1
|
Malhotra M, Kaur B, Soni V, Patial S, Sharma K, Kumar R, Singh P, Thakur S, Pham PV, Ahamad T, Le QV, Nguyen VH, Raizada P. Fe-based MOFs as promising adsorbents and photocatalysts for re-use water contained arsenic: Strategies and challenges. CHEMOSPHERE 2024; 357:141786. [PMID: 38537716 DOI: 10.1016/j.chemosphere.2024.141786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/28/2023] [Revised: 03/03/2024] [Accepted: 03/22/2024] [Indexed: 04/29/2024]
Abstract
Arsenic (As) contaminated water, especially groundwater reservoirs, is a major issue worldwide owing to its hazardous consequences on human health and the global environment issues. Also, irrigating agricultural fields with As-contaminated water not only produces an accumulation of As in the soil but also compromises food safety due to As entering into agricultural products. Hence, there is an urgent need to develop an efficient method for As removal in water. Fe-based MOFs have attained special attention due to their low toxicity, high water stability, better physical and chemical properties, and high abundance of iron. The arsenic species removal by Fe-MOF follows the adsorption and oxidation mechanism where As (III) converts into As (V). Moreover, the adsorption mechanism is facilitated by electrostatic interactions, H-bonding, acid-base interaction, hydrophobic interactions, van der Waals forces, π-π stacking interactions, and coordinative bindings responsible for Fe-O-As bond generation. This review thoroughly recapitulates and analyses recent advancements in the facile synthesis and potential application of Fe-based MOF adsorbents for the elimination of As ions. The most commonly employed hydro/solvothermal, ultrasonic, microwave-assisted, mechanochemical, and electrochemical synthesis for Fe-MOF has been discussed along with their adsorptive and oxidative mechanisms involved in arsenic removal. The effects of factors like pH and coexisting ions have also been discussed. Lastly, the article also proposed the prospects for developing the application of Fe-based MOF in treating As-contaminated water.
Collapse
Affiliation(s)
- Monika Malhotra
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Balvinder Kaur
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Vatika Soni
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Shilpa Patial
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Kusum Sharma
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Rohit Kumar
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Pardeep Singh
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India
| | - Sourbh Thakur
- Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Silesian University of Technology, B. Krzywoustego 4, 44-100, Gliwice, Poland
| | - Phuong V Pham
- Department of Physics, National Sun Yat-Sen University, Kaohsiung 80424, Taiwan
| | - Tansir Ahamad
- Department of Chemistry, College of Science, King Saud University, Saudi Arabia
| | - Quyet Van Le
- Department of Materials Science and Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Van-Huy Nguyen
- Centre for Herbal Pharmacology and Environmental Sustainability, Chettinad Hospital and Research Institute, Chettinad Academy of Research and Education, Kelambakkam-603103, Tamil Nadu, India.
| | - Pankaj Raizada
- School of Advanced Chemical Sciences, Faculty of Basic Sciences, Shoolini University, Solan, HP 173229, India.
| |
Collapse
|
2
|
Gu B, Zhang H, Ye M, Zhou T, Yi J, Hu Q. Adsorption Behavior of Organoarsenicals over MnFe 2O 4-Graphene Hybrid Nanocomposite: The Role of Organoarsenic Chemical Structures. MATERIALS (BASEL, SWITZERLAND) 2023; 16:7636. [PMID: 38138778 PMCID: PMC10744441 DOI: 10.3390/ma16247636] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Revised: 12/09/2023] [Accepted: 12/12/2023] [Indexed: 12/24/2023]
Abstract
As a kind of emerging contaminant, organoarsenic compounds have drawn wide concern because of their considerable solubilities in water, and the highly toxic inorganic arsenic species formed during their biotic and abiotic degradation in the natural environment. Thus, the effective removal and studying of the adsorption mechanism of organoarsenic compounds are of significant urgency. In this work, MnFe2O4 and MnFe2O4/graphene were prepared through a facile solvothermal method. From the results of the Transmission Electron Microscope (TEM) characterization, it can be found that MnFe2O4 nanoparticles were uniformly distributed on the surface of the graphene. And the specific surface area of the MnFe2O4/graphene was about 146.39 m2 g-1, much higher than that of the MnFe2O4 (86.15 m2 g-1). The interactions between organoarsenic compounds and adsorbents were conducted to study their adsorption behavior and mechanism. The maximum adsorption capacities of MnFe2O4/graphene towards p-arsanilic acid (p-ASA) and roxarsone (ROX) were calculated to be 22.75 and 30.59 mg g-1. Additionally, the ionic strength, negative ions, and humus were introduced to investigate the adsorption performance of organoarsenic compounds. Electrostatic adsorption and surface complexation are the primary adsorption mechanisms on account of X-ray photoelectron spectroscopy (XPS) and the Fourier-transform infrared spectroscopy (FT-IR) analysis. This research extends the knowledge into studying the interaction between organoarsenic species and hybrid nanomaterials in the natural environment.
Collapse
Affiliation(s)
- Binxian Gu
- College of Environmental Science and Engineering, Yangzhou University, 196 West Huayang Road, Yangzhou 225127, China; (B.G.); (H.Z.); (M.Y.); (T.Z.); (J.Y.)
- Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing 210095, China
| | - Haijie Zhang
- College of Environmental Science and Engineering, Yangzhou University, 196 West Huayang Road, Yangzhou 225127, China; (B.G.); (H.Z.); (M.Y.); (T.Z.); (J.Y.)
| | - Meng Ye
- College of Environmental Science and Engineering, Yangzhou University, 196 West Huayang Road, Yangzhou 225127, China; (B.G.); (H.Z.); (M.Y.); (T.Z.); (J.Y.)
| | - Ting Zhou
- College of Environmental Science and Engineering, Yangzhou University, 196 West Huayang Road, Yangzhou 225127, China; (B.G.); (H.Z.); (M.Y.); (T.Z.); (J.Y.)
| | - Jianjian Yi
- College of Environmental Science and Engineering, Yangzhou University, 196 West Huayang Road, Yangzhou 225127, China; (B.G.); (H.Z.); (M.Y.); (T.Z.); (J.Y.)
| | - Qingsong Hu
- College of Environmental Science and Engineering, Yangzhou University, 196 West Huayang Road, Yangzhou 225127, China; (B.G.); (H.Z.); (M.Y.); (T.Z.); (J.Y.)
| |
Collapse
|
3
|
Meng F, Wang Y, Lv X, Feng F, Yang G. Electrochemiluminescent bioassay based on Ru@Zr-BTC-MOFs nanoparticles for determination of let-7a miRNA using the hybridization chain reaction. Mikrochim Acta 2023; 191:23. [PMID: 38091146 DOI: 10.1007/s00604-023-06107-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2023] [Accepted: 11/19/2023] [Indexed: 12/18/2023]
Abstract
Carboxyl-rich tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) ([Ru(dcbpy)3]2+) and 1,3,5-phenyl tricarboxylic acid (H3BTC) were used as the organic ligand to synthesize the metal-organic frameworks by a simple one-pot hydrothermal method with ZrCl4 as metal ion source. Subsequently, the excellent electrochemiluminescence (ECL) luminophore (denoted as Ru@Zr-BTC-MOFs) was obtained. The Ru@Zr-BTC-MOFs displayed outstanding ECL properties, and a sensitive ECL bioassay based on Ru@Zr-BTC-MOFs was designed for the detection of let-7a microRNA (miRNA) using hybrid chain reaction (HCR). Under the optimal experimental conditions, the proposed bioassay exhibited a good linear relationship in the range from 50.0 fM to 5.00 × 102 pM with a detection limit of 3.71 fM. Besides, the proposed sensor exhibited satisfactory performance in real samples. The recovery was 91 ~ 108%, and the relative standard deviation was less than 5.6%. It might have potential clinical applications for detecting miRNA in biomedical research and clinical diagnosis. The schematic diagram of the preparation of Ru@Zr-BTC-MOFs (a) and ECL sensor for detecting let -7a (b).
Collapse
Affiliation(s)
- Fei Meng
- Key Laboratory of Drug Quality Control and Pharmacovigilance (China Pharmaceutical University), Ministry of Education, School of Pharmacy, China Pharmaceutical University, Nanjing, 211198, People's Republic of China
| | - Yisi Wang
- Key Laboratory of Drug Quality Control and Pharmacovigilance (China Pharmaceutical University), Ministry of Education, School of Pharmacy, China Pharmaceutical University, Nanjing, 211198, People's Republic of China
| | - Xinxin Lv
- Key Laboratory of Drug Quality Control and Pharmacovigilance (China Pharmaceutical University), Ministry of Education, School of Pharmacy, China Pharmaceutical University, Nanjing, 211198, People's Republic of China
| | - Fang Feng
- Key Laboratory of Drug Quality Control and Pharmacovigilance (China Pharmaceutical University), Ministry of Education, School of Pharmacy, China Pharmaceutical University, Nanjing, 211198, People's Republic of China.
| | - Gongjun Yang
- Key Laboratory of Drug Quality Control and Pharmacovigilance (China Pharmaceutical University), Ministry of Education, School of Pharmacy, China Pharmaceutical University, Nanjing, 211198, People's Republic of China.
| |
Collapse
|
4
|
Xiong T, Cui J, Hou Z, Yuan X, Wang H, Chen J, Yang Y, Huang Y, Xu X, Su C, Leng L. Prediction of arsenic adsorption onto metal organic frameworks and adsorption mechanisms interpretation by machine learning. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 347:119065. [PMID: 37801942 DOI: 10.1016/j.jenvman.2023.119065] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/14/2023] [Revised: 06/18/2023] [Accepted: 08/30/2023] [Indexed: 10/08/2023]
Abstract
Metal-organic frameworks (MOFs) are promising adsorbents for the removal of arsenic (As) from wastewater. The As removal efficiency is influenced by several factors, such as the textural properties of MOFs, adsorption conditions, and As species. Examining all of the relevant factors through traditional experiments is challenging. To predict the As adsorption capacities of MOFs toward organic, inorganic, and total As and reveal the adsorption mechanisms, four machine learning-based models were developed, with the adsorption conditions, MOF properties, and characteristics of different As species as inputs. The results demonstrated that the extreme gradient boosting (XGBoost) model exhibited the best predictive performance (test R2 = 0.93-0.96). The validation experiments demonstrated the high accuracy of the inorganic As-based XGBoost model. The feature importance analysis showed that the concentration of As, the surface area of MOFs, and the pH of the solution were the three key factors governing inorganic-As adsorption, while those governing organic-As adsorption were the concentration of As, the pHpzc value of MOFs, and the oxidation state of the metal clusters. The formation of coordination complexes between As and MOFs is possibly the major adsorption mechanism for both inorganic and organic As. However, electrostatic interaction may have a greater effect on organic-As adsorption than on inorganic-As adsorption. Overall, this study provides a new strategy for evaluating As adsorption on MOFs and discovering the underlying decisive factors and adsorption mechanisms, thereby facilitating the investigation of As wastewater treatment.
Collapse
Affiliation(s)
- Ting Xiong
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China; Changsha Social Laboratory of Artificial Intelligence, Changsha, 410205, China
| | - Jiawen Cui
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China
| | - Zemin Hou
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China
| | - Xingzhong Yuan
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, China
| | - Hou Wang
- College of Environmental Science and Engineering, Hunan University, Changsha, 410082, China
| | - Jie Chen
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China
| | - Yi Yang
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China
| | - Yishi Huang
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China
| | - Xintao Xu
- School of Advanced Interdisciplinary Studies, Hunan University of Technology and Business, Changsha, 410205, China
| | - Changqing Su
- Changsha Social Laboratory of Artificial Intelligence, Changsha, 410205, China; School of Resources and Environment, Hunan University of Technology and Business, Changsha, 410205, China
| | - Lijian Leng
- School of Energy Science and Engineering, Central South University, Changsha, 410083, China.
| |
Collapse
|
5
|
Traoré B, Diallo W, Sidibé M, Diop L, Plasseraud L, Cattey H. Crystal structure of di-benzyl-ammonium hydrogen (4-amino-phen-yl)arsonate monohydrate. Acta Crystallogr E Crystallogr Commun 2023; 79:1003-1007. [PMID: 37936848 PMCID: PMC10626960 DOI: 10.1107/s205698902300837x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2023] [Accepted: 09/22/2023] [Indexed: 11/09/2023]
Abstract
The title salt, C14H16N+·C6H7AsNO3 -·H2O or [(C6H5CH2)2NH2][H2NC6H4As(OH)O2]·H2O, (I), was synthesized by mixing an aqueous solution of (4-amino-phenyl)-arsonic acid with an ethano-lic solution of di-benzyl-amine at room temperature. Compound I crystallizes in the monoclinic P21/c space group. The three components forming I are linked via N-H⋯O and O-H⋯O inter-molecular hydrogen bonds, resulting in the propagation of an infinite zigzag chain. Additional weak inter-actions between neighbouring chains, such as π-π and N-H⋯O contacts, involving phenyl rings, -NH2 and -As(OH)O3 functions, and H2O, respectively, lead to a three-dimensional network.
Collapse
Affiliation(s)
- Bocar Traoré
- Laboratoire de Chimie Minérale et Analytique (LACHIMIA), Département de Chimie, Faculté des Sciences et Techniques, Université Cheikh Anta Diop, Dakar, Senegal
| | - Waly Diallo
- Laboratoire de Chimie Minérale et Analytique (LACHIMIA), Département de Chimie, Faculté des Sciences et Techniques, Université Cheikh Anta Diop, Dakar, Senegal
| | - Mamadou Sidibé
- Laboratoire de Chimie Minérale et Analytique (LACHIMIA), Département de Chimie, Faculté des Sciences et Techniques, Université Cheikh Anta Diop, Dakar, Senegal
| | - Libasse Diop
- Laboratoire de Chimie Minérale et Analytique (LACHIMIA), Département de Chimie, Faculté des Sciences et Techniques, Université Cheikh Anta Diop, Dakar, Senegal
| | - Laurent Plasseraud
- ICMUB UMR 6302, Université de Bourgogne (UB), Faculté des Sciences, 9 avenue Alain Savary, 21000 DIJON, France
| | - Hélène Cattey
- ICMUB UMR 6302, Université de Bourgogne (UB), Faculté des Sciences, 9 avenue Alain Savary, 21000 DIJON, France
| |
Collapse
|
6
|
Ding WQ, Xu L, Li XY, Fu ML, Yuan B. 3D-Printed MOFs/Polymer Composite as a Separatable Adsorbent for the Removal of Phenylarsenic Acid in the Aqueous Solution. ACS APPLIED MATERIALS & INTERFACES 2023; 15:49181-49194. [PMID: 37816194 DOI: 10.1021/acsami.3c10766] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/12/2023]
Abstract
Metal-organic frameworks (MOFs) are emerging as advanced nanoporous materials to remove phenylarsenic acid, p-arsanilic acid (p-ASA), and roxarsone (ROX) in the aqueous solution, while MOFs are often present as powder state and encounter difficulties in recovery after adsorption, which greatly limit their practical application in the aqueous environments. Herein, MIL-101 (Fe), a typical MOF, was mixed with sodium alginate and gelatin to prepare MIL-101@CAGE by three-dimensional (3D) printing technology, which was then used as a separatable adsorbent to remove phenylarsenic acid in the aqueous solution. The structure of 3D-printed MIL-101@CAGE was first characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetry and differential thermogravimetry (TG-DTG). The octahedral morphology of MIL-101 (Fe) was found unchanged during the 3D printing process. Then, the adsorption process of MIL-101@CAGE on phenylarsenic acids was systematically investigated by adsorption kinetics, adsorption isotherms, adsorption thermodynamics, condition experiments, and cyclic regeneration experiments. Finally, the adsorption mechanism between MIL-101@CAGE and phenylarsenic acid was further investigated. The results showed that the Langmuir, Freundlich, and Temkin isotherms were well fit, and according to the Langmuir fitting results, the maximum adsorption amounts of MIL-101@CAGE on p-ASA and ROX at 25 °C were 106.98 and 120.28 mg/g, respectively. The removal of p-ASA and ROX by MIL-101@CAGE remained stable over a wide pH range and in the presence of various coexisting ions. The regeneration experiments showed that the 3D-printed MIL-101@CAGE could still maintain a more than 90% removal rate after five cycles. The adsorption mechanism of this system might include π-π stacking interactions between the benzene ring on the phenylarsenic acids and the organic ligands in MIL-101@CAGE, hydrogen-bonding, and ligand-bonding interactions (Fe-O-As). This study provides a new idea for the scale preparation of a separatable and recyclable adsorbent based on MOF material for the efficient removal of phenylarsenic acid in the aqueous solution.
Collapse
Affiliation(s)
- Wen-Qing Ding
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian 361021, P. R. China
| | - Lei Xu
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian 361021, P. R. China
| | - Xiao-Ying Li
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian 361021, P. R. China
| | - Ming-Lai Fu
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian 361021, P. R. China
| | - Baoling Yuan
- Key Laboratory of Songliao Aquatic Environment, Ministry of Education, Jilin Jianzhu University, Changchun 130118, P. R. China
| |
Collapse
|
7
|
Ding WQ, Labiadh L, Xu L, Li XY, Chen C, Fu ML, Yuan B. Current advances in the detection and removal of organic arsenic by metal-organic frameworks. CHEMOSPHERE 2023; 339:139687. [PMID: 37541439 DOI: 10.1016/j.chemosphere.2023.139687] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2023] [Revised: 07/23/2023] [Accepted: 07/29/2023] [Indexed: 08/06/2023]
Abstract
Arsenic (As) is a highly toxic heavy metal and has been widely concerned for its hazardous environmental impact. Aromatic organic arsenic (AOCs) has been frequently used as an animal supplement to enhance feed utilization and prevent dysentery. The majority of organic arsenic could be discharged from the body and evolve as highly toxic inorganic arsenic that is hazardous to the environment and human health via biological conversion, photodegradation, and photo-oxidation. Current environmental issues necessitate the development and application of multifunctional porous materials in environmental remediation. Compared to the conventional adsorbent, such as activated carbon and zeolite, metal-organic frameworks (MOFs) exhibit a number of advantages, including simple synthesis, wide variety, simple modulation of pore size, large specific surface area, excellent chemical stability, and easy modification. In recent years, numerous scientists have investigated MOFs related materials involved with organic arsenic. These studies can be divided into three categories: detection of organic arsenic by MOFs, adsorption to remove organic arsenic by MOFs, and catalytic removal of organic arsenic by MOFs. Here, we conduct a critical analysis of current research findings and knowledge pertaining to the structural characteristics, application methods, removal properties, interaction mechanisms, and spectral analysis of MOFs. We summarized the application of MOFs in organic arsenic detection, adsorption, and catalytic degradation. Other arsenic removal technologies and conventional substances are also being investigated. This review will provide relevant scientific researchers with references.
Collapse
Affiliation(s)
- Wen-Qing Ding
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China
| | - Lazhar Labiadh
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China
| | - Lei Xu
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China
| | - Xiao-Ying Li
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China
| | - Chen Chen
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China
| | - Ming-Lai Fu
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China.
| | - Baoling Yuan
- Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian, 361021, PR China; Key Laboratory of Songliao Aquatic Environment, Ministry of Education, Jilin Jianzhu University, Changchun, 130118, PR China.
| |
Collapse
|
8
|
Li XY, Ding WQ, Liu P, Xu L, Fu ML, Yuan B. Magnetic Fe3O4/MIL-101 composite as a robust adsorbent for removal of p-arsanilic acid and roxarsenic in the aqueous solution. Colloids Surf A Physicochem Eng Asp 2023. [DOI: 10.1016/j.colsurfa.2023.131014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
9
|
Hashemi L, Masoomi MY, Garcia H. Regeneration and reconstruction of metal-organic frameworks: Opportunities for industrial usage. Coord Chem Rev 2022. [DOI: 10.1016/j.ccr.2022.214776] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
10
|
Ijaz I, Bukhari A, Gilani E, Nazir A, Zain H. Compositing of MOFs with ceramic and nanoparticles for efficient and rapid adsorptive desalination of artificial seawater or NaCl solution. RSC Adv 2022; 12:29793-29804. [PMID: 36329944 PMCID: PMC9585531 DOI: 10.1039/d2ra04182k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2022] [Accepted: 10/11/2022] [Indexed: 11/13/2022] Open
Abstract
Poor water availability with the fast-growing population creates crucial issues for universal water security, and efficient approaches ought to be accomplished to balance the demand and supply. One of the most energy- and cost-effective methods for removing NaCl is adsorption desalination. Metal-organic frameworks with ceramic and nanoparticles are a comparatively new research route that increases the desalination capacity. The synthesized composites were examined for efficient and rapid removal of NaCl from NaCl solution or artificial seawater. The adsorption desalination properties were analyzed based on adsorption isotherm, adsorption kinetics, contact time, NaCl, and adsorbent dosage. The adsorptive desalination rate of ZnO@MIL88A(Fe)@α-cordierite composite was only decreased by 4% as the maximum loss after 5 consecutive cycles.
Collapse
Affiliation(s)
- Irfan Ijaz
- School of Chemistry, Faculty of Basic Sciences and Mathematics, Minhaj University LahoreLahore 54700Pakistan
| | - Aysha Bukhari
- School of Chemistry, Faculty of Basic Sciences and Mathematics, Minhaj University LahoreLahore 54700Pakistan
| | - Ezaz Gilani
- School of Chemistry, Faculty of Basic Sciences and Mathematics, Minhaj University LahoreLahore 54700Pakistan
| | - Ammara Nazir
- School of Chemistry, Faculty of Basic Sciences and Mathematics, Minhaj University LahoreLahore 54700Pakistan
| | - Hina Zain
- Department of Allied Health Sciences, Superior University LahoreLahore 54700Pakistan
| |
Collapse
|
11
|
Darabdhara J, Ahmaruzzaman M. Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants. CHEMOSPHERE 2022; 304:135261. [PMID: 35697109 DOI: 10.1016/j.chemosphere.2022.135261] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/27/2022] [Revised: 05/25/2022] [Accepted: 06/04/2022] [Indexed: 06/15/2023]
Abstract
With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.
Collapse
Affiliation(s)
- Jnyanashree Darabdhara
- Department of Chemistry, National Institute of Technology, Silchar, 788010, Assam, India
| | - Md Ahmaruzzaman
- Department of Chemistry, National Institute of Technology, Silchar, 788010, Assam, India.
| |
Collapse
|
12
|
Zheng M, Xu L, Chen C, Labiadh L, Yuan B, Fu ML. MOFs and GO-based composites as deliberated materials for the adsorption of various water contaminants. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121187] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
13
|
Wang C, Jiang A, Liu X, Yuen Koh K, Yang Y, Chen JP, Li K. Amorphous metal-organic framework UiO-66-NO2 for removal of oxyanion pollutants: Towards improved performance and effective reusability. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.121014] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
14
|
Environmental Behavior and Remediation Methods of Roxarsone. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12157591] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Roxarsone (ROX) is used extensively in the broiler chicken industry, and most is excreted in poultry litter. ROX degradation produces inorganic arsenic, which causes arsenic contamination of soil and aquatic environment. Furthermore, elevated arsenic concentrations are found in livers of chickens fed ROX. Microorganisms, light, and ions are the main factors that promote ROX degradation in the environment. The adsorption of ROX on different substances and its influencing factors have also been studied extensively. Additionally, the remediation method, combining adsorption and degradation, can effectively restore ROX contamination. Based on this, the review reports the ecological hazards, discussed the transformation and adsorption of ROX in environmental systems, documents the biological response to ROX, and summarizes the remediation methods of ROX contamination. Most previous studies of ROX have been focused on identifying the mechanisms involved under theoretical conditions, but more attention should be paid to the behavior of ROX under real environmental conditions, including the fate and transport of ROX in the real environment. ROX remediation methods at real contaminated sites should also be assessed and verified. The summary of previous studies on the environmental behavior and remediation methods of ROX is helpful for further research in the future.
Collapse
|
15
|
Xie X, Li J, Luo L, Liao W, Luo S. Phenylarsonics in concentrated animal feeding operations: Fate, associated risk, and treatment approaches. JOURNAL OF HAZARDOUS MATERIALS 2022; 430:128394. [PMID: 35158239 DOI: 10.1016/j.jhazmat.2022.128394] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/25/2021] [Revised: 01/27/2022] [Accepted: 01/28/2022] [Indexed: 06/14/2023]
Abstract
Phenylarsonics are present as additives in animal feed in some countries. As only a small fraction of these additives is metabolized in animals, they mostly end up in the environment. A comprehensive investigation of the fate of these additives is crucial for evaluating their risks. This review aims to provide a clear understanding of the transformation mechanism of phenylarsonics in vivo and in vitro and to evaluate their fate and associated risks. Degradation of phenylarsonics releases toxic As species (mainly as inorganic arsenic (iAs)). Trivalent phenylarsonics are the metabolites or biotic degradation intermediates of phenylarsonics. The cleavage of As groups from trivalent phenylarsonics catalyzed by C-As lyase or other unknown pathways generates arsenite (As(III)). As(III) can be further oxidized to arsenate (As(V)) and methylated to methyl-arsenic species. The half-lives associated with abiotic degradation of phenylarsonics ranged from a few minutes to tens of hours, while those associated with biotic degradation ranged from several days to hundreds of days. Abiotic degradation resulted in a higher yield of iAs than biotic degradation. The use of phenylarsonics led to elevated total As and iAs levels in animal products and environmental matrices, resulting in As exposure risk to humans. The oxidation of phenylarsonics to As(V) facilitated the sorptive removal of As, which provides a general approach for treating these compounds. This review provides solid evidence that the use of phenylarsonics has adverse effects on both human health and environmental safety, and therefore, supports their withdrawal from the global market.
Collapse
Affiliation(s)
- Xiande Xie
- College of Resources and Environment, Hunan Agricultural University, Changsha 410128, China
| | - Jingxia Li
- College of Resources and Environment, Hunan Agricultural University, Changsha 410128, China
| | - Lin Luo
- College of Resources and Environment, Hunan Agricultural University, Changsha 410128, China
| | - Wenjuan Liao
- College of Resources and Environment, Hunan Agricultural University, Changsha 410128, China.
| | - Shuang Luo
- College of Resources and Environment, Hunan Agricultural University, Changsha 410128, China.
| |
Collapse
|
16
|
Zhang H, Hu X, Li T, Zhang Y, Xu H, Sun Y, Gu X, Gu C, Luo J, Gao B. MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review. JOURNAL OF HAZARDOUS MATERIALS 2022; 429:128271. [PMID: 35093745 DOI: 10.1016/j.jhazmat.2022.128271] [Citation(s) in RCA: 48] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/27/2021] [Revised: 01/02/2022] [Accepted: 01/11/2022] [Indexed: 06/14/2023]
Abstract
With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.
Collapse
Affiliation(s)
- Hanshuo Zhang
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China
| | - Xin Hu
- State Key Laboratory of Analytical Chemistry for Life Science, Centre of Materials Analysis and School of Chemistry & Chemical Engineering, Nanjing University, 22 Hankou Road, Nanjing 210023, PR China.
| | - Tianxiao Li
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China
| | - Yuxuan Zhang
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China
| | - Hongxia Xu
- Key Laboratory of Surficial Geochemistry of Ministry of Education, School of Earth Sciences and Engineering, Hydrosciences Department, Nanjing University, Nanjing 210023, PR China.
| | - Yuanyuan Sun
- Key Laboratory of Surficial Geochemistry of Ministry of Education, School of Earth Sciences and Engineering, Hydrosciences Department, Nanjing University, Nanjing 210023, PR China
| | - Xueyuan Gu
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China
| | - Cheng Gu
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China
| | - Jun Luo
- State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, PR China.
| | - Bin Gao
- Department of Agricultural and Biological Engineering, University of Florida, Gainesville, FL, 32611, USA
| |
Collapse
|
17
|
Al’Abri AM, Sharhan O, Halim SNA, Bakar NKA, Sherino B, Kamboh MA, Nodeh HR, Mohamad S. Effect of framework metal ions of analogous magnetic porous coordination polymers on adsorption of cationic and anionic dyes from aqueous solution. CHEMICAL PAPERS 2022. [DOI: 10.1007/s11696-022-02100-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
18
|
Yang Z, Zhu T, Xiong M, Sun A, Xu Y, Wu Y, Shu W, Xu Z. Tuning adsorption capacity of metal–organic frameworks with Al3+ for phosphorus removal: Kinetics, isotherm and regeneration. INORG CHEM COMMUN 2021. [DOI: 10.1016/j.inoche.2021.108804] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
19
|
|
20
|
Ali N, Bilal M, Khan A, Ali F, Yang Y, Malik S, Din SU, Iqbal HMN. Deployment of metal-organic frameworks as robust materials for sustainable catalysis and remediation of pollutants in environmental settings. CHEMOSPHERE 2021; 272:129605. [PMID: 33482513 DOI: 10.1016/j.chemosphere.2021.129605] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/01/2020] [Revised: 01/05/2021] [Accepted: 01/08/2021] [Indexed: 02/05/2023]
Abstract
From metal-organic chemistry, metal-organic frameworks (MOFs) are of supreme interest for catalysis and environmental settings. Owing to anthropogenic sources and booming industrial practices, the most challenging issue is increased water pollution and environmental insecurity. For instance, several types of synthetic dyes are toxic up to a certain extent, as emerging organic contaminants (EOCs) pose adverse environmental and potential health consequences. A gradual increase in the contamination sources and unpredictable environmental changes in terms of anthropogenic pollution severely affect both water availability and distribution. Therefore, the treatment of dyes containing wastewater matrices for water resource generation is one of the most important tasks, which must be addressed effectively. With structural tunability, MOFs have been appearing as a robust tool for remediating toxic pollutants from wastewater matrices. Moreover, the promising functionality, structural tunability, robust catalytic attributes, compatibility, large surface area, stability in water, and ease in surface functionalization make MOFs one of the considerable materials of interest. This review work spotlights the present-day progress related to MOFs and their catalytic and adsorptive chemistry for a sustainable environment. Following a brief introduction, the characteristic rendering MOFs, as adsorbents, are given with prominent examples. Next, several synthesis routes as a roadmap to engineer MOFs are discussed. From the applied perspective, the adsorptive and catalytic potentialities of MOFs as given by addressing sustainable mitigation of toxic dyes. The last section of the work illustrates key challenging issues and future directions by considering the suiting importance of MOFs.
Collapse
Affiliation(s)
- Nisar Ali
- Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, National & Local Joint Engineering Research Centre for Deep Utilization Technology of Rock-salt Resource, Faculty of Chemical Engineering, Huaiyin Institute of Technology, Huaian, 223003, China.
| | - Muhammad Bilal
- School of Life Science and Food Engineering, Huaiyin Institute of Technology, Huaian, 223003, China.
| | - Adnan Khan
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, 25120, Pakistan
| | - Farman Ali
- Department of Chemistry, Hazara University, KPK, Mansehra, 21300, Pakistan
| | - Yong Yang
- Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, National & Local Joint Engineering Research Centre for Deep Utilization Technology of Rock-salt Resource, Faculty of Chemical Engineering, Huaiyin Institute of Technology, Huaian, 223003, China
| | - Sumeet Malik
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, 25120, Pakistan
| | - Salah Ud Din
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, 25120, Pakistan
| | - Hafiz M N Iqbal
- Tecnologico de Monterrey, School of Engineering and Sciences, Monterrey, 64849, Mexico.
| |
Collapse
|
21
|
Nanocomposites of Fe2O3@rGO for adsorptive removal of arsanilic acid from aqueous solution. KOREAN J CHEM ENG 2021. [DOI: 10.1007/s11814-020-0722-z] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
22
|
Bagheri AR, Aramesh N, Bilal M. New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides. ENVIRONMENTAL RESEARCH 2021; 194:110654. [PMID: 33359702 DOI: 10.1016/j.envres.2020.110654] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2020] [Revised: 12/16/2020] [Accepted: 12/18/2020] [Indexed: 06/12/2023]
Abstract
Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.
Collapse
Affiliation(s)
| | - Nahal Aramesh
- Chemistry Department, Yasouj University, Yasouj, 75918-74831, Iran
| | - Muhammad Bilal
- School of Life Science and Food Engineering, Huaiyin Institute of Technology, Huaian, 223003, China.
| |
Collapse
|
23
|
Xie X, Cheng H. Adsorption and desorption of phenylarsonic acid compounds on metal oxide and hydroxide, and clay minerals. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 757:143765. [PMID: 33229094 DOI: 10.1016/j.scitotenv.2020.143765] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/12/2020] [Revised: 11/01/2020] [Accepted: 11/02/2020] [Indexed: 06/11/2023]
Abstract
Adsorption and desorption of p-arsanilic acid (p-ASA) and roxarsone (ROX) on six soil minerals, including hematite (α-Fe2O3), goethite (α-FeOOH), ferrihydrite (Fe(OH)3), aluminum oxide (α-Al2O3), manganese oxide (γ-MnO2), and kaolinite, were studied, and the impact of solution matrices on their adsorption was systematically evaluated. Adsorption of p-ASA/ROX on the metal (hydro)oxide and clay minerals occurred quickly (mostly within 2 h), and could be well described by the pseudo second-order kinetic model. The apparent maximum adsorption capacities of α-Fe2O3, α-FeOOH, Fe(OH)3, α-Al2O3, γ-MnO2, and kaolinite (at an initial pH of 7.0) for p-ASA were 1.7, 0.9, 2.5, 0.08, 1.1, and 0.02 μmol/m2, while those for ROX were 1.6, 0.7, 2.4, 0.1, 0.5, and 0.05 μmol/m2, respectively. Besides adsorbing p-ASA/ROX, γ-MnO2 also caused their oxidation. Experimental results suggest that formation of inner-sphere complexes through the arsonic acid group is the primary mechanism for adsorption of p-ASA/ROX on iron (hydro)oxides and γ-MnO2, while outer-sphere complexation plays a critical role in their adsorption on α-Al2O3 and kaolinite. Adsorption of p-ASA/ROX on the metal (hydro)oxide and clay minerals was affected by solution pH, co-existing metal ions (Ca2+, Mg2+, Al3+, Cu2+, Fe3+, and Zn2+), oxyanions (H2PO4-, HCO3-, and SO42-), and humic acid. The solid-to-liquid partition coefficients of p-ASA during the desorption from α-Fe2O3, α-FeOOH, Fe(OH)3, α-Al2O3, γ-MnO2, and kaolinite were 0.47, 2.69, 4.38, 0.03, 30.4, and 0.1 L/g, while those of ROX were 0.28, 1.68, 3.48, 0.02, 4.0, and 0.02 L/g, respectively. Agricultural soils with lower contents of organic carbon exhibited higher adsorption capacities towards p-ASA/ROX, which indicates that soil minerals play a key role in the adsorption of phenylarsonic acid compounds while organic matter could have strong inhibitory effect. These findings could help better understand and predict the transport and fate of p-ASA/ROX in surface soils with low contents of organic matter.
Collapse
Affiliation(s)
- Xiande Xie
- MOE Laboratory for Earth Surface Processes, College of Urban and Environmental Sciences, Peking University, Beijing 100871, China; College of Resources and Environment, Hunan Agricultural University, Changsha 410128, China
| | - Hefa Cheng
- MOE Laboratory for Earth Surface Processes, College of Urban and Environmental Sciences, Peking University, Beijing 100871, China.
| |
Collapse
|
24
|
Yoo DK, Bhadra BN, Jhung SH. Adsorptive removal of hazardous organics from water and fuel with functionalized metal-organic frameworks: Contribution of functional groups. JOURNAL OF HAZARDOUS MATERIALS 2021; 403:123655. [PMID: 33264864 DOI: 10.1016/j.jhazmat.2020.123655] [Citation(s) in RCA: 57] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/03/2020] [Revised: 07/15/2020] [Accepted: 08/01/2020] [Indexed: 05/24/2023]
Abstract
The purification of contaminated water and fuel is very important for our sustainability. Adsorptive removal has attracted significant attention because of possible applications in industry and the rapid development of metal-organic frameworks (MOFs), which can be competitive adsorbents. In this review, the possible/competitive purification of water (contaminated with organics) and fuel (composed of S- and N-Containing compounds) via adsorption using MOFs, especially those with various functional groups (FGs), will be discussed. The contribution of FGs such as -OH, -COOH, -SO3H, -NH2, and -NH3+ to adsorption/purification will be analyzed in detail, not only to understand the plausible adsorption mechanism but also to utilize specific FGs in adsorption. Moreover, methods for introducing FGs onto MOFs will be summarized. Finally, the prospects for both adsorption/removal and emerging fields will be suggested. Studies for practical applications in industry with shaped MOFs from inexpensive route will be important. The solution pH should be considered for the adsorption of aqueous solution. Applications of MOFs in other fields like storage/delivery and enrichment of analytes might be deeply studied.
Collapse
Affiliation(s)
- Dong Kyu Yoo
- Department of Chemistry and Green-Nano Materials Research Center, Kyungpook National University, Daegu 41566, South Korea
| | - Biswa Nath Bhadra
- Department of Chemistry and Green-Nano Materials Research Center, Kyungpook National University, Daegu 41566, South Korea
| | - Sung Hwa Jhung
- Department of Chemistry and Green-Nano Materials Research Center, Kyungpook National University, Daegu 41566, South Korea.
| |
Collapse
|
25
|
Ahmed I, Mondol MMH, Lee HJ, Jhung SH. Application of Metal‐Organic Frameworks in Adsorptive Removal of Organic Contaminants from Water, Fuel and Air. Chem Asian J 2021; 16:185-196. [DOI: 10.1002/asia.202001365] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2020] [Revised: 12/17/2020] [Indexed: 12/14/2022]
Affiliation(s)
- Imteaz Ahmed
- Department of Chemistry and Green-Nano Materials Research Center Kyungpook National University Daegu 41566 Republic of Korea
| | - Md. Mahmudul Hassan Mondol
- Department of Chemistry and Green-Nano Materials Research Center Kyungpook National University Daegu 41566 Republic of Korea
| | - Hye Jin Lee
- Department of Chemistry and Green-Nano Materials Research Center Kyungpook National University Daegu 41566 Republic of Korea
| | - Sung Hwa Jhung
- Department of Chemistry and Green-Nano Materials Research Center Kyungpook National University Daegu 41566 Republic of Korea
| |
Collapse
|
26
|
Weerasundara L, Ok YS, Bundschuh J. Selective removal of arsenic in water: A critical review. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2021; 268:115668. [PMID: 33017746 DOI: 10.1016/j.envpol.2020.115668] [Citation(s) in RCA: 62] [Impact Index Per Article: 20.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/14/2020] [Revised: 09/13/2020] [Accepted: 09/14/2020] [Indexed: 05/28/2023]
Abstract
Selective removal of arsenic (As) is the key challenge for any of As removal mechanisms as this not only increases the efficiency of removal of the main As species (neutral As(III) and As(V) hydroxyl-anions) but also allows for a significant reduction of waste as it does not co-remove other solutes. Selective removal has a number of benefits: it increases the capacity and lifetime of units while lowering the cost of the process. Therefore, a sustainable selective mitigation method should be considered concerning the economic resources available, the ability of infrastructure to sustain water treatment, and the options for reuse and/or safe disposal of treatment residuals. Several methods of selective As removal have been developed, such as precipitation, adsorption and modified iron and ligand exchange. The biggest challenge in selective removal of As is the presence of phosphate in water which is chemically comparable with As(V). There are two types of mechanisms involved with As removal: Coulombic or ion exchange; and Lewis acid-base interaction. Solution pH is one of the major controlling factors limiting removal efficiency since most of the above-mentioned methods depend on complexation through electrostatic effects. The different features of two different As species make the selective removal process more difficult, especially under natural conditions. Most of the selective As removal methods involve hydrated Fe(III) oxides through Lewis acid-base interaction. Microbiological methods have been studied recently for selective removal of As, and although there have been only a small number of studies, the method shows remarkable results and indicates positive prospects for the future.
Collapse
Affiliation(s)
- Lakshika Weerasundara
- School of Civil Engineering and Surveying, Faculty of Health, Engineering and Sciences, University of Southern Queensland, West Street, Toowoomba, Queensland, 4350, Australia.
| | - Yong-Sik Ok
- Korea Biochar Research Center & Division of Environmental Science and Ecological Engineering, Korea University, Seoul, Republic of Korea.
| | - Jochen Bundschuh
- School of Civil Engineering and Surveying, Faculty of Health, Engineering and Sciences, University of Southern Queensland, West Street, Toowoomba, Queensland, 4350, Australia; UNESCO Chair on Groundwater Arsenic within the 2030 Agenda for Sustainable Development, University of Southern Queensland, West Street, Toowoomba, Queensland, 4350, Australia.
| |
Collapse
|
27
|
Huang L, Shen R, Shuai Q. Adsorptive removal of pharmaceuticals from water using metal-organic frameworks: A review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 277:111389. [PMID: 33069144 DOI: 10.1016/j.jenvman.2020.111389] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/16/2020] [Revised: 09/07/2020] [Accepted: 09/21/2020] [Indexed: 05/12/2023]
Abstract
Pharmaceutical pollution has emerged as a highly concerned issue due to its adverse effects. Elevated concentrations of pharmaceuticals in water should be regulated to satisfy the requirement for the provision of clean water. Metal-organic frameworks (MOFs) with high specific surface area, controllable porous structure, and facile modification can serve as promising adsorbents for the removal of pharmaceutical contaminants from water. In this review, a selected collection illustrating the reliable strategies and concepts to prepare the MOFs-based materials with superior water stability is described. In addition, recent progress on the adsorptive removal of pharmaceutical pollutant using burgeoning and functional MOFs is also summarized in terms of maximum capacity, equilibrium time, and regenerate ability. Meanwhile, to understand the adsorption mechanism, related interactions including coordination with unsaturated site, pore-filling effect, hydrogen bonding, electrostatic, and π-π stacking are further discussed. Finally, critical perspectives/assessment of future research emphasising on fabricating desirable MOFs and establishing structure-property relationships to facilitate capture performance are identified.
Collapse
Affiliation(s)
- Lijin Huang
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences (Wuhan), 388 Lumo Road, Wuhan, 430074, PR China.
| | - Rujia Shen
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences (Wuhan), 388 Lumo Road, Wuhan, 430074, PR China
| | - Qin Shuai
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences (Wuhan), 388 Lumo Road, Wuhan, 430074, PR China.
| |
Collapse
|
28
|
Jin E, Lee S, Kang E, Kim Y, Choe W. Metal-organic frameworks as advanced adsorbents for pharmaceutical and personal care products. Coord Chem Rev 2020. [DOI: 10.1016/j.ccr.2020.213526] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
29
|
Sun DW, Huang L, Pu H, Ma J. Introducing reticular chemistry into agrochemistry. Chem Soc Rev 2020; 50:1070-1110. [PMID: 33236735 DOI: 10.1039/c9cs00829b] [Citation(s) in RCA: 69] [Impact Index Per Article: 17.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
For survival and quality of life, human society has sought more productive, precise, and sustainable agriculture. Agrochemistry, which solves farming issues in a chemical manner, is the core engine that drives the evolution of modern agriculture. To date, agrochemistry has utilized chemical technologies in the form of pesticides, fertilizers, veterinary drugs and various functional materials to meet fundamental demands from human society, while increasing the socio-ecological consequences due to inefficient use. Thus, more useful, precise, and designable scaffolding materials are required to support sustainable agrochemistry. Reticular chemistry, which weaves molecular units into frameworks, has been applied in many fields based on two cutting-edge porous framework materials, namely metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). With flexibility in composition, structure, and pore chemistry, MOFs and COFs have shown increasing functionalities associated with agrochemistry in the last decade, potentially introducing reticular chemistry as a highly accessible chemical toolbox into agrochemical technologies. In this critical review, we will demonstrate how reticular chemistry shapes the future of agrochemistry in the fields of farm sensing, agro-ecological preservation and reutilization, agrochemical formulations, smart indoor farming, agrobiotechnology, and beyond.
Collapse
Affiliation(s)
- Da-Wen Sun
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510641, China.
| | | | | | | |
Collapse
|
30
|
Liu B, Liu Z, Wu H, Pan S, Cheng X, Sun Y, Xu Y. Effective and simultaneous removal of organic/inorganic arsenic using polymer-based hydrated iron oxide adsorbent: Capacity evaluation and mechanism. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 742:140508. [PMID: 32629256 DOI: 10.1016/j.scitotenv.2020.140508] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 06/19/2020] [Accepted: 06/23/2020] [Indexed: 06/11/2023]
Abstract
In this study, resin-based hydrated iron oxide (HFOR) composites were prepared and used as a functional adsorbent for the simultaneous removal of p-Arsanilic acid (p-ASA) and arsenate (As (V)). The effects of solution pH and coexisting substances on the adsorption of different arsenic species were also investigated. Results showed that the coexisting substances slightly affected the adsorption process of two arsenic species. Analysis of the adsorption behavior, isotherm equilibrium, and adsorption kinetics, as well as that results of the X-ray photoelectron spectroscopy, zeta potential, and other analytical methods revealed that the satisfactory adsorption performance of HFOR can be attributed to the electrostatic interactions induced by the positively charged groups and the coordination of the hydrated iron oxide nanoparticles, which exhibited excellent specific adsorption for both arsenic species. Moreover, HFOR showed high acid and alkali resistance and reusability, as well as a constant co-removal performance for different arsenic species in five consecutive operating cycles (55 mg As/g of As(V) and 18 mg/g of p-ASA). Results of continuous running fixed-bed column experiments confirmed that HFOR enabled excellent simultaneous adsorption for p-ASA and As(V).
Collapse
Affiliation(s)
- Biming Liu
- College of Biotechnology and Pharmaceutical Engineering, Nanjing Tech University, Nanjing 211800, China; School of Environmental Sciences and Engineering, Nanjing Tech University, Nanjing 211800, China
| | - Zhenxue Liu
- School of Environmental Sciences and Engineering, Nanjing Tech University, Nanjing 211800, China
| | - Haixia Wu
- College of Urban Construction, Nanjing Tech University, Nanjing 211800, China
| | - Shunlong Pan
- School of Environmental Sciences and Engineering, Nanjing Tech University, Nanjing 211800, China
| | - Xing Cheng
- School of Environmental Sciences and Engineering, Nanjing Tech University, Nanjing 211800, China
| | - Yongjun Sun
- College of Urban Construction, Nanjing Tech University, Nanjing 211800, China.
| | - Yanhua Xu
- School of Environmental Sciences and Engineering, Nanjing Tech University, Nanjing 211800, China.
| |
Collapse
|
31
|
Zhang X, Wang B, Alsalme A, Xiang S, Zhang Z, Chen B. Design and applications of water-stable metal-organic frameworks: status and challenges. Coord Chem Rev 2020. [DOI: 10.1016/j.ccr.2020.213507] [Citation(s) in RCA: 42] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
32
|
|
33
|
Rasheed T, Hassan AA, Bilal M, Hussain T, Rizwan K. Metal-organic frameworks based adsorbents: A review from removal perspective of various environmental contaminants from wastewater. CHEMOSPHERE 2020; 259:127369. [PMID: 32593814 DOI: 10.1016/j.chemosphere.2020.127369] [Citation(s) in RCA: 66] [Impact Index Per Article: 16.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/05/2020] [Revised: 06/04/2020] [Accepted: 06/07/2020] [Indexed: 06/11/2023]
Abstract
Rapidly increasing water contamination has turned into a major threat globally. The pollutants such as organic and inorganic compounds, heavy metals, and biological organisms are among the major contributor to water pollution. Therefore, the removal of these contaminants has attracted the researchers a lot. Various methodologies are being carried out for the purpose. Among them, the metal-organic frameworks (MOFs) with several active sites and tailorable porous architectures as adsorbents or photocatalytic removal agents is a fast-growing class of coordination chemistry to remove these agents from water. To date, numerous approaches dealing with water treatment including conservative and advanced technologies have been presented. This article thoroughly reviews the application of MOFs toward how to remove the toxic agents from water. The leading objective is to present up-to-date information and references regarding MOFs based materials toward wastewater treatment applications.
Collapse
Affiliation(s)
- Tahir Rasheed
- School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China.
| | - Adeel Ahmad Hassan
- School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China
| | - Muhamad Bilal
- School of Life Science and Food Engineering, Huaiyin Institute of Technology, Huaian, 223003, China
| | - Tariq Hussain
- Key Lab of Ocean Engineering, School of Naval Architecture Civil and Ocean Engineering Shanghai Jiao Tong University, 200240, China
| | - Komal Rizwan
- Department of Chemistry University of Sahiwal, Sahiwal, 57000, Pakistan.
| |
Collapse
|
34
|
Pang D, Wang CC, Wang P, Liu W, Fu H, Zhao C. Superior removal of inorganic and organic arsenic pollutants from water with MIL-88A(Fe) decorated on cotton fibers. CHEMOSPHERE 2020; 254:126829. [PMID: 32348928 DOI: 10.1016/j.chemosphere.2020.126829] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2020] [Revised: 04/14/2020] [Accepted: 04/16/2020] [Indexed: 06/11/2023]
Abstract
Arsenic contamination has attracted worldwide concerns, owing to its toxicity and severe threat to human and environment. It is urgent to develop efficient adsorbents to remove arsenic pollutants. Within this paper, both pristine MIL-88A(Fe) and MIL-88A(Fe) decorated on cotton fibers were successfully fabricated using an eco-friendly method. The pristine MIL-88A(Fe) displayed outstanding adsorption performances towards four selected arsenic pollutants, in which the adsorption capacities toward As(III), As(V), ROX and ASA were 126.5, 164.0, 261.4 and 427.5 mg g-1, respectively. Additionally, MIL-88A(Fe) exhibited excellent removal efficiencies in a wide pH range and with the presence of different co-existing ions. It was proposed that the coordinative interactions of As-O-Fe between arsenic pollutants and MIL-88A(Fe) contributed to the superior adsorption performances. Furthermore, two MIL-88A(Fe)/cotton fibers composites were synthesized by both post synthesis (MC-1) and in-situ synthesis (MC-2), which demonstrated identically outstanding adsorption activities toward four selected arsenic pollutants. MC-1 and MC-2 enhanced the stability and reusability of MIL-88A(Fe), which was challenging issues of pristine MIL-88A(Fe) powder. Additionally, the fixed-bed column packed by MC-1 or MC-2 can continuously eliminate arsenic pollutants from the water flow. This work provided a new possibility of metal-organic frameworks to accomplish potentially large-scale application to purify the arsenic-contaminated water.
Collapse
Affiliation(s)
- Da Pang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment Remediation, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China
| | - Chong-Chen Wang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment Remediation, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China.
| | - Peng Wang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment Remediation, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China
| | - Wen Liu
- The Key Laboratory of Water and Sediment Sciences, Ministry of Education, College of Environment Sciences and Engineering, Peking University, Beijing, 100871, China
| | - Huifen Fu
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment Remediation, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China
| | - Chen Zhao
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment Remediation, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China
| |
Collapse
|
35
|
Wang C, Zhang X, Wang J, Fu H, Wang P, Wang C. A new one‐dimensional coordination polymer synthesized from zinc and guanazole: Superior capture of organic arsenics. Appl Organomet Chem 2020. [DOI: 10.1002/aoc.5637] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Chao‐Yang Wang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment RemediationBeijing University of Civil Engineering and Architecture Beijing 100044 China
| | - Xiu‐Wu Zhang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment RemediationBeijing University of Civil Engineering and Architecture Beijing 100044 China
| | - Jia‐Wei Wang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment RemediationBeijing University of Civil Engineering and Architecture Beijing 100044 China
| | - Huifen Fu
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment RemediationBeijing University of Civil Engineering and Architecture Beijing 100044 China
| | - Peng Wang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment RemediationBeijing University of Civil Engineering and Architecture Beijing 100044 China
| | - Chong‐Chen Wang
- Beijing Key Laboratory of Functional Materials for Building Structure and Environment RemediationBeijing University of Civil Engineering and Architecture Beijing 100044 China
| |
Collapse
|
36
|
Yu X, Han X, Chang C, Hu Y, Xu CC, Fang S. Corncob-derived activated carbon for roxarsone removal from aqueous solution: isotherms, kinetics, and mechanism. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:15785-15797. [PMID: 32088818 DOI: 10.1007/s11356-020-07942-x] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/27/2019] [Accepted: 01/29/2020] [Indexed: 05/26/2023]
Abstract
In this study, the adsorption of roxarsone (ROX) onto corncob-derived activated carbon (AC) was optimized using response surface methodology (RSM). Following this, the AC was comprehensively characterized by FT-IR, SEM, and EDS analysis. The results showed that the highest ROX adsorption efficiency of 304.34 mg/g was obtained at the contact time of 262 min, initial pH of 2.5, adsorbent dosage of 0.4 g/L, and initial concentration of 240 mg/L. Besides, it was found that the adsorption equilibrium data was fitted well to the Langmuir and Sips isotherm models. The thermodynamic parameters (e.g., ΔG, ΔH, and ΔS) revealed the spontaneous and exothermic nature of ROX adsorption. As indicated by pseudo second-order kinetics model, the adsorption of ROX onto AC could be achieved through the hydrogen bond, π-π adsorbate-adsorbent interaction, and electrostatic interaction between AC surface functional group and molecular species variations of ROX at different pH values. Overall, it can be concluded that corncob-derived AC is an alternative option for removing ROX from aqueous solution.
Collapse
Affiliation(s)
- Xiao Yu
- School of Chemical Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
| | - Xiuli Han
- School of Chemical Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China.
- Henan Center for Outstanding Overseas Scientists, Zhengzhou, 450001, People's Republic of China.
| | - Chun Chang
- School of Chemical Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
- Henan Center for Outstanding Overseas Scientists, Zhengzhou, 450001, People's Republic of China
| | - Yulin Hu
- Department of Chemical and Biochemical Engineering, Western University, London, ON, N6A 5B9, Canada
| | - Chunbao Charles Xu
- Henan Center for Outstanding Overseas Scientists, Zhengzhou, 450001, People's Republic of China
- Department of Chemical and Biochemical Engineering, Western University, London, ON, N6A 5B9, Canada
| | - Shuqi Fang
- School of Chemical Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
- Henan Center for Outstanding Overseas Scientists, Zhengzhou, 450001, People's Republic of China
| |
Collapse
|
37
|
Facile synthesis of flower-like CoFe2O4 particles for efficient sorption of aromatic organoarsenicals from aqueous solution. J Colloid Interface Sci 2020; 568:63-75. [DOI: 10.1016/j.jcis.2020.02.004] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/03/2019] [Revised: 02/02/2020] [Accepted: 02/03/2020] [Indexed: 11/23/2022]
|
38
|
Li X, Wan J, Wang Y, Chi H, Yan Z, Ding S. Selective removal and persulfate catalytic decomposition of diethyl phthalate from contaminated water on modified MIL100 through surface molecular imprinting. CHEMOSPHERE 2020; 240:124875. [PMID: 31541899 DOI: 10.1016/j.chemosphere.2019.124875] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2018] [Revised: 07/26/2019] [Accepted: 09/14/2019] [Indexed: 05/11/2023]
Abstract
Adsorptive removal of phthalate esters from wastewater combined with their persulfate (PS) catalytic degradation has attracted the attention of many researchers. In this study, the adsorptive and catalytic properties of an MIL100 material obtained by a green synthetic route have been optimized by a surface molecular imprinting technique. Results have shown that there are two steps in the molecular imprinting process. A polymerization is first carried out in the internal channels of the material and the imprinting layer is then formed on the surface. The relative proportions of the starting materials for the synthesis have been optimized through the design of a three-dimensional response surface. The amount of pollutant adsorbed was increased fourfold after surface imprinting, reaching 13.6 mg g-1. The homogeneity of the recognition sites has been evaluated by dynamics calculations and the Freundlich equation. The selective adsorption ability of the material for diethyl phthalate was improved, and the process involved chemical adsorption. The catalytic properties of the material after imprinting were increased about 1.5-fold, indicating that selective adsorption is important. Such molecularly imprinted polymers may potentially serve as good functional materials for the removal of phthalate esters from wastewater.
Collapse
Affiliation(s)
- Xitong Li
- College of Environment and Energy, South China University of Technology, Guangzhou, 510006, China
| | - Jinquan Wan
- College of Environment and Energy, South China University of Technology, Guangzhou, 510006, China; Sino-Singapore International Joint Research Institute, Guangzhou, 510006, China; Guangdong Plant Fiber High-Valued Cleaning Utilization Engineering Technology Research Center, Guangzhou, 510006, China.
| | - Yan Wang
- College of Environment and Energy, South China University of Technology, Guangzhou, 510006, China; Sino-Singapore International Joint Research Institute, Guangzhou, 510006, China
| | - Haiyuan Chi
- College of Environment and Energy, South China University of Technology, Guangzhou, 510006, China
| | - Zhicheng Yan
- College of Environment and Energy, South China University of Technology, Guangzhou, 510006, China
| | - Su Ding
- College of Environment and Energy, South China University of Technology, Guangzhou, 510006, China
| |
Collapse
|
39
|
Ogiwara N, Kobayashi H, Inukai M, Nishiyama Y, Concepción P, Rey F, Kitagawa H. Ligand-Functionalization-Controlled Activity of Metal-Organic Framework-Encapsulated Pt Nanocatalyst toward Activation of Water. NANO LETTERS 2020; 20:426-432. [PMID: 31833371 DOI: 10.1021/acs.nanolett.9b04124] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
We first report the systematic control of the reactivity of H2O vapor in metal-organic frameworks (MOFs) with Pt nanocrystals (NCs) through ligand functionalization. We successfully synthesized Pt NCs covered with a water-stable MOF, UiO-66 (Pt@UiO-66), having different metal ions or functionalized ligands. The ligand functionalization of UiO-66 significantly affected the catalytic performance of the water-gas shift reaction, and the replacement of Zr4+ ions with Hf4+ ions in UiO-66 had no impact on the catalytic activity. The introduction of a -Br group lowered the reactivity of Pt@UiO-66 by nearly half, whereas the substitution of -Br with a -Me2 group triply enhanced the activity. The origin of the enhanced catalytic activity was found to be the change in H2O activity in the UiO-66 pores by the ligand functionalization, which was investigated using H2O sorption, solid-state NMR, X-ray photoelectron spectroscopy, and in situ IR measurements. This work opens a new prospect to develop MOFs as a platform to activate H2O.
Collapse
Affiliation(s)
- Naoki Ogiwara
- Division of Chemistry, Graduate School of Science , Kyoto University , Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto 606-8502 , Japan
| | - Hirokazu Kobayashi
- Division of Chemistry, Graduate School of Science , Kyoto University , Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto 606-8502 , Japan
- PRESTO, Japan Science and Technology Agency , 4-1-8 Honcho , Kawaguchi , Saitama 332-0012 , Japan
| | - Munehiro Inukai
- Graduate School of Science and Technology , Tokushima University , 2-1 minami-Josanjima-Cho , Tokushima 770-8506 , Japan
| | - Yusuke Nishiyama
- JEOL Resonance Inc. , 3-1-2 Musashino , Akishima , Tokyo 196-8558 , Japan
- RIKEN CLST-JEOL Collaboration Center , Yokohama , Kanagawa 230-0045 , Japan
| | - Patricia Concepción
- Instituto Universitario de Tecnología Química CSIC-UPV, Universitat Politècnica de València , Av. de los Naranjos s/n , 46022 Valencia , Spain
| | - Fernando Rey
- Instituto Universitario de Tecnología Química CSIC-UPV, Universitat Politècnica de València , Av. de los Naranjos s/n , 46022 Valencia , Spain
| | - Hiroshi Kitagawa
- Division of Chemistry, Graduate School of Science , Kyoto University , Kitashirakawa-Oiwakecho, Sakyo-ku, Kyoto 606-8502 , Japan
- Institute for Integrated Cell-Material Sciences, Institute for Advanced Study , Kyoto University , Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501 , Japan
| |
Collapse
|
40
|
Younis SA, Maitlo HA, Lee J, Kim KH. Nanotechnology-based sorption and membrane technologies for the treatment of petroleum-based pollutants in natural ecosystems and wastewater streams. Adv Colloid Interface Sci 2020; 275:102071. [PMID: 31806151 DOI: 10.1016/j.cis.2019.102071] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/07/2019] [Accepted: 11/12/2019] [Indexed: 12/31/2022]
Abstract
Petroleum processing wastewater (PPW) is a complex mixture of free, soluble, and emulsive hydrocarbons that often contain heavy metals and/or solid particles. As these hazardous constituents can accumulate in human beings and the environment, exposure to the PPW can have harmful effects in various respects. The use of environmental nanotechnologies (E-Nano) is considered an attractive option to resolve the problems associated with PPW. Among different treatment technologies, E-Nano-based sorption (adsorption/absorption) and membrane filtration approaches have been proven to have outstanding efficacy in remediation of PPW pollutants. It is, however, crucial to determine the appropriate technological option (e.g., low-cost operational conditions) for the practical application of such technologies. In this review, the potential of E-Nano-based sorption and membrane technologies in the treatment of various PPW pollutants is discussed based on their performances in comparison to traditional technologies. Their suitability is evaluated further in relation to their merits/disadvantages and economic feasibility with the goal of constructing a perspective map to efficiently implement the E-Nano technologies.
Collapse
|
41
|
Chaturvedi G, Kaur A, Umar A, Khan MA, Algarni H, Kansal SK. Removal of fluoroquinolone drug, levofloxacin, from aqueous phase over iron based MOFs, MIL-100(Fe). J SOLID STATE CHEM 2020. [DOI: 10.1016/j.jssc.2019.121029] [Citation(s) in RCA: 48] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
42
|
Jun BM, Hwang HS, Heo J, Han J, Jang M, Sohn J, Park CM, Yoon Y. Removal of selected endocrine-disrupting compounds using Al-based metal organic framework: Performance and mechanism of competitive adsorption. J IND ENG CHEM 2019. [DOI: 10.1016/j.jiec.2019.07.009] [Citation(s) in RCA: 54] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
43
|
Li Z, Liu X, Jin W, Hu Q, Zhao Y. Adsorption behavior of arsenicals on MIL-101(Fe): The role of arsenic chemical structures. J Colloid Interface Sci 2019; 554:692-704. [DOI: 10.1016/j.jcis.2019.07.046] [Citation(s) in RCA: 93] [Impact Index Per Article: 18.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2019] [Revised: 07/06/2019] [Accepted: 07/16/2019] [Indexed: 10/26/2022]
|
44
|
Wang C, Luan J, Wu C. Metal-organic frameworks for aquatic arsenic removal. WATER RESEARCH 2019; 158:370-382. [PMID: 31055017 DOI: 10.1016/j.watres.2019.04.043] [Citation(s) in RCA: 72] [Impact Index Per Article: 14.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2019] [Revised: 04/19/2019] [Accepted: 04/20/2019] [Indexed: 06/09/2023]
Abstract
Effective remediation of arsenic contaminated water remains a critical task from the environmental perspective, owing to the harmful effects of arsenic on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs) with excellent chemical stability and abundant functional groups represent a significant new addition to the area of capturing aquatic arsenic pollutants. This review focuses on the development of MOF-based materials for the efficient removal of toxic arsenic species from aqueous solutions. Aspects related to the materials' characteristics, application performance and interaction mechanisms are systematically studied, referencing the macroscopic experimental behaviors and microscopic spectroscopy analyses. The properties of various MOF-based materials are assessed and compared with those of other conventionally used materials. At last, insights and perspectives are suggested in terms of future research directions and development challenges. Overall, this class of materials demonstrates a promising potential for aquatic arsenic removal, and with a proper up-scaling development might it be used for practical applications in the near future.
Collapse
Affiliation(s)
- C Wang
- Beijing Research Institute of Chemical Industry, SINOPEC Group, Beijing, 100013, People's Republic of China.
| | - J Luan
- Beijing Research Institute of Chemical Industry, SINOPEC Group, Beijing, 100013, People's Republic of China
| | - C Wu
- Beijing Research Institute of Chemical Industry, SINOPEC Group, Beijing, 100013, People's Republic of China.
| |
Collapse
|
45
|
Barpaga D, Zheng J, Han KS, Soltis JA, Shutthanandan V, Basuray S, McGrail BP, Chatterjee S, Motkuri RK. Probing the Sorption of Perfluorooctanesulfonate Using Mesoporous Metal–Organic Frameworks from Aqueous Solutions. Inorg Chem 2019; 58:8339-8346. [DOI: 10.1021/acs.inorgchem.9b00380] [Citation(s) in RCA: 32] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Dushyant Barpaga
- Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Jian Zheng
- Physical and Computational Sciences Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Kee Sung Han
- Physical and Computational Sciences Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Jennifer A. Soltis
- Physical and Computational Sciences Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Vaithiyalingam Shutthanandan
- Earth and Biological Sciences Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Sagnik Basuray
- Department of Chemical and Materials Engineering, New Jersey Institute of Technology, Newark, New Jersey 07102, United States
| | - B. Peter McGrail
- Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Sayandev Chatterjee
- Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| | - Radha Kishan Motkuri
- Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99352, United States
| |
Collapse
|
46
|
Wang R, Xu H, Zhang K, Wei S, Deyong W. High-quality Al@Fe-MOF prepared using Fe-MOF as a micro-reactor to improve adsorption performance for selenite. JOURNAL OF HAZARDOUS MATERIALS 2019; 364:272-280. [PMID: 30384236 DOI: 10.1016/j.jhazmat.2018.10.030] [Citation(s) in RCA: 72] [Impact Index Per Article: 14.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/27/2018] [Revised: 10/07/2018] [Accepted: 10/11/2018] [Indexed: 05/26/2023]
Abstract
High-quality Al@Fe-MOF was prepared by in situ modification of Fe-MOF with Al3+ to improve the adsorption performance for selenite (Se(Ⅳ)). The structures and properties of Al@Fe-MOF were characterized by powder X-ray diffraction, high resolution transmission electron microscope, X-ray photoelectron spectroscopy (XPS), nitrogen isothermal adsorption-desorption measurement and zeta potential. The adsorption performance of Al@Fe-MOF for Se(Ⅳ) was studied by batch adsorption experiments. A large number of pores in Al@Fe-MOF were filled by AlOOH and some bayerite formed on the surfaces. Compared with those of Fe-MOF, the specific surface area (SSA) and microporosity of Al@Fe-MOF decreased to 1368 m2/g and 38.5%, respectively. Hydrolysis occurred at pH > 5.0 for Fe-MOF, but did not for Al@Fe-MOF at the pH range of 3.0-7.0. Compared with in Fe-MOF, the adsorption capacity and efficiency of SSA for Se(Ⅳ) were increased by 77% and 112%, and the average free energy of adsorption was increased to 11.62 kJ/mol in Al@Fe-MOF. Besides, the Se(Ⅳ) adsorption amount of Al@Fe-MOF was almost not influenced by the pH from 3.0 to 7.0. The high resolution XPS (HR-XPS) and pH analysis indicated that Al species in Al@Fe-MOF could significantly increase the density of adsorption sites to improve its adsorption capacity for Se(Ⅳ).
Collapse
Affiliation(s)
- Rui Wang
- Department of Chemistry and Environmental Engineering, Hubei University for Nationalities, Enshi, 445000, China
| | - Haijuan Xu
- Department of Chemistry and Environmental Engineering, Hubei University for Nationalities, Enshi, 445000, China
| | - Ke Zhang
- Department of Chemistry and Environmental Engineering, Hubei University for Nationalities, Enshi, 445000, China
| | - Shiyong Wei
- Department of Chemistry and Environmental Engineering, Hubei University for Nationalities, Enshi, 445000, China.
| | - Wu Deyong
- Department of Chemistry and Environmental Engineering, Hubei University for Nationalities, Enshi, 445000, China
| |
Collapse
|
47
|
You N, Wang XF, Li JY, Fan HT, Shen H, Zhang Q. Synergistic removal of arsanilic acid using adsorption and magnetic separation technique based on Fe3O4@ graphene nanocomposite. J IND ENG CHEM 2019. [DOI: 10.1016/j.jiec.2018.10.035] [Citation(s) in RCA: 51] [Impact Index Per Article: 10.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
48
|
Dhaka S, Kumar R, Deep A, Kurade MB, Ji SW, Jeon BH. Metal–organic frameworks (MOFs) for the removal of emerging contaminants from aquatic environments. Coord Chem Rev 2019. [DOI: 10.1016/j.ccr.2018.10.003] [Citation(s) in RCA: 310] [Impact Index Per Article: 62.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
|
49
|
Ramanayaka S, Vithanage M, Sarmah A, An T, Kim KH, Ok YS. Performance of metal–organic frameworks for the adsorptive removal of potentially toxic elements in a water system: a critical review. RSC Adv 2019; 9:34359-34376. [PMID: 35529979 PMCID: PMC9073907 DOI: 10.1039/c9ra06879a] [Citation(s) in RCA: 54] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2019] [Accepted: 10/11/2019] [Indexed: 12/13/2022] Open
Abstract
Elevated levels of potentially toxic elements (PTEs) in aqueous environments have drawn attention recently due to their presence and toxicity to living beings. There have been numerous attempts to remove PTEs from aqueous media. The potential of metal–organic frameworks (MOFs) in removing PTEs from aqueous media has been recognized due to their distinctive advantages (e.g., increased removal capability, large surface area, adjustable porosity, and recyclability). Because of the poor stability of MOFs in water, pre and post synthetic modification and functionalization of MOFs have also been developed for water treatment investigations. This review addresses the performance and mechanisms of PTE removal in various modified MOFs in detail. In order to compare the performance of MOFs, here we used partition coefficient (PC) instead of maximum adsorption capacity, which is sensitively influenced by initial loading concentrations. Therefore, the PC of each material was used to evaluate the adsorption performance of different MOFs and to compare with other sorbents. Furthermore, it discusses the scale-up issues and forthcoming pathway for the research and development needs of MOFs for effective PTE removal. This review further elucidates the main removal mechanisms of PTEs by MOFs. Commercial or domestic water treatment systems or water filters can utilize engineered MOFs to treat water by adsorptive removal. However, marketable products have yet to be investigated thoroughly due to limitations of the large-scale synthesis of MOFs. This review examines the performance of metal–organic frameworks based on partition coefficient data over the classic maximum adsorption capacities.![]()
Collapse
Affiliation(s)
- Sammani Ramanayaka
- Ecosphere Resilience Research Center
- Faculty of Applied Sciences
- University of Sri Jayewardenepura
- Nugegoda
- Sri Lanka
| | - Meththika Vithanage
- Ecosphere Resilience Research Center
- Faculty of Applied Sciences
- University of Sri Jayewardenepura
- Nugegoda
- Sri Lanka
| | - Ajit Sarmah
- Department of Civil & Environmental Engineering
- Faculty of Engineering
- The University of Auckland
- Auckland
- New Zealand
| | - Taicheng An
- Guangzhou Key Laboratory Environmental Catalysis and Pollution Control
- Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control
- School of Environmental Science and Engineering
- Institute of Environmental Health and Pollution Control
- Guangdong University of Technology
| | - Ki-Hyun Kim
- Air Quality & Materials Application Lab
- Department of Civil & Environmental Engineering
- Hanyang University
- South Korea
| | - Yong Sik Ok
- Korea Biochar Research Center
- O-Jeong Eco-Resilience Institute (OJERI)
- Division of Environmental Science and Ecological Engineering
- Korea University
- South Korea
| |
Collapse
|
50
|
Huang D, Liu Y, Liu Y, Di D, Wang H, Yang W. Preparation of metal–organic frameworks with bimetallic linkers and corresponding properties. NEW J CHEM 2019. [DOI: 10.1039/c9nj00433e] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A series of metal–organic frameworks (MOFs) with bimetallic linkers were synthesized through a facile reflux route.
Collapse
Affiliation(s)
- Dongdong Huang
- College of Chemistry and Chemical Engineering
- Northwest Normal University
- Lanzhou 730070
- P. R. China
- CAS Key Laboratory of Chemistry of Northwestern Plant Resources and Key Laboratory for Natural Medicine of Gansu Province
| | - Yi Liu
- CAS Key Laboratory of Chemistry of Northwestern Plant Resources and Key Laboratory for Natural Medicine of Gansu Province
- Lanzhou Institute of Chemical Physics
- Chinese Academy of Sciences (CAS)
- Lanzhou 730000
- P. R. China
| | - Yongfeng Liu
- CAS Key Laboratory of Chemistry of Northwestern Plant Resources and Key Laboratory for Natural Medicine of Gansu Province
- Lanzhou Institute of Chemical Physics
- Chinese Academy of Sciences (CAS)
- Lanzhou 730000
- P. R. China
| | - Duolong Di
- CAS Key Laboratory of Chemistry of Northwestern Plant Resources and Key Laboratory for Natural Medicine of Gansu Province
- Lanzhou Institute of Chemical Physics
- Chinese Academy of Sciences (CAS)
- Lanzhou 730000
- P. R. China
| | - Hao Wang
- CAS Key Laboratory of Chemistry of Northwestern Plant Resources and Key Laboratory for Natural Medicine of Gansu Province
- Lanzhou Institute of Chemical Physics
- Chinese Academy of Sciences (CAS)
- Lanzhou 730000
- P. R. China
| | - Wu Yang
- College of Chemistry and Chemical Engineering
- Northwest Normal University
- Lanzhou 730070
- P. R. China
| |
Collapse
|