Application of Wet Nanostructured Bacterial Cellulose as a Novel Hydrogel Bioanode for Microbial Fuel Cells

Recent progress of bacterial cellulose-based separator platform for lithium-ion and lithium‑sulfur batteries

Bacterial cellulose (BC) has recently attracted a lot of attention as a high-performance, low-cost separator substrate for a variety of lithium-ion (LIBs) and lithium‑sulfur batteries (LISs). BC-base can be used in the design and manufacture of separators, mainly because of its unique properties compared to traditional polyethylene/polypropylene separator materials, such as high mechanical properties, high safety, good ionic conductivity, and suitability for a variety of design and manufacturing needs. In this review, we briefly introduce the sources, production methods, and modification strategies of BC, and further describe the preparation methods and properties of BC battery separators for various LIBs and LISs.

Investigation of microbial fuel cell performance based on the nickel thin film modified electrodes

Microbial fuel cells (MFCs) are a self-sustaining and environmentally friendly system for the simultaneous was tewater treatment and bioelectricity generation. The type and material of the electrode are critical factors that can influence the efficiency of this treatment process. In this study, graphite plates and carbon felt were modified through the electrodeposition of nickel followed by the formation of a biofilm, resulting in conductive bio-anode thin film electrodes with enhanced power generation capacity. The structural and morphological properties of the electrode surfaces were characterized using X-ray diffraction, energy-dispersive X-ray spectroscopy, elemental mapping, and field-emission scanning electron microscopy techniques. Maximum voltage, current density, and power generation were investigated using a dual-chamber MFC equipped with a Nafion 117 membrane and bio-nickel-doped carbon felt (bio-Ni@CF) and bio-nickel-doped graphite plate (bio-Ni@GP) electrodes under constant temperature conditions. The polarization and power curves obtained using different anode electrodes revealed that the maximum voltage, power and current density achieved with the bio-Ni@CF electrode were 468.0 mV, 130.72 mW/m2 and 760.0 mA/m2 respectively. Moreover, the modified electrodes demonstrated appropriate stability and resistance during successful runs. These results suggest that nickel-doped carbon-based electrodes can serve as suitable and stable supported catalysts and conductors for improving efficiency and increasing power generation in MFCs.

Recent Implementations of Hydrogel-Based Microbial Electrochemical Technologies (METs) in Sensing Applications

Hydrogel materials have been used extensively in microbial electrochemical technology (MET) and sensor development due to their high biocompatibility and low toxicity. With an increasing demand for sensors across different sectors, it is crucial to understand the current state within the sectors of hydrogel METs and sensors. Surprisingly, a systematic review examining the application of hydrogel-based METs to sensor technologies has not yet been conducted. This review aimed to identify the current research progress surrounding the incorporation of hydrogels within METs and sensors development, with a specific focus on microbial fuel cells (MFCs) and microbial electrolysis cells (MECs). The manufacturing process/cost, operational performance, analysis accuracy and stability of typical hydrogel materials in METs and sensors were summarised and analysed. The current challenges facing the technology as well as potential direction for future research were also discussed. This review will substantially promote the understanding of hydrogel materials used in METs and benefit the development of electrochemical biosensors using hydrogel-based METs.

Response surface methodology to investigate the comparison of two carbon-based air cathodes for bio-electrochemical systems

Bio-electrochemical technologies can generate renewable electrical bioenergy from the oxidation of organic materials through the catalytic reactions of the microorganisms while treating the wastewater. In this study, the use of carbon aerogel as a novel catalyst with high porosity (the total pore volume of 1.84 cm³ g^-1) and high surface area (491.7 m²/g) for improving the oxygen reduction reaction (ORR) performance was compared to that of the conventional activated carbon, employed as an air cathode catalyst in bio-electrochemical systems, with the indigenous bacterial consortium. The electrochemical studies revealed the higher power efficiency in the use of carbon aerogel (with the maximum power density and current density of a 675 mWm^-2 and 33.1 mAm^-2, respectively), compared to the activated carbon (with the maximum power density and current density of 668.98 mWm^-2 and 23.2 mAm^-2, respectively). The performance of the two materials and optimum conditions for electricity production were examined using the Response Surface Method (RSM) as an optimal design method. Statistical analysis confirmed that the carbon aerogel performed better than the activated carbon in power production and facilitated cathodic redox reactions. Comparison of two catalysts showed that the redox reactions occurred in the presence of carbon aerogel more facilitated and in a wider range, produced 1.2 times more current (the maximum 2.1 and 1.69 mA current). Carbon aerogel, with a suitable load absorbance and resistance to oxidation at urban wastewater pH, can be, therefore, coated on electrodes to facilitate the oxidation-reduction reactions and electricity transmission.

Effect of different concentrations of substrate in microbial fuel cells toward bioenergy recovery and simultaneous wastewater treatment

Microbial fuel cells (MFC_S) is a promising and expanding technology able to eliminate various pollutants of wastewater while converting its chemical energy into power energy using biocatalysts. The potential application of double-chamber microbial fuel cell (DC-MFC) for chemical oxygen demand (COD) removal and generated power from wastewater in the different conditions is investigated. DC-MFC is operated with anaerobic sludge as an active biocatalyst in an anode section, an aerobic cathode section and a Nafion117 membrane as a separator. The performance of the bioreactor is determined with different concentrations of chemical oxygen demand (COD) loadings in the MFC process, in terms of COD removal, power generation and columbic efficiencies. The results illustrated that COD removal efficiency increased at the high concentrations of organic matter. So that at COD concentration of 2000.0 mg/L the highest COD removal efficiency (84%) was obtained. But with increasing substrate initial concentration to 10000.0 mg/L the efficiency decreased to 79%. The important outputs of the system like the highest voltage, maximum generated power, current density, and energy efficiency with the 100,000 mg/L COD are 447 mV, 50.7 mW/m², 570.0 mA/m², and 18.6%, respectively. The optical density levels increased due to bacterial growth while pH severely decreased in the anode chamber when using high-concentration substrates in the MFC.

Living Bacteria Directly Embedded into Electrospun Nanofibers: Design of New Anode for Bio-Electrochemical Systems

The aim of this work is the optimization of electrospun polymeric nanofibers as an ideal reservoir of mixed electroactive consortia suitable to be used as anodes in Single Chamber Microbial Fuel Cells (SCMFCs). To reach this goal the microorganisms are directly embedded into properly designed nanofibers during the electrospinning process, obtaining so called nanofiber-based bio-composite (bio-NFs). This research approach allowed for the designing of an advanced nanostructured scaffold, able to block and store the living microorganisms inside the nanofibers and release them only after exposure to water-based solutions and electrolytes. To reach this goal, a water-based polymeric solution, containing 5 wt% of polyethylene oxide (PEO) and 10 wt% of environmental microorganisms, is used as the initial polymeric solution for the electrospinning process. PEO is selected as the water-soluble polymer to ensure the formation of nanofiber mats offering features of biocompatibility for bacteria proliferation, environment-friendliness and, high ionic conductivity. In the present work, bio-NFs, based on living microorganisms directly encapsulated into the PEO nanofiber mats, were analyzed and compared to PEO-NFs made of PEO only. Scanning electron microscopy allowed researchers to confirm the rise of a typical morphology for bio-NFs, evidencing the microorganisms’ distribution inside them, as confirmed by fluorescence optical microscopy. Moreover, the latter technique, combined with optical density measurements, allowed for demonstrating that after electrospinning, the processed microorganisms preserved their proliferation capability, and their metabolic activity after exposure to the water-based electrolyte. To demonstrate that the energy-production functionality of exo-electrogenic microorganisms was preserved after the electrospinning process, the novel designed nanomaterials, were directly deposited onto carbon paper (CP), and were applied as anode electrodes in Single Chamber Microbial Fuel Cells (SCMFCs). It was possible to appreciate that the maximum power density reached by bio-NFs, which resulted in being double of the ones achieved with PEO-NFs and bare CP. SCMFCs with bio-NFs applied as anodic electrodes reached a current density value, close to (250 ± 5.2) mA m⁻², which resulted in being stable over time and was comparable with the one obtained with carbon-based electrode, thus confirming the good performance of the whole device.

Conducting polymer hydrogels as a sustainable platform for advanced energy, biomedical and environmental applications

Environmentally friendly polymeric materials and derivative technologies play increasingly important roles in the sustainable development of our modern society. Conducting polymer hydrogels (CPHs) synergizing the advantageous characteristics of conventional hydrogels and conducting polymers are promising to satisfy the requirements of environmental sustainability. Beyond their use in energy and biomedical applications that require exceptional mechanical and electrical properties, CPHs are emerging as promising contaminant adsorbents owing to their porous network structure and regulable functional groups. Here, we review the currently available strategies for synthesizing CPHs, focusing primarily on multifunctional applications in energy storage/conversion, biomedical engineering and environmental remediation, and discuss future perspectives and challenges for CPHs in terms of their synthesis and applications. It is envisioned to stimulate new thinking and innovation in the development of next-generation sustainable materials.

Comprehensive Review on Hydrogels

The conventional drug delivery systems have a long list of issues of repeated dosing and toxicity arising due to it. The hydrogels are the answer to them and offer a result that minimizes such activities and optimizes therapeutic benefits. The hydrogels proffer tunable properties that can withstand degradation, metabolism, and controlled release moieties. Some of the areas of applications of hydrogels involve wound healing, ocular systems, vaginal gels, scaffolds for tissue, bone engineering, etc. They consist of about 90% of the water that makes them suitable bio-mimic moiety. Here, we present a birds-eye view of various perspectives of hydrogels, along with their applications.

Investigation of CNT/PPy-Modified Carbon Paper Electrodes under Anaerobic and Aerobic Conditions for Phenol Bioremediation in Microbial Fuel Cells

The study presents the comparative bioelectrochemical treatment of phenol in anodic and cathodic compartments of four identical dual chambered microbial fuel cells (MFCs) with bare and multiwalled carbon nanotube/polypyrrole (MWCNT/PPy)-coated electrodes, respectively. It was observed that systems performing biocathodic treatment of phenol performed better as compared to the systems performing bioanodic treatment. The maximum power densities for bioanodic phenol treatment using bare and coated electrodes were found to be 469.038 and 560.719 mW/m2, while for biocathodic treatment, they were observed to be 604.804 and 650.557 mW/m2, respectively. The MFCs performing biocathodic treatment of phenol consistently showed higher chemical oxygen demand removal efficiency, Coulombic efficiency, and power density and indicated the better performance of the biocathodic bare (B-MFC) and coated (C-MFC) MFCs as compared to the bioanodic B-MFC and C-MFC. UV/vis spectrophotometry revealed that the MWCNT/PPy-coated carbon paper worked significantly better in the treatment of phenol with admirable treatment obtained within a week of the experiment as compared to the system with bare carbon paper. Cyclic voltammetry asserted better electrochemical activity of the MFC systems with coated electrodes in the treatment of phenol. The electrochemical impedance spectroscopy data also supported the better performance of biocathodic phenol treatment with lower internal and charge transfer resistances. The scanning electron microscopy images confirmed the active biofilm formation on the electrode surface. The study indicates MFC as a viable option for the treatment of recalcitrant chemical compounds with energy recovery.

MWCNT-coated cellulose nanopapers: Droplet-coating, process factors, and electrical conductivity performance

Electrically conductive cellulose nanopapers (EC-CNPaps) were fabricated by the droplet-coating of multiwall carbon nanotubes (MWCNTs) on cellulose nanopapers (CNPaps), and the effects of the process factors on the electrical conductivity of EC-CNPaps were investigated. The type of CNPaps (made of softwood nanofibrillated cellulose or bacterial cellulose nanofibres), the drying methods of CNPaps (air drying, freeze drying, and oven drying), the applied method for the stabilisation and the concentration of MWCNT-water solutions, and the droplet-coating temperatures (≈23 °C and ≈60 °C) were the examined variable factors. Overall, the oven-dried nanofibrillated cellulose paper as a substrate, 0.1 wt. % of the gum Arabic stabilised MWCNT-water solution ink, and the droplet coating at 60 °C were introduced as the optimum conditions of the examined process factors in this study.

Cellulose-based hydrogel materials: chemistry, properties and their prospective applications

Hydrogels based on cellulose comprising many organic biopolymers including cellulose, chitin, and chitosan are the hydrophilic material, which can absorb and retain a huge proportion of water in the interstitial sites of their structures. These polymers feature many amazing properties such as responsiveness to pH, time, temperature, chemical species and biological conditions besides a very high-water absorption capacity. Biopolymer hydrogels can be manipulated and crafted for numerous applications leading to a tremendous boom in research during recent times in scientific communities. With the growing environmental concerns and an emergent demand, researchers throughout the globe are concentrating particularly on naturally derived hydrogels due to their biocompatibility, biodegradability and abundance. Cellulose-based hydrogels are considered as useful biocompatible materials to be used in medical devices to treat, augment or replace any tissue, organ, or help function of the body. These hydrogels also hold a great promise for applications in agricultural activity, as smart materials and some other useful industrial purposes. This review offers an overview of the recent and contemporary research regarding physiochemical properties of cellulose-based hydrogels along with their applications in multidisciplinary areas including biomedical fields such as drug delivery, tissue engineering and wound healing, healthcare and hygienic products as well as in agriculture, textiles and industrial applications as smart materials.

Novel Applications of Microbial Fuel Cells in Sensors and Biosensors

A microbial fuel cell (MFC) is a type of bio-electrochemical system with novel features, such as electricity generation, wastewater treatment, and biosensor applications. In recent years, progressive trends in MFC research on its chemical, electrochemical, and microbiological aspects has resulted in its noticeable applications in the field of sensing. This review was consequently aimed to provide an overview of the most interesting new applications of MFCs in sensors, such as providing the required electrical current and power for remote sensors (energy supply device for sensors) and detection of pollutants, biochemical oxygen demand (BOD), and specific DNA strands by MFCs without an external analytical device (self-powered biosensors). Moreover, in this review, procedures of MFC operation as a power supply for pH, temperature, and organic loading rate (OLR) sensors, and also self-powered biosensors of toxicity, pollutants, and BOD have been discussed.

Energy generation through bioelectrochemical degradation of pentachlorophenol in microbial fuel cell

Bio-electrochemical degradation of pentachlorophenol was carried out in single as well as dual chambered microbial fuel cell (MFC) with simultaneous production of electricity. The maximum cell potential was recorded to be 787 and 1021 mV in single and dual chambered systems respectively. The results presented nearly 66 and 89% COD removal in single and dual chambered systems with corresponding power densities of 872.7 and 1468.85 mW m⁻² respectively. The highest coulombic efficiency for single and dual chambered counterparts was found to be 33.9% and 58.55%. GC-MS data revealed that pentachlorophenol was more effectively degraded under aerobic conditions in dual-chambered MFC. Real-time polymerase chain reaction showed the dominance of exoelectrogenic Geobacter in the two reactor systems with a slightly higher concentration in the dual-chambered system. The findings of this work suggested that the aerobic treatment of pentachlorophenol in cathodic compartment of dual chambered MFC is better than its anaerobic treatment in single chambered MFC in terms of chemical oxygen demand (COD) removal and output power density.

Bio-electrochemical degradation of pentachlorophenol was carried out in single as well as dual chambered microbial fuel cell (MFC) with simultaneous production of electricity.