First detection of a selenenyl fluoride ArSe-F by NMR spectroscopy: the nature of Ar2Se2/XeF2 and ArSe-SiMe3/XeF2 reagents

Organoselenium-Catalyzed Enantioselective Synthesis of 2-Oxazolidinones from Alkenes

An operationally simple method for generating enantioenriched 2-oxazolidinones from N-Boc amines and mono- or trans-disubstituted alkenes via chiral organoselenium catalysis is described. Critical to the success of the transformation was the inclusion of triisopropylsilyl chloride (TIPSCl), likely because it sequestered fluoride generated by the oxidant (N-fluorocollidinium tetrafluoroborate) throughout the reaction and suppressed side reactivity. The scope of both the amine and alkene substrates was explored, generating a variety of 2-oxazolidinones in modest to high yields with high enantioselectivities.

Selective Synthesis of Monofluorinated Compounds Applying Amine/HF Reagents

For nucleophilic monofluorination, amine/HF reagents such as Et3 N⋅3HF, Pyr⋅9HF (Olah's reagent) and similar combinations belong to the most frequently used fluoride sources, whereupon the selectivity of these reagents can be very different depending of its acidity, the nucleophilicity of the fluoride equivalent, and the structure of the particular substrate. These reagents can be used safely in ordinary chemistry laboratories for nucleophilic substitution reactions by fluoride at sp3 -hybridized carbon centers. For ring opening reactions of epoxides, the regio- and stereoselectivity is very much depending of the nature of the epoxide and the acidity of the HF reagent favoring either SN 1 or SN 2 type reactions. Similarly, the outcome of halofluorination and similar reactions with sulfur or seleno electrophiles can be controlled by the particular combination of the electrophile and the fluoride source. Examples for the application of these reaction types for the synthesis of fluorine-containing analogues of natural products or biologically relevant compounds are in the focus of this personal account.

Oxidative Fluorination of Selenium and Tellurium Compounds using a Thermally Stable Phosphonium SF5 - Salt Accessible from SF6

Fluorinated group 16 moieties are attractive building blocks in synthetic chemistry but only few synthetic methods are available to prepare them. Herein, we report a new oxidative fluorination reagent capable of stabilizing reactive fluorinated anions. It consists of an SF5 - anion and a chemically inert phosphonium cation and is exceptionally thermally stable. Accordingly, it was used to generate the SeF5 - and TeF5 - anions from the elemental chalcogens and to prepare the unknown tetrafluoro(phenyl)-λ5 -selenate PhSeF4 - and -tellurate PhTeF4 - from the corresponding diphenyl dichalcogenides. In addition, we show that further derivatization of [PhTeF4 ]- by oxidation to trans-PhTeF4 O- and subsequent alkylation gives access to a new class of trans-(alkoxy)(phenyl)tetrafluoro-λ6 -tellanes (trans-PhTeF4 OR), thus providing an approach to introduce the functional group into organic molecules.

Attempts to Synthesize a Thiirane, Selenirane, and Thiirene by Dealkylation of Chalcogeniranium and Thiirenium Salts

Thiiranium salts [Ad2 SR]+ X- (5, 8, 9, 11, 12; X- =Tf2 N- (Tf=CF3 SO2 ), SbCl6 - ) and seleniranium salts [Ad2 SeR]+ X- (14, 16, 17, 23-25; X- =Tf2 N- , BF4 - , CHB11 Cl11 - , SbCl6 - ) are synthesized from strained alkene bis(adamantylidene) (1). The disulfides and the diselenides (Me3 SiCH2 CH2 E)2 (4, 13), (tBuMe2 SiCH2 CH2 E)2 (7, 22), and (NCCH2 CH2 E)2 (10, 15; E=S, Se) have been used. The thiirenium salts [tBu2 C2 SR]+ X- (34) and [Ad2 C2 SR]+ X- (35, 36) are prepared from the bis-tert-butylacetylene (2) and bis-adamantyl-acetylene (3) with R=Me3 SiCH2 CH2 and tBuMe2 SiCH2 CH2 . Attempts to cleave off the groups Me3 SiCH2 CH2 , tBuMe2 SiCH2 CH2 , and NCCH2 CH2 resulted in thiiranes 27, 30. No selenirane Ad2 Se (33) is formed from seleniranium salts, instead cleavage to the alkene (1) and diselenide (13, 15) occurs. The thiirenium salt [Ad2 C2 SCH2 CH2 SiMe3 ]+ Tf2 N- (35) does not yield the thiirene Ad2 C2 S (37), the three-membered ring is cleaved, forming the alkyne (3) and disulfide (4). All compounds are characterized by ESI mass spectra, NMR spectra, and by quantum chemical calculations. Crystal structures of the salts 8, 12, 25, 17, 26, 36 and the thiiranes 27, 30 are presented.

Site-specific C–H chalcogenation of quinoxalin-2(1H)-ones enabled by Selectfluor reagent

A site-specific C6–H chalcogenation of quinoxalin-2(1H)-ones with various diselenides and dithiols is presented by employing Selectfluor reagent as an oxidant.

Can modified DNA base pairs with chalcogen bonding expand the genetic alphabet? A combined quantum chemical and molecular dynamics simulation study

A comprehensive (DFT and MD) computational study is presented with the goal to design and analyze model chalcogen-bonded modified nucleobase pairs that replace one (i.e., A_XY:T, G:C_XY, G_XY:C) or two (G_XY:C_X'Y', X/X' = S, Se and Y/Y' = F, Cl, Br) Watson-Crick (WC) hydrogen bonds of the canonical A:T or G:C pair with chalcogen bond(s). DFT calculations on 18 base pair combinations that replace one WC hydrogen bond with a chalcogen bond reveal that the bases favorably interact in the gas phase (binding strengths up to -140 kJ mol^-1) and water (up to -85 kJ mol^-1). Although the remaining hydrogen bond(s) exhibits similar characteristics to those in the canonical base pairs, the structural features of the (Y-XO) chalcogen bond(s) change significantly with the identity of X and Y. The 36 doubly-substituted (G_XY:C_X'Y') base pairs have structural deviations from canonical G:C similar to those of the singly-substituted modifications (G:C_XY or G_XY:C). Furthermore, despite the replacement of two strong hydrogen bonds with chalcogen bonds, some G_XY:C_X'Y' pairs possess comparable binding energies (up to -132 kJ mol^-1 in the gas phase and up to -92 kJ mol^-1 in water) to the most stable G:C_XY or G_XY:C pairs, as well as canonical G:C. More importantly, G:C-modified pairs containing X = Se (high polarizability) and Y = F (high electronegativity) are the most stable, with comparable or slightly larger (by up to 13 kJ mol^-1) binding energies than G:C. Further characterization of the chalcogen bonding in all modified base pairs (AIM, NBO and NCI analyses) reveals that the differences in the binding energies of modified base pairs are mainly dictated by the differences in the strengths of their chalcogen bonds. Finally, MD simulations on DNA oligonucleotides containing the most stable chalcogen-bonded base pair from each of the four classifications (A_XY:T, G:C_XY, G_XY:C and G_XY:C_X'Y') reveal that the singly-modified G:C pairs best retain the local helical structure and pairing stability to a greater extent than the modified A:T pair. Overall, our study identifies two (G:C_SeF and G_SeF:C) promising pairs that retain chalcogen bonding in DNA and should be synthesized and further explored in terms of their potential to expand the genetic alphabet.

Structure of a diorganotelluroxonium(IV) cation, {[2,6-(CH2NMe2)2C6H3Te(μ-O)]2}2+, with the tri-chlorido-(dimethyl sulfoxide)-platinum(II) anion

In the title salt, di-μ-oxido-bis-{2,6-bis-[(di-methyl-amino)-meth-yl]phenyl-κC 1}tellurium(-IV) bis[tri-chlorido-(dimethyl sulfoxide-κS)platinate(II)], (C24H38N4O2Te2)[PdCl3(C2H6OS)]2, which crystallizes in the triclinic space group P , each Te atom is in a distorted five-coordinated TeO2N2C square-pyramidal geometry (τ values of 0.026 and 0.001) with the C atoms of the phenyl rings occupying the apical positions. The phenyl rings in the [C24H38N4O2Te2]2+ cation are in a cis arrangement to enable this species to participate in Te⋯Cl cation-anion inter-actions. There are also C-H⋯O inter-actions involving the dimethyl sulfoxide ligands and numerous cation-anion and anion-anion C-H⋯Cl inter-actions, which link the ions into a complex three-dimensional array.

Structural characterization of the derivatives of bis{[2,6-(dimethylamino)methyl]phenyl} selenide with palladium(II) and mercury(II)

The intramolecularly coordinated homoleptic diorgano selenide bis{2,6-bis[(dimethylamino)methyl]phenyl} selenide, C₂₄H₃₈N₄Se or R₂Se, where R is 2,6-(Me₂NCH₂)₂C₆H₃, 14, was synthesized and its ligation reactions with Pd^II and Hg^II precursors were explored. The reaction of 14 with SO₂Cl₂ and K₂PdCl₄ resulted in the formation of the meta C-H-activated dipalladated complex {μ-2,2'-bis[(dimethylamino)methyl]-4,4'-bis[(dimethylazaniumyl)methyl]-3,3'-selanediyldiphenyl-κ⁴C¹,N²:C^1',N^2'}bis[dichloridopalladium(II)], [Pd₂Cl₄(C₂₄H₃₈N₄Se)] or [{R(H)PdCl₂}₂Se], 15. On the other hand, when ligand 14 was reacted with HgCl₂, the reaction afforded a dimercurated selenolate complex, {μ-bis{2,6-bis[(dimethylamino)methyl]benzeneselanolato-κ⁴N²,Se:Se,N⁶}-μ-chlorido-bis[chloridomercury(II)], [Hg₂(C₁₂H₁₉N₂Se)Cl₃] or RSeHg₂Cl₃, 16, where two Hg^II ions are bridged by selenolate and chloride ligands. In palladium complex 15, there are two molecules located on crystallographic twofold axes and within each molecule the Pd moieties are related by symmetry, but there are still two independent Pd centers. Mercury complex 16 results from the cleavage of one of the Se-C bonds to form a bifurcated SeHg₂ moiety with the formal charge on the Se atom being -1. In addition, one of the Cl ligands bridges the two Hg atoms and there are two terminal Hg-Cl bonds. Each Hg atom is in a distorted environment which can be best described as a T-shaped base with the bridging Cl atom in an apical position, with several angles close to 90° and with one angle much larger and closer to 180°.

Synthesis of 3-selanylbenzo[b]furans promoted by SelectFluor®

A simple and practical protocol for the synthesis of 3-selanyl-benzo[b]furans mediated by the SelectFluor® reagent was developed. This novel methodology provided a greener alternative to generate 3-substituted-benzo[b]furans via a metal-free procedure under mild conditions. The intramolecular cyclization reaction was carried out employing an electrophilic selenium species generated in situ through the reaction between SelectFluor® and organic diselenides. The formation of this electrophilic selenium species (RSe-F) was confirmed by heteronuclear NMR spectroscopy, and its reactivity was explored.

Recent Advances in Electrochemical Systems for Selective Fluorination of Organic Compounds

Organofluorine compounds are key materials applied in daily life because of their versatile utility as functional materials, pharmaceuticals, and agrochemicals. Development of the selective fluorination of organic molecules under safe conditions is therefore one of the most important subjects in modern synthetic organofluorine chemistry. Thus, various electrophilic fluorination reagents such as XeF₂, (PhSO₂)₂NF (NFSI), Et₂NSF₃ (DAST), (MeOCH₂CH₂)₂NSF₃ (Deoxofluor), 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo-[2.2.2]octane bis(tetrafluoroborate) (Selectfluor), N-fluoropyridinium salts, and 4-tert-butyl-2,6-dimethylphenylsulfur trifluoride (Fluolead) have been developed for chemical fluorination to date and the development of new fluorinating reagents is still ongoing. Electrochemical synthesis has recently attracted much attention from the perspective of green sustainable chemistry because no hazardous reagents are required and scale-up is generally easy. Although electrochemical perfluorination of organic compounds using a nickel anode in anhydrous HF has been well-established to manufacture perfluoro-functional materials, electrochemical partial fluorination (selective electrochemical fluorination) has been underdeveloped due to the low nucleophilicity of fluoride ions and anode passivation, which interferes with electrolysis. Selective electrochemical fluorination can be commonly achieved in aprotic solvents containing fluoride ions to provide mostly mono- and difluorinated products. Electrolysis is conducted at constant potentials slightly higher than the first oxidation potential of a substrate. Constant current electrolysis is also effective for selective fluorination in many cases. Choice of the combination of a supporting fluoride salt and an electrolytic solvent is most important to accomplish efficient selective fluorination. In this Account, we focus on our recent work on the electrochemical mono- and difluorination of various organic compounds and their synthetic application. We first briefly explain our research background of electrochemical fluorination. Main factors such as the effects of fluoride salts as supporting electrolytes, electrolytic solvents, and anode materials on the selectivity and efficiency of fluorination are discussed. Next, effects of PEG oligomer additives enhancing the nucleophilicity of fluoride ions and organic solvent-free systems using poly(HF) salt ionic liquids as well as recyclable mediatory systems for electrochemical fluorination are described. The desulfurizative monofluorination of xanthate and gem-difluorination of benzothioate and dithioacetals are briefly mentioned. Regioselective anodic fluorination of various heterocyclic compounds having a phenylthio group as electroauxiliary and heterocycles containing sulfur and other heteroatoms are also described. In addition, a boryl group is shown to be a good leaving group for anodic fluorination. Moreover, electrochemically α,α-difluorinated phenylsulfides and phenylselenides are illustrated to be useful for photochemical C-H difluoromethylation of aromatic and heteroaromatic compounds. Finally, this Account also highlights highly diastereoselective fluorination of aliphatic heterocyclic and open-chain compounds, as well as new electrolytic fluorination methods using inorganic fluoride salts such as KF and CsF.

A general method for site-selective Csp3-S bond formation via cooperative catalysis

Herein, we report a copper-catalysed site-selective thiolation of Csp³-H bonds of aliphatic amines. The method features a broad substrate scope and good functional group compatibility. Primary, secondary, and tertiary C-H bonds can be converted into C-S bonds with a high efficiency. The late-stage modification of biologically active compounds by this method was also demonstrated. Furthermore, the one-pot preparation of pyrrolidine or piperidine compounds via a domino process was achieved.

Catalytic, Enantioselective syn-Diamination of Alkenes

The enantioselective, vicinal diamination of alkenes represents one of the stereocontrolled additions that remains an outstanding challenge in organic synthesis. A general solution to this problem would enable the efficient and selective preparation of widely useful, enantioenriched diamines for applications in medicinal chemistry and catalysis. In this article, we describe the first enantioselective, syn-diamination of simple alkenes mediated by a chiral, enantioenriched organoselenium catalyst together with a N,N'-bistosyl urea as the bifunctional nucleophile and N-fluorocollidinium tetrafluoroborate as the stoichiometric oxidant. Diaryl, aryl-alkyl, and alkyl-alkyl olefins bearing a variety of substituents are all diaminated in consistently high enantioselectivities but variable yields. The reaction likely proceeds through a Se(II)/Se(IV) redox catalytic cycle reminiscent of the syn-dichlorination reported previously. Furthermore, the syn-stereospecificity of the transformation shows promise for highly enantioselective diaminations of alkenes with no strong steric or electronic bias.

Diselenides and Benzisoselenazolones as Antiproliferative Agents and Glutathione-S-Transferase Inhibitors

A series of variously functionalized selenium-containing compounds were purposely synthesized and evaluated against a panel of cancer cell lines. Most of the compounds showed an interesting cytotoxicity profile with compound 5 showing a potent activity on MCF7 cells. The ethyl amino derivative 5 acts synergistically with cis-platin and inhibits the GST enzyme with a potency that well correlates with the cytotoxicity observed in MCF7 cells. A computational analysis suggests a possible binding mode on the GST enzyme. As the main outcome of the present study, the ethyl amino derivative 5 emerged as a valid lead compound for further, future developments.

Reactivity of bis[{2,6-(dimethylamino)methyl}phenyl]telluride with Pd(ii) and Hg(ii): isolation of the first Pd(ii) complex of an organotellurenium cation as a ligand

The first complex of an organotellurenium cation as a ligand with Pd(ii) is reported.

Selenium– and tellurium–halogen reagents

Selenium and tellurium form binary halides in which the chalcogen can be in formal oxidation states (IV), (II) or (I). They are versatile reagents for the preparation of a wide range of inorganic and organic selenium and tellurium compounds taking advantage of the reactivity of the chalcogen–halogen bond. With the exception of the tetrafluorides, the tetrahalides are either commercially available or readily prepared. On the other hand, the low-valent species, EX2 (E = Se, Te; X = Cl, Br) and E2X2 (E = Se, Te; X = Cl, Br) are unstable with respect to disproportionation and must be used as in situ reagents. Organoselenium and tellurium halides are well-known in oxidation states (IV) and (II), as exemplified by REX3, R2EX2 and REX (R = alkyl, aryl; E = Se, Te; X = F, Cl, Br, I); mixed-valent (IV/II) compounds of the type RTeX2TeR are also known. This chapter surveys the availability and/or preparative methods for these widely used reagents followed by examples of their applications in synthetic inorganic and organic selenium and tellurium chemistry. For both the binary halides and their organic derivatives, the discussion is subdivided according to the formal oxidation state of the chalcogen.

Synthesis and structure of an aryl-selenenium(II) cation, [C34H41N4Se+]2[Hg(SeCN)4]2-, based on a 5-tert-butyl-1,3-bis-(1-pentyl-1H-benzimidazol-2-yl)benzene scaffold

In the title salt, bis-{[5-tert-butyl-1,3-bis-(1-pentyl-1H-benzimidazol-2-yl)benzene]selenium} tetra-kis-(seleno-cyanato)-mercury, (C34H41N4Se)2[Hg(SeCN)4], the aryl-selenenium cations, [C34H41N4Se]+, are linked through [Hg(SeCN)4]2- anions by C-H⋯N hydrogen bonds. In the cation, the geometry around the Se atom in the 5-tert-butyl-1,3-bis-(1-pentyl-1H-benzimidazol-2-yl)benzene scaffold is T-shaped, resulting from the coordination of Se by the C atom of the central aromatic ring and the N atoms of both of the benzimidazole moieties. The trans Se-N bond lengths are almost equal [2.087 (3) and 2.099 (3) Å] and the Se-C bond length is 1.886 (3) Å. The N-Se-N angle is 159.29 (11)°. The geometry around the HgII atom in the [Hg(SeCN)4]2- anion is distorted tetra-hedral, with Se-Hg-Se angles ranging from 88.78 (3) to 126.64 (2)°. In [Hg(SeCN)4]2-, the Hg-Se bonds are unsymmetrical [2.5972 (4) and 2.7242 (5) Å]. One of the pentyl substituents is disordered over two equivalent conformations, with occupancies of 0.852 (8) and 0.148 (8).

Synthesis and structure of arylselenium(ii) and aryltellurium(ii) cations based on rigid 5-tert-butyl-1,3-bis-(N-pentylbenzimidazol-2′-yl)benzenes

The transmetalation reactions of mercury precursor, [^Pentyl(N^C^N)HgCl] (19) with selenium and tellurium halides led to isolation of air stable NCN pincer based arylselenium(ii) and aryltellurium(ii) cations due to facile ionization of Se/Te halogen bond.

2,6-[Bis(dimethylamino)methyl]phenylselenenyl chloride/bromide monohydrate

In the title hydrated salt, C12H19N2Se+·Cl0.44/Br0.56−·H2O, the halide ions (both with site symmetry 2) have different Cl−/Br−occupancies of 0.399 (2)/0.601 (2) and 0.491 (2)/0.509 (2). In the crystal, the cation and anion are linked by an Se...X(X= Cl/Br) interaction of length 3.5593 (8) Å. The water molecule and anions are linked by O—H...Xhydrogen bonds into a staggered chain propagating in theb-axis direction and the packing is consolidated by weak C—H...Xinteractions.

Organoselenium-Catalyzed Synthesis of Oxygen- and Nitrogen-Containing Heterocycles

A new and efficient approach for the synthesis of oxygen and nitrogen heterocycles by organoselenium catalysis has been developed. The exo-cyclization proceeded smoothly under mild conditions with good functional group tolerance and excellent regioselectivity. Mechanistic studies revealed that 1-fluoropyridinium triflate is key for oxidative cyclization.

Relativistic effects in the one-bond spin-spin coupling constants involving selenium

One-bond spin-spin coupling constants involving selenium of seven different types, (1)  J(Se,X), X = (1) H, (13) C, (15)  N, (19)  F, (29) Si, (31) P, and (77) Se, were calculated in the series of 14 representative compounds at the SOPPA(CCSD) level taking into account relativistic corrections evaluated both at the RPA and DFT levels of theory in comparison with experiment. Relativistic corrections were found to play a major role in the calculation of (1)  J(Se,X) reaching as much as almost 170% of the total value of (1)  J(Se,Se) and up to 60-70% for the rest of (1)  J(Se,X). Scalar relativistic effects (Darwin and mass-velocity corrections) by far dominate over spin-orbit coupling in the total relativistic effects for all (1)  J(Se,X). Taking into account relativistic corrections at both random phase approximation and density functional theory levels essentially improves the agreement of theoretical results with experiment. The most 'relativistic' (1)  J(Se,Se) demonstrates a marked Karplus-type dihedral angle dependence with respect to the mutual orientation of the selenium lone pairs providing a powerful tool for stereochemical analysis of selenoorganic compounds.

The reactions of para-halo diaryl diselenides with halogens. A structural investigation of the CT compound (p-FC6H4)2Se2I2, and the first reported “RSeI3” compound, (p-ClC6H4)SeI·I2, which contains a covalent Se-I bond

The reactions of the diaryl-diselenides (p-FC(6)H(4))(2)Se(2) and (p-ClC(6)H(4))(2)Se(2) with diiodine have been investigated. Species of stoichiometry "RSeI" are formed when the ratio employed is 1:1. The solid-state structure of "(p-FC(6)H(4))SeI" has been determined, and shown to be a charge-transfer (CT) adduct, (p-FC(6)H(4))(2)Se(2)I(2), where the Se-Se bond is retained and the diiodine molecule interacts with only one of the selenium atoms. The Se-I bond in (p-FC(6)H(4))(2)Se(2)I(2) is 2.9835(12) Å, which is typical for a (10-I-2) Se-I-I CT system. When diiodine is reacted in a 3:1 ratio with (p-XC(6)H(4))(2)Se(2) (X = F, Cl) species of stoichiometry "RSeI(3)" are formed. The structure of "(p-ClC(6)H(4))SeI(3)" reveals that this is not a selenium(IV) compound, but is better represented as a selenium(II) CT adduct, (p-ClC(6)H(4))SeI·I(2). The Se-I bond to the diiodine molecule is typical in magnitude for a CT adduct, Se-I: 2.8672(5) Å, whereas the other Se-I bond is much shorter, Se-I: 2.5590(6) Å, and is a genuine example of a rarely observed covalent Se-I bond, which appears to be stabilised by a weak Se···I interaction from a neighbouring iodine atom. The reaction of (p-ClC(6)H(4))SeI with Ph(3)P results in the formation of a CT adduct, Ph(3)PSe(p-ClC(6)H(4))I, which has a T-shaped geometry at selenium (10-Se-3). By contrast, the reaction of (p-FC(6)H(4))SeI with Ph(3)P does not form an adduct, but results in the formation of Ph(3)PI(2) and (p-FC(6)H(4))(2)Se(2).

Structural isomerism in (p-XC6H4)SeCl3 and (p-XC6H4)SeBr3 (X = F, Cl) compounds. Co-crystallisation of cis- and trans-dimeric forms of (p-ClC6H4)SeCl2(μ-Cl)2(p-ClC6H4)SeCl2. A new structural modification for the "PhSeBr" reagent, Ph2Se2Br2, containing an elongated Se-Se bond

A series of di(para-halophenyl)diselenides, (p-XC(6)H(4))(2)Se(2) (X = F, Cl) have been reacted with three equivalents of SO(2)Cl(2) or Br(2), leading to the formation of selenium(iv) RSeX(3) compounds. The structures of (p-FC(6)H(4))SeX(3) (X = Cl, Br) have been determined, and both exhibit a dimeric RSeX(2)(μ-X)(2)RSeX(2) structure consisting of two "saw-horse" (p-FC(6)H(4))SeX(3) units linked by two halide bridges, with an overall square pyramidal geometry at selenium. In both structures all the selenium and halogen atoms are planar, with both aryl rings located on the same side of the Se(2)X(6) plane (cis-isomer). The structure of (p-ClC(6)H(4))SeCl(3) also adopts a planar dimeric structure, however both cis- and trans-dimeric molecules are co-crystallised in the unit cell. In contrast, the structure of (p-ClC(6)H(4))SeBr(3) adopts a folded cis-dimeric structure due to steric constraints. Secondary Se···X interactions to the "vacant" sixth coordination site at selenium are a feature of most of these structures, but are most prominent in the folded structure of (p-ClC(6)H(4))SeBr(3). A re-examination of the PhSeBr/PhSeBr(3) system resulted in the isolation of crystals of a second structural form of "PhSeBr". The structure of Ph(2)Se(2)Br(2) consists of two PhSeBr units linked by an elongated Se-Se bond of 2.832(4) Å, and longer secondary Se···Br interactions of 3.333(4) Å to form a chain structure. Further weak Se···Br and Br···Br interactions are present, which form loosely linked rippled sheets of selenium and bromine atoms, similar to the sheets observed for the tetrameric form, Ph(4)Se(4)Br(4).