Labeling and Selective Inactivation of Gram-Positive Bacteria Employing Bimodal Photoprobes with Dual Readouts

Novel nanohybrid iron (II/III) phthalocyanine-based carbon nanotubes as catalysts for organic pollutant removal: process optimization by chemometric approach

In the present study, two iron phthalocyanine (FePc)-based nanocatalysts were synthesized and fully characterized. The carbon nanotubes (CNT) functionalized in an easy way with either Fe(II)Pc or Fe(III)Pc exhibit a very good catalytical activity. The activity in real wastewater effluent was comparable with the activity in distilled water. The procedure of modeling and optimizing with the assistance of chemometrics, utilizing design of experiments (DOE) and response surface methodology (RSM), revealed the conditions of optimum for decaying Reactive Yellow 84 on the nanocatalysts FePc_CNT. These optimal conditions included a catalyst dose of 1.70 g/L and an initial concentration (C0) of 20.0 mg/L. Under the indicated optimal conditions, the experimental findings verified that the removal efficiency was equal to Y = 98.92%, representing the highest observed value in this study. Under UVA light, after only 15 min of reaction, over 94% of dye was removed using both catalysts. The reuse experiments show that the activity of both nanohybrid material based on FePc-CNT slightly decreases over four consecutive runs. The quenching experiments show that RY84 was removed through radical pathways (O2•- and •OH) as well as non-radical pathways (1O2 and direct electron transfer).

Peptidoglycan-Directed Chemical Ligation for Selective Inhibition on Gram-Positive Bacteria

Microbicides with distinct antibacterial mechanisms show potential to combat multi-drug resistance bacteria. We herein report peptidoglycan-directed chemical ligation (PGCL) between alkyne-bearing vancomycin and an azide-tagged cationic polymer. The former binds peptidoglycan and inhibits peptidoglycan crosslinking, while the latter interferes the integrity of the bacterial membrane. PGCL results in enhanced bactericidal activity against Gram-positive Staphylococcus aureus (S. aureus) over Gram-negative Escherichia coli (E. coli). These data indicate the potential of PGCL to selectively and synergistically inhibit Gram-positive pathogens via dual modality antibacterial mechanisms of peptidoglycan-inhibiting antibiotics and bacterial membrane-disrupting polycations.

Photodynamic treatment of pathogens

The current viral pandemic has highlighted the compelling need for effective and versatile treatments, that can be quickly tuned to tackle new threats, and are robust against mutations. Development of such treatments is made even more urgent in view of the decreasing effectiveness of current antibiotics, that makes microbial infections the next emerging global threat. Photodynamic effect is one such method. It relies on physical processes proceeding from excited states of particular organic molecules, called photosensitizers, generated upon absorption of visible or near infrared light. The excited states of these molecules, tailored to undergo efficient intersystem crossing, interact with molecular oxygen and generate short lived reactive oxygen species (ROS), mostly singlet oxygen. These species are highly cytotoxic through non-specific oxidation reactions and constitute the basis of the treatment. In spite of the apparent simplicity of the principle, the method still has to face important challenges. For instance, the short lifetime of ROS means that the photosensitizer must reach the target within a few tens nanometers, which requires proper molecular engineering at the nanoscale level. Photoactive nanostructures thus engineered should ideally comprise a functionality that turns the system into a theranostic means, for instance, through introduction of fluorophores suitable for nanoscopy. We discuss the principles of the method and the current molecular strategies that have been and still are being explored in antimicrobial and antiviral photodynamic treatment.

Regulation of photo triggered cytotoxicity in electrospun nanomaterials: role of photosensitizer binding mode and polymer identity

Although electrospun nanomaterials containing photoactive dyes currently compete with the present state of art antimicrobial materials, relatively few structure-activity relationships have been established to identify the role of carrier polymer and photosensitizer binding mode on the performance of the materials. In this study scaffolds composed of poly(vinyl alcohol), polyacrylonitrile, poly(caprolactone), and tailor-made phthalocyanine-based photosensitizers are developed utilizing electrospinning as a simple, time and cost-effective method. The photoinduced activity of nanofibrous materials was characterized in vitro against E. coli and B. subtilis as models for Gram-negative and Gram-positive bacteria respectively, as well as against bacteriophages phi6 and MS2 as models for enveloped and non-enveloped viruses respectively. For the first time, we show how polymer-specific properties affect antifouling and antimicrobial activity of the nanofibrous material, indicating that the most promising way to increase efficiency is likely via methods that focus on increasing the number of short, but strong and reversible bacteria-surface interactions.

Umbelliferone Decorated Water-soluble Zinc(II) Phthalocyanines - In Vitro Phototoxic Antimicrobial Anti-cancer Agents

In this contribution we report on the synthesis, characterization and application of water-soluble zinc(II) phthalocyanines, which are decorated with four or eight umbelliferone moieties for photodynamic therapy (PDT). These compounds are linked peripherally to zinc(II) phthalocyanine by a triethylene glycol linker attached to pyridines, leading to cationic pyridinium units, able to increase the water solubility of the system. Beside their photophysical properties they were analyzed concerning their cellular distribution in human hepatocyte carcinoma (HepG2) cells as well as their phototoxicity towards HepG2 cells, Gram-positive (S. aureus strain 3150/12 and B. subtilis strain DB104) and Gram-negative bacteria (E. coli strain UTI89 and E. coli strain Nissle 1917). At low light doses and concentrations, they exhibit superb antimicrobial activity against Gram-positive bacteria as well as anti-tumor activity against HepG2. They are even capable to inactivate Gram-negative bacteria, whereas the dark toxicity remains low. These unique water-soluble compounds can be regarded as all-in-one type photosensitizers with broad applications ranges in the future.

Conjugated Pt(II) Complexes as Luminescence-Switch-On Reporters Addressing the Microenvironment of Bacterial Biofilms

In this work, the synthesis, structural and photophysical characterization of six phosphorescent H₂O-soluble Pt(II) complexes are reported while addressing their emission maxima, photoluminescence quantum yields (Φ_L), lifetimes (τ), aggregation tendency, and microenvironment sensitivity as a function of the substitution pattern on the main tridentate luminophore. Different ancillary ligands, namely, a trisulfonated phosphane and maltohexaose-conjugated pyridines (with or without amide bridges), were introduced and evaluated for the realization of switch-on-photoluminescent labels reporting on the microenvironment sensed in biofilms of Gram⁺ and Gram^- models, namely, Staphylococcus aureus and Escherichia coli. With the aid of confocal luminescence micro(spectro)scopy, we observed that selected complexes specifically interact with the biofilms while leaving planktonic cells unlabeled. By using photoluminescence lifetime imaging microscopy, excited-state lifetimes within S. aureus biofilms were measured. The photoluminescence intensities were drastically boosted, and the excited state lifetimes were significantly prolonged upon binding to the viscous biofilm matrix, mainly due to the suppression of radiationless deactivation pathways upon shielding from physical quenching processes, such as interactions with solvent molecules and ³O₂. The best performances were attained for non-aggregating complexes with maltohexaose targeting units and without amide bridges. Notably, in the absence of the maltodextrin, a hydrophobic adamantyl moiety suffices to attain a sizeable labeling capacity. Moreover, photoluminescence studies showed that selected complexes can also effectively interact with E. coli biofilms, where the bacterial cells are able to partially uptake the maltodextrin-based agents. In summary, the herein introduced concepts enable the development of specific biofilm reporters providing spatial resolution as well as lifetime- and spectrum-based readouts. Considering that most theragnostic agents reported so far mainly address metabolically active bacteria at the surface of biofilms but without reaching cells deeply immersed in the matrix, a new platform with a clear structure-property correlation is provided for the early detection of such bacterial arrays.

Silicon Tetrapyrazinoporphyrazine Derivatives-Incorporated Carbohydrate-Based Block Copolymer Micelles for Photodynamic Therapy

Developing nonaggregated photosensitizers (PSs) for efficient photodynamic therapy (PDT) using polymeric micelles (PMs) has been challenging. In this study, axially substituted nonaggregated silicon tetrapyrazinoporphyrazine (SiTPyzPz) derivatives in carbohydrate-based block glycopolymer-based PMs were designed and used as PSs for PDT. To achieve the nonaggregated PSs, SiTPyzPz was axially substituted with trihexylsiloxy (THS) groups to form SiTPyzPz-THS, which exhibited highly monomeric behaviors in organic solvents. Moreover, three block copolymers were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Each copolymer comprised hydrophobic polystyrene blocks and loadable SiTPyzPz-THS, and one or two consisted of two possible hydrophilic blocks, polyethylene glycol or poly(glucosylethyl methacrylate). The self-assembly of SiTPyzPz-THS and the block copolymers in aqueous solvents induced the formation of spherical PMs with core-shell or core-shell-corona structures. The SiTPyzPz-THS in the PMs exhibited monomeric state, intense fluorescence emission, and outstanding singlet oxygen generation; moreover, it did not form aggregates. During the in vitro test, which was performed to investigate the PDT efficiency, the PMs, which consisted of poly(glucosylethyl methacrylate) shells, exhibited high photocytotoxicity and cellular internalization ability. Consequently, the PM systems of nonaggregated PSs and carbohydrate-based block copolymers could become very promising materials for PDT owing to their photophysicochemical properties and considerable selectivity against cancer cells.

More is less: Creation of pathogenic microbe-related theranostic oriented AIEgens

Theranostic agents based on photo-dynamic therapy exhibited the properties of the noninvasive feature, spatial-temporal control and be free of drug resistance. Herein, based on the principle of "More is Less", a multifunctional nanoprobe for selective lighting-up of fungi and targeted anti-microbes was designed and achieved. The introducing of the hydroxyl groups and alkaline diethylamino moiety facilitate the probe with well aggregation-induced emission feature, good selectivity towards fungi and acid responsiveness. This probe could only light-up fungi with bright fluorescence, and exhibited diversity anti-microbe behavior towards different microbes. Moreover, the in vitro and in vivo eradication of the supergerm of methicillin resistant staphylococcus aureus was achieved by the treatment of the probe. Confidently, this well-designed nanoprobe is anticipated to have great potential in infective theranostic applications in clinic.

Turning Photons into Drugs: Phthalocyanine-Based Photosensitizers as Efficient Photoantimicrobials

One of the most promising alternatives for treating bacterial infections is antimicrobial photodynamic therapy (aPDT), making the synthesis and application of new photoactive compounds called photosensitizers (PS) a dynamic research field. In this regard, phthalocyanine (Pc) derivatives offer great opportunities due to their extraordinary light-harvesting and tunable electronic properties, structural versatility, and stability. This Review, rather than focusing on synthetic strategies, intends to overview current progress in the structural design strategies for Pcs that could achieve effective photoinactivation of microorganisms. In addition, the Review provides a concise look into the recent developments and applications of nanocarrier-based Pc delivery systems.

Sensitive Detection of Broad-Spectrum Bacteria with Small-Molecule Fluorescent Excimer Chemosensors

Antibiotic resistance is a major problem for world health, triggered by the unnecessary usage of broad-spectrum antibiotics on purportedly infected patients. Current clinical standards require lengthy protocols for the detection of bacterial species in sterile physiological fluids. In this work, a class of small-molecule fluorescent chemosensors termed ProxyPhos was shown to be capable of rapid, sensitive, and facile detection of broad-spectrum bacteria. The sensors act via a turn-on fluorescent excimer mechanism, where close-proximity binding of multiple sensor units amplifies a red shift emission signal. ProxyPhos sensors were able to detect down to 10 CFUs of model strains by flow cytometry assays and showed selectivity over mammalian cells in a bacterial coculture through fluorescence microscopy. The studies reveal that the zinc(II)-chelates cyclen and cyclam are novel and effective binding units for the detection of both Gram-negative and Gram-positive bacterial strains. Mode of action studies revealed that the chemosensors detect Gram-negative and Gram-positive strains with two distinct mechanisms. Preliminary studies applying ProxyPhos sensors to sterile physiological fluids (cerebrospinal fluid) in flow cytometry assays were successful. The results suggest that ProxyPhos sensors can be developed as a rapid, inexpensive, and robust tool for the "yes-no" detection of broad-spectrum bacteria in sterile fluids.

π-Extended Donor-Acceptor Porphyrins and Metalloporphyrins for Antimicrobial Photodynamic Inactivation

Free base, zinc and palladium π‐extended porphyrins containing fused naphthalenediamide units were employed as photosensitizers in antimicrobial photodynamic therapy (aPDT). Their efficacy, assessed by photophysical and in vitro photobiological studies on Gram‐positive bacteria, was found to depend on metal coordination, showing a dramatic enhancement of photosensitizing activity for the palladium complex.

Facile Fabrication of Silicon(IV)Phthalocyanine-Embedded Poly(vinyl alcohol)-Based Antibacterial and Antifouling Interfaces

Interest in the photodynamic inactivation of bacteria as an alternative method to antibiotic treatment continues to grow. Based on this approach, light-activated anti-infective interfaces could be fabricated via incorporation of photosensitizers into the polymer-based materials. In order to combine photobactericidal and antifouling functions, the choice of the carrier polymer is of particular significance: it should enable fast and effective conjugation of photosensitizer and reduce the formation of bioburden on the artificial material in a biological environment. This study reports one-pot fabrication and characterization of two silicon(IV)phthalocyanine /poly(vinyl alcohol)-based electrospun mats. The method relies on the thermal cross-linking of components by esterification using sebacic acid as a cross-linking agent. Fabricated flexible mats showed photosensitizer-dependent antibacterial photoactivity against different Gram-positive bacteria with low cytotoxic effects on human fibroblasts and were effective against bacterial attachment, as an early step toward future biofilm formation. This work provides practical guidelines in developing photoactive materials and interfaces that can be used in nonadhesive wound dressings, food packaging, water, and air filtration.

Contemporary approaches and future perspectives of antibacterial photodynamic therapy (aPDT) against methicillin-resistant Staphylococcus aureus (MRSA): A systematic review

The high prevalence of methicillin-resistant Staphylococcus aureus (MRSA) causing skin and soft tissue infections in both the community and healthcare settings challenges the limited options of effective antibiotics and motivates the search for alternative therapeutic solutions, such as antibacterial photodynamic therapy (aPDT). While many publications have described the promising anti-bacterial activities of PDT in vitro, its applications in vivo and in the clinic have been very limited. This limited availability may in part be due to variabilities in the selected photosensitizing agents (PS), the variable testing conditions used to examine anti-bacterial activities and their effectiveness in treating MRSA infections. We thus sought to systematically review and examine the evidence from existing studies on aPDT associated with MRSA and to critically appraise its current state of development and areas to be addressed in future studies. In 2018, we developed and registered a review protocol in the International Prospective Register of Systematic Reviews (PROSPERO) with registration No: CRD42018086736. Three bibliographical databases were consulted (PUBMED, MEDLINE, and EMBASE), and a total of 113 studies were included in this systematic review based on our eligibility criteria. Many variables, such as the use of a wide range of solvents, pre-irradiation times, irradiation times, light sources and light doses, have been used in the methods reported by researchers, which significantly affect the inter-study comparability and results. On another note, new approaches of linking immunoglobulin G (IgG), antibodies, efflux pump inhibitors, and bacteriophages with photosensitizers (PSs) and the incorporation of PSs into nano-scale delivery systems exert a direct effect on improving aPDT. Enhanced activities have also been achieved by optimizing the physicochemical properties of the PSs, such as the introduction of highly lipophilic, poly-cationic and site-specific modifications of the compounds. However, few in vivo studies (n = 17) have been conducted to translate aPDT into preclinical studies. We anticipate that further standardization of the experimental conditions and assessing the efficacy in vivo would allow this technology to be further applied in preclinical trials, so that aPDT would develop to become a sustainable, alternative therapeutic option against MRSA infection in the future.

Porphyrinoid-Cyclodextrin Assemblies in Biomedical Research: An Update

Porphyrinoids, well-known cofactors in fundamental processes of life, have stimulated interest as synthetic models of natural systems and integral components of photodynamic therapy, but their utilization is compromised by self-aggregation in aqueous media. The capacity of cyclodextrins to include hydrophobic molecules in their cavity provides porphyrinoids with a protective environment against oxidation and the ability to disperse efficiently in biological fluids. Moreover, engineered cyclodextrin-porphyrinoid assemblies enhance the photodynamic abilities of porphyrinoids, can carry chemotherapeutics for synergistic modalities, and can be enriched with functions including cell recognition, tissue penetration, and imaging. This Perspective includes synthetic porphyrinoid-cyclodextrin models of proteins participating in fundamental processes, such as enzymatic catalysis, respiration, and electron transfer. In addition, since porphyrinoid-cyclodextrin systems comprise third generation photosensitizers, recent developments for their utilization in photomedicine, that is, multimodal therapy for cancer (e.g., PDT, PTT) and antimicrobial treatment, and eventually in biocompatible therapeutic or diagnostic platforms for next-generation nanomedicine and theranostics are discussed.

Determining and unravelling origins of reduced photoinactivation efficacy of bacteria in milk

Bovine mastitis is an endemic disease of dairy cattle that is considered to be one of the most frequent and costly diseases in veterinary medicine. An increase in the incidence of disease results in the increased use of antibiotics, which in turn increases the potential of bacterial resistance. This study aimed to investigate the effectiveness of antimicrobial photodynamic therapy (aPDT) in the treatment of bovine mastitis, as an alternative to systemic antibiotics. To identify the key factors affecting photoinactivation efficacy, realistic experiments in view of the end-use were conducted in milk samples using two different photosensitizers: methylene blue (MB) and silicon (IV) phthalocyanine derivative (SiPc). We explored the effects of divalent ions and fat content on the aPDT outcome and determined influence of different proteins on aPDT efficacy. Levels of bacterial sensitivity to PSs varied depending on the type of bacteria (Gram-positive vs. Gram-negative) and light exposure time. Critical interrelated factors affecting aPDT in milk were identified and an efficient combination of treatment conditions that can lead to a full photodynamic inactivation of bacteria was determined.

Modular synthesis of silicon (IV) phthalocyanine conjugates bearing glycosylated axial ligands

Phthalocyanines (Pcs) are near-infrared photosensitizers with therapeutic potential for the treatment of bacterial infections and cancer. However, their clinical utility has been hindered by poor solubility in biological fluids, lack of specificity, and limited clearance from affected tissues. Glycosylated Pcs have the potential to overcome these issues by providing increased solubility and tumor specific targeting. However, reliable methods for their synthesis remains challenging. Here we present our first approach towards the synthesis of a series of silicon (IV) phthalocyanine conjugates bearing axial carbohydrate ligands (CPcCs). The novelty of our approach lies in the installation of axial alkyne ligands which can be functionalized with readily accessible acetyl protected azido glycosides, thus providing a modular approach for the synthesis of these complex macromolecules.

Axially Decorated SiIV -phthalocyanines Bearing Mannose- or Ammonium-conjugated Siloxanes: Comparative Bacterial Labeling and Photodynamic Inactivation<sup/>

Herein, we present a comparative study about the photoinactivation of Staphylococcus aureus (Gram-positive model) and Escherichia coli (Gram-negative model) employing a neutral and a dicationic axially functionalized Si^IV -phthalocyanine. Depending on the charge of the siloxane moiety (neutral monosaccharide or cationic ammonium salt), different interactions with the bacteria were observed, and a differential photoinactivation was facilitated. The intensity of the fluorescence labeling correlated with the photoinactivation of the two types of bacteria: While the neutral species only significantly affected the Gram-positive cells, we observed that the positively charged photosensitizer interacted both with the Gram-positive and with the Gram-negative models. The dicationic photosensitizer labeled both models with a characteristic deep-red fluorescence and photoinactivated both classes of prokaryotes. In general, our study clearly demonstrates that axially ammoniumsiloxane-functionalized Si(IV) phthalocyaninates constitute excellent photosensitizers due to their weak aggregation in aqueous environments. In particular, we also show that charge-based targeting with axial ammonium groups leads toward broad-spectrum Si^IV -phthalocyanines for photodynamic inactivation of bacteria.

Breaching the wall: morphological control of efficacy of phthalocyanine-based photoantimicrobials

In this paper, photophysical, theoretical and biological studies are combined, highlighting the importance of different characteristics for designing new and more effective PSs.

Photonic monitoring of treatment during infection and sepsis: development of new detection strategies and potential clinical applications

Despite the strong decline in the infection-associated mortality since the development of the first antibiotics, infectious diseases are still a major cause of death in the world. With the rising number of antibiotic-resistant pathogens, the incidence of deaths caused by infections may increase strongly in the future. Survival rates in sepsis, which occurs when body response to infections becomes uncontrolled, are still very poor if an adequate therapy is not initiated immediately. Therefore, approaches to monitor the treatment efficacy are crucially needed to adapt therapeutic strategies according to the patient's response. An increasing number of photonic technologies are being considered for diagnostic purpose and monitoring of therapeutic response; however many of these strategies have not been introduced into clinical routine, yet. Here, we review photonic strategies to monitor response to treatment in patients with infectious disease, sepsis, and septic shock. We also include some selected approaches for the development of new drugs in animal models as well as new monitoring strategies which might be applicable to evaluate treatment response in humans in the future. Figure Label-free probing of blood properties using photonics.

Boronic Acid Functionalized Photosensitizers: A Strategy To Target the Surface of Bacteria and Implement Active Agents in Polymer Coatings

Advanced methods for preventing and controlling hospital-acquired infections via eradication of free-floating bacteria and bacterial biofilms are of great interest. In this regard, the attractiveness of unconventional treatment modalities such as antimicrobial photodynamic therapy (aPDT) continues to grow. This study investigated a new and innovative strategy for targeting polysaccharides found on the bacterial cell envelope and the biofilm matrix using the boronic acid functionalized and highly effective photosensitizer (PS) silicon(IV) phthalocyanine. This strategy has been found to be successful in treating planktonic cultures and biofilms of Gram-negative E. coli. An additional advantage of boronic acid functionality is a possibility to anchor the tailor made PS to poly(vinyl alcohol) and to fabricate a self-disinfecting coating.

Spatiotemporally Resolved Tracking of Bacterial Responses to ROS-Mediated Damage at the Single-Cell Level with Quantitative Functional Microscopy

Herein we report on the implementation of photofunctional microparticles in combination with optical tweezers for the investigation of bacterial responses to oxidative stress by means of quantitative functional microscopy. A combination of a strongly hydrophobic axially substituted Si(IV) phthalocyanine adsorbed onto silica microparticles was developed, and the structural and photophysical characterization was carried out. The microparticles are able to produce reactive oxygen species under the fluorescence microscope upon irradiation with red light, and the behavior of individual bacteria can be consequently investigated in situ and in real time at the single cell level. For this purpose, a methodology was introduced to monitor phototriggered changes with spatiotemporal resolution. The defined distance between the photoactive particles and individual bacteria can be fixed under the microscope before the photosensitization process is started, and the photoinduced damage can be monitored by tracing the time-dependent fluorescence turn-on of a suitable marker. The results showed a distance-dependent photoinduced death time, defined as the onset of the incorporation of propidium iodide. Our methodology constitutes a new tool for the in vitro design and evaluation of photosensitizers for the treatment of cancer and infectious diseases with the aid of functional optical microscopy, as it enables a quantitative response evaluation of living systems toward oxidative stress. More generally, it provides a way to understand the response of an ensemble of living entities to reactive oxygen species by analyzing the behavior of a set of individual organisms.

Silicon(IV) Phthalocyanine-Decorated Cyclodextrin Vesicles as a Self-Assembled Phototherapeutic Agent against MRSA

The host-guest complexation of a tailored Si(IV) phthalocyanine with supramolecular β-cyclodextrin vesicles (CDV) was studied, revealing a reduced aggregation of the photoactive center upon binding to the CDV, even in aqueous environments. For this purpose, a photosensitizing unit axially decorated with one adamantyl group and one pyridinium moiety on the other side was obtained by two successive click reactions on a bis-azido-functionalized derivative of Si(IV) phthalocyanine. To evaluate its potential as a photosensitizer against antibiotic-resistant bacteria, comparative studies of the photophysical properties including absorption and emission spectroscopy, lifetimes as well as fluorescence and singlet oxygen quantum yields were determined for the Si(IV) phthalocyanine alone and upon self-assembly on the CDV surface. In vitro phototoxicity against the methicillin-resistant Staphylococcus aureus (MRSA) USA300 was evaluated, showing an almost complete inactivation.

A combined experimental and computational study of the substituent effect on the photodynamic efficacy of amphiphilic Zn(ii)phthalocyanines

The interplay between structural features, photophysical characteristics and photodynamic efficacy of carbohydrate substituted amphiphilic Zn(ii)phthalocyanines is presented.