Electrochemical Oxidation of Glycine with Bimetallic Nickel−Manganese Oxide Catalysts

PEG mediated NiMn2O4 nanomaterials as a nano catalyst for peroxidase mimetic activity and photocatalytic degradation

Artificial peroxidases have garnered a lot of attention owing to their tremendous superiority over their natural counterparts. Here, NiMn2O4 nanoparticles have been successfully prepared through PEG assisted hydrothermal method. The varied PEG concentrations significantly altered the morphology and particle size of the synthesizedmaterials. We demonstrate the improved peroxide-like assay of different NiMn2O4 nanoparticles for the first time. Among them, Ni4 nanoparticles exhibit good peroxidase-like activity by generating the oxidation of chromogenic substrate 3, 3', 5, 5'-tetramethylbenzidine (TMB) in the presence of H2O2 and a blue color charge transfer product with an absorption maximum is positioned at 652 nm. These observations led to the development of a method for assessingH2O2 that can be read visually and photometrically. The Ni4 nanoparticles show enhanced kinetics compared to the natural enzyme horse radish peroxidase (HRP) with a lower Km (0.168 mM) value. Additionally, this Ni4 nanosphere applies as a visible light photocatalyst for the degradation of methylene blue (MB) and rhodamine B (Rh B) dyes under visible-light irradiation. Under optimized conditions, the degradationrates of MB and Rh B are 68 and 80.7 %, respectively, after 210 min, and recyclable efficiency is about 99 % for Rh B photocatalytic degradation in the first test and 98 % for five cycles, and about 98 % for MB photocatalytic degradation in the first test and 97 % for five cycles.

Glycine amino acid transformation under impacts by small solar system bodies, simulated via high-pressure torsion method

Impacts by small solar system bodies (meteoroids, asteroids, comets and transitional objects) are characterized by a combination of energy dynamics and chemical modification on both terrestrial and small solar system bodies. In this context, the discovery of glycine amino acid in meteorites and comets has led to a hypothesis that impacts by astronomical bodies could contribute to delivery and polymerization of amino acids in the early Earth to generate proteins as essential molecules for life. Besides the possibility of abiotic polymerization of glycine, its decomposition by impacts could generate reactive groups to form other essential organic biomolecules. In this study, the high-pressure torsion (HPT) method, as a new platform for simulation of impacts by small solar system bodies, was applied to glycine. In comparison with high-pressure shock experiments, the HPT method simultaneously introduces high pressure and deformation strain. It was found that glycine was not polymerized in the experimental condition assayed, but partially decomposed to ethanol under pressures of 1 and 6 GPa and shear strains of < 120 m/m. The detection of ethanol implies the inherent availability of remaining nitrogen-containing groups, which can incorporate to the formation of other organic molecules at the impact site. In addition, this finding highlights a possibility of the origin of ethanol previously detected in comets.

Metal-Organic Polymer-Derived Interconnected Fe-Ni Alloy by Carbon Nanotubes as an Advanced Design of Urea Oxidation Catalysts

The electrochemical urea oxidation reaction (UOR) is considered as a promising renewable source for harvesting energy from waste. We report a new synthetic design approach to produce an iron-nickel alloy nanocatalyst from a metal-organic polymer (MOP) by a single-step carbonization process at 500 °C, thus forming a core-shell of iron-nickel-coated carbon (C@FeNi) nanostructures wired by embedded carbon nanotubes (CNTs) (CNT/C@FeNi). Powder X-ray diffraction confirmed the formation of metallic FeNi₃ alloy nanoparticles (∼20 to 28 nm). Our experimental results showed that MOP containing CNTs acquired an interconnected hierarchical topology, which prevented the collapse of its microstructure during pyrolysis. Hence, CNT/C@FeNi shows higher porosity (10 times) than C@FeNi. The electrochemical UOR in alkaline electrolytes on these catalysts was studied using cyclic voltammetry (CV). The result showed a higher anodic current (3.5 mA cm^-2) for CNT/C@FeNi than for C@FeNi (1.1 mA cm^-2) at 1.5 V/RHE. CNT/C@FeNi displayed good stability in chronoamperometry experiments and a lower Tafel slope (33 mV dec^-1) than C@FeNi (41.1 mV dec^-1). In this study, CNT/C@FeNi exhibits higher exchange current density (3.2 μA cm^-2) than does C@FeNi (2 μA cm^-2). The reaction rate orders of CNT/C@FeNi and C@FeNi at a kinetically controlled potential of 1.4 V/RHE were 0.5 and 0.9, respectively, higher than the 0.26 of β-Ni(OH)₂, Ni/Ni(OH)₂ electrodes. The electrochemical impedance result showed a lower charge-transfer resistance for CNT/C@FeNi (61 Ω·cm^-2) than for C@FeNi (162 Ω·cm^-2), due to faster oxidation kinetics associated with the CNT linkage. Moreover, CNT/C@FeNi exhibited a lower Tafel slope and resistance and higher heterogeneity (25.2 × 10^-5 cm s^-1), as well as relatively high faradic efficiency (68.4%) compared to C@FeNi (56%). Thus, the carbon-coated FeNi₃ core connected by CNT facilitates lower charge-transfer resistance and reduces the UOR overpotential.

Potential Cycling Effects on Activities of Nickel-Mediated Benzyl Alcohol and Glycine Electrooxidation in Alkaline Solutions

Nickel electrodes under continuous potential cycling were applied for the electrooxidation of benzyl alcohol and glycine in KOH solutions, and their activities were measured and compared by cyclic voltammetry. It is shown that intrinsic activities of both reactions decrease with the increasing catalyst loadings, and a more significant decreasing trend was observed in glycine electrooxidation when compared to benzyl alcohol electrooxidation. These phenomena may be explained by an increasing of mass loading induced a decrease of the catalyst surface conductivity, structure changes of Ni(OH)2 from α-phase to β-phase, and the intercalation of glycine molecules into nickel hydroxide interlayers.