Seedless Synthesis of Monodispersed Gold Nanorods with Remarkably High Yield: Synergistic Effect of Template Modification and Growth Kinetics Regulation

Synthesis and degradation mechanism of renally excretable gold core-shell nanoparticles for combined photothermal and photodynamic therapy

Photothermal therapy (PTT) has emerged as a very potent therapeutic approach in the treatment of tumors. Gold nanoparticles have gained considerable scientific interest as a photosensitizer due to their absorbance in the near-infrared regions. However, their biodegradation and excretion from the body is a challenge. Various biodegradable systems consisting of liposomes and polymers have been synthesized, but their precise manufacturing and decomposition mechanisms have not yet been explored. Using zein nanoparticles as a template, we have fabricated a glutathione-functionalized gold core shell type of formulation. The scalability of the one-step seedless gold coating process is also reported. The synthesis procedure of these tunable nanoparticles is understood with TEM. The thermal degradation of the material under the physiological conditions is thoroughly examined using UV and TEM. In vitro PTT effectiveness on breast cancer cells is assessed after an extensive in vitro toxicity research. The mechanism of cell death is studied using ROS and cell cycle analysis. The material exhibited good efficacy as a PTT agent in mice and showed non-toxicity up to 14 days. The renal clearance study of the material in mice shows its disintegration into renal clearable minute gold seeds. All the findings suggest biodegradable glutathione-functionalized gold core-shell nanoparticles as potential photothermal cancer treatment agents.

SPR detection of protein enhanced by seedless synthesized gold nanorods

Surface plasmon resonance (SPR) is a label-free, real-time bio-sensing technique with high potential in the diagnostic area, especially when a signal amplification strategy is used to improve the detection limit. We report here a simple method for enhancing the detection limit of bovine serum albumin (BSA), by attaching gold nanorods (AuNRs). AuNRs were obtained by a seedless synthesis technique and characterized using scanning electron microscopy (SEM), UV-VIS spectroscopy, FT-IR spectroscopy and dynamic light scattering (DLS). Finite element method (FEM) simulations were employed to explore the enhancement of the SPR signal by adding AuNRs on the SPR sensor's metallic layer. SPR spectroscopy was used to analyze the changes in the refractive index brought by the immobilization of unconjugated BSA and BSA modified with AuNRs. The results confirmed that the AuNRs conjugated with the protein increase the SPR signal ~ 10 times, leading to a limit of detection of 1.081 × 10^-8 M (0.713 μg/mL).

Comparative study of an antimicrobial peptide and a neuropeptide conjugated with gold nanorods for the targeted photothermal killing of bacteria

There are certain disadvantages in treating bacterial infections through conventional methods. For this reason, the current study does focus on combating bacterial wound infections by photothermal therapy assisted by gold nanorod-peptide conjugates (GNR-peptide conjugates). Two peptides, the cationic antimicrobial peptide LL-37 and neuropeptide ANGIOPEP-2 both with specificity for targeted bacterial binding, were conjugated with GNR surface through electrostatic interactions. The GNR-peptide conjugates showed good biocompatibility, sufficient stability, enhanced targeting, potential photothermal killing of bacteria, and possible acceleration of wound healing. The photo-biomodulation properties of NIR improved the wound closure rates through enhanced cell migration. The multifunctional LL37-conjugated GNRs significantly enhanced photothermal therapeutic outcomes based on bacterial targeting with promising wound healing properties.

Improvement of Gold Nanorods in Photothermal Therapy: Recent Progress and Perspective

Cancer is a life-threatening disease, and there is a significant need for novel technologies to treat cancer with an effective outcome and low toxicity. Photothermal therapy (PTT) is a noninvasive therapeutic tool that transports nanomaterials into tumors, absorbing light energy and converting it into heat, thus killing tumor cells. Gold nanorods (GNRs) have attracted widespread attention in recent years due to their unique optical and electronic properties and potential applications in biological imaging, molecular detection, and drug delivery, especially in the PTT of cancer and other diseases. This review summarizes the recent progress in the synthesis methods and surface functionalization of GNRs for PTT. The current major synthetic methods of GNRs and recently improved measures to reduce toxicity, increase yield, and control particle size and shape are first introduced, followed by various surface functionalization approaches to construct a controlled drug release system, increase cell uptake, and improve pharmacokinetics and tumor-targeting effect, thus enhancing the photothermal effect of killing the tumor. Finally, a brief outlook for the future development of GNRs modification and functionalization in PTT is proposed.

Rapid and Green Preparation of Multi-Branched Gold Nanoparticles Using Surfactant-Free, Combined Ultrasound-Assisted Method

The conventional seed-mediated preparation of multi-branched gold nanoparticles uses either cetyltrimethylammonium bromide or sodium dodecyl sulfate. However, both surfactants are toxic to cells so they have to be removed before the multi-branched gold nanoparticles can be used in biomedical applications. This study describes a green and facile method for the preparation of multi-branched gold nanoparticles using hydroquinone as a reducing agent and chitosan as a stabilizer, through ultrasound irradiation to improve the multi-branched shape and stability. The influence of pH, mass concentration of chitosan, hydroquinone concentration, as well as sonication conditions such as amplitude and time of US on the growth of multi-branched gold nanoparticles, were also investigated. The spectra showed a broad band from 500 to over 1100 nm, an indication of the effects of both aggregation and contribution of multi-branches to the surface plasmon resonance signal. Transmission electron microscopy measurements of GNS under optimum conditions showed an average core diameter of 64.85 ± 6.79 nm and 76.11 ± 14.23 nm of the branches of multi-branched particles. Fourier Transfer Infrared Spectroscopy was employed to characterize the interaction between colloidal gold nanoparticles and chitosan, and the results showed the presence of the latter on the surface of the GNS. The cytotoxicity of chitosan capped GNS was tested on normal rat fibroblast NIH/3T3 and normal human fibroblast BJ-5ta using MTT assay concentrations from 50–125 µg/mL, with no adverse effect on cell viability.

Synthesis of Au nanorods via autocatalytic growth of Au seeds formed by sonochemical reduction of Au(I): Relation between formation rate and characteristic of Au nanorods

The sonochemical formation of Au seeds and their autocatalytic growth to Au nanorods were investigated in a one-pot as a function of concentration of HAuCl₄, AgNO₃, and ascorbic acid (AA). The effects of ultrasonic power and irradiation time were also investigated. In addition, the formation rate of Au nanorods was analyzed by monitoring the extinction at 400 nm by UV-Vis spectroscopy and compared with the growth behavior of Au seeds to nanorods. Most of the reaction conditions affected the yield, size, and shape of Au nanorods formed. It was confirmed that the concentration balance between HAuCl₄ and AA was important to proceed the formation of Au seeds and nanorods effectively. The formation rate became faster with increasing AA concentration and dog-bone shaped nanorods were formed at high AA concentration. It was also confirmed a unique phenomenon that the shape of Au nanorods changed even after the completion of the reduction of Au(I) in the case of short-time ultrasonic irradiation for Au seed formation.

Preparation of gold nanorod-incorporated monolith for solid phase extraction of polycyclic aromatic hydrocarbons

An organic-inorganic hybrid monolithic column doped with gold nanorods (AuNRs) was prepared and evaluated for solid phase extraction (SPE) of polycyclic aromatic hydrocarbons (PAHs). Excellent dispersibility of AuNRs in binary green porogen system consisting of 1-hexyl-3-methylimidazolium tetrafluoroborate and deep eutectic solvents (DESs) was confirmed by energy dispersive spectrometry (EDS). The particle size of the resulting AuNRs (70-90 nm) was thoroughly examined by a transmission electron microscopy (TEM). The redox system including ammonium persulfate (APS) and tetramethylethylenediamine (TEMED) was used to initiate in situ polymerization at 4 °C to prepare the hybrid monolith. The mesoporous structure of the AuNR hybrid monoliths was confirmed by scanning electron microscopy (SEM) and nitrogen adsorption. With enrichment factors (EFs) of 150- to 292-fold, the developed method was successfully applied to the determination of 10 PAHs in wastewater samples. The recoveries at a spiked level were in the range 84.9 to 99.5% with limit of detections (LODs) and relative standard deviations (RSDs) ranging from 0.02 to 0.10 μg L^-1 and 1.5 to 4.2%, respectively. The correlation coefficients (R²) for the calibration function obtained were better 0.9991 for the target compounds. Compared to the AuNR-free monolith, the extraction efficiency of the AuNR-incorporated monolith is more than two times higher. The results indicated that the doping of AuNRs is an effective approach to obtain the hybrid monolithic column with good separation ability for PAHs. Graphical abstract.

Gold nanorods: from anisotropy to opportunity. An evolution update

Gold nanoparticles have drawn attention to nanomedicine for many years due to their physicochemical properties, which include: good stability; biocompatibility; easy surface chemistry and superior magnetic; and last, electronic properties. All of these properties distinguish gold nanoparticles as advantageous carriers to be exploited. The challenge to develop new gold nanostructures has led to anisotropy, a new property to exploit for various medical applications: diagnostic and imaging strategies as well as therapeutic options. Gold nanorods are the most studied anisotropic gold nanoparticles because of the presence of two absorption peaks according to their longitudinal and transversal plasmon resonances. The longitudinal surface plasmonic resonance can provide the absorption in the near-infrared region and this is an important aspect of using gold nanorods for medical purposes.

Anisotropic Gold Nanoparticles in Biomedical Applications

Gold nanoparticles (AuNPs) play a crucial role in the development of nanomedicine, principally due to their unique photophysical properties and high biocompatibility. The possibility to tune and customize the localized surface plasmon resonance (LSPR) toward near-infrared region by modulating the AuNP shape is one of the reasons for the huge widespread use of AuNPs. The controlled synthesis of no-symmetrical nanoparticles, named anisotropic, is an exciting goal achieved by the scientific community which explains the exponential increase of the number of publications related to the synthesis and use of such type of AuNPs. Even with such steps forward and the AuNP translation in clinic being done, some key issues are still remain and they are related to a reliable and scalable production, a full characterization, and to the development of nanotoxicology studies on the long run. In this review we highlight the very recent advances on the synthesis of the main classes of anisotropic AuNPs (nanorods, nanourchins and nanocages) and their use in the biomedical fields, in terms of diagnosis and therapeutics.

Accelerating Gold Nanorod Synthesis with Nanomolar Concentrations of Poly(vinylpyrrolidone)

A novel modification for the seedless synthesis of gold nanorods (AuNRs) has been developed. Nanomolar concentrations of 10 kDa poly(vinylpyrrolidone) (PVP) can be introduced to a growth solution containing 25, 50, or 100 mM cetyltrimethylammonium bromide (CTAB) to significantly reduce the dimensions of AuNRs. We found that PVP accelerates the growth rate of AuNRs by more than two times that of nanorods grown in 50 and 100 mM CTAB solutions. Additionally, there is a time-dependent effect of adding PVP to the nanorod growth solution that can be utilized to tune their aspect ratio. Because the concentration of PVP is far below the concentration of HAuCl₄ in the reaction mixture, PVP primarily functions not as a reducing agent, but as a capping or templating ligand to stabilize the growing nanorods. Our reproducible protocol enables the synthesis of AuNRs in high yield with tunable sizes: 45 × 6.7, 28 × 5.5, and 12 × 4.5 nm for 100, 50, and 25 mM CTAB, respectively. We estimated the number of PVP chains per nanorod in growth solutions to be around 30, which suggests that the effect on the aspect ratio is caused by a direct interaction between the AuNR surface and the PVP.