Increased Cytotoxicity of Bimetallic Ultrasmall Silver-Platinum Nanoparticles (2 nm) on Cells and Bacteria in Comparison to Silver Nanoparticles of the Same Size

Ultrasmall nanoparticles (diameter 2 nm) of silver, platinum, and bimetallic nanoparticles (molar ratio of Ag:Pt 0:100; 20:80; 50:50; 70:30; 100:0), stabilized by the thiolated ligand glutathione, were prepared and characterized by transmission electron microscopy, differential centrifugal sedimentation, X-ray photoelectron spectroscopy, small-angle X-ray scattering, X-ray powder diffraction, and NMR spectroscopy in aqueous dispersion. Gold nanoparticles of the same size were prepared as control. The particles were fluorescently labeled by conjugation of the dye AlexaFluor-647 via copper-catalyzed azide-alkyne cycloaddition after converting amine groups of glutathione into azide groups. All nanoparticles were well taken up by HeLa cells. The cytotoxicity was assessed with an MTT test on HeLa cells and minimal inhibitory concentration (MIC) tests on the bacteria Escherichia coli and Staphylococcus xylosus. Notably, bimetallic AgPt nanoparticles had a higher cytotoxicity against cells and bacteria than monometallic silver nanoparticles or a physical mixture of silver and platinum nanoparticles. However, the measured release of silver ions from monometallic and bimetallic silver nanoparticles in water was very low despite the ultrasmall size and the associated high specific surface area. This is probably due to the surface protection by a dense layer of thiolated ligand glutathione. Thus, the enhanced cytotoxicity of bimetallic AgPt nanoparticles is caused by the biological environment in cell culture media, together with a polarization of silver by platinum.

Characterization of Nanoparticles in Diverse Mixtures Using Localized Surface Plasmon Resonance and Nanoparticle Tracking by Dark-Field Microscopy with Redox Magnetohydrodynamics Microfluidics

Redox magnetohydrodynamics (RMHD) microfluidics is coupled with dark-field microscopy (DFM) to offer high-throughput single-nanoparticle (NP) differentiation in situ and operando in a flowing mixture by localized surface plasmon resonance (LSPR) and tracking of NPs. The color of the scattered light allows visualization of the NPs below the diffraction limit. Their Brownian motion in 1-D superimposed on and perpendicular to the RMHD trajectory yields their diffusion coefficients. LSPR and diffusion coefficients provide two orthogonal modalities for characterization where each depends on a particle’s material composition, shape, size, and interactions with the surrounding medium. RMHD coupled with DFM was demonstrated on a mixture of 82 ± 9 nm silver and 140 ± 10 nm gold-coated silica nanospheres. The two populations of NPs in the mixture were identified by blue/green and orange/red LSPR and their scattering intensity, respectively, and their sizes were further evaluated based on their diffusion coefficients. RMHD microfluidics facilitates high-throughput analysis by moving the sample solution across the wide field of view absent of physical vibrations within the experimental cell. The well-controlled pumping allows for a continuous, reversible, and uniform flow for precise and simultaneous NP tracking of the Brownian motion. Additionally, the amounts of nanomaterials required for the analysis are minimized due to the elimination of an inlet and outlet. Several hundred individual NPs were differentiated from each other in the mixture flowing in forward and reverse directions. The ability to immediately reverse the flow direction also facilitates re-analysis of the NPs, enabling more precise sizing.

Incorporation of Antimicrobial Bio-Based Carriers onto Poly(vinyl alcohol-co-ethylene) Surface for Enhanced Antimicrobial Activity

A biobased rechargeable antimicrobial modification approach was developed using a covalent immobilization of food grade yeast cell wall particles on a model plastic film. We demonstrate the applications of this modification approach on poly(vinyl alcohol-co-ethylene) surface to inactivate inoculated bacteria with or without the presence of organic content, reducing the cross-contamination between food contact surface and model fresh produce, and inhibiting the growth of biofilms on the film surface. These biobased cell wall particle modified plastic films can enhance the binding of chlorine to the plastic surface in the form of N-halamine, extend the stability of chlorine against high organic content and ambient storage, and improve the rechargeability of the plastic films. Upon charging with chlorine, these modified plastic films inactivated 5 log of model Gram-negative bacteria (Escherichia coli O157:H7) and Gram-positive bacteria (Listeria innocua used as a surrogate of pathogenic Listeria monocytogenes) within 2 min of surface inoculation in water and within 20 min in an organic-rich aqueous environment. The modified plastic films prevented the transfer of bacteria and eliminated cross-contamination from the contaminated films to a spinach leaf surface, while 3 log CFU/leaf of bacteria were transferred from a contaminated native film to a noninoculated spinach surface. In addition, these modified plastic films reduced the adhesion of L. innocua cells by 2.7-3.6 log CFU/cm² compared with control films during extended incubation for biofilm formation. Overall, this study demonstrates the feasibility of this biobased food grade modification approach to reduce microbial contamination and improve produce safety in the food processing industry.

Antimicrobial Coatings for Food Contact Surfaces: Legal Framework, Mechanical Properties, and Potential Applications

Food contact surfaces (FCS) in food processing facilities may become contaminated with a number of unwanted microorganisms, such as Listeria monocytogenes, Escherichia coli O157:H7, and Staphylococcus aureus. To reduce contamination and the spread of disease, these surfaces may be treated with sanitizers or have active antimicrobial components adhered to them. Although significant efforts have been devoted to the development of coatings that improve the antimicrobial effectiveness of FCS, other important coating considerations, such as hardness, adhesion to a substrate, and migration of the antimicrobial substance into the food matrix, have largely been disregarded to the detriment of their translation into practical application. To address this gap, this review examines the mechanical properties of antimicrobial coatings (AMC) applied to FCS and their interplay with their antimicrobial properties within the framework of relevant regulatory constraints that would apply if these were used in real-world applications. This review also explores the various assessment techniques for examining these properties, the effects of the deposition methods on coating properties, and the potential applications of such coatings for FCS. Overall, this review attempts to provide a holistic perspective. Evaluation of the current literature urges a compromise between antimicrobial effectiveness and mechanical stability in order to adhere to various regulatory frameworks as the next step toward improving the industrial feasibility of AMC for FCS applications.