N-Doped Graphene Derived from Biomass as a Visible-Light Photocatalyst for Hydrogen Generation from Water/Methanol Mixtures

MOFs as Versatile Catalysts: Synthesis Strategies and Applications in Value-Added Compound Production

Catalysts played a crucial role in advancing modern human civilization, from ancient times to the industrial revolution. Due to high cost and limited availability of traditional catalysts, there is a need to develop cost-effective, high-activity, and nonprecious metal-based electrocatalysts. Metal-organic frameworks (MOFs) have emerged as an ideal candidate for heterogeneous catalysis due to their physicochemical properties, hybrid inorganic/organic structures, uncoordinated metal sites, and accessible organic sections. MOFs are high nanoporous crystalline materials that can be used as catalysts to facilitate polymerization reactions. Their chemical and structural diversity make them effective for various reactions compared to traditional catalysts. MOFs have been applied in gas storage and separation, ion-exchange, drug delivery, luminescence, sensing, nanofilters, water purification, and catalysis. The review focuses on MOF-enabled heterogeneous catalysis for value-added compound production, including alcohol oxidation, olefin oligomerization, and polymerization reactions. MOFs offer tunable porosity, high spatial density, and single-crystal XRD control over catalyst properties. In this review, MOFs were focused on reactions of CO2 fixation, CO2 reduction, and photoelectrochemical water splitting. Overall, MOFs have great potential as versatile catalysts for diverse applications in the future.

An Overview on Exploitation of Graphene-Based Membranes: From Water Treatment to Medical Industry, Including Recent Fighting against COVID-19

Graphene and its derivatives have lately been the subject of increased attention for different environmental applications of membrane technology such as water treatment and air filtration, exploiting their antimicrobial and antiviral activity. They are interesting candidates as membrane materials for their outstanding mechanical and chemical stability and for their thin two-dimensional (2D) nanostructure with potential pore engineering for advanced separation. All these applications have evolved and diversified from discovery to today, and now graphene and graphene derivatives also offer fascinating opportunities for the fight against infective diseases such as COVID-19 thanks to their antimicrobial and antiviral properties. This paper presents an overview of graphene-based 2D materials, their preparation and use as membrane material for applications in water treatment and in respiratory protection devices.

An Insight into Carbon Nanomaterial-Based Photocatalytic Water Splitting for Green Hydrogen Production

At present, the energy shortage and environmental pollution are the burning global issues. For centuries, fossil fuels have been used to meet worldwide energy demand. However, thousands of tons of greenhouse gases are released into the atmosphere when fossil fuels are burned, contributing to global warming. Therefore, green energy must replace fossil fuels, and hydrogen is a prime choice. Photocatalytic water splitting (PWS) under solar irradiation could address energy and environmental problems. In the past decade, solar photocatalysts have been used to manufacture sustainable fuels. Scientists are working to synthesize a reliable, affordable, and light-efficient photocatalyst. Developing efficient photocatalysts for water redox reactions in suspension is a key to solar energy conversion. Semiconductor nanoparticles can be used as photocatalysts to accelerate redox reactions to generate chemical fuel or electricity. Carbon materials are substantial photocatalysts for total WS under solar irradiation due to their high activity, high stability, low cost, easy production, and structural diversity. Carbon-based materials such as graphene, graphene oxide, graphitic carbon nitride, fullerenes, carbon nanotubes, and carbon quantum dots can be used as semiconductors, photosensitizers, cocatalysts, and support materials. This review comprehensively explains how carbon-based composite materials function as photocatalytic semiconductors for hydrogen production, the water-splitting mechanism, and the chemistry of redox reactions. Also, how heteroatom doping, defects and surface functionalities, etc., can influence the efficiency of carbon photocatalysts in H2 production. The challenges faced in the PWS process and future prospects are briefly discussed.

Biomass-Derived Carbon Materials in Heterogeneous Catalysis: A Step towards Sustainable Future

Biomass-derived carbons are emerging materials with a wide range of catalytic properties, such as large surface area and porosity, which make them ideal candidates to be used as heterogeneous catalysts and catalytic supports. Their unique physical and chemical properties, such as their tunable surface, chemical inertness, and hydrophobicity, along with being environmentally friendly and cost effective, give them an edge over other catalysts. The biomass-derived carbon materials are compatible with a wide range of reactions including organic transformations, electrocatalytic reactions, and photocatalytic reactions. This review discusses the uses of materials produced from biomass in the realm of heterogeneous catalysis, highlighting the different types of carbon materials derived from biomass that are potential catalysts, and the importance and unique properties of heterogeneous catalysts with different preparation methods are summarized. Furthermore, this review article presents the relevant work carried out in recent years where unique biomass-derived materials are used as heterogeneous catalysts and their contribution to the field of catalysis. The challenges and potential prospects of heterogeneous catalysis are also discussed.

Upcycling of Plastic Wastes and Biomass for Sustainable Graphitic Carbon Production: A Critical Review

Upcycling of waste plastics diverts plastics from landfill, which helps in reducing greenhouse gas emissions. Graphitic carbon is an interesting material with a wide range of applications in electronics, energy storage, fuel cells, and even as advanced fillers for polymer composites. It is a very strong and highly conductive material consisting of weakly bound graphene layers arranged in a hexagonal structure. There are different ways of synthesizing graphitic carbons, of which the co-pyrolysis of biomass and plastic wastes is a promising approach for large-scale production. Highly graphitized carbon with surface areas in the range of 201 m²/g was produced from the co-pyrolysis of polyethylene and pinewood at 600 °C. Similarly, porous carbon having a superior discharge capacity (290 mAh/g) was developed from the co-pyrolysis of sugar cane and plastic polymers with catalysts. The addition of plastic wastes including polyethylene and high-density polyethylene to the pyrolysis of biomass tends to increase the surface area and improve the discharge capacity of the produced graphitic carbons. Likewise, temperature plays an important role in enhancing the carbon content and thereby the quality of the graphitic carbon during the co-pyrolysis process. The application of metal catalysts can reduce the graphitization temperature while at the same time improve the quality of the graphitic carbon by increasing the carbon contents. This work reports some typical graphitic carbon preparation methods from the co-pyrolysis of biomass and plastic wastes for the first time including thermochemical methods, exfoliation methods, template-based production methods, and salt-based methods. The factors affecting the graphitic char quality during the conversion processes are reviewed critically. Moreover, the current state-of-the-art characterization technologies such as Raman, scanning electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy are discussed in detail, and finally, an overview on the applications, scalability, and future trends of graphitic-like carbons is highlighted.

High C2-C4 selectivity in CO2 hydrogenation by particle size control of Co-Fe alloy nanoparticles wrapped on N-doped graphitic carbon

A catalyst based on first-row Fe and Co with a record of 51% selectivity to C₂-C₄ hydrocarbons at 36% CO₂ conversion is disclosed. The factors responsible for the C₂₊ selectivity are a narrow Co-Fe particle size distribution of about 10 nm and embedment in N-doped graphitic matrix. These hydrogenation catalysts convert CO₂ into C₂-C₄ hydrocarbons, including ethane, propane, n-butane, ethylene and propylene together with methane, CO. Selectivity varies depending on the catalyst, CO₂ conversion, and the operation conditions. Operating with an H₂/CO₂ ratio of 4 at 300°C and pressure on 5 bar, a remarkable combined 30% of ethylene and propylene at 34% CO₂ conversion was achieved. The present results open the way to develop an economically attractive process for CO₂ reduction leading to products of higher added value and longer life cycles with a substantial selectivity.

•

Co-Fe nanoparticles wrapped on N-doped graphitic carbon catalyzes CO₂ hydrogenation

•

Co-Fe@(N)Carbon affords 51% selectivity to C₂-C₄ hydrocarbons at 36% CO₂ conversion

•

At H₂/CO₂ 4, 300°C and 5 bar, a combined 30% of CH₂ = CH₂ and MeCH = CH₂ is achieved

•

Particle size (10 nm) and N-doping are crucial to achieve high C₂₊ selectivity

Hydrogen Production as a Clean Energy Carrier through Heterojunction Semiconductors for Environmental Remediation

Today, as a result of the advancement of technology and increasing environmental problems, the need for clean energy has considerably increased. In this regard, hydrogen, which is a clean and sustainable energy carrier with high energy density, is among the well-regarded and effective means to deliver and store energy, and can also be used for environmental remediation purposes. Renewable hydrogen energy carriers can successfully substitute fossil fuels and decrease carbon dioxide (CO2) emissions and reduce the rate of global warming. Hydrogen generation from sustainable solar energy and water sources is an environmentally friendly resolution for growing global energy demands. Among various solar hydrogen production routes, semiconductor-based photocatalysis seems a promising scheme that is mainly performed using two kinds of homogeneous and heterogeneous methods, of which the latter is more advantageous. During semiconductor-based heterogeneous photocatalysis, a solid material is stimulated by exposure to light and generates an electron–hole pair that subsequently takes part in redox reactions leading to hydrogen production. This review paper tries to thoroughly introduce and discuss various semiconductor-based photocatalysis processes for environmental remediation with a specific focus on heterojunction semiconductors with the hope that it will pave the way for new designs with higher performance to protect the environment.

Baldovi H, Dhakshinamoorthy A, Primo A, Garcia H. Tridimensional N, P-Codoped Carbon Sponges as Highly Selective Catalysts for Aerobic Oxidative Coupling of Benzylamine

Two tridimensional N-doped porous carbon sponges (3DC-X) have been prepared by using cetyltrimethylammonium chloride (CTAC) and cetyltrimethylammonium bromide (CTAB) as soft templates and alginate to replicate the liquid crystals formed by CTA⁺ in water. Alginate is a filmogenic polysaccharide of natural origin having the ability to form nanometric defectless films around objects. Subsequent pyrolysis at 900 °C under an Ar flow of the resulting CTA⁺-polysaccharide assemblies result in 3DC-1 and 3DC-2, with the N percentages of 0.48 and 0.36 wt % for the materials resulting from CTAC and CTAB, respectively. Another four 3DC materials were obtained via pyrolysis of the adduct of phytic acid and chitosan, rendering an amorphous, N and P-codoped carbon sample (3DC-3 to 3DC-6). The six 3DC samples exhibit a large area (>650 m² × g^-1) and porosity, as determined by Ar adsorption. The catalytic activity of these materials in promoting the aerobic oxidation of benzylamine increases with the specific surface area and doping, being the largest for 3DC-4, which is able to achieve 73% benzylamine conversion to N-benzylidene benzylamine in solventless conditions at 70 °C in 5 h. Quenching studies and hot filtration tests indicate that 3DC-4 acts as a heterogeneous catalyst rather than an initiator, triggering the formation of hydroperoxyl and hydroxyl radicals as the main reactive oxygen species involved in the aerobic oxidation.

Evaluation of N doped rGO-ZnO-CoPc(COOH)8 nanocomposite in cyanide degradation and its bactericidal activities

In the present study, an attempt has been made to design a solar light driven N-rGO-ZnO- CoPc(COOH)₈ nanocomposite for the degradation of cyanide. The morphological and structural characterization of the synthesized nanocomposite was performed by XRD, FT-IR, XPS, UV-vis DRS, FESEM, TEM, EDS, PL spectra and BET surface area. The results revealed that almost 91% degradation and 86% toxicity removal occurred at 25 mgL^-1 of initial cyanide concentration by the N-rGO-ZnO-CoPc(COOH)₈ nanocomposite under illumination of solar light within 120 min. Analysis of free radicals reveals that the generation of OH^. radicals was the predominant species in the photocatalytic degradation process. The cyanide degradation follows pseudo-first order kinetics. The estimated apparent rate constant (K_app) of the above nanocomposite was 3 times higher than that of the ZnO photocatalyst alone together with a very good recycle activities. This might be due to the application of metallpthalocyanine photosensitizer CoPc(COOH)₈ which enhances the rate of visible light absorption efficiency and activates the higher band gap ZnO photocatalyst under visible light. In addition, the presence of residual oxygen in N-rGO also promotes nucleation and anchor sites for interfacial contact between ZnO and N-rGO for effective charge transfer. Further, the N-rGO-ZnO-CoPc(COOH)₈ photocatalytic system showed significant antibacterial activities against mixed culture systems. Therefore, the N-rGO-ZnO-CoPc(COOH)₈ nanocomposite may be an alternative solar light driven photocatalyst system for the removal of cyanide from the wastewater along with its strong disinfectant activities.

Band Engineering of Semiconducting Microporous Graphitic Carbons by Phosphorous Doping: Enhancing of Photocatalytic Overall Water Splitting

Carbon-based solar photocatalysts for overall water splitting could provide H₂ as an energy vector in a clean and sustainable way. Band engineering to align energy levels can be achieved, among other ways, by doping. Herein, it is shown that phosphorous doping of microporous graphitic carbons derived from pyrolysis of α-, β-, and γ-cyclodextrin increases the valence band edge energy of the material, and the energy value of the conduction band decreases with the P content. In this way, P doping increases the activity of these metal-free materials in photocatalytic overall water splitting under simulated sunlight and visible-light illumination. The optimal P-doped photocatalyst in the absence of any metal as a cocatalyst affords, after 4 h of irradiation with simulated sunlight, a H₂ production of 2.5 mmol of H₂ × g_catalyst^-1 in the presence of methanol as the sacrificial agent or 225 μmol of H₂ × g_catalyst^-1 from pure H₂O.

Roles of Graphene Oxide in Heterogeneous Photocatalysis

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

The Evolution of Photocatalytic Membrane Reactors over the Last 20 Years: A State of the Art Perspective

The research on photocatalytic membrane reactors (PMRs) started around the year 2000 with the study of wastewater treatment by degradation reactions of recalcitrant organic pollutants, and since then the evolution of our scientific knowledge has increased significantly, broadening interest in reactions such as the synthesis of organic chemicals. In this paper, we focus on some initial problems and how they have been solved/reduced over time to improve the performance of processes in PMRs. Some know-how gained during these last two decades of research concerns decreasing/avoiding the degradation of the polymeric membranes, improving photocatalyst reuse, decreasing membrane fouling, enhancing visible light photocatalysts, and improving selectivity towards the reaction product(s) in synthesis reactions (partial oxidation and reduction). All these aspects are discussed in detail in this review. This technology seems quite mature in the case of water and wastewater treatment using submerged photocatalytic membrane reactors (SPMRs), while for applications concerning synthesis reactions, additional knowledge is required.

Porous Graphitic Carbons Containing Nitrogen by Structuration of Chitosan with Pluronic P123

Using Pluronic P123 as a structure-directing agent and chitosan as a carbon precursor, different porous carbons with remarkable morphologies such as orthohedra or spheres with diametrically opposite holes are obtained. These particles of micrometric size are constituted by the stacking of thin sheets (60 nm) that become increasingly bent in the opposite sense, concave in the upper and convex in the bottom hemispheres, as the chitosan proportion increases. TEM images, after dispersion of the particles by sonication, show that besides micrometric graphene sheets, the material is constituted by nanometric onion-like carbons. The morphology and structure of these porous carbons can be explained based on the ability of Pluronic P123 to undergo self-assembly in aqueous solution due to its amphoteric nature and the filmogenic properties of chitosan to coat Pluronic P123 nanoobjects undergoing structuration and becoming transformed into nitrogen-doped graphitic carbons. XPS analysis reveals the presence of nitrogen in their composition. These porous carbons exhibit a significant CO2 adsorption capacity of above 3 mmol g-1 under 100 kPa at 273 K attributable to their large specific surface area, ultraporosity, and the presence of basic N sites. In addition, the presence of dopant elements in the graphitic carbons opening the gap is responsible for the photocatalytic activity for H2 generation in the presence of sacrificial electron donors, reaching a H2 production of 63 μmol g-1 in 24 h.

Design, Fabrication, and Mechanism of Nitrogen-Doped Graphene-Based Photocatalyst

Solving energy and environmental problems through solar-driven photocatalysis is an attractive and challenging topic. Hence, various types of photocatalysts have been developed successively to address the demands of photocatalysis. Graphene-based materials have elicited considerable attention since the discovery of graphene. As a derivative of graphene, nitrogen-doped graphene (NG) particularly stands out. Nitrogen atoms can break the undifferentiated structure of graphene and open the bandgap while endowing graphene with an uneven electron density distribution. Therefore, NG retains nearly all the advantages of original graphene and is equipped with several novel properties, ensuring infinite possibilities for NG-based photocatalysis. This review introduces the atomic and band structures of NG, summarizes in situ and ex situ synthesis methods, highlights the mechanism and advantages of NG in photocatalysis, and outlines its applications in different photocatalysis directions (primarily hydrogen production, CO₂ reduction, pollutant degradation, and as photoactive ingredient). Lastly, the central challenges and possible improvements of NG-based photocatalysis in the future are presented. This study is expected to learn from the past and achieve progress toward the future for NG-based photocatalysis.

Visible-Light Photocatalysts and Their Perspectives for Building Photocatalytic Membrane Reactors for Various Liquid Phase Chemical Conversions

Photocatalytic organic synthesis/conversions and water treatment under visible light are a challenging task to use renewable energy in chemical transformations. In this review a brief overview on the mainly employed visible light photocatalysts and a discussion on the problems and advantages of Vis-light versus UV-light irradiation is reported. Visible light photocatalysts in the photocatalytic conversion of CO2, conversion of acetophenone to phenylethanol, hydrogenation of nitro compounds, oxidation of cyclohexane, synthesis of vanillin and phenol, as well as hydrogen production and water treatment are discussed. Some applications of these photocatalysts in photocatalytic membrane reactors (PMRs) for carrying out organic synthesis, conversion and/or degradation of organic pollutants are reported. The described cases show that PMRs represent a promising green technology that could shift on applications of industrial interest using visible light (from Sun) active photocatalysts.

Carbon-based nanomaterials: in the quest of alternative metal-free photocatalysts for solar water splitting

One of the alarming problems of modern civilization is global warming due to the inevitable rise of CO2 in the environment, mainly because of the excessive use of traditional fossil fuels. The gradual depletion of fossil fuels is another challenge regarding the future energy demand; therefore, alternative renewable energy research is necessary. One of the alternative approaches is the solar fuel generation by means of photocatalytic water splitting and more specifically, hydrogen evolution from water through the reductive half-reaction. Hydrogen is the cleanest fuel and does not produce any greenhouse gas upon direct combustion, or even while acting as a chemical feedstock for other transportable fuel generation. Therefore, it is desirable to produce efficient photocatalysts for solar water splitting. After the discovery of the first photocatalytic water splitting reaction by Fujisima and Honda, several advancements have been made with metal-based inorganic semiconductor photo-catalysts. However, their practical applicability is still under debate considering the environmental sustainability, stability and economical expenses. As a result, it is essential to develop alternate photocatalysts that are environmentally sustainable, cost-effective, stable and highly efficient. The metal-free approach is one of the most promising approaches in this regard. Herein, we discuss the recent developments in carbon-based materials and their hybrids as alternative metal free photocatalysts for solar water splitting. The present discussion includes g-C3N4, two-dimensional graphene/graphene oxides, one-dimensional carbon nanotubes/carbon nanofibers and zero-dimensional graphene QDs/carbon dots. We have focused on the rectification of exciton generation, charge separation and interfacial photochemical processes for photocatalysis, followed by possible optimization pathways of these typical all carbon-based materials. Finally, we have highlighted several fundamental challenges and their possible solutions, as well as the future direction on this particular aspect.

Recent Developments in Heterogeneous Catalytic Routes for the Sustainable Production of Succinic Acid from Biomass Resources

Succinic acid is a "hot molecule" identified by United States Department of Energy as a substitute for petrochemicals with great scope for its production from biomass. It is used as an intermediate for the production of a huge variety of everyday consumer products with an addressable market share of billions of dollars. Succinic acid and its derivatives are mainly used as pharmaceuticals, adhesives, solvents, intermediates for polymer synthesis, and food additives. Succinic acid is commercially produced from petrochemicals and there is a deficiency of economically viable catalytic processes for its large-scale production from biomass. Recently, a lot of biochemical routes have been devised to enhance its production from biomass resources, but such processes are time-consuming and involve tedious separation procedures. Therefore, this Review focuses on metal-based and metal-free heterogeneous catalytic routes for the synthesis of succinic acid from biomass derived products. The presence of uniform channels, cavities, active sites of various strengths, and the unique surface structure of the heterogeneous catalysts are a few of the interesting features that promote their use in industrial processes.

A 3D nitrogen-doped graphene aerogel for enhanced visible-light photocatalytic pollutant degradation and hydrogen evolution

The synergistic effect of the 3D structure and N-doping explain the high surface area of 536 m² g⁻¹ and excellent photocatalytic activity.

Metal-free photocatalysts for hydrogen evolution

This article provides a comprehensive review of the latest progress, challenges and recommended future research related to metal-free photocatalysts for hydrogen productionviawater-splitting.

Facile direct synthesis of graphene-wrapped ZnO nanospheres from cyanobacterial cells

Graphene-based composite materials are versatile but not easily procurable. Cyanobacterial cells, an outgrowth of eutrophic freshwater lake, were simultaneously employed as a template for the growth of ZnO nanoparticles and as a biomass carbon source for graphene sheets, resulting in chlorophyll-containing graphene-wrapped ZnO nanospheres.

Modulating charge carrier density and mobility in doped graphene by covalent functionalization

Covalent B-functionalization of B-doped graphene has been performed for the first time. The electronic properties and Hall effect of functionalized N- and B-doped graphene can be tuned by tailoring the electron-donating/-withdrawing properties of the organic addend.

Graphene-Based Materials as Efficient Photocatalysts for Water Splitting

Photocatalysis has been proposed as one of the most promising approaches for solar fuel production. Among the photocatalysts studied for water splitting, graphene and related materials have recently emerged as attractive candidates due to their striking properties and sustainable production when obtained from biomass wastes. In most of the cases reported so far, graphene has been typically used as additive to enhance its photocatalytic activity of semiconductor materials as consequence of the improved charge separation and visible light harvesting. However, graphene-based materials have demonstrated also intrinsic photocatalytic activity towards solar fuels production, and more specifically for water splitting. The photocatalytic activity of graphene derives from defects generated during synthesis or their introduction through post-synthetic treatments. In this short review, we aim to summarize the most representative examples of graphene based photocatalysts and the different approaches carried out in order to improve the photocatalytic activity towards water splitting. It will be presented that the introduction of defects in the graphenic lattice as well as the incorporation of small amounts of metal or metal oxide nanoparticles on the graphene surface improve the photocatalytic activity of graphene. What is more, a simple one-step preparation method has demonstrated to provide crystal orientation to the nanoparticles strongly grafted on graphene resulting in remarkable photocatalytic properties. These two features, crystal orientation and strong grafting, have been identified as a general methodology to further enhance the photocatalytic activity in graphenebased materials for water splitting. Finally, future prospects in this filed will be also commented.

Carbon-Based Photocathode Materials for Solar Hydrogen Production

Hydrogen is considered a promising environmentally friendly energy carrier for replacing traditional fossil fuels. In this context, photoelectrochemical cells effectively convert solar energy directly to H₂ fuel by water photoelectrolysis, thereby monolitically combining the functions of both light harvesting and electrolysis. In such devices, photocathodes and photoanodes carry out the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), respectively. Here, the focus is on photocathodes for HER, traditionally based on metal oxides, III-V group and II-VI group semiconductors, silicon, and copper-based chalcogenides as photoactive material. Recently, carbon-based materials have emerged as reliable alternatives to the aforementioned materials. A perspective on carbon-based photocathodes is provided here, critically analyzing recent research progress and outlining the major guidelines for the development of efficient and stable photocathode architectures. In particular, the functional role of charge-selective and protective layers, which enhance both the efficiency and the durability of the photocathodes, is discussed. An in-depth evaluation of the state-of-the-art fabrication of photocathodes through scalable, high-troughput, cost-effective methods is presented. The major aspects on the development of light-trapping nanostructured architectures are also addressed. Finally, the key challenges on future research directions in terms of potential performance and manufacturability of photocathodes are analyzed.

Solar Fuels by Heterogeneous Photocatalysis: From Understanding Chemical Bases to Process Development

The development of sustainable yet efficient technologies to store solar light into high energy molecules, such as hydrocarbons and hydrogen, is a pivotal challenge in 21st century society. In the field of photocatalysis, a wide variety of chemical routes can be pursued to obtain solar fuels but the two most promising are carbon dioxide photoreduction and photoreforming of biomass-derived substrates. Despite their great potentialities, these technologies still need to be improved to represent a reliable alternative to traditional fuels, in terms of both catalyst design and photoreactor engineering. This review highlights the chemical fundamentals of different photocatalytic reactions for solar fuels production and provides a mechanistic insight on proposed reaction pathways. Also, possible cutting-edge strategies to obtain solar fuels are reported, focusing on how the chemical bases of the investigated reaction affect experimental choices.

Catalyst-free one step synthesis of large area vertically stacked N-doped graphene-boron nitride heterostructures from biomass source

A procedure for the one-step preparation of films of few-layer N-doped graphene on top of nanometric hexagonal boron nitride sheets ((N)graphene/h-BN) based on the pyrolysis at 900 °C under an inert atmosphere of a film of chitosan containing about 20 wt% of ammonium borate salt as a precursor is reported. During the pyrolysis a spontaneous segregation of (N)graphene and boron nitride layers takes place. The films were characterized by optical microscopy that shows a thin graphene overlayer covering the boron nitride layer, the latter showing characteristic cracks, and by XPS measurements at different monitoring angles from 0° to 50° where an increase in the proportion of C vs. B and N was observed. The resulting (N)graphene/h-BN films were also characterized by Raman, HRTEM, SEM, FIB-SEM and AFM. The thickness of the (N)graphene and h-BN layers can be controlled by varying the concentration of precursors and the spin coating rate and is typically below 5 nm. Electrical conductivity measurements using microelectrodes can cause the burning of the graphene layer at high intensities, while lower intensities show that (N)graphene/h-BN films behave as capacitors in the range of positive voltages.

The mechanism of photocatalytic CO2 reduction by graphene-supported Cu2O probed by sacrificial electron donors

Cu₂O nanoparticles (5 nm) adsorbed on defective graphene (Cu₂O/G, 1.74 wt%) is an efficient photocatalyst for CO₂ methanation in the presence of electron donors.

Insight into the Role of Size Modulation on Tuning the Band Gap and Photocatalytic Performance of Semiconducting Nitrogen-Doped Graphene

Considerable attention has been focused on transforming graphene (GR) into semiconducting GR by diverse strategies, which can perform as one type of promising photocatalyst toward various photoredox reactions. Herein, we report a facile alkali-assisted hydrothermal method for simultaneous tailoring of the lateral size of GR and nitrogen (N) doping into the GR matrix, by which small-sized N-doped GR (S-NGR) can be obtained. For comparison, large-sized N-doped GR (L-NGR) has also been achieved through the same hydrothermal treatment except for the addition of alkali. The photocatalytic activity test shows that S-NGR exhibits much higher activity than L-NGR toward the degradation of organic pollutants under visible-light irradiation. Structure-photoactivity correlation analysis and characterization suggest that the underlying origin for the significantly enhanced visible-light photoactivity of S-NGR in comparison with L-NGR can be assigned to the lateral size decrease in the NGR sheet, which is able to tune the band gap of semiconducting NGR, to facilitate the separation and transfer of photogenerated charge carriers, and to improve the adsorption capacity of NGR toward the reactant. It is expected that this work will cast new light on the judicious utilization of semiconducting GR with controlled size modulation and heteroatom doping to tune its physicochemical properties, thereby advancing further developments in the rational design of more efficient semiconducting GR materials for diverse applications in photocatalysis.

A Metal-Organic Framework Approach toward Highly Nitrogen-Doped Graphitic Carbon as a Metal-Free Photocatalyst for Hydrogen Evolution

Zeolitic imidazolate framework-8 (ZIF-8)-derived N-doped graphene analogous polyhedrons (ZNGs) obtained via the direct carbonation of ZIF-8 are applied to photocatalytic hydrogen evolution for the first time. The contents of different types of nitrogen atoms in ZNGs can be fine-tuned via the calcination temperature, which significantly influences the hydrogen evolution rate of the ZNGs.

Heteroatom Nitrogen- and Boron-Doping as a Facile Strategy to Improve Photocatalytic Activity of Standalone Reduced Graphene Oxide in Hydrogen Evolution

Owing to its superior properties and versatility, graphene has been proliferating the energy research scene in the past decade. In this contribution, nitrogen (N-) and boron (B-) doped reduced graphene oxide (rGO) variants were investigated as a sole photocatalyst for the green production of H₂ and their properties with respect to photocatalysis were elucidated for the first time. N- and B-rGOs were facilely prepared via the pyrolysis of graphene oxide with urea and boron anhydride as their respective dopant source. The pyrolysis temperature was varied (600-800 °C for N-rGO and 800-1000 °C for B-rGO) in order to modify dopant loading percentage (%) which was found to be influential to photocatalytic activity. N-rGO600 (8.26 N at%) and B-rGO1000 (3.59 B at%), which holds the highest at% from each of their party, exhibited the highest H₂ activity. Additionally, the effects of the nature of N and B bonding configuration in H₂ photoactivity were also examined. This study demonstrates the importance of dopant atoms in graphene, rendering doping as an effective strategy to bolster photocatalytic activity for standalone graphene derivative photocatalysts.

Energy storage applications of biomass-derived carbon materials: batteries and supercapacitors

Recent advances in the application of biomass-derived carbon materials in batteries and supercapacitors.

111 oriented gold nanoplatelets on multilayer graphene as visible light photocatalyst for overall water splitting

Development of renewable fuels from solar light appears as one of the main current challenges in energy science. A plethora of photocatalysts have been investigated to obtain hydrogen and oxygen from water and solar light in the last decades. However, the photon-to-hydrogen molecule conversion is still far from allowing real implementation of solar fuels. Here we show that 111 facet-oriented gold nanoplatelets on multilayer graphene films deposited on quartz is a highly active photocatalyst for simulated sunlight overall water splitting into hydrogen and oxygen in the absence of sacrificial electron donors, achieving hydrogen production rate of 1.2 mol_H2 per g_composite per h. This photocatalytic activity arises from the gold preferential orientation and the strong gold–graphene interaction occurring in the composite system.

A plethora of photocatalysts have been investigated in order to obtain solar fuels but the photon-to-hydrogen molecule conversion is generally remains low. Here the authors show that 111 facet oriented gold nanoplatelets on multilayer graphene films is an active photocatalyst for overall water splitting.