Evidence of Mixed‐Ligand Complexes in Cu−CHA by Reaction of Cu Nitrates with NO/NH 3 at Low Temperature

Quantitative Kinetic Insights from Operando-UV/Vis Spectroscopy: An Application to NH3-SCR of NOx on Cu-CHA Catalysts

We employ UV/Vis Diffuse Reflectance spectroscopy directly coupled with a packed bed flow reactor to extract quantitative kinetic information. We use as a show-case the CuII/CuI redox dynamics during the reduction half cycle of the NH3-Selective Catalytic Reduction (SCR) on Cu-CHA catalysts. Our measurements enable quantification of the fraction of oxidized Cu, reconstructed by Multivariate Curve Resolution (MCR) together with monitoring of the gas-phase evolution during the reaction. These data both on the dynamics of the gas-phase and of the active site oxidation state have been used to assess the reduction half cycle rate equation and estimate the rate constant. Our results in terms of reaction orders and kinetic constant are in line with previous findings in the literature. Overall, our results demonstrate that the combined analysis of the UV spectra and of the gas-phase dynamics provides converging and unparalleled kinetic insight: this approach effectively resolves ambiguities concerning RHC kinetics and mechanism. More in general, this work provides evidence that operando spectroscopy can be used to extract quantitative kinetic information on catalytic cycles.

Kinetic Monte Carlo Simulations of Low-Temperature NH3-SCR over Cu-Exchanged Chabazite

Cu-exchanged chabazite (Cu-CHA) is widely used for ammonia assisted selective catalytic reduction of nitrogen oxides (NH3-SCR). The Cu+ ions are at low temperatures solvated by NH3 forming mobile [Cu(NH3)2]+ complexes. The dynamic behaviour of the complexes is critical as O2 adsorption requires a pair of complexes to form a [Cu2(NH3)4O2]2+ peroxo-species over which NO couples with NH3. Here we introduce a first principles-based kinetic Monte Carlo approach to explore the effect of the Al-distribution on the reaction kinetics of NH3-SCR over Cu-CHA. The method allows us to scrutinize the interplay between the pairing of [Cu(NH3)2]+ complexes and the reaction landscape for the NH3-SCR reaction over the peroxo-complex. The Al-distribution affects the stability of the [Cu(NH3)2]+ pairs as well as the kinetic parameters of the SCR-reaction. The turn-over frequency is determined by the stability of the [Cu(NH3)2]+ pairs and the relative strength of NO and NH3 adsorption once a pair is present. The results establish the hierarchy of effects that influences the performance of Cu-CHA over NH3-SCR and provide a computational basis for further development of the Cu-CHA material.

Effect of SO2 and SO3 Exposure to Cu-CHA on Surface Nitrate and N2O Formation for NH3-SCR

We report effects of SO2 and SO3 exposure on ammonium nitrate (AN) and N2O formation in Cu-CHA used for NH3-SCR. First-principles calculations and several characterizations (ICP, BET, XRD, UV-vis-DRS) were applied to characterize the Cu-CHA material and speciation of sulfur species. The first-principles calculations demonstrate that the SO2 exposure results in both (bi)sulfite and (bi)sulfate whereas the SO3 exposure yields only (bi)sulfate. Furthermore, SOx adsorption on framework-bound dicopper species is shown to be favored with respect to adsorption onto framework-bound monocopper species. Temperature-programmed reduction with H2 shows two clear reduction states and larger sulfur uptake for the SO3-exposed Cu-CHA compared to the SO2-exposed counterpart. Temperature-programmed desorption of formed ammonium nitrate (AN) highlights a significant decrease in nitrate storage due to sulfur species interacting with copper sites in the form of ammonium/copper (bi)bisulfite/sulfate. Especially, highly stable sulfur species from SO3 exposure influence the NO2-SCR chemistry by decreasing the N2O selectivity during NH3-SCR whereas an increased N2O selectivity was observed for the SO2-exposed Cu-CHA sample. This study provides fundamental insights into how SO2 and SO3 affect the N2O formation during ammonium nitrate decomposition in NH3-SCR applications, which is a very important topic for practical applications.

Unraveling the NH3-SCR-DeNOx Mechanism of Cu-SSZ-13 Variants by Spectroscopic and Transient Techniques

Commercial SSZ-13 zeolite with different n(Si)/n(Al) ratios and from different suppliers were subjected to a post-synthetic treatment in order to create mesopores of up to 15 nm. Furthermore, the materials were modified with copper ions and thoroughly physico-chemically characterized. The modified textural properties varied the nature of copper species, and thus, activity in the selective catalytic reduction of NOx with ammonia (NH3-SCR-DeNOx). Pulsed-field gradient nuclear magnetic resonance (PFG-NMR) studies with hexane as probe liquid revealed improved intracrystalline diffusion for some Cu-containing SSZ-13 materials. The NH3-SCR-DeNOx pathways are verified via in situ DR UV-Vis, in situ FT-IR and EPR, temperature-programmed studies as well as SSITKA studies that provide a mechanistic understanding of the reaction. Kinetic modelling results demonstrate the highest NH3-SCR-DeNOx reaction rates and up to 20 % lower energy barriers with n(Si)/n(Al) ratio of 6.5 for all modified forms (i. e., (NH4)Cu-SSZ-13_6.5 and Cu-SSZ-13_6.5_NaOH/0.1) and cause only negligible parasitic ammonia oxidation. The modelling of the stop-flow experiments further demonstrates that the SCR pathway via the HONO surface intermediate is present but barely contributes to the overall NO conversion compared to the dominant path between adsorbed NH3 and NO from the gas phase.

Plasma-assisted manipulation of vanadia nanoclusters for efficient selective catalytic reduction of NOx

Supported nanoclusters (SNCs) with distinct geometric and electronic structures have garnered significant attention in the field of heterogeneous catalysis. However, their directed synthesis remains a challenge due to limited efficient approaches. This study presents a plasma-assisted treatment strategy to achieve supported metal oxide nanoclusters from a rapid transformation of monomeric dispersed metal oxides. As a case study, oligomeric vanadia-dominated surface sites were derived from the classic supported V2O5-WO3/TiO2 (VWT) catalyst and showed nearly an order of magnitude increase in turnover frequency (TOF) value via an H2-plasma treatment for selective catalytic reduction of NO with NH3. Such oligomeric surface VOx sites were not only successfully observed and firstly distinguished from WOx and TiO2 by advanced electron microscopy, but also facilitated the generation of surface amide and nitrates intermediates that enable barrier-less steps in the SCR reaction as observed by modulation excitation spectroscopy technologies and predicted DFT calculations.

Spatial Distribution of Brønsted Acid Sites Determines the Mobility of Reactive Cu Ions in the Cu-SSZ-13 Catalyst during the Selective Catalytic Reduction of NOx with NH3

The formation of dimer-Cu species, which serve as the active sites of the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR), relies on the mobility of CuI species in the channels of the Cu-SSZ-13 catalysts. Herein, the key role of framework Brønsted acid sites in the mobility of reactive Cu ions was elucidated via a combination of density functional theory calculations, in situ impedance spectroscopy, and in situ diffuse reflectance ultraviolet-visible spectroscopy. When the number of framework Al sites decreases, the Brønsted acid sites decrease, leading to a systematic increase in the diffusion barrier for [Cu(NH3)2]+ and less formation of highly reactive dimer-Cu species, which inhibits the low-temperature NH3-SCR reactivity and vice versa. When the spatial distribution of Al sites is uneven, the [Cu(NH3)2]+ complexes tend to migrate from an Al-poor cage to an Al-rich cage (e.g., cage with paired Al sites), which effectively accelerates the formation of dimer-Cu species and hence promotes the SCR reaction. These findings unveil the mechanism by which framework Brønsted acid sites influence the intercage diffusion and reactivity of [Cu(NH3)2]+ complexes in Cu-SSZ-13 catalysts and provide new insights for the development of zeolite-based catalysts with excellent SCR activity by regulating the microscopic spatial distribution of framework Brønsted acid sites.

Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV-Vis Spectroscopy and Time-Dependent DFT Calculation

The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., μ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.

Interplay between copper redox and transfer and support acidity and topology in low temperature NH3-SCR

Low-temperature standard NH₃-SCR over copper-exchanged zeolite catalysts occurs on NH₃-solvated Cu-ion active sites in a quasi-homogeneous manner. As key kinetically relevant reaction steps, the reaction intermediate Cu^II(NH₃)₄ ion hydrolyzes to Cu^II(OH)(NH₃)₃ ion to gain redox activity. The Cu^II(OH)(NH₃)₃ ion also transfers between neighboring zeolite cages to form highly reactive reaction intermediates. Via operando electron paramagnetic resonance spectroscopy and SCR kinetic measurements and density functional theory calculations, we demonstrate here that such kinetically relevant steps become energetically more difficult with lower support Brønsted acid strength and density. Consequently, Cu/LTA displays lower Cu atomic efficiency than Cu/CHA and Cu/AEI, which can also be rationalized by considering differences in their support topology. By carrying out hydrothermal aging to eliminate support Brønsted acid sites, both Cu^II(NH₃)₄ ion hydrolysis and Cu^II(OH)(NH₃)₃ ion migration are hindered, leading to a marked decrease in Cu atomic efficiency for all catalysts.

Influence of ion mobility on the redox and catalytic properties of Cu ions in zeolites

This contribution aims at analysing the current understanding about the influence of Al distribution, zeolite topology, ligands/reagents and oxidation state on ions mobility in Cu-zeolites, and its relevance toward reactivity of the metal sites. The concept of Cu mobilization has been originally observed in the presence of ammonia, favouring the activation of oxygen by formation of NH3 oxo-bridged complexes in zeolites and opening a new perspective about the chemistry in single-site zeolite-based catalysts, in particular in the context of the NH3-mediated Selective Catalytic Reduction of NO x (NH3-SCR) processes. A different mobility of bare Cu+/Cu2+ ions has been documented too, showing for Cu+ a better mobilization than for Cu2+ also in absence of ligands. These concepts can have important consequences for the formation of Cu-oxo species, active and selective in other relevant reactions, such as the direct conversion of methane to methanol. Here, assessing the structure, the formation pathways and reactivity of Cu-oxo mono- or multimeric moieties still represents a challenging playground for chemical scientists. Translating the knowledge about Cu ions mobility and redox properties acquired in the context of NH3-SCR reaction into the field of direct conversion of methane to methanol can have important implications for a better understanding of transition metal ions redox properties in zeolites and for an improved design of catalysts and catalytic processes.

Rate Controlling in Low-Temperature Standard NH3-SCR: Implications from Operando EPR Spectroscopy and Reaction Kinetics

A series of seven Cu/SSZ-13 catalysts with Si/Al = 6.7 are used to elucidate key rate-controlling factors during low-temperature standard ammonia-selective catalytic reduction (NH₃-SCR), via a combination of SCR kinetics and operando electron paramagnetic resonance (EPR) spectroscopy. Strong Cu-loading-dependent kinetics, with Cu atomic efficiency increasing nearly by an order of magnitude, is found when per chabazite cage occupancy for Cu ion increases from ∼0.04 to ∼0.3. This is due mainly to the release of intercage Cu transfer constraints that facilitates the redox chemistry, as evidenced from detailed Arrhenius analysis. Operando EPR spectroscopy studies reveal strong connectivity between Cu-ion dynamics and SCR kinetics, based on which it is concluded that under low-temperature steady-state SCR, kinetically most relevant Cu species are those with the highest intercage mobility. Transient binuclear Cu species are mechanistically relevant species, but their splitting and cohabitation are indispensable for low-temperature kinetics.

New insights into the NH3-selective catalytic reduction of NO over Cu-ZSM-5 as revealed by operando spectroscopy

To control diesel vehicle NO _x emissions, Cu-exchanged zeolites have been applied in the selective catalytic reduction (SCR) of NO using NH₃ as reductant. However, the harsh hydrothermal environment of tailpipe conditions causes irreversible catalyst deactivation. The aggregation of isolated Cu²⁺ brings about unselective ammonia oxidation along with the main NH₃-SCR reaction. An unusual 'dip' shaped NO conversion curve was observed in the steamed zeolite Cu-ZSM-5, resulting from the undesired NH₃ oxidation that produced NO. Here we gain further insights into the NH₃-SCR reaction and its deactivation by employing operando UV-vis diffuse reflectance spectroscopy (DRS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) on fresh and steamed zeolite Cu-ZSM-5. We found that tetragonally distorted octahedral Cu²⁺ with associated NH₃ preferentially forms during low temperature NH₃-SCR (<250 °C) in fresh Cu-ZSM-5. The high coordination number of Cu²⁺ ensures the availability for high coverage of nitrate intermediates. Whilst in the steamed Cu-ZSM-5, [Cu _x (OH)_2x-1]⁺ oligomers/clusters in pseudo-tetrahedral symmetry with coordinated NH₃ accumulated during the low-temperature NH₃-SCR reaction. These clusters presented a strong adsorption of surface NH₃ and nitrates/nitric acid at low temperatures and therefore limited the reaction between surface species in the steamed Cu-ZSM-5. Further release of NH₃ with increased reaction temperature favors NH₃ oxidation that causes the drop of NO conversion at ∼275 °C. Moreover, competitive adsorption of NH₃ and nitrates/nitric acid occurs on shared Lewis-acidic adsorption sites. Prompt removal of surface nitrates/nitric acid by NO avoids the surface blockage and tunes the selectivity by alternating nitrate-nitrite equilibrium. The formation of adsorbed NO₂ and HNO _x points to the necessity of an acid adsorbent in practical applications. The structural similarity under the NH₃-SCR reaction and unselective NH₃ oxidation confirmed the entanglement of these two reactions above 250 °C.

Revealing the Synergistic Deactivation Mechanism of Hydrothermal Aging and SO2 Poisoning on Cu/SSZ-13 under SCR Condition

In real-world application, Cu/SSZ-13 simultaneously suffers severe deactivation from hydrothermal aging and SO₂ poisoning during the periodic regeneration of diesel particulate filter (DPF). Herein, we first investigated the synergistic deactivation mechanism of hydrothermal aging and SO₂ poisoning on Cu/SSZ-13 under SCR condition. Hydrothermal aging alone induces more severe degradation of selective catalytic reduction (SCR) performance than SO₂ poisoning alone, while the presence of SO₂ during hydrothermal aging causes further worse SCR performance compared with hydrothermal aging alone. Hydrothermal aging not only damages Si-OH-Al sites, particularly in four-membered ring (4MR) of the CHA cage, but also brings the conversion of ZCuOH, leading to the formation of inactive CuO/CuAlO_x species. By contrast, SO₂ poisoning alone is more prone to promote the transformation of ZCuOH to Z₂Cu. Synergistic deactivation of hydrothermal aging and SO₂ poisoning would exacerbate the damage of Si-OH-Al sites and then the formation of CuO/CuAlO_x species. These results are expected to assist the knowledge-based catalyst design for diesel aftertreatment applications.

Promotion of the selective catalytic reduction of NOx with NH3 over microporous Cu-SSZ-13 by H2O and OH group at low temperatures: a density functional theory study

The successful commercialization of microporous Cu-SSZ-13 catalysts in the selective catalytic reduction (SCR) of NOx with NH3 has attracted extensive attention and debate on the mechanism of their excellent activity...

Investigating the role of Cu-oxo species in Cu-nitrate formation over Cu-CHA catalysts

The speciation of framework-interacting CuII sites in Cu-chabazite zeolite catalysts active in the selective catalytic reduction of NOx with NH3 is studied, to investigate the influence of the Al content on the copper structure and their reactivity towards a NO/O2 mixture. To this aim, three samples with similar Cu densities and different Si/Al ratios (5, 15 and 29) were studied using in situ X-ray absorption spectroscopy (XAS), FTIR and diffuse reflectance UV-Vis during pretreatment in O2 followed by the reaction. XAS and UV-Vis data clearly show the main presence of Z2CuII sites (with Z representing a framework negative charge) at a low Si/Al ratio, as predicted. EXAFS wavelet transform analysis showed a non-negligible fraction of proximal Z2CuII monomers, possibly stabilized into two 6-membered rings within the same cage. These sites are not able to form Cu-nitrates by interaction with NO/O2. By contrast, framework-anchored Z[CuII(NO3)] complexes with a chelating bidentate structure are formed in samples with a higher Si/Al ratio, by reaction of NO/O2 with Z[CuII(OH)] sites or structurally similar mono- or multi-copper Zx[CuIIxOy] sites. Linear combination fit (LCF) analysis of the XAS data showed good agreement between the fraction of Z[CuII(OH)]/Zx[CuIIxOy] sites formed during activation in O2 and that of Z[CuII(NO3)] complexes formed by reaction with NO/O2, further confirming the chemical inertia of Z2CuII towards these reactants in the absence of solvating NH3 molecules.

Selective catalytic reduction of NO with NH3 over Cu-exchanged CHA, GME, and AFX zeolites: a density functional theory study

Density functional theory calculations have been applied to study the selectivity caused by the cage size during the selective catalytic reduction of NO by NH₃ over the Cu-exchanged zeolites with cha, gme, and aft cages.

Selective catalytic reduction of NO over Cu-AFX zeolites: mechanistic insights from in situ/operando spectroscopic and DFT studies

In situ/operando spectroscopic experiments and DFT calculations unravel the redox mechanism of NH₃-SCR over Cu-AFX zeolites.

β-Cyclodextrin-Silica Hybrid: A Spatially Controllable Anchoring Strategy for Cu(II)/Cu(I) Complex Immobilization

The development of new strategies for spatially controllable immobilization has encouraged the preparation of novel catalysts based on the organic-inorganic hybrid concept. In the present paper, a Cu-based multi-structured silica catalyst has been prepared and fully characterized. The inclusion of Cu(II) in β-cyclodextrins has been exploited with the double aim to stabilize the metal and to act as a source of Cu(I) catalytic sites. Multi-technique characterization by infrared, UV-visible, electron microscopy and X-ray absorption spectroscopies of the fresh and exhaust catalysts provided information on the local structure, redox properties and stability of the investigated hybrid systems. The catalytic system showed that copper nanospecies were dispersed on the support and hardly affected by the catalytic tests, confirming the stabilizing effect of β-CD, and likely of the N1-(3-Trimethoxysilylpropyl) diethylenetriamine spacer, as deduced by X-ray absorption spectroscopy analysis. Overall, we demonstrate a feasible approach to efficiently anchor Cu(II) species and to obtain a reusable single-site hybrid catalyst well suited for Cu(I)-catalyzed alkyne-azide cycloaddition.

Structure and Reactivity of Oxygen-Bridged Diamino Dicopper(II) Complexes in Cu-Ion-Exchanged Chabazite Catalyst for NH3-Mediated Selective Catalytic Reduction

The NH3-mediated selective catalytic reduction (NH3-SCR) of NOx over Cu-ion-exchanged chabazite (Cu-CHA) catalysts is the basis of the technology for abatement of NOx from diesel vehicles. A crucial step in this reaction is the activation of oxygen. Under conditions for low-temperature NH3-SCR, oxygen only reacts with CuI ions, which are present as mobile CuI diamine complexes [CuI(NH3)2]+. To determine the structure and reactivity of the species formed by oxidation of these CuI diamine complexes with oxygen at 200 °C, we have followed this reaction, using a Cu-CHA catalyst with a Si/Al ratio of 15 and 2.6 wt% Cu, by X-ray absorption spectroscopies (XANES and EXAFS) and diffuse reflectance UV-Vis spectroscopy, with the support of DFT calculations and advanced EXAFS wavelet transform analysis. The results provide unprecedented direct evidence for the formation of a [Cu2(NH3)4O2]2+ mobile complex with a side-on μ-η2,η2-peroxo diamino dicopper(II) structure, accounting for 80-90% of the total Cu content. These [Cu2(NH3)4O2]2+ are completely reduced to [CuI(NH3)2]+ at 200 °C in a mixture of NO and NH3. Some N2 is formed as well, which suggests the role of the dimeric complexes in the low-temperature NH3-SCR reaction. The reaction of [Cu2(NH3)4O2]2+ complexes with NH3 leads to a partial reduction of the Cu without any formation of N2. The reaction with NO results in an almost complete reduction to CuI, under the formation of N2. This indicates that the low-temperature NH3-SCR reaction proceeds via a reaction of these complexes with NO.

Solvation and Mobilization of Copper Active Sites in Zeolites by Ammonia: Consequences for the Catalytic Reduction of Nitrogen Oxides

ConspectusCopper-exchanged chabazite (Cu-CHA) zeolites are catalysts used in diesel emissions control for the abatement of nitrogen oxides (NO_x) via selective catalytic reduction (SCR) reactions with ammonia as the reductant. The discovery of these materials in the early 2010s enabled a step-change improvement in diesel emissions aftertreatment technology. Key advantages of Cu-CHA zeolites over prior materials include their effectiveness at the lower temperatures characteristic of diesel exhaust, their durability under high-temperature hydrothermal conditions, and their resistance to poisoning from residual hydrocarbons present in exhaust. Fundamental catalysis research has since uncovered mechanistic and kinetic features that underpin the ability of Cu-CHA to selectively reduce NO_x under strongly oxidizing conditions and to achieve improved NO_x conversion relative to other zeolite frameworks, particularly at low exhaust temperatures and with ammonia instead of other reductants.One critical mechanistic feature is the NH₃ solvation of exchanged Cu ions at low temperatures (<523 K) to create cationic Cu-amine coordination complexes that are ionically tethered to anionic Al framework sites. This ionic tethering confers regulated mobility that facilitates interconversion between mononuclear and binuclear Cu complexes, which is necessary to propagate SCR through a Cu²⁺/Cu⁺ redox cycle during catalytic turnover. This dynamic catalytic mechanism, wherein single and dual metal sites interconvert to mediate different half-reactions of the redox cycle, combines features canonically associated with homogeneous and heterogeneous reaction mechanisms.In this Account, we describe how a unified experimental and theoretical interrogation of Cu-CHA catalysts in operando provided quantitative evidence of regulated Cu ion mobility and its role in the SCR mechanism. This approach relied on new synthetic methods to prepare model Cu-CHA zeolites with varied active-site structures and spatial densities in order to verify that the kinetic and mechanistic models describe the catalytic behavior of a family of materials of diverse composition, and on new computational approaches to capture the active-site structure and dynamics under conditions representative of catalysis. Ex situ interrogation revealed that the Cu structure depends on the conditions for the zeolite synthesis, which influence the framework Al substitution patterns, and that statistical and electronic structure models can enumerate Cu site populations for a known Al distribution. This recognition unifies seemingly disparate spectroscopic observations and inferences regarding Cu ion structure and responses to different external conditions. SCR rates depend strongly on the Cu spatial density and zeolite composition in kinetic regimes where Cu⁺ oxidation with O₂ becomes rate-limiting, as occurs at lower temperatures and under fuel-rich conditions. Transient experiments, ab initio molecular dynamics simulations, and statistical models relate these sensitivities to the mobility constraints imposed by the CHA framework on NH₃-solvated Cu ions, which regulate the pore volume accessible to these ions and their ability to pair and complete the catalytic cycle. This highlights the key characteristics of the CHA framework that enable superior performance under low-temperature SCR reaction conditions.This work illustrates the power of precise control over a catalytic material, simultaneous kinetic and spectroscopic interrogation over a wide range of reaction conditions, and computational strategies tailored to capture those reaction conditions to reveal in microscopic detail the mechanistic features of a complex and widely practiced catalysis. In doing so, it highlights the key role of ion mobility in catalysis and thus potentially a more general phenomenon of reactant solvation and active site mobilization in reactions catalyzed by exchanged metal ions in zeolites.

Detection of key transient Cu intermediates in SSZ-13 during NH3-SCR deNO x by modulation excitation IR spectroscopy

The small pore zeolite Cu-SSZ-13 is an efficient material for the standard selective catalytic reduction of nitrogen oxides (NO _x ) by ammonia (NH₃). In this work, Cu-SSZ-13 has been studied at 250 °C under high conversion using a modulation excitation approach and analysed with phase sensitive detection (PSD). While the complementary X-ray absorption near edge structure (XANES) spectroscopy measurements showed that the experiments were performed under cyclic Cu⁺/Cu²⁺ redox, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) experiments provide spectroscopic evidence for previously postulated intermediates Cu-N([double bond, length as m-dash]O)-NH₂ and Cu-NO₃ in the NH₃-SCR deNO _x mechanism and for the role of [Cu²⁺(OH^-)]⁺. These results therefore help in building towards a more comprehensive understanding of the reaction mechanism which to date has only been postulated in silico.

Mechanistic insights into the oxidation of copper(i) species during NH3-SCR over Cu-CHA zeolites: a DFT study

DFT calculations suggest that Cu(i) oxidation with O₂ as the sole oxidant plays a major role in the oxidation half cycle of standard NH₃-SCR over Cu-CHA zeolites.