Introduction of an antifouling photoelectrode: an effective strategy for a high-performance photoelectrochemical cytosensor

As nonspecific adsorption or biofouling has obvious side effects on the selectivity, it is a great challenge for cytosensors to detect target cells in practical biological samples. In this study, we first propose the design and synthesis of an antifouling photoelectrode. The antifouling photoelectrode not only has the desired photocurrent response, but also possesses an unexpected antifouling capability of resisting nonspecific adsorption of biomolecules. Herein, the PEDOT-HPG/SnS/ZnO-NT antifouling photoelectrode was formed and a robust photoelectrochemical cytosensor with enhanced sensitivity and selectivity has been demonstrated.

Graphene, an Interesting Nanocarbon Allotrope for Biosensing Applications: Advances, Insights, and Prospects

Graphene, a relatively new two-dimensional (2D) nanomaterial, possesses unique structure (e.g. lighter, harder, and more flexible than steel) and tunable physicochemical (e.g. electronical, optical) properties with potentially wide eco-friendly and cost-effective usage in biosensing. Furthermore, graphene-related nanomaterials (e.g. graphene oxide, doped graphene, carbon nanotubes) have inculcated tremendous interest among scientists and industrials for the development of innovative biosensing platforms, such as arrays, sequencers and other nanooptical/biophotonic sensing systems (e.g. FET, FRET, CRET, GERS). Indeed, combinatorial functionalization approaches are constantly improving the overall properties of graphene, such as its sensitivity, stability, specificity, selectivity, and response for potential bioanalytical applications. These include real-time multiplex detection, tracking, qualitative, and quantitative characterization of molecules (i.e. analytes [H₂O₂, urea, nitrite, ATP or NADH]; ions [Hg²⁺, Pb²⁺, or Cu²⁺]; biomolecules (DNA, iRNA, peptides, proteins, vitamins or glucose; disease biomarkers such as genetic alterations in BRCA1, p53) and cells (cancer cells, stem cells, bacteria, or viruses). However, there is still a paucity of comparative reports that critically evaluate the relative toxicity of carbon nanoallotropes in humans. This manuscript comprehensively reviews the biosensing applications of graphene and its derivatives (i.e. GO and rGO). Prospects and challenges are also introduced.

Oxygen vacancies enhanced photoelectrochemical aptasensing of 2, 3', 5, 5'-tetrachlorobiphenyl amplified with Ag3VO4 nanoparticle-TiO2 nanotube array heterostructure

This work proposed an enhancing mechanism of both oxygen vacancies (OVs) and the heterostructure for amplifying the photoelectrochemical (PEC) aptasensing signal. The OVs were formed by in situ electrochemical reduction of TiO₂ nanotube arrays (TNTAs), and well-separated Ag₃VO₄ nanoparticles (NPs) were then deposited on the TNTAs. The band gaps and positions of these nanomaterials were evaluated by Tauc equation and Mott-Schottky plots to verify the formation of the heterojunction. The OVs and heterojunction greatly enhanced the visible light absorption and improved the charge separation of TNTAs. The amplified PEC signal could be quenched by the resonance energy transfer between Ag₃VO₄ NPs and gold nanorods (Au NRs), which were labeled on the complementary DNA (cDNA) to the aptamer immobilized on the heterojunction. Upon the recognition of the aptamer to target analyte, the Au NR-cDNA was detached from the sensor, leading to a "signal-on" aptasensing strategy. Under optimal conditions, the PEC aptasensor displayed a detection limit of 0.015 pg mL^-1 and a linear range from 0.02 to 300 ng mL^-1 for 2,3',5,5'-tetrachlorobiphenyl.

A pro-gastrin-releasing peptide imprinted photoelectrochemical sensor based on the in situ growth of gold nanoparticles on a MoS2 nanosheet surface

Molecularly imprinted PEC platform for Pro-GRP sensing was prepared using lamellar MoS₂ nanosheets assembled with gold nanoparticles as photoactive elements. The molecularly imprinted PEC sensor shows excellent sensing performances towards Pro-GRP.

Significant Enhancement of the Visible Light Photocatalytic Properties in 3D BiFeO₃/Graphene Composites

Bismuth ferrite (BiFeO₃, BFO) submicron cubes and 3D BFO/graphene composite materials were synthesized by a simple hydrothermal process. The crystallization processes of the 3D BFO/graphene composites with different graphene oxide (GO) concentrations were studied for their visible light photocatalytic properties. Compared to the single BFO submicron cubes, 3D BFO/graphene composites have greatly improved photocatalytic activity. A high photocatalytic performance is obtained at a GO concentration of 3 mg/mL, with the degradation rate of methylene blue (MB) dye reaching up to 92% in 140 min. The enhancement of photocatalytic activity can be attributed to the large specific surface area and 3D architecture of 3D composites, which provide more transport paths to effectively improve the separation rate of photo-generated electrons and holes. Therefore, 3D BFO/graphene composites have a broad prospect of application in the field of photocatalysis.

A sensitive photoelectrochemical assay of miRNA-155 based on a CdSe QDs//NPC-ZnO polyhedra photocurrent-direction switching system and target-triggered strand displacement amplification strategy

A new photoelectrochemical biosensor based on a CdSe QD//NPC-ZnO polyhedra photocurrent-direction switching system and a target-triggered strand displacement amplification strategy was developed for the detection of miRNA-155.

Formation of Homogeneous Epinephrine-Melanin Solutions to Fabricate Electrodes for Enhanced Photoelectrochemical Biosensing

The development of a simple but effective surface modification method is very important for the construction of biosensing interfaces. In this work, a postsynthetic water-soluble epinephrine-melanin (EPM) prepared from the self-polymerization of epinephrine has been demonstrated as an alternative of the widely used in situ formed polydopamine (PDA) for the surface coating of TiO₂ nanoparticles and the construction of a photoelectrochemical (PEC) biosensing interface. In contrast to the formation of insoluble aggregates in solution for dopamine, a homogeneous solution was obtained for epinephrine after the self-polymerization. The use of EPM as a postsynthetic material enables the surface coating of TiO₂ with the simple drop-casting method. Compared with the widely used dip-coating method for in situ PDA modification, the developed drop-casting method based on the use of water-soluble postsynthetic EPM saves more time, avoids the waste of bulk solution, and undoubtedly decreases the batch-to-batch inconsistencies. The simple coating of commercially available TiO₂ nanoparticles with EPM greatly enhances the PEC performance due to the charge transfer property of EPM. The application of EPM in the construction of the PEC biosensing interface was demonstrated by the immobilization of a model biorecognition element (prostate specific antigen (PSA) antibody) onto EPM modified indium tin oxide (ITO) photoanode. Sensitive detection of PSA with high selectivity and stability was obtained on the basis of the biological recognition ability of PSA antibody. This work may renew the use of postsynthetic melanin-like biopolymers in other fields.

Ultrasensitive photoelectrochemical aptasensor for lead ion detection based on sensitization effect of CdTe QDs on MoS2-CdS:Mn nanocomposites by the formation of G-quadruplex structure

An ultrasensitive photoelectrochemical (PEC) aptasensor for lead ion (Pb²⁺) detection was fabricated based on MoS₂-CdS:Mn nanocomposites and sensitization effect of CdTe quantum dots (QDs). MoS₂-CdS:Mn modified electrode was used as the PEC matrix for the immobilization of probe DNA (pDNA) labeled with CdTe QDs. Target DNA (tDNA) were hybridized with pDNA to made the QDs locate away from the electrode surface by the rod-like double helix. The detection of Pb²⁺ was based on the conformational change of the pDNA to G-quadruplex structure in the presence of Pb²⁺, which made the labeled QDs move close to the electrode surface, leading to the generation of sensitization effect and evident increase of the photocurrent intensity. The linear range was 50 fM to 100 nM with a detection limit of 16.7 fM. The recoveries of the determination of Pb²⁺ in real samples were in the range of 102.5-108.0%. This proposed PEC aptasensor provides a new sensing strategy for various heavy metal ions at ultralow levels.

Conjugated Polymer-Based Photoelectrochemical Cytosensor with Turn-On Enable Signal for Sensitive Cell Detection

In this work, a new photoelectrochemical (PEC) cytosensor was constructed by using cationic polyfluorene derivative, poly(9,9-bis(6'-(N,N,N,-trimethylammonium)hexyl)fluorene-co-alt-1,4-phenylene)bromide (PFP) as the photoelectric-responsive material for sensitive cell detection. Positive-charged PFP with high photoelectric conversion efficiency can generate robust photocurrent under light illumination. In the PEC cytosensor, 3-phosphonopropionic acid was linked to the indium tin oxide electrode, followed by modification with antiepithelial-cell-adhesion-molecule (EpCAM) antibody via amide condensation reaction. Thus, target SKBR-3 cells with overexpressed EpCAM antigen could be captured onto the electrode via the specific antibody-antigen interactions. Upon adding cationic PFP, a favorable electrostatic interaction between cationic PFP and negatively charged cell membrane led to a turn-on detection signal for target SKBR-3 cells. This new cytosensor not only exhibits good sensitivity because of the good photoelectric performance of conjugated polymers, but also offers decent selectivity to target cells by taking advantage of the specific antibody-antigen recognition.

Peptide-Based Photoelectrochemical Cytosensor Using a Hollow-TiO2/EG/ZnIn2S4 Cosensitized Structure for Ultrasensitive Detection of Early Apoptotic Cells and Drug Evaluation

The ability to rapidly detect apoptotic cells and accurately evaluate therapeutic effects is significant in cancer research. To address this target, a biocompatible, ultrasensitive photoelectrochemical (PEC) cytosensing platform was developed based on electrochemically reduced graphene (EG)/ZnIn₂S₄ cosensitized TiO₂ coupled with specific recognition between apoptotic cells and phosphatidylserine-binding peptide (PSBP). In this strategy, the HL-60 cells were selected as a model and C005, nilotinib, and imatinib were selected as apoptosis inducers to show cytosensing performances. In particular, a TiO₂ photoactive substrate was designed as hollow spheres to enhance the PEC performance. Graphene was electrodeposited on the hollow TiO₂-modified electrode to accelerate electron transfer and increase conductivity, followed by in situ growth of ZnIn₂S₄ nanocrystals as photosensitizers via successive ionic layer adsorption and reaction method, forming a TiO₂/EG/ZnIn₂S₄ cosensitized structure that was used as a PEC matrix to immobilize PSBP for the recognition of early apoptotic cells. The detection of apoptotic cells was based on steric hindrance originating from apoptotic cell capture to induce an obvious decrease in the photocurrent signal. The ultrahigh sensitivity of the cytosensor resulted from enhanced PEC performance, bioactivity, and high binding affinity between PSBP and apoptotic cells. Compared with other assays, incorporate toxic elements were avoided, such as Cd, Ru, and Te, which ensured normal cell growth and are appropriate for cell analysis. The designed PEC cytosensor showed a low detection limit of apoptotic cells (as low as three cells), a wide linear range from 1 × 10³ to 5 × 10⁷ cells/mL, and an accurate evaluation of therapeutic effects. It also exhibited good specificity, reproducibility, and stability.

Current Technologies of Electrochemical Immunosensors: Perspective on Signal Amplification

An electrochemical immunosensor employs antibodies as capture and detection means to produce electrical charges for the quantitative analysis of target molecules. This sensor type can be utilized as a miniaturized device for the detection of point-of-care testing (POCT). Achieving high-performance analysis regarding sensitivity has been one of the key issues with developing this type of biosensor system. Many modern nanotechnology efforts allowed for the development of innovative electrochemical biosensors with high sensitivity by employing various nanomaterials that facilitate the electron transfer and carrying capacity of signal tracers in combination with surface modification and bioconjugation techniques. In this review, we introduce novel nanomaterials (e.g., carbon nanotube, graphene, indium tin oxide, nanowire and metallic nanoparticles) in order to construct a high-performance electrode. Also, we describe how to increase the number of signal tracers by employing nanomaterials as carriers and making the polymeric enzyme complex associated with redox cycling for signal amplification. The pros and cons of each method are considered throughout this review. We expect that these reviewed strategies for signal enhancement will be applied to the next versions of lateral-flow paper chromatography and microfluidic immunosensor, which are considered the most practical POCT biosensor platforms.

Gold nanrods plasmon-enhanced photoelectrochemical aptasensing based on hematite/N-doped graphene films for ultrasensitive analysis of 17β-estradiol

It remains a vital task to establish ultrasensitive sensing interfaces for detection of target analytes to meet the demands of modern analysis. Herein, a highly sensitive turn-on photoelectrochemical (PEC) platform for trace 17β-estradiol (E2) assay was developed based on Au nanrods (AuNRs) with surface plasmon resonance (SPR) properties induced signal amplification. Specifically, a ternary hybrid was prepared by integrating hematite (α-Fe₂O₃) nanocrystals and N-doped graphene (NG) with AuNRs, which further served as highly efficient photoactive species. Subsequently, a PEC sensing platform was fabricated based on the specific binding of E2 and its aptamer. On such a sensor, the capture of E2 molecules by aptamers led to increased photocurrent. This was attributed to that the specific recognition reaction between E2 and aptamer resulted in the conformational change of the aptamers and complete dissociation of some aptamers on the PEC sensing interface. It can be confirmed by the electrochemical impedance spectroscopy (EIS) results. This process decreased the steric hindrances between the electrode surface and solution and thus increased the photocurrent response. Under the optimal conditions, the as-prepared PEC aptasensor exhibited superb analytical performances for detection of E2 in the range from 1×10^-15M to 1×10^-9M with a detection limit of 3.3×10^-16M. The aptasensor manifested outstanding selectivity towards E2 when other endocrine disrupting compounds with similar structure coexisted. Furthermore, the aptasensor was successfully applied for the determination of E2 in milk powder. The present strategy provides a potential way to boost the activity of photoactive materials and improve the sensitivity of PEC biosensor.

Fabrication of photo-electrochemical biosensors for ultrasensitive screening of mono-bioactive molecules: the effect of geometrical structures and crystal surfaces

The controlled design of hierarchical CN-ST flowers is a key feature for creating biosensor surface electrodes for photo-electrochemical, ultrasensitive screening of mono-bioactive molecules.

The Application of Graphene and Its Derivatives to Energy Conversion, Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom-thick 2D structure with sp(2) hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GR's unique structure, band structure engineering, physical and chemical properties, and recent energy-related progress of GR-based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO2 reduction, dye-sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR-based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy-metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR-based materials in the exciting fields of energy, environment, and bioscience.

2-Dimensional graphene as a route for emergence of additional dimension nanomaterials

Dimension has a different and impactful significance in the field of innovation, research and technologies. Starting from one-dimension, now, we all are moving towards 3-D visuals and try to do the things in this dimension. However, we still have some very innovative and widely applicable nanomaterials, which have tremendous potential in the form of 2-D only i.e. graphene. In this review, we have tried to incorporate the reported pathways used so far for modification of 2-D graphene sheets to make is three-dimensional. The modified graphene been applied in many fields like supercapacitors, sensors, catalysis, energy storage devices and many more. In addition, we have also incorporated the conversion of 2-D graphene to their various other dimensions like zero-, one- or three-dimensional nanostructures.

Enhanced photoelectrochemical aptasensing platform amplified through the sensitization effect of CdTe@CdS core–shell quantum dots coupled with exonuclease-I assisted target recycling

The sensitization of CdTe@CdS core–shell quantum dots on N-doped mesoporous TiO₂, integrated with exonuclease-I assisted target recycling, was applied to construct an enhanced photoelectrochemical aptasensing platform.

A localized surface plasmon resonance-enhanced photoelectrochemical biosensing strategy for highly sensitive and scatheless cell assay under red light excitation

In this work, a novel photoelectrochemical biosensing strategy was designed for cell assay under 630 nm (red light) excitation.

Aptasensor based on tripetalous cadmium sulfide-graphene electrochemiluminescence for the detection of carcinoembryonic antigen

A facile label-free electrochemiluminescence (ECL) aptasensor, based on the ECL of cadmium sulfide-graphene (CdS-GR) nanocomposites with peroxydisulfate as the coreactant, was designed for the detection of carcinoembryonic antigen (CEA). Tripetalous CdS-GR nanocomposites were synthesized through a simple onepot solvothermal method and immobilized on the glassy carbon electrode surface. L-Cystine (L-cys) could largely promote the electron transfer and enhance the ECL intensity. Gold nanoparticles (AuNPs) were assembled onto the L-cys film modified electrode for aptamer immobilization and ECL signal amplification. The aptamer modified with thiol was adsorbed onto the surface of the AuNPs through a Au-S bond. Upon hybridization of the aptamer with the target protein, the sequence could conjugate CEA to form a Y architecture. With CEA as a model analyte, the decreased ECL intensity is proportional to the CEA concentration in the range of 0.01-10.0 ng mL(-1) with a detection limit of 3.8 pg mL(-1) (S/N = 3). The prepared aptasensor was applied to the determination of CEA in human serum samples. The recoveries of CEA in the human serum samples were between 85.0% and 109.5%, and the RSD values were no more than 3.4%.

"Signal-on" photoelectrochemical biosensor for sensitive detection of human T-Cell lymphotropic virus type II DNA: dual signal amplification strategy integrating enzymatic amplification with terminal deoxynucleotidyl transferase-mediated extension

A novel "signal-on" photoelectrochemical (PEC) biosensor for sensitive detection of human T-cell lymphotropic virus type II (HTLV-II) DNA was developed on the basis of enzymatic amplification coupled with terminal deoxynucleotidyl transferase (TdT)-mediated extension strategy. The intensity of the photocurrent signal was proportional to the concentration of the HTLV-II DNA-target DNA (tDNA) by dual signal amplification. In this protocol, GR-CdS:Mn/ZnS nanocomposites were used as photoelectric conversion material, while pDNA was used as the tDNA recognizing unit. Moreover, the TdT-mediated extension and the enzymatic signal amplification technique were used to enhance the sensitivity of detection. Using this novel dual signal amplification strategy, the prototype of PEC DNA sensor can detect as low as ∼0.033 fM of HTLV-II DNA with a linear range of 0.1-5000 fM, with excellent differentiation ability even for single-base mismatches. This PEC DNA assay opens a promising platform to detect various DNA targets at ultralow levels for early diagnoses of different diseases.

Plasmonic AuNP/g-C3N4 Nanohybrid-based Photoelectrochemical Sensing Platform for Ultrasensitive Monitoring of Polynucleotide Kinase Activity Accompanying DNAzyme-Catalyzed Precipitation Amplification

A convenient and feasible photoelectrochemical (PEC) sensing platform based on gold nanoparticles-decorated g-C3N4 nanosheets (AuNP/g-C3N4) was designed for highly sensitive monitoring of T4 polynucleotide kinase (PNK) activity, using DNAzyme-mediated catalytic precipitation amplification. To realize our design, the AuNP/g-C3N4 nanohybrid was initially synthesized through in situ reduction of Au(III) on the g-C3N4 nanosheets, which was utilized for the immobilization of hairpin DNA1 (HP1) on the sensing interface. Thereafter, a target-induced isothermal amplification was automatically carried out on hairpin DNA2 (HP2) in the solution phase through PNK-catalyzed 5'-phosphorylation accompanying formation of numerous trigger DNA fragments, which could induce generation of hemin/G-quadruplex-based DNAzyme on hairpin DNA1. Subsequently, the DNAzyme could catalyze the 4-chloro-1-naphthol (4-CN) oxidation to produce an insoluble precipitation on the AuNP/g-C3N4 surface, thereby resulting in the local alternation of the photocurrent. Experimental results revealed that introduction of AuNP on the g-C3N4 could cause a ∼100% increase in the photocurrent because of surface plasmon resonance-enhanced light harvesting and separation of photogenerated e-/h+ pairs. Under the optimal conditions, the percentage of photocurrent decrement (ΔI/I0, relative to background signal) increased with the increasing PNK activity in a dynamic working range from 2 to 100 mU mL(-1) with a low detection limit (LOD) of 1.0 mU mL(-1). The inhibition effect of adenosine diphosphate also received a good performance in PNK inhibitor screening research, thereby providing a useful scheme for practical use in quantitative PNK activity assay for life science and biological research.

Biomolecule-free, selective detection of o-diphenol and its derivatives with WS2/TiO2-based photoelectrochemical platform

Herein, a novel photoelectrochemical platform with WS2/TiO2 composites as optoelectronic materials was designed for selective detection of o-diphenol and its derivatives without any biomolecule auxiliary. First, catechol was chosen as a model compound for the discrimination from resorcinol and hydroquinone; then several o-diphenol derivatives such as dopamine, caffeic acid, and catechin were also detected by employing this proposed photoelectrochemical sensor. Finally, the mechanism of such a selective detection has been elaborately explored. The excellent selectivity and high sensitivity should be attributed to two aspects: (i) chelate effect of adjacent double oxygen atoms in the o-diphenol with the Ti(IV) surface site to form a five/six-atom ring structure, which is considered as the key point for distinction and selective detection. (ii) This selected WS2/TiO2 composites with proper band level between WS2 and TiO2, which could make the photogenerated electron and hole easily separated and results in great improvement of sensitivity. By employing such a photoelectrochemical platform, practical samples including commercial clinic drugs and human urine samples have been successfully performed for dopamine detection. This biomolecule-free WS2/TiO2 based photoelectrochemical platform demonstrates excellent stability, reproducibility, remarkably convenient, and cost-effective advantages, as well as low detection limit (e.g., 0.32 μmol L(-1) for dopamine). It holds great promise to be applied for detection of o-diphenol kind species in environment and food fields.

Enhanced photoelectrochemical aptasensing platform based on exciton energy transfer between CdSeTe alloyed quantum dots and SiO2@Au nanocomposites

High-efficient exciton energy transfer between CdSeTe alloyed quantum dots and SiO2@Au nanocomposites was applied to develop an enhanced photoelectrochemical aptasensing platform with ultrahigh sensitivity, good selectivity, reproducibility and stability.

Photoelectrochemical bioanalysis: the state of the art

This review provides a panoramic snapshot of the state of the art in the dynamically developing field of photoelectrochemical bioanalysis.

H2S bubbles-assisted synthesis of hollow Cu2−xSeyS1−y/reduced graphene oxide nanocomposites with tunable compositions and localized surface plasmon resonance

Homogeneous hollow Cu_2−xSe_yS_1−y/rGO nanocomposites are controllably synthesized by a facile one-pot aqueous chemical approach via H₂S gas bubble templates at room temperature, using a nonhazardous reducing agent, ascorbic acid.