Impact of Intramolecular Hydrogen Bonding on the Reactivity of Cupric Superoxide Complexes with O-H and C-H Substrates

The dioxygen reactivity of a series of TMPA-based copper(I) complexes (TMPA=tris(2-pyridylmethyl)amine), with and without secondary-coordination-sphere hydrogen-bonding moieties, was studied at -135 °C in 2-methyltetrahydrofuran (MeTHF). Kinetic stabilization of the H-bonded [( ( X 1 ) ( X 2 ) TMPA)Cu^II (O₂ ^.- )]⁺ cupric superoxide species was achieved, and they were characterized by resonance Raman (rR) spectroscopy. The structures and physical properties of [( ( X 1 ) ( X 2 ) TMPA)Cu^II (N₃ ^- )]⁺ azido analogues were compared, and the O₂ ^.- reactivity of ligand-Cu^I complexes when an H-bonding moiety is replaced by a methyl group was contrasted. A drastic enhancement in the reactivity of the cupric superoxide towards phenolic substrates as well as oxidation of substrates possessing moderate C-H bond-dissociation energies is observed, correlating with the number and strength of the H-bonding groups.

Enhanced Rates of C-H Bond Cleavage by a Hydrogen-Bonded Synthetic Heme High-Valent Iron(IV) Oxo Complex

Secondary coordination sphere interactions are critical in facilitating the formation, stabilization, and enhanced reactivity of high-valent oxidants required for essential biochemical processes. Herein, we compare the C-H bond oxidizing capabilities of spectroscopically characterized synthetic heme iron(IV) oxo complexes, F₈Cmpd-II (F₈ = tetrakis(2,6-difluorophenyl)porphyrinate), and a 2,6-lutidinium triflate (LutH⁺) Lewis acid adduct involving ferryl O-atom hydrogen-bonding, F₈Cmpd-II(LutH⁺). Second-order rate constants utilizing C-H and C-D substrates were obtained by UV-vis spectroscopic monitoring, while products were characterized and quantified by EPR spectroscopy and gas chromatography (GC). With xanthene, F₈Cmpd-II(LutH⁺) reacts 40 times faster (k₂ = 14.2 M^-1 s^-1; -90 °C) than does F₈Cmpd-II, giving bixanthene plus xanthone and the heme product [F₈Fe^IIIOH₂]⁺. For substrates with greater C-H bond dissociation energies (BDEs) F₈Cmpd-II(LutH⁺) reacts with the second order rate constants k₂(9,10-dihydroanthracene; DHA) = 0.485 M^-1 s^-1 and k₂(fluorene) = 0.102 M^-1 s^-1 (-90 °C); by contrast, F₈Cmpd-II is unreactive toward these substrates. For xanthene vs xanthene-(d₂), large, nonclassical deuterium kinetic isotope effects are roughly estimated for both F₈Cmpd-II and F₈Cmpd-II(LutH⁺). The deuterated H-bonded analog, F₈Cmpd-II(LutD⁺), was also prepared; for the reaction with DHA, an inverse KIE (compared to F₈Cmpd-II(LutH⁺)) was observed. This work originates/inaugurates experimental investigation of the reactivity of authentic H-bonded heme-based Fe^IV═O compounds, critically establishing the importance of oxo H-bonding (or protonation) in heme complexes and enzyme active sites.

Ligand Identity-Induced Generation of Enhanced Oxidative Hydrogen Atom Transfer Reactivity for a CuII2(O2•-) Complex Driven by Formation of a CuII2(-OOH) Compound with a Strong O-H Bond

A superoxide-bridged dicopper(II) complex, [Cu^II₂(XYLO)(O₂^•-)]²⁺ (1) (XYLO = binucleating m-xylyl derivative with a bridging phenolate ligand donor and two bis(2-{2-pyridyl}ethyl)amine arms), was generated from chemical oxidation of the peroxide-bridged dicopper(II) complex [Cu^II₂(XYLO)(O₂^2-)]⁺ (2), using ferrocenium (Fc⁺) derivatives, in 2-methyltetrahydrofuran (MeTHF) at -125 °C. Using Me₁₀Fc⁺, a 1 ⇆ 2 equilibrium was established, allowing for calculation of the reduction potential of 1 as -0.525 ± 0.01 V vs Fc^+/0. Addition of 1 equiv of strong acid to 2 afforded the hydroperoxide-bridged dicopper(II) species [Cu^II₂(XYLO)(OOH)]²⁺ (3). An acid-base equilibrium between 3 and 2 was achieved through spectral titrations using a derivatized phosphazene base. The pK_a of 3 was thus determined to be 24 ± 0.6 in MeTHF at -125 °C. Using a thermodynamic square scheme and the Bordwell relationship, the hydroperoxo complex (3) O-H bond dissociation free energy (BDFE) was calculated as 81.8 ± 1.5 (BDE = 86.8) kcal/mol. The observed oxidizing capability of [Cu^II₂(XYLO)(O₂^•-)]²⁺ (1), as demonstrated in H atom abstraction reactions with certain phenolic ArO-H and hydrocarbon C-H substrates, provides direct support for this experimentally determined O-H BDFE. A kinetic study reveals a very fast reaction of TEMPO-H with 1 in MeTHF, with k (-100 °C) = 5.6 M^-1 s^-1. Density functional theory (DFT) calculations reveal how the structure of 1 may minimize stabilization of the superoxide moiety, resulting in its enhanced reactivity. The thermodynamic insights obtained herein highlight the importance of the interplay between ligand design and the generation and properties of copper (or other metal ion) bound O₂-derived reduced species, such as pK_a, reduction potential, and BDFE; these may be relevant to the capabilities (i.e., oxidizing power) of reactive oxygen intermediates in metalloenzyme chemical system mediated oxidative processes.

Spin Interconversion of Heme-Peroxo-Copper Complexes Facilitated by Intramolecular Hydrogen-Bonding Interactions

Synthetic peroxo-bridged high-spin (HS) heme-(μ-η2:η1-O22-)-Cu(L) complexes incorporating (as part of the copper ligand) intramolecular hydrogen-bond (H-bond) capabilities and/or steric effects are herein demonstrated to affect the complex's electronic and geometric structure, notably impacting the spin state. An H-bonding interaction with the peroxo core favors a low-spin (LS) heme-(μ-η1:η1-O22-)-Cu(L) structure, resulting in a reversible temperature-dependent interconversion of spin state (5 coordinate HS to 6 coordinate LS). The LS state dominates at low temperatures, even in the absence of a strong trans-axial heme ligand. Lewis base addition inhibits the H-bond facilitated spin interconversion by competition for the H-bond donor, illustrating the precise H-bonding interaction required to induce spin-crossover (SCO). Resonance Raman spectroscopy (rR) shows that the H-bonding pendant interacts with the bridging peroxide ligand to stabilize the LS but not the HS state. The H-bond (to the Cu-bound O atom) acts to weaken the O-O bond and strengthen the Fe-O bond, exhibiting ν(M-O) and ν(O-O) values comparable to analogous known LS complexes with a strong donating trans-axial ligand, 1,5-dicyclohexylimidazole, (DCHIm)heme-(μ-η1:η1-O22-)-Cu(L). Variable-temperature (-90 to -130 °C) UV-vis and 2H NMR spectroscopies confirm the SCO process and implicate the involvement of solvent binding. Examining a case of solvent binding without SCO, thermodynamic parameters were obtained from a van't Hoff analysis, accounting for its contribution in SCO. Taken together, these data provide evidence for the H-bond group facilitating a core geometry change and allowing solvent to bind, stabilizing a LS state. The rR data, complemented by DFT analysis, reveal a stronger H-bonding interaction with the peroxo core in the LS compared to the HS complexes, which enthalpically favors the LS state. These insights enhance our fundamental understanding of secondary coordination sphere influences in metalloenzymes.

Influence of intramolecular secondary sphere hydrogen-bonding interactions on cytochrome c oxidase inspired low-spin heme-peroxo-copper complexes

Dioxygen reduction by heme-copper oxidases is a critical biochemical process, wherein hydrogen bonding is hypothesized to participate in the critical step involving the active-site reductive cleavage of the O-O bond. Sixteen novel synthetic heme-(μ-O2 2-)-Cu(XTMPA) complexes, whose design is inspired by the cytochrome c oxidase active site structure, were generated in an attempt to form the first intramolecular H-bonded complexes. Derivatives of the "parent" ligand (XTMPA, TMPA = (tris((2-pyridyl)methyl)amine)) possessing one or two amine pendants preferentially form an H-bond with the copper-bound O-atom of the peroxide bridge. This is evidenced by a characteristic blue shift in the ligand-to-metal charge transfer (LMCT) bands observed in UV-vis spectroscopy (consistent with lowering of the peroxo π* relative to the iron orbitals) and a weakening of the O-O bond determined by resonance Raman spectroscopy (rR), with support from Density Functional Theory (DFT) calculations. Remarkably, with the TMPA-based infrastructure (versus similar heme-peroxo-copper complexes with different copper ligands), the typically undetected Cu-O stretch for these complexes was observed via rR, affording critical insights into the nature of the O-O peroxo core for the complexes studied. While amido functionalities have been shown to have greater H-bonding capabilities than their amino counterparts, in these heme-peroxo-copper complexes amido substituents distort the local geometry such that H-bonding with the peroxo core only imparts a weak electronic effect; optimal H-bonding interactions are observed by employing two amino groups on the copper ligand. The amino-substituted systems presented in this work reveal a key orientational anisotropy in H-bonding to the peroxo core for activating the O-O bond, offering critical insights into effective O-O cleavage chemistry. These findings indirectly support computational and protein structural studies suggesting the presence of an interstitial H-bonding water molecule in the CcO active site, which is critical for the desired reactivity. The results are evaluated with appropriate controls and discussed with respect to potential O2-reduction capabilities.

Unprecedented direct cupric-superoxo conversion to a bis-μ-oxo dicopper(III) complex and resulting oxidative activity

Investigations of small molecule copper-dioxygen chemistry can and have provided fundamental insights into enzymatic processes (e.g., copper metalloenzyme dioxygen binding geometries and their associated spectroscopy and substrate reactivity). Strategically designing copper-binding ligands has allowed for insight into properties that favor specific (di)copper-dioxygen species. Herein, the tetradentate tripodal TMPA-based ligand (TMPA = tris((2-pyridyl)methyl)amine) possessing a methoxy moiety in the 6-pyridyl position on one arm (OCH3TMPA) was investigated. This system allows for a trigonal bipyramidal copper(II) geometry as shown by the UV-vis and EPR spectra of the cupric complex [(OCH3TMPA)CuII(OH2)](ClO4)2. Cyclic voltammetry experiments determined the reduction potential of this copper(II) species to be -0.35 V vs. Fc+/0 in acetonitrile, similar to other TMPA-derivatives bearing sterically bulky 6-pyridyl substituents. The copper-dioxygen reactivity is also analogous to these TMPA-derivatives, affording a bis-μ-oxo dicopper(III) complex, [{(OCH3TMPA)CuIII}2(O2-)2]2+, upon oxygenation of the copper(I) complex [(OCH3TMPA)CuI](B(C6F5)4) at cryogenic temperatures in 2-methyltetrahydrofuran. This highly reactive intermediate is capable of oxidizing phenolic substrates through a net hydrogen atom abstraction. However, after bubbling of the precursor copper(I) complex with dioxygen at very low temperatures (-135 °C), a cupric superoxide species, [(OCH3TMPA)CuII(O2 •-)]+, is initially formed before slowly converting to [{(OCH3TMPA)CuIII}2(O2-)2]2+. This appears to be the first instance of the direct conversion of a cupric superoxide to a bis-μ-oxo dicopper(III) species in copper(I)-dioxygen chemistry.

Synthetic Fe/Cu Complexes: Toward Understanding Heme-Copper Oxidase Structure and Function

Heme-copper oxidases (HCOs) are terminal enzymes on the mitochondrial or bacterial respiratory electron transport chain, which utilize a unique heterobinuclear active site to catalyze the 4H+/4e- reduction of dioxygen to water. This process involves a proton-coupled electron transfer (PCET) from a tyrosine (phenolic) residue and additional redox events coupled to transmembrane proton pumping and ATP synthesis. Given that HCOs are large, complex, membrane-bound enzymes, bioinspired synthetic model chemistry is a promising approach to better understand heme-Cu-mediated dioxygen reduction, including the details of proton and electron movements. This review encompasses important aspects of heme-O2 and copper-O2 (bio)chemistries as they relate to the design and interpretation of small molecule model systems and provides perspectives from fundamental coordination chemistry, which can be applied to the understanding of HCO activity. We focus on recent advancements from studies of heme-Cu models, evaluating experimental and computational results, which highlight important fundamental structure-function relationships. Finally, we provide an outlook for future potential contributions from synthetic inorganic chemistry and discuss their implications with relevance to biological O2-reduction.

Direct Determination of Electron-Transfer Properties of Dicopper-Bound Reduced Dioxygen Species by a Cryo-Spectroelectrochemical Approach

Direct experimental determination of redox properties of superoxo (O2.- ) and peroxo (O22- ) embedded in dicopper complexes bearing an unsymmetrical binucleating ligand was achieved using cryo-electrochemistry and cryo-spectroelectrochemistry in dichloromethane. Cyclic voltammetry for dicopper(I) (1+ ) oxidation to a CuI CuII mixed-valent species (12+ ) under inert atmosphere at 193 K reveals slow heterogeneous electron-transfer kinetics, indicative of a large reorganization energy. Oxygenation of the dicuprous complex 1+ gives the bridged peroxo dicopper(II) species 3+ , which is reversibly oxidized to the superoxo complex 22+ at E0 =0.11 V (vs. SCE) with a small inner sphere electron-transfer reorganization energy, λi =0.54 eV, determined from variable temperature electrochemical impedance spectroscopy. The data suggest that the O2.- /O22- redox process occurs directly on the O2 -derived core.

Activation of dioxygen by copper metalloproteins and insights from model complexes

Nature uses dioxygen as a key oxidant in the transformation of biomolecules. Among the enzymes that are utilized for these reactions are copper-containing metalloenzymes, which are responsible for important biological functions such as the regulation of neurotransmitters, dioxygen transport, and cellular respiration. Enzymatic and model system studies work in tandem in order to gain an understanding of the fundamental reductive activation of dioxygen by copper complexes. This review covers the most recent advancements in the structures, spectroscopy, and reaction mechanisms for dioxygen-activating copper proteins and relevant synthetic models thereof. An emphasis has also been placed on cofactor biogenesis, a fundamentally important process whereby biomolecules are post-translationally modified by the pro-enzyme active site to generate cofactors which are essential for the catalytic enzymatic reaction. Significant questions remaining in copper-ion-mediated O2-activation in copper proteins are addressed.

Copper(I)-Dioxygen Adducts and Copper Enzyme Mechanisms

Primary copper(I)-dioxygen (O₂) adducts, cupric-superoxide complexes, have been proposed intermediates in copper-containing dioxygen-activating monooxygenase and oxidase enzymes. Here, mechanisms of C-H activation by reactive copper-(di)oxygen intermediates are discussed, with an emphasis on cupric-superoxide species. Over the past 25 years, many synthetically derived cupric-superoxide model complexes have been reported. Due to the thermal instability of these intermediates, early studies focused on increasing their stability and obtaining physical characterization. More recently, in an effort to gain insight into the possible substrate oxidation step in some copper monooxygenases, several cupric-superoxide complexes have been used as surrogates to probe substrate scope and reaction mechanisms. These cupric superoxides are capable of oxidizing substrates containing weak O-H and C-H bonds. Mechanistic studies for some enzymes and model systems have supported an initial hydrogen-atom abstraction via the cupric-superoxide complex as the first step of substrate oxidation.

Grains, growth, and grooving

We report the in situ investigation of grain growth and grain boundary migration, performed with a variable-temperature scanning tunneling microscope (STM) on a polycrystalline gold film. Atomic step resolution allowed us to identify the individual grains and, thus, also the grain boundaries. Our special, thermal-drift-compensated STM design made it possible to follow the same sample area over large temperature intervals. In this way, we have directly observed grain boundary migration and grain growth. In a first quantitative analysis we correlate the observed, unexpected changes in surface roughness with the evolution of the grain and grain boundary configuration.