Synthesis and Modification of Silicon Nanosheets and Other Silicon Nanomaterials

Deciphering the Polymorphism of CaSi2: The Influence of Heat and Composition

The Zintl phase CaSi2 is a layered compound with stacking variants known as 1P, 3R, and 6R. We extend the series by the 21R polytype formed by rapid cooling of the melt. The crystal structure of 21R-CaSi2 (space group R3̅m) was derived from HRTEM images, and the atomic positions were optimized by using the FPLO code (a = 3.868 Å, c = 107.276 Å). We explore polytype transformations by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron backscattering diffraction (EBSD), and thermal analysis. While 6R-CaSi2 is thermodynamically stable at ambient conditions, nanosized impurities of silicon stabilize 3R-CaSi2 as a bulk phase.

Exceptional ultrafast nonlinear optical response of functionalized silicon nanosheets

The present work reports on the ultrafast saturable absorption (SA), optical limiting (OL), and the nonlinear refractive response of hydride-terminated silicon nanosheets (SiNS-H) differently functionalized with styrene and tert-butyl methacrylate (tBuMA), namely, SiNS-styrene and SiNS-tBuMA, using 50 fs, 400 nm and 70 fs, 800 nm laser pulses. SiNS-styrene and SiNS-tBuMA exhibit dramatically enhanced nonlinear optical (NLO) responses compared to SiNS-H, with their absorptive nonlinearity strongly dependent on the laser excitation wavelength. More specifically, the studied functionalized SiNSs reveal strong SA behavior under 400 nm laser excitation, with NLO absorption coefficients, saturable intensities, and modulation depths comparable to various two-dimensional (2D) materials, known to exhibit strong SA, such as graphene, black phosphorous (BP), some transition metal dichalcogenides (TMDs), and some MXenes. On the other hand, under 800 nm laser excitation, SiNS-styrene and SiNS-tBuMA show highly efficient OL performance with OL onset values of about 0.0045 and 0.0065 J cm-2, respectively, which are significantly lower than those of other 2D nanostructures. In addition, it is shown that both SiNS samples have great potential in already existing Si-based optoelectronic devices for optical-switching applications since they exhibit very strong NLO refraction comparable to that of bulk Si. The results of the present work demonstrate that the chemical functionalization of SiNSs provides a highly efficient strategy for the preparation of 2D Si-based nanostructures with enhanced NLO response in view of several optoelectronic and photonic applications, such as OL, SA, and all-optical switching.

Solid Silicon Nanosheet Sandwiched by Self-Assembled Honeycomb Silicon Nanosheets Enabling Long Life at High Current Density for a Lithium-Ion Battery Anode

A two-dimensional silicon nanosheet (2D Si NS) is promising as a lithium-ion battery anode. However, insufficient cycling life at high current density hampers its practical applications due to its easy fragileness. Rationally engineering the Si micro/nanostructure is promising to address this issue. Unfortunately, the precise construction of a dedicated micro/nanostructure into 2D Si NS meets serious challenges. Herein, a facile strategy is developed to synthesize a sandwich-like honeycomb Si NS/solid Si NS/honeycomb Si NS (h/s/h-Si NS) anode through self-assembled preparation of a sandwich-like honeycomb SiO₂ NS/solid SiO₂ NS/honeycomb SiO₂ NS template, followed by magnesiothermic reduction. This unique structure effectively enhances the mechanical strength, enlarges the specific surface area, and reserves sufficient space to accommodate the anode volume change. A conductive carbon layer is further coated on the h/s/h-Si NS (h/s/h-Si@C NS) to construct a stable electrode/electrolyte interface. The optimal h/s/h-Si@C NS displays outstanding performance with high initial Coulombic efficiency (86%), high reversible capacity (1624 mAh g^-1 after 100 cycles at 1000 mA g^-1), good rate capability (over 1000 mAh g^-1 at 4000 mA g^-1), and long cycling life even at 4000 mA g^-1 (93% retained capacity after 1000 cycles). This work provides a new strategy for constructing high-performance Si electrodes for lithium-ion battery applications.

An analysis of Schottky barrier in silicene/Ga2SeS heterostructures by employing electric field and strain

Two-dimensional materials are leading the way in nanodevice applications thanks to their various advantages. Although two-dimensional materials show promise for many applications, they have certain limitations. In the last decade, the increasing demand for the applications of novel two-dimensional materials has accelerated heterostructure studies in this field. Hence, restoring the combination of two-dimensional heterostructured materials has been reported. In this paper, we show that the effect of the external electric field and biaxial strain on the silicene/Ga₂SeS heterostructure has a critical impact on the tuning of the Schottky barrier height. The findings such as the variation of the electronic band gap, interlayer charge transfer, total dipole moment, and n-type/p-type Schottky barrier transitions of the silicene/Ga₂SeS heterostructure under external effects imply that the device performance can be adjusted with Janus 2D materials.

[Cl@Si20H20]-: Parent Siladodecahedrane with Endohedral Chloride Ion

Fullerenes and diamondoids are at the core of nanoscience. Comparable monodisperse silicon analogues are scarce. Herein, we report the synthesis of the parent siladodecahedrane, which represents the largest Platonic solid. It shares its pattern of pentagonal faces with the smallest fullerene, C₂₀, and its saturated, H-terminated skeleton with diamondoids. Similar to endofullerenes, the silicon cage encapsulates a chloride ion ([Cl@Si₂₀H₂₀]^-); similar to diamondoids, its Si-H termini offer a wealth of opportunities for further functionalization. Mere treatment with chloromethanes leads to the perchlorinated cluster [Cl@Si₂₀Cl₂₀]^-. Both compounds were characterized by mass spectrometry, X-ray crystallography, NMR spectroscopy, and quantum-chemical calculations. The experimentally determined ³⁵Cl resonances of the endohedral chloride ions are particularly diagnostic to probe the Cl^- → Si₂₀ interaction strength as a function of the different surface substituents, as we have proven by high-level computational analyses.

Layered silicon carbide: a novel anode material for lithium ion batteries

The structural stability of carbon and the high theoretical capacity of silicon was the motivation for investigating the prospects of layered silicon carbide (SiC).

Intercalation and flexibility chemistries of soft layered materials

Layered materials, alternate stackings of two or more components, are found in a wide range of scales. Chemists can design and synthesize layered structures containing functional units. The soft-type layered materials exhibit characteristic dynamic functions originating from two-dimensional (2D) anisotropy and structure flexibility. This feature article focuses on "intercalation" and "flexibility" as two new perspectives for designing soft layered materials. Intercalation of guests is a characteristic approach for design of layered structures. Flexibility is an important factor to control the dynamic functions of the layered structures. As a model case, the intercalation-induced tunable stimuli-responsive color-change properties of layered polydiacetylene (PDA) are introduced to study the impact of the intercalation and flexibility on the dynamic functions. Recently, layered materials have drastically expanded the research area from conventional rigid inorganic compounds to new self-assembled nanostructures consisting of organic components, such as polymers, metal-organic frameworks, and covalent-organic frameworks. These new layered architectures have potentials for exhibiting dynamic functions originating from the structure flexibility beyond the static properties originating from classical intercalation and host-guest chemistries. Therefore, intercalation and flexibility chemistries of soft layered materials are regarded as new perspectives for design of advanced dynamic functional materials.

Flash Solid-Solid Synthesis of Silicon Oxide Nanorods

1D silicon-based nanomaterials, renowned for their unique chemical and physical properties, have enabled the development of numerous advanced materials and biomedical technologies. Their production often necessitates complex and expensive equipment, requires hazardous precursors and demanding experimental conditions, and involves lengthy processes. Herein, a flash solid-solid (FSS) process is presented for the synthesis of silicon oxide nanorods completed within seconds. The innovative features of this FSS process include its simplicity, speed, and exclusive use of solid precursors, comprising hydrogen-terminated silicon nanosheets and a metal nitrate catalyst. Advanced electron microscopy and X-ray spectroscopy analyses favor a solid-liquid-solid reaction pathway for the growth of the silicon oxide nanorods with vapor-liquid-solid characteristics.

Native Void Space for Maximum Volumetric Capacity in Silicon-Based Anodes

Volumetric energy density is considered a primary factor in developing high-energy batteries. Despite its significance, less efforts have been devoted to its improvement. Silicon-based materials have emerged as next-generation anodes for lithium-ion batteries due to their high specific capacity. However, their volumetric capacities are limited by the volume expansion rate of silicon, which restricts mass loading in the electrodes. To address this challenge, we introduce porous silicon templated from earth-abundant minerals with native internal voids, capable of alleviating volumetric expansion during repeated cycles. In situ transmission electron microscopy analysis allows the precise determination of the expansion rate of silicon, thus presenting an analytical model for finding the optimal content in silicon/graphite composites. The inner pores in silicon reduce problems associated with its expansion and allow higher silicon loading of 42% beyond the conventional limitations of 13-14%. Consequently, the anode designed in this work can deliver a volumetric capacity of 978 mAh cc^-1. Thus, suppressing volume expansion with natural abundant template-assisted materials opens new avenues for cost-effective fabrication of high volumetric capacity batteries.

Silicon nanosheets as co-initiators for diaryliodonium induced radical and cationic polymerization

A system of silicon nanosheets and a diaryliodonium salt was found to initiate cationic and radical polymerizations. The polymerization relies on a syngergistic interaction between the silicon nanomaterial and the diaryliodonium salt, whereby the silicon nanomaterial acts as a co-initiator, inducing the decomposition of the diaryliodonium salt. The decomposition products, in turn, are able to initiate both cationic and radical polymerizations thereby enabling a mild and straightforward reaction procedure to obtain a variety of polymer/nanomaterial composites with cationically and radically polymerizable monomers. Most importantly, this work highlights the potential of using silicon nanomaterials' unique properties not just for physical applications, but also in chemical applications.

Electronic Transport through DNA Nucleotides in Atomically Thin Phosphorene Electrodes for Rapid DNA Sequencing

Rapid progresses in developing the fast, low-cost, and reliable methods for DNA sequencing are envisaged for development of personalized medicine. In this respect, nanotechnology has paved the role for the development of advanced DNA sequencing techniques including sequencing with solid-state nanopores or nanogaps. Herein, we have explored the application of a black phosphorene based nanogap-device for DNA sequencing. Using density-functional-theory based non-equilibrium Green's function approach, we have computed transverse transmission and current-voltage ( I- V) characteristics of all the four DNA nucleotides (deoxy adenosine monophosphate, deoxy guanidine monophosphate, deoxy thymidine monophosphate, and deoxy cytosine monophosphate) as functions of applied bias voltages. We deduce that it is in principle; possible to differentiate between all the four nucleotides by three sequencing runs at distinct applied bias voltages, i.e., at 0.2, 1.4, and 1.6 V, where individual identification of all the four nucleotides may be possible. Hence, we believe our study might be helpful for experimentalist towards the development of a phosphorene based nanodevice for DNA sequencing to diagnose critical diseases.

Pressure-driven phase transitions and reduction of dimensionality in 2D silicon nanosheets

In-situ high-pressure synchrotron X-ray powder diffraction studies up to 21 GPa of CVD-grown silicon 2D-nanosheets establish that the structural phase transitions depend on size and shape. For sizes between 9.3(7) nm and 15.2(8) nm we observe an irreversible phase transition sequence from I (cubic) → II (tetragonal) → V (hexagonal) during pressure increase and during decompression below 8 GPa the emergence of an X-ray amorphous phase. High-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and atomic force microscopy (AFM) images of this X-ray amorphous phase reveal the formation of significant numbers of 1D nanowires with aspect ratios > 10, which are twinned and grow along the <111> direction. We discovered a reduction of dimensionality under pressure from a 2D morphology to a 1D wire in a material with a diamond structure. MD simulations indicate the reduction of thermal conductivity in such nanowires.

Nature of Hexagonal Silicon Forming via High-Pressure Synthesis: Nanostructured Hexagonal 4H Polytype

Hexagonal Si allotropes are expected to enhance light absorption in the visible range as compared to common cubic Si with diamond structure. Therefore, synthesis of these materials is crucial for the development of Si-based optoelectronics. In this work, we combine in situ high-pressure high-temperature synthesis and vacuum heating to obtain hexagonal Si. High pressure is one of the most promising routes to stabilize these allotropes. It allows one to obtain large-volume nanostructured ingots by a sequence of direct solid-solid transformations, ensuring high-purity samples for detailed characterization. Thanks to our synthesis approach, we provide the first evidence of a polycrystalline bulk sample of hexagonal Si. Exhaustive structural analysis, combining fine-powder X-ray and electron diffraction, afforded resolution of the crystal structure. We demonstrate that hexagonal Si obtained by high-pressure synthesis correspond to Si-4H polytype (ABCB stacking) in contrast with Si-2H (AB stacking) proposed previously. This result agrees with prior calculations that predicted a higher stability of the 4H form over 2H form. Further physical characterization, combining experimental data and ab initio calculations, have shown a good agreement with the established structure. Strong photoluminescence emission was observed in the visible region for which we foresee optimistic perspectives for the use of this material in Si-based photovoltaics.

Silicene, silicene derivatives, and their device applications

Silicene, the ultimate scaling of a silicon atomic sheet in a buckled honeycomb lattice, represents a monoelemental class of two-dimensional (2D) materials similar to graphene but with unique potential for a host of exotic electronic properties. Nonetheless, there is a lack of experimental studies largely due to the interplay between material degradation and process portability issues. This review highlights the state-of-the-art experimental progress and future opportunities in the synthesis, characterization, stabilization, processing and experimental device examples of monolayer silicene and its derivatives. The electrostatic characteristics of the Ag-removal silicene field-effect transistor exhibit ambipolar charge transport, corroborating with theoretical predictions on Dirac fermions and Dirac cone in the band structure. The electronic structure of silicene is expected to be sensitive to substrate interaction, surface chemistry, and spin-orbit coupling, holding great promise for a variety of novel applications, such as topological bits, quantum sensing, and energy devices. Moreover, the unique allotropic affinity of silicene with single-crystalline bulk silicon suggests a more direct path for the integration with or revolution to ubiquitous semiconductor technology. Both the materials and process aspects of silicene research also provide transferable knowledge to other Xenes like stanene, germanene, phosphorene, and so forth.

Scalable 2D Mesoporous Silicon Nanosheets for High-Performance Lithium-Ion Battery Anode

Constructing unique mesoporous 2D Si nanostructures to shorten the lithium-ion diffusion pathway, facilitate interfacial charge transfer, and enlarge the electrode-electrolyte interface offers exciting opportunities in future high-performance lithium-ion batteries. However, simultaneous realization of 2D and mesoporous structures for Si material is quite difficult due to its non-van der Waals structure. Here, the coexistence of both mesoporous and 2D ultrathin nanosheets in the Si anodes and considerably high surface area (381.6 m² g^-1 ) are successfully achieved by a scalable and cost-efficient method. After being encapsulated with the homogeneous carbon layer, the Si/C nanocomposite anodes achieve outstanding reversible capacity, high cycle stability, and excellent rate capability. In particular, the reversible capacity reaches 1072.2 mA h g^-1 at 4 A g^-1 even after 500 cycles. The obvious enhancements can be attributed to the synergistic effect between the unique 2D mesoporous nanostructure and carbon capsulation. Furthermore, full-cell evaluations indicate that the unique Si/C nanostructures have a great potential in the next-generation lithium-ion battery. These findings not only greatly improve the electrochemical performances of Si anode, but also shine some light on designing the unique nanomaterials for various energy devices.

Few-layered titanate nanosheets with large lateral size and surface functionalization: potential for the controlled exfoliation of inorganic–organic layered composites

A new straightforward exfoliation method realizes the selective synthesis of few-layered titanate nanosheets with a large lateral size and surface functionalization.

Diaryliodonium salts as hydrosilylation initiators for the surface functionalization of silicon nanomaterials and their collaborative effect as ring opening polymerization initiators

Diaryliodonium salts were found to initiate hydrosilylation reactions on the surface of silicon nanosheets as well as silicon nanocrystals of different sizes. A variety of different functional substrates can be used to stabilize the surface of the photoluminescent materials. Additionally, the combination of hydride terminated silicon nanomaterials with diaryliodonium salts was found to initiate cationic ring opening polymerization, demonstrating the potential of silicon based nanomaterials as coinitiators and enabling a mild, straightforward reaction method.

Optical and magnetic properties of free-standing silicene, germanene and T-graphene system

The physics of two-dimensional (2D) materials is always intriguing in their own right. For all of these elemental 2D materials, a generic characteristic feature is that all the atoms of the materials are exposed on the surface, and thus tuning the structure and physical properties by surface treatments becomes very easy and straightforward. The discovery of graphene have fostered intensive research interest in the field of graphene like 2D materials such as silicene and germanene (hexagonal network of silicon and germanium, respectively). In contrast to the planar graphene lattice, the silicene and germanene honeycomb lattice is slightly buckled and composed of two vertically displaced sublattices.The magnetic properties were studied by introducing mono- and di-vacancy (DV), as well as by doping phosphorus and aluminium into the pristine silicene. It is observed that there is no magnetism in the mono-vacancy system, while there is large significant magnetic moment present for the DV system. The optical anisotropy of four differently shaped silicene nanodisks has revealed that diamond-shaped (DS) silicene nanodisk possesses highest static dielectric constant having no zero-energy states. The study of optical properties in silicene nanosheet network doped by aluminium (Al), phosphorus (P) and aluminium-phosphorus (Al-P) atoms has revealed that unlike graphene, no new electron energy loss spectra (EELS) peak occurs irrespective of doping type for parallel polarization. Tetragonal graphene (T-graphene) having non-equivalent (two kinds) bonds and non-honeycomb structure shows Dirac-like fermions and high Fermi velocity. The higher stability, large dipole moment along with high-intensity Raman active modes are observed in N-doped T-graphene. All these theoretical results may shed light on device fabrication in nano-optoelectronic technology and material characterization techniques in T-graphene, doped silicene, and germanene.

Existence of semi-Dirac cones and symmetry of two-dimensional materials

There have been growing efforts to find new two-dimensional (2D) materials with anisotropic properties due to their potential applications in electronics. Although in such a search, a symmetry based analysis can be useful, it has not been reported so far. Using group theory we have found sufficient conditions for the existence of a linear dispersion in one direction and quadratic one in perpendicular direction, in the vicinity of points of symmetry in the Brillouin zone (BZ) of any non-magnetic, 2D material with negligible spin-orbit coupling. We have formulated a set of symmetry conditions that lead to the semi-Dirac dispersion and analyzed all possible symmetries of 2D materials. In four, out of all eighty symmetry groups, combined time-reversal and crystal symmetry leads, at given points in the BZ, to such dispersion. The result is valid irrespectively of strength of electronic correlations in the system, model used to calculate the band structure, or the actual crystal structure that realizes given groups. We have illustrated our findings using a tight-binding example.

Ordered CaSi2 Microwall Arrays on Si Substrates Induced by the Kirkendall Effect

We have specified the synthetic conditions to obtain one-directionally ordered CaSi₂ microwall arrays vertically grown on a Si substrate. Our basic concept is based on the utilization of the Kirkendall effect for reactive deposition epitaxy (RDE). We found for the first time that: 1) a much larger Ca vapor supply on the Si substrate than the conventional RDE, 2) the adoption of a two-step heating process, and 3) the selection of the crystal axis of the Si surface are the keys to control the microstructures of CaSi₂ on the Si substrate. The CaSi phase was first formed on Si, then the CaSi₂ phase was formed at the CaSi/Si interface. Based on the Kirkendall effect, the interdiffusion of Ca and Si was enhanced in the vertical direction rather than in the parallel direction to the Si surface. CaSi₂ tends to grow along four equivalent Si{111} planes, however, the specific orientation of the Si surface resulted in CaSi₂ microwalls grown along its Si(111‾ ) plane, the only plane directing nearly vertical to the surface among the Si{111} planes. These results suggest that the Kirkendall effect under asymmetric growth of target materials would be a rational strategy to obtain their ordered microstructures.

Elemental two-dimensional nanosheets beyond graphene

The recent progress of elemental two-dimensional nanosheets, beyond graphene, has been summarized with the focus on their preparation and applications.

Topotactic synthesis of the overlooked multilayer silicene intercalation compound SrSi2

Silicene, a 2D honeycomb lattice of Si atoms similar to graphene, is expected to be a platform for nanoelectronics and home to novel quantum phenomena. Unlike graphene, free-standing silicene is notoriously difficult to stabilize, while strong hybridization of silicene with substrates destroys its desirable properties. On the other hand, Dirac cones of silicene are effectively realized in a bulk - stoichiometric ionic multilayer silicene intercalation compound CaSi2. Besides, a number of new 2D silicene-based materials are synthesized employing CaSi2 as a precursor. However, the rather complex atomic structure of CaSi2 and fresh opportunities of physical and chemical breakthroughs drive the search for alternative compounds with silicene networks. Here, a new polymorph of SrSi2 is synthesized, enjoying both the structure of intercalated multilayer silicene and the simplest possible stacking of silicene sheets. The MBE-quality synthesis accomplished on Si(001) and Si(111) surfaces leads to epitaxial films of SrSi2 with orientation controlled by the substrate, as revealed by XRD, RHEED and electron microscopy studies. The structural SrSi2/Si relation is mirrored in the transport properties of the films.

Tuning the band gap of silicene by functionalisation with naphthyl and anthracyl groups

Silicene is a relatively new material consisting of a two-dimensional sheet of silicon atoms. Functionalisation of silicene with different chemical groups has been suggested as a way to tune its electronic properties. In this work, density functional theory calculations and ab initio molecular dynamics simulations are used to examine the effects of functionalisation with naphthyl or anthracyl groups, which are two examples of small polycyclic aromatic hydrocarbons (PAHs). Different attachment positions on the naphthyl and anthracyl groups were compared, as well as different thicknesses of the silicene nanosheet. It was found that the carbon attachment position farthest from the bond fusing the aromatic rings gave the more stable structures for both functional groups. All structures showed direct band gaps, with tuning of the band gap being achievable by increasing the length of the PAH or the thickness of the silicene. Hence, modifying the functional group or thickness of the silicene can both be used to alter the electronic properties of silicene making it a highly promising material for use in future electronic devices and sensors.

Novel Au- and Ge-based two-dimensional materials formed through topotactic transitions of AlB2-like structures

The topotactic reaction of a layered compound, for example CaGe2, with HCl solution is a common and facile method to produce two-dimensional (2D) materials. In this work we demonstrate with first-principles calculations that this technique can potentially lead to a whole new family of 2D materials starting from three-dimensional crystals with AlB2-like structures. As representative cases, we show here that the de-intercalation of Sc and Ca atoms from ScAuGe and Ca2AuGe3 crystals is strongly exothermic and produces the stable 2D monolayers AuGeH and AuGe3H3, respectively. Remarkably, both metals (AuGeH) and semiconductors (AuGe3H3) can be prepared by this method. Based on the broad availability of AlB2-like structures with varying stoichiometries, there are several possibilities to prepare novel functional 2D materials with suitable topotactic transitions.

Surface-functionalized hydrophilic monolayer of titanate and its application for dopamine detection

A surface-functionalized hydrophilic charge-neutral monolayer of titanate was exfoliated from the precursor layered composite in aqueous media without addition of a delamination agent. The hydrophilic monolayer was applied for the detection of dopamine based on visible-light absorption originating from charge-transfer excitation from adsorbed dopamine to titanate.

Monolayer-to-bilayer transformation of silicenes and their structural analysis

Silicene, a two-dimensional honeycomb network of silicon atoms like graphene, holds great potential as a key material in the next generation of electronics; however, its use in more demanding applications is prevented because of its instability under ambient conditions. Here we report three types of bilayer silicenes that form after treating calcium-intercalated monolayer silicene (CaSi2) with a BF4(-) -based ionic liquid. The bilayer silicenes that are obtained are sandwiched between planar crystals of CaF2 and/or CaSi2, with one of the bilayer silicenes being a new allotrope of silicon, containing four-, five- and six-membered sp(3) silicon rings. The number of unsaturated silicon bonds in the structure is reduced compared with monolayer silicene. Additionally, the bandgap opens to 1.08 eV and is indirect; this is in contrast to monolayer silicene which is a zero-gap semiconductor.

Mechanical properties and fracture dynamics of silicene membranes

As graphene has become one of the most important materials, there is renewed interest in other similar structures. One example is silicene, the silicon analogue of graphene. It shares some of the remarkable graphene properties, such as the Dirac cone, but presents some distinct ones, such as a pronounced structural buckling. We have investigated, through density functional based tight-binding (DFTB), as well as reactive molecular dynamics (using ReaxFF), the mechanical properties of suspended single-layer silicene. We calculated the elastic constants, analyzed the fracture patterns and edge reconstructions. We also addressed the stress distributions, unbuckling mechanisms and the fracture dependence on the temperature. We analysed the differences due to distinct edge morphologies, namely zigzag and armchair.

Facile Synthesis of pH-sensitive Germanium Nanocrystals with High Quantum Yield for Intracellular Acidic Compartment Imaging

A green-light emitting germanium nanocrystal-based biosensor to monitor lysosomal pH changes is developed. The Ge nanocrystals are synthesized in an aqueous solution with a significantly enhanced photoluminescence quantum yield of 26%. This synthesis involves a facile solution based route which avoided the use of toxic or environmentally unfriendly agents. Importantly, the photoluminescence intensity of the synthesized Ge nanocrystals is particularly sensitive to changes in pH between 5 and 6. When incubated with cultured cells, the nanocrystals are internalized and subsequently translocated via the lysosomal pathway, and the Ge nanocrystals' fluorescence are greatly enhanced, even when the lysosomal pH is only slightly increased. These results reveal that the Ge nanocrystals possess high pH sensitivity compared to a commercially available dye, LysoSensor Green DND-189. The fluorescent properties of the Ge nanocrystals are demonstrated to be dependent on both the crystal form and their surface chemistry. The superior fluorescence properties and bioapplicability of the Ge nanocrystals makes them a promising intracellular bioimaging probe for monitoring various pH-sensitive processes in cells.

Density functional theory study on boron- and phosphorus-doped hydrogen-passivated silicene

When silicene is passivated by hydrogen, a bandgap occurs so that it becomes a semiconductor.

Surface-functionalized monolayered nanodots of a transition metal oxide and their properties

Transition metal oxide monolayers with controlled lateral size, surface chemistry, and properties are obtained in a nonpolar organic medium.