Affinity peptide-based electrochemical biosensor with 2D-2D nanoarchitecture of nickel-chromium-layered double hydroxide and graphene oxide nanosheets for chirality detection of symmetric dimethylarginine

The accurate assessment of kidney dysfunction is crucial in clinical practice, necessitating the exploration of reliable biomarkers. However, current methods for measuring SDMA often fall short in terms of sensitivity and specificity. In this study, we employed phage display technology to identify high affinity peptides that specifically bind to SDMA. The selected peptide was subsequently integrated into a novel Ni-Cr layered double hydroxide-graphene oxide (NCL-GO) nanoarchitecture. We characterized the electrochemical properties of the biosensor using cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse voltammetry, systematically evaluating critical parameters such as limit of detection (LOD), reproducibility, and performance in complex biological matrices including urine. The NCL-GO architecture not only enhances the surface area available for electrochemical reactions but also facilitates rapid electron transfer kinetics which are essential for the accurate quantification of small molecule, SDMA. The electrochemical biosensor exhibited an outstanding limit of detection of 0.1 ng/mL in the 0-1 ng/mL range and 7.2 ng/mL in the 1-100 ng/mL range, demonstrating exceptional sensitivity and specificity for SDMA. Furthermore, the biosensor displayed excellent reproducibility with a relative standard deviation of 4.9%. Notably, it maintained robust chirality sensing capabilities, even in complex biological fluids. These findings suggest that this biosensor could play a pivotal role in early disease diagnosis and therapeutic monitoring, ultimately improving clinical outcomes and advancing biomedical research.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Nanomaterials in Targeting Cancer Cells with Nanotherapeutics: Transitioning Towards Responsive Systems

On a global scale, cancer is a difficult and devastating illness. Several problems with current chemotherapies include cytotoxicity, lack of selectivity, stem-like cell growth, and multi-drug resistance. The most appropriate nanomaterials for cancer treatment are those with characteristics, such as cytotoxicity, restricted specificity, and drug capacity and bioavailability; these materials are nanosized (1-100 nm). Nanodrugs are rarely licenced for therapeutic use despite growing research. These compounds need nanocarrier-targeted drug delivery experiments to improve their translation. This review describes new nanomaterials reported in the literature, impediments to their clinical studies, and their beneficial cancer therapeutic use. It also suggests ways to use nanomaterials in cancer therapy more efficiently and describes the intrinsic challenges of cancer treatment and the different nanocarriers and chemicals that can be utilised for specified tumour targeting. Furthermore, it provides a concise overview of cancer theranostics methods, with a focus on those that make use of nanomaterials. Although nanotechnology offers a great source for future advancements in cancer detection and therapy, there is an emerging need for more studies to address the present barriers to clinical translation.

Mimicking the extracellular matrix by incorporating functionalized graphene into hybrid hydrogels

The efficient functionalization of graphene with sulfonic groups using a sustainable approach facilitates the interaction of biomolecules with its surface. The inclusion of these graphene sheets inside a photopolymerized acrylamide-based hydrogel provides a 3D scaffold with viscoelastic behaviour closer to that found in natural tissues. Cell-culture experiments and differentiation assays with SH-SY5Y cells showed that these hybrid hydrogels are non-cytotoxic, thus making them potentially useful as scaffold materials mimicking the extracellular environment.

Graphene oxide membrane chemically modified by electron-transfer diazonium chemistry for efficient dye separation

By chemical modification of the graphene oxide (GO) surface via diazonium chemistry, we introduce nitrobenzene groups as new interlayer pillars to GO memebranes like the surface oxygen-containing functional groups. The larger pillar can finely enlarge the interlayer space of the GO membrane. The filtration performance of modified GO membranes with different mass ratios of nitrobenzene diazonium tetrafluoroborate (NDT) were tested for EB, DR81, and MB. Notably, when the GO : NDT ratio is 1 : 1, it is found that the water flux can be enhanced by more than twice and by nearly 1.4 times its value for EB and DR81, respectively, while maintaining a high rejection (92% for EB and 95% for DR81). In conclusion, the chemical modification of GO through the dediazonization reaction of NDT can indeed improve the separation efficiency of the dye.

Current Progress in Cancer Treatment Using Nanomaterials

The pathological processes of cancer are complex. Current methods used for chemotherapy have various limitations, such as cytotoxicity, multi-drug resistance, stem-like cells growth, and lack of specificity. Several types of nanomaterials are used for cancer treatment. Nanomaterials 1–100 nm in size have special optical, magnetic, and electrical characteristics. Nanomaterials have been fabricated for cancer treatments to overcome cytotoxicity and low specificity, and improve drug capacity and bioavailability. Despite the increasing number of related studies, few nanodrugs have been approved for clinical use. To improve translation of these materials, studies of targeted drug delivery using nanocarriers are needed. Cytotoxicity, enhanced permeability and retention effects, and the protective role of the protein corona remain to be addressed. This mini-review summarizes new nanomaterials manufactured in studies and in clinical use, analyses current barriers preventing their translation to clinical use, and describes the effective application of nanomaterials in cancer treatment.

Efficient solar removal of acetaminophen contaminant from water using flexible graphene composites functionalized with Ni@TiO2:W nanoparticles

This work presents the morphological, structural and photocatalytic properties of flexible graphene composites decorated with Ni@TiO₂:W nanoparticles (TiNiW NPs) with an average size of 27 ± 2 nm. The TiNiW NPs were immobilized on the surface of a flexible graphene composite using a PVA-based slurry-paste (FG/TiNiW composite). The SEM study showed that the TiNiW NPs remained exposed on the surface of the FG/TiNiW composite, which benefited its photocatalytic activity. The photocatalytic performance for the degradation of acetaminophen (ACT) was evaluated using both the TiNiW powders and the FG/TiNiW composite, obtaining maximum degradation efficiencies of 100 and 86%, respectively, after 3 h under natural solar irradiation. The degradation of ACT was caused mainly by the reactive oxygen species such as OH radicals and h⁺, which was confirmed by scavenger experiments. Photoluminescence, XPS and absorbance experiments revealed that oxygen vacancy defects were created by i) doping the TiNiW NPs with W and by ii) introducing graphene into the composites. These defects enhanced the absorbance of light in the range of 400-800 nm, which in turn, promoted the photocatalytic degradation of ACT. Moreover, the reuse experiments confirmed that both the TiNiW NPs and FG/TiNiW composite were very stable for the degradation of ACT, since degradation efficiencies >82% were obtained after 4 reuse cycles for both photocatalysts. The experimental findings of this work demonstrate that the flexible TiO₂/graphene composites are a feasible option for the removal of pharmaceutical contaminants from water using natural solar irradiation.

Effect of Hematite Doping with Aliovalent Impurities on the Electrochemical Performance of α-Fe2O3@rGO-Based Anodes in Sodium-Ion Batteries

The effect of the type of dopant (titanium and manganese) and of the reduced graphene oxide content (rGO, 30 or 50 wt %) of the α-Fe₂O₃@rGO nanocomposites on their microstructural properties and electrochemical performance was investigated. Nanostructured composites were synthesized by a simple one-step solvothermal method and evaluated as anode materials for sodium ion batteries. The doping does not influence the crystalline phase and morphology of the iron oxide nanoparticles, but remarkably increases stability and Coulombic efficiency with respect to the anode based on the composite α-Fe₂O₃@rGO. For fixed rGO content, Ti-doping improves the rate capability at lower rates, whereas Mn-doping enhances the electrode stability at higher rates, retaining a specific capacity of 56 mAhg^-1 at a rate of 2C. Nanocomposites with higher rGO content exhibit better electrochemical performance.

Structure, Defects, and Magnetism of Electrospun Hematite Nanofibers Silica-Coated by Atomic Layer Deposition

In the last years, hematite has been utilized in a plethora of applications. High aspect-ratio nanohematite and hematite/silica core-shell nanostructures are arousing growing interest for applications exploiting their magnetic properties. Atomic layer deposition (ALD) is utilized here to produce SiO₂-coated α-Fe₂O₃ nanofibers (NFs) through two synthetic routes, viz. electrospinning/calcination/ALD or electrospinning/ALD/calcination. The number of ALD cycles (10-100) modulates the coating thickness, while the chosen route controls the final nanostructure. Porous and partially hollow NFs are produced. Their hierarchical structure and the nature and density of the lattice defects and strain are characterized by combining electron microscopy, diffraction, and spectroscopy techniques. The uncoated hematite NFs mostly have surface-related strain, which is attributed to oxygen vacancies/Fe²⁺ sites. ALD coating causes microstrain release and decrease of surface states. NFs calcined after ALD have extensive bulk strain, which is ascribed to the presence of dislocations throughout the volume of the NF grains. Bulk strain determines the remanent magnetization, whereas both surface and bulk strain influence the coercive field and the thermal behavior across the Morin temperature, including the magnetic memory effect. To the best of the authors' knowledge, the correlation between lattice defects/strain and magnetic properties of SiO₂-coated α-Fe₂O₃ NFs has never been reported before.

Interactions between the Aryldiazonium Cations and Graphene Oxide: A DFT Study

Understanding the grafting behavior of the aryldiazonium cations is of fundamental and also of practical importance for the vast number of applications that involve the use of modified graphene oxide (from simple adsorption process to electronic and photovoltaic applications). In this work, the mechanism of the adsorption and grafting of diazonium cations on the graphene oxide surface was investigated by the use of density functional theory. Two types of aryldiazonium cations, one bearing only phenyl ring and the other nitrophenyl, were selected as adsorbates/grafted moiety. By evaluating the adsorption energies at 7 different positions onto the graphene oxide both in the gaseous and solvent phase (using COSMO approach), the most probable adsorption sites were found. Moreover, the most stable adsorption sites were used to calculate and plot NCI (noncovalent interactions). The obtained results are important as they not only give molecular insights regarding the nature of the interaction and its dependence on the adsorption site of the graphene oxide surface but also on the activation energy for such a grafting reaction to take place, providing a mechanistic aspect to understand these grafting reactions.

Toward Low-Cost and Sustainable Supercapacitor Electrode Processing: Simultaneous Carbon Grafting and Coating of Mixed-Valence Metal Oxides by Fast Annealing

There is a rapid market growth for supercapacitors and batteries based on new materials and production strategies that minimize their cost, end-of-life environmental impact, and waste management. Herein, mixed-valence iron oxide (FeO_x) and manganese oxide (Mn₃O₄) and FeO_x-carbon black (FeO_x-CB) electrodes with excellent pseudocapacitive behavior in 1 M Na₂SO₄ are produced by a one-step thermal annealing. Due to the in situ grafted carbon black, the FeO_x-CB shows a high pseudocapacitance of 408 mF cm⁻² (or 128 F g⁻¹), and Mn₃O₄ after activation shows high pseudocapacitance of 480 mF cm⁻² (192 F g⁻¹). The asymmetric supercapacitor based on FeO_x-CB and activated-Mn₃O₄ shows a capacitance of 260 mF cm⁻² at 100 mHz and a cycling stability of 97.4% over 800 cycles. Furthermore, due to its facile redox reactions, the supercapacitor can be voltammetrically cycled up to a high rate of 2,000 mV s⁻¹ without a significant distortion of the voltammograms. Overall, our data indicate the feasibility of developing high-performance supercapacitors based on mixed-valence iron and manganese oxide electrodes in a single step.

Surface modification of CoCr alloys by electrochemical reduction of diazonium salts

Tailoring the surface chemistry of CoCr alloys is of tremendous interest in many biomedical applications. In this work, we show that CoCr can be modified by diazonium electrografting provided the surface is not homogeneously covered with an oxide layer. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) show the electrografting of a poly(aminophenylene) (PAP) layer on CoCr when treated at a reductive potential (CoCr-0.5 V), whereas no PAP film was formed on CoCrOCP and CoCr1 V, treated at open circuit and anodic potentials respectively. Based on XPS results, we attributed the electrografting to the formation of carbide bonds between PAP and the inhomogeneous thin oxide layer of CoCr-0.5 V. We then show an example of application of PAP coatings on CoCr and prove that the presence of a PAP coating on CoCr-0.5 V results in a 5-fold increase of the adherence of poly methyl methacrylate (PMMA) to PAP-coated CoCr compared to uncoated samples; this is of prime significance to improving the long-term stability of dental prostheses. These findings support the importance of reducing the oxide layer for effective functionalization of metal oxides with aryl diazonium salts and suggest a promising surface modification approach for biomedical applications.

Chemical Functionalization of Graphene Family Members

Thanks to their outstanding physicochemical properties, graphene and its derivatives are interesting nanomaterials with a high potential in several fields. Graphene, graphene oxide, and reduced graphene oxide, however, differ partially in their characteristics due to their diverse surface composition. Those differences influence the chemical reactivity of these materials. In the following chapter the reactivity and main functionalization reactions performed on graphene, graphene oxide, and reduced graphene oxide are discussed. A part is also dedicated to the main analytical techniques used for characterization of these materials. Functionalization of graphene and its derivatives is highly important to modulate their characteristics and design graphene-based conjugates with novel properties. Functionalization can be covalent by forming strong and stable bonds with the graphene surface, or non-covalent via π–π, electrostatic, hydrophobic, and/or van der Waals interactions. Both types of functionalization are currently exploited.

Nanoconfined self-assembly on a grafted graphitic surface under electrochemical control

Highly oriented pyrolytic graphite (HOPG) can be covalently grafted with aryl radicals generated via the electrochemical reduction of 3,5-bis-tert-butyl-diazonium cations (3,5-TBD). The structure of the grafted layer and its stability under electrochemical conditions were assessed with electrochemical scanning tunneling microscopy (EC-STM) and cyclic voltammetry (CV). Stable within a wide (>2.5 V) electrochemical window, the grafted species can be locally removed using EC-STM-tip nanolithography. Using dibenzyl viologen as an example, we show that the generated nanocorrals of bare graphitic surface can be used to study nucleation and growth of self-assembled structures under conditions of nanoconfinement and electrochemical potential control.

Polarity governed selective amplification of through plane proton shuttling in proton exchange membrane fuel cells

Polarity governed amplification of fuel cell performance in graphene oxide-based proton exchange membrane fuel cells.

Protection of carbon steel corrosion in 3.5% NaCl medium by aryldiazonium grafted graphene coatings

Modification of CS/G by 1,8 ND containing two phenyl rings and two azo groups led to higher protection efficiency.