Catalytic CO2 Reduction with Boron- and Aluminum Hydrides

Quo Vadis CO2 Activation: Catalytic Reduction of CO2 to Methanol Using Aluminum and Gallium/Carbon-based Ambiphiles

We report on so-called "hidden FLPs" (FLP: frustrated Lewis pair) consisting of a phosphorus ylide featuring a group 13 fragment in the ortho position of a phenyl ring scaffold to form five-membered ring structures. Although the formation of the Lewis acid/base adducts was observed in the solid state, most of the title compounds readily react with carbon dioxide to provide stable insertion products. Strikingly, 0.3-3.0 mol% of the reported aluminum and gallium/carbon-based ambiphiles catalyze the reduction of CO2 to methanol with satisfactory high selectivity and yields using pinacol borane as stoichiometric reduction equivalent. Comprehensive computational studies provided valuable mechanistic insights and shed more light on activity differences.

Quest for Active Species in Al/B-Catalyzed CO2 Hydrosilylation

We demonstrate the catalytic role of aluminum and boron centers in aluminum borohydride [(2-Me2CH2C6H4)(C6H5)Al(μ-H)2B(C6H5)2] (6) during carbon dioxide (CO2) hydrosilylation. Preliminary investigations into CO2 reduction using [(2-Me2NCH2C6H4)(H)Al(μ-H)]2 (1) and [Ph3C][B(3,5-C6H3Cl2)4] (2) in the presence of Et3SiH and PhSiH3 resulted in CH2(OSiR3)2 and CH3OSiR3, which serve as formaldehyde and methanol surrogates, respectively. In pursuit of identifying the active catalytic species, three compounds, B(3,5-C6H3Cl2)3 (3), [(2-Me2NCH2C6H4)(3,5-C6H3Cl2)Al(μ-H)2B(3,5-C6H3Cl2)2] (4), and [(2-Me2NCH2C6H4)2Al(THF)][B(3,5-C6H3Cl2)4] (5), were isolated. Among compounds 2-5, the highest catalytic conversion was achieved by 4. Further, 4 and 6 were prepared in a straightforward method by treating 1 with 3 and BPh3, respectively. 6 was found to be in equilibrium with 1 and BPh3, thus making the catalytic process of 6 more efficient than that of 4. Computational investigations inferred that CO2 reduction occurs across the Al-H bond, while Si-H activation occurs through a concerted mechanism involving an in situ generated aluminum formate species and BPh3.

Accelerating σ-Bond Metathesis at Sn(II) Centers

Molecular main-group hydride catalysts are attractive as cheap and Earth-abundant alternatives to transition-metal analogues. In the case of the latter, specific steric and electronic tuning of the metal center through ligand choice has enabled the iterative and rational development of superior catalysts. Analogously, a deeper understanding of electronic structure-activity relationships for molecular main-group hydrides should facilitate the development of superior main-group hydride catalysts. Herein, we report a modular Sn-Ni bimetallic system in which we systematically vary the ancillary ligand on Ni, which, in turn, tunes the Sn center. This tuning is probed using Sn L1 XAS as a measure of electron density at the Sn center. We demonstrate that increased electron density at Sn centers accelerates the rate of σ-bond metathesis, and we employ this understanding to develop a highly active Sn-based catalyst for the hydroboration of CO2 using pinacolborane. Additionally, we demonstrate that engineering London dispersion interactions within the secondary coordination sphere of Sn allows for further rate acceleration. These results show that the electronics of main-group catalysts can be controlled without the competing effects of geometry perturbations and that this manifests in substantial reactivity differences.

Three Oxidative Addition Routes of Alkali Metal Aluminyls to Dihydridoaluminates and Reactivity with CO2

Three distinct routes are reported to the soluble, dihydridoaluminate compounds, AM[Al(NONDipp )(H)2 ] (AM=Li, Na, K, Rb, Cs; [NONDipp ]2- =[O(SiMe2 NDipp)2 ]2- ; Dipp=2,6-iPr2 C6 H3 ) starting from the alkali metal aluminyls, AM[Al(NONDipp )]. Direct H2 hydrogenation of the heavier analogues (AM=Rb, Cs) produced the first examples of structurally characterized rubidium and caesium dihydridoaluminates, although harsh conditions were required for complete conversion. Using 1,4-cyclohexadiene (1,4-CHD) as an alternative hydrogen source in transfer hydrogenation reactions provided a lower energy pathway to the full series of products for AM=Li-Cs. A further moderation in conditions was noted for the thermal decomposition of the (silyl)(hydrido)aluminates, AM[Al(NONDipp )(H)(SiH2 Ph)]. Probing the reaction of Cs[Al(NONDipp )] with 1,4-CHD provided access to a novel inverse sandwich complex, [{Cs(Et2 O)}2 {Al(NONDipp )(H)}2 (C6 H6 )], containing the 1,4-dialuminated [C6 H6 ]2- dianion and representing the first time that an intermediate in the commonly utilized oxidation process of 1,4-CHD to benzene has been trapped. The synthetic utility of the newly installed Al-H bonds has been demonstrated by their ability to reduce CO2 under mild conditions to form the bis-formate AM[Al(NONDipp )(O2 CH)2 ] compounds, which exhibit a diverse series of eyecatching bimetallacyclic structures.

Highly Soluble Cyclic Organoalanes Based on Anionic Dicarbenes

Cyclic organoalane compounds [(ADCAr )AlH2 ]2 (ADCAr = ArC{(DippN)C}2 ; Dipp = 2,6-iPr2 C6 H3 ; Ar = Ph or 4-PhC6 H4 (Bp)) based on anionic dicarbene (ADC) frameworks have been reported as crystalline solids. Treatments of Li(ADCAr ) with LiAlH4 at room temperature afford [(ADCAr )AlH2 ]2 with the concomitant release of LiH. Compounds [(ADCAr )AlH2 ]2 are stable crystalline solids and are freely soluble in common organic solvents. They are annulated tricyclic compounds with an almost planar central C4 Al2 -core embedded between two peripheral 1,3-imidazole (C3 N2 ) rings. At room temperature, [(ADCPh )AlH2 ]2 readily reacts with CO2 to form two- and four-fold hydroalumination products [(ADCPh )AlH(OCHO)]2 and [(ADCPh )Al(OCHO)2 ]2 , respectively. Further hydroalumination reactivity of [(ADCPh )AlH2 ]2 has been shown with isocyanate (RNCO) and isothiocyanate (RNCS) species (R=alkyl or aryl group). All compounds have been characterized by NMR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction.

Diverse Cooperative Reactivity at a Square Planar Aluminium Complex and Catalytic Reduction of CO2

The use of a sterically demanding pincer ligand to prepare an unusual square planar aluminium complex is reported. Due to the constrained geometry imposed by the ligand scaffold, this four-coordinate aluminium centre remains Lewis acidic and reacts via differing metal-ligand cooperative pathways for activating ketones and CO₂ . It is also a rare example of a single-component aluminium system for the catalytic reduction of CO₂ to a methanol equivalent at room temperature.

Aluminium-Catalyzed Selective Hydroboration of Esters and Epoxides to Alcohols: C-O Bond Activation

In this work, the molecular aluminium dihydride complex bearing an N, N'-chelated conjugated bis-guanidinate (CBG) ligand is used as a catalyst for reducing a wide range of aryl and alkyl esters with good tolerance of alkene (C=C), alkyne (C≡C), halides (Cl, Br, I and F), nitrile (C≡N), and nitro (NO₂ ) functionalities. Further, we investigated the catalytic application of aluminium dihydride in the C-O bond cleavage of alkyl and aryl epoxides into corresponding branched Markovnikov ring-opening products. In addition, the chemoselective intermolecular reduction of esters over other reducible functional groups, such as amides and alkenes, has been established. Intermediates are isolated and characterized by NMR and HRMS studies, which confirm the probable catalytic cycles for the hydroboration of esters and epoxides.

Hydroboration and Deoxygenation of CO2 Mediated by a Gallium(I) Cation

Hydroboration of CO₂ to formoxy borane occurs under ambient conditions in acetonitrile using pinacolborane HBpin in the presence of gallium(I) cation [(Me₄TACD)Ga][BAr₄] (1; Me₄TACD = N,N',N″,N'''-tetramethyl-1,4,7,10-tetraazacyclododecane; Ar = C₆H₃-3,5-Me₂). Slow turnover was accompanied by side reactions including ligand scrambling of HBpin to give BH₃(CH₃CN) and crystalline B₂pin₃. When 1 was reacted with CO₂ alone, the formation of the gallium(III) carbonato complex [(Me₄TACD)Ga(κ₂-O₂CO)][BAr₄] (3) along with CO was observed. This complex was assumed to form via the unstable oxido cation [(Me₄TACD)Ga=O]⁺ (4). Reaction of 1 with N₂O in the presence of BPh₃ confirmed the formation of the oxido cation, which was spectroscopically characterized as a triphenylborane adduct [(Me₄TACD)Ga=O(BPh₃)][BAr₄] (4·BPh₃). CO was also detected when CO₂ was reacted with 1 in the presence of HBpin, suggesting that compound 3 may also be formed in initial stages of catalysis. Compound 3 reacts with HBpin to give formoxy borane, borane redistribution products, and an unidentified Me₄TACD-containing species 5, which was also observed in "catalytic" runs starting from 1, HBpin, and CO₂. Hydroboration of CO₂ using HBpin with slow turnover and competitive ligand scrambling was also observed in the presence of gallium(III) hydride dication [(Me₄TACD)GaH][BAr₄]₂ (2), which is unreactive toward CO₂ in the absence of HBpin.

Organoaluminum hydrides catalyzed hydroboration of carbonates, esters, carboxylic acids, and carbon dioxide

The reductive functionalization of the CO unit of carbonates, carboxylic acids, esters, and CO₂, respectively has received great attention since its introduction. This method is often used industrially for the synthesis of high value-added energy products in chemistry. This opens up a new way forward to reduce greenhouse gases and the consumption of traditional energy sources. Herein, we report an earth-abundant, cheap, and readily available aluminum dihydride, which can catalyze the reduction of a range of carbonates, esters, carboxylic acids, and CO₂, respectively in the presence of pinacolborane as a reducing agent. Moreover, we demonstrate that the reaction can proceed to obtain good yield products under mild conditions, with low catalyst loading and solvent-free reactions. The mechanism of the catalytic reduction of carbonates has been investigated.

s-Block Metal Catalysts for the Hydroboration of Unsaturated Bonds

The addition of a B-H bond to an unsaturated bond (polarized or unpolarized) is a powerful and atom-economic tool for the synthesis of organoboranes. In recent years, s-block organometallics have appeared as alternative catalysts to transition-metal complexes, which traditionally catalyze the hydroboration of unsaturated bonds. Because of the recent and rapid development in the field of hydroboration of unsaturated bonds catalyzed by alkali (Li, Na, K) and alkaline earth (Mg, Ca, Sr, Ba) metals, we provide a detailed and updated comprehensive review that covers the synthesis, reactivity, and application of s-block metal catalysts in the hydroboration of polarized as well as unsaturated carbon-carbon bonds. Moreover, we describe the main reaction mechanisms, providing valuable insight into the reactivity of the s-block metal catalysts. Finally, we compare these s-block metal complexes with other redox-neutral catalytic systems based on p-block metals including aluminum complexes and f-block metal complexes of lanthanides and early actinides. In this review, we aim to provide a comprehensive, authoritative, and critical assessment of the state of the art within this highly interesting research area.

Hydroboration of carbon dioxide with pinacolborane catalyzed by various aluminum hydrides: A comparative mechanistic study

In this work, density functional theory (DFT) calculations was performed to probe the catalytic viability of various neutral, cationic and anionic aluminum hydrides (AlH) in the hydroboration of CO2 with...

Reduction of CO2 with Aluminum Hydrides Supported with Ar-BIAN Radical-Anions (Ar-BIAN = 1,2-Bis(arylimino)acenaphthene)

The reactions of H₂AlCl with [(dpp-Bian)Na(Et₂O)_n] and [(Ar^BIG-Bian)Na(THF)] produce respective aluminum hydrides supported by radical-anionic 1,2-bis(arylimino)acenaphthene ligands, [(dpp-Bian)AlH₂] (1) and [(Ar^BIG-Bian)AlH₂(THF)] (2) (dpp-Bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene); Ar^BIG-Bian = 1,2-bis[(2,6-dibenzhydryl-4-methylphenyl)imino]acenaphthene). The reaction of 1 with CO₂ proceeds with reduction of both C═O bonds and results in diolate [{(dpp-Bian)Al(μ-O₂CH₂)}₂] (3). Complex 2 reacts with CO₂ to carbonate [{(Ar^BIG-Bian)Al(μ-OCH₂OCO₂)}₂] (4) that is a result of the insertion of CO₂ into the Al-O bond in diolate species formed initially. Aluminum monohydrides [(dpp-Bian)AlH(X)] (X = Cl, 5; Me, 6) react with CO₂ to form respective alumoxanes [{(dpp-Bian)AlX}₂(μ-O)] (X = Cl, 7 and X = Me, 8). Compounds 1-4, 7, and 8 have been characterized by ESR and IR spectroscopy, and their molecular structures have been determined by single-crystal X-ray analysis.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Pincer-Supported Gallium Complexes for the Catalytic Hydroboration of Aldehydes, Ketones and Carbon Dioxide

Gallium hydrides stabilised by primary and secondary amines are scarce due to their propensity to eliminate dihydrogen. Consequently, their reactivity has received limited attention. The synthesis of two novel gallium hydride complexes HGa(THF)[ON(H)O] and H₂Ga[μ²‐ON(H)O]Ga[ON(H)O] ([ON(H)O]²⁻=N,N‐bis(3,5‐di‐tert‐butyl‐2‐phenoxy)amine) is described and their reactivity towards aldehydes and ketones is explored. These reactions afford alkoxide‐bridged dimers through 1,2‐hydrogallation reactions. The gallium hydrides can be regenerated through Ga−O/B−H metathesis from the reaction of such dimers with pinacol borane (HBpin) or 9‐borabicyclo[3.3.1]nonane (9‐BBN). These observations allowed us to target the catalytic reduction of carbonyl substrates (aldehydes, ketones and carbon dioxide) with low catalyst loadings at room temperature.

Anti-Electrostatic Main Group Metal-Metal Bonds That Activate CO2

There has been growing interest in the CO₂ capture and reduction by transition-metal-free catalysts. Here we performed a proof-of-concept study using an ab initio valence bond method called the block-localized wave function (BLW) method. The integrated BLW and density function theory (DFT) computations demonstrated that heterobimetallic Ae⁺/Al(I) (Ae represents alkaline earth metals Mg and Ca) Lewis acid/base combinations without transition metals can facilely capture and activate CO₂. There are two remarkable findings in this study. The first concerns the ionic nature of the metal-metal bonds. The experimentally synthesized low valent aluminum compound with a bidentate β-diketiminate (BDI) ligand, or (BDI)Al(I) in brief, is a Lewis base due to the lone pair on the aluminum cation though overall Al(I) is positively charged. Al(I) can form ionic metal-metal bonds with the alkaline earth metals of the positively charged Lewis acids (BDI)Ae⁺. This type of ionic metal-metal bonds is counterintuitive and antielectrostatic as both metals carry positive charges. The second finding is the CO₂ activation mechanism. (BDI)Al(I) can effectively bind and activate CO₂ by transferring one electron to CO₂, and the resulting complex can be best expressed as [(BDI)Al(I)]⁺[CO₂]^-. The participation of (BDI)Ae⁺ further enhances the capture and activation of CO₂ by (BDI)Al(I).

Reduction of Carbon Dioxide with Ammonia-Borane under Ambient Conditions: Maneuvering a Catalytic Way

In the development of alternatives to the traditional catalytic hydrogenation of CO₂ with gaseous H₂, employing nongaseous H₂ storage compounds as potential reductants for catalytic transfer hydrogenation of CO₂ is promising. Ammonia-borane, due to its high hydrogen storage capacity (19.6 wt %), has been used for catalytic transfer hydrogenation of several organic unsaturated compounds. However, a similar protocol involving catalytic transfer hydrogenation of less reactive CO₂ with NH₃BH₃ is yet to be realized experimentally. Herein, we demonstrate the first catalytic CO₂ transfer hydrogenation process for generating formate salt with NH₃BH₃ under ambient conditions (1 atm and 30 °C) employing a cationic "Ir(III)-abnormal NHC" catalyst via an electrophilic NH₃BH₃ activation route. It exhibited an initial turnover frequency of 686 h^-1 and a high turnover number (TON) of ≈1300 in just 4 h. Most significantly, the catalyst was durable enough to maintain long-term activity, and upon only periodic recharging of NH₃BH₃, it furnished a total TON of >4200 in 10 h.

Reactions of a diborylstannylene with CO2 and N2O: diboration of carbon dioxide by a main group bis(boryl) complex

The reactions of the boryl-substituted stannylene Sn{B(NDippCH)2}2 (1) with carbon dioxide have been investigated and shown to proceed via pathways involving insertion into the Sn-B bond(s). In the first instance this leads to formation of the (boryl)tin(ii) borylcarboxylate complex Sn{B(NDippCH)2}{O2CB(NDippCH)2} (2), which has been structurally characterized and shown to feature a κ2 mode of coordination of the [(HCDippN)2BCO2]- ligand at the metal centre. 2 undergoes B-O reductive elimination in hexane solution (in the absence of further CO2) to give the boryl(borylcarboxylate)ester {(HCDippN)2B}O2C{B(NDippCH)2} (3) i.e. the product of formal diboration of carbon dioxide. Alternatively, 2 can assimilate a second equivalent of CO2 to give the homoleptic bis(borylcarboxylate) Sn{O2CB(NDippCH)2}2 (4), which can be prepared via an alternative route from SnBr2 and the potassium salt of [(HCDippN)2BCO2]-, and structurally characterized as its DMAP (N,N-dimethylaminopyridine) adduct. Structural and reactivity studies also point to the possibility for extrusion of CO from the [(HCDippN)2BCO2]- fragment to generate the boryloxy system [(HCDippN)2BO]-, a ligand which can be generated directly from 1via reaction with N2O. The initially formed unsymmetrical species Sn{B(NDippCH)2}{OB(NDippCH)2} has been shown to be amenable to crystallographic study in the solid state, but to undergo ligand redistribution in solution to generate a mixture of 1 and the bis(boryloxy) complex Sn{OB(NDippCH)2}2.

Zinc Hydride Catalyzed Chemoselective Hydroboration of Isocyanates: Amide Bond Formation and C=O Bond Cleavage

Herein, a remarkable conjugated bis-guanidinate (CBG) supported zinc hydride, [{LZnH}₂ ; L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr); Ar=2,6-Et₂ -C₆ H₃ }] (I) catalyzed partial reduction of heteroallenes via hydroboration is reported. A large number of aryl and alkyl isocyanates, including electron-donating and withdrawing groups, undergo reduction to obtain selectively N-boryl formamide, bis(boryl) hemiaminal and N-boryl methyl amine products. The compound I effectively catalyzes the chemoselective reduction of various isocyanates, in which the construction of the amide bond occurs. Isocyanates undergo a deoxygenation hydroboration reaction, in which the C=O bond cleaves, leading to N-boryl methyl amines. Several functionalities such as nitro, cyano, halide, and alkene groups are well-tolerated. Furthermore, a series of kinetic, control experiments and structurally characterized intermediates suggest that the zinc hydride species are responsible for all reduction steps and breaking the C=O bond.

Reversible Addition of Carbon Dioxide to Main Group Metal Complexes at Temperatures about 0 °C

The reaction of dialane [LAl-AlL] (1; L=dianion of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene, dpp-bian) with carbon dioxide results in two different products depending on solvent. In toluene at temperatures of about 0 °C, the reaction gives cycloadduct [L(CO₂ )Al-Al(O₂ C)L] (2), whereas in diethyl ether, the reaction affords oxo-bridged carbamato derivative [L(CO₂ )(Et₂ O)Al(μ-O)AlL] (3). The DFT and QTAIM calculations provide reasonable explanations for the reversible formation of complex 2 in the course of two subsequent (2+4) cycloaddition reactions. Consecutive transition states with low activation barriers were revealed. Also, the DFT study demonstrated a crucial effect of diethyl ether coordination to aluminium on the reaction of dialane 1 with CO₂ . The optimized structures of key intermediates were obtained for the reactions in the presence of Et₂ O; calculated thermodynamic parameters unambiguously testify the irreversible formation of the product 3.

Aluminum-Hydride-Catalyzed Hydroboration of Carbon Dioxide

This study describes the first use of a bis(phosphoranyl)methanido aluminum hydride, [ClC(PPh₂NMes)₂AlH₂] (2, Mes = Me₃C₆H₂), for the catalytic hydroboration of CO₂. Complex 2 was synthesized by the reaction of a lithium carbenoid [Li(Cl)C(PPh₂NMes)₂] with 2 equiv of AlH₃·NEtMe₂ in toluene at -78 °C. 2 (10 mol %) was able to catalyze the reduction of CO₂ with HBpin in C₆D₆ at 110 °C for 2 days to afford a mixture of methoxyborane [MeOBpin] (3a; yield: 78%, TOF: 0.16 h^-1) and bis(boryl)oxide [pinBOBpin] (3b). When more potent [BH₃·SMe₂] was used instead of HBpin, the catalytic reaction was extremely pure, resulting in the formation of trimethyl borate [B(OMe)₃] (3e) [catalytic loading: 1 mol % (10 mol %); reaction time: 60 min (5 min); yield: 97.6% (>99%); TOF: 292.8 h^-1 (356.4 h^-1)] and B₂O₃ (3f). Mechanistic studies show that the Al-H bond in complex 2 activated CO₂ to form [ClC(PPh₂NMes)₂Al(H){OC(O)H}] (4), which was subsequently reacted with BH₃·SMe₂ to form 3e and 3f, along with the regeneration of complex 2. Complex 2 also shows good catalytic activity toward the hydroboration of carbonyl, nitrile, and alkyne derivatives.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

1,2,4,5-Tetrakis(tetramethylguanidino)-3,6-diethynyl-benzenes: Fluorescent Probes, Redox-Active Ligands and Strong Organic Electron Donors

In this work, the change of reactivity induced by the introduction of two para-ethynyl substituents (CCSi(iPr)3 or CCH) to the organic electron-donor 1,2,4,5-tetrakis(tetramethylguanidino)-benzene is evaluated. The redox-properties and redox-state dependent fluorescence are evaluated, and dinuclear CuI and CuII complexes synthesized. The Lewis-acidic B(C6 F5 )3 substitutes the proton of the ethynyl -CCH groups to give new anionic -CCB(C6 F5 )3 - substituents, leading eventually to a novel dianionic strong electron donor in its diprotonated form. Its two-electron oxidation with dioxygen in the presence of a copper catalyst yields the first redox-active guanidine that is neutral (instead of cationic) in its oxidized form.

Dialumenes - aryl vs. silyl stabilisation for small molecule activation and catalysis

Main group multiple bonds have proven their ability to act as transition metal mimics in the last few decades. However, catalytic application of these species is still in its infancy. Herein we report the second neutral NHC-stabilised dialumene species by use of a supporting aryl ligand (3). Different to the trans-planar silyl-substituted dialumene (3Si), compound 3 features a trans-bent and twisted geometry. The differences between the two dialumenes are explored computationally (using B3LYP-D3/6-311G(d)) as well as experimentally. A high influence of the ligand's steric demand on the structural motif is revealed, giving rise to enhanced reactivity of 3 enabled by a higher flexibility in addition to different polarisation of the aluminium centres. As such, facile activation of dihydrogen is now achievable. The influence of ligand choice is further implicated in two different catalytic reactions; not only is the aryl-stabilised dialumene more catalytically active but the resulting product distributions also differ, thus indicating the likelihood of alternate mechanisms simply through a change of supporting ligand.

Ligand controlled reactivity: a trans-bent and twisted geometry enables dihydrogen activation and enhanced catalytic activity for NHC-stabilised dialumenes.

Mono- and Bimetallic Aluminum Alkyl, Alkoxide, Halide and Hydride Complexes of a Bulky Conjugated Bis-Guanidinate(CBG) Ligand and Aluminum Alkyls as Precatalysts for Carbonyl Hydroboration

Tetra-aryl-substituted symmetrical conjugated bis-guanidine (CBG) ligands such as L^1-3 (3H) [L(3H) = {(ArHN)(ArHN)C═N-C═NAr(NHAr)}; Ar = 2,6-Me₂-C₆H₃ (L¹(3H)), 2,6-Et₂-C₆H₃ (L²(3H)), and 2,6-ⁱPr₂-C₆H₃ (L³(3H))] have been employed to synthesize a series of four- and six-membered aluminum heterocycles (1-8) for the first time. Generally, aluminum complexes bearing N,N'- chelated guanidinate and β-diketiminate/dipyrromethene ligand systems form four- and six-membered heterocycles, respectively. However, the conjugated bis-guanidine ligand has the capability of forming both four- and six-membered heterocycles possessing multimetal centers within the same molecule; this is due to the presence of three acidic protons, which can be easily deprotonated (at least two protons) upon treatment with metal reagents. Both mono- and dinuclear aluminum alkyls and mononuclear aluminum alkoxide, halide, and hydride complexes have been structurally characterized. Further, we have demonstrated the potential of mononuclear, six-membered CBG aluminum dialkyls in catalytic hydroboration of a broad range of aldehydes and ketones with pinacolborane (HBpin).