Investigation and development of photocathodes using polyaniline Encapsulated Ti3C2Tx MXene nanosheets for dye-sensitized solar cells

In the current study, polyaniline (PANI) modified two-dimensional Ti3C2Tx MXene composites (PANI-Ti3C2Tx) are exploited as photocathodes in dye-sensitized solar cells (DSSCs). The study revealed that incorporating PANI into Ti3C2Tx improved the material's electrochemical properties, owing to the presence of amino groups in PANI that enhanced the material's electrical conductivity and thereby facilitated more rapid ion transport. In addition, PANI enhanced the surface wettability of Ti3C2Tx, resulting in an increase in the number of electroactive sites. The presence of PANI molecules in the interlayer and on the surface of Ti3C2Tx was confirmed through X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), and X-ray photoelectron spectroscopy (XPS). Subsequently, electrochemical analysis of the PANI-Ti3C2Tx photocathode or counter electrode (CE) revealed a commendable electrocatalytic activity with the iodide/triiodide electrolyte, a favourable charge transfer kinetics, and a charge transfer resistance as low as platinum. Additionally, at AM 1.5G, the performance of the DSSC constructed using the thermally decomposed Pt-CE was 8.3% when subjected to simulated 1 sun light, whereas the efficiency of the DSSC constructed using the as-prepared composite material was 6.9% under corresponding conditions. PANI-Ti3C2Tx as the photocathode (CE) in a DSSC showed a higher power conversion efficiency (PCE) improvement than PANI CE and Ti3C2Tx CE DSSCs, emphasizing its potent catalytic activity and quick mass transport of electron capability. By capitalizing on the conductivity and electrocatalytic property of the two components, the as-fabricated PANI-Ti3C2Tx photocathode significantly increased the overall PCE of DSSCs. Furthermore, the DSSC utilizing the PANI-Ti3C2Tx CE demonstrated exceptional reproducibility and stability. This underscores its consistently high performance and significant resistance to corrosion in the iodide/triiodide redox electrolyte environment. Overall, these findings show that the PANI-Ti3C2Tx composite has the potential to be a competitive alternative to platinum-based CE materials for the development of DSSCs with exceptional performance.

MXene-modified electrodes and electrolytes in dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) have attracted much attention as promising tools in renewable energy conversion technology. This is mainly because of their beneficial qualities, such as their impressive efficiency levels and low-cost fabrication techniques. An overview of MXene-modified electrodes in DSSCs is given in this review article. MXenes are two-dimensional (2D) transition metal carbides or nitrides with remarkable properties such as high conductivity and large surface area. MXenes' properties make them an appealing material for various applications, including energy storage, catalysis, and electronic devices. MXene integration enhances ion transport, dye adsorption, and charge transport in DSSC electrodes. In-depth analysis of the use of 2D Mxene and integration with carbon nanotubes (CNTs), reduced graphene oxide (rGO), 2D MoS2, and hybrids like 2D-2D heterostructures for electrode modification in photovoltaics (PVs), including anodes, photoanodes, composite decorated electrodes, counter electrodes (CEs), and electrolytes, is provided in this review article. The effects on the performance metrics of various deposition techniques are discussed and assessed. The use of MXene-modified electrodes in DSSCs suggests potential for enhancing the performance and efficiency of these solar cells in general. The article examines this strategy's potential advantages and implications, illuminating the fascinating advancements in the area and emphasizing MXenes' potential as a valuable substance for renewable energy applications. We also discuss the difficulties and potential benefits of using MXene-modified electrodes in DSSCs and emphasize the need for additional study to enhance stability, optimize MXene integration techniques, and enhance long-term device performance. The scalability and potential of MXene-based electrode modifications for commercial applications are also covered, addressing issues and prospects for the future, focusing on the necessity of more study. Electrodes modified with MXenes can improve DSSC performance and advance sustainable energy conversion.

Solution-processed two-dimensional materials for next-generation photovoltaics

In the ever-increasing energy demand scenario, the development of novel photovoltaic (PV) technologies is considered to be one of the key solutions to fulfil the energy request. In this context, graphene and related two-dimensional (2D) materials (GRMs), including nonlayered 2D materials and 2D perovskites, as well as their hybrid systems, are emerging as promising candidates to drive innovation in PV technologies. The mechanical, thermal, and optoelectronic properties of GRMs can be exploited in different active components of solar cells to design next-generation devices. These components include front (transparent) and back conductive electrodes, charge transporting layers, and interconnecting/recombination layers, as well as photoactive layers. The production and processing of GRMs in the liquid phase, coupled with the ability to "on-demand" tune their optoelectronic properties exploiting wet-chemical functionalization, enable their effective integration in advanced PV devices through scalable, reliable, and inexpensive printing/coating processes. Herein, we review the progresses in the use of solution-processed 2D materials in organic solar cells, dye-sensitized solar cells, perovskite solar cells, quantum dot solar cells, and organic-inorganic hybrid solar cells, as well as in tandem systems. We first provide a brief introduction on the properties of 2D materials and their production methods by solution-processing routes. Then, we discuss the functionality of 2D materials for electrodes, photoactive layer components/additives, charge transporting layers, and interconnecting layers through figures of merit, which allow the performance of solar cells to be determined and compared with the state-of-the-art values. We finally outline the roadmap for the further exploitation of solution-processed 2D materials to boost the performance of PV devices.

Investigation and Optimization of Mxene Functionalized Mesoporous Titania Films as Efficient Photoelectrodes

Three-dimensional mesoporous TiO2 scaffolds of anatase phase possess inherent eximious optical behavior that is beneficial for photoelectrodes used for solar energy conversion applications. In this regard; substantial efforts have been devoted to maximizing the UV and/or visible light absorption efficiency; and suppressing the annihilation of photogenerated charged species; in pristine mesoporous TiO2 structures for improved solar illumination conversion efficiency. This study provides fundamental insights into the use of Mxene functionalized mesoporous TiO2 as a photoelectrode. This novel combination of Mxene functionalized TiO2 electrodes with and without TiCl4 treatment was successfully optimized to intensify the process of photon absorption; charge segregation and photocurrent; resulting in superior photoelectrode performance. The photocurrent measurements of the prepared photoelectrodes were significantly enhanced with increased contents of Mxene due to improved absorption efficiency within the visible region; as verified by UV-Vis absorption spectroscopy. The anatase phase of TiO2 was significantly augmented due to increased contents of Mxene and postdeposition heat treatments; as evidenced by structural analysis. Consequently; an appreciable coverage of well-developed grains on the FTO surface was observed in SEM images. As such; these newly fabricated conductive mesoporous TiO2 photoelectrodes are potential candidates for photoinduced energy conversion and storage applications.

Laser Processing Optimization for Large-Area Perovskite Solar Modules

The industrial exploitation of perovskite solar cell technology is still hampered by the lack of repeatable and high-throughput fabrication processes for large-area modules. The joint efforts of the scientific community allowed to demonstrate high-performing small area solar cells; however, retaining such results over large area modules is not trivial. Indeed, the development of deposition methods over large substrates is required together with additional laser processes for the realization of the monolithically integrated cells and their interconnections. In this work, we develop an efficient perovskite solar module based on 2D material engineered structure by optimizing the laser ablation steps (namely P1, P2, P3) required for shaping the module layout in series connected sub-cells. We investigate the impact of the P2 and P3 laser processes, carried out by employing a UV pulsed laser (pulse width = 10 ns; λ = 355 nm), over the final module performance. In particular, a P2 process for removing 2D material-based cell stack from interconnection area among adjacent cells is optimized. Moreover, the impact of the P3 process used to isolate adjacent sub-cells after gold realization over the module performance once laminated in panel configuration is elucidated. The developed fabrication process ensures high-performance repeatability over a large module number by demonstrating the use of laser processing in industrial production.