Selective dehydrogenation of ammonia borane to borazine and derivatives by rhodium olefin complexes

This report presents a selective synthetic approach towards borazine from ammonia borane using a dinuclear rhodium olefin homogeneous catalyst. The synthesis and spectroscopic characterization of a dirhodium ammonia borane complex as an intermediate provides insight into a possible mode of activation.

Selective dehydrogenation of ammonia borane to polycondensated BN rings catalysed by ruthenium olefin complexes

Dehydrogenation of ammonia borane to well-defined products is an important but challenging reaction. A dinuclear ruthenium complex with a Ru-Ru bond bearing a diazadiene (dad) unit and olefins as non-innocent ligands catalyzes the highly selective formation of conjugated polycondensed borazine oligomers (BxNxHy), predominantly B21N21H18, the BN analogue of superbenzene.

Titanium-Catalyzed Polymerization of a Lewis Base-Stabilized Phosphinoborane

The reaction of the Lewis base-stabilized phosphinoborane monomer tBuHPBH2 NMe3 (2 a) with catalytic amounts of bis(η5 :η1 -adamantylidenepentafulvene)titanium (1) provides a convenient new route to the polyphosphinoborane [tBuPH-BH2 ]n (3 a). This method offers access to high molar mass materials under mild conditions and with short reaction times (20 °C, 1 h in toluene). It represents an unprecedented example of a transition metal-mediated polymerization of a Lewis base-stabilized Group 13/15 compound. Preliminary studies of the substrate scope and a potential mechanism are reported.

Substrate-Gated Transformation of a Pre-Catalyst into an Iron-Hydride Intermediate [(NO)2(CO)Fe(μ-H)Fe(CO)(NO)2]- for Catalytic Dehydrogenation of Dimethylamine Borane

Continued efforts are made on the development of earth-abundant metal catalysts for dehydrogenation/hydrolysis of amine boranes. In this study, complex [K-18-crown-6-ether][(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂] (3-K-crown, ^MePyr = 3-methylpyrazolate) was explored as a pre-catalyst for the dehydrogenation of dimethylamine borane (DMAB). Upon evolution of H_2(g) from DMAB triggered by 3-K-crown, parallel conversion of 3-K-crown into [(NO)₂Fe(N,N'-^MePyrBH₂NMe₂)]^- (5) and an iron-hydride intermediate [(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂]^- (A) was evidenced by X-ray diffraction/nuclear magnetic resonance/infrared/nuclear resonance vibrational spectroscopy experiments and supported by density functional theory calculations. Subsequent transformation of A into complex [(NO)₂Fe(μ-CO)₂Fe(NO)₂]^- (6) is synchronized with the deactivated generation of H_2(g). Through reaction of complex [Na-18-crown-6-ether][(NO)₂Fe(η²-BH₄)] (4-Na-crown) with CO_(g) as an alternative synthetic route, isolated intermediate [Na-18-crown-6-ether][(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂] (A-Na-crown) featuring catalytic reactivity toward dehydrogenation of DMAB supports a substrate-gated transformation of a pre-catalyst [(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂]^- (3) into the iron-hydride species A as an intermediate during the generation of H_2(g).

Mechanistic insights into H3B·NMeH2 dehydrogenation by Co-based complexes: a DFT perspective

Mechanistic insights into Co-catalyzed H3B·NMeH2 dehydrogenation and polyaminoborane formation are carefully investigated using density functional theory.

Synthesis of Electrophiles Derived from Dimeric Aminoboranes and Assessing Their Utility in the Borylation of π Nucleophiles

Dimeric aminoboranes, [H₂BNR₂]₂ (R = Me or CH₂CH₂) containing B₂N₂ cores, can be activated by I₂, HNTf₂ (NTf₂ = [N(SO₂CF₃)₂]), or [Ph₃C][B(C₆F₅)₄] to form isolable H₂B(μ-NR₂)₂BHX (for X = I or NTf₂). For X = [B(C₆F₅)₄]⁻ further reactivity, presumably between [H₂B(μ-NMe₂)₂BH][B(C₆F₅)₄] and aminoborane, forms a B₃N₃-based monocation containing a three-center two electron B-(μ-H)-B moiety. The structures of H₂B(μ-NMe₂)₂BH(I) and [(μ-NMe₂)BH(NTf₂)]₂ indicated a sterically crowded environment around boron, and this leads to the less common O-bound mode of NTf₂ binding. While the iodide congener reacted very slowly with alkynes, the NTf₂ analogues were more reactive, with hydroboration of internal alkynes forming (vinyl)₂BNR₂ species and R₂NBH(NTf₂) as the major products. Further studies indicated that the B₂N₂ core is maintained during the first hydroboration, and that it is during subsequent steps that B₂N₂ dissociation occurs. In the mono-boron systems, for example, ⁱPr₂NBH(NTf₂), NTf₂ is N-bound; thus, they have less steric crowding around boron relative to the B₂N₂ systems. Notably, the monoboron systems are much less reactive in alkyne hydroboration than the B₂N₂-based bis-boranes, despite the former being three coordinate at boron while the latter are four coordinate at boron. Finally, these B₂N₂ electrophiles are much more prone to dissociate into mono-borane species than pyrazabole [H₂B(μ-N₂C₃H₃)]₂ analogues, making them less useful for the directed diborylation of a single substrate.

Synthesis and Reactions of Borazines

Given the wide array of current applications of borazine-based materials, synthetic access to these compounds is of importance. This review summarizes the many ways of preparing borazines and its carbo-substituted analogues. In addition, the functionalization of borazines is covered. The synthesis of molecules incorporating more than one borazine units as well as aspects of unsymmetrically substituted borazines are not included. The literature has been covered comprehensively until the end of 2020.

1 Introduction: Structure and Properties of Borazine

2 Synthesis of Parent Borazine

3 Synthesis of N-Substituted Borazines

4 Synthesis of B-Halo/B-Halo-N-Substituted Borazines

5 Synthesis of B-Substituted Borazines

6 Synthesis of Polycyclic Borazines Containing One Borazine Ring

7 Modifications or Hydrolysis of the Borazine Ring

8 Borazine Metal Complexes

9 Outlook and Conclusion

Dehydrogenation of iron amido-borane and resaturation of the imino-borane complex

We report on the first isolation and structural characterization of an iron phosphinoimino-borane complex Cp*Fe(η²-H₂B Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> NC₆H₄PPh₂) by dehydrogenation of iron amido-borane precursor Cp*Fe(η¹-H₃B–NHC₆H₄PPh₂). Significantly, regeneration of the amido-borane complex has been realized by protonation of the iron(ii) imino-borane to the amino-borane intermediate [Cp*Fe(η²-H₂B–NHC₆H₄PPh₂)]⁺ followed by hydride transfer. These new iron species are efficient catalysts for 1,2-selective transfer hydrogenation of quinolines with ammonia borane.

Dehydrogenation of an amido-borane iron complex provides an imino-borane complex. Regeneration of the amido-borane precursor was achieved by protonation of the imino-borane followed by hydride transfer to the amino-borane intermediate.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Dehydropolymerisation of Methylamine Borane and an N-Substituted Primary Amine Borane Using a PNP Fe Catalyst

Dehydropolymerisation of methylamine borane (H3 B⋅NMeH2 ) using the well-known iron amido complex [(PNP)Fe(H)(CO)] (PNP=N(CH2 CH2 PiPr2 )2 ) (1) gives poly(aminoborane)s by a chain-growth mechanism. In toluene, rapid dehydrogenation of H3 B⋅NMeH2 following first-order behaviour as a limiting case of a more general underlying Michaelis-Menten kinetics is observed, forming aminoborane H2 B=NMeH, which selectively couples to give high-molecular-weight poly(aminoborane)s (H2 BNMeH)n and only traces of borazine (HBNMe)3 by depolymerisation after full conversion. Based on a series of comparative experiments using structurally related Fe catalysts and dimethylamine borane (H3 B⋅NMe2 H) polymer formation is proposed to occur by nucleophilic chain growth as reported earlier computationally and experimentally. A silyl functionalised primary borane H3 B⋅N(CH2 SiMe3 )H2 was studied in homo- and co-dehydropolymerisation reactions to give the first examples for Si containing poly(aminoborane)s.

A novel highly active and reusable carbon based platinum-ruthenium nanocatalyst for dimethylamine-borane dehydrogenation in water at room conditions

In this paper, we present platinum/ruthenium nanoparticles supported on Vulcan carbon (PtRu@VC) as a nanocatalyst for the dehydrogenation of dimethylamine-borane (DMAB) in aqueous solution under mild conditions. PtRu@VC nanocatalyst was fabricated using the alcohol-reduction techniques which is a facile and effective method. The prepared PtRu@VC nanocatalyst exhibited a good stabilization and an effective catalytic activity for hydrogen evolution from the DMAB dehydrogenation in water at room temperature. The composition of PtRu@VC nanocatalyst was investigated using different analytical techniques inductively coupled plasma optical emission spectroscopy (ICP-OES), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), powder X-ray diffraction (P-XRD) and X-ray photoelectron spectroscopy (XPS). A monodispersedPt/Ru metals distributions on VC (as supporting material) were revealed by TEM and HR-TEM analyses. The mean particle size of PtRu@VC nanocatalyst was found to be 3.15 ± 0.76 nm. XPS analysis for PtRu@VC nanocatalyst showed that almost Pt-Ru metals were found to be the metallic state. Catalytic experimental results showed that PtRu@VC nanocatalyst has a high catalytic activity with an excellent turn-over frequency (TOF_initial) value of 14926.2 h⁻¹ (248.77 min⁻¹) in the dehydrogenation of DMAB in water at room temperature. Additionally, in the paper, we report some different kinetic data obtained from different experimental parameters of temperature, catalyst and substrate concentrations conducted for DMAB dehydrogenation in water catalyzed with PtRu@VC nanocatalyst.

A Four Coordinated Iron(II)-Digermyl Complex as an Effective Precursor for the Catalytic Dehydrogenation of Ammonia Borane

A coordinatively unsaturated iron(II)-digermyl complex, Fe[Ge(SiMe3)3]2(THF)2 (1), was synthesized in one step by the reaction of FeBr2 with 2 equiv of KGe(SiMe3)3. Complex 1 shows catalytic activity comparable to that of its silicon analogue in reduction reactions. In addition, 1 acts as an effective precursor for the catalytic dehydrogenation of ammonia borane. Catalytically active species can also be generated in situ by simple mixing of the easy-to-handle precursors FeBr2, Ge(SiMe3)4, KOtBu, and phenanthroline.

A Highly Active Bidentate Magnesium Catalyst for Amine-Borane Dehydrocoupling: Kinetic and Mechanistic Studies

A magnesium complex (1) featuring a bidentate aminopyridinato ligand is a remarkably selective catalyst for the dehydrocoupling of amine-boranes. This reaction proceeds to completion with low catalyst loadings (1 mol %) under mild conditions (60 °C), exceeding previously reported s-block systems in terms of selectivity, rate, and turnover number (TON). Mechanistic studies by in situ NMR analysis reveals the reaction to be first order in both catalyst and substrate. A reaction mechanism is proposed to account for these findings, with the high TON of the catalyst attributed to the bidentate nature of the ligand, which allows for reversible deprotonation of the substrate and regeneration of 1 as a stable resting state.

Amine-Borane Dehydropolymerization: Challenges and Opportunities

The dehydropolymerization of amine-boranes, exemplified as H2 RB⋅NR'H2 , to produce polyaminoboranes (HRBNR'H)n that are inorganic analogues of polyolefins with alternating main-chain B-N units, is an area with significant potential, stemming from both fundamental (mechanism, catalyst development, main-group hetero-cross-coupling) and technological (new polymeric materials) opportunities. This Concept article outlines recent advances in the field, covering catalyst development and performance, current mechanistic models, and alternative non-catalytic routes for polymer production. The substrate scope, polymer properties and applications of these exciting materials are also outlined. Challenges and opportunities in the field are suggested, as a way of providing focus for future investigations.

Amine-Borane Dehydrogenation and Transfer Hydrogenation Catalyzed by α-Diimine Cobaltates

Anionic α-diimine cobalt complexes, such as [K(thf)_1.5 {(^Dipp BIAN)Co(η⁴ -cod)}] (1; Dipp=2,6-diisopropylphenyl, cod=1,5-cyclooctadiene), catalyze the dehydrogenation of several amine-boranes. Based on the excellent catalytic properties, an especially effective transfer hydrogenation protocol for challenging olefins, imines, and N-heteroarenes was developed. NH₃ BH₃ was used as a dihydrogen surrogate, which transferred up to two equivalents of H₂ per NH₃ BH₃ . Detailed spectroscopic and mechanistic studies are presented, which document the rate determination by acidic protons in the amine-borane.

Dehydropolymerisation of methylamine borane using a dinuclear 1,3-allenediyl bridged zirconocene complex

The dinuclear zirconocene chloride complex 1 is a highly active precatalyst for the dehydropolymerisation of methylamine borane. Comparison with mononuclear Zr chlorides and related dinuclear complexes suggests that the nature of the bridging motif is essential for the unique reactivity of 1.

Iron Precatalysts with Bulky Tri(tert-butyl)cyclopentadienyl Ligands for the Dehydrocoupling of Dimethylamine-Borane

In an attempt to prepare new Fe catalysts for the dehydrocoupling of amine-boranes and to provide mechanistic insight, the paramagnetic Fe^II dimeric complex [Cp'FeI]₂ (1) (Cp'=η⁵ -((1,2,4-tBu)₃ C₅ H₂ )) was used as a precursor to a series of cyclopentadienyl Fe^II and Fe^III mononuclear species. The complexes prepared were [Cp'Fe(η⁶ -Tol)][Cp'FeI₂ ] (2) (Tol=C₆ H₅ Me), [Cp'Fe(η⁶ -Tol)][BAr^F₄ ] (3) (BAr^F₄ =[B(C₆ H₃ (m-CF₃ )₂ )₄ ]^- ), [N(nBu)₄ ][Cp'FeI₂ ] (4), Cp'FeI₂ (5), and [Cp'Fe(MeCN)₃ ][BAr^F₄ ] (6). The electronic structure of the [Cp'FeI₂ ]^- anion in 2 and 4 was investigated by SQUID magnetometry, EPR spectroscopy and ab initio Complete Active Space Self Consistent Field-Spin Orbit (CASSCF-SO) calculations, and the studies revealed a strongly anisotropic S=2 ground state. Complexes 1-6 were investigated as catalysts for the dehydrocoupling of Me₂ NH⋅BH₃ (I) in THF at 20 °C to yield the cyclodiborazane product [Me₂ N-BH₂ ]₂ (IV). Complexes 1-4 and 6 were active dehydrocoupling catalysts towards I (5 mol % loading), however 5 was inactive, and ultra-violet (UV) irradiation was required for the reaction mediated by 3. Complex 6 was found to be the most active precatalyst, reaching 80 % conversion to IV after 19 h at 22 °C. Dehydrocoupling of I by 1-4 proceeded via formation of the aminoborane Me₂ N=BH₂ (II) as the major intermediate, whereas for 6 the linear diborazane Me₂ NH-BH₂ -NMe₂ -BH₃ (III) could be detected, together with trace amounts of II. Reactions of 1 and 6 with Me₃ N⋅BH₃ were investigated in an attempt to identify Fe-based intermediates in the catalytic reactions. The σ-complex [Cp'Fe(MeCN)(κ² -H₂ BH⋅NMe₂ H][BAr^F₄ ] was proposed to initially form in dehydrocoupling reactions involving 6 based on ESI-MS (ESI=Electrospray Ionisation Mass Spectroscopy) and NMR spectroscopic evidence. The latter also suggests that these complexes function as precursors to iron hydrides which may be the true catalytic species.

Step-growth titanium-catalysed dehydropolymerisation of amine-boranes

Precatalysts active for the dehydropolymerisation of primary amine-boranes are generally based on mid or late transition metal. We have found that the activity of the precatalyst system formed from Cp^R₂TiCl₂ and 2nBuLi towards the dehydrogenation of the secondary amine-borane Me₂NH·BH₃, to yield the cyclic diborazane [Me₂N-BH₂]₂, increases dramatically with increasing electron-donating character of the cyclopentadienyl rings (Cp^R). Application of the most active precatalyst system (Cp^R = η-C₅Me₅) to the primary amine-borane MeNH₂·BH₃ enabled the first synthesis of high molar mass poly(N-methylaminoborane), [MeNH-BH₂] _n , the BN analogue of polypropylene, by an early transition metal such as catalyst. Significantly, unlike other dehydropolymerization precatalysts for MeNH₂·BH₃ such as [Ir(POCOP)H₂], skeletal nickel, and [Rh(COD)Cl]₂, the Ti precatalyst system was also active towards a range of substrates including BzNH₂·BH₃ (Bz = benzyl) yielding high molar mass polymer. Moreover, in contrast to the late transition metal catalysed dehydropolymerisation of MeNH₂·BH₃ and also the Ziegler-Natta polymerisation of olefins, studies indicate that the Ti-catalyzed dehydropolymerization reactions proceed by a step-growth rather than a chain-growth mechanism.

Depolymerization of Poly(phosphinoboranes): From Polymers to Lewis Base Stabilized Monomers

We report on depolymerization reactions of poly(phosphinoboranes). The cleavage of the polymers [H₂ PBH₂ ]_n (2 a), [tBuHPBH₂ ]_n (2 c), [PhHPBH₂ ]_n (2 e) and the oligomer [Ph₂ PBH₂ ]_n (2 b), with strong Lewis bases (LBs), in particular with NHCs, leads to the corresponding monomeric phosphanylboranes R¹ R² PBH₂ LB. It is observed that the depolymerization depends on the strength and stability of the LBs as well as on the substitution pattern of the poly(phosphinoboranes). The solid state structures of the monomeric phosphinoboranes H₂ PBH₂ NHC^Me (NHC=N-heterocyclic carbene) (4 a), H₂ PBH₂ NHC^dipp (5 a) and tBuHPBH₂ NHC^Me (4 c) were determined. DFT calculations support the experimentally observed reaction behavior.

Iron Catalyzed Dehydrocoupling of Amine- and Phosphine-Boranes

Catalytic dehydrocoupling methodologies, whereby dihydrogen is released from a substrate (or intermolecularly from two substrates) is a mild and efficient method to construct main group element-main group element bonds, the products of which can be used in advanced materials, and also for the development of hydrogen storage materials. With growing interest in the potential of compounds such as ammonia-borane to act as hydrogen storage materials which contain a high weight% of H2, along with the current heightened interest in base metal catalyzed processes, this review covers recent developments in amine and phosphine dehydrocoupling catalyzed by iron complexes. The complexes employed, products formed and mechanistic proposals will be discussed.

Non-Metal-Catalyzed Heterodehydrocoupling of Phosphines and Hydrosilanes: Mechanistic Studies of B(C6F5)3-Mediated Formation of P-Si Bonds

Non-metal-catalyzed heterodehydrocoupling of primary and secondary phosphines (R¹R²PH, R² = H or R¹) with hydrosilanes (R³R⁴R⁵SiH, R⁴, R⁵ = H or R³) to produce synthetically useful silylphosphines (R¹R²P-SiR³R⁴R⁵) has been achieved using B(C₆F₅)₃ as the catalyst (10 mol %, 100 °C). Kinetic studies demonstrated that the reaction is first-order in hydrosilane and B(C₆F₅)₃ but zero-order in phosphine. Control experiments, DFT calculations, and DOSY NMR studies suggest that a R¹R²HP·B(C₆F₅)₃ adduct is initially formed and undergoes partial dissociation to form an "encounter complex". The latter mediates frustrated Lewis pair type Si-H bond activation of the silane substrates. We also found that B(C₆F₅)₃ catalyzes the homodehydrocoupling of primary phosphines to form cyclic phosphine rings and the first example of a non-metal-catalyzed hydrosilylation of P-P bonds to produce silylphosphines (R¹R²P-SiR³R⁴R⁵). Moreover, the introduction of PhCN to the reactions involving secondary phosphines with hydrosilanes allowed the heterodehydrocoupling reaction to proceed efficiently under much milder conditions (1.0 mol % B(C₆F₅)₃ at 25 °C). Mechanistic studies, as well as DFT calculations, revealed that PhCN plays a key mechanistic role in facilitating the dehydrocoupling reactions rather than simply functioning as H₂-acceptor.

Characterization of a Borane σ Complex of a Diiron Dithiolate: Model for an Elusive Dihydrogen Adduct

The azadithiolate complex Fe₂[(SCH₂)₂₆NMe](CO)₆ reacts with borane to give an initial 1:1 adduct, which spontaneously decarbonylates to give Fe₂[(SCH₂)₂NMeBH₃](CO)₅. Featuring a Fe-H-B three-center, two-electron interaction, the pentacarbonyl complex is a structural model for H₂ complexes invoked in the [FeFe]-hydrogenases. The pentacarbonyl compound is a "σ complex", where a B-H σ bond serves as a ligand for iron. The structure of this σ complex was characterized by variable-temperature NMR spectroscopy and X-ray crystallography. Complementary to the 1:1 borane adduct is the quaternary ammonium complex [Fe₂](SCH₂)₂NMe₂](CO)₆]⁺, which was also characterized. It represents a kinetically robust analogue of the N-protonated amine cofactor, as indicated by its mild reduction potential.

Ruthenium-Catalyzed Ammonia Borane Dehydrogenation: Mechanism and Utility

One of the greatest challenges in using H₂ as a fuel source is finding a safe, efficient, and inexpensive method for its storage. Ammonia borane (AB) is a solid hydrogen storage material that has garnered attention for its high hydrogen weight density (19.6 wt %) and ease of handling and transport. Hydrogen release from ammonia borane is mediated by either hydrolysis, thus giving borate products that are difficult to rereduce, or direct dehydrogenation. Catalytic AB dehydrogenation has thus been a popular topic in recent years, motivated both by applications in hydrogen storage and main group synthetic chemistry. This Account is a complete description of work from our laboratory in ruthenium-catalyzed ammonia borane dehydrogenation over the last 6 years, beginning with the Shvo catalyst and resulting ultimately in the development of optimized, leading catalysts for efficient hydrogen release. We have studied AB dehydrogenation with Shvo's catalyst extensively and generated a detailed understanding of the role that borazine, a dehydrogenation product, plays in the reaction: it is a poison for both Shvo's catalyst and PEM fuel cells. Through independent syntheses of Shvo derivatives, we found a protective mechanism wherein catalyst deactivation by borazine is prevented by coordination of a ligand that might otherwise be a catalytic poison. These studies showed how a bidentate N-N ligand can transform the Shvo into a more reactive species for AB dehydrogenation that minimizes accumulation of borazine. Simultaneously, we designed novel ruthenium catalysts that contain a Lewis acidic boron to replace the Shvo -OH proton, thus offering more flexibility to optimize hydrogen release and take on more general problems in hydride abstraction. Our scorpionate-ligated ruthenium species (12) is a best-of-class catalyst for homogeneous dehydrogenation of ammonia borane in terms of its extent of hydrogen release (4.6 wt %), air tolerance, and reusability. Moreover, a synthetically simplified ruthenium complex supported by the inexpensive bis(pyrazolyl)borate ligand is a comparably good catalyst for AB dehydrogenation, among other reactions. In this Account, we present a detailed, concise description of how our work with the Shvo system progressed to the development of our very reactive and flexible dual-site boron-ruthenium catalysts.

Formation of high-molecular weight polyaminoborane by Fe hydride catalysed dehydrocoupling of methylamine borane

The complex [(PNHP)Fe(H)(CO)(HBH₃)] (PNHP = HN(CH₂CH₂Pi-Pr₂)₂) serves as a catalyst precursor for the selective dehydrocoupling of methylamine borane at room temperature, tentatively via an off-metal polymerisation pathway.

Iron-catalyzed dehydrogenation reactions and their applications in sustainable energy and catalysis

This review article describes recent developments of iron-based acceptorless dehydrogenation (AD) reactions of fundamentally important feedstock, as a route to sustainable chemical synthesis and energy storage applications.

Boron–nitrogen main chain analogues of polystyrene: poly(B-aryl)aminoboranes via catalytic dehydrocoupling

High molecular weight B-arylated polyaminoboranes are obtained via catalytic dehydropolymerisation of B-aryl amine–boranes and represent the first inorganic polystyrene analogues with a B–N main chain.

Dehydrogenation of ammonia borane through the third equivalent of hydrogen

Ammonia borane (AB) has high hydrogen density (19.6 wt%), and can, in principle, release up to 3 equivalents of H2 under mild catalytic conditions. A limited number of catalysts are capable of non-hydrolytic dehydrogenation of AB beyond 2 equivalents of H2 under mild conditions, but none of these is shown directly to derivatise borazine, the product formed after 2 equivalents of H2 are released. We present here a high productivity ruthenium-based catalyst for non-hydrolytic AB dehydrogenation that is capable of borazine dehydrogenation, and thus exhibits among the highest H2 productivity reported to date for anhydrous AB dehydrogenation. At 1 mol% loading, (phen)Ru(OAc)2(CO)2 () effects AB dehydrogenation through 2.7 equivalents of H2 at 70 °C, is robust through multiple charges of AB, and is water and air stable. We further demonstrate that catalyst has the ability both to dehydrogenate borazine in isolation and dehydrogenate AB itself. This is important, both because borazine derivatisation is productivity-limiting in AB dehydrogenation and because borazine is a fuel cell poison that is commonly released in H2 production from this medium.