On the importance of decarbonylation as a side-reaction in the ruthenium-catalysed dehydrogenation of alcohols: a combined experimental and density functional study

Switching the hydrogenation selectivity of urea derivatives via subtly tuning the amount and type of additive in the catalyst system

Catalytic hydrogenation of urea derivatives is considered to be one of the most feasible methods for indirect reduction functionalization of CO2 and synthesis of valuable chemicals and fuels. Among value-added products, methylamines, formamides and methanol are highly attractive as important industrial raw materials. Herein, we report the highly selective catalytic hydrogenation of urea derivatives to N-monomethylamines for the first time. More importantly, two- and six-electron reduction products can be switched on/off by subtly tuning 0.5 mol% KOtBu (2% to 1.5%): when the molar ratio of KOtBu/(PPh3)3RuCl2 exceeds 2.0, it is favorable for the formation of two-electron reduction products (N-formamides), while when it is below 2.0, the two-electron reduction products are further hydrogenated to six-electron reduction products (N-monomethylamines and methanol). Furthermore, changing the type of additive can also regulate this interesting selectivity. Control experiments showed that this selectivity is achieved by regulating the acid-base environment of the reaction to control the fate of the common hemiaminal intermediate. A feasible mechanism is proposed based on mechanistic experiments and characterization. This method has the advantages of being simple, universal and highly efficient, and opens up a new synthesis strategy for the utilization of renewable carbon sources.

Hydrogenation of CO2 to MeOH Catalyzed by Highly Robust (PNNP)Ir Complexes Activated by Alkali Bases in Alcohol

Despite receiving significant attention, well-defined homogeneous complexes for hydrogenation of carbon dioxide (CO2) to methanol (MeOH) are scarce and suffer issues of low catalyst turnover numbers (TONs) at high catalyst concentrations and deactivation in the presence of CO and at elevated temperatures. Herein, we disclose a system deploying sterically demanded (PNNP)Ir complexes for a sustained activity for hydrogenation of CO2 to MeOH at temperatures ∼200 °C in an alcohol solvent. Through reaction optimization, we achieved a TON of ∼9000 for MeOH formation, which exceeds most active homogeneous systems reported to date, and robustness on par with or exceeding most reactive systems utilizing amine additives was demonstrated. The key to achieving sustained catalyst turnover for the system was utilizing a catalytic amount of an alkali base additive, which serves the dual purpose of facilitating more efficient outer-sphere reduction of CO2 and HCO2Et and enhancing the selectivity of MeOH over in situ formed CO.

Dehydrogenative Intramolecular Macrolactonization of Dihydroxy Compounds Using Ru-MACHO Catalyst

Herein, we have developed a new approach for the synthesis of 11 to 21-membered macrolactones via intramolecular dehydrogenative coupling of primary alcohols by using Ru-MACHO as a catalyst and Cs₂CO₃ as a base. This protocol generated 11-21-ring-sized macrocycles (26 derivatives), free from an external oxidant or an additive, eliminating stoichiometric reagents and producing only hydrogen as a byproduct.

Recent Advancement on Decarbonylation Reactions Assisted by Ru-complexes: Synthetic and Mechanistic Approach

This frontier article covers the recent advancements in the ruthenium complex catalysed decarbonylation reactions of different types of carbonyl compounds and provides a direction towards the mechanistic understanding involved in...

Acceptorless Dehydrogenation of Methanol to Carbon Monoxide and Hydrogen using Molecular Catalysts

The acceptorless dehydrogenation of methanol to carbon monoxide and hydrogen was investigated using homogeneous molecular complexes. Complexes of ruthenium and manganese comprising the MACHO ligand framework showed promising activities for this reaction. The molecular ruthenium complex [RuH(CO)(BH4 )(HN(C2 H4 PPh2 )2 )] (Ru-MACHO-BH) achieved up to 3150 turnovers for carbon monoxide and 9230 turnovers for hydrogen formation at 150 °C reaching pressures up to 12 bar when the decomposition was carried out in a closed vessel. Control experiments affirmed that the metal complex mediates the initial fast dehydrogenation of methanol to formaldehyde and methyl formate followed by subsequent slow decarbonylation. Depending on the catalyst and reaction conditions, the CO/H2 ratio in the gas mixture thus varies over a broad range from almost pure hydrogen to the stoichiometric limit of 1:2.

The role of oxygenated species in the catalytic self-coupling of MeOH on O pre-covered Au(111)

The oxidation of alcohols plays a central role in the valorisation of biomass, in particular when performed with a non-toxic oxidant such as O₂. Aerobic oxidation of methanol on gold has attracted attention lately and the main steps of its mechanism have been described experimentally. However, the exact role of O and OH on each elementary step and the effect of the interactions between adsorbates are still not completely understood. Here we investigate the mechanism of methanol oxidation to HCOOCH₃ and CO₂. We use Density Functional Theory (DFT) to assess the energetics of the underlying pathways, and subsequently build lattice kinetic Monte Carlo (kMC) models of increasing complexity, to elucidate the role of different oxygenates. Detailed comparisons of our simulation results with experimental temperature programmed desorption (TPD) spectra enable us to validate the mechanism and identify rate determining steps. Crucially, taking into account dispersion (van der Waals forces) and adsorbate-adsorbate lateral interactions are both important for reproducing the experimental data.

Catalyst carbonylation: a hidden, but essential, step in reaction initiation

This minireview documents cases where catalyst carbonylation can be detrimental, beneficial, or even essential in the activation and lifecycle of catalysis for hydrogen transfer reactions.

Formation of metallacarboxylic acids through Hieber base reaction. A density functional theory study

Using density functional theory (B97-D/ECP2/PCM//RI-BP86/ECP1 level), we have studied the effects of ligand variation on OH^- uptake by transition-metal carbonyls (Hieber base reaction), i.e., L_nM(CO) + OH^- → [L_nM(CO₂H)]^-, M = Fe, Ru, Os, L = CO, PMe₃, PF₃, py, bipy, Cl, H. The viability of this step depends notably on the nature of the co-ligands, and a large span of driving forces is predicted, ranging from ΔG = -144 kJ/mol to +122 kJ/mol. Based on evaluation of atomic charges from natural population analysis, it is the ability of the co-ligands to delocalize the additional negative charge (through their π-acidity) that is the key factor affecting the driving force for OH^- uptake. Implications for the design of new catalysts for water gas shift reaction are discussed. Graphical abstract ᅟ.

Insight into the mechanism of decarbonylation of methanol by ruthenium complexes; a deuterium labelling study

In the reaction of [RuHClP₃] (P = PPh₃) with NaOMe in methanol, the product is [RuH₂(CO)P₃] with RuH₄P₄.

Kinetics study of the Ru/C-catalysed hydrogenolysis of polyols – insight into the interactions with the metal surface

Kinetic analysis of stereoisomerization, decarbonylation and deoxygenation provides insight into the reactivity and dynamics of polyols on Ru-surfaces.

Reactivity of a Ruthenium-Carbonyl Complex in the Methanol Dehydrogenation Reaction

Finding new catalysts for the release of molecular hydrogen from methanol is of high relevance in the context of the development of sustainable energy carriers. Herein, we report that the ruthenium complex Ru(salbinapht)(CO)(Pi‐Pr₃) {salbinapht=2‐[({2′‐[(2‐hydroxybenzyl)amino]‐[1,1′‐binaphthalen]‐2‐yl}imino)methyl]phenolato} (2) catalyzes the methanol dehydrogenation reaction in the presence of base and water to yield H₂, formate, and carbonate. Dihydrogen is the only gas detected and a turnover frequency up to 55 h⁻¹ at 82 °C is reached. Complex 2 bears a carbonyl ligand that is derived from methanol, as is demonstrated by labeling experiments. The carbonyl ligand can be treated with base to form formate (HCOO⁻) and hydrogen. The nature of the active species is further shown not to contain a CO ligand but likely still possesses a salen‐derived ligand. During catalysis, formation of Ru(CO)₂(H)₂(P‐iPr₃)₂ is occasionally observed, which is also an active methanol dehydrogenation catalyst.

Upgrading ethanol to 1-butanol with a homogeneous air-stable ruthenium catalyst

An amide-derived N,N,N-Ru(ii) complex catalyzes the conversion of EtOH to 1-BuOH with high activity. Conversion to alcohol upgraded products exceeds 250 turnovers per hour (>50% conversion) with 0.1 mol% catalyst loading. In addition to high activity for ethanol upgrading, catalytic reactions can be set up under ambient conditions with no loss in activity.

Catalytic Conversion of Alcohols into Carboxylic Acid Salts in Water: Scope, Recycling, and Mechanistic Insights

The catalytic conversion of alcohols into carboxylic acid salts in water was performed in the presence of ruthenium complexes supported by aliphatic PNP pincer ligands preformed or formed in situ. High activity toward a wide substrate scope was achieved with turnover number values of up to 4000. The air-stable catalytic system can be recycled by using toluene as a catalyst-immobilizing phase; the activity is maintained after five consecutive runs. Finally, mechanistic studies allowed some fundamental aspects related to water activation to be unveiled and to the mechanism postulated.

Acetals from primary alcohols with the use of tridentate proton responsive phosphinepyridonate iridium catalysts

The association of the new phosphinepyridonate ligands along with an iridium metallic precursor resulted in the selective acetalization of various primary alcohols via a formal dehydrogenative coupling reaction.

Synthesis of a sterically bulky diphosphine synthon and Ru(ii) complexes of a cooperative tridentate enamide-diphosphine ligand platform

The preparation of the bulky diphosphine synthon 1 is described and used to generate a tridentate enamido diphosphine ligand platform that can be installed on Ru(ii).

Isomerisation versus carbonylative pathways in the hydroxy-carbonylation, methoxy-carbonylation, and amino-carbonylation of N-tosyl-3-pyrroline

DFT calculations show that the competition between carbonylation and isomerisation pathways using Pd/phosphine catalysts can be steered toward the desired carbonylation using less bulky ligands. Thus, the normally less effective phanephos family forms carbonylation products with good ee.

Can Contemporary Density Functional Theory Predict Energy Spans in Molecular Catalysis Accurately Enough To Be Applicable for in Silico Catalyst Design? A Computational/Experimental Case Study for the Ruthenium-Catalyzed Hydrogenation of Olefins

The catalytic hydrogenation of cyclohexene and 1-methylcyclohexene is investigated experimentally and by means of density functional theory (DFT) computations using novel ruthenium Xantphos(Ph) (4,5-bis(diphenylphosphino)-9,9-dimethylxanthene) and Xantphos(Cy) (4,5-bis(dicyclohexylphosphino)-9,9-dimethylxanthene) precatalysts [Ru(Xantphos(Ph))(PhCO2)(Cl)] (1) and [Ru(Xantphos(Cy))(PhCO2)(Cl)] (2), the synthesis, characterization, and crystal structures of which are reported. The intention of this work is to (i) understand the reaction mechanisms on the microscopic level and (ii) compare experimentally observed activation barriers with computed barriers. The Gibbs free activation energy ΔG(⧧) was obtained experimentally with precatalyst 1 from Eyring plots for the hydrogenation of cyclohexene (ΔG(⧧) = 17.2 ± 1.0 kcal/mol) and 1-methylcyclohexene (ΔG(⧧) = 18.8 ± 2.4 kcal/mol), while the Gibbs free activation energy ΔG(⧧) for the hydrogenation of cyclohexene with precatalyst 2 was determined to be 21.1 ± 2.3 kcal/mol. Plausible activation pathways and catalytic cycles were computed in the gas phase (M06-L/def2-SVP). A variety of popular density functionals (ωB97X-D, LC-ωPBE, CAM-B3LYP, B3LYP, B97-D3BJ, B3LYP-D3, BP86-D3, PBE0-D3, M06-L, MN12-L) were used to reoptimize the turnover determining states in the solvent phase (DF/def2-TZVP; IEF-PCM and/or SMD) to investigate how well the experimentally obtained activation barriers can be reproduced by the calculations. The density functionals B97-D3BJ, MN12-L, M06-L, B3LYP-D3, and CAM-B3LYP reproduce the experimentally observed activation barriers for both olefins very well with very small (0.1 kcal/mol) to moderate (3.0 kcal/mol) mean deviations from the experimental values indicating for the field of hydrogenation catalysis most of these functionals to be useful for in silico catalyst design prior to experimental work.

Experimental and theoretical mechanistic investigation of the iridium-catalyzed dehydrogenative decarbonylation of primary alcohols

The mechanism for the iridium-BINAP catalyzed dehydrogenative decarbonylation of primary alcohols with the liberation of molecular hydrogen and carbon monoxide was studied experimentally and computationally. The reaction takes place by tandem catalysis through two catalytic cycles involving dehydrogenation of the alcohol and decarbonylation of the resulting aldehyde. The square planar complex IrCl(CO)(rac-BINAP) was isolated from the reaction between [Ir(cod)Cl]2, rac-BINAP, and benzyl alcohol. The complex was catalytically active and applied in the study of the individual steps in the catalytic cycles. One carbon monoxide ligand was shown to remain coordinated to iridium throughout the reaction, and release of carbon monoxide was suggested to occur from a dicarbonyl complex. IrH2Cl(CO)(rac-BINAP) was also synthesized and detected in the dehydrogenation of benzyl alcohol. In the same experiment, IrHCl2(CO)(rac-BINAP) was detected from the release of HCl in the dehydrogenation and subsequent reaction with IrCl(CO)(rac-BINAP). This indicated a substitution of chloride with the alcohol to form a square planar iridium alkoxo complex that could undergo a β-hydride elimination. A KIE of 1.0 was determined for the decarbonylation and 1.42 for the overall reaction. Electron rich benzyl alcohols were converted faster than electron poor alcohols, but no electronic effect was found when comparing aldehydes of different electronic character. The lack of electronic and kinetic isotope effects implies a rate-determining phosphine dissociation for the decarbonylation of aldehydes.

Hydrogenation of carbon dioxide to methanol using a homogeneous ruthenium-Triphos catalyst: from mechanistic investigations to multiphase catalysis

The hydrogenation of CO₂ to methanol using a recyclable molecular organometallic catalyst in the absence of an alcohol additive is demonstrated for the first time.

The hydrogenation of CO₂ to methanol can be achieved using a single molecular organometallic catalyst. Whereas homogeneous catalysts were previously believed to allow the hydrogenation only via formate esters as stable intermediates, the present mechanistic study demonstrates that the multistep transformation can occur directly on the Ru–Triphos (Triphos = 1,1,1-tris(diphenylphosphinomethyl)ethane) centre. The cationic formate complex [(Triphos)Ru(η²-O₂CH)(S)]⁺ (S = solvent) was identified as the key intermediate, leading to the synthesis of the analogous acetate complex as a robust and stable precursor for the catalytic transformation. A detailed mechanistic study using DFT calculations shows that a sequential series of hydride transfer and protonolysis steps can account for the transformation of CO₂via formate/formic acid to hydroxymethanolate/formaldehyde and finally methanolate/methanol within the coordination sphere of a single Ru–Triphos-fragment. All experimental results of the systematic parameter optimisation are fully consistent with this mechanistic picture. Based on these findings, a biphasic system consisting of H₂O and 2-MTHF was developed, in which the active cationic Ru-complex resides in the organic phase for recycling and methanol is extracted with the aqueous phase.