Defective Metal-Organic Frameworks Incorporating Iridium-Based Metalloligands: Sorption and Dye Degradation Properties

Synthetic and analytical considerations for the preparation of amorphous metal-organic frameworks

Metal-organic frameworks (MOFs) are hybrid porous materials presenting several tuneable properties, allowing them to be utilised for a wide range of applications. To date, focus has been on the preparation of novel crystalline MOFs for specific applications. Recently, interest in amorphous MOFs (aMOFs), defined by their lack of correlated long-range order, is growing. This is due to their potential favourable properties compared to their crystalline equivalents, including increased defect concentration, improved processability and gas separation ability. Direct synthesis of these disordered materials presents an alternative method of preparation to post-synthetic amorphisation of a crystalline framework, potentially allowing for the preparation of aMOFs with varying compositions and structures, and very different properties to crystalline MOFs. This perspective summarises current literature on directly synthesised aMOFs, and proposes methods that could be utilised to modify existing syntheses for crystalline MOFs to form their amorphous counterparts. It outlines parameters that could discourage the ordering of crystalline MOFs, before examining the potential properties that could emerge. Methodologies of structural characterisation are discussed, in addition to the necessary analyses required to define a topologically amorphous structure.

A review of metal-organic framework (MOF) materials as an effective photocatalyst for degradation of organic pollutants

Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.

Tailoring the Nanoporosity and Photoactivity of Metal-Organic Frameworks With Rigid Dye Modulators for Toluene Purification

Facile synthesis of hierarchically porous metal-organic frameworks (MOFs) with adjustable porosity and high crystallinity attracts great attention yet remains challenging. Herein, a micromolar amount of dye-based modulator (Rhodamine B (RhB)) is employed to easily and controllably tailor the pore size of a Ti-based metal-organic framework (MIL-125-NH2 ). The RhB used in this method is easily removed by washing or photodegradation, avoiding secondary posttreatment. It is demonstrated that the carboxyl functional group and the steric effects of RhB are indispensable for enlarging the pore size of the MIL-125-NH2 . The resulting hierarchically porous MIL-125-NH2 (RH-MIL-125-NH2 ) exhibits optimized adsorption and photocatalytic activity because the newly formed mesopore with defects concurrently facilitates mass transport of guest molecules (toluene) and photogenerated charge separation. This work offers a meaningful basis for the construction of hierarchically porous MOFs and demonstrates the superiority of the hierarchical pore structure for adsorption and heterogeneous catalysis.

Dangling bond formation on COF nanosheets for enhancing sensing performances

Dangling bond formation for COF materials in a rational manner is an enormous challenge, especially through post-treatment which is a facile strategy while has not been reported yet. In this work, a "chemical scissor" strategy is proposed for the first time to rationally design dangling bonds in COF materials. It is found that Zn²⁺ coordination in post-metallization of TDCOF can act as an "inducer" which elongates the target bond and facilitates its fracture in hydrolyzation reactions to create dangling bonds. The number of dangling bonds is well-modulated by controlling the post-metallization time. Zn-TDCOF-12 shows one of the highest sensitivities to NO₂ in all reported chemiresistive gas sensing materials operating under visible light and room temperature. This work opens an avenue to rationally design a dangling bond in COF materials, which could increase the active sites and improve the mass transport in COFs to remarkably promote their various chemical applications.

Tailoring the π-system of benzimidazole ligands towards stable light-harvesting cyclometalated iridium(III) complexes

The synthesis, structure, optical and redox properties as well as photovoltaic studies of iridium(III) complexes with cyclometalated 2-arylbenzimidazoles decorated with various polyaromatic fragments and an ancillary aromatic β-diketone are reported. Despite the strong preference of the iridium(III) ion to form bis- or tris-cyclometalated complexes in which the metal participates in five-membered metallacycles, the cyclometalation of the benzimidazole ligands containing rigid π-extended systems yields dimeric complexes containing strained five- or six-membered metallacycles and allows for generating an extremely rare monocyclometalated complex. X-ray crystallography shows that the steric strain observed in the dimers is retained in heteroleptic diketonate complexes which is also corroborated by gas-phase DFT calculations. While emission maxima and redox potentials of the heteroleptic complexes exhibit just a moderate variation upon the change of the cyclometalated ligands, the extension of the π-system of the benzimidazole ligands give the complexes remarkable light absorption in the visible spectral range, which meets the requirements for application in dye-sensitized solar cells. At the titania photoanodes, these iridium dyes retain their optical properties and exhibit power conversion efficiencies under standard AM 1.5 G conditions comparable to those of other iridium-based sensitizers. These results demonstrate that the size and position of the π-extended fragment in cyclometalated ligands can modulate not only the electronic structure of the corresponding iridium(III) complexes, but also affect their composition, structure and reactivity that may find implications in future design of emerging iridium dyes, emitters and catalysts.

Regulating defective sites for pharmaceuticals selective removal: Structure-dependent adsorption over continuously tunable pores

Developing efficient adsorbents with proper pore size for pharmaceutical removal is challenging. Water stable metal-organic frameworks (MOFs) are crystalline materials within the three-dimensional frameworks, which have already aroused increasing attention for their potential advantages with high surface area and abundant channels. However, whether or not the existing ones are performing their full capacities needs to be seriously considered. Herein, we precisely designed a series of fine-tuning hierarchically porous materials based on the water-stable Zr-based MOFs. The adsorption capacity and uptake rate of as-synthesized materials for pharmaceuticals are significantly improved. Fifteen isostructural frameworks with increasing finely tuned pore structures were successfully constructed with seven monocarboxylic modulators of increasing alkyl chain lengths. A strong correlated relationship between the mesoporous proportion and trapping kinetics can be found. Adsorption performance of 17 pharmaceuticals with various typical categories has been systematically studied over these as-synthesized materials. Competitors in natural wastewater were studied systematically. The competitive adsorption can selectively trap the target compounds in HA (humic acid), BSA (bovine serum albumin), and BHB (bovine hemoglobin) by an efficient size exclusion effect. Thus, this study offers helpful guidance for MOF modification to enhance the removal of micropollutants in natural wastewater and a fundamental understanding of the porosity-performance relationships.

Switching from Oxygen Quenching Resistance to Linear Response by Smart Luminescent Iridium(III)-Based Metal-Organic Frameworks

In this study, we utilize a photo-active Ir-metalloligand, Ir(C^N)₂(L) (C^N = 2-(2,4-difluorophenyl) pyridine, L = [2,2'-bipyridine]-5,5'-dicarboxylic acid), to assemble with CdX₂ under hydrothermal conditions, yielding highly emissive crystals of two-dimensional metal-organic frameworks (2D MOFs) (named Ir-Cd₂X_2, X = Cl, Br). The Ir-Cd₂X₂ MOFs exhibit μs-level phosphorescence lifetimes and more than 55% quantum yield (QY) at room temperature because of the rigid framework connected by Cd₂X₂ clusters. By immersing Ir-Cd₂X₂ in water solution for 5 min, a new MOF (Ir-Cd) was obtained, which is given a structure with hydrolyzed Cd-nodes by complete removal of halogen bridges as elucidated by single-crystal diffraction. Although the phosphorescence emission of pristine CdX₂ MOFs exhibits oxygen quenching resistance, the converted Ir-Cd MOF possesses sensitively oxygen-responsive ³MLCT properties, showing a K_SV value as high as 14.5 with strictly linear relation (R² = 0.995). This work differs from the traditional method for improving oxygen-sensing metrics by enhancing QY and phosphorescence lifetime in Ir complexes, while also demonstrating that the transformation in the surrounding coordination environment on adjacent metal centers can also constitute key factors for improved photoluminescence stability or responsive properties in Ir-based heteronuclear MOFs, providing clues for the development of either oxygen quenching blockers or sensors suitable for different occasions.

A comprehensive review on water remediation using UiO-66 MOFs and their derivatives

Metal-organic frameworks (MOFs) are a versatile class of porous materials offering unprecedented scope for chemical and structural tunability. On account of their synthetic versatility, tunable and exceptional host-guest chemistry they are widely utilized in many prominent water remediation techniques. However, some of the MOFs present low structural stabilities specifically in aqueous and harsh chemical conditions which impedes their potential application in the field. Among the currently explored MOFs, UiO-66 exhibits structural robustness and has gained immense scientific popularity. Built with a zirconium-terephthalate framework, the strong Zr-O bond coordination contributes to its stability in aqueous, chemical, and thermal conditions. Moreover, other exceptional features such as high surface area and uniform pore size add to the grand arena of porous nanomaterials. As a result of its stable nature, UiO-66 offers relaxed admittance towards various functionalization, including synthetic and post-synthetic modifications. Consequently, the adsorptive properties of these highly stable frameworks have been modulated by the addition of various functionalities. Moreover, due to the presence of catalytically active sites, the use of UiO-66 has also been extended towards the degradation of pollutants. Furthermore, to solve the practical handling issues of the crystalline powdered forms, UiO-66 has been incorporated into various membrane supports. The incorporation of UiO-66 in various matrices has enhanced the rejection, permeate flux, and anti-fouling properties of membranes. The combination of such exceptional characteristics of UiO-66 MOF has expanded its scope in targeted purification techniques. Subsequently, this review highlights the role of UiO-66 in major water purification techniques such as adsorption, photocatalytic degradation, and membrane separation. This comprehensive review is expected to shed light on the existing developments and guide the inexhaustible futuristic scope of UiO-66 MOF.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.

Defect Engineering in Metal‒Organic Frameworks as Futuristic Options for Purification of Pollutants in an Aqueous Environment

Clean water scarcity is becoming an increasingly important worldwide issue. The water treatment industry is demanding the development of novel effective materials. Defect engineering in nanoparticles is among the most revolutionary of technologies. Because of their high surface area, structural diversity, and tailorable ability, Metal‒Organic Frameworks (MOFs) can be used for a variety of purposes including separation, storage, sensing, drug delivery, and many other issues. The application in wastewater treatment associated with water stable MOF‒based materials has been an emerging research topic in recent decades. Defect engineering is a sophisticated technique used to manufacture defects and to change the geometric framework of target compounds. Since MOFs have a series of designable structures and active sites, tailoring properties in MOFs by defect engineering is a novel concept. Defect engineering can excavate hidden active sites in MOFs, which can lead to better performance in many fields. Therefore, this technology will open new opportunities in water purification processes. However, there has been little effort to comprehensively discuss this topic. In this review, we provide an overview of the development of defect engineered MOFs for water purification processes. Furthermore, we discuss the potential applications of defect engineered materials.

Controlling the molecular diffusion in MOFs with the acidity of monocarboxylate modulators

The catalytic performance of metal-organic frameworks (MOFs) is related to their physicochemical properties, such as particle size, defect chemistry and porosity, which can be potentially controlled by coordination modulation. By combining PXRD, ¹HNMR, FT-IR, and N₂ uptake measurements we have gained insights into the control of different types of defects (missing linker or missing cluster consequence of the spatial distribution of missing linkers, and a combination of both) by the type of modulator employed. We show that the molar percent of defects, either as missing linkers or as a part of missing cluster defects, is related to the acidity of a modulator and its subsequent incorporation into the UiO-66 structure. Modulators with strong acidity and small size result in a considerable defect induction that causes an increase in the external surface area and mesopore volume, which is beneficial for the ring-opening of epoxides with amines, using UiO-66 defect-modulated MOFs as heterogeneous catalysts.

Synergistic effect of dual sites on bimetal-organic frameworks for highly efficient peroxide activation

Active site engineering is of significant importance for developing high activity metal-organic frameworks (MOFs) for catalytic applications. Herein, we develop a one-pot strategy to construct bimetal organic frameworks with Fe-Co dual sites for Fenton-like catalysis. Density functional theory (DFT) demonstrated that the introducing Co heteroatoms into MIL-101(Fe) (MIL represents Matérial Institute Lavoisier) was favorable for the formation of electron-deficient centers around benzene rings and electron-rich centers around Fe/Co. This synergistic effect could effectively decrease the energy barrier of H₂O₂ activation. Due to the facilitated charge transfer in the coordinated structures, MIL-101(Fe,Co) with engineered dual sites exhibited exceptionally high efficiency for the degradation of ciprofloxacin (CIP). The reaction rate of MIL-101(Fe,Co)/H₂O₂ system was 0.12 min^-1, which was nearly 7.5 times higher than that of pristine MIL-101(Fe). The reaction mechanism of heterogeneous Fenton-like catalysis was fundamentally investigated by series of in-situ techniques, such as DRIFTS and Raman. ·OH radicals generated by H₂O₂ activation endowed the inspiring ability of MIL-101(Fe,Co) for water decontamination. This work offers a facile principle of exploring MOFs-based Fenton-like catalysts with a wide working pH range for environmental applications.

Recent highlights and future prospects on mixed-metal MOFs as emerging supercapacitor candidates

Mixed-metal metal-organic frameworks (M-MOFs) consist of at least two different metal ions as nodes in the same framework. The incorporation of a second or more metal ions provides structural/compositional diversity, multi-functionality and stability to the framework. Moreover, the periodical array of different metal ions in the framework may alter the physical/chemical properties of M-MOFs and result in fascinating applications. M-MOFs with exciting structural features offer superior supercapacitor performances compared to single metal MOFs due to the synergic effect of different metal ions. In this review, we summarize several synthetic methods to construct M-MOFs by employing various organic ligands or metalloligands. Further, we discuss the electrochemical performance of several M-MOFs and their derived composite materials for supercapacitor applications.

A Mn(ii)–MOF with inherent missing metal-ion defects based on an imidazole-tetrazole tripodal ligand and its application in supercapacitors

A 3D Mn(ii)–MOF containing unexpected inherent missing metal-ion defects was constructed, and its application on a supercapacitor was studied.

Self-sacrificed construction of defect-rich ZnO@ZIF-8 nanocomposites with enhanced photocurrent properties

An in situ self-sacrificed template strategy was used to construct core–shell structured defective ZnO@ZIF-8 nanocomposites with enhanced photocurrent properties.

Five naphthalene-amide-bridged Ni(ii) complexes: electrochemistry, bifunctional fluorescence responses, removal of contaminants and optimization by CVD

Five multifunctional Ni-CPs based on a new naphthalene-amide and different carboxylates were obtained and exhibited various properties. CNTs were synthesized from the precursors of CPs, showing selective removal of contaminants in water.

Reticular Chemistry of Uranyl Phosphonates: Sterically Hindered Phosphonate Ligand Method is Significant for Constructing Zero-Dimensional Secondary Building Units

Designability is an attractive feature for metal-organic frameworks (MOFs) and essential for reticular chemistry, and many ideas are significantly useful in the carboxylate system. Bi-, tri-, and tetra-topic phosphonate ligands are used to achieve framework structures. However, an efficient method for designing phosphonate MOFs is still on the way, especially for uranyl phosphonates, owing to the complicated coordination modes of the phosphonate group. Uranyl phosphonates prefer layer or pillar-layered structures as the topology extension for uranyl units occurs in the plane perpendicular to the linear uranium-oxo bonds and phosphonate ligands favor the formation of compact structures. Therefore, an approach that can construct three-dimensional (3D) uranyl phosphonate MOFs is desired. In this paper, a sterically hindered phosphonate ligand method (SHPL) is described and is successfully used to achieve 3D framework structures of uranyl phosphonates. Four MOF compounds ([AMIM]₂ (UO₂ )(TppmH₄ )⋅H₂ O (UPF-101), [BMMIM]₂ (UO₂ )₃ (TppmH₄ )₂ ⋅H₂ O (UPF-102), [Py14]₂ (UO₂ )₃ (TppmH₄ )₂ ⋅3 H₂ O (UPF-103), and [BMIM](UO₂ )₃ (TppmH₃ )F₂ ⋅2 H₂ O (UPF-104); [AMIM]=1-allyl-3-methylimidazolium, [BMMIM]=1-butyl-2,3-dimethylimidazolium, [Py14]=N-butyl-N-methylpyrrolidinium, and [BMIM]=1-butyl-3-methylimidazolium) are obtained by ionothermal synthesis, with zero-dimensional nodes of uranyl phosphonates linked by steric tetra-topic ligands, namely tetrakis[4-(dihyroxyphosphoryl)phenyl]methane (TppmH₈ ), to give 3D framework structures. Characterization by PXRD, UV/Vis, IR, Raman spectroscopy, and thermogravimetry (TG) were also performed.

Porous Organic Polymers Containing a Sulfur Skeleton for Visible Light Degradation of Organic Dyes

Three novel chemically stable porous organic polymers (POPs) were synthesized by the hydrothermal method; the POPs contain sulfone bonds (TpSD), no sulfur atoms (TpMD), or thioether bonds (TpTD). The catalytic mechanism of the POP with sulfone bonds was studied, and it was found that the wide visible light absorption range, high specific surface area, and the hydrophilicity of the material significantly promoted the catalytic efficiency of TpSD. The presence of O=S=O gives TpSD a higher degree of conjugation than TpMD and TpTD, so TpSD shows the strongest UV/Visible absorption and faster transmission of electrons. The photocatalytic degradation of Rhodamine B (RhB) molecules is approximately 100 % with TpSD and its pseudo-first-order rate constant is 0.0770 min^-1 , which is the highest among all reported non-metallic photocatalysts. Moreover, it is also the first time that sulfur-containing polymer have been used in photocatalytic degradation of dyes.

Cooperative proton transportation based on the reversible single crystal–single crystal transformation in a highly water-stable Cu-MOF with its facile and scalable preparation

A Cu-MOF with excellent acid–base stability in boiling water was constructed under mild conditions. This MOF was very suitable for scaled-up preparation, and exhibits distinct proton conductivity at temperatures above and below 75 °C.

Defective Metal-Organic Frameworks

The targeted incorporation of defects into crystalline matter allows for the manipulation of many properties and has led to relevant discoveries for optimized and even novel technological applications of materials. It is therefore exciting to see that defects are now recognized to be similarly useful in tailoring properties of metal-organic frameworks (MOFs). For instance, heterogeneous catalysis crucially depends on the number of active catalytic sites as well as on diffusion limitations. By the incorporation of missing linker and missing node defects into MOFs, both parameters can be accessed, improving the catalytic properties. Furthermore, the creation of defects allows for adding properties such as electronic conductivity, which are inherently absent in the parent MOFs. Herein, progress of the rapidly evolving field of the past two years is overviewed, putting a focus on properties that are altered by the incorporation and even tailoring of defects in MOFs. A brief account is also given on the emerging quantitative understanding of defects and heterogeneity in MOFs based on scale-bridging computational modeling and simulations.

Visible light induced degradation of pollutant dyes using a self-assembled graphene oxide–molybdenum oxo-bis(dithiolene) composite

An easily separable graphene oxide–molybdenum oxo-bis(dithiolene) ([Ph₄P]₂[MoO(S₂C₂(CN)₂)₂]) composite degraded Rhodamine B and Rose Bengal dye upon visible light exposure.