Advances in Hierarchical Inorganic Nanostructures for Efficient Solar Energy Harvesting Systems

The urgent need to address the global energy and environmental crisis necessitates the development of efficient solar-power harvesting systems. Among the promising candidates, hierarchical inorganic nanostructures stand out due to their exceptional attributes, including a high specific surface area, abundant active sites, and tunable optoelectronic properties. In this comprehensive review, we delve into the fundamental principles underlying various solar energy harvesting technologies, including dye-sensitized solar cells (DSSCs), photocatalytic, photoelectrocatalytic (water splitting), and photothermal (water purification) systems, providing a foundational understanding of their operation. Thereafter, the discussion is focused on recent advancements in the synthesis, design, and development of hierarchical nanostructures composed of diverse inorganic material combinations, tailored for each of these solar energy harvesting systems. We meticulously elaborate on the distinct synthesis methods and conditions employed to fine-tune the morphological features of these hierarchical nanostructures. Furthermore, this review offers profound insights into critical aspects such as electron transfer mechanisms, band gap engineering, the creation of hetero-hybrid structures to optimize interface chemistry through diverse synthesis approaches, and precise adjustments of structural features. Beyond elucidating the scientific fundamentals, this review explores the large-scale applications of the aforementioned solar harvesting systems. Additionally, it addresses the existing challenges and outlines the prospects for achieving heightened solar-energy conversion efficiency.

Fe3O4@WO3-E-SMTU-NiII: as an environmentally-friendly, recoverable, durable and noble-free nanostructured catalyst for C-C bond formation reaction in green media

In the present study, NiII immobilized on Fe3O4@WO3 functionalized by aminated epichlorohydrin using S-methylisothiourea (Fe3O4@WO3-E-SMTU-NiII) as a novel magnetically separable nanostructured catalyst was successfully synthesized and characterized using FT-IR, XRD, TEM, FE-SEM, EDX, EDX mapping, VSM, TGA, H2-TPR, ICP-OES and CHNS techniques. Characterization results revealed the spherical morphology and superparamagnetic behaviour of the as-synthesized catalyst with mean diameters of 19-31 nm as well as uniform distributions of the desired elements (Fe, O, W, C, N, S and Ni). The antibacterial activity of Fe3O4@WO3-E-SMTU-NiII was evaluated against a set of Gram positive and Gram negative bacteria, and the catalyst showed considerable activity against the Staphylococcus aureus strain. The aforementioned nanostructured catalyst exhibited perfect catalytic efficiency in the Heck-Mizoroki and Suzuki-Miyaura reactions under mild conditions without using toxic solvents (EtOH as a green solvent and WEB as a benign base). Desired coupled products were obtained from the reaction of different Ar-X (X = I, Br, Cl) with alkyl acrylates and arylboronic acids. A high nickel content with negligible metal leaching during the course of reactions led to the high catalytic performance and stability of Fe3O4@WO3-E-SMTU-NiII under optimized reaction conditions. The magnetically separation and ease of recovery and reusability of up to six cycles without a discernible decrease in catalytic activity or metal leaching are the most important features of the catalytic system from both industrial and environmental viewpoints.

One-step construction of hexagonal WO3 nano-shuttles with enhanced lithium storage performance

In this work, WO3 nanorod-based aggregates and WO3 nano-shuttles were constructed by a facile hydrothermal route. The structure, morphology, element composition and valence state of the formed WO3 samples were characterized using different testing instruments. As the active anode for lithium-ion batteries, the WO3 nano-shuttle electrode can deliver a reversible specific capacity of 614.7 mA h g-1 after 300 cycles at a current density of 500 mA g-1. The excellent electrochemical properties indicate that WO3 nano-shuttles are a prospective anode candidate for high performance lithium-ion batteries.

Rugged Forest Morphology of Magnetoplasmonic Nanorods that Collect Maximum Light for Photoelectrochemical Water Splitting

A feasible nanoscale framework of heterogeneous plasmonic materials and proper surface engineering can enhance photoelectrochemical (PEC) water-splitting performance owing to increased light absorbance, efficient bulk carrier transport, and interfacial charge transfer. This article introduces a new magnetoplasmonic (MagPlas) Ni-doped Au@Fex Oy nanorods (NRs) based material as a novel photoanode for PEC water-splitting. A two stage procedure produces core-shell Ni/Au@Fex Oy MagPlas NRs. The first-step is a one-pot solvothermal synthesis of Au@Fex Oy . The hollow Fex Oy nanotubes (NTs) are a hybrid of Fe2 O3 and Fe3 O4 , and the second-step is a sequential hydrothermal treatment for Ni doping. Then, a transverse magnetic field-induced assembly is adopted to decorate Ni/Au@Fex Oy on FTO glass to be an artificially roughened morphologic surface called a rugged forest, allowing more light absorption and active electrochemical sites. Then, to characterize its optical and surface properties, COMSOL Multiphysics simulations are carried out. The core-shell Ni/Au@Fex Oy MagPlas NRs increase photoanode interface charge transfer to 2.73 mAcm-2 at 1.23 V RHE. This improvement is made possible by the rugged morphology of the NRs, which provide more active sites and oxygen vacancies as the hole transfer medium. The recent finding may provide light on plasmonic photocatalytic hybrids and surface morphology for effective PEC photoanodes.

A review of tungsten trioxide (WO3)-based materials for antibiotics removal via photocatalysis

Antibiotics are extensively used in human medicine and animal breeding. The use of antibiotics has posed significant risks and challenges to the natural water environment. On a global scale, antibiotics have been frequently detected in the environment, azithromycin (254-529 ng·L^-1), ciprofloxacin (245-1149 ng·L^-1), ofloxacin (518-1998 ng·L^-1), sulfamethoxazole (1325-5053 ng·L^-1), and tetracycline (31.4-561 ng·L^-1) are the most detected antibiotics in wastewater and surface water. Abuses of antibiotics has caused a significant threat to water resources and has seriously threatened the survival of human beings. Therefore, there is an urgent need to reduce antibiotic pollution and improve the environment. Researchers have been trying to develop effective methods and technologies for antibiotic degradation in water. Finding efficient and energy-saving methods for treating water pollutants has become an important global topic. Photocatalytic technology can effectively remove highly toxic, low-concentration, and difficult-to-treat pollutants, and tungsten trioxide (WO₃) is an extremely potential alternative catalyst. Pt/WO₃ photocatalytic degradation efficiency of tetracycline was 72.82%, While Cu-WO₃ photocatalytic degradation efficiency of tetracycline was 96.8%; WO₃/g-C₃N₄ photocatalytic degradation efficiency of ceftiofur was 70%, WO_3/W photocatalytic degradation efficiency of florfenicol was 99.7%; WO₃/CdWO₄ photocatalytic degradation efficiency of ciprofloxacin was 93.4%; WO₃/Ag photocatalytic degradation efficiency of sulfanilamide was 96.2%. Compared to other water purification methods, photocatalytic technology is non-toxic and ensures complete degradation through a stable reaction process, making it an ideal water treatment method. Here, we summarize the performance and corresponding principles of tungsten trioxide-based materials as a photocatalytic catalyst and provide substantial insight for further improving the photocatalytic potential of WO₃-based materials.

A magnetic X-band frequency microwave nanoabsorbent made of iron oxide/halloysite nanostructures combined with polystyrene

A novel nanocomposite has been designed and fabricated through an in situ polymerization process, based on iron oxide nanoparticles (Fe3O4 NPs), halloysite nanotubes (HNTs), and polystyrene (PS). The prepared nanocomposite (formulated as Fe3O4/HNT-PS) has been fully characterized through various methods, and its applicability in microwave absorption was investigated by using some single-layer and bilayer pellets containing nanocomposite and resin. The efficiency of the Fe3O4/HNT-PS composite with different weight ratios and pellets with the thickness of 3.0 and 4.0 mm were examined. Vector network analysis (VNA) revealed that the microwave (12 GHz) can be noticeably absorbed by Fe3O4/HNT-60% PS particles in a bilayer structure with 4.0 mm thickness and 85% resin of the pellets, resulting in a microwave absorption value of ca. -26.9 dB. The observed bandwidth (RL < -10 dB) was about 1.27 GHz, where ca. 95% of the radiated wave is absorbed. Ultimately, due to low-cost raw materials and high performance of the presented absorbent system, the Fe3O4/HNT-PS nanocomposite and the construction of the presented bilayer system can be subjected to further investigations to test and compare with other compounds for industrialization.

Synthesis and photocatalytic degradation of rhodamine B using ternary zeolite/WO3/Fe3O4composite

Demand for freshwater increases day by day as impurity increases due to the industrial, domestic and municipal waste in the water. Inappropriate disposal of coal fly ash (CFA) is not eco-friendly, therefore the need is to convert it into some beneficial material like zeolite. Zeolite-based composites with metal oxides show high cation interchange capacity, fast adsorption, and high efficiency for the removal of wastewater pollutants. In this research work, metal oxide along with zeolite (derived for CFA) was prepared. Metal oxide (WO₃) and magnetite (Fe₃O₄) based zeolite composite was used adsorption enhanced photocatalytic degradation of rhodamine B dye. Ternary composite (zeolite/WO₃/Fe₃O₄) was characterized using a scanning electron microscope, x-ray diffraction, Fourier transform infrared spectroscopy. The bandgap energy of composite was estimated using Tauc plot method from the data obtained after UV-visible spectroscopy. The behavior of composite under acidic and basic conditions was analyzed using pH_pzcof the composite. Influencing parameters like pH, dye concentration, contact time, and catalyst dosage was optimized under ultraviolet irradiations (254 nm). The results show that maximum degradation was achieved with zeolite/WO₃/Fe₃O₄composite under optimized conditions of pH = 7, catalyst dosage = 10 mg/100 ml, RhB concentration 10 ppm, and time 60 min. The first-order kinetic model was best fitted to the experimental data. RSM was used as a statistical tool to analyze the data.

Coatings of magnetic composites of iron oxide and carbon nitride for photocatalytic water purification

Magnetic composites of iron oxide (α-Fe2O3 and Fe3O4) and carbon nitride materials (CN) were synthesized via a microwave assisted hydrothermal method starting from iron salts and CN, which was obtained by thermal decomposition of dicyandiamide. The as-prepared composites with iron oxide loadings of 0.5 ω%-6 ω% were characterized by powder X-ray diffraction (PXRD), diffuse reflectance UV-vis spectroscopy, magnetization measurements, nitrogen adsorption measurements and thermogravimetric analyzes (TGA). The composites were examined for the degradation rate of an aqueous rhodamine B (RhB) solution under visible light irradiation. The magnetic composite α-Fe2O3(3 ω%)/CN enables 82% degradation of RhB within 90 min. Therefore, this material was selected for an immobilization approach and deposited using a spray coating technique on a magnetic polymer substrate. Coatings with loadings from 1.1 mg to 3.6 mg were compared with regard to their activity for the photocatalytic degradation of RhB under visible light irradiation. The substrate loaded with 0.4 mg cm-2 catalyst enables a RhB degradation of 61% within 8 h. Photocatalytic degradation of triclosan and ethinyl estradiol was also successful and both compounds were degraded with up to 46% of the initial concentration within 8 h. ICP-MS measurements of the pollutant solutions after photocatalytic treatment showed that leaching does not occur.

Synthesis of carbon dots@Fe3O4 and their photocatalytic degradation properties to hexaconazole

The CD@Fe₃O₄ photocatalysts were synthesized via hydrothermal synthesis method. The CD@Fe₃O₄ particles were synthesized using Fe₃O₄ as the core and using citric acid and ethylenediamine as a raw material, which were heated to 200 °C for 4 h. The synthesized fluorescent CD@Fe₃O₄ was characterized by HR-TEM, IR and fluorescence spectrophotometer. The HR-TEM results showed CD and Fe₃O₄ nanoparticles were uniform, mono-dispersed sphere or hemisphere particles with an average size of approximately 3 nm, and particle size of CD@Fe₃O₄ were mainly in range of 20-30 nm. XRD results showed the nanoparticles mainly belonged to Fe₃O₄ and CD@Fe₃O₄, which made recycling our photocatalysts possible due to the magnetic performance. On daylight lamp, the half-life of hexaconazole in CD@Fe₃O₄ photocatalysts was about 4 days, and it is lower than half-life (over 100 days) of hexaconazole without CD@Fe₃O₄ photocatalysts.

Advances in nanomaterials for heterogeneous photocatalysis

Photocatalysis method for environmental applications has been using for a long time. This review article traces back the origin of catalysis, its classification and journey of development to heterogeneous photocatalysis and the article’s novelty is in the simplicity, and easily understandable language, designed for the beginners. These heterogeneous photocatalysts are grouped into eleven different categories. As the paper is focused on photocatalysis, an insight on fundamental principles and mechanisms of photocatalysis are explained systematically with schematic illustrations and reactions that take place during redox- oxidation and reduction reactions in photocatalysis. With an approach towards utilizing green energy and expanding the photocatalyst’ absorption wavelength range towards the visible regime, bandgap engineering techniques by adopting doping and hetero-structures are explained with examples of different materials. In addition, dominating factors of photocatalysis reaction viz. composition of a heterogeneous photocatalyst, doping, hetero-structures, pH, surface defects on photocatalysis reaction are explored, focussing on variable charge transfer mechanisms. The main influencing factor in generating reactive oxygen species is pH of the photocatalysis reaction and are studied indetail. The effect of alkalinity or acidity in catalyst surfaces and molecular interaction depending upon the point zero charges of the photocatalyst are discussed. For the better study of catalyst properties, careful analysis and study is a much-needed field as a scope for further improvement. Hence, this article will guide a beginner to understand the photocatalysis topic with ease.

Efficient removal of antibiotic thiamphenicol by pulsed discharge plasma coupled with complex catalysis using graphene-WO3-Fe3O4 nanocomposites

Pulsed discharge plasma (PDP) induced complex catalysis for synergetic removal of thiamphenicol (TAP) was investigated using graphene-WO₃-Fe₃O₄ nanocomposites. The prepared samples were characterized systematically in view of the structure and morphology, chemical bonding state, optical property, electrochemical property and magnetic property. Based on characterization and TAP degradation, the catalytic performance followed: graphene-WO₃-Fe₃O₄>graphene-WO₃>WO₃, and the highest removal efficiency and kinetic constant could reached 99.3% and 0.070 min^-1, respectively. With increase of catalyst dosage, the removal efficiency firstly enhanced and then declined. Lower pH value was beneficial for TAP degradation. The prepared graphene-WO₃-Fe₃O₄ owed higher stability and lower dissolution rate of iron ion. The rGO-WO₃-Fe₃O₄ could decompose O₃ and H₂O₂ into more ·OH in PDP system. The degradation intermediates were characterized by fluorescence spectrograph, LC-MS and IC. Based on the detected intermediates and discrete Fourier transform (DFT) analysis, degradation pathway of TAP was proposed. Besides, the toxicity of intermediates was predicted. Finally, catalytic degradation mechanism of TAP by PDP with graphene-WO₃-Fe₃O₄ was summarized.

Biotechnology and nanotechnology for remediation of chlorinated volatile organic compounds: current perspectives

Chlorinated volatile organic compounds (CVOCs) are persistent organic pollutants which are harmful to public health and the environment. Many CVOCs occur in substantial quantities in groundwater and soil, even though their use has been more carefully managed and restricted in recent years. This review summarizes recent data on several innovative treatment solutions for CVOC-affected media including bioremediation, phytoremediation, nanoscale zero-valent iron (nZVI)-based reductive dehalogenation, and photooxidation. There is no optimally developed single technology; therefore, the possibility of using combined technologies for CVOC remediation, for example bioremediation integrated with reduction by nZVI, is presented. Some methods are still in the development stage. Advantages and disadvantages of each treatment strategy are provided. It is hoped that this paper can provide a basic framework for selection of successful CVOC remediation strategies.

Photocatalytic and Antibacterial Properties of Ag-CuFe2O4@WO3 Magnetic Nanocomposite

This study aimed to synthesize a new magnetic photocatalytic nanosystem composed of Ag-CuFe2O4@WO3 and to investigate its photodegradation efficiency for two drug pollutants of Gemfibrozil (GEM) and Tamoxifen (TAM) under Ultraviolet (UV) light irradiation. In this regard, the effect of pH, catalyst dosage, and drug concentration was thoroughly determined. The largest photodegradation level for GEM (81%) and TAM (83%) was achieved at pH 5, a photocatalyst dosage of 0.2 g/L, drug concentration of 5 mg/L, and contact time of 150 min. The drug photodegradation process followed the pseudo first-order kinetic model. In addition to the photodegradation effect, the nanocomposites were proved to be efficient in terms of antibacterial activity, proportional to the Ag doping level. The Ag-CuFe2O4@WO3 nanocomposite exhibited a stable, efficient performance without an obvious catalytic loss after five successive cycles. Taken together, the developed magnetic photocatalyst is able to simultaneously disinfect wastewater streams and to degrade pharmaceutical contaminants and thus shows a promising potential for purification of multi-contaminant water systems.

Synthesis and characterization of Ni-doped anatase TiO2 loaded on magnetic activated carbon for rapidly removing triphenylmethane dyes

In this work, we employed the in situ synthesis method to implant Fe₃O₄ into activated carbon (AC), in which the synthesis of the magnetic AC (MAC) was realized. Thence, Ni-doped anatase TiO₂ (NATiO₂) were anchored on different addition amount of MAC to synthesize the series of Ni-TiO₂/MAC photocatalysts. The chemical compositions and physical properties of these nanocomposites were analyzed by various characterization technologies. The photocatalytic capabilities of as-produced materials were then investigated via adsorption and photodegradation of triphenylmethane dyes (TPMs) as crystal violet (CV), basic fuchsine (BF), and malachite green (MG) solution. The results revealed that the removal of Ni-TiO₂/AC, Ni-TiO₂/2MAC, Ni-TiO₂/4MAC, and Ni-TiO₂/8MAC on TPMs is a very fast process and the removal efficiency can almost reach to about 90% in 10 min, and the catalyst has good cycle stability and is easy to be reused. This work provides a novel, low-cost, and effective way to rationally design and synthesize TiO₂-based photocatalysts for effective removal of TPMs.

Review on the treatment of organic wastewater by discharge plasma combined with oxidants and catalysts

Discharge plasma technology is a new advanced oxidation technology for water treatment, which includes the effects of free radical oxidation, high energy electron radiation, ultraviolet light hydrolysis, and pyrolysis. In order to improve the energy efficiency in the plasma discharge processes, many efforts have been made to combine catalysts with discharge plasma technology. Some heterogeneous catalysts (e.g., activated carbon, zeolite, TiO₂) and homogeneous catalysts (e.g., Fe²⁺/Fe³⁺, etc.) have been used to enhance the removal of pollutants by discharge plasma. In addition, some reagents of in situ chemical oxidation (ISCO) such as persulfate and percarbonate are also discussed. This article introduces the research progress of the combined systems of discharge plasma and catalysts/oxidants, and explains the different reaction mechanisms. In addition, physical and chemical changes in the plasma catalytic oxidation system, such as the effect of the discharge process on the catalyst, and the changes in the discharge state and solution conditions caused by the catalysts/oxidants, were also investigated. At the same time, the potential advantages of this system in the treatment of different organic wastewater were briefly reviewed, covering the degradation of phenolic pollutants, dyes, and pharmaceuticals and personal care products. Finally, some suggestions for future water treatment technology of discharge plasma are put forward. This review aims to provide researchers with a deeper understanding of plasma catalytic oxidation system and looks forward to further development of its application in water treatment.

A Systematic Review of Metal Oxide Applications for Energy and Environmental Sustainability

Energy is the fundamental requirement of all physical, chemical, and biological processes which are utilized for better living standards. The toll that the process of development takes on the environment and economic activity is evident from the arising concerns about sustaining the industrialization that has happened in the last centuries. The increase in carbon footprint and the large-scale pollution caused by industrialization has led researchers to think of new ways to sustain the developmental activities, whilst simultaneously minimizing the harming effects on the enviroment. Therefore, decarbonization strategies have become an important factor in industrial expansion, along with the invention of new catalytic methods for carrying out non-thermal reactions, energy storage methods and environmental remediation through the removal or breakdown of harmful chemicals released during manufacturing processes. The present article discusses the structural features and photocatalytic applications of a variety of metal oxide-based materials. Moreover, the practical applicability of these materials is also discussed, as well as the transition of production to an industrial scale. Consequently, this study deals with a concise framework to link metal oxide application options within energy, environmental and economic sustainability, exploring the footprint analysis as well.

Fabrication, characterization, and application of ternary magnetic recyclable Bi2WO6/BiOI@Fe3O4 composite for photodegradation of tetracycline in aqueous solutions

We aim at fabricating a ternary magnetic recyclable Bi₂WO₆/BiOI@Fe₃O₄ composite that could be applied for photodegradation of tetracycline (TC) from synthetic wastewater. To identify any changes with respect to the composite's morphology and crystal structure properties, ΧRD, FTIR, FESEM-EDS, PL and VSM analyses are carried out. The effects of Fe₃O₄ loading ratio on the Bi₂WO₆/BiOI for TC photodegradation are evaluated, while operational parameters such as pH, reaction time, TC concentration, and photocatalyst's dose are optimized. Removal mechanisms of the TC by the composite and its photodegradation pathways are elaborated. With respect to its performance, under the same optimized conditions (1 g/L of dose; 5 mg/L of TC; pH 7; 3 h of reaction time), the Bi₂WO₆/BiOI@5%Fe₃O₄ composite has the highest TC removal (97%), as compared to the Bi₂WO₆ (63%). After being saturated, the spent photocatalyst could be magnetically separated from solution for subsequent use. In spite of three consecutive cycles with 71% of efficiency, the spent composite still has reasonable photocatalytic activities for reuse. Overall, this suggests that the composite is a promising photocatalyst for TC removal from aqueous solutions.

Synthesis of Magnetic Fe3O4/ZnWO4 and Fe3O4/ZnWO4/CeVO4 Nanoparticles: The Photocatalytic Effects on Organic Pollutants upon Irradiation with UV-Vis Light

Magnetic Fe3O4/ZnWO4 and Fe3O4/ZnWO4/CeVO4 nanoparticles with different molar ratios of CeVO4 to other inorganic components were synthesized through co-precipitation with a sonochemical-assisted method. X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, vibrating sample magnetometry, and scanning electron microscopy (SEM) methods were used for the physico–chemical characterization of the obtained nanoparticles. As shown in the SEM images, the average sizes of the Fe3O4/ZnWO4 and Fe3O4/ZnWO4/CeVO4 nanoparticles that formed aggregates were approximately 50–70 nm and 80–100 nm, respectively. The photocatalytic performance of these nanoparticles was examined by measuring methylene blue degradation under visible light (assisted by H2O2). The sample with a mass ratio of 1:2:1 (Fe3O4/ZnWO4/CeVO4, S4) exhibited optimal photocatalytic performance, and thus this sample was subsequently used for the photodegradation of different organic pollutants upon irradiation with ultraviolet (UV) and visible light. Approximately 90% and 70% degradation of methyl violet and methylene blue, respectively, was observed after visible light irradiation. Additionally, the mechanism of the photocatalytic reaction was investigated by measuring ˙OH release under UV light in a system with terephthalic acid and by measuring the release of ˙O2−, ˙OH, and hole scavengers.

Magnetite-based catalysts for wastewater treatment

The increasing number and concentration of organic pollutants in water stream could become a serious threat in the near future. Magnetite has the potential to degrade pollutants via photocatalysis with a convenient separation process. This study discusses in detail the control size and morphology of magnetite nanoparticles, and their composites with co-precipitation, hydrothermal, sol-gel, and electrochemical route. Further photocatalytic enhancement with the addition of metal and porous support was proposed. This paper also discussed the technology to extend the lifetime of recombination through an in-depth explanation of charge transfer. The possibility to use waste materials as catalyst support was also elucidated. However, magnetite-based photocatalysts still require many improvements to meet commercialization criteria.

In situ synthesis of crystalline Ag–WO3 nanosheets with enhanced solar photo-electrochemical performance for splitting water

The evolution mechanisms of morphology and crystal structure were studied in the synthesis process of WO₃ nanosheets preferentially exposing the (100) facet. And their photocatalytic performance after doping Ag was evaluated by splitting water.

Pt nanoparticle-coupled WO2.72 nanoplates as multi-enzyme mimetics for colorimetric detection and radical elimination

Nanomaterials that exhibit enzyme-like activity (nanozymes) have attracted significant attention due to their potential for applications in analytical tests and in the biological field. In this study, an enzyme-like nanomaterial is developed by coupling Pt nanoparticles with WO_2.72 (Pt/WO_2.72). The resultant nanocomposite nanomaterial exhibits peroxidase activity and catalase activity. Moreover, owing to the presence of W⁶⁺ and W⁵⁺ in WO_2.72, Pt/WO_2.72 nanoplates demonstrate promise as scavengers of hydroxyl radicals. The Pt/WO_2.72 composite nanoplates exhibit excellent peroxidase-like activity for the sensitive colorimetric detection of H₂O₂ and blood glucose. These Pt/WO_2.72 nanoplates are thought to be a promising tool for broad potential applications in biomedicine, biotechnology, and environmental chemistry. Pt nanoparticles anchored WO_2.72 nanoplates (Pt/WO_2.72) as a multienzyme-like mimetics exhibits peroxidase activity and catalase activity. Furthermore, this composite can be acted scavengers of hydroxyl radicals.

Biodegradable Hollow MoSe2/Fe3O4 Nanospheres as the Photodynamic Therapy-Enhanced Agent for Multimode CT/MR/IR Imaging and Synergistic Antitumor Therapy

Photodynamic therapy (PDT) is considered as one of the most effective cancer treatment strategies because of its minimally invasive and high efficiency. On account of the correlation between PDT and photocatalytic oxidation, the hollow MoSe₂/Fe₃O₄ (MF-2) nanoheterostructure was constructed to enhance PDT as shown in this paper. The size and the hollow structure can be well controlled by the addition of F-127. MoSe₂/Fe₃O₄ reveals the twofold reactive oxygen species (ROS) generation in contrast to the pure MoSe₂, which is ascribed to the effective separation of photogenic charges. The novel hollow structure also supplies a lot of cavities for perfluorocarbon (PFC) and O₂ loading, and O₂@PFC@MF-2 can effectively overcome the hypoxic microenvironment to further cause more than 3 times ROS production. Moreover, the narrow band gap and hollow structure also make sure that the strong near-infrared (NIR) light absorption and high photothermal conversion efficiency is as high as 66.2%. Furthermore, the combination of Fe₃O₄ can further accelerate the effective biodegradation capacity of MF-2 because of the repeated endogenous redox reaction to form water-soluble Mo^VI-oxide species. Meanwhile, doxorubicin (Dox, anticancer drug) was assembled onto the MF-2@PEG nanomaterials through π-π staking and electrostatic interaction for chemotherapy. O₂@PFC@MF-2@PEG/Dox possesses the potential application in triple-model computed tomography, magnetic resonance, and infrared (CT/MR/IR) imaging-guided photothermal/photodynamic/chemotherapy (PTT/PDT/chemotherapy) nanodiagnosis platforms.

Visible-Light-Driven Janus Microvehicles in Biological Media

A light-driven multifunctional Janus micromotor for the removal of bacterial endotoxins and heavy metals is described. The micromotor was assembled by using the biocompatible polymer polycaprolactone for the encapsulation of CdTe or CdSe@ZnS quantum dots (QDs) as photoactive materials and an asymmetric Fe₃ O₄ patch for propulsion. The micromotors can be activated with visible light (470-490 nm) to propel in peroxide or glucose media by a diffusiophoretic mechanism. Efficient propulsion was observed for the first time in complex samples such as human blood serum. These properties were exploited for efficient endotoxin removal using lipopolysaccharides from Escherichia coli O111:B4 as a model toxin. The micromotors were also used for mercury removal by cationic exchange with the CdSe@ZnS core-shell QDs. Cytotoxicity assays in HeLa cell lines demonstrated the high biocompatibility of the micromotors for future detoxification applications.

Hierarchical Metal-Organic Frameworks with Macroporosity: Synthesis, Achievements, and Challenges

Introduction of multiple pore size regimes into metal-organic frameworks (MOFs) to form hierarchical porous structures can lead to improved performance of the material in various applications. In many cases, where interactions with bulky molecules are involved, enlarging the pore size of typically microporous MOF adsorbents or MOF catalysts is crucial for enhancing both mass transfer and molecular accessibility. In this review, we examine the range of synthetic strategies which have been reported thus far to prepare hierarchical MOFs or MOF composites with added macroporosity. These fabrication techniques can be either pre- or post-synthetic and include using hard or soft structural template agents, defect formation, routes involving supercritical CO2, and 3D printing. We also discuss potential applications and some of the challenges involved with current techniques, which must be addressed if any of these approaches are to be taken forward for industrial applications.

Exchange-biased hybrid γ-Fe2O3/NiO core-shell nanostructures: three-step synthesis, microstructure, and magnetic properties

A two-step solvothermal method combining a calcination process was conducted to synthesize γ-Fe2O3/NiO core-shell nanostructures with controlled microstructure. The formation mechanism of this binary system has been discussed, and the influence of microstructures on magnetic properties has been analyzed in detail. Microstructural characterizations reveal that the NiO shells consisted of many irregular nanosheets with disordered orientations and monocrystalline structures, packed on the surface of the γ-Fe2O3 microspheres. Both the grain size and NiO content of nanostructures increase with the increasing calcination temperature from 300 °C to 400 °C, accompanied by an enhancement of the compactness of NiO shells. Magnetic studies indicate that their magnetic properties are determined by four factors: the size effect, NiO phase content, interface microstructure, i.e. contact mode, area, roughness and compactness, and FM-AFM (where FM and AFM denote the ferromagnetic γ-Fe2O3 and the antiferromagnetic NiO components, respectively) coupling effect. At 5 K, the γ-Fe2O3/NiO core-shell nanostructures display certain exchange bias (HE = 60 Oe) and enhanced coercivity (HC = 213 Oe).

Facile construction of reduced graphene oxide supported three-dimensional polyaniline/WO2.72 nanobelt-flower as a full solar spectrum light response catalyst for efficient photocatalytic conversion of bromate

As a carcinogenic byproduct in drinking water treatment, bromate has raised global concerns on environmental and health hazard, calling for effective treatments. In the current work, a novel reduced graphene oxide supported polyaniline/WO_2.72 nanobelt-flower (RGO/PANI/WO_2.72) ternary composite was prepared through a solvent volatilization method for photocatalytic reduction of bromate. The prepared sample was characterized, and the influence of aqueous pH, ions and dissolved oxygen on the bromate reduction was explored. As expected, the introduction of RGO and PANI on the WO_2.72 exhibited great synergistic effects on the separation of photogenerated carriers. The calculated reduction rate constant of RGO/PANI/WO_2.72 was about six times as high as that of pure WO_2.72. Specially, the prepared photocatalyst possessed strong optical absorption in a broad range of 250-2500 nm, and thus displaying excellent catalytic performance in utilization of all solar spectrum energy. Moreover, the RGO/PANI/WO_2.72 exhibited stable photocatalytic activity in cycling test. Considered holistically, the present study offered a valuable approach for rational construction of heterogeneous structure in the development of bromate-catalyzed reduction.

Novel magnetically separable of Fe3O4/Ag3PO4@WO3 nanocomposites for enhanced photocatalytic and antibacterial activity against Staphylococcus aureus (S. aureus)

BACKGROUND

Iron oxide nanocomposites have received a great attention for their application in various fields like physics, medicine, biology, and material science etc., due to their unique properties, such as magnetism, electrical properties, small size, biocompatibility and low toxicity.

METHODS

Fe3O4/Ag3PO4@WO3 nanocomposites with different weight percent of Ag3PO4 were successfully prepared through fabricated Ag3PO4/Fe3O4 with WO3 via in situ fabrication method, electrospinning involved precursor solution preparation and spinning to enhance photocatalyst performance under simulated sunlight for the degradation of methylene blue (MB) and antibacterial activity against Staphylococcus aureus (S. aureus).

RESULTS

The photocatalytic degradation of methylene blue (MB) under simulated light irradiation indicated that the nanocomposite with 0.25 mg of Ag3PO4 has the best activity. An additional advantage of these photocatalysts is magnetic recoverability, using external magnetic field and photocatalytic stability of the nanocomposites was evaluated for three cycles. In addition, using different scavengers, holes (h+) and superoxide radical (O 2 ·-) radicals and hydroxide radical (·OH) were identified the main oxidative species in the degradation reaction of methylene blue.

CONCLUSIONS

The results reveal that Fe3O4/Ag3PO4@WO3-0.25 nanocomposites have photocatalytic and antibacterial activity against S. aureus. The photocatalyst and mechanism based on the enhancement of electron transfer processes between Ag3PO4 and WO3 nanoparticles.

Advanced oxidation and adsorptive bubble separation of dyes using MnO2-coated Fe3O4 nanocomposite

In this study, MnO₂-coated Fe₃O₄ nanocomposite (Fe₃O₄@MnO₂) was utilized to decompose H₂O₂ to remove dyes via advanced oxidation processes and adsorptive bubble separation (advanced ABS system). The combination of H₂O₂ and Fe₃O₄@MnO₂ generated bubbles and formed a stable foam layer in the presence of a surfactant; sodium dodecyl sulfate (SDS) or cetyltrimethylammonium chloride (CTAC), separating dye from the solution. On the basis of radical quenching experiments, electron paramagnetic resonance and X-ray photoelectron spectroscopy analyses, it was confirmed that the MnO₂ shell of catalyst was reduced to Mn₂O₃ by H₂O₂, generating radicals and oxygen gas for the removal of dyes. In the advanced ABS system, ∙OH and ¹O₂ were the main radical species and the O₂ concentrations of 0.34 and 0.71 mM were increased in the solution and headspace, respectively. The advanced ABS system demonstrated a high removal efficiency of methylene blue (MB) (99.0%) and the removal rate increased with increasing amounts of components (H₂O₂, catalyst and SDS). Also, the advanced ABS system maintained high removal efficiency of MB at a wide pH range of 3-9. In addition to the anionic surfactant of SDS, CTAC was applied as a cationic surfactant for the advanced ABS of anionic dyes. Lastly, the scale-up system was applied to remediate dye-contaminated river water and industrial wastewater for possible practical applications.

Preparation of reduced graphene oxide nanosheet/FexOy/nitrogen-doped carbon layer aerogel as photo-Fenton catalyst with enhanced degradation activity and reusability

In this manuscript, a novel reduced graphene oxide nanosheet/Fe_xO_y/nitrogen-doped carbon layer (rGS/Fe_xO_y/NCL) aerogel with Fe_xO_y NPs sandwiched between rGS and NCL was prepared via a two-step method. Their catalytic performance was evaluated in a photo-Fenton degradation of rhodamine B. It was found that rGS/Fe_xO_y/NCL aerogel represented higher degradation activity than the sum of rGS/NCL support and Fe_xO_y NPs, suggesting synergistic effect was established between support and reactive species. The degradation activity was investigated on the basis of aerogel usage, Fe_xO_y loading, H₂O₂ dosage, pH value and RhB concentration. To test stability and reusability, leaching experiments, cyclic experiments and structural analysis were carried out. Based on inhibitor experiment and intermediate detection, a possible catalytic mechanism and degradation pathway of RhB were proposed.

Controllable synthesis of 3D Fe3O4 micro-cubes as anode materials for lithium ion batteries

In this study, we adopt a facile two-step annealing strategy to synthesize different structural 3D Fe₂O₃ micro-cubes and 3D Fe₃O₄ micro-cubes using Prussian blue (PB) as a precursor.

Synthesis of magnetic biomass carbon-based Bi2O3 photocatalyst and mechanism insight by a facile microwave and deposition method

The as-synthesised Fe₃O₄@Bi₂O₃/C significantly inhibited the recombination of electron–hole pairs and improved the tetracycline degradation efficiency.

Preparation and application of α-Fe2O3@MIL-101(Cr)@TiO2 based on metal–organic framework for photocatalytic degradation of paraquat

In this study, a new magnetic α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst was successfully synthesized. The material synthesized had been fully characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, transmission electron microscopy, and Brunauer–Emmett–Teller isotherm methods. The X-ray diffraction analysis corroborates that nanoparticles are polycrystalline with rhombohedral and tetragonal crystal structures for Fe2O3 and TiO2, respectively. In addition, the photocatalytic degradation of the herbicide paraquat in the presence of α-Fe2O3@MIL-101(Cr)@TiO2 under ultraviolet (UV) irradiation was studied. The effect of experimental parameters such as the initial concentration of catalyst, the pH, and the initial paraquat was investigated. The optimal conditions were achieved for concentration of catalyst 0.2 g L−1, pH 7, and concentration of paraquat 20 mg L−1. The photocatalytic degradation efficiency was 88.39% after 15 min with α-Fe2O3@MIL-101(Cr)@TiO2 under UV irradiation. The pseudo-second-order kinetic model for photocatalytic degradation of paraquat was obtained. The catalysts could be recovered and reused without any loss of efficiency for five times in the consequent reactions. To the best of our knowledge, this is the first report on the photocatalytic degradation of paraquat using new α-Fe2O3@MIL-101(Cr)@TiO2 photocatalyst under UV irradiation condition.