Photosensitized oxidation of sulfides: discriminating between the singlet-oxygen mechanism and electron transfer involving superoxide anion or molecular oxygen

Water-soluble platinum and palladium porphyrins with peripheral ethyl phosphonic acid substituents: synthesis, aggregation in solution, and photocatalytic properties

Water-soluble porphyrins have garnered significant attention due to their broad range of applications in biomedicine, catalysis, and material chemistry. In this work, water-soluble platinum(II) and palladium(II) complexes with porphyrins bearing ethyl phosphonate substituents, namely, Pt/Pd 10-(ethoxyhydroxyphosphoryl)-5,15-di(p-carboxyphenyl)porphyrins (M3m, M = Pt(II), Pd(II)) and Pt/Pd 5,10-bis(ethoxyhydroxyphosphoryl)-10,20-diarylporphyrins (M1d-M3d; aryl = p-tolyl (1), mesityl (2), p-carboxyphenyl (3)), were synthesized by alkaline hydrolysis of the corresponding diethyl phosphonates M6m and M4d-M6d. NMR, UV-vis, and fluorescence spectroscopy revealed that the mono-phosphonates M3m tend to form aggregates in aqueous media, while the bis-phosphonates M3d exist predominantly as monomeric species across a wide range of concentrations (10-6-10-3 M), ionic strengths (0-0.81 M), and pH values (4-12). Single-crystal X-ray diffraction studies of the diethyl phosphonates Pt6d and Pd6d revealed that π-π stacking of the aromatic macrocycles is sterically hindered in the crystals, providing a rationale for the low degree of solution aggregation observed for ethyl phosphonate M3d. Photophysical studies of M3m and M1d-M3d demonstrated that these compounds are phosphorescent and generate singlet oxygen in aqueous solutions. Pd(II) complex Pd3d is an excellent photocatalyst for the oxidation of sulfides using di-oxygen in a solvent mixture (MeCN/H2O, 4 : 1 v/v). Under these conditions, various alkyl and aryl sulfides were quantitatively converted into the desired sulfoxides. For the oxygenation of mixed alkyl-aryl sulfides, Pd3d outperforms Pd(II) meso-tetrakis(p-carboxyphenyl)porphyrin (PdTCPP). This photocatalyst can be recycled and reused to afford sulfoxides with no loss of product yield.

Generation of Triplet States by Host-Stabilized Through-Space Conjugation for the Construction of Efficient Supramolecular Photocatalysts

Promoting the generation of triplet states is essential for developing efficient photocatalytic systems. This research presents a novel approach of host-stabilized through-space conjugation via the combination of covalent and non-covalent methods. The designed building block, 4,4'-(1,4(1,4)-dibenzene cyclohexaphane-1,4-diyl)bis(1-phenylpyridinium) chloride, features inherently stable through-space conjugation. When this block forms a 1 : 1 host-guest complex with cucurbit[8]uril, the through-space conjugation is further stabilized within the confined cavity. Both the generation and lifetime of triplet state are significantly increased, resulting from the host-stabilized through-space conjugation. Additionally, the ultrahigh binding constant of 6.58×1014 M-1 ensures the persistence of host-stabilization effect. As a result, the host-guest complex acts as a highly efficient catalyst in the photocatalytic oxidation of thioether and aromatic alcohol. In the photodegradation of lignin, a complex natural product, the host-guest complex also exhibits high efficiency, demonstrating its robustness. This line of research is anticipated to enrich the toolbox of supramolecular photochemistry and provide a strategy for fabricating efficient supramolecular photocatalysts.

Unveiling Ru(bpy)3 2+-Encapsulated Zeolite Y as Photocatalyst: Harnessing Photocatalytic Singlet Oxygen Generation for Mustard Gas Simulant Detoxification

This study explores the encapsulation of Ru(bpy)3 2+ within Zeolite Y (ZY) to improve photocatalytic singlet oxygen generation for the degradation of a mustard gas simulant, namely 2-chloroethyl ethyl sulfide (CEES). Mustard gas simulants are known to disrupt several biological processes; thus, their effective degradation is essential. Zeolite Y, with its hierarchical structure and adjustable Si/Al ratios, is an ideal host for Ru(bpy)3 2+, significantly improving its photocatalytic efficiency and stability. It is demonstrated through XRD and spectroscopic analyses that encapsulated Ru(bpy)3 2+ maintains its structural and photophysical properties, which are essential for generating singlet oxygen. Ru(bpy)3(1.0) loaded ZY(15) (where 1.0 and 15 represent the encapsulated amount of Ru(bpy)3 2+ and Si/Al ratio, respectively) outperforms other investigated photocatalytic systems in the oxidation of CEES, demonstrating high conversion rates and selectivity toward nontoxic sulfoxide products. Immobilization of Ru(bpy)3 2+-encapsulated zeolite Y onto cotton fabric results in effective degradation of CEES. The experimental results, validated by theoretical calculations, indicate an improved oxygen affinity and accessibility in zeolites with higher Si/Al ratios. This study advances the design of photocatalytic materials for environmental and defense applications, providing sustainable solutions for hazardous chemical degradation.

Harnessing Solar Power for Oxidation of Organic Compounds by Re(I)Dipyrrinato Complexes

Metal dipyrrinato complexes of 4d and 5d metals have distinctive features such as high absorption coefficients in the visible section and room temperature phosphorescence in the red region. This work demonstrates the light-assisted oxidation of organic compounds employing rhenium(I)dipyrrinato complexes as catalysts. The heavy atom effect in rhenium(I)dipyrrinato complexes leads to the formation of long-lived triplet excited states, and these complexes can generate singlet oxygen in excellent yields (up to 84 %). A method was developed for photocatalytic aerobic oxidation of sulfides and amines using only 0.05 mol % and 0.025 mol % of the rhenium(I)dipyrrinato complexes, respectively. The method is efficient, and within 2 h, a variety of substrates were oxidized to produce sulfoxides and imines in high yields (up to 97 %). Rhenium(I)dipyrrinato complexes work very well both in visible light and sunlight, making them promising candidates for photocatalytic applications.

Single walled carbon nanotubes covalently functionalized by a ruthenium complex for photocatalytic oxidations

The covalent bonding of a ruthenium bipyridine complex derivative with the aromatic network of single walled carbon nanotubes (SWNT) through a stepwise protocol is presented, thus yielding the sample SWNT-Ru. To do that, an-amino decorated phenanthroline is bonded to the nanotube by means of the diazonium chemistry protocol, providing anchoring points for discrete organometallic units as depicted by the solid characterization techniques employed. The hybrid material, able to emit upon excitation, is active in the visible light-driven photocatalytic oxidation of organic sulfides to sulfoxides. SWNT-Ru presents a wide scope being able to convert more than 10 substrates with different characteristics, including added-value chemicals, with a stable performance over more than 6 cycles without metal leaching and enhanced activity compared to related homogeneous complexes. A versatile character is also demonstrated since this hybrid catalyst follows both possible photooxidation mechanisms.

Template Synthesis of Cyclometalated Macrocycle Iridium(III) Complexes Based on Photoinduced C-N Cross-Coupling Reactions In Situ

The synthesis of metal macrocycle complexes holds paramount importance in coordination and supramolecular chemistry. Toward this end, we report a new, mild, and efficient protocol for the synthesis of cyclometalated macrocycle Ir(III) complexes: [Ir(L1)](PF6) (1), [Ir(L2)](PF6) (2), and [Ir(L3)](PF6) (3), where L1 presents 10,17-dioxa-3,6-diaza-2(2,8),7(8,2)-diquinolina-1,8(1,4)-dibenzenacyclooctadecaphane, L2 is 10,13,16,19,22,25-hexaoxa-3,6-diaza-2(2,8),7(8,2)-diquinolina-1,8(1,4)-dibenzenacyclohexacosaphane, and L3 is 4-methyl-10,13,16,19,22,25-hexaoxa-3,6-diaza-2(2,8),7(8,2)-diquinolina-1,8(1,4)-dibenzenacyclohexacosaphane. This synthesis involves the preassembly of two symmetric 2-phenylquinoline arms into C-shape complexes, followed by cyclization with diamine via in situ interligand C-N cross-coupling, employing a metal ion as a template. Moreover, the synthetic yield of these cyclometalated Ir(III) complexes, tethered by an 18-crown-6 ether-like chain, is significantly enhanced in the presence of K+ ion as a template. The resultant cyclometalated macrocycle Ir(III) complexes exhibit high stability, efficient singlet oxygen generation, and superior catalytic activity for the aerobic selective oxidation of sulfides into sulfoxides under visible light irradiation in aqueous media at room temperature. The photocatalyst 2 demonstrates recyclability and can be reused at least 10 times without a significant loss of catalytic activity. These results unveil a new and complementary approach to the design and in situ synthesis of cyclometalated macrocycle Ir(III) complexes via a mild interligand-coupling strategy.

Photocatalytic functionalization of thin-layer membranes using a monomer truncation strategy

We present the design and synthesis of two new organic polymer films making use of a liquid-liquid interfacial amine-acid chloride polymerization strategy. One of them was additionally functionalized in situ by the anchoring of N-phenyl-phenothiazine through a monomer truncation strategy, which endowed it with photocatalytic activity. This photoactive film displays interesting luminescence phenomena that were used for the oxidation of a variety of sulphides to their corresponding sulfoxides and reduction of aryl bromines.

Recyclable and Stable Porphyrin-Based Self-Assemblies by Electrostatic Force for Efficient Photocatalytic Organic Transformation

Development of efficient, stable, and recyclable photocatalysts for organic synthesis is vital for transformation of traditional thermal organic chemistry into green sustainable organic chemistry. In this work, the study reports an electrostatic approach to assemble meso-tetra (4-sulfonate phenyl) porphyrin (TPPS)tetra (4-sulfonate phenyl) porphyrin (TPPS) as a donor and benzyl viologen (BV) as an acceptor into stable and recyclable photocatalyst for an efficient organic transformation reaction - aryl sulfide oxidation. By use of the electrostatic TPPS-BV photocatalysts, 0.1 mmol aryl sulfide with electron-donating group can be completely transformed into aryl sulfoxide in 60 min without overoxidation into sulfone, rendering near 100% yield and selectivity. The photocatalyst can be recycled up to 95% when 10 mg amount is used. Mechanistic study reveals that efficient charge separation between TPPS and BV results in sufficient formation of superoxide which further reacts with the oxidized sulfide by the photocatalyst to produce the sulfoxide. This mechanistic pathway differs significantly from the previously proposed singlet oxygen-dominated process in homogeneous TPPS photocatalysis.

On the mechanism of visible-light sensitized photosulfoxidation of toluidine blue O

We report on the formation of toluidine blue O (TBO) sulfoxide by a self-sensitized photooxidation of TBO. Here, the photosulfoxidation process was studied by mass spectrometry (MS) and discussed in the context of photodemethylation processes which both contribute to TBO consumption over time. Analysis of solvent effects with D2O, H2O, and CH3CN along with product yields and MS fragmentation patterns provided mechanistic insight into TBO sulfoxide's formation. The formation of TBO sulfoxide is minor and detectable up to 12% after irradiation of 3 h. The photosulfoxidation process is dependent on oxygen wherein instead of a type II (singlet oxygen, 1O2) reaction, a type I reaction involving TBO to reach the TBO sulfoxide is consistent with the results. Density functional theory results point to the formation of the TBO sulfoxide by the oxidation of TBO via transiently formed peroxyl radical or thiadioxirane intermediates. We discover that the TBO photosulfoxidation arises competitively with TBO photodemethylation with the latter leading to formaldehyde formation.

Phosphonate-substituted porphyrins as efficient, cost-effective and reusable photocatalysts

Recent advances in visible light photocatalysis represent a significant stride towards sustainable catalytic chemistry. However, its successful implementation in fine chemical production remains challenging and requires careful optimization of available photocatalysts. Our work aims to structurally modify bioinspired porphyrin catalysts, addressing issues related to their laborious synthesis and low solubility, with the goal of increasing their efficiency and developing reusable catalytic systems. We have demonstrated the catalytic potential of readily available meso-tetrakis[4-(diethoxyphosphoryl)phenyl]porphyrins (M(TPPP)). Novel metal (Pd(II), Co(II) and In(III)) complexes with this ligand were prepared in good yields. These chromophores were characterized in solution using spectroscopic (NMR, UV-vis, fluorescence) and electrochemical methods. The introduction of phosphonate groups on the phenyl substituents of meso-tetraphenylporphyrins (M(TPP)) improves solubility in polar organic solvents without significantly altering the photophysical properties and photostability of complexes. This structural modification also leads to easier reductions and harder oxidations of the macrocycle for all investigated complexes compared to the corresponding TPP derivatives. The free base porphyrin, zinc(II), palladium(II), and indium(III) complexes were studied as photocatalysts for oxidation of sulfides to sulfoxides using molecular oxygen as a terminal oxidant. Both dialkyl and alkyl aryl sulfides were quantitatively transformed into sulfoxides under blue LED irradiation in the acetonitrile-water mixture (10 : 1 v/v) with a low loading (0.005-0.05 mol%) of porphyrin photocatalysts, where H2(TPPP) and Pd(TPPP) were found to be the most efficient. The reaction mechanism was studied using photoluminescence and EPR spectroscopies. Then, to access reusable catalysts, water-soluble derivatives bearing phosphonic acid groups, H2(TPPP-A) and Pd(TPPP-A), were prepared in high yields. These compounds were characterized using spectroscopic methods. Single-crystal X-ray diffraction analysis of Pd(TPPP-A) reveals that the complex forms a 3D hydrogen-bonded organic framework (HOF) in the solid state. Both H2(TPPP-A) and Pd(TPPP-A) were found to catalyze the photooxidation of sulfides by molecular oxygen in the acetonitrile-water mixture (1 : 1 v/v), while only Pd(TPPP-A) resulted in selective production of sulfoxides. The complex Pd(TPPP-A) was easily recovered through extraction in the aqueous phase and successfully reused in five consecutive cycles of the sulfoxidation reaction.

A Porous Carbazolic Al-MOF for Efficient Aerobic Photo-Oxidation of Sulfides into Sulfoxides under Air

A robust, microporous, and photoactive aluminum-based metal-organic framework (Al-MOF, LCU-600) has been assembled by an in situ-formed [Al3O(CO2)6] trinuclear building unit and a tritopic carbazole ligand. LCU-600 shows a high water stability and permanent porosity for N2 and CO2 adsorption. Notably, the incorporation of photoresponsive carbazole moieties into LCU-600 makes it a highly efficient and recyclable photocatalyst for aerobic photo-oxidation of sulfides into sulfoxides under an air atmosphere at room temperature. Mechanism investigations unveil that photogenerated holes (h+), superoxide radical anion (O2•-), and singlet oxygen (1O2) are critical active spices for the photo-oxidation reaction performed in an air atmosphere.

A Green Environmental Protection Photocatalytic Molecular Reactor for Aerobic Oxidation of Sulfide to Sulfoxide

The design and synthesis of metal-organic frameworks (MOFs) as photocatalytic molecular reactors for varied reactions have drawn great attention. In this work, we designed a novel photoactive perylenediimides-based (PDI) carboxylate ligand N,N'-di(3',3",5',5"-tetrakis(4-carboxyphenyl))-1,2,6,7-tetrachloroperylene-3,4,9,10-tetracarboxylic acid diimide (Cl-PDI-TA) and use it to successfully synthesize a novel Zr(IV)-based MOF 1 constructed from [Zr6 O8 (H2 O)8 ]8+ clusters bridged by Cl-PDI-TA ligands. Structural analysis revealed that Zr-MOF 1 manifests a 3D framework with (4,8)-connected csq topology and possesses triangular channels of ~17 Å and mesoporous hexagonal channels of ~26 Å along c-axis. Moreover, the synthesized Zr-MOF 1 exhibits visible-light absorption and efficient photoinduced free radical generation property, making it a promising photocatalytic molecular reactor. When Zr-MOF 1 was used as a photocatalyst for the aerobic oxidation of sulfides under irradiation of visible light, it could afford the corresponding sulfoxides with high yield and selectivity. Experimental results demonstrated that the substrate sulfides could be fixed in the pores of 1 and directly transformed to the products sulfoxides in the solid state. Furthermore, the mechanism for the photocatalytic transformation was also investigated and the results revealed that the singlet oxygen (1 O2 ) and superoxide radical (O2 ⋅- ) generated by the energy transfer and electron transfer from the photoexcited Zr-MOF to oxidants were the main active species for the catalytic reactions. This work offers a perceptive comprehension of the mechanism in PDI-based MOFs for further study on photocatalytic reactions.

Phenylbenzothiazole-Based Platinum(II) and Diplatinum(II) and (III) Complexes with Pyrazolate Groups: Optical Properties and Photocatalysis

Based on 2-phenylbenzothiazole (pbt) and 2-(4-dimethylaminophenyl)benzothiazole (Me2N-pbt), mononuclear [Pt(pbt)(R'2-pzH)2]PF6 (R'2-pzH = pzH 1a, 3,5-Me2pzH 1b, 3,5-iPr2pzH 1c) and diplatinum (PtII-PtII) [Pt(pbt)(μ-R'2pz)]2 (R'2-pz = pz 2a, 3,5-Me2pz 2b, 3,5-iPr2pz 2c) and [Pt(Me2N-pbt)(μ-pz)]2 (3a) complexes have been prepared. In the presence of sunlight, 2a and 3a evolve, in CHCl3 solution, to form the PtIII-PtIII complexes [Pt(R-pbt)(μ-pz)Cl]2 (R = H 4a, NMe2 5a). Experimental and computational studies reveal the negligible influence of the pyrazole or pyrazolate ligands on the optical properties of 1a-c and 2a,b, which exhibit a typical 3IL/3MLCT emission, whereas in 2c the emission has some 3MMLCT contribution. 3a displays unusual dual, fluorescence (1ILCT or 1MLCT/1LC), and phosphorescence (3ILCT) emissions depending on the excitation wavelength. The phosphorescence is lost in aerated solutions due to sensitization of 3O2 and formation of 1O2, whose determined quantum yield is also wavelength dependent. The phosphorescence can be reversibly photoinduced (365 nm, ∼ 15 min) in oxygenated THF and DMSO solutions. In 4a and 5a, the lowest electronic transitions (S1-S3) have mixed characters (LMMCT/LXCT/L'XCT 4a and LMMCT/LXCT/ILCT 5a) and they are weakly emissive in rigid media. The 1O2 generation property of complex 3a is successfully used for the photooxidation of p-bromothioanisol showing its potential application toward photocatalysis.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

Tailoring flavin-based photosensitizers for efficient photooxidative coupling of benzylic amines

Photooxidative coupling of benzylic amines using naturally abundant O2 as an oxidant under visible light irradiation is an alternative green approach to synthesis imines and is of both fundamental and practical significance. We investigated the photophysical properties of flavin (FL) that is a naturally available sensitizer and its derivatives, i.e. 9-bromoflavin (MB-FL), 7,8-dibromoflavin (DB-FL) and 10-phenylflavin (Ph-FL), as well as the performance of these FL-based sensitizers (FLPSs) in the photooxidative coupling of benzylic amines to imines combining experimental and theoretical efforts. We showed that chemical functionalization with Br and phenyl effectively improves the photophysical properties of these FLPSs, in terms of absorption in the visible light range, singlet oxygen quantum yields, triplet lifetime, etc. Apart from nearly quantitative selectivity for the production of imines, the performance of DB-FL is superior to those of other FLPSs, and it is among the best photocatalysts for imine synthesis. Specifically, 0.5 mol% DB-FL is capable of converting 91% of 0.2 mmol benzylamine and more than 80% of 0.2 mmol fluorobenzylic amine derivatives into their corresponding imines in 5 h batch runs. Mechanistic investigation finely explained the observed photophysical properties of FLPSs and highlighted the dominant role of electron transfer in FLPS sensitized coupling of benzylic amines to imines. This work not only helps to understand the pathways for photocatalysis with FLPSs but also paves the way for the design of novel and efficient PSs to promote organic synthesis.

A Photoredox/Sulfide Dual Catalysis System That Uses Sulfide Radical Cations to Promote Alkene Chlorotrifluoromethylation

Sulfides and their derivatives are among the most important class of reagent in synthetic chemistry. Despite the importance of such compounds, the use of sulfide radical cations in synthetic chemistry is underdeveloped. To address this issue, herein, we describe alkene chlorotrifluoromethylation reactions promoted by photoredox/sulfide dual catalysis systems, which involves sulfide radical cations generated through the oxidation of sulfides by a photoredox catalyst. The high functional group tolerance of this chemistry was demonstrated using natural products and drug molecules as substrate alkenes.

KuQuinone as a Highly Stable and Reusable Organic Photocatalyst in Selective Oxidation of Thioethers to Sulfoxides

A chemoselective photocatalytic system to perform thioether oxidation to sulfoxide is presented. The light-induced oxidation process is here promoted by a metal-free quinoid catalyst, namely 1-hexylKuQuinone (KuQ). Reactions performed in a fluorinated solvent (i.e., HFIP), using O₂ as the oxidant, at room temperature, lead to complete thioanisole conversion to methyl phenyl sulfoxide in 60 min. Remarkably, the system can be recharged and recycled without a loss of activity and selectivity, reaching turnover numbers (TONs) higher than 4000. Excellent catalytic performances and full selectivity have also been obtained for the photocatalytic oxidation of substituted thioanisole derivatives, aliphatic, cyclic, and diaryl thioethers. Likewise, the oxidation of heteroaromatic organosulfur compounds can be accomplished, with longer reaction times.

A Self‐Assembling Flavin for Visible Photooxidation

A new flavin‐based gelator is reported which forms micellar structures at high pH and gels at low pH. This flavin can be used for the photooxidation of thiols under visible light, with the catalytic efficiency being linked to the self‐assembled structures present.

Photocatalytic Aerobic Dehydrogenation of N-Heterocycles with Ir(III) Photosensitizers Bearing the 2(2'-Pyridyl)benzimidazole Scaffold

Photoredox catalysis constitutes a very powerful tool in organic synthesis, due to its versatility, efficiency, and the mild conditions required by photoinduced transformations. In this paper, we present an efficient and selective photocatalytic procedure for the aerobic oxidative dehydrogenation of partially saturated N-heterocycles to afford the respective N-heteroarenes (indoles, quinolines, acridines, and quinoxalines). The protocol involves the use of new Ir(III) biscyclometalated photocatalysts of the general formula [Ir(C^N)₂(N^N')]Cl, where the C^N ligand is 2-(2,4-difluorophenyl)pyridinate, and N^N' are different ligands based on the 2-(2'-pyridyl)benzimidazole scaffold. In-depth electrochemical and photophysical studies as well as DFT calculations have allowed us to establish structure-activity relationships, which provide insights for the rational design of efficient metal-based dyes in photocatalytic oxidation reactions. In addition, we have formulated a dual mechanism, mediated by the radical anion superoxide, for the above-mentioned transformations.

Electronic control over site-selectivity in hydrogen atom transfer (HAT) based C(sp3)-H functionalization promoted by electrophilic reagents

The direct functionalization of C(sp³)-H bonds represents one of the most investigated approaches to develop new synthetic methodology. Among the available strategies for intermolecular C-H bond functionalization, increasing attention has been devoted to hydrogen atom transfer (HAT) based procedures promoted by radical or radical-like reagents, that offer the opportunity to introduce a large variety of atoms and groups in place of hydrogen under mild conditions. Because of the large number of aliphatic C-H bonds displayed by organic molecules, in these processes control over site-selectivity represents a crucial issue, and the associated factors have been discussed. In this review article, attention will be devoted to the role of electronic effects on C(sp³)-H bond functionalization site-selectivity. Through an analysis of the recent literature, a detailed description of the HAT reagents employed in these processes, the associated mechanistic features and the selectivity patterns observed in the functionalization of substrates of increasing structural complexity will be provided.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

Autocatalytic aerobic ipso-hydroxylation of arylboronic acid with Hantzsch ester and Hantzsch pyridine

ipso-Hydroxylation of arylboronic acids with Hantzsch ester has been developed. The by-product Hantzsch pyridine was found to promote the reaction in the presence of oxygen under ambient conditions.

Ruthenium(II) complexes with phosphonate-substituted 1,10-phenanthroline ligands: synthesis, characterization and use in organic photocatalysis

Ru(II) complexes with polypyridyl ligands play a central role in the development of photocatalytic organic reactions. This work is aimed at the structural modification of such complexes to increase their...

Boosting Sulfides Photooxidation by Fusing Naphthalimide and Flavin together

Efficient and selective photocatalytic conversion of chemicals with visible light and naturally abundant resources has long been desired, but this requires finely designed sensitizers that are capable to convert light...

Highly Porous Poly(arylene cyano-vinylene) Beads Derived through the Knoevenagel Condensation of the Oil-in-Oil-in-Oil Double Emulsion Templates

Conjugated porous polymers through the emulsion-templating polymerization process are typically prepared as monoliths, and the emulsions are cured via metal-catalyzed cross-coupling reactions. Herein, we report the design and synthesis of well-defined, millimeter-sized conjugated porous polymer beads by combining an oil-in-oil-in-oil (O/O/O) double emulsion as a de novo template and an amino-catalyzed Knoevenagel condensation reaction as a polymerization chemistry to cure such emulsions. The 1,4-phenylenediacetonitrile is reacted with aromatic multialdehydes in the presence of piperidine, and a series of metal-free poly(arylene cyano-vinylene) beads are prepared. All beads exhibit 3D-interconnected microcellular morphology and substantial semiconducting properties, such as strong light harvesting ability in the visible light region with electrochemical band gaps in the range of 2.05-2.33 eV. Finally, the promising photocatalytic activity of these conjugated beads is demonstrated for a model sulfoxidation reaction under visible light irradiation, and near quantitative conversions with excellent chemoselectivities (>99%) are obtained.

Photocatalytic Oxidation Reactions Mediated by Covalent Organic Frameworks and Related Extended Organic Materials

Covalent Organic Frameworks (COFs) and related extended organic materials have been widely used as photocatalysts in the last few years. Such interest arises from the wide range of covalent linkages employed in their construction, which offer many possibilities to design extended frameworks and to link photoactive building blocks. Thus, the potential utility of predesigned organic photoactive fragments can be synergistically added to the inherent advantages of heterogeneous catalysis, such as recyclability and easy separation of catalyst. In this overview, the current state of the art on the design of organic materials for photocatalytic oxidation reactions will be presented. The designing process of these materials is usually conditioned by the generally accepted concept that crystallinity and porosity defines the quality of the heterogeneous catalysts obtained. The care for the structural integrity of materials obtained is understandable because many properties and applications are intimately related to these features. However, the catalytic activity does not always directly depends on these characteristics. A critical compilation of the available literature is performed in order to offer a general perspective of the use of COFs and Covalent Triazine Frameworks (CTFs) in photocatalytic oxidation processes, including water oxidation, which constitute an important outcome relevant to artificial photosynthesis.

Competition Between Cα -S and Cα -Cβ Bond Cleavage in β-Hydroxysulfoxides Cation Radicals Generated by Photoinduced Electron Transfer†

A kinetic and product study of the 3‐cyano‐N‐methyl‐quinolinium photoinduced monoelectronic oxidation of a series of β‐hydroxysulfoxides has been carried out to investigate the competition between C_α‐S and C_α‐C_β bond cleavage within the corresponding cation radicals. Laser flash photolysis experiments unequivocally established the formation of sulfoxide cation radicals showing their absorption band (λ_max ≈ 520 nm) and that of 3‐CN‐NMQ^• (λ_max ≈ 390 nm). Steady‐state photolysis experiments suggest that, in contrast to what previously observed for alkyl phenyl sulfoxide cation radicals that exclusively undergo C_α‐S bond cleavage, the presence of a β‐hydroxy group makes, in some cases, the C_α‐C_β scission competitive. The factors governing this competition seem to depend on the relative stability of the fragments formed from the two bond scissions. Substitution of the β‐OH group with ‐OMe did not dramatically change the reactivity pattern of the cation radicals thus suggesting that the observed favorable effect of the hydroxy group on the C_α‐C_β bond cleavage mainly resides on its capability to stabilize the carbocation formed upon this scission.

Luminescent cis-Bis(bipyridyl)ruthenium(II) Complexes with 1,2-Azolylamidino Ligands: Photophysical, Electrochemical Studies, and Photocatalytic Oxidation of Thioethers

New 1,2-azolylamidino complexes cis-[Ru(bipy)₂(NH═C(R)az*-κ²N,N)](OTf)₂ (R = Me, Ph; az* = pz, indz, dmpz) are synthesized via chloride abstraction after a subsequent base-catalyzed coupling of a nitrile with the previously coordinated 1,2-azole. The synthetic procedure allows the easy obtainment of complexes having different electronic and steric 1,2-azoylamidino ligands. All of the compounds have been characterized by ¹H, ¹³C, and ¹⁵N NMR and IR spectroscopy and by monocrystal X-ray diffraction. Photophysical studies support their phosphorescence, whereas their electrochemistry reveals reversible Ru^II/Ru^III oxidations between +1.13 and +1.25 V (vs SCE). The complexes have been successfully used as catalysts in the photooxidation of different thioethers, the complex cis-[Ru(bipy)₂(NH═C(Me)dmpz-κ²N,N)]²⁺ showing better catalytic performance in comparison to that of [Ru(bipy)₃]²⁺. Moreover, the significant catalytic performance of the dimethylpyrazolylamidino complex is applied to the preparation of the drug modafinil, which is obtained using ambient oxygen as an oxidant. Finally, mechanistic assays suggest that the oxidation reaction follows a photoredox route via oxygen radical anion formation.

Covalent Organic Frameworks toward Diverse Photocatalytic Aerobic Oxidations

Photoactive two-dimensional covalent organic frameworks (2D-COFs) have become promising heterogenous photocatalysts in visible-light-driven organic transformations. Herein, a visible-light-driven selective aerobic oxidation of various small organic molecules by using 2D-COFs as the photocatalyst was developed. In this protocol, due to the remarkable photocatalytic capability of hydrazone-based 2D-COF-1 on molecular oxygen activation, a wide range of amides, quinolones, heterocyclic compounds, and sulfoxides were obtained with high efficiency and excellent functional group tolerance under very mild reaction conditions. Furthermore, benefiting from the inherent advantage of heterogenous photocatalysis, prominent sustainability and easy photocatalyst recyclability, a drug molecule (modafinil) and an oxidized mustard gas simulant (2-chloroethyl ethyl sulfoxide) were selectively and easily obtained in scale-up reactions. Mechanistic investigations were conducted using radical quenching experiments and in situ ESR spectroscopy, all corroborating the proposed role of 2D-COF-1 in photocatalytic cycle.

An anthracene extended viologen-incorporated ionic porous organic polymer for efficient aerobic photocatalysis and antibacterial activity

A new conjugated ionic porous organic polymer (AN-POP), incorporated with anthracene-extended viologen, has been rationally designed and prepared to explore its dual functions in photocatalytic oxidation and bacterial killing. Compared with its anthracene-free counterpart (BD-POP), AN-POP showed a superior photocatalytic oxidation performance and antibacterial activity demonstrating the critical role of an anthracene-extended viologen structure.

Photooxidation of thiosaccharides mediated by sensitizers in aerobic and environmentally friendly conditions

A series of β-d-glucopyranosyl derivates have been synthesized and evaluated in photooxidation reactions promoted by visible light and mediated by organic dyes under aerobic conditions. Among the different photocatalysts employed, tetra-O-acetyl riboflavin afforded chemoselectively the respective sulfoxides, without over-oxidation to sulfones, in good to excellent yields and short reaction times. This new methodology for the preparation of synthetically useful glycosyl sulfoxides constitutes a catalytic, efficient, economical, and environmentally friendly oxidation process not reported so far for carbohydrates.

Fullerene soot and a fullerene nanodispersion as recyclable heterogeneous off-the-shelf photocatalysts

Metal-free heterogeneous photocatalysis, which requires no prior catalyst immobilization or chemical modification and can operate in green solvents, represents a highly-sought after, yet currently still underdeveloped, synthetic method. In this report we present a comparative study which aims to evaluate the use of unmodified fullerene soot and a fullerene nanodispersion as non-soluble and quasi-soluble carbon-based photocatalysts, respectively, for sulfide oxidation and other transformations using oxygen as an oxidant in ethanol. A wide range of sulfoxides were successfully prepared with good yields and chemoselectivity using a very low catalyst loading. The fullerene soot photocatalyst is easily recovered and shows excellent stability of the catalytic properties. The reaction was shown to proceed via a singlet oxygen pathway and has a high selectivity for aliphatic sulfides, whereas the oxidation of thioanisoles can be accomplished using an amine mediated electron transfer mechanism. The applicability of the fullerene nanodispersion as a general purpose photocatalyst was demonstrated in radical cyclization, boronic acid oxidation and imine formation reactions.

β-Diketone boron difluoride dye-functionalized conjugated microporous polymers for efficient aerobic oxidative photocatalysis

Two new conjugated microporous polymers, TPB-B-CMP and TPA-B-CMP, with β-diketone-boron difluoride dye as the key building block were designed and successfully prepared. They were further employed as efficient metal-free heterogeneous photocatalysts.

Bis(terpyridine) Ru(iii) complex functionalized porous polycarbazole for visible-light driven chemical reactions

Bis(terpyridine)Ru(iii) complex functionalized porous polycarbazole for photocatalytic amine coupling, aerobic hydroxylation of arylboronic acids, and selective oxidation of sulfides.

Photoredox-Mediated Synthesis of Functionalized Sulfoxides from Terminal Alkynes

A photoredox-mediated protocol for the synthesis of α-alkoxy-β-ketosulfoxides and α,β-dialkoxysulfoxides using alkynes, thiol, and alcohols is reported. This work presents a rare single-step synthesis of α-substituted sulfoxides, involving tandem introduction of a thiol and alcohol as a key enabling advancement. Furthermore, the method can be easily employed to access vinyl sulfoxides and β-ketosulfoxides.

Metal–Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs) Applied to Photocatalytic Organic Transformations

Among the different alternatives for catalysis using metal–organic frameworks (MOFs) or covalent organic frameworks (COFs), photocatalysis has remarkably evolved during the last decade. Photocatalytic reticular materials allowed recyclability and easy separation of catalyst from the product, also reaching the activity and selectivity commonly observed for molecular systems. Recently, photocatalytic MOFs and COFs have been applied to synthetic applications in order to obtain organic molecules of different complexity. However, although a good number of works have been devoted to this issue, an updated comprehensive revision on this field is still needed. The aim of this review was to fill this gap covering the following three general aspects: (1) common strategies on the design of reticular photocatalytic materials, (2) a comprehensive discussion of the photocatalytic organic reactions achieved by the use of COFs and MOFs, and (3) some critical considerations highlighting directions that should be considered in order to make advances in the study of photocatalytic COFs and MOFs.