Supramolecular Alternate Co-Assembly through a Non-Covalent Amphiphilic Design: Conducting Nanotubes with a Mixed D-A Structure

Pathway Selection in Temporal Evolution of Supramolecular Polymers of Ionic π-Systems: Amphiphilic Organic Solvent Dictates the Fate of Water

Understanding solvent-solute interactions is essential to designing and synthesising soft materials with tailor-made functions. Although the interaction of the solute with the solvent mixture is more complex than the single solvent medium, solvent mixtures are exciting to unfold several unforeseen phenomena in supramolecular chemistry. Here, we report two unforeseen pathways observed during the hierarchical assembly of cationic perylene diimides (cPDIs) in water and amphiphilic organic solvent (AOS) mixtures. When the aqueous supramolecular polymers (SPs) of cPDIs are injected into AOS, initially kinetically trapped short SPs are formed, which gradually transform into thermodynamically stable high aspect ratio SP networks. Using various experimental and theoretical investigations, we found that this temporal evolution follows two distinct pathways depending on the nature of the water-AOS interactions. If the AOS is isopropanol (IPA), water is released from cPDIs into bulk IPA due to strong hydrogen bonding interactions, which further decreases the monomer concentration of cPDIs (Pathway-1). In the case of dioxane AOS, cPDI monomer concentration further increases as water is retained among cPDIs (Pathway-2) due to relatively weak interactions between dioxane and water. Interestingly, these two pathways are accelerated by external stimuli such as heat and mechanical agitation.

Supramolecular Engineering of Ti3 C2 Tx MXene -Perylene Diimide Hybrid Electrodes for the Pseudocapacitive Electrochemical Storage of Calcium Ions

The rare combination of metallic conductivity and surface redox activity enables 2D MXenes as versatile charge storage hosts for the design of high-rate electrochemical energy storage devices. However, high charge density metal ions including but not limited to Ca+2 and Mg+2 pose challenges such as sluggish solid-state diffusion and also inhibiting the charge transfer across electrode-electrolyte interfaces. In this work, free-standing hybrid electrode architectures based on 2D titanium carbide-cationic perylene diimide (Ti3 C2 Tx @cPDI) via supramolecular self-assembly are developed. Secondary bonding interactions such as dipole-dipole and hydrogen bonding between Ti3 C2 Tx and cPDI are investigated by zeta potential and Fourier-transformed infrared (FTIR) spectroscopy . Ti3 C2 Tx @cPDI free-standing electrodes show typical volumetric capacitance up to 260 F cm-3 in Mg2+ and Ca2+ aqueous electrolytes at charging times scales from 3 minutes to a few seconds. Three-dimensional (3D) Bode maps are constructed to understand the charge storage dynamics of Ti3 C2 Tx @cPDI hybrid electrode in an aqueous Ca-ion electrolyte. ,Pseudocapacitance is solely contributed by the nanoscale distribution of redox-active cPDI supramolecular polymers across 2D Ti3 C2 Tx . This study opens avenues for the design of a wide variety of MXene@redox active organic charge hosts for high-rate pseudocapacitive energy storage devices.

Rare Guest-Induced Electrical Conductivity of Zn-Porphyrin Metallacage Inclusion Complexes Featuring π-Donor/Acceptor/Donor Stacks

Charge-transfer (CT) interactions between co-facially aligned π-donor/acceptor (π-D/A) arrays engender unique optical and electronic properties that could benefit (supra)molecular electronics and energy technologies. Herein, we demonstrate that a tetragonal prismatic metal-organic cage (MOC18+) having two parallel π-donor tetrakis(4-carboxyphenyl)-Zn-porphyrin (ZnTCPP) faces selectively intercalate planar π-acceptor guests, such as hexaazatriphenylene hexacarbonitrile (HATHCN), hexacyanotriphenylene (HCTP), and napthanelediimide (NDI) derivatives, forming 1:1 πA@MOC18+ inclusion complexes featuring supramolecular π-D/A/D triads. The π-acidity of intercalated π-acceptors (HATHCN ≫ HCTP ≈ NDIs) dictated the nature and strength of their interactions with the ZnTCPP faces, which in turn influenced the binding affinities (Ka) and optical and electronic properties of corresponding πA@MOC18+ inclusion complexes. Owing to its strongest CT interaction with ZnTCPP faces, the most π-acidic HATHCN guest enjoyed the largest Ka (5 × 106 M-1), competitively displaced weaker π-acceptors from the MOC18+ cavity, and generated the highest electrical conductivity (2.1 × 10-6 S/m) among the πA@MOC18+ inclusion complexes. This work demonstrates a unique through-space charge transport capability of πA@MOC18+ inclusion complexes featuring supramolecular π-D/A/D triads, which generated tunable electrical conductivity, which is a rare but much coveted electronic property of such supramolecular assemblies that could further expand their utility in future technologies.

Hierarchical Composite Self-Sorted Supramolecular Gel Noodles

Multicomponent supramolecular systems can be used to achieve different properties and new behaviors compared to their corresponding single component systems. Here, a two-component system is used, showing that a non-gelling component modifies the assembly of the gelling component, allowing access to co-assembled structures that cannot be formed from the gelling component alone. The systems are characterized across multiple length scales, from the molecular level by NMR and CD spectroscopy to the microstructure level by SANS and finally to the material level using nanoindentation and rheology. By exploiting the enhanced mechanical properties achieved through addition of the second component, multicomponent noodles are formed with superior mechanical properties to those formed by the single-component system. Furthermore, the non-gelling component can be triggered to crystallize within the multicomponent noodles, allowing the preparation of new types of hierarchical composite noodles.

Supramolecular Recognition of Phosphodiester-Based Donor and Acceptor Oligomers Forming Gels in Water

Inspired by automated DNA synthesis, electron-rich dialkoxynaphthalene (DAN) donor and electron-deficient naphthalene-tetracarboxylic diimide (NDI) acceptor phosphodiester-linked homohexamers were synthesized by the phosphoramidite method. Two types of hexamers were prepared, one with only one phosphodiester between the aromatics (i.e., DAN or NDI) and a second with two phosphodiesters around a propanediol between the aromatics, leading to the latter more flexible and more hydrophilic hexamers. The folding properties of these homohexamers alone or mixed together, in water only, were studied by UV-visible absorption spectroscopy and atomic force microscopy (AFM). AFM imaging revealed that a 1:1 mixture of hexaDAN and hexaNDI formed fibers by charge transfer donor-acceptor recognition leading to a hydrogel after drying. The organization of the resulting structures is strongly dependent on the nature of the complementary partner, leading to the formation of mono- or multilayer hydrogel networks with different compactness.

Manipulating the Self-Assembly of Multicomponent Low Molecular Weight Gelators (LMWGs) through Molecular Design

Multicomponent low molecular weight gelators (LMWGs) may self-assemble by co-assembly (CA), social self-sorting (SSS), or narcissistic self-sorting (NSS). Understanding the nuances of the self-assembly processes is important to predict the behavior of multicomponent organogels. Here, we investigate the effect of molecular structure on self-assembly in a series of amino-acid based bicomponent LMWGs that differ in headgroup and alkyl chain length. Packing preference of the organogels was determined using differential scanning calorimetry, nuclear magnetic resonance spectroscopy and small angle X-ray scattering. From 66 bicomponent samples we found 50 CA, 14 SSS and 2 NSS. Furthermore, we performed statistical analysis to investigate the role of hydrophobicity and chain length on the overall pathway of self-assembly for these systems. We found the hydrophobicity of the headgroup strongly affected the assembly preference of the organogel, but alkyl chain length only played a small role.

Elucidating the Supramolecular Copolymerization of N- and C-Centered Benzene-1,3,5-Tricarboxamides: The Role of Parallel and Antiparallel Packing of Amide Groups in the Copolymer Microstructure

An in‐depth study of the supramolecular copolymerization behavior of N‐ and C‐centered benzene‐1,3,5‐tricarboxamides (N‐ and C‐BTAs) has been conducted in methylcyclohexane and in the solid state. The connectivity of the amide groups in the BTAs differs, and mixing N‐ and C‐BTAs results in supramolecular copolymers with a blocky microstructure in solution. The blocky microstructure results from the formation of weaker and less organized, antiparallel hydrogen bonds between N‐ and C‐BTAs. In methylcyclohexane, the helical threefold hydrogen‐bonding network present in C‐ and N‐BTAs is retained in the mixtures. In the solid state, in contrast, the hydrogen bonds of pure BTAs as well as their mixtures organize in a sheet‐like pattern, and in the mixtures long‐range order is lost. Drop‐casting to kinetically trap the solution microstructures shows that C‐BTAs retain the helical hydrogen bonds, but N‐BTAs immediately adopt the sheet‐like pattern, a direct consequence of the lower stabilization energy of the helical hydrogen bonds. In the copolymers, the stability of the helical aggregates depends on the copolymer composition, and helical aggregates are only preserved when a high amount of C‐BTAs is present. The method outlined here is generally applicable to elucidate the copolymerization behavior of supramolecular monomers both in solution as well as in the solid state.

Self-Assembling Hydrogel Structures for Neural Tissue Repair

Hydrogel materials have been employed as biological scaffolds for tissue regeneration across a wide range of applications. Their versatility and biomimetic properties make them an optimal choice for treating the complex and delicate milieu of neural tissue damage. Aside from finely tailored hydrogel properties, which aim to mimic healthy physiological tissue, a minimally invasive delivery method is essential to prevent off-target and surgery-related complications. The specific class of injectable hydrogels termed self-assembling peptides (SAPs), provide an ideal combination of in situ polymerization combined with versatility for biofunctionlization, tunable physicochemical properties, and high cytocompatibility. This review identifies design criteria for neural scaffolds based upon key cellular interactions with the neural extracellular matrix (ECM), with emphasis on aspects that are reproducible in a biomaterial environment. Examples of the most recent SAPs and modification methods are presented, with a focus on biological, mechanical, and topographical cues. Furthermore, SAP electrical properties and methods to provide appropriate electrical and electrochemical cues are widely discussed, in light of the endogenous electrical activity of neural tissue as well as the clinical effectiveness of stimulation treatments. Recent applications of SAP materials in neural repair and electrical stimulation therapies are highlighted, identifying research gaps in the field of hydrogels for neural regeneration.

Tubular supramolecular alternating copolymers fabricated by cyclic peptide-polymer conjugates

Supramolecular copolymers are an emerging class of materials, which bring together different properties and functionalities of multiple components via noncovalent interactions. While it is widely acknowledged that the repeating unit sequence plays an essential role on the performance of these materials, mastering and tuning the supramolecular copolymer sequence is still an open challenge. To date, only statistical supramolecular copolymers have been reported using cyclic peptide-polymer conjugates as building blocks. To enrich the diversity of tubular supramolecular copolymers, we report here a strategy of controlling their sequences by introducing an extra complementary noncovalent interaction. Hence, two conjugates bearing one electron donor and one electron acceptor, respectively, are designed. The two conjugates can individually assemble into tubular supramolecular homopolymers driven by the multiple hydrogen bonding interactions between cyclic peptides. However, the complementary charge transfer interaction between the electron donor and acceptor makes each conjugate more favorable for complexing with its counterpart, resulting in an alternating sequence of the supramolecular copolymer. Following the same principle, more functional supramolecular alternating copolymers are expected to be designed and constructed via other complementary noncovalent interactions (electrostatic interactions, metal coordination interactions, and host-guest interactions, etc.).

Morphological Transitions of a Photoswitchable Aramid Amphiphile Nanostructure

Self-assembly of small amphiphilic molecules in water can lead to nanostructures of varying geometries with pristine internal molecular organization. Here we introduce a photoswitchable aramid amphiphile (AA), designed to exhibit extensive hydrogen bonding and robust mechanical properties upon self-assembly, while containing a vinylnitrile group for photoinduced cis-trans isomerization. We demonstrate spontaneous self-assembly of the vinylnitrile-containing AA in water to form nanoribbons. Upon UV irradiation, trans-to-cis isomerizations occur concomitantly with a morphological transition from nanoribbons to nanotubes. The nanotube structure persists in water for over six months, stabilized by strong and collective intermolecular interactions. We demonstrate that the nanoribbon-to-nanotube transition is reversible upon heating and that switching between states can be achieved repeatedly. Finally, we use electron microscopy to capture the transition and propose mechanisms for nanoribbon-to-nanotube rearrangement and vice versa. The stability and switchability of photoresponsive AA nanostructures make them viable for a range of future applications.

Supramolecular Depolymerization in the Mixture of Two Poor Solvents: Mechanistic Insights and Modulation of Supramolecular Polymerization of Ionic π-Systems

Solvents are fundamentally essential for the synthesis and processing of soft materials. Supramolecular polymers (SPs), an emerging class of soft materials, are usually stable in single and mixtures of poor solvents. In contrast to these preconceived notions, here we report the depolymerization of SPs in the mixture of two poor solvents. This surprising behavior was observed for well-known cationic perylene diimides (cPDIs) in the mixtures of water and amphiphilic organic solvents such as isopropanol (IPA). cPDIs form stable SPs in water and IPA but readily depolymerize into monomers in 50-70 vol% IPA containing water. This is due to the selective solvation of the π-surface of cPDIs by alkyl chains of IPA and ionic side chains by water, as evidenced by molecular dynamic simulations. Moreover, by systematically changing the ratio between water and amphiphilic organic solvent, we could achieve an unprecedented supramolecular polymerization both by increasing and decreasing the solvent polarity.

Assembling Anthracene-Tailored Amphiphiles: Charge-Transfer Interactions Directed Hierarchical Nanofibers with Ameliorative Antibacterial Activity toward Plant Pathogens

The effective prevention of plant bacterial infections has been complicated and challenged by unceasing bacterial resistance. The application of traditional bactericides has achieved certain effects to alleviate this situation. However, these chemicals also have limitations, such as short half-life in reality, limited bioavailability, and pollutant emission from their formulations. These disadvantages drive the demand for promoting antibacterial therapeutics. Self-assembled nanostructures based on amphiphiles have inherently versatile characteristics, including high durability, good bioavailability, sustained release, and regenerability. As such, they have garnered wide interest because of these advantages that may serve as a feasible platform for the management of pathogenic infections. Flexible tuning of the shapes of these nanostructures by manipulating noncovalent driving forces consequently results in different levels of antibacterial activity. Herein, an antibacterial amphiphile, 1-[11-(9-anthracenylmethoxy)-11-oxoundecyl]pyridinium bromide (AP), was assembled into microfilms in screening medium. Hierarchical nanofibers were constructed by introducing an electron-deficient trinitrofluorenone (TNF) molecule into the assembling system directed by charge-transfer (CT) interactions to further investigate the contribution of aggregate shape to bioactivity. Biological evaluation revealed that antibacterial efficacy improved after CT complex formation. This study provides an innovative platform for developing versatile assembled structures for restraining the propagation of plant pathogens and an improved understanding of the actual interplay between the self-assembly and antibacterial ability of bactericides at the supramolecular level.

Triplet photosensitizer-nanotube conjugates: synthesis, characterization and photochemistry of charge stabilizing, palladium porphyrin/carbon nanotube conjugates

The ability of a triplet photosensitizer to generate long-lived charge separated states, in contrast to traditionally used singlet photosensitizers, in covalently functionalized single-walled carbon nanotube hybrids has been investigated. Enriched single-walled carbon nanotubes with two diameters, namely (6,5) and (7,6), were covalently modified to carry a charge-stabilizing triplet photosensitizer derived from a palladium porphyrin. The nanohybrids were fully characterized and the presence of intramolecular interactions between the porphyrin and nanotubes was established from various spectroscopic, imaging, electrochemical and thermochemical studies. Photoluminescence of palladium porphyrin was found to be quantitatively quenched in the presence of covalently appended SWCNTs and this quenching is due to excited state charge separation and has been established by femtosecond transient absorption studies. Owing to the presence of the triplet photosensitizer, the charge separated states lasted over 3 ns, i.e., much longer than those reported earlier for singlet photosensitizer-derived nanotube hybrids. The nanohybrids also exhibited efficient photocatalytic behavior in experiments involving electron pooling of one-electron reduced methyl viologen in the presence of a sacrificial electron donor. Higher yields of photoproducts were achieved from the present donor-acceptor nanohybrids when compared with those of singlet photosensitizer-derived nanohybrids, more so for (6,5) nanotube derived hybrids compared to (7,6) nanotube derived hybrids. The present findings highlight the importance of triplet photosensitizer derived nanohybrids in artificial photosynthesis of charge separation and photocatalytic applicatons.

A guide to supramolecular polymerizations

Supramolecular polymers are non-covalent assemblies of unimeric building blocks connected by secondary interactions and hold great promises due to their dynamic nature.

Importance of Side-Chains on Molecular Characteristics of Interacting Organic Molecules

In this work, we have calculated several physical quantities related to two interacting semiconductor organic molecules to reveal the significance and the role of the side-chains. The molecular systems of our target are the geometry-optimized dimer systems: that consisting of two [6,6]-phenyl-C₆₁-butyric acid methyl ester molecules and that consisting of two peryline diimide-related molecules. The physical quantities shown in the present work are their relative molecular geometries, optimized energies, barycentric distances, angles between the two molecular planes, dipole moments, and electronic couplings. We have found that these physical quantities show quite different tendencies among the systems, which results from the absence/presence of the side-chains in these molecular species. It is emphasized that the presence of side-chains brings about the diversity of molecular characteristics in interacting molecules. This may point out the importance of side-chains in the various organic materials in general.

Insights into the Kinetics of Supramolecular Comonomer Incorporation in Water

Multicomponent supramolecular polymers are a versatile platform to prepare functional architectures, but a few studies have been devoted to investigate their noncovalent synthesis. Here, we study supramolecular copolymerizations by examining the mechanism and time scales associated with the incorporation of new monomers in benzene-1,3,5-tricarboxamide (BTA)-based supramolecular polymers. The BTA molecules in this study all contain three tetra(ethylene glycol) chains at the periphery for water solubility but differ in their alkyl chains that feature either 10, 12 or 13 methylene units. C₁₀BTA does not form ordered supramolecular assemblies, whereas C₁₂BTA and C₁₃BTA both form high aspect ratio supramolecular polymers. First, we illustrate that C₁₀BTA can mix into the supramolecular polymers based on either C₁₂BTA or C₁₃BTA by comparing the temperature response of the equilibrated mixtures to the temperature response of the individual components in water. Subsequently, we mix C₁₀BTA with the polymers and follow the copolymerization over time with UV spectroscopy and hydrogen/deuterium exchange mass spectrometry experiments. Interestingly, the time scales obtained in both experiments reveal significant differences in the rates of copolymerization. Coarse-grained simulations are used to study the incorporation pathway and kinetics of the C₁₀BTA monomers into the different polymers. The results demonstrate that the kinetic stability of the host supramolecular polymer controls the rate at which new monomers can enter the existing supramolecular polymers.

Supramolecular alternate donor-acceptor copolymers mediated by PtPt metal-metal interactions and their photocatalytic applications

Precise arrangement of the aromatic donor-acceptor units is of paramount importance to dictate the performance of multi-component π-functional materials. Herein a novel strategy has been developed toward alternate donor-acceptor copolymers, by incorporating Pt(ii)Pt(ii) metal-metal interactions for the hetero-complexation process. The proximity of Pt atoms endows the resulting supramolecular copolymers with metal-metal-to-ligand charge-transfer transitions in the visible/NIR region. The signals have been further applied for low-energy visible-light photo-catalysis that is unattainable for the individual species. More interestingly, "on-demand" photo-catalytic efficiency can be achieved by manipulating the reversibility of the supramolecular copolymerization process. Hence, the current work demonstrates the efficiency of fabricating multi-component π-functional materials via the elaborate manipulation of non-covalent driving forces.

Strategy for Constructing Shape-Memory Dynamic Networks through Charge-Transfer Interactions

Recently, charge transfer (CT) interactions have received attention for the fabrication of supramolecular architectures due to their inherent compatibilities, directional nature and solvent tolerance. In this study, we report a shape-memory dynamic network constructed by the CT interaction between π-electron-rich naphthalene embedded in poly(ethylene glycol) (PEG-Np) and π-electron-poor six-arm methyl-viologen-ended poly(ethylene glycol) (⁶PEG-MV), which was verified by ultraviolet-visible spectroscopy (UV-vis), fluorescence spectra and swelling tests. Interestingly, the mechanical properties of this CT complex were dramatically enhanced compared with the control without CT interaction. Moreover, the excellent shape-memory effect (SME) was realized due to the good crystallization of the PEG segment and stable netpoints based on the CT interaction. In addition, as we expected, this supramolecular polymer network is self-healable and reprocessable.

Squaramide-Based Supramolecular Materials for Three-Dimensional Cell Culture of Human Induced Pluripotent Stem Cells and Their Derivatives

Synthetic hydrogel materials can recapitulate the natural cell microenvironment; however, it is equally necessary that the gels maintain cell viability and phenotype while permitting reisolation without stress, especially for use in the stem cell field. Here, we describe a family of synthetically accessible, squaramide-based tripodal supramolecular monomers consisting of a flexible tris(2-aminoethyl)amine (TREN) core that self-assemble into supramolecular polymers and eventually into self-recovering hydrogels. Spectroscopic measurements revealed that monomer aggregation is mainly driven by a combination of hydrogen bonding and hydrophobicity. The self-recovering hydrogels were used to encapsulate NIH 3T3 fibroblasts as well as human-induced pluripotent stem cells (hiPSCs) and their derivatives in 3D. The materials reported here proved cytocompatible for these cell types with maintenance of hiPSCs in their undifferentiated state essential for their subsequent expansion or differentiation into a given cell type and potential for facile release by dilution due to their supramolecular nature.

Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells

The bulk-heterojunction blend of an electron donor and an electron acceptor material is the key component in a solution-processed organic photovoltaic device. In the past decades, a p-type conjugated polymer and an n-type fullerene derivative have been the most commonly used electron donor and electron acceptor, respectively. While most advances of the device performance come from the design of new polymer donors, fullerene derivatives have almost been exclusively used as electron acceptors in organic photovoltaics. Recently, nonfullerene acceptor materials, particularly small molecules and oligomers, have emerged as a promising alternative to replace fullerene derivatives. Compared to fullerenes, these new acceptors are generally synthesized from diversified, low-cost routes based on building block materials with extraordinary chemical, thermal, and photostability. The facile functionalization of these molecules affords excellent tunability to their optoelectronic and electrochemical properties. Within the past five years, there have been over 100 nonfullerene acceptor molecules synthesized, and the power conversion efficiency of nonfullerene organic solar cells has increased dramatically, from ∼2% in 2012 to >13% in 2017. This review summarizes this progress, aiming to describe the molecular design strategy, to provide insight into the structure-property relationship, and to highlight the challenges the field is facing, with emphasis placed on most recent nonfullerene acceptors that demonstrated top-of-the-line photovoltaic performances. We also provide perspectives from a device point of view, wherein topics including ternary blend device, multijunction device, device stability, active layer morphology, and device physics are discussed.

Environment-Adaptive Coassembly/Self-Sorting and Stimulus-Responsiveness Transfer Based on Cholesterol Building Blocks

Manipulating the property transfer in nanosystems is a challenging task since it requires switchable molecular packing such as separate aggregation (self-sorting) or synergistic aggregation (coassembly). Herein, a unique manipulation of self-sorting/coassembly aggregation and the observation of switchable stimulus-responsiveness transfer in a two component self-assembly system are reported. Two building blocks bearing the same cholesterol group give versatile topological structures in polar and nonpolar solvents. One building block (cholesterol conjugated cynanostilbene, CCS) consists of cholesterol conjugated with a cynanostilbene unit, and the other one (C₁₀CN) is comprised of cholesterol connected with a naphthalimide group having a flexible long alkyl chain. Their assemblies including gel, crystalline plates, and vesicles are obtained. In gel and crystalline plate phases, the self-sorting behavior dominates, while synergistic coassembly occurs in vesicle phase. Since CCS having the cyanostilbene group can respond to the light irradiation, it undergoes light-induced chiral amplification. C₁₀CN is thermally responsive, whereby its supramolecular chirality is inversed upon heating. In coassembled vesicles, it is interestingly observed that their responsiveness can be transferred by each other, i.e., the C₁₀CN segment is sensitive to the light irradiation, while CCS is thermoresponsive. This unprecedented behavior of the property transfer may shine a light to the precise fabrication of smart materials.

Self-sorted Oligophenylvinylene and Perylene Bisimide Hydrogels

We describe two component hydrogels with networks composed of self-sorted fibres. The component gelators are based on 1,4-distyrylbenzene (OPV3) and perylene bisimide (PBI) units. Self-sorted gels can be formed by a slow decrease in pH, which leads to sequential assembly. We demonstrate self-sorting by NMR, rheology and small angle X-ray scattering (SAXS). Photoconductive xerogels can be prepared by drying these gels. The wavelength response of the xerogel is different to that of the PBI alone.

Temporal switching of an amphiphilic self-assembly by a chemical fuel-driven conformational response

The spatial and temporal control of self-assemblies is the latest scientific hurdle in supramolecular chemistry which is inspired by the functioning of biological systems fueled by chemical signals. In this study, we work towards alleviating this scenario by employing a unique amphiphilic foldamer that operates under the effect of a chemical fuel. The conformational changes in the foldamer amplify into observable morphological changes in its amphiphilic assembly that are controlled by external molecular cues (fuel). We take advantage of this redox responsive foldamer to affect its conformation in a temporal manner by an enzymatic pathway. The temporal characteristics of the transient conformation/assembly can be modulated by varying the concentrations of the fuel and enzyme. We believe that such a design strategy can have positive consequences in designing molecular and supramolecular systems for future active, adaptive and autonomous materials.

Co-assembly of donor and acceptor towards organogels tuned by charge transfer interaction strength

Co-assembly of n-type semiconductors NDI and PDI with p-type pyrene derivatives resulted in the formation of stable organogels, which was induced by the strong charge transfer (CT) interactions between acceptors and donors in chloroform. The dimension size of the aromatic core from the acceptors was found to have a significant impact on the organogels. The width of the fibers from CT gels with NDI is about twice that from gels with PDI. It was found that the acceptor NDI preferred an alternate stacking with donors, intercalated with each other via CT interactions. In contrast, the acceptor PDI preferred to stack among themselves within the assemblies and this arose from the stronger π-π interactions because they had larger aromatic cores than the acceptor NDI. The dimension size of the aromatic core has been proved to have a significant impact on the organogels. The substituent impact of the donors was also studied.

Remarkable Role of C-I···N Halogen Bonding in Thixotropic 'Halo'gel Formation

Halogen-bonding-induced self-assembly in the solution of equimolar mixtures of certain pyridyl-ended oligo p-phenylenevinylene (OPV)-derivatives with 1,4-diiodotetrafluorobenzene is reported. The mode of self-assembly, that is, cocrystallization, thixotropic gelation, or precipitation, depends strongly on the nature of chains (n-alkyl chains as a function of length or short oxyethylene chain) appended to the OPV-backbone as well as on the cooling rate of the corresponding hot solution. Single-crystal X-ray diffraction studies of the cocrystals reveal the "infinite" chain formation via C-I···N halogen-bonding interactions between the two components. In addition, multiple noncovalent interactions induce cross-links among these halogen-bonded "infinite" chains. Interestingly, the molecular packing in the "Cogel" bearing OPV-derivative with oxyethylene chains is found to be very similar to that of the cocrystal of the same.

Substituent Effects on the Self-Assembly/Coassembly and Hydrogelation of Phenylalanine Derivatives

Supramolecular hydrogels derived from the self-assembly of organic molecules have been exploited for applications ranging from drug delivery to tissue engineering. The relationship between the structure of the assembly motif and the emergent properties of the resulting materials is often poorly understood, impeding rational approaches for the creation of next-generation materials. Aromatic π-π interactions play a significant role in the self-assembly of many supramolecular hydrogelators, but the exact nature of these interactions lacks definition. Conventional models that describe π-π interactions rely on quadrupolar electrostatic interactions between neighboring aryl groups in the π-system. However, recent experimental and computational studies reveal the potential importance of local dipolar interactions between elements of neighboring aromatic rings in stabilizing π-π interactions. Herein, we examine the nature of π-π interactions in the self- and coassembly of Fmoc-Phe-derived hydrogelators by systematically varying the electron-donating or electron-withdrawing nature of the side chain benzyl substituents and correlating these effects to the emergent assembly and gelation properties of the systems. These studies indicate a significant role for stabilizing dipolar interactions between neighboring benzyl groups in the assembled materials. Additional evidence for specific dipolar interactions is provided by high-resolution crystal structures obtained from dynamic transition of gel fibrils to crystals for several of the self-assembled/coassembled Fmoc-Phe derivatives. In addition to electronic effects, steric properties also have a significant effect on the interaction between neighboring benzyl groups in these assembled systems. These findings provide significant insight into the structure-function relationship for Fmoc-Phe-derived hydrogelators and give cues for the design of next-generation materials with desired emergent properties.

Efficient ambipolar transport properties in alternate stacking donor–acceptor complexes: from experiment to theory

Comprehensive investigations of crystal structures, electrical transport properties and theoretical simulations have been performed over a series of donor–acceptor complexes.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Autoresolution of Segregated and Mixed p-n Stacks by Stereoselective Supramolecular Polymerization in Solution

A "chirality driven self-sorting" strategy is introduced for the controlled supramolecular organization of donor (D) and acceptor (A) molecules in multicomponent assemblies. The trans-1,2-bis(amido)cyclohexane (trans-BAC) has been identified as a supramolecular motif with strong homochiral recognition to direct this chirality controlled assembly process of enantiomers in solution. Stereoselective supramolecular polymerization of trans-BAC appended naphthalene diimide monomers (NDIs) has been probed in detail by spectroscopic and mechanistic investigations. This chirality-driven self-sorting design of enantiomeric components also offers to realize mixed and segregated D-A stacks by supramolecular co-assembly of the NDI acceptors with trans-BAC appended dialkoxynaphthalene (DAN) donor monomers. Such an unprecedented chirality control on D-A organization paves the way for the creation of supramolecular p-n nanostructures with controlled molecular-level organization.

Supramolecular block copolymers by kinetically controlled co-self-assembly of planar and core-twisted perylene bisimides

New synthetic methodologies for the formation of block copolymers have revolutionized polymer science within the last two decades. However, the formation of supramolecular block copolymers composed of alternating sequences of larger block segments has not been realized yet. Here we show by transmission electron microscopy (TEM), 2D NMR and optical spectroscopy that two different perylene bisimide dyes bearing either a flat (A) or a twisted (B) core self-assemble in water into supramolecular block copolymers with an alternating sequence of (A_mBB)_n. The highly defined ultralong nanowire structure of these supramolecular copolymers is entirely different from those formed upon self-assembly of the individual counterparts, that is, stiff nanorods (A) and irregular nanoworms (B), respectively. Our studies further reveal that the as-formed supramolecular block copolymer constitutes a kinetic self-assembly product that transforms into thermodynamically more stable self-sorted homopolymers upon heating.

Block co-polymers are becoming of ever-increasing importance in polymer science. Here, the authors show that the co-assembly of two perylene bisimide dyes leads to supramolecular block copolymer structures with a regular alternating sequence of short blocks of respective homoaggregates.

Multicomponent low molecular weight gelators

We discuss the potential and challenges of multicomponent low molecular weight gels.

Selective sensing of citrate by a supramolecular ensemble formed by a phenazine copper(i) complex and a perylene diimide derivative

A PET based “off–on” fluorescent sensor for citrate has been developed, displaying low interference by other α-hydroxycarboxylates, dicarboxylates and monosaccharides.

Remarkable enhancement of ambient-air electrical conductivity of the perylenediimide π-stacks isolated in the flexible films of a hydrogen-bonded polymer

N,N′-di(2-(trimethylammoniumiodide)ethylene) perylenediimide (TAIPDI), forming extensive π-stacks through the strong π–π interactions of large π-planes, was isolated in the hydrogen-bonding milieu of polyvinyl alcohol (PVA) from aqueous solutions.

Nucleotide sensing with a perylene-based molecular receptor via amplified fluorescence quenching

A competitive fluorescence assay of perylene-based molecular receptors has been established, and selective detection of UTP is achieved through improved aggregation arising from the specific interaction of perylene-tethered guanidinium with uridine and phosphate groups in UTP.

Design of nanostructures based on aromatic peptide amphiphiles

Aromatic peptide amphiphiles are gaining popularity as building blocks for the bottom-up fabrication of nanomaterials, including gels. These materials combine the simplicity of small molecules with the versatility of peptides, with a range of applications proposed in biomedicine, nanotechnology, food science, cosmetics, etc. Despite their simplicity, a wide range of self-assembly behaviours have been described. Due to varying conditions and protocols used, care should be taken when attempting to directly compare results from the literature. In this review, we rationalise the structural features which govern the self-assembly of aromatic peptide amphiphiles by focusing on four segments, (i) the N-terminal aromatic component, (ii) linker segment, (iii) peptide sequence, and (iv) C-terminus. It is clear that the molecular structure of these components significantly influences the self-assembly process and resultant supramolecular architectures. A number of modes of assembly have been proposed, including parallel, antiparallel, and interlocked antiparallel stacking conformations. In addition, the co-assembly arrangements of aromatic peptide amphiphiles are reviewed. Overall, this review elucidates the structural trends and design rules that underpin the field of aromatic peptide amphiphile assembly, paving the way to a more rational design of nanomaterials based on aromatic peptide amphiphiles.