Enantioselective Benzylic Hydroxylation of Arylalkanes with H 2 O 2 in Fluorinated Alcohols in the Presence of Chiral Mn Aminopyridine Complexes

Investigating Ligand Sphere Perturbations on MnIII-Alkylperoxo Complexes

Manganese catalysts that activate hydrogen peroxide carry out several different hydrocarbon oxidation reactions with high stereoselectivity. The commonly proposed mechanism for these reactions involves a key manganese(III)-hydroperoxo intermediate, which decays via O-O bond heterolysis to generate a Mn(V)-oxo species that institutes substrate oxidation. Due to the scarcity of characterized MnIII-hydroperoxo complexes, MnIII-alkylperoxo complexes are employed to understand factors that affect the mechanism of the O-O cleavage. Herein, we report a series of novel complexes, including two room-temperature-stable MnIII-alkylperoxo species, supported by a new amide-containing pentadentate ligand (6Medpaq5NO2). We use a combination of spectroscopic methods and density functional theory computations to probe the effects of the electronic changes in the ligand sphere trans to the hydroxo and alkylperoxo units to thermal stability and reactivity. The structural characterizations for both MnII(OTf)(6Medpaq5NO2) and [MnIII(OH)(6Medpaq5NO2)](OTf) were obtained via single-crystal X-ray crystallography. A perturbation to the ligand sphere allowed for a marked increase in reactivity towards an organic substrate, a modest change in the distribution of the O-O cleavage products from homolytic and heterolytic pathways, and little change in thermal stability.

Biocatalytic Steroidal 9α-Hydroxylation and Fragmentation Enable the Concise Chemoenzymatic Synthesis of 9,10-Secosteroids

9,10-Secosteroids are an important group of marine steroids with diverse biological activities. Herein, we report a chemoenzymatic strategy for the concise, modular, and scalable synthesis of ten naturally occurring 9,10-secosteroids from readily available steroids in three to eight steps. The key feature lies in utilizing a Rieske oxygenase-like 3-ketosteroid 9α-hydroxylase (KSH) as the biocatalyst to achieve efficient C9-C10 bond cleavage and A-ring aromatization of tetracyclic steroids through 9α-hydroxylation and fragmentation. With synthesized 9,10-secosteroides, structure-activity relationship was evaluated based on bioassays in terms of previously unexplored anti-infective activity. This study provides experimental evidence to support the hypothesis that the biosynthetic pathway through which 9,10-secosteroids are formed in nature shares a similar 9α-hydroxylation and fragmentation cascade. In addition to the development of a biomimetic approach for 9,10-secosteroid synthesis, this study highlights the great potential of chemoenzymatic strategies in chemical synthesis.

Remote functionalization reactions in steroids: discovery and application

Research published between 2001 and 2022 on the functionalization of remote positions of steroids, as well as the use of this technique in the generation of biologically active compounds has been reviewed. In the first section of the analysis established and novel methods for activation of sites deemed to be remote were reported. A series of manganese- (mainly), rhodium-, ruthenium- and osmium-centered porphyrins as catalysts in the presence of PIDA as oxidant have effected hydroxylation at C-1, -5, -6, -7, -11, -14, -15, -16, -17, -20, -24 and -25. Dioxiranes have been utilized in inserting hydroxyl groups at the 5, 12, 14, 15, 16, 17, 20, 24 and 25 positions (tertiary centers for the most part). Alcohols at C-12 and -16 were oxidized further to ketones. The Schönecker oxidation, discovered and developed during the period, has revolutionized the selective functionalization at C-12 of steroids possessing a 17-keto group. In the presence of iron-centered PDP- and MCP-based catalysts, hydrogen peroxide and acetic acid, substrates tended to be hydroxylated at C-6 and -12, with further oxidation to ketones often accompanying this reaction. The hypohalite reaction, utilizing the more modern Suarez conditions (irradiation in the presence of iodine and PIDA), was reported to facilitate the insertion of a hydroxyl moiety five atoms away from an existing alcohol oxygen. Steroidal-3β-diazoacetates tend to decompose on heating with di-rhodium-centered catalysts while activating carbons four or five atoms away. Chromium- and iron-based acetates were observed to functionalize C-5 and -25. Other reactions involving ring cleavage and halogenation, ketone irradiation and α-hydroxylation of ethers were also covered. The syntheses of compounds with marked biological activity from readily available steroids is described in the second section of the study. Cyclopamine, cephalostatin-1, ritterazine B and three polyhydroxypregnanaes (pergularin, utendin and tomentogenin) were generated in sequences in which a key step required hydroxylation at C-12 using the Schönecker reaction. A crucial stage in the preparation of cortistatin A, the saundersioside core, eurysterol A, 5,6-dihydroglaucogenin C, as well as clinostatins A and B involved the functionalization of C-18 or -19 utilizing hypohalite chemistry. The synthetic route to xestobergsterol A, pavonin-4-aglycone and ouagabagenin included a transformation where ketone irradiation played a part in either producing a Δ14 or a C-19 activated steroid. The radical relay reaction, where a 17α-chloro-steroid was formed, was central in the generation of pythocholic acid. The lead tetraacetate reaction was pivotal in the functionalization of C-19 during the synthesis of cyclocitrinol.

Bioinspired Non-Heme Mn Catalysts for Regio- and Stereoselective Oxyfunctionalizations with H2 O2

In recent years, metalloenzymes-mediated highly selective oxidations of organic substrates under mild conditions have been inspiration for developing synthetic bioinspired catalyst systems, capable of conducting such processes in the laboratory (and, in the future, in industry), relying on easy-to-handle and environmentally benign oxidants such as H2 O2 . To date, non-heme manganese complexes with chiral bis-amino-bis-pyridylmethyl and structurally related ligands are considered as possessing the highest synthetic potential, having demonstrated the ability to mediate a variety of chemo- and stereoselective oxidative transformations, such as epoxidations, C(sp3 )-H hydroxylations and ketonizations, oxidative desymmetrizations, kinetic resolutions, etc. Furthermore, in the past few years non-heme Mn based catalysts have become the major platform for studies focused on getting insight into the molecular mechanisms of oxidant activation and (stereo)selective oxygen transfer, testing non-traditional hydroperoxide oxidants, engineering catalytic sites with enzyme-like substrate recognition-based selectivity, exploration of catalytic regioselectivity trends in the oxidation of biologically active substrates of natural origin. This contribution summarizes the progress in manganese catalyzed C-H oxygenative transformations of organic substrates, achieved essentially in the past 5 years (late 2018-2023).

Development of Catalytic Site-Selective C-H Oxidation

Direct C-H bond oxygenation is a strong and useful tool for the construction of oxygen functional groups. After Chen and White's pioneering works, various non-heme-type iron and manganese complexes were introduced, leading to strong development in this area. However, for this method to become a truly useful tool for synthetic organic chemistry, it is necessary to make further efforts to improve site-selectivity, and catalyst durability. Recently, we found that non-heme-type ruthenium complex cis-1 presents efficient catalysis in C(sp3 )-H oxygenation under acidic conditions. cis-1-catalysed C-H oxygenation can oxidize various substrates including highly complex natural compounds using hypervalent iodine reagents as a terminal oxidant. Moreover, the catalyst system can use almost stoichiometric water molecules as the oxygen source through reversible hydrolysis of PhI(OCOR)2 . It is a strong tool for producing isotopic-oxygen-labelled compounds. Moreover, the environmentally friendly hydrogen peroxide can be used as a terminal oxidant under acidic conditions.

Electronic structure contributions to O-O bond cleavage reactions for MnIII-alkylperoxo complexes

Synthetic manganese catalysts that activate hydrogen peroxide perform a variety of hydrocarbon oxidation reactions. The most commonly proposed mechanism for these catalysts involves the generation of a manganese(III)-hydroperoxo intermediate that decays via heterolytic O-O bond cleavage to generate a Mn(V)-oxo species that initiates substrate oxidation. Due to the paucity of well-defined MnIII-hydroperoxo complexes, MnIII-alkylperoxo complexes are often employed to understand the factors that affect the O-O cleavage reaction. Herein, we examine the decay pathways of the MnIII-alkylperoxo complexes [MnIII(OOtBu)(6Medpaq)]+ and [MnIII(OOtBu)(N4S)]+, which have distinct coordination environments (N5- and N4S-, respectively). Through the use of density functional theory (DFT) calculations and comparisons with published experimental data, we are able to rationalize the differences in the decay pathways of these complexes. For the [MnIII(OOtBu)(N4S)]+ system, O-O homolysis proceeds via a two-state mechanism that involves a crossing from the quintet reactant to a triplet state. A high energy singlet state discourages O-O heterolysis for this complex. In contrast, while quintet-triplet crossing is unfavorable for [MnIII(OOtBu)(6Medpaq)]+, a relatively low-energy single state accounts for the observation of both O-O homolysis and heterolysis products for this complex. The origins of these differences in decay pathways are linked to variations in the electronic structures of the MnIII-alkylperoxo complexes.

Titanium Salalen Catalyzed Enantioselective Benzylic Hydroxylation

The titanium complex of the cis-1,2-diaminocyclohexane (cis-DACH) derived Berkessel-salalen ligand is a highly efficient and enantioselective catalyst for the asymmetric epoxidation of terminal olefins with hydrogen peroxide ("Berkessel-Katsuki catalyst"). We herein report that this epoxidation catalyst also effects the highly enantioselective hydroxylation of benzylic C-H bonds with hydrogen peroxide. Mechanism-based ligand optimization identified a novel nitro-salalen Ti-catalyst of the highest efficiency ever reported for asymmetric catalytic benzylic hydroxylation, with enantioselectivities of up to 98 % ee, while overoxidation to ketone is marginal. The novel nitro-salalen Ti-catalyst also shows enhanced epoxidation efficiency, as evidenced by e.g. the conversion of 1-decene to its epoxide in 90 % yield with 94 % ee, at a catalyst loading of 0.1 mol-% only.

C-H Bonds as Functional Groups: Simultaneous Generation of Multiple Stereocenters by Enantioselective Hydroxylation at Unactivated Tertiary C-H Bonds

Enantioselective C-H oxidation is a standing chemical challenge foreseen as a powerful tool to transform readily available organic molecules into precious oxygenated building blocks. Here, we describe a catalytic enantioselective hydroxylation of tertiary C-H bonds in cyclohexane scaffolds with H2O2, an evolved manganese catalyst that provides structural complementary to the substrate similarly to the lock-and-key recognition operating in enzymatic active sites. Theoretical calculations unveil that enantioselectivity is governed by the precise fitting of the substrate scaffold into the catalytic site, through a network of complementary weak non-covalent interactions. Stereoretentive C(sp3)-H hydroxylation results in a single-step generation of multiple stereogenic centers (up to 4) that can be orthogonally manipulated by conventional methods providing rapid access, from a single precursor to a variety of chiral scaffolds.

Peracid Oxidation of Unactivated sp3 C-H Bonds: An Important Solvent Effect

The peracid oxidation of hydrocarbons in chlorinated solvents is a low yielding and poorly selective process. Through a combination of DFT calculations, spectroscopic studies, and kinetic measurement it is shown that the origin of this is electronic in nature and can be influenced through the addition of hydrogen bond donors (HBD) and hydrogen bond acceptors (HBA). Performing the reaction of a cycloalkane with mCPBA in a fluorinated alcohol solvent such as nonafluoro-tert-butanol (NFTB) or hexafluoroisopropanol (HFIP), which act as strong HBD and poor HBA, leads to significantly higher yields and selectivities being observed for the alcohol product. Application of the optimised reaction conditions allows for the selective oxidation of both cyclic and linear alkane substrates delivering the corresponding alcohol in up to 86 % yield. The transformation shows selectivity for tertiary centres over secondary centres and the oxidation of secondary centres is strongly influenced by stereoelectronic effects. Primary centres are not oxidised by this method. A simple computational model developed to understand this transformation provides a powerful tool to reliably predict the influence of substitution and functionality on reaction outcome.

A Predictably Selective Palladium-Catalyzed Aliphatic C-H Oxygenation

Direct oxygenation of nonactivated aliphatic C(sp³)-H groups with peroxycarboxylic acids in the presence of palladium tris(pyridylmethyl)amine complex (0.6 mol %) is reported, providing the corresponding hydroxylated derivatives in up to 94% yields. The oxidation of 3° C-H groups occurs stereospecifically, with the catalyst system demonstrating extremely high sensitivity to electronic effects (adamantane oxidation: 3°:2° up to >300). This suggests potential applications for the 3°-regioselective oxidative functionalization of complex molecules of natural origin.

Hydrogen Bonding-Assisted and Nonheme Manganese-Catalyzed Remote Hydroxylation of C-H Bonds in Nitrogen-Containing Molecules

The development of catalytic systems capable of oxygenating unactivated C-H bonds with excellent site-selectivity and functional group tolerance under mild conditions remains a challenge. Inspired by the secondary coordination sphere (SCS) hydrogen bonding in metallooxygenases, reported herein is an SCS solvent hydrogen bonding strategy that employs 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) as a strong hydrogen bond donor solvent to enable remote C-H hydroxylation in the presence of basic aza-heteroaromatic rings with a low loading of a readily available and inexpensive manganese complex as a catalyst and hydrogen peroxide as a terminal oxidant. We demonstrate that this strategy represents a promising compliment to the current state-of-the-art protection approaches that rely on precomplexation with strong Lewis and/or Brønsted acids. Mechanistic studies with experimental and theoretical approaches reveal the existence of a strong hydrogen bonding between the nitrogen-containing substrate and HFIP, which prevents the catalyst deactivation by nitrogen binding and deactivates the basic nitrogen atom toward oxygen atom transfer and the α-C-H bonds adjacent to the nitrogen center toward H-atom abstraction. Moreover, the hydrogen bonding exerted by HFIP has also been demonstrated not only to facilitate the O-O bond heterolytic cleavage of a putative Mn^III-OOH precursor to generate Mn^V(O)(OC(O)CH₂Br) as an active oxidant but also to affect the stability and the activity of Mn^V(O)(OC(O)CH₂Br).

Chemoselective Oxyfunctionalization of Functionalized Benzylic Compounds with a Manganese Catalyst

Whilst allowing for easy access to synthetically versatile motifs and for modification of bioactive molecules, the chemoselective benzylic oxidation reactions of functionalized alkyl arenes remain challenging. Reported in this study is a new non‐heme Mn catalyst stabilized by a bipiperidine‐based tetradentate ligand, which enables methylene oxidation of benzylic compounds by H₂O₂, showing high activity and excellent chemoselectivity under mild conditions. The protocol tolerates an unprecedentedly wide range of functional groups, including carboxylic acid and derivatives, ketone, cyano, azide, acetate, sulfonate, alkyne, amino acid, and amine units, thus providing a low‐cost, more sustainable and robust pathway for the facile synthesis of ketones, increase of complexity of organic molecules, and late‐stage modification of drugs.

Synthesis and Characterization of Bimetallic Nanoclusters Stabilized by Chiral and Achiral Polyvinylpyrrolidinones. Catalytic C(sp3)-H Oxidation

Second-generation chiral-substituted poly-N-vinylpyrrolidinones (CSPVPs) (-)-1R and (+)-1S were synthesized by free-radical polymerization of (3aR,6aR)- and (3aS,6aS)-5-ethenyl-tetrahydro-2,2-dimethyl-4H-1,3-dioxolo[4,5-c]pyrrol-4-one, respectively, using thermal and photochemical reactions. They were produced from respective d-isoascorbic acid and d-ribose. In addition, chiral polymer (-)-2 was also synthesized from the polymerization of (S)-3-(methoxymethoxy)-1-vinylpyrrolidin-2-one. Molecular weights of these chiral polymers were measured using HRMS, and the polymer chain tacticity was studied using ¹³C NMR spectroscopy. Chiral polymers (-)-1R, (+)-1S, and (-)-2 along with poly-N-vinylpyrrolidinone (PVP, MW 40K) were separately used in the stabilization of Cu/Au or Pd/Au nanoclusters. CD spectra of the bimetallic nanoclusters stabilized by (-)-1R and (+)-1S showed close to mirror-imaged CD absorption bands at wavelengths 200-300 nm, revealing that bimetallic nanoclusters' chiroptical responses are derived from chiral polymer-encapsulated nanomaterials. Chemo-, regio-, and stereo-selectivity was found in the catalytic C-H group oxidation reactions of complex bioactive natural products, such as ambroxide, menthofuran, boldine, estrone, dehydroabietylamine, 9-allogibberic acid, and sclareolide, and substituted adamantane molecules, when catalyst Cu/Au (3:1) or Pd/Au (3:1) stabilized by CSPVPs or PVP and oxidant H₂O₂ or t-BuOOH were applied. Oxidation of (+)-boldine N-oxide 23 using NMO as an oxidant yielded 4,5-dehydroboldine 27, and oxidation of (-)-9-allogibberic acid yielded C6,15 lactone 47 and C6-ketone 48.

Site and Enantioselective Aliphatic C-H Oxidation with Bioinspired Chiral Complexes

Selective oxidation of aliphatic C-H bonds stands as an unsolved problem in organic synthesis, with the potential to offer novel paths for preparing molecules of biological interest. The quest for reagents that can perform this class of reactions finds oxygenases and their mechanisms of action as inspiration motifs. Among the numerous families of synthetic catalysts that have been explored, complexes with linear tetraazadentate ligands combining two aliphatic amines and two aromatic amine heterocycles display a structural versatility proven instrumental in the design of C-H oxidation reactions showing site and enantioselectivities, not accessible by conventional oxidants. This manuscript makes a review of recent advances in the field.

Low-Spin and High-Spin Perferryl Intermediates in Non-Heme Iron Catalyzed Oxidations of Aliphatic C-H Groups

The selectivity patterns of iron catalysts of the Fe(PDP) family in aliphatic C-H oxidation with H₂ O₂ have been studied (PDP=N,N'-bis(pyridine-2-ylmethyl)-2,2'-bipyrrolidine). Cyclohexane, adamantane, 1-bromo-3,7-dimethyloctane, 3,7-dimethyloctyl acetate, (-)-acetoxy-p-menthane, and cis-1,2-dimethylcyclohexane were used as substrates. The studied catalyst systems generate low-spin (S=1/2) oxoiron(V) intermediates or high-spin (S=3/2) oxoiron(V) intermediates, depending on the electron-donating ability of remote substituents at the pyridine rings. The low-spin perferryl intermediates demonstrate lower stability and higher reactivity toward aliphatic C-H groups of cyclohexane than their high-spin congeners, according to the measured self-decay and second-order rate constants k₁ and k₂ . Unexpectedly, there appears to be no uniform correlation between the spin state of the oxoiron(V) intermediates, and the chemo- and regioselectivity of the corresponding catalyst systems in the oxidation of the considered substrates. This contrasts with the asymmetric epoxidations by the same catalyst systems, in which case the epoxidation enantioselectivity increases when passing from the systems featuring the more reactive low-spin perferryl intermediates to those with their less reactive high-spin congeners.

Exploration of highly electron-rich manganese complexes in enantioselective oxidation catalysis; a focus on enantioselective benzylic oxidation

The development of highly electron-rich manganese complexes for enantioselective benzylic oxidation (and asymmetric epoxidation) is described, to provide chiral benzylic alcohols and epoxides in good yields and enantioselectivites.

Catalytic Enantioselective Methylene C(sp3)-H Hydroxylation Using a Chiral Manganese Complex/Carboxylic Acid System

Achieving direct C-H hydroxylation in a highly diastereo- and enantioselective manner is still a challenging goal. This reaction is mainly hindered by the potential for overoxidation of the generated alcohols as well as low stereoselectivity. Herein, we present an enantioselective benzylic C-H hydroxylation catalyzed by a manganese complex, H₂O₂, and a carboxylic acid in 2,2,2-trifluoroethanol. The benzylic alcohols were successfully furnished in excellent diastereoselectivities (up to >95:5) and enantioselectivities (up to 95% ee). As a highlight of this work, high diastereoselectivity of C-H hydroxylation could be achieved by tuning the amount of carboxylic acid additive.

Enantioselective oxygenation of exocyclic methylene groups by a manganese porphyrin catalyst with a chiral recognition site

The natural enzyme cytochrome P450 is widely recognised for its unique ability to catalyse highly selective oxygen insertion reactions into unactivated C–H bonds under mild conditions. Its exceptional potential for organic synthesis served as an inspiration for the presented biomimetic hydroxylation approach. Via a remote hydrogen bonding motif a high enantioselectivity in the manganese-catalysed oxygenation of quinolone analogues (27 examples, 18–64% yield, 80–99% ee) was achieved. The site-selectivity was completely altered in favour of a less reactive but more accessible position.

A Mn porphyrin complex with a remote hydrogen bonding motif induces a high enantioselectivity in the oxygenation of 3-alkylquinolones. Compared to an achiral Mn complex, the site-selectivity was completely altered in favour of less reactive methylene groups.

Palladium aminopyridine complexes catalyzed selective benzylic C–H oxidations with peracetic acid

Palladium complexes with tripodal ligands of the tpa family efficiently catalyze benzylic C–H oxidation of various substrates with peracetic acid, affording the corresponding ketones in high yields (up to 100%), at <1 mol% catalyst loadings.