for the O-O bond formation in natural and artificial water oxidation. By using Mn tris(pentafluorophenyl)corrole, we identified Mn^V(O) and Mn^IV-peroxo intermediates in chemical and electrochemical OER and provided direct experimental evidence for the Mn-based WNA mechanism. Moreover, we demonstrated several catalyst design strategies to enhance the WNA rate, including the pioneering use of protective axial ligands. By studying Cu porphyrins, we proposed a bimolecular coupling mechanism between two metal-hydroxide radicals to form O-O bonds. Note that late-transition metals do not likely form terminal metal-oxo/oxyl.For the ORR, we presented several strategies to improve activity and selectivity, including providing rapid electron transfer, using electron-donating axial ligands, introducing hydrogen-bonding interactions, constructing dinuclear cooperation, and employing porphyrin-support domino catalysis. Importantly, we used Co porphyrin atropisomers to realize both two-electron and four-electron ORR, representing an unparalleled example to control ORR selectivity by tuning only steric effects without modifying molecular and/or electronic structures.Lastly, we developed several strategies to graft metalloporphyrins on various electrode materials through different covalent bonds. The molecular-engineered materials exhibit boosted electrocatalytic performance, highlighting promising applications of molecular electrocatalysis. Taken together, this Account demonstrates the benefits of exploring metalloporphyrins for the HER, OER, and ORR. The knowledge learned herein is valuable for the development of porphyrin-based catalysts and also other molecular and material catalysts for small molecule activation reactions.

Selective oxygenation of C-H and CC bonds with H2O2 by high-spin cobalt(II)-carboxylate complexes

Four cobalt(II)-carboxylate complexes [(6-Me₃-TPA)Co^II(benzoate)](BPh₄) (1), [(6-Me₃-TPA)Co^II(benzilate)](ClO₄) (2), [(6-Me₃-TPA)Co^II(mandelate)](BPh₄) (3), and [(6-Me₃-TPA)Co^II(MPA)](BPh₄) (4) (HMPA = 2-methoxy-2-phenylacetic acid) of the 6-Me₃-TPA (tris((6-methylpyridin-2-yl)methyl)amine) ligand were isolated to investigate their ability in H₂O₂-dependent selective oxygenation of C-H and CC bonds. All six-coordinate complexes contain a high-spin cobalt(II) center. While the cobalt(II) complexes are inert toward dioxygen, each of these complexes reacts readily with hydrogen peroxide to form a diamagnetic cobalt(III) species, which decays with time leading to the oxidation of the methyl groups on the pyridine rings of the supporting ligand. Intramolecular ligand oxidation by the cobalt-based oxidant is partially inhibited in the presence of external substrates, and the substrates are converted to their corresponding oxidized products. Kinetic studies and labelling experiments indicate the involvement of a metal-based oxidant in affecting the chemo- and stereo-selective catalytic oxygenation of aliphatic C-H bonds and epoxidation of alkenes. An electrophilic cobalt-oxygen species that exhibits a kinetic isotope effect (KIE) value of 5.3 in toluene oxidation by 1 is proposed as the active oxidant. Among the complexes, the cobalt(II)-benzoate (1) and cobalt(II)-MPA (4) complexes display better catalytic activity compared to their α-hydroxy analogues (2 and 3). Catalytic studies with the cobalt(II)-acetonitrile complex [(6-Me₃-TPA)Co^II(CH₃CN)₂](ClO₄)₂ (5) in the presence and absence of externally added benzoate support the role of the carboxylate co-ligand in oxidation reactions. The proposed catalytic reaction involves a carboxylate-bridged dicobalt complex in the activation of H₂O₂ followed by the oxidation of substrates by a metal-based oxidant.

A selective copper based oxygen reduction catalyst for the electrochemical synthesis of H2O2 at neutral pH

H₂O₂ is a bulk chemical used as “green” alternative in a variety of applications, but has an energy and waste intensive production method. The electrochemical O₂ reduction to H₂O₂ is viable alternative with examples of the direct production of up to 20% H₂O₂ solutions. In that respect, we found that the dinuclear complex Cu₂(btmpa) (6,6’‐bis[[bis(2‐pyridylmethyl)amino]methyl]‐2,2’‐bipyridine) reduces O₂ to H₂O₂ with a selectivity up to 90 % according to single linear sweep rotating ring disk electrode measurements. Microbalance experiments showed that complex reduction leads to surface adsorption thereby increasing the catalytic current. More importantly, we kept a high Faradaic efficiency for H₂O₂ between 60 and 70 % over the course of 2 h of amperometry by introducing high potential intervals to strip deposited copper (^depCu). This is the first example of extensive studies into the long term electrochemical O₂ to H₂O₂ reduction by a molecular complex which allowed to retain the high intrinsic selectivity of Cu₂(btmpa) towards H₂O₂ production leading to relevant levels of H₂O₂.

Influence of the spatial distribution of copper sites on the selectivity of the oxygen reduction reaction

Moving towards a hydrogen economy raises the demand for affordable and efficient catalysts for the oxygen reduction reaction. Cu-bmpa (bmpa = bis(2-picolyl)amine) is shown to have moderate activity, but poor selectivity for the 4-electron reduction of oxygen to water. To enhance the selectivity towards water formation, the cooperative effect of three Cu-bmpa binding sites in a single trinuclear complex is investigated. The catalytic currents in the presence of the trinuclear sites are lower, possibly due to the more rigid structure and therefore higher reorganization energies and/or slower diffusion rates of the catalytic species. Although the oxygen reduction activity of the trinuclear complexes is lower than that of mononuclear Cu-bmpa, the selectivity of the copper mediated oxygen reduction was significantly enhanced towards the 4-electron process due to a cooperative effect between three copper centers that have been positioned in close proximity. These results indicate that the cooperativity between metal ions within biomimetic sites can greatly enhance the ORR selectivity.

Catalytic Reduction of Dioxygen to Water by a Bioinspired Non-Heme Iron Complex via a 2+2 Mechanism

We report a bioinspired non-heme Fe complex with a tripodal [N₃O]^- ligand framework (Fe(PMG)(Cl)₂) that is electrocatalytically active toward dioxygen reduction with acetic acid as a proton source in acetonitrile solution. Under electrochemical and chemical conditions, Fe(PMG)(Cl)₂ selectively produces water via a 2+2 mechanism, where H₂O₂ is generated as a discrete intermediate species before further reduction to two equivalents of H₂O. Mechanistic studies support a catalytic cycle for dioxygen reduction where an off-cycle peroxo dimer species is the resting state of the catalyst. Spectroscopic analysis of the reduced complex Fe^II(PMG)Cl shows the stoichiometric formation of an Fe(III)-hydroxide species following exposure to H₂O₂; no catalytic activity for H₂O₂ disproportionation is observed, although the complex is electrochemically active for H₂O₂ reduction to H₂O. Electrochemical studies, spectrochemical experiments, and DFT calculations suggest that the carboxylate moiety of the ligand is sensitive to hydrogen-bonding interactions with the acetic acid proton donor upon reduction from Fe(III)/(II), favoring chloride loss trans to the tris-alkyl amine moiety of the ligand framework. These results offer insight into how mononuclear non-heme Fe active sites in metalloproteins distribute added charge and poise proton donors during reactions with dioxygen.

Substituent Effects in Carbon-Nanotube-Supported Copper Phenolato Complexes for Oxygen Reduction Reaction

Unprotected mononuclear pyrene-modified (bispyridylaminomethyl)methylphenol copper complexes were designed to be immobilized at multiwalled carbon nanotube (MWCNT) electrodes and form dinuclear bis(μ-phenolato) complexes on the surface. These complexes exhibit a high oxygen reduction reaction activity of 12.7 mA cm^-2 and an onset potential of 0.78 V versus reversible hydrogen electrode. The higher activity of these complexes compared to that of mononuclear complexes with bulkier groups is induced by the favorable early formation of a dinuclear catalytic species on MWCNT.

Enzyme-Inspired Iron Porphyrins for Improved Electrocatalytic Oxygen Reduction and Evolution Reactions

Nature uses Fe porphyrin sites for the oxygen reduction reaction (ORR). Synthetic Fe porphyrins have been extensively studied as ORR catalysts, but activity improvement is required. On the other hand, Fe porphyrins have been rarely shown to be efficient for the oxygen evolution reaction (OER). We herein report an enzyme-inspired Fe porphyrin 1 as an efficient catalyst for both ORR and OER. Complex 1, which bears a tethered imidazole for Fe binding, beats imidazole-free analogue 2, with an anodic shift of ORR half-wave potential by 160 mV and a decrease of OER overpotential by 150 mV to get the benchmark current density at 10 mA cm^-2 . Theoretical studies suggested that hydroxide attack to a formal Fe^V =O form the O-O bond. The axial imidazole can prevent the formation of trans HO-Fe^V =O, which is less effective to form O-O bond with hydroxide. As a practical demonstration, we assembled rechargeable Zn-air battery with 1, which shows equal performance to that with Pt/Ir-based materials.

Acid-promoted hydride transfer from an NADH analogue to a Cr(iii)-superoxo complex via a proton-coupled hydrogen atom transfer

The sequential transfer of an electron, a proton and an electron in a hydride transfer from dihydronicotinamide adenine dinucleotide (NADH) and its analogues has never been separated well. In addition, the effect of acids on hydride transfer from an NADH analogue to a metal-superoxo species has yet to be reported. We report herein the first example of an acid-promoted hydride transfer from an NADH analogue, 10-methyl-9,10-dihydroacridine (AcrH₂), to a Cr(iii)-superoxo complex, [(TMC)Cr^III(O₂)]²⁺, in the presence of HOTf in MeCN at 233 K. The acid-promoted hydride transfer from AcrH₂ to [(TMC)Cr^III(O₂)]²⁺ occurs via a proton-coupled hydrogen atom transfer from AcrH₂ to [(TMC)Cr^III(O₂)]²⁺ to produce a radical cation (AcrH₂˙⁺) with an inverse deuterium isotope effect (KIE) of 0.93(5). AcrH₂˙⁺ decayed via a proton transfer from AcrH₂˙⁺ to AcrH₂ with a KIE of 2.0(1), followed by the reaction of 10-methylacridinyl radical (AcrH˙) with [(TMC)Cr^III(H₂O₂)]³⁺ to produce a 10-methylacridinium ion (AcrH⁺) and [(TMC)Cr^III]³⁺. This work provides valuable insights into the mechanism of hydride transfer of NADH analogues by metal-superoxo intermediates, such as the switchover of the reaction mechanism from a one-step to a separated multi-step pathway in the presence of an acid.

Catalytic Four-Electron Reduction of Dioxygen by Ferrocene Derivatives with a Nonheme Iron(III) TAML Complex

A mononuclear nonheme iron(III) complex with a tetraamido macrocyclic ligand (TAML), [(TAML)Fe^III]^- (1), is a selective precatalyst for four-electron reduction of dioxygen by ferrocene derivatives in the presence of acetic acid (CH₃COOH) in acetone. This is the first work to show that a nonheme iron(III) complex catalyzes the four-electron reduction of O₂ by one-electron reductants. An iron(V)-oxo complex, [(TAML)Fe^V(O)]^- (2), was produced by oxygenation of 1 with O₂ via the formation of triacetone triperoxide (TATP), acting as an autocatalyst that shortened the induction time for the generation of 2. Decamethylferrocene (Me₁₀Fc) and octamethylferrocene (Me₈Fc) reduced 2 to 1 by two electrons in the presence of CH₃COOH to produce decamethylferrocenium cation (Me₁₀Fc⁺) and octamethylferrocenium cation (Me₈Fc⁺), respectively. Then, 1 was oxygenated by O₂ to regenerate 2 via the formation of TATP. In the cases of ferrocene (Fc), bromoferrocene (BrFc) and 1,1'-dibromoferrocene (Br₂Fc), initial electron transfer from ferrocene derivatives to 2 occurred; however, neither a second proton-coupled electron transfer from ferrocene derivatives to 2 nor a catalytic four-electron reduction of O₂ occurred.

Influence of Ligand Denticity and Flexibility on the Molecular Copper Mediated Oxygen Reduction Reaction

To date, the copper complex with the tris(2-pyridylmethyl)amine (tmpa) ligand (Cu-tmpa) catalyzes the ORR with the highest reported turnover frequency (TOF) for any molecular copper catalyst. To gain insight into the importance of the tetradentate nature and high flexibility of the tmpa ligand for efficient four-electron ORR catalysis, the redox and electrocatalytic ORR behavior of the copper complexes of 2,2′:6′,2″-terpyridine (terpy) and bis(2-pyridylmethyl)amine (bmpa) (Cu-terpy and Cu-bmpa, respectively) were investigated in the present study. With a combination of cyclic voltammetry and rotating ring disk electrode measurements, we demonstrate that the presence of the terpy and bmpa ligands results in a decrease in catalytic ORR activity and an increase in Faradaic efficiency for H₂O₂ production. The lower catalytic activity is shown to be the result of a stabilization of the Cu^I state of the complex compared to the earlier reported Cu-tmpa catalyst. This stabilization is most likely caused by the lower electron donating character of the tridentate terpy and bmpa ligands compared to the tetradentate tmpa ligand. The Laviron plots of the redox behavior of Cu-terpy and Cu-bmpa indicated that the formation of the ORR active catalyst involves relatively slow electron transfer kinetics which is caused by the inability of Cu-terpy and Cu-bmpa to form the preferred tetrahedral coordination geometry for a Cu^I complex easily. Our study illustrates that both the tetradentate nature of the tmpa ligand and the ability of Cu-tmpa to form the preferred tetrahedral coordination geometry for a Cu^I complex are of utmost importance for ORR catalysis with very high catalytic rates.

Redox and electrocatalytic ORR behavior of the mononuclear copper complexes of 2,2′:6′,2″-terpyridine (terpy) and bis(2-pyridylmethyl)amine (bmpa) in neutral aqueous buffer solution: High Faradaic efficiencies for H₂O₂ production were revealed along the ORR active potential window using the rotating ring disk electrode (RRDE), and the foot-of-the-wave analysis (FOWA) was applied to describe the catalytic activity quantitatively. Additionally, the stability of the catalysts under operating conditions receives considerable attention.

A Mechanistic Dichotomy in Two-Electron Reduction of Dioxygen Catalyzed by N,N'-Dimethylated Porphyrin Isomers

Selective two-electron reduction of dioxygen (O₂ ) to hydrogen peroxide (H₂ O₂ ) has been achieved by two saddle-distorted N,N'-dimethylated porphyrin isomers, an N21,N'22-dimethylated porphyrin (anti-Me₂ P) and an N21,N'23-dimethylated porphyrin (syn-Me₂ P) as catalysts and ferrocene derivatives as electron donors in the presence of protic acids in acetonitrile. The higher catalytic performance in an oxygen reduction reaction (ORR) was achieved by anti-Me₂ P with higher turnover number (TON=250 for 30 min) than that by syn-Me₂ P (TON=218 for 60 min). The reactive intermediates in the catalytic ORR were confirmed to be the corresponding isophlorins (anti-Me₂ Iph or syn-Me₂ Iph) by spectroscopic measurements. The rate-determining step in the catalytic ORRs was concluded to be proton-coupled electron-transfer reduction of O₂ with isophlorins based on kinetic analysis. The ORR rate by anti-Me₂ Iph was accelerated by external protons, judging from the dependence of the observed initial rates on acid concentrations. In contrast, no acceleration of the ORR rate with syn-Me₂ Iph by external protons was observed. The different mechanisms in the O₂ reduction by the two isomers should be derived from that of the arrangement of hydrogen bonding of a O₂ with inner NH protons of the isophlorins.

p-Substituted Tris(2-pyridylmethyl)amines as Ligands for Highly Active ATRP Catalysts: Facile Synthesis and Characterization

A facile and efficient two-step synthesis of p-substituted tris(2-pyridylmethyl)amine (TPMA) ligands to form Cu complexes with the highest activity to date in atom transfer radical polymerization (ATRP) is presented. In the divergent synthesis, p-Cl substituents in tris(4-chloro-2-pyridylmethyl)amine (TPMA^3Cl ) were replaced in one step and high yield by electron-donating cyclic amines (pyrrolidine (TPMA^PYR ), piperidine (TPMA^PIP ), and morpholine (TPMA^MOR )) by nucleophilic aromatic substitution. The [Cu^II (TPMA^NR2 )Br]⁺ complexes exhibited larger energy gaps between frontier molecular orbitals and >0.2 V more negative reduction potentials than [Cu^II (TPMA)Br]⁺ , indicating >3 orders of magnitude higher ATRP activity. [Cu^I (TPMA^PYR )]⁺ exhibited the highest reported activity for Br-capped acrylate chain ends in DMF, and moderate activity toward C-F bonds at room temperature. ATRP of n-butyl acrylate using only 10-25 part per million loadings of [Cu^II (TPMA^NR2 )Br]⁺ exhibited excellent control.

Oxygen Reduction Reaction at Penta-Coordinated Co Phthalocyanines

From the early 60s, Co complexes, especially Co phthalocyanines (CoPc) have been extensively studied as electrocatalysts for the oxygen reduction reaction (ORR). Generally, they promote the 2-electron reduction of O2 to give peroxide whereas the 4-electron reduction is preferred for fuel cell applications. Still, Co complexes are of interest because depending on the chemical environment of the Co metal centers either promote the 2-electron transfer process or the 4-electron transfer. In this study, we synthetized 3 different Co catalysts where Co is coordinated to 5 N atoms using CoN4 phthalocyanines with a pyridine axial linker anchored to carbon nanotubes. We tested complexes with electro-withdrawing or electro-donating residues on the N4 phthalocyanine ligand. The catalysts were characterized by EPR and XPS spectroscopy. Ab initio calculations, Koutecky-Levich extrapolation and Tafel plots confirm that the pyridine back ligand increases the Co-O2 binding energy, and therefore promotes the 4-electron reduction of O2. But the presence of electron withdrawing residues, in the plane of the tetra N atoms coordinating the Co, does not further increase the activity of the compounds because of pull-push electronic effects.

Polyaromatic hydrocarbon derivatized azo-oximes of cobalt(iii) for the ligand-redox controlled electrocatalytic oxygen reduction reaction

Two new polyaromatic hydrocarbon (PAH) derivatized cobalt(iii) azo-oxime complexes were synthesized and their activity in electrocatalytic oxygen reduction reaction (ORR) were explored.

Mechanistic dichotomies in redox reactions of mononuclear metal–oxygen intermediates

This review article focuses on various mechanistic dichotomies in redox reactions of metal–oxygen intermediates with the emphasis on understanding and controlling their redox reactivity from experimental and theoretical points of view.

Cu(I) Coordination Complex Precursor for Randomized CuOx Microarray Loaded on Carbon Nanofiber with Excellent Electrocatalytic Performance for Electrochemical Glucose Detection

A homoleptic ionic Cu(I) coordination complex that was based on 2,2′-biquinoline ligand functionalized with long alkyl chains (Cu(I)–C18) was used as a precursor to modify a carbon nanofiber paste electrode (Cu–C18/CNF). Randomized copper oxide microelectrode arrays dispersed within carbon nanofiber paste (CuO_x/CNF) were obtained by electrochemical treatment of Cu–C18/CNF while using cyclic voltammetry (CV). The CuO_x/CNF exhibited high electrocatalytic activity towards glucose oxidation at +0.6 V and +1.2 V vs. Ag/AgCl. Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM) characterized the electrodes composition. Cyclic voltammetry (CV), square wave-voltammetry (SWV), and multiple-pulsed amperometry (MPA) techniques provided optimized conditions for glucose oxidation and detection. A preconcentration step that involved 10 minutes accumulation at open circuit potential before SWV running led to the lowest limit of detection and the highest sensitivity for glucose detection (5419.77 µA·mM⁻¹·cm⁻² at + 1.1 V vs. Ag/AgCl) vs. Cu-based electrodes reported to date in literature.

Proton-assisted air oxidation mechanisms of iron(ii) bis-thiosemicarbazone complexes at physiological pH: a kinetico-mechanistic study

The kinetics of oxidation of different biologically-active Fe^II bis-thiosemicarbazone complexes in water has been monitored at varying dioxygen concentration, temperature, pressure, and pH. The oxidation reactions observed can be resolved as a single-step process, producing the expected ferric complex, with rates increasing with decreasing pH. From the pH-dependence of the observed rate constants, a rate law with two terms can be derived, one of them being independent of the acid concentration and the other term showing a saturation behaviour with respect to [H⁺]. These results indicate the existence of two parallel pathways for oxidation: the acid-independent pathway is only operative for the complexes with ligands bearing terminal, non-coordinated, unsubstituted amines, whereas the term with a [H⁺]-limiting kinetic behaviour is observed for all the complexes and indicates that the reacting species has to be protonated prior to the oxidation step. From the data collected, the rate law and the thermal and pressure activation parameters have been used to interpret the operating reaction mechanisms. Given the fact that the empirical trends rule out an outer-sphere oxidation process, DFT calculations have been carried out to explain the results and suggest the likely formation, under steady-state very low concentration conditions, of Fe^III superoxo and hydroperoxo intermediates.

Significantly improved electrocatalytic oxygen reduction by an asymmetrical Pacman dinuclear cobalt(ii) porphyrin-porphyrin dyad

Asymmetrical Pacman dinuclear Co bisporphyrin shows significantly improved activity and selectivity for catalytic reduction of O₂ to water in comparison with corresponding mononuclear Co porphyrins and symmetrical dinuclear Co bisporphyrins.

Pacman dinuclear Co^II triphenylporphyrin-tri(pentafluorophenyl)porphyrin 1 and dinuclear Co^II bis-tri(pentafluorophenyl)porphyrin 2, anchored at the two meso-positions of a benzene linker, are synthesized and examined as electrocatalysts for the oxygen reduction reaction (ORR). Both dinuclear Co bisporphyrins are more efficient and selective than corresponding mononuclear Co^II tetra(pentafluorophenyl)porphyrin 3 and Co^II tetraphenylporphyrin 4 for the four-electron electrocatalytic reduction of O₂ to water. Significantly, although the ORR selectivities of the two dinuclear Co bisporphyrins are similar to each other, 1 outperforms 2, in terms of larger catalytic ORR currents and lower overpotentials. Electrochemical studies showed different redox behaviors of the two Co sites of 1: the Co^III/Co^II reduction of the Co-TPP (TPP = triphenylporphyrin) site is well-behind that of the Co-TPFP (TPFP = tri(pentafluorophenyl)porphyrin) site by 440 mV. This difference indicated their different roles in the ORR: Co^II-TPFP is likely the O₂ binding and reduction site, while Co^III-TPP, which is generated by the oxidation of Co^II-TPP on electrodes, may function as a Lewis acid to assist the O₂ binding and activation. The positively charged Co^III-TPP will have through-space charge interactions with the negatively charged O₂-adduct unit, which will reduce the activation energy barrier for the ORR. This effect of Co-TPP closely resembles that of the Cu_B site of metalloenzyme cytochrome c oxidase (CcO), which catalyzes the biological reduction of O₂. This work represents a rare example of asymmetrical dinuclear metal catalysts, which can catalyze the 4e reduction of O₂ with high selectivity and significantly improved activity.

Mechanistic Study of Oxygen Reduction at Liquid/Liquid Interfaces by Hybrid Ultramicroelectrodes and Mass Spectrometry

Proton-coupled electron transfer (PCET) reactions at various interfaces (liquid/membrane, solid/electrolyte, liquid/liquid) lie at the heart of many processes in biology and chemistry. Mechanistic study can provide profound understanding of PCET and rational design of new systems. However, most mechanisms of PCET reactions at a liquid/liquid interface have been proposed based on electrochemical and spectroscopic data, which lack direct evidence for possible intermediates. Moreover, a liquid/liquid interface as one type of soft interface is dynamic, making the investigation of interfacial reactions very challenging. Herein a novel electrochemistry method coupled to mass spectrometry (EC-MS) was introduced for in situ study of the oxygen reduction reaction (ORR) by ferrocene (Fc) under catalysis from cobalt tetraphenylporphine (CoTPP) at liquid/liquid interfaces. The key units are two types of gel hybrid ultramicroelectrodes (agar-gel/organic hybrid ultramicroelectrodes and water/PVC-gel hybrid ultramicroelectrodes), which were made based on dual micro- or nanopipettes. A solidified liquid/liquid interface can be formed at the tip of these pipettes, and it serves as both an electrochemical cell and a nanospray emitter for mass spectrometry. We demonstrated that the solidified L/L interfaces were very similar to typical L/L interfaces. Key CoTPP intermediates of the ORR at the liquid/liquid interfaces were identified for the first time, and the four-electron oxygen reduction pathway predominated, which provides valuable insights into the mechanism of the ORR. Theoretical simulation has further supported the possibility of formation of intermediates. This type of platform is promising for in situ tracking and identifying intermediates to study complicated reactions at liquid/liquid interfaces or other soft interfaces.

Ligand Identity-Induced Generation of Enhanced Oxidative Hydrogen Atom Transfer Reactivity for a CuII2(O2•-) Complex Driven by Formation of a CuII2(-OOH) Compound with a Strong O-H Bond

A superoxide-bridged dicopper(II) complex, [Cu^II₂(XYLO)(O₂^•-)]²⁺ (1) (XYLO = binucleating m-xylyl derivative with a bridging phenolate ligand donor and two bis(2-{2-pyridyl}ethyl)amine arms), was generated from chemical oxidation of the peroxide-bridged dicopper(II) complex [Cu^II₂(XYLO)(O₂^2-)]⁺ (2), using ferrocenium (Fc⁺) derivatives, in 2-methyltetrahydrofuran (MeTHF) at -125 °C. Using Me₁₀Fc⁺, a 1 ⇆ 2 equilibrium was established, allowing for calculation of the reduction potential of 1 as -0.525 ± 0.01 V vs Fc^+/0. Addition of 1 equiv of strong acid to 2 afforded the hydroperoxide-bridged dicopper(II) species [Cu^II₂(XYLO)(OOH)]²⁺ (3). An acid-base equilibrium between 3 and 2 was achieved through spectral titrations using a derivatized phosphazene base. The pK_a of 3 was thus determined to be 24 ± 0.6 in MeTHF at -125 °C. Using a thermodynamic square scheme and the Bordwell relationship, the hydroperoxo complex (3) O-H bond dissociation free energy (BDFE) was calculated as 81.8 ± 1.5 (BDE = 86.8) kcal/mol. The observed oxidizing capability of [Cu^II₂(XYLO)(O₂^•-)]²⁺ (1), as demonstrated in H atom abstraction reactions with certain phenolic ArO-H and hydrocarbon C-H substrates, provides direct support for this experimentally determined O-H BDFE. A kinetic study reveals a very fast reaction of TEMPO-H with 1 in MeTHF, with k (-100 °C) = 5.6 M^-1 s^-1. Density functional theory (DFT) calculations reveal how the structure of 1 may minimize stabilization of the superoxide moiety, resulting in its enhanced reactivity. The thermodynamic insights obtained herein highlight the importance of the interplay between ligand design and the generation and properties of copper (or other metal ion) bound O₂-derived reduced species, such as pK_a, reduction potential, and BDFE; these may be relevant to the capabilities (i.e., oxidizing power) of reactive oxygen intermediates in metalloenzyme chemical system mediated oxidative processes.

Fast Oxygen Reduction Catalyzed by a Copper(II) Tris(2-pyridylmethyl)amine Complex through a Stepwise Mechanism

Catalytic pathways for the reduction of dioxygen can either lead to the formation of water or peroxide as the reaction product. We demonstrate that the electrocatalytic reduction of O₂ by the pyridylalkylamine copper complex [Cu(tmpa)(L)]²⁺ in a neutral aqueous solution follows a stepwise 4 e^- /4 H⁺ pathway, in which H₂ O₂ is formed as a detectable intermediate and subsequently reduced to H₂ O in two separate catalytic reactions. These homogeneous catalytic reactions are shown to be first order in catalyst. Coordination of O₂ to Cu^I was found to be the rate-determining step in the formation of the peroxide intermediate. Furthermore, electrochemical studies of the reaction kinetics revealed a high turnover frequency of 1.5×10⁵  s^-1 , the highest reported for any molecular copper catalyst.

Brønsted Acid Scaling Relationships Enable Control Over Product Selectivity from O2 Reduction with a Mononuclear Cobalt Porphyrin Catalyst

The selective reduction of O₂, typically with the goal of forming H₂O, represents a long-standing challenge in the field of catalysis. Macrocyclic transition-metal complexes, and cobalt porphyrins in particular, have been the focus of extensive study as catalysts for this reaction. Here, we show that the mononuclear Co-tetraarylporphyrin complex, Co(por^OMe) (por^OMe = meso-tetra(4-methoxyphenyl)porphyrin), catalyzes either 2e^-/2H⁺ or 4e^-/4H⁺ reduction of O₂ with high selectivity simply by changing the identity of the Brønsted acid in dimethylformamide (DMF). The thermodynamic potentials for O₂ reduction to H₂O₂ or H₂O in DMF are determined and exhibit a Nernstian dependence on the acid pK _a, while the Co^III/II redox potential is independent of the acid pK _a. The reaction product, H₂O or H₂O₂, is defined by the relationship between the thermodynamic potential for O₂ reduction to H₂O₂ and the Co^III/II redox potential: selective H₂O₂ formation is observed when the Co^III/II potential is below the O₂/H₂O₂ potential, while H₂O formation is observed when the Co^III/II potential is above the O₂/H₂O₂ potential. Mechanistic studies reveal that the reactions generating H₂O₂ and H₂O exhibit different rate laws and catalyst resting states, and these differences are manifested as different slopes in linear free energy correlations between the log(rate) versus pK _a and log(rate) versus effective overpotential for the reactions. This work shows how scaling relationships may be used to control product selectivity, and it provides a mechanistic basis for the pursuit of molecular catalysts that achieve low overpotential reduction of O₂ to H₂O.

Chromium-Salen Catalyzed Cross-Coupling of Phenols: Mechanism and Origin of the Selectivity

A highly chemoselective phenol cross-coupling reaction catalyzed by a Cr-salen catalyst was developed. Kinetic studies showed that the oxidation of Cr(III) to Cr(V) is the rate-determining step of the reaction. In addition, experimental stoichiometric analysis showed that a high valent Cr(V) species is the active catalyst for this process. The selectivity of the reaction was found to be determined by the cross-coupling carbon-carbon bond forming reaction, rather than any precoordination species. It appears that the lowest energy cross-coupling pathway requires a lesser degree of electronic reorganization in its transition state vs the lowest energy homocoupling pathway. This result was supported by stoichiometric Cr(V) kinetics, ¹³C kinetic isotope effects, and density functional theory (DFT) calculations. The understanding of the full landscape of this reaction allowed us to develop a general analysis to predict the regioselectivity of the cross-coupling reaction.

Dioxygen/Hydrogen Peroxide Interconversion Using Redox Couples of Saddle-Distorted Porphyrins and Isophlorins

Interconversion between dioxygen (O₂) and hydrogen peroxide (H₂O₂) has attracted much interest because of the growing importance of H₂O₂ as an energy source. There are many reports on O₂ conversions to H₂O₂; however, no example has been reported on O₂/H₂O₂ interconversion. Herein, we describe successful achievement of a reversible O₂/H₂O₂ conversion based on an N21, N23-dimethylated saddle-distorted porphyrin and the corresponding two-electron-reduced porphyrin (isophlorin) for the first time. The isophlorin could react with O₂ to afford the corresponding porphyrin and H₂O₂; conversely, the porphyrin also reacted with excess H₂O₂ to reproduce the corresponding isophlorin and O₂. The isophlorin-O₂/porphyrin-H₂O₂ interconversion was repeatedly proceeded by alternate bubbling of Ar or O₂, although no reversible conversion was observed in the case of an N21, N22-dimethylated porphyrin as a structural isomer. Such a drastic change of the reversibility was derived from the directions of inner N H protons in hydrogen-bond formation of the isophlorin core with O₂ as well as those of the lone pairs of the inner nitrogen atoms of the porphyrin core to form hydrogen bonds with H₂O₂. The intriguing isophlorin-O₂/porphyrin-H₂O₂ interconversion was accomplished by introducing methyl groups at the inner nitrogen atoms to minimize the difference of the Gibbs free energy between isophlorin-O₂/porphyrin-H₂O₂ states and the Gibbs activation energy of the interconversion. On the basis of the kinetic and thermodynamic analysis on the isophlorin-O₂/porphyrin-H₂O₂ interconversion using ¹H NMR and UV-vis spectroscopies and DFT calculations, we propose the formation of a two-point hydrogen-bonding adduct between the N21, N23-dimethylated porphyrin and H₂O₂ as an intermediate.

Heme and Nonheme High-Valent Iron and Manganese Oxo Cores in Biological and Abiological Oxidation Reactions

Utilization of O₂ as an abundant and environmentally benign oxidant is of great interest in the design of bioinspired synthetic catalytic oxidation systems. Metalloenzymes activate O₂ by employing earth-abundant metals and exhibit diverse reactivities in oxidation reactions, including epoxidation of olefins, functionalization of alkane C-H bonds, arene hydroxylation, and syn-dihydroxylation of arenes. Metal-oxo species are proposed as reactive intermediates in these reactions. A number of biomimetic metal-oxo complexes have been synthesized in recent years by activating O₂ or using artificial oxidants at iron and manganese centers supported on heme or nonheme-type ligand environments. Detailed reactivity studies together with spectroscopy and theory have helped us understand how the reactivities of these metal-oxygen intermediates are controlled by the electronic and steric properties of the metal centers. These studies have provided important insights into biological reactions, which have contributed to the design of biologically inspired oxidation catalysts containing earth-abundant metals like iron and manganese. In this Outlook article, we survey a few examples of these advances with particular emphasis in each case on the interplay of catalyst design and our understanding of metalloenzyme structure and function.

Structure and reactivity of the first-row d-block metal-superoxo complexes

This review discusses the structure and reactivity of metal-superoxo complexes covering all ten first-row d-block metals from Sc to Zn.