Luminescence of Amphiphilic PtII Complexes Controlled by Confinement

Chemically fueled dynamic switching between assembly-encoded emissions

Self-assembly provides access to non-covalently synthesized supramolecular materials with distinct properties from a single building block. However, dynamic switching between functional states still remains challenging, but holds enormous potential in material chemistry to design smart materials. Herein, we demonstrate a chemical fuel-mediated strategy to dynamically switch between two distinctly emissive aggregates, originating from the self-assembly of a naphthalimide-appended peptide building block. A molecularly dissolved building block shows very weak blue emission, whereas, in the assembled state (Agg-1), it shows cyan emission through π stacking-mediated excimer emission. The addition of a chemical fuel, ethyl-3-(3-(dimethylamino)propyl)carbodiimide (EDC), converts the terminal aspartic acid present in the building block to an intra-molecularly cyclized anhydride in situ forming a second aggregated state, Agg-2, by changing the molecular packing, thereby transforming the emission to strong blue. Interestingly, the anhydride gets hydrolyzed gradually to reform Agg-1 and the initial cyan emission is restored. The kinetic stability of the strong blue emissive aggregate, Agg-2, can be regulated by the added concentration of the chemical fuel. Moreover, we expand the scope of this system within an agarose gel matrix, which allows us to gain spatiotemporal control over the properties, thereby producing a self-erasable writing system where the chemical fuel acts as the ink.

The Role of a Confined Space on the Reactivity and Emission Properties of Copper(I) Clusters

Metal clusters have gained a lot of interest for their remarkable photoluminescence and catalytic properties. However, a major drawback of such materials is their poor stability in air and humidity conditions. Herein we describe a versatile method to synthesize luminescent Cu(I) clusters inside the pores of zeolites, using a sublimation technique with the help of high vacuum and high temperature. The porous materials play an essential role as a protecting media against the undesirable and easy oxidation of Cu(I). The obtained clusters show fascinating luminescence properties, and their reactivity can be triggered by insertion in the pores of organic monodentate ligands such as pyridine or triphenylphosphine. The coordinating ligands can lead to the formation of Cu(I) complexes with completely different emission properties. In the case of pyridine, the final compound was characterized and identified as a cubane-like structure. A thermochromism effect is also observed, featuring, for instance, a hypsochromic effect for a phosphine derivative at 77K. The stability of the encapsulated systems in zeolites is rather enthralling: they are stable and emissive even after several months in the air.

Dicarboxylate Modulating Molecular-Ionic Platinum Compounds with Variable Stacking and Photoluminescence

Under solvothermal conditions, 10 molecular-ionic platinum compounds [Pt(NIA)₂]·(L)·nH₂O (L = dicarboxylate) were synthesized. In the reaction, acetonitrile undergoes trimerization in situ to generate N-(1-iminoethyl)acetamidine (NIA), which coordinates to Pt^II ions in forming the N-(1-iminoethyl)acetamidine platinum cation, while the organic carboxylates act as anions. Structural analysis shows that carboxylate ligands regulate the mode of packing of [Pt(NIA)₂] in those compounds. Photoluminescence studies show that the photoluminescence behaviors of those compounds also depended on the carboxylate ligands. 1-4, 6, and 7 show blue light emission with fluorescence emission wavelengths of 437-440 nm despite the different carboxylate ligands used. 5 and 8 show green emissions with maximum intensity peak positions of 522 nm. Compared with that of 5 and 8, the emission of 9 and 10 has the same red shifts with peak positions of 567 and 528 nm. The variable-temperature photoluminescence studies reveal that 8 and 10 show two different thermal quenching (TQ) zones in the range of 80-420 K, while the emission intensity of 9 shows negative thermal quenching at low temperatures of 80-220 K and TQ in the range of 220-420 K.

Recent progress and future challenges in the supramolecular polymerization of metal-containing monomers

The self-assembly of discrete molecular entities into functional nanomaterials has become a major research area in the past decades. The library of investigated compounds has diversified significantly, while the field as a whole has matured. The incorporation of metal ions in the molecular design of the (supra-)molecular building blocks greatly expands the potential applications, while also offering a promising approach to control molecular recognition and attractive and/or repulsive intermolecular binding events. Hence, supramolecular polymerization of metal-containing monomers has emerged as a major research focus in the field. In this perspective article, we highlight recent significant advances in supramolecular polymerization of metal-containing monomers and discuss their implications for future research. Additionally, we also outline some major challenges that metallosupramolecular chemists (will) have to face to produce metallosupramolecular polymers (MSPs) with advanced applications and functionalities.

Water-stable lanthanide-organic macrocycles from a 1,2,4-triazole-based chelate for enantiomeric excess detection and pesticide sensing

Water-stable anionic Ln2L2-type (Ln = LaIII and EuIII) lanthanide-organic macrocycles have been constructed by deprotonation self-assembly of a bis-tridentate ligand consisting of two 2,6-bis-(1,2,4-triazole)-pyridine chelation arms bridged by a dibenzofuran chromophore, of which the luminescent Eu2L2 macrocycle can be used for enantiomeric excess (ee) detection toward pybox-type chiral ligands and selective colorimetric sensing of omethoate (OMA) in water.

Smart Nanocages as a Tool for Controlling Supramolecular Aggregation

An important aspect in the field of supramolecular chemistry is the control of the composition and aggregation state of supramolecular polymers and the possibility of stabilizing out-of-equilibrium states. The ability to freeze metastable systems and release them on demand, under spatiotemporal control, to allow their thermodynamic evolution toward the most stable species is a very attractive concept. Such temporal blockage could be realized using stimuli-responsive "boxes" able to trap and redirect supramolecular polymers. In this work, we report the use of a redox responsive nanocontainer, an organosilica nanocage (OSCs), for controlling the dynamic self-assembly pathway of supramolecular aggregates of a luminescent platinum compound (Pt_AC). The aggregation of the complexes leads to different photoluminescent properties that allow visualization of the different assemblies and their evolution. We discovered that the nanocontainers can encapsulate kinetically trapped species characterized by an orange emission, preventing their evolution into the thermodynamically stable aggregation state characterized by blue-emitting fibers. Interestingly, the out-of-equilibrium trapped Pt species (Pt_AC@OSCs) can be released on demand by the redox-triggered degradation of OSCs, re-establishing their self-assembly toward the thermodynamically stable state. To demonstrate that control of the self-assembly pathway occurs also in complex media, we followed the evolution of the supramolecular aggregates inside living cells, where the destruction of the cages allows the intracellular release of Pt_AC aggregates, followed by the formation of microscopic blue emitting fibers. Our approach highlights the importance of "ondemand" confinement as a tool to temporally stabilize transient species which modulate complex self-assembly pathways in supramolecular polymerization.

Tuning energy landscapes and metal-metal interactions in supramolecular polymers regulated by coordination geometry

Herein, we exploit coordination geometry as a new tool to regulate the non-covalent interactions, photophysical properties and energy landscape of supramolecular polymers. To this end, we have designed two self-assembled Pt(ii) complexes 1 and 2 that feature an identical aromatic surface, but differ in the coordination and molecular geometry (linear vs. V-shaped) as a result of judicious ligand choice (monodentate pyridine vs. bidentate bipyridine). Even though both complexes form cooperative supramolecular polymers in methylcyclohexane, their supramolecular and photophysical behaviour differ significantly: while the high preorganization of the bipyridine-based complex 1 enables an H-type 1D stacking with short Pt⋯Pt contacts via a two-step consecutive process, the existence of increased steric effects for the pyridyl-based derivative 2 hinders the formation of metal–metal contacts and induces a single aggregation process into large bundles of fibers. Ultimately, this fine control of Pt⋯Pt distances leads to tuneable luminescence—red for 1vs. blue for 2, which highlights the relevance of coordination geometry for the development of functional supramolecular materials.

In this article, we exploit coordination geometry as a new tool to control the energy landscape and photophysical properties (red vs. blue luminescence) of supramolecular polymers.

Guest Encapsulation within Surface-Adsorbed Self-Assembled Cages

Coordination cages encapsulate a wide variety of guests in the solution state. This ability renders them useful for applications such as catalysis and the sequestration of precious materials. A simple and general method for the immobilization of coordination cages on alumina is reported. Cage loadings are quantified via adsorption isotherms and guest displacement assays demonstrate that the adsorbed cages retain the ability to encapsulate and separate guest and non-guest molecules. Finally, a system of two cages, adsorbed on to different regions of alumina, stabilizes and separates a pair of Diels-Alder reagents. The addition of a single competitive guest results in the controlled release of the reagents, thus triggering their reaction. This method of coordination cage immobilization on solid phases is envisaged to be applicable to the extensive library of reported cages, enabling new applications based upon selective solid-phase molecular encapsulation.

Solvent-driven chirality for luminescent self-assembled structures: experiments and theory

We describe, for a single platinum complex bearing a dipeptide moiety, a solvent-driven interconversion from twisted to straight micrometric assembled structures with different chirality. The photophysical and morphological properties of the aggregates have been investigated as well as the role of the media and concentration. A real-time visualization of the solvent-driven interconversion processes has been achieved by confocal microscopy. Finally, atomistic and coarse-grained simulations, providing results consistent with the experimental observations, allow to obtain a molecular-level insight into the interesting solvent-responsive behavior of this system.

Multinuclear PtII Complexes: Why Three is Better Than Two to Enhance Photophysical Properties

The self-assembly of platinum complexes is a well-documented process that leads to interesting changes of the photophysical and electrochemical behavior as well as to a change in reactivity of the complexes. However, it is still not clear how many metal units must interact in order to achieve the desired properties of a large assembly. This work aimed to clarify the role of the number of interacting PtII units leading to an enhancement of the spectroscopic properties and how to address inter- versus intramolecular processes. Therefore, a series of neutral multinuclear PtII complexes were synthesized and characterized, and their photophysical properties at different concentration were studied. Going from the monomer to dimers, the growth of a new emission band and the enhancement of the emission properties were observed. Upon increasing the platinum units up to three, the monomeric blue emission could not be detected anymore and a concentration independent bright-yellow/orange emission, due to the establishment of intramolecular metallophilic interactions, was observed.

Color-tunable single-fluorophore supramolecular system with assembly-encoded emission

Regulating the fluorescent properties of organic small molecules in a controlled and dynamic manner has been a fundamental research goal. Although several strategies have been exploited, realizing multi-color molecular emission from a single fluorophore remains challenging. Herein, we demonstrate an emissive system by combining pyrene fluorophore and acylhydrazone units, which can generate multi-color switchable fluorescent emissions at different assembled states. Two kinds of supramolecular tools, amphiphilic self-assembly and γ-cyclodextrin mediated host-guest recognition, are used to manipulate the intermolecular aromatic stacking distances, resulting in the tunable fluorescent emission ranging from blue to yellow, including a pure white-light emission. Moreover, an external chemical signal, amylase, is introduced to control the assembly states of the system on a time scale, generating a distinct dynamic emission system. The dynamic properties of this multi-color fluorescent system can be also enabled in a hydrogel network, exhibiting a promising potential for intelligent fluorescent materials.

Regulating fluorescent properties of small molecules in a controlled manner has been a fundamental research goal but realizing multi-color emission from a single fluorophore remains challenging. Here the authros demonstrate that combined pyrene fluorophore and acylhydrazone units show multi-color switchable fluorescent at different assembled states.

Fast and stable vapochromic response induced through nanocrystal formation of a luminescent platinum(II) complex on periodic mesoporous organosilica

A hybrid vapoluminescent system exhibiting fast and repeatable response was constructed using periodic mesoporous organosilica with bipyridine moieties (BPy-PMO) and a Pt(II) complex bearing a potentially luminescent 2-phenylpyridinato (ppy) ligand. An intense red luminescence appeared when the Pt(II)-complex immobilised BPy-PMO was exposed to methanol vapour and disappeared on exposure to pyridine vapour. The ON-OFF vapochromic behaviour occurred repeatedly in a methanol/pyridine/heating cycle. Interestingly, a rapid response was achieved in the second cycle and cycles thereafter. Scanning and transmission electron microscopies (SEM/TEM), absorption and emission, and nuclear magnetic resonance spectroscopies, mass spectrometry, and powder X-ray diffraction indicated that methanol vapour induced Si-C cleavage and thus liberated [Pt(ppy)(bpy)]Cl (bpy = 2,2′-bipyridine) from the BPy-PMO framework. Furthermore, the self-assembling properties of the Pt(II) complex resulted in the formation of highly luminescent micro/nanocrystals that were homogeneously dispersed on the porous support. The unique vapoluminescence triggered by the unprecedented protodesilylation on exposure to protic solvent vapour at room temperature is attributable to BPy-PMO being a giant ligand and an effective vapour condenser. Consequently, this hybrid system presents a new strategy for developing sensors using bulk powdery materials.