Diol-Linked Microporous Networks of Cubic Siloxane Cages

Direct cross-linking of silyl-functionalized cage siloxanes via nonhydrolytic siloxane bond formation for preparing nanoporous materials

Bottom-up synthesis of siloxane-based nanoporous materials from siloxane oligomers is promising for constructing well-defined structures at a molecular level. Herein, we report the synthesis of nanoporous materials consisting of cage-type siloxanes through the nonhydrolytic siloxane bond formation reaction. Cage siloxanes with double-n-ring geometries (n = 4 or 6) modified with dimethylsilyl and dimethylethoxysilyl groups are synthesized and directly cross-linked using a B(C6F5)3 catalyst, resulting in the formation of porous networks composed of alternating cage siloxane nodes and tetramethyldisiloxane (-SiMe2OSiMe2-) linkers. Compared with conventional hydrolysis and polycondensation reactions of alkoxysilyl-modified cage siloxanes under acid conditions, the non-hydrolytic condensation reaction was found favorable for the formation of porous siloxane networks without unwanted cleavage of the siloxane bonds.

Variation of counter quaternary ammonium cations of anionic cage germanoxanes as building blocks of nanoporous materials

Double-four ring (D4R)-type cage germanoxanes, having a fluoride anion in the cage, contain organic ammonium cations as counter cations outside the cage, and they are attractive as unique nano-building blocks of anionic porous materials. Although the variety of counter cations directly included in the cage germanoxane synthesis is limited, this study demonstrates that other tetraalkylammonium cations can be introduced by cation exchange in both discrete and cross-linked states. Tetraethylammonium (TEA) of a discrete cage germanoxane was replaced with tetrabutylammonium (TBA) in an organic solvent, which provides another starting material. TEA and TBA cations in cross-linked networks formed by hydrosilylation reactions of dimethylvinylsilylated cage germanoxanes with various oligosiloxanes as linkers were exchanged with tetramethylammonium (TMA) cations. The variation in the pore volume, which depends on the type of introduced counter cations and oligosiloxane linkers, is verified. In terms of bottom-up synthesis of nanoporous materials from cage-type germanoxanes, the selection of both the counter cation and cross-linker is important to vary the porosity.

Synthesis and crystal structure of double-three ring (D3R)-type cage siloxanes modified with dimethylsilanol groups

The controlled assembly of molecular building blocks enables the rational design of nanomaterials. In this study, two types of cage-type oligosiloxanes with double-three ring (D3R) structures are modified with dimethylsilanol groups to form supramolecular assemblies. One is the siloxane cage derived from Si(OEt)4 (denoted as the Q6 cage), and the other is the organosiloxane cage derived from (EtO)3Si-CH2-Si(OEt)3 (denoted as the T6 cage). The syntheses of the silanol-modified cages are performed in two steps: (i) dimethylsilylation of the corner Si-O- groups on the Q6 and T6 cages to introduce Si-H groups and (ii) subsequent oxidation of the Si-H groups to Si-OH groups. Dimethylsilylation of the cages is conducted at much lower temperatures (-94 and -78 °C for Q6 and T6 cages, respectively) than those used for conventional silylation, which is the key to suppressing the deterioration of the unstable D3R structure. The subsequent oxidation of the Si-H groups proceeds successfully, and the crystallization of these molecules is induced by the hydrogen bonds of the silanol groups. The crystal structure of the Q6 cage modified with dimethylsilanol groups can be regarded as a layered structure with tetrahydrofuran between the layers. In contrast, the T6 cage modified with dimethylsilanol groups assembled to form a more densely packed structure with no included solvent molecules. The differences between the crystal structures are discussed in terms of the shape of the cages. The insight into the effect of the shape of the cage on its assembly behavior will lead to the designable synthesis of crystalline siloxane-based materials.

Strong Graphene 3D Assemblies with High Elastic Recovery and Hardness

The rational design and construction of 3D graphene assemblies is a crucial step to extend the graphene properties for practical applications. Here, a novel interfacially reactive self-assembling process is reported to prepare well-organized 3D honeycomb-like graphene assemblies with unique polygonal nanopores interconnected by silicon-oxygen chemical bonds. The newly developed silicate-bridged graphene assembly (SGA) exhibits an exceptionally high hardness of 13.09 GPa, outperforming all existing 3D graphene materials, while maintains high Young's modulus (162.96 GPa), elastic recovery (75.27%), and superb thermal stability (600 °C in air). The observed unusual merits are resulted from unique pore structure combining the mechanical stability of the trihedral-nanopore structure and the deformability of the other polygonal nanopores. As a filling material, a merely 0.05% (w/w) addition of SGA could double the impact resistance of unsaturated resins (e.g., polyester). While SGA is attractive for various applications, including body armors, wearable electronics, space elevators, and multifunctional reinforcement fibers for automobiles, and aerospace vehicles, the novel liquid sodium-water interfacial reactive self-assembling developed in this study could open avenues for further development of various well-defined 3D assemblies from graphene and many other materials.

Organosilica hybrid nanomaterials with a high organic content: syntheses and applications of silsesquioxanes

Organic-inorganic hybrid materials garner properties from their organic and inorganic matrices as well as synergistic features, and therefore have recently attracted much attention at the nanoscale. Non-porous organosilica hybrid nanomaterials with a high organic content such as silsesquioxanes (R-SiO_1.5, with R organic groups) and bridged silsesquioxanes (O_1.5Si-R-SiO_1.5) are especially attractive hybrids since they provide 20 to 80 weight percent of organic functional groups in addition to the known chemistry and stability of silica. In the organosilica family, silsesquioxanes (R-SiO_1.5) stand between silicas (SiO₂) and silicones (R₂SiO), and are variously called organosilicas, ormosil (organically-modified silica), polysilsesquioxanes and silica hybrids. Herein, we comprehensively review non-porous silsesquioxane and bridged silsesquioxane nanomaterials and their applications in nanomedicine, electro-optics, and catalysis.

Tunable Gravimetric and Volumetric Hydrogen Storage Capacities in Polyhedral Oligomeric Silsesquioxane Frameworks

We study the hydrogen adsorption in porous frameworks composed of silsesquioxane cages linked via boron substituted aromatic structures by first-principles modeling. Such polyhedral oligomeric silsesquioxane (POSS) frameworks can be further modified by decorating them with metal atoms binding to the ring structures of the linkers. We have considered Sc- and Ti-doped frameworks which bind H2 via so-called Kubas interaction between hydrogen molecules and transition metal atoms. It will be demonstrated that the maximum H2 gravimetric capacity can be improved to more than 7.5 wt % by using longer linkers with more ring structures. However, the maximum H2 volumetric capacity can be tuned to more than 70 g/L by varying the size of silsesquioxane cages. We are optimistic that by varying the building blocks, POSS frameworks can be modified to meet the targets for the gravimetric and volumetric capacities set by the U.S. Department of Energy.

Hybrid nanoporous polystyrene derived from cubic octavinylsilsesquioxane and commercial polystyrene via the Friedel–Crafts reaction

A series of POSS-based nanoporous materials were prepared from commercial polystyrene and octavinylsilsesquioxane via the Friede–Crafts reaction.

Electrospun aggregation-induced emission active POSS-based porous copolymer films for detection of explosives

Electrospun AIE-active POSS-based copolymer films exhibit an approximately 9-fold increase in response to explosive vapors compared to dense films.