Photochemical Reduction of CO2 with Visible Light Using a Polyoxometalate as Photoreductant

Organic-Inorganic Hybrid Films of the Sulfate Dawson Polyoxometalate, [S2W18O62]4-, and Polypyrrole for Iodate Electrocatalysis

The Dawson-type sulfate polyoxometalate (POM) [S₂W₁₈O₆₂]^4- has successfully been entrapped in polypyrrole (PPy) films on glassy carbon electrode (GCE) surfaces through pyrrole electropolymerization. Films of varying POM loadings (i.e., thickness) were grown by chronocoulometry. Film-coated electrodes were then characterized using voltammetry, revealing POM surface coverages ranging from 1.9 to 11.7 × 10^-9 mol·cm^-2, and were stable over 100 redox cycles. Typical film morphology and composition were revealed to be porous using atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy, and the effects of this porosity on POM redox activity were probed using AC impedance. The hybrid organic-inorganic films exhibited a good electrocatalytic response toward the reduction of iodate with a sensitivity of 0.769 μA·cm^-2·μM^-1.

Ultrahigh Photocatalytic CO2 Reduction Efficiency and Selectivity Manipulation by Single-Tungsten-Atom Oxide at the Atomic Step of TiO2

The photocatalytic CO₂ reduction reaction is a sustainable route to the direct conversion of greenhouse gases into chemicals without additional energy consumption. Given the vast amount of greenhouse gas, numerous efforts have been devoted to developing inorganic photocatalysts, e.g., titanium dioxide (TiO₂ ), due to their stability, low cost, and environmentally friendly properties. However, a more efficient TiO₂ photocatalyst without noble metals is highly desirable for CO₂ reduction, and it is both difficult and urgent to produce selectively valuable compounds. Here, a novel "single-atom site at the atomic step" strategy is developed by anchoring a single tungsten (W) atom site with oxygen-coordination at the intrinsic steps of classic TiO₂ nanoparticles. The composition of active sites for CO₂ reduction can be controlled by tuning the additional W⁵⁺ to form W⁵⁺ -O-Ti³⁺ sites, resulting in both significant CO₂ reduction efficiency with 60.6 μmol g^{- 1} h^{- 1} and selectivity for methane (CH₄ ) over carbon monoxide (CO), which exceeds those of pristine TiO₂ by more than one order of magnitude. The mechanism relies on the accurate control of the single-atom sites at step with 22.8% coverage of surface sites and the subsequent excellent electron-hole separation along with the favorable adsorption-desorption of intermediates at the sites.

The Intrinsic Charge Carrier Behaviors and Applications of Polyoxometalate Clusters Based Materials

Polyoxometalates (POMs) are a series of molecular metal oxide clusters, which span the two domains of solutes and solid metal oxides. The unique characters of POMs in structure, geometry, and adjustable redox properties have attracted widespread attention in functional material synthesis, catalysis, electronic devices, and electrochemical energy storage and conversion. This review is focused on the links between the intrinsic charge carrier behaviors of POMs from a chemistry-oriented view and their recent ground-breaking developments in related areas. First, the advantageous charge transfer behaviors of POMs in molecular-level electronic devices are summarized. Solar-driven, thermal-driven, and electrochemical-driven charge carrier behaviors of POMs in energy generation, conversion and storage systems are also discussed. Finally, present challenges and fundamental insights are discussed as to the advanced design of functional systems based upon POM building blocks for their possible emerging application areas.

Molecular Transition Metal Oxide Electrocatalysts for the Reversible Carbon Dioxide-Carbon Monoxide Transformation

Carbon monoxide dehydrogenase (CODH) enzymes are active for the reversible CO oxidation-CO₂ reduction reaction and are of interest in the context of CO₂ abatement and carbon-neutral solar fuels. Bioinspired by the active-site composition of the CODHs, polyoxometalates triply substituted with first-row transition metals were modularly synthesized. The polyanions, in short, {SiM₃ W₉ } and {SiM'₂ M''W₉ }, M, M', M''=Cu^II , Ni^II , Fe^III are shown to be electrocatalysts for reversible CO oxidation-CO₂ reduction. A catalytic Tafel plot showed that {SiCu₃ W₉ } was the most reactive for CO₂ reduction, and electrolysis reactions yielded significant amounts of CO with 98 % faradaic efficiency. In contrast, Fe-Ni compounds such as {SiFeNi₂ W₉ } preferably catalyzed the oxidation of CO to CO₂ similar to what is observed for the [NiFe]-CODH enzyme. Compositional control of the heterometal complexes, now and in the future, leads to control of reactivity and selectivity for CO₂ electrocatalytic reduction.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Porphyrins and Polyoxometalate Scaffolds

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.

Photoelectrochemical Reduction of Carbon Dioxide with a Copper Graphitic Carbon Nitride Photocathode

Research on the photoreduction of CO₂ often has been dominated by the use of sacrificial reducing agents. A pathway that avoids this problem would be the development of photocathodes for CO₂ reduction that could then be coupled to a photoanodic oxygen evolution reaction. Here, we present the use of copper-substituted graphitic carbon nitride (Cu-CN) on a fluorinated tin oxide (FTO) electrode for the photoelectrochemical two-electron reduction of CO₂ to CO as a major product (>95 %) and formic acid (<5 %). The results show that at a potential of -2.5 V versus Fc\Fc⁺ the CO₂ reduction activity of Cu-CN on FTO electrode improves by 25 % upon illumination by visible light with a faradaic efficiency of nearly 100 %. Independently, X-ray photoelectron spectroscopy conclusively shows a pronounced increase in the electrical conductivity of the Cu-CN upon white light illumination under vacuum and a contactless measuring configuration. This photo-assisted charge mobility is shown to play a key role in the increased reactivity and faradaic efficiency for the reduction of CO₂ .

Organic Moiety-Regulated Photocatalytic Performance of Phosphomolybdate Hybrids for Hexavalent Chromium Reduction

Visible-light-driven photocatalytic Cr(VI) reduction is a promising pathway to moderate environmental pollution, in which the development of photocatalysts is pivotal. Herein, three hourglass-type phosphomolybdate-based hybrids with the formula of: (H₂ bpe)₃ [Zn(H₂ PO₄ )][Zn(bpe)(H₂ O)₂ ]H{Zn[P₄ Mo₆ O₃₁ H₆ ]₂ } ⋅ 6H₂ O (1) Na₆ [H₂ bz]₂ [ZnNa₄ (H₂ O)₅ ]{Zn [P₄ Mo₆ O₃₁ H₃ ]₂ } ⋅ 2H₂ O (2) and (H₂ mbpy) {[Zn(mbpy)(H₂ O)]₂ [Zn(H₂ O)]₂ }{Zn[P₄ Mo₆ O₃₁ H₆ ]₂ } ⋅ 10H₂ O (3) (bpe=trans-1,2-bi(4-pyridyl)-ethylene; bz=4,4'-diaminobiphenyl; mbpy=4,4'-dimethyl-2,2'bipyridine) were synthesized under the guidance of the functional organic moiety modification strategy. Structural analysis showed that hybrids 1-3 have similar 2D layer-like spatial arrangements constructed by {Zn[P₄ Mo₆ ]₂ } clusters and organic components with different conjugated degree. With excellent redox properties and wide visible-light absorption capacities, hybrids 1-3 display favourable photocatalytic activity for Cr(VI) reduction with 79%, 70% and 64% reduction rates, which are superior to that of only inorganic {Zn[P₄ Mo₆ ]₂ } itself (21%). The investigation of organic components on photocatalytic performance of hybrids 1-3 suggested that the organic counter cations (bpe, bz and mbpy) can effectively affect the visible-light absorption, as well as the recombination of photogenerated carriers stemmed from {Zn[P₄ Mo₆ ]₂ } clusters, further promoting their photocatalytic performances towards Cr(VI) reduction. This work provides an experimental basis for the design of functionalized photocatalysts via the modification of organic species.

The Surface Chemistry of Metal Oxide Clusters: From Metal-Organic Frameworks to Minerals

Many metal-organic frameworks (MOFs) incorporate nodes that are small metal oxide clusters. Some of these MOFs are stable at high temperatures, offering good prospects as catalysts-prospects that focus attention on their defect sites and reactivities-all part of a broader subject: the surface chemistry of metal oxide clusters, illustrated here for MOF nodes and for polyoxocations and polyoxoanions. Ligands on MOF defect sites form during synthesis and are central to the understanding and control of MOF reactivity. Reactions of alcohols are illustrative probes of Zr₆O₈ node defects in UiO-66, characterized by the interconversions of formate, methoxy, hydroxy, and linker carboxylate ligands and by catalysis of alcohol dehydration reactions. We posit that new reactivities of MOF nodes will emerge from incorporation of a wide range of groups on their surfaces and from targeted substitutions of metals within them.

Co-immobilization of a Rh Catalyst and a Keggin Polyoxometalate in the UiO-67 Zr-Based Metal-Organic Framework: In Depth Structural Characterization and Photocatalytic Properties for CO2 Reduction

The Keggin-type polyoxometalate (POM) PW₁₂O₄₀^3- and the catalytic complex Cp*Rh(bpydc)Cl₂ (bpydc = 2,2'-bipyridine-5,5'-dicarboxylic acid) were coimmobilized in the Zr(IV) based metal organic framework UiO-67. The POM is encapsulated within the cavities of the MOF by in situ synthesis, and then, the Rh catalytic complex is introduced by postsynthetic linker exchange. Infrared and Raman spectroscopies, ³¹P and ¹³C MAS NMR, N₂ adsorption isotherms, and X-ray diffraction indicate the structural integrity of all components (POM, Rh-complex and MOF) within the composite of interest (PW₁₂,Cp*Rh)@UiO-67. DFT calculations identified two possible locations of the POM in the octahedral cavities of the MOF: one at the center of a UiO-67 pore with the Cp*Rh complex pointing toward an empty pore and one off-centered with the Cp*Rh pointing toward the POM. ³¹P-¹H heteronuclear (HETCOR) experiments ascertained the two environments of the POM, equally distributed, with the POM in interaction either with the Cp* fragment or with the organic linker. In addition, Pair Distribution Function (PDF) data were collected on the POM@MOF composite and provided key evidence of the structural integrity of the POM once immobilized into the MOF. The photocatalytic activity of the (PW₁₂,Cp*Rh)@UiO-67 composite for CO₂ reduction into formate and hydrogen were evaluated. The formate production was doubled when compared with that observed with the POM-free Cp*Rh@UiO-67 catalyst and reached TONs as high as 175 when prepared as thin films, showing the beneficial influence of the POM. Finally, the stability of the composite was assessed by means of recyclability tests. The combination of XRD, IR, ICP, and PDF experiments was essential in confirming the integrity of the POM, the catalyst, and the MOF after catalysis.

Recent advances of polyoxometalates in multi-functional imaging and photothermal therapy

The recent advances of polyoxometalate clusters in terms of near infrared photothermal properties for targeted tumor therapy have been summarized while the combined applications with various bio-imaging techniques and chemotherapies are reviewed.

Excited-State Triplet Equilibria in a Series of Re(I)-Naphthalimide Bichromophores

We present the synthesis, structural characterization, electronic structure calculations, and the ultrafast and supra-nanosecond photophysical properties of a series of five bichromophores of the general structural formula [Re(5-R-phen)(CO)₃(dmap)](PF₆), where R is a naphthalimide (NI), phen = 1,10-phenanthroline, and dmap is 4-dimethylaminopyridine. The NI chromophores were systematically modified at their 4-positions with -H (NI), -Br (BrNI), phenoxy (PONI), thiobenzene (PSNI), and piperidine (PNI), rendering a series of metal-organic bichromophores (Re1-Re5, respectively) featuring variability in the singlet and triplet energies in the pendant NI subunit. Five closely related organic chromophores as well as [Re(phen)(CO)₃(dmap)](PF₆) (Re6) were investigated in parallel to appropriately model the photophysical properties exhibited in the bichromophores. The excited state processes of all molecules in this study were elucidated using a combination of transient absorption spectroscopy and time-resolved photoluminescence (PL) spectroscopy, revealing the kinetics of the energy transfer processes occurring between the appended chromophores. The spectroscopic analysis was further supported by electronic structure calculations which identified the origin of many of the experimentally observed electronic transitions.

ON/OFF Photostimulation of Isatin Bipyridyl Hydrazones: Photochemical and Spectral Study

Four novel isatin hydrazones containing bipyridyl fragments were synthesized as potential ON/OFF switches. Hydrazone Z-isomers exhibit high thermal stability. The characteristic photochemical reaction for all studied hydrazones is the Z–E isomerization in CHCl₃. After irradiation of hydrazones 1 and 2 in dimethylformamide (DMF), the photoreaction products are tautomers. When using light with the appropriate wavelength, the photo-tautomerization reaction is reversible. In these conditions, studied hydrazones have ON/OFF switch properties. In the case of hydrazones 1 and 2, by alternating heat and light stimulation it is possible to control the isomerization process reversibly. In the presence of fluoride ions, NH hydrogen from the studied hydrazones is cleaved, and the corresponding anions are formed. The resulting anions of Z-isomers are changed to the corresponding E-isomer at room temperature.

Polyoxometalate-Based Catalysts for CO2 Conversion

Polyoxometalates (POMs) are a diverse class of anionic metal-oxo clusters with intriguing chemical and physical properties. Owing to unrivaled versatility and structural variation, POMs have been extensively utilized for catalysis for a plethora of reactions. In this focused review, the applications of POMs as promising catalysts or co-catalysts for CO₂ conversion, including CO₂ photo/electro reduction and CO₂ as a carbonyl source for the carbonylation process are summarized. A brief perspective on the potentiality in this field is proposed.

Hetero-metallic active sites coupled with strongly reductive polyoxometalate for selective photocatalytic CO2-to-CH4 conversion in water

The photocatalytic reduction of CO2 to value-added methane (CH4) has been a promising strategy for sustainable energy development, but it is challenging to trigger this reaction because of its necessary eight-electron transfer process. In this work, an efficient photocatalytic CO2-to-CH4 reduction reaction was achieved for the first time in aqueous solution by using two crystalline heterogeneous catalysts, H{[Na2K4Mn4(PO4) (H2O)4]⊂{[Mo6O12(OH)3(HPO4)3(PO4)]4[Mn6(H2O)4]}·16H2O (NENU-605) and H{[Na6CoMn3(PO4)(H2O)4]⊂{[Mo6O12(OH)3(HPO4)3(PO4)]4[Co1.5Mn4.5]}·21H2O (NENU-606). Both compounds have similar host inorganic polyoxometalate (POM) structures constructed with strong reductive {P4Mo6 V} units, homo/hetero transition metal ions (MnII/CoIIMnII) and alkali metal ions (K+ and/or Na+). It is noted that the {P4Mo6 V} cluster including the six MoV atoms served as a multi-electron donor in the case of a photocatalytic reaction, while the transition metal ions functioned as catalytically active sites for adsorbing and activating CO2 molecules. Additionally, the presence of alkali metal ions was believed to assist in the capture of more CO2 for the photocatalytic reaction. The synergistic combination of the above-mentioned components in NENU-605 and NENU-606 effectively facilitates the accomplishment of the required eight-electron transfer process for CH4 evolution. Furthermore, NENU-606 containing hetero-metallic active sites finally exhibited higher CH4 generation selectivity (85.5%) than NENU-605 (76.6%).

MoIV3-Polyoxomolybdates with frustrated Lewis pairs for high-performance hydrogenation catalysis

Highly efficient catalytic hydrogenation of the MOIV6-γ-Keggin hybrid with Mo^IV–O–Mo^VIO multiple Lewis pairs has been established.

Photochemical and electrochemical hydrogen evolution reactivity of lanthanide-functionalized polyoxotungstates

The first example of hydrogen evolution reactivity (HER) of lanthanide-functionalized Keggin-based polyoxotungstates under photochemical and electrochemical conditions is reported. The HER activity under homogeneous, visible light-driven conditions and under heterogeneous, electrochemical conditions depends on the type of lanthanide functionalization, so that a new class of model HER catalysts for systematic reactivity studies is now accessible.

Polyoxometalate-Based Metal-Organic Frameworks for Selective Oxidation of Aryl Alkenes to Aldehydes

Polyoxometalates (POMs) show considerable catalytic performance toward the selective oxidation of alkenes to aldehydes, which is commercially valuable for the production of pharmaceuticals, dyes, perfumes, and fine chemicals. However, the low specific surface area of POMs as heterogeneous catalysts and poor recyclability as homogeneous catalysts have hindered their wide application. Dispersing POMs into metal-organic frameworks (MOFs) for the construction of POM-based MOFs (POMOFs) suggests a promising strategy to realize the homogeneity of heterogeneous catalysis. Herein, we report two new POMOFs with chemical formulas of [Co(BBTZ)₂][H₃BW₁₂O₄₀]·10H₂O (1) and [Co₃(H₂O)₆(BBTZ)₄][BW₁₂O₄₀]·NO₃·4H₂O (2) (BBTZ = 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene) for the selective oxidation of alkenes to aldehydes. Compound 1 possesses a non-interpenetrated three-dimensional (3D) cds-type open framework with a 3D channel system. Compound 2 displays a 3D polyrotaxane framework with one-dimensional channels along the [100] direction. In the selective oxidation of styrene into benzaldehyde, compound 1 can achieve a 100% conversion in 4 h with 96% selectivity toward benzaldehyde, which is superior to that of compound 2. A series of control experiments reveal that the co-role of [BW₁₂O₄₀]^5- and Co²⁺ active center as well as a more open framework feature co-promote the catalytic property of the POMOFs in this case. This work may suggest a new option for the development of POMOF catalysts in the selective oxidation of alkenes.

Covalent hybrids based on Re(i) tricarbonyl complexes and polypyridine-functionalized polyoxometalate: synthesis, characterization and electronic properties

A series of [Re(CO)₃Br(N^N)] (N^N = substituted 2,2'-bipyridine ligand) complexes based on polypyridine-functionalized Dawson polyoxometalate (1-3) has been synthesized. The new hybrids (4-6) were characterized by various analytical techniques, including absorption, vibrational and luminescence spectroscopies as well as electrochemistry. Both units, the polyoxometalate and the transition metal complex, retain their intrinsic properties. Their combination in the newly prepared hybrids results in improved photosensitization in the high-energy visible region. However, a complete quenching of the emission for the [Re(CO)₃Br(N^N)] complexes is observed due to formation of a charge separated state, Re(ii) - POM^-, as shown by quenching experiments as well as theoretical modelling via DFT.

Re(CO)3-Templated Synthesis of α-Amidinoazadi(benzopyrro)methenes

α-Amidinoazadi(benzopyrro)methenes were synthesized using the Re(CO)₃ unit as a templating agent. The products of these template reactions are six-coordinate rhenium complexes, with a facial arrangement of carbonyls, a noncoordinating anion, and a tridentate α-amidinoazadi(benzopyrro)methene ligand. The tridentate ligand shows the conversion of one diiminoisoindoline sp² carbon to a sp³ carbon, which has been seen in the "helmet" and bicyclic phthalocyanines. The bidentate diiminoisoindoline fragment tilts out of the plane of coordination. Five examples of α-amidinoazadi(benzopyrro)methenes produced from these reactions using different nitrile solvents, including the nitrile activation of acetonitrile, propionitrile, butyronitrile, cyclohexanecarbonitrile, and benzonitrile.

Photoinduced electron transfer from rylenediimide radical anions and dianions to Re(bpy)(CO)3 using red and near-infrared light

A major goal of artificial photosynthesis research is photosensitizing highly reducing metal centers using as much as possible of the solar spectrum reaching Earth's surface. The radical anions and dianions of rylenediimide (RDI) dyes, which absorb at wavelengths as long as 950 nm, are powerful photoreductants with excited state oxidation potentials that rival or exceed those of organometallic chromophores. These dyes have been previously incorporated into all-organic donor-acceptor systems, but have not yet been shown to reduce organometallic centers. This study describes a set of dyads in which perylenediimide (PDI) or naphthalenediimide (NDI) chromophores are attached to Re(bpy)(CO)₃ through either the bipyridine ligand or more directly to the Re center via a pyridine ligand. The chromophores are reduced with a mild reducing agent, after which excitation with long-wavelength red or near-infrared light leads to reduction of the Re complex. The kinetics of electron transfer from the photoexcited anions to the Re complex are monitored using transient visible/near-IR and mid-IR spectroscopy, complemented by theoretical spectroscopic assignments. The photo-driven charge shift from the reduced PDI or NDI to the complex occurs in picoseconds regardless of whether PDI or NDI is attached to the bipyridine or to the Re center, but back electron transfer is found to be three orders of magnitude slower with the chromophore attached to the Re center. These results will inform the design of future catalytic systems that incorporate RDI anions as chromophores.

Synthesis and photo-/electro-catalytic properties of Keggin polyoxometalate inorganic–organic hybrid layers based on d10 metal and rigid benzo-diazole/-triazole ligands

Unusual hepta- and nona-nuclear copper/silver complexes were introduced into different Keggin cluster leading to 2-D hybrid layers, which exhibit merit photo- and electro-catalytic properties.