Layer‐Wise Titania Growth Within Dimeric Organic Functional Group Viologen Periodic Mesoporous Organosilica as Efficient Photocatalyst for Oxidative Formic Acid Decomposition

Isomerization-induced fluorescence enhancement of two new viologen derivatives: mechanism insight and DFT calculations

The dark-colored viologen radical cations are unstable in air and easily fade, thus greatly limiting their applications. If a suitable substituent is introduced into the structure, it will have the dual function of chromism and luminescence, which will broaden its application field. Here, Vio1·2Cl and Vio2·2Br were synthesized by introducing aromatic acetophenone and naphthophenone substituents into the viologen structure. The keto group (-CH₂CO-) on the substituents is prone to isomerize into the enol structure (-CH[double bond, length as m-dash]COH-) in organic solvents, especially in DMSO, resulting in a larger conjugated system to stabilize the molecular structure and enhance fluorescence. The time-dependent fluorescence spectrum shows obvious keto-to-enol isomerization-induced fluorescence enhancement. The quantum yield also increased significantly (T = 1 day, Φ_Vio1 = 25.81%, Φ_Vio2 = 41.44%; T = 7 days, Φ_Vio1 = 31.48%, and Φ_Vio2 = 54.40%) in DMSO. The NMR and ESI-MS data at different times further confirmed that the fluorescence enhancement was caused by isomerization, and no other fluorescent impurities were produced in solution. DFT calculations show that the enol form is almost coplanar throughout the molecular structure, which is conducive to stabilizing the structure and enhancing fluorescence. The fluorescence emission peaks of the keto and enol structures of Vio1²⁺ and Vio2²⁺ were at 416-417 nm and 563-582 nm, respectively. The fluorescence relative oscillator strength of Vio1²⁺ and Vio2²⁺ enol structures is significantly higher than that of keto structures (f value changes from 1.53 to 2.63 for Vio1²⁺ and from 1.62 to 2.81 for Vio2²⁺), indicating stronger fluorescence emission of the enol structure. The calculated results are in good agreement with the experimental results. Vio1·2Cl and Vio2·2Br are the first examples of isomerization-induced fluorescence enhancement of viologen derivatives, which shows strong solvatofluorochromism under UV light, making up for the disadvantage that it is easy for a viologen radical to fade in air, and providing a new strategy for designing and synthesizing viologen materials with strong fluorescence.

Recent catalytic applications of MXene-based layered nanomaterials

The urgent issues related to the catalytic processes and energy applications have accelerated the development of hybrid and smart materials. MXenes are a new family of atomic layered nanostructured materials that require considerable research. Tailorable morphologies, strong electrical conductivity, great chemical stability, large surface-to-volume ratios, tunable structures, among others are some significant characteristics that make MXenes appropriate for various electrochemical reactions, including dry reforming of methane, hydrogen evolution reaction, methanol oxidation reaction, sulfur reduction reaction, Suzuki-Miyaura coupling reaction, water-gas shift reaction, and so forth. MXenes, on the other hand, have a fundamental drawback of agglomeration, as well as poor long-term recyclability and stability. One possibility for overcoming the restrictions is the fusion of nanosheets or nanoparticles with MXenes. Herein, the relevant literature on the synthesis, catalytic stability and reusability, and applications of several MXene-based nanocatalysts are deliberated including the merits and cons of the newer MXene-based catalysts.

Improvement of photocatalytic degradation of methyl orange by impregnation of natural clay with nickel: optimization using the Box-Behnken design (BBD)

In this research work, the photocatalytic degradation of methyl orange dye was studied on nickel oxide supported on a natural Moroccan clay (Ni/NC). These catalysts have been prepared by dry impregnation of a nickel nitrate solution with different weight percentages (5, 10, 20% NiO). Experimental responses were obtained by a Box-Behnken (BBD) experimental design by varying the catalyst mass, solution pH, and initial dye concentration at three levels (low, medium, and high). The prepared catalysts were characterized using powder X-ray diffraction (XRD) to assess crystallinity and structure, Fourier transform infrared spectroscopy (FTIR) to detect different functional groups, scanning electron microscopy (SEM) combined with energy dispersive X-ray (EDX) analysis to study the surface morphology, and the optical characteristics of the catalysts were studied using absorption and diffuse reflectance measurements in the UV-visible range. The photocatalytic activity of the catalysts was evaluated in aqueous solutions under UV irradiation. ANOVA (analysis of variance) test is employed to recognize the significant factors and their interactions and then give the model equation for the percent dye degradation. The optimal values of the studied factors were determined by numerical optimization, and the results showed that about 100% degradation of the methyl orange dye could be achieved under the following optimal conditions, which are pH = 4.38, catalyst concentration of 0.99 g/L, and initial dye concentration of 30.42 mg/L.

Polymeric graphitic carbon nitride layers decorated with erbium oxide and enhanced photocatalytic performance under visible light irradiation

Developing and implementing visible light active organic-inorganic hybrid semiconductor nanomaterials with enhanced photocatalytic properties find newer environmental and energy treatment capabilities. Here, we are reporting polymeric g-C₃N₄ layers coated with different propositions of erbium oxide nanoparticles, characterized using XPS, UV-Vis-DRS, FT-IR, HR-TEM, FE-SEM, elemental mapping, XRD and surface area techniques and its photocatalytic activities were evaluated under visible light irradiations. The hybrid nanocomposite materials possess better crystalline nature and erbium oxide particles were on the surface of polymeric g-C₃N₄. The surface area and bandgap energy of the polymeric g-C₃N₄-erbium oxide (5 wt%) nanohybrid composite were 99.9 m²/g and 2.52 eV. The photocatalytic activities as prepared nanohybrid composites were assessed for the oxidation of orange G dye molecules in the presence of visible light and were highly active in a broader range of pH with the presence of various inorganic anions. The rate of photocatalytic oxidation of dye molecules varied from 4.79 × 10^-4 to 1.77 × 10^-4 min^-1 for the initial concentration of 5 to 20 ppm and retained its activities above 95% up to three cycles of reusability. Hence, the organic-inorganic novel catalytic nanohybrid composite may find more comprehensive applications in the area of environmental and energy applications.

Covalent Organic Framework as a Metal-Free Photocatalyst for Dye Degradation and Radioactive Iodine Adsorption

Exploring a covalent organic framework (COF) material as an efficient metal-free photocatalyst and as an adsorbent for the removal of pollutants from contaminated water is very challenging in the context of sustainable chemistry. Herein, we report a new porous crystalline COF, C₆-TRZ-TPA COF, via segregation of donor-acceptor moieties through the extended Schiff base condensation between tris(4-formylphenyl)amine and 4,4',4″-(1,3,5-triazine-2,4,6-triyl)trianiline. This COF displayed a Brunauer-Emmett-Teller (BET) surface area of 1058 m² g^-1 with a pore volume of 0.73 cc g^-1. Again, extended π-conjugation, the presence of heteroatoms throughout the framework, and a narrow band gap of 2.2 eV, all these features collectively work for the environmental remediation in two different perspectives: it could harness solar energy for environmental clean-up, where the COF has been explored as a robust metal-free photocatalyst for wastewater treatment and as an adsorbent for iodine capture. In our endeavor of wastewater treatment, we have conducted the photodegradation of rose bengal (RB) and methylene blue (MB) as model pollutants since these are extremely toxic, are health hazard, and bioaccumulative in nature. The catalyst C₆-TRZ-TPA COF showed a very high catalytic efficiency of 99% towards the degradation of 250 parts per million (ppm) of RB solution in 80 min under visible light irradiation with the rate constant of 0.05 min^-1. Further, C₆-TRZ-TPA COF is found to be an excellent adsorbent as it efficiently adsorbed radioactive iodine from its solution as well as from the vapor phase. The material exhibits a very rapid iodine capturing tendency with an outstanding iodine vapor uptake capacity of 4832 mg g^-1.

Ultrasonically-assisted synthesis of CeO2 within WS2 interlayers forming type II heterojunction for a VOC photocatalytic oxidation

Here, we investigate the band structure, density of states, photocatalytic activity, and heterojunction mechanism of WS2 with CeO2 (CeO2@WS2) as a photoactive heterostructure. In this heterostructure, CeO2's growth within WS2 layers is achieved through ultrasonicating WS2 and intercalating CeO2's precursor within the WS2 interlayers, followed by hydrothermal treatment. Through a set of density functional calculations, we demonstrate that CeO2 and WS2 form an interface through a covalent bonding that can be highly stable. The electrochemical impedance spectroscopy (EIS) found that the CeO2@WS2 heterostructure exhibits a remarkably higher conductivity (22.23 mS cm-2) compared to either WS2 and CeO2, assignable to the interface in CeO2@WS2. Furthermore, in a physically mixed CeO2-WS2 where the interaction between particles is noncovalent, the resistance was significantly higher (0.67 mS cm-2), confirming that the heterostructure in the interface is covalently bonded. In addition, Mott-Schottky and the bandgap measurements through Tauc plots demonstrate that the heterojunction in CeO2 and WS2 is type II. Eventually, the CeO2@WS2 heterostructure indicated 446.7 µmol g -1 CO2 generation from photocatalytic oxidation of a volatile organic compound (VOC), formic acid, compared to WS2 and CeO2 alone.

Gold nanoparticle decorated dithiocarbamate modified natural boehmite as a catalyst for the synthesis of biologically essential propargylamines

Here, we prepare an Au NP decorated dithiocarbamate functionalized boehmite (γ-AlO(OH)@C-NHCS2H·AuNPs). This stepwise synthetic method gives an efficient, cost-effective, and green heterogenous Au-based nanocatalyst for the A3-coupling preparation of the biologically essential propargylamines. Different characterization methods, including FT-IR, XRD, SEM, TEM, EDX spectra, and elemental SEM-mapping, were employed to investigate the structure of the manufactured γ-AlO(OH)@C-NHCS2H·AuNPs. Then we used the prepared composite as a heterogeneous gold-based nanocatalyst for the one-pot A3-coupling preparation of propargyl amines by reacting a variety of aldehydes, amines, and phenylacetylene which exhibited promising results.

Acetone Factor in the Design of Cu4-, Cu6-, and Cu9-Based Cage Coppersilsesquioxanes: Synthesis, Structural Features, and Catalytic Functionalization of Alkanes

The present study describes a new feature in the self-assembly of cagelike copperphenylsilsesquioxanes: the strong influence of acetone solvates on cage structure formation. By this simple approach, a series of novel tetra-, hexa-, or nonacoppersilsesquioxanes were isolated and characterized. In addition, several new complexes of Cu₄ or Cu₆ nuclearity bearing additional nitrogen-based ligands (ethylenediamine, 2,2'-bipyridine, phenanthroline, bathophenanthroline, or neocuproine) were produced. Single-crystal X-ray diffraction studies established molecular architectures of all of the synthesized products. Several coppersilsesquioxanes represent a novel feature of cagelike metallasilsesquioxane (CLMS) in terms of molecular topology. A Cu₄-silsesquioxane complex with ethylenediamine (En) ligands was isolated via the unprecedented self-assembly of a partly condensed framework of silsesquioxane ligands, followed by the formation of a sandwich-like cage. Two prismatic Cu₆ complexes represent the different conformers─regular and elliptical hexagonal prisms, "cylinders", determined by the different orientations of the coordinated acetone ligands ("shape-switch effect"). A heterometallic Cu₄Na₄-sandwich-like derivative represents the first example of a metallasilsesquioxane complex with diacetone alcohol ligands formed in situ due to acetone condensation reaction. As a selected example, the compound [(Ph₆Si₆O₁₁)₂Cu₄En₂]·(acetone)₂ was explored in homogeneous oxidation catalysis. It catalyzes the oxidation of alkanes to alkyl hydroperoxides with hydrogen peroxide and the oxidation of alcohols to ketones with tert-butyl hydroperoxide. Radical species take part in the oxidation of alkanes. Besides, [(Ph₆Si₆O₁₁)₂Cu₄En₂]·(acetone)₂ catalyzes the mild oxidative functionalization of gaseous alkanes (ethane, propane, n-butane, and i-butane). Two different model reactions were investigated: (1) the oxidation of gaseous alkanes with hydrogen peroxide to give a mixture of oxygenates (alcohols, ketones, or aldehydes) and (2) the carboxylation of C_n gaseous alkanes with carbon monoxide, water, and potassium peroxodisulfate to give C_n+1 carboxylic acids (main products), along with the corresponding C_n oxygenates. For these reactions, the effects of acid promoter, reaction time, and substrate scope were explored. As expected for free-radical-type reactions, the alkane reactivity follows the trend C₂H₆ < C₃H₈ < n-C₄H₁₀ < i-C₄H₁₀. The highest total product yields were observed in the carboxylation of i-butane (up to 61% based on i-C₄H₁₀). The product yields and catalyst turnover numbers (TONs) are remarkable, given an inertness of gaseous alkanes and very mild reaction conditions applied (low pressures, 50-60 °C temperatures).

Integration of plasmonic AgPd alloy nanoparticles with single-layer graphitic carbon nitride as Mott-Schottky junction toward photo-promoted H2 evolution

Plasmonic AgPd alloy nanoparticles (AgPdNPs) decorated on single-layer carbon nitride (AgPdNPs/SLCN) for the designing of the Mott-Schottky junction were constructed with the ultrasonically assisted hydrothermal method and used toward photo evolution H2 from formic acid (FA) at near room temperature (30 °C). The Pd atom contains active sites that are synergistically boosted by the localized surface plasmon resonance (LSPR) effect of Ag atoms, leading to considerably enhanced photocatalytic properties. The photoactive AgPdNPs/SLCN obtained supreme catalytic activity to produce 50 mL of gas (H2 + CO2) with the initial turnover frequency of 224 h-1 under light irradiation. The catalyst showed stable catalytic performance during successive cycles.

Green synthesis of rGO-AgNP composite using Curcubita maxima extract for enhanced photocatalytic degradation of the organophosphate pesticide chlorpyrifos

In this study, Curcubita maxima leaves are used as a novel source for green synthesis of reduced graphene oxide - silver nanoparticle composite in a single pot. Characterization of the novel phyto source-driven composite was performed by UV-visible spectroscopy, Fourier transform infrared analysis, X-ray diffraction analysis, and field emission scanning electron microscopic methods. The assessment of degradation effect of chlorpyrifos by the synthesized nanocomposite was performed. The photocatalytic activity of the composite was demonstrated through two different processes as adsorption under room temperature and photocatalysis in the presence of sunlight. Different parameters such as pH, time, photocatalyst dose and pesticide concentration were optimized. The adsorption isotherms governing the photocatalytic adsorption process were investigated to predict the adsorption capacity of the synthesized nanocomposite. In addition, the results of antimicrobial activity of the nanocomposite against gram-positive, gram-negative bacteria and antifungal activity were also been found to be highly promising to utilize this composite for the removal of microbial contaminations in wastewater treatment.

Porous biomorphic silica@ZnO nanohybrids as the effective photocatalysts under visible light

In this study, zinc oxide nanohybrids based on functionalized bio-silica were synthesized and used for the degradation of Congo red under visible light. Diatom was used as a Si natural source with hierarchical nanostructures to produce porous silica support. Functionalized porous silica is a good candidate for direct immobilization of metal oxide and therefore of interest as the catalyst. Here, six hybrids of functionalized bio-silica and ZnO were synthesized and characterized by FT-IR, XRD, SEM/EDX, BET/BJH, and UV-Vis spectroscopy. Then, the synthesized catalysts were subjected to degradation of different anionic azo dyes (Congo red, methyl orange, and methyl red) under visible light irradiation. The results show the decrease of band gap in bio-silica@ZnO hybrids which enhance the photocatalytic properties of hybrids due to the shifting to visible light adsorption. The best photocatalytic result of SiO₂@ZnO hybrid was obtained from chitosan-based amino-functionalized silica due to the best functionalization, highest loading of ZnO, low band gap, and filling of diatom pores with functional groups.

Functionalization and Modification of Polyethylene Terephthalate Polymer by AgCl Nanoparticles under Ultrasound Irradiation as Bactericidal

Polyethylene terephthalate polymer (PET) is widely used in diverse areas. In the current study, the surface of PET is modified in two steps in order to improve the quality. At first, the polymer was functionalized with carboxylic groups, and Fourier transform infrared spectroscopy studies were used to verify functionalization. Then, AgCl nanoparticles were synthesized on COOH functional groups on the surface of PET using a sonochemistry method by sequential dipping of the functionalized polymer in an alternating bath of potassium chloride and silver nitrate under ultrasonic irradiation. The effects of ultrasonic irradiation power, the number of dipping steps, and pH on the growth of AgCl nanoparticles as effective parameters on size and density of synthesized Ag nanoparticles were studied. The results of scanning electron microscopy studies showed that the size and density of AgCl nanoparticles under ultrasonic irradiation with a power of 100 W are better than those of AgCl nanoparticles under irradiation with a power of 30 W. Also, by 15 times dipping the polymer into the reagent solutions in pH = 9, the modified polymer with a greater number of nanoparticles with suitable size can be reached. Antibacterial properties of PET containing AgCl nanoparticles were investigated against six Gram-positive and Gram-negative bacteria species, and the results showed significant antibacterial activity, while functionalized PET did not have a significant effect on both types of bacteria.

Recent Advances in g-C3 N4 -Based Photocatalysts for Pollutant Degradation and Bacterial Disinfection: Design Strategies, Mechanisms, and Applications

Emerging photocatalytic technology promises to provide an effective solution to the global energy crisis and environmental pollution. Graphite carbon nitride (g-C₃ N₄ ) has gained extensive attention in the scientific community due to its excellent physical and chemical properties, attractive electronic band structure, and low cost. In this paper, research progress in design strategies for g-C₃ N₄ -based photocatalysts in the past five years is reviewed from the perspectives of nanostructure construction, element doping, and heterostructure construction. To clarify the relationship between application requirements and structural design, variations in the morphology, electronic energy band structure, light absorption capacity, as well as interfacial charge transfer caused by various modification strategies are discussed in detail. The recent applications of g-C₃ N₄ -based photocatalysts for pollutant degradation and bacterial disinfection are reviewed, as well as the antimicrobial activity and degradation mechanisms. Finally, current challenges and future development directions for the practical application of g-C₃ N₄ -based photocatalysts are tentatively discussed.

Single-pot tandem oxidative/C-H modification amidation process using ultrasmall PdNP-encapsulated porous organosilica nanotubes

Herein, we studied a single-pot method with a dual catalysis process towards the conversion of primary aromatic alcohols to amides using ultrasmall PdNPs of controlled uniform size (1.8 nm) inside hybrid mesoporous organosilica nanotubes (MO-NTs). The catalyst exhibited excellent performance in water under mild conditions and showed high stability. The catalytic activity towards the tandem oxidation of alcohols in the presence of amine salts and H2O2 to their corresponding amides without producing byproducts was evaluated, and high yields were obtained for all products. The structure of the organosilica nanotubes containing palladium nanoparticles was investigated using various characterization techniques such as XRD, TEM, BET, solid-state 29Si NMR and solid-state 13C CP MAS NMR. Catalyst recycling tests showed that the catalytic power of PdNPs@B-SNTs was preserved after 8 cycles and a slight decrease in catalyst activity was observed.

Towards sustainable coal industry: Turning coal bottom ash into wealth

Although the world is gradually moving towards renewable energy resources, the coal industry will continue to be a major energy supply sector in the foreseeable future. However, by-products such as coal fly ash (CFA), coal bottom ash (CBA), and boiler slag are generated during coal combustion, and have become a significant environmental concern. There is an urgent need for transdisciplinary efforts in research, policy, and practice to reduce these by-products substantially. Many studies have focused on the environmental management and comprehensive utilization of CFA. As a comparison, less attention has been paid to CBA. Therefore, this critical review provides a holistic picture of CBA, from the generation, fundamental characteristics, environmental concerns to potential applications, and benefits analysis. Based on the fundamental characteristics, CBA can be considered as a sustainable and renewable resource with great potential to produce value-added materials. High-value applications and current research related to CBA, including construction and ceramic industry, wastewater remediation, soil amelioration, energy catalysis, valuable metals recovery, and material synthesis, are systemically presented and compared. It emphasizes the environmental and economic benefits of the sustainable applications of CBA as well. Particularly, it indicates that CBA is a promising candidate in normal, lightweight, self-compacting, and ultra-high-performance concrete, which shows a reduction in both energy consumption and greenhouse gas emissions during concrete production. This work provides new insights into the greener and sustainable applications of CBA, and it will offer a practical guide for the sustainable development of the coal industry.

Recent advanced development of metal-loaded mesoporous organosilicas as catalytic nanoreactors

Ordered periodic mesoporous organosilicas have been widely applied in adsorption/separation/sensor technologies and the fields of biomedicine/biotechnology as well as catalysis. Crucially, surface modification with functional groups and metal complexes or nanoparticle loading has ensured high efficacy and efficiency. This review will highlight the current state of design and catalytic application of transition metal-loaded mesoporous organosilica nanoreactors. It will outline prominent synthesis approaches for the grafting of metal complexes, metal salt adsorption and in situ preparation of metal nanoparticles, and summarize the catalytic performance of the resulting mesoporous organosilica hybrid materials. Finally, the potential prospects and challenges of metal-loaded mesoporous organosilica nanoreactors are addressed.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity

This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu₆ cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu₈-based (6 and 7) and Cu₆-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu₆ cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C₅-C₈ cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

The behavior of surface acidity on photo-Fenton degradation of ciprofloxacin over sludge derived carbon: Performance and mechanism

Sludge derived carbon (SC) has been widely used in advanced oxidation processes as an effective and economic catalyst. In this study, we applied surface modified SC for the first time to catalyze the heterogeneous photo-Fenton process with ciprofloxacin, a highly concerned emerging contaminant, as a model substance. H₂SO₄ was used to acidify the SCs under varying acid dosages, temperatures, and reaction time lengths. The surface acidity of SCs was quantitatively characterized with NH₃-TPD. A strong correlation between the surface acidity and the catalytic activity was clearly demonstrated. The highest catalytic activity was obtained with SC whose acidity was 0.149 mmol·g^-1 after being modified with 6 mol·L^-1 H₂SO₄ at -20 ℃ for 24 h. In addition, XRD, XRF, BET, XPS, and HRTEM were also used to characterize the obtained SC. ·OH radicals were found to be the main reactive species by EPR. Ten transformation products were identified by GC-MS, based on which three possible reaction pathways were proposed.

Precisely regulating the acidity of mesoporous silica on the catalytic performance of 1-decene oligomerization

Optimization of the acidity of Al-MCM-41 catalysts to improve the catalytic performance of 1-decene oligomerization.

Biosynthesis of AgNPs onto the urea-based periodic mesoporous organosilica (AgxNPs/Ur-PMO) for antibacterial and cell viability assay

Nano-size silver particles were stabilized on the inner surfaces of urea based periodic mesoporous organosilica (Ur-PMO). Aqueous extract of Euphorbia leaves as a sustainable and green reducing agent was applied for Ag-nanoparticles growth into the Ur-PMO channels. Physical and chemical properties of organosilica materials synthesized using various techniques such as FT-IR, small-angle XRD, PXRD, FESEM, TEM, SEM-EDX and atomic absorption spectrometry (AAS) were examined. Finally, the AgNPs/Ur-PMO were investigated on cell viability assay. An in vitro cytotoxicity test using MMT assay displayed that the designed material has good biocompatibility and could be a promising candidate for biomedical applications. The results also showed that the AgNPs/Ur-PMO compounds (especially, PMO; 1.27% AgNPs) had relatively good antibacterial and antibiofilm effects. It seems that the use of these compounds in hospital environments can reduce nosocomial infections as well as reduce antibiotic-resistant bacteria.

Utilization of iron tailings to prepare high-surface area mesoporous silica materials

Iron tailings are fine, stable and complex materials, which are mainly composed of minerals and metal oxides. Residual silicon in iron tailings can be used to prepare mesoporous silica materials applied to energy storage, environmental protection and other fields. This paper reported a novel synthesis strategy from iron tailings to high-surface area hexagonally ordered mesoporous silica materials in an innovative non-hydrothermal system at room temperature. A pretreatment process involving acid leaching and hydrothermal alkaline reaction was vital to the successful utilization of iron tailings. X-ray fluorescence (XRF) data suggested that about 95% of the silicon of iron tailings changed to the silicate as a silicon source. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂-adsorption-desorption isotherms, Fourier transform infrared (FTIR) spectroscopy, Thermogravimetry and differential scanning calorimetry (TG-DSC) and ²⁹Si solid-state nuclear magnetic resonance (NMR) spectroscopy. The SAXRD patterns of mesoporous silica materials exhibited an intense (100) diffraction peak and two weak (110, 200) diffraction peaks, corresponding to characteristic of the ordered mesoporous lattice. TEM images further confirmed the hexagonally ordered porous structure of mesoporous silica materials. The WAXRD patterns and ²⁹Si MAS NMR spectra of the samples indicated that mesoporous silica materials were composed of amorphous SiO₂. The obtained mesoporous silica materials had a high surface area of 1915 m²/g and pore volume of 1.32 cm³/g. Furthermore, the evolution from iron tailings to mesoporous silica materials was elucidated and a proposed synthesis mechanism was discussed. Collectively, these results provided an insight into efficient recycling of iron tailings and the production of advanced functional materials from solid waste.

Assessment of GO/ZnO nanocomposite for solar-assisted photocatalytic degradation of industrial dye and textile effluent

An ecofriendly and solar light-responsive graphene oxide wrapped zinc oxide nanohybrid has been synthesized hydrothermally using lemon and honey respectively as chelating and complexing agents. By tuning the reaction conditions, a heterostructure between GO and ZnO has been formed during synthesis. The photocatalytic activity of the synthesized nanohybrid was investigated by degradation of hazardous organic textile dye (methylene blue) as well as wastewater under natural solar light. The nanohybrid exhibited excellent photocatalytic activity towards degradation (~ 89%) of methylene blue (MeB). Furthermore, along with decolorization, 71% of mineralization was also achieved. Interestingly, the nanohybrid has been found to be reusable up to 4 cycles without significant loss of photocatalytic activity. Along with this, the physicochemical parameters of the wastewater generated from textile industry have been also monitored before and after exposure to nanohybrid. The results revealed significant reduction in chemical oxygen demand (COD) (96.33%), biochemical oxygen demand (BOD) (96.23%), and total dissolved solids (TDS) (20.85%), suggesting its potential applicability in textile wastewater treatment.

Sodium alginate passivated CuInS2/ZnS QDs encapsulated in the mesoporous channels of amine modified SBA 15 with excellent photostability and biocompatibility

We herein report the synthesis of CuInS₂/ZnS (CIS/ZnS) quantum dots (QDs) via a greener method followed by sodium alginate (SA) passivation and encapsulation into mesoporous channels of amine modified silica (SBA15-NH₂) for improved photostability and biocompatibility. The as-synthesized CIS/ZnS QDs exhibited near infrared emission even after SA passivation and silica encapsulation. Transmission electron microscopy (TEM) and Small angle X-ray diffraction (XRD) revealed the mesoporous nature of the SBA-15 remained stable after loading with the SA-CIS/ZnS QDs. The effective encapsulation of SA-CIS/ZnS QDs inside the pores of SBA15-NH₂ matrix was confirmed by Brunauer-Emmett-Teller (BET) pore volume analysis while the interaction between the QDs and SBA15-NH₂ was confirmed using Fourier transform infrared (FTIR) spectroscopy. The photostability of the QDs was greatly enhanced after these modifications. The resultant SA-CIS/ZnS-SBA15-NH₂ (QDs-silica) composite possessed remarkable biocompatibility towards lung cancer (A549) and kidney (HEK 293) cell lines making it a versatile material for theranostic applications.

Central-radial bi-porous nanocatalysts with accessible high unit loading and robust magnetic recyclability for 4-nitrophenol reduction

Central-radial bi-porous nanocatalysts were synthesized by derivation from dendritic porous supports with hierarchical inorganic functional layers. The nanostructure exhibited a high unit loading capacity, accessible internal catalytic sites and protective mesoporous shell encapsulation. The nanocatalysts were utilized for efficient and stable heterogeneous catalytic reduction of 4-nitrophenol to 4-aminophenol with robust magnetic recyclability.

Boosting Aerobic Oxidation of Alcohols via Synergistic Effect between TEMPO and a Composite Fe3O4/Cu-BDC/GO Nanocatalyst

Fabrication of a nanocomposite catalyst via a novel and efficient strategy remains a challenge; Fe₃O₄ nanoparticles anchored on graphene oxide (GO) sheet-supported metal-organic frameworks (MOFs). In this study, the physicochemical properties of the ensuing Fe₃O₄/Cu-BDC/GO are investigated using Fourier transform infrared spectrum, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, energy-dispersive X-ray detector, and atomic absorption spectroscopy. The salient features of the nanocomposite such as Cu-MOF, synergistic effect with GO sheets, and magnetic separation characteristics make it an excellent ternary heterostructure for aerobic oxidation of alcohols. The proposed nanocatalyst and co-catalyst 2,2,6,6-tetramethylpiperidine-N-oxyl substantially enhance the catalytic performance for the aerobic oxidation under very mild and sustainable reaction conditions. The heterogeneity of Fe₃O₄/Cu-BDC/GO composite catalyst is affirmed with the added advantage that the initial activity is well maintained even after seven cycles.

Steam reforming of formaldehyde for generating hydrogen and coproducing carbon nanotubes for enhanced photosynthesis

NiO/MoO₃ exhibits high catalytic activity, and the carbon deposition can be used as nanopesticide.