Silicone Boronates Reversibly Crosslink Using Lewis Acid- Lewis Base Amine Complexes

Boron-Nitrogen Lewis Pairs in the Assembly of Supramolecular Macrocycles, Molecular Cages, Polymers, and 3D Materials

Covering an exceptionally wide range of bond strengths, the dynamic nature and facile tunability of dative B-N bonds is highly attractive when it comes to the assembly of supramolecular polymers and materials. This Minireview offers an overview of advances in the development of functional materials where Lewis pairs (LPs) play a key role in their assembly and critically influence their properties. Specifically, we describe the reversible assembly of linear polymers with interesting optical, electronic and catalytic properties, discrete macrocycles and molecular cages that take up diverse guest molecules and undergo structural changes triggered by external stimuli, covalent organic frameworks (COFs) with intriguing interlocked structures that can embed and separate gases such as CO2 and acetylene, and soft polymer networks that serve as recyclable, self-healing, and responsive thermosets, gels and elastomeric materials.

Functional silicone oils and elastomers: new routes lead to new properties

Silicones are mostly utilized for their stability to a range of vigorous environmental conditions, which arises, in part, from the lack of functionality in finished products. The commonly used functional groups in silicones, e.g., SiH, SiCHCH2, are mostly consumed during final product synthesis. Organic functional groups may also be found in silicone products, including organic alcohols, amines, polyethers, etc., that deliver functionality not achieved by traditional organic polymers (e.g., aminosilicones, softening of fabrics; silicone polyethers, superwetting agricultural adjuvants). However, relatively little organic chemistry is practiced in commercial silicones, limiting the types of desirable functionality that can be attained. We report the utilization of a series of simple-to-practice organic reactions that take place efficiently on silicone oils to allow the preparation of a wide variety of functional silicones. The silicone oil starting materials typically act as both solvent and educt to allow many of the newer reactions, such as Click processes, to be used to tune the properties of both silicone oil and elastomer products. The review considers the concept of 'functionality' to include: the reactive groups used to enable synthesis of more complicated structures; and separately, the functional properties of the product silicones. One such property that is considered throughout is degradability at end-of-life, which is related to the sustainability of silicones.

Polyborosiloxanes (PBS): Evolution of Approaches to the Synthesis and the Prospects of Their Application

The mini-review deals with borosiloxanes as a class of organoelement compounds that comprise Si-O-B bonds, including individual compounds and polymeric structures. The borosiloxanes first synthesized in the 1950s using simple methods demonstrated very unusual properties but were hydrolytically unstable. However, in recent times, synthetic methods have changed significantly, which made it possible to synthesize borosiloxanes that are resistant to external factors, including atmospheric moisture. Borosiloxanes became important due to their unique properties. For example, borosiloxane liquids acquire a thixotropic behavior due to donor-acceptor interchain interactions. In addition, borosiloxanes are used to produce flame-retardant ceramics. An analysis of the literature sources shows that no review has yet been completed on the topic of borosiloxanes. Therefore, we decided that even a brief outlook of this area would be useful for researchers in this and related fields. Thus, the review shows the evolution of the synthesis methods and covers the studies on the properties of these unique molecules, the latest achievements in this field, and the prospects for their application.

From passive to emerging smart silicones

Amassing remarkable properties, silicones are practically indispensable in our everyday life. In most classic applications, they play a passive role in that they cover, seal, insulate, lubricate, water-proof, weather-proof etc. However, silicone science and engineering are highly innovative, seeking to develop new compounds and materials that meet market demands. Thus, the unusual properties of silicones, coupled with chemical group functionalization, has allowed silicones to gradually evolve from passive materials to active ones, meeting the concept of “smart materials”, which are able to respond to external stimuli. In such cases, the intrinsic properties of polysiloxanes are augmented by various chemical modifications aiming to attach reactive or functional groups, and/or by engineering through proper cross-linking pattern or loading with suitable fillers (ceramic, magnetic, highly dielectric or electrically conductive materials, biologically active, etc.), to add new capabilities and develop high value materials. The literature and own data reflecting the state-of-the art in the field of smart silicones, such as thermoplasticity, self-healing ability, surface activity, electromechanical activity and magnetostriction, thermo-, photo-, and piezoresponsivity are reviewed.

Weaving Enzymes with Polymeric Shells for Biomedical Applications

Enzyme therapeutics have received increasing attention due to their high biological specificity, outstanding catalytic efficiency, and impressive therapeutic outcomes. Protecting and delivering enzymes into target cells while retaining enzyme catalytic efficiency is a big challenge. Wrapping of enzymes with rational designed polymer shells, rather than trapping them into large nanoparticles such as liposomes, have been widely explored because they can protect the folded state of the enzyme and make post-functionalization easier. In this review, the methods for wrapping up enzymes with protective polymer shells are mainly focused on. It is aimed to provide a toolbox for the rational design of polymeric enzymes by introducing methods for the preparation of polymeric enzymes including physical adsorption and chemical conjugation with specific examples of these conjugates/hybrid applications. Finally, a conclusion is drawn and key points are emphasized.

Luminescent and Robust Perovskite-Silicone Elastomers Prepared by Light Induced Thiol-Ene Reaction

The preparation of a series of luminescent perovskite-silicone elastomer (PSE) composites by embedding inorganic lead halide perovskite nanocrystals (CsPbBr₃ NCs) into networks constructed by trimethylolpropane tris(2-mercaptoacetate) and sulfone-containing silicone copolymers with vinyl side groups (PSMVS) is reported herein. The networks are obtained by an environmentally friendly thiol-ene cross-linking reaction under 30 W household LED light. The conducted analysis shows that the prepared PSEs display strong green fluorescence due to encapsulation of CsPbBr₃ NCs, which constitute a luminescent center in sulfone-containing silicone networks. Using PSMVS as basic polymers instead of commercial polysiloxanes endows PSEs with enhanced mechanical strength and excellent luminescent stability at high temperatures. The PSEs show robust tensile stress and >650% elongation. Additionally, the construction of colorful ultraviolet light-emitting diodes (UV-LEDs) by an in situ cross-linking process is described.

Low-Temperature-Meltable Elastomers Based on Linear Polydimethylsiloxane Chains Alpha, Omega-Terminated with Mesogenic Groups as Physical Crosslinker: A Passive Smart Material with Potential as Viscoelastic Coupling. Part II-Viscoelastic and Rheological Properties

Rheological and viscoelastic properties of physically crosslinked low-temperature elastomers were studied. The supramolecularly assembling copolymers consist of linear polydimethylsiloxane (PDMS) elastic chains terminated on both ends with mesogenic building blocks (LC) of azobenzene type. They are generally and also structurally highly different from the well-studied LC polymer networks or LC elastomers: The LC units make up only a small volume fraction in our materials and act as fairly efficient physical crosslinkers with thermotropic properties. The aggregation (nano-phase separation) of the relatively rare, small and spatially separated terminal LC units generates temperature-switched viscoelasticity in the molten copolymers. Their rheological behavior was found to be controlled by an interplay of nano-phase separation of the LC units (growth and splitting of their aggregates) and of the thermotropic transitions in these aggregates (which change their stiffness). As a consequence, multiple gel points (up to three) are observed in temperature scans of the copolymers. The physical crosslinks also can be reversibly disconnected by large mechanical strain in the 'warm' rubbery state, as well as in melt (thixotropy). The kinetics of crosslink formation was found to be fast if induced by temperature and extremely fast in case of internal self-healing after strain damage. Thixotropic loop tests hence display only very small hysteresis in the LC-melt-state, although the melts show very distinct shear thinning. Our study evaluates structure-property relationships in three homologous systems with elastic PDMS segments of different length (8.6, 16.3 and 64.4 repeat units). The studied copolymers might be of interest as passive smart materials, especially as temperature-controlled elastic/viscoelastic mechanical coupling.

Dynamically tuning transient silicone polymer networks with hydrogen bonding

Supramolecular polymers are composed of non-covalently connected chains and characterized by high chain dynamics. The viscoelastic behavior of supramolecular telechelic sugar-siloxanes - ranging from solids to viscous fluids able to form transient polymer networks - is readily tuned by the fraction of internal HO groups that can intermolecularly form hydrogen bonds.

Low-Temperature Meltable Elastomers Based on Linear Polydimethylsiloxane Chains Alpha, Omega-Terminated with Mesogenic Groups as Physical Crosslinkers: A Passive Smart Material with Potential as Viscoelastic Coupling. Part I: Synthesis and Phase Behavior

Physically crosslinked low-temperature elastomers were prepared based on linear polydimethylsiloxane (PDMS) elastic chains terminated on both ends with mesogenic building blocks (LC) of azobenzene type. They are generally (and also structurally) highly different from the well-studied LC polymer networks (light-sensitive actuators). The LC units also make up only a small volume fraction in our materials and they do not generate elastic energy upon irradiation, but they act as physical crosslinkers with thermotropic properties. Our elastomers lack permanent chemical crosslinks-their structure is fully linear. The aggregation of the relatively rare, small, and spatially separated terminal LC units nevertheless proved to be a considerably strong crosslinking mechanism. The most attractive product displays a rubber plateau extending over 100 °C, melts near 8 °C, and is soluble in organic solvents. The self-assembly (via LC aggregation) of the copolymer molecules leads to a distinctly lamellar structure indicated by X-ray diffraction (XRD). This structure persists also in melt (polarized light microscopy, XRD), where 1-2 thermotropic transitions occur. The interesting effects of the properties of this lamellar structure on viscoelastic and rheological properties in the rubbery and in the melt state are discussed in a follow-up paper ("Part II"). The copolymers might be of interest as passive smart materials, especially as temperature-controlled elastic/viscoelastic mechanical coupling. Our study focuses on the comparison of physical properties and structure-property relationships in three systems with elastic PDMS segments of different length (8.6, 16.3, and 64.4 repeat units).

Organoboron Derivatives of Stereoregular Phenylcyclosilsesquioxanes

This study presents the synthesis of organoboron derivatives of stereoregular 4-, 6-, and 12-unit phenylcyclosilsesquioxanes. All compounds obtained were isolated in good yields (70-80 %) and were fully characterized by ¹ H, ¹³ C, ²⁹ Si, ¹¹ B NMR, IR spectroscopy, HRMS ESI, and elemental microanalysis. The structure of the key modifier, obtained for the first time, 4-(tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl) dimethylvinylsilane, was also confirmed by single-crystal XRD.

Tuning polymer properties of non-covalent crosslinked PDMS by varying supramolecular interaction strength

Linear polydimethylsiloxane (PDMS) is crosslinked by supramolecular grafts to obtain materials with strikingly different mechanical properties by tuning the strength of the non-covalent interactions.

Polymerization of Polar Monomers Mediated by Main-Group Lewis Acid-Base Pairs

The development of new or more sustainable, active, efficient, controlled, and selective polymerization reactions or processes continues to be crucial for the synthesis of important polymers or materials with specific structures or functions. In this context, the newly emerged polymerization technique enabled by main-group Lewis pairs (LPs), termed as Lewis pair polymerization (LPP), exploits the synergy and cooperativity between the Lewis acid (LA) and Lewis base (LB) sites of LPs, which can be employed as frustrated Lewis pairs (FLPs), interacting LPs (ILPs), or classical Lewis adducts (CLAs), to effect cooperative monomer activation as well as chain initiation, propagation, termination, and transfer events. Through balancing the Lewis acidity, Lewis basicity, and steric effects of LPs, LPP has shown several unique advantages or intriguing opportunities compared to other polymerization techniques and demonstrated its broad polar monomer scope, high activity, control or livingness, and complete chemo- or regioselectivity, as well as its unique application in materials chemistry. These advances made in LPP are comprehensively reviewed, with the scope of monomers focusing on heteroatom-containing polar monomers, while the polymerizations mediated by main-group LAs and LBs separately that are most relevant to the LPP are also highlighted or updated. Examples of applying the principles of the LPP and LP chemistry as a new platform for advancing materials chemistry are highlighted, and currently unmet challenges in the field of the LPP, and thus the suggested corresponding future research directions, are also presented.

Polysiloxane/Polystyrene Thermo-Responsive and Self-Healing Polymer Network via Lewis Acid-Lewis Base Pair Formation

The use of thermo-reversible Lewis Pair (LP) interactions in the formation of transient polymer networks is still greatly underexplored. In this work, we describe the synthesis and characterization of polydimethylsiloxane/polystyrene (PDMS/PS) blends that form dynamic Lewis acid-Lewis base adducts resulting in reversible crosslinks. Linear PS containing 10 mol % of di-2-thienylboryl pendant groups randomly distributed was obtained in a two-step one-pot functionalization reaction from silyl-functionalized PS, while ditelechelic PDMS with pyridyl groups at the chain-termini was directly obtained via thiol-ene “click” chemistry from commercially available vinyl-terminated PDMS. The resulting soft gels, formed after mixing solutions containing the PDMS and PS polymers, behave at room temperature as elastomeric solid-like materials with very high viscosity (47,300 Pa·s). We applied rheological measurements to study the thermal and time dependence of the viscoelastic moduli, and also assessed the reprocessability and self-healing behavior of the dry gel.

A readily self-healing and recyclable silicone elastomer via boron–nitrogen noncovalent crosslinking

A self-healing silicone elastomer was synthesized via a one-pot and noncatalytic aza-Michael reaction because boron–nitrogen coordination bonds form reversible crosslinking points.

Surface immobilized azomethine for multiple component exchange

Diazonium chemistry concomitant with in situ electrochemical reduction was used to graft an aryl aldehyde to indium-tin oxide (ITO) coated glass substrates. This served as an anchor for preparing electroactive azomethines that were covalently bonded to the transparent electrode. The immobilized azomethines could undergo multiple step-wise component exchanges with different arylamines. The write-erase-write sequences were electrochemically confirmed. The azomethines could also be reversibly hydrolyzed. This was exploited for multiple azomethine-hydrolysis cycles resulting in discrete electroactive immobilized azomethines. The erase-rewrite sequences were also electrochemically confirmed.

Recyclable Polydimethylsiloxane Network Crosslinked by Dynamic Transesterification Reaction

This article reports preparation of a crosslinked polydimethylsiloxane (PDMS) network via dynamic transesterification reaction between PDMS-diglycidyl ether and pripol 1017 with Zn(OAc)2 as the catalyst. The thermal dynamic nature of the network was investigated by the creep-recovery and stress-relaxation tests. The synthesized PDMS elastomer showed excellent solvent resistance even under high temperature, and could be reprocessed by hot pressing at 180 °C with the mechanical properties maintained after 10 cycles. Application of the PDMS elastomer in constructing micro-patterned stamps repeatedly has been demonstrated. The high plastic temperature and good solvent resistance distinguish the research from other reported thermoplastic PDMS elastomers and broaden the practical application areas.

Spread and set silicone–boronic acid elastomers

Silicone boronates efficiently spread on water and then form resilient elastomers as shown by the colored water-on-silicone-on-water films that form.

Sweet supramolecular elastomers from α,ω-(β-cyclodextrin terminated) PDMS

CDs linked to PDMS vaturally phase separate and hydrogen bond to generate supramolecular elastomers.

Surface Behavior of Boronic Acid-Terminated Silicones

Silicone polymers, with their high flexibility, lie in a monolayer at the air-water interface as they are compressed until a critical pressure is reached, at which point multilayers are formed. Surface pressure measurements demonstrate that, in contrast, silicones that are end-modified with polar groups take up lower surface areas under compression because the polar groups submerge into the water phase. Boronic acids have the ability to undergo coordination with Lewis bases. As part of a program to examine the surface properties of boronic acids, we have prepared boronic acid-modified silicones (SiBAs) and examined them at the air-water interface to better understand if they behave like other end-functional silicones. Monolayers of silicones, aminopropylsilicones, and SiBAs were characterized at the air-water interface as a function of end functionalization and silicone chain length. Brewster angle and atomic force microscopies confirm domain formation and similar film morphologies for both functionalized and non-functionalized silicone chains. There is a critical surface pressure (10 mN m(-1)) independent of chain length that corresponds to a first-order phase transition. Below this transition, the film appears to be a homogeneous monolayer, whose thickness is independent of the chain length. Ellipsometry at the air-water interface indicates that the boronic acid functionality leads to a significant increase of film thickness at low molecular areas that is not seen for non-functionalized silicone chains. What differentiates the boronic acids from simple silicones or other end-functionalized silicones, in particular, is the larger area occupied by the headgroup when under compression compared to other or non-end-functionalized silicones, which suggests an in-plane rather than submerged orientation that may be driven by boronic acid self-complexation.