Recent Advances in Aggregation-Induced Electrochemiluminescence

1,1,2,2-Tetra(4-carboxylphenyl)ethylene-Based Metal-Organic Gel as Aggregation-Induced Electrochemiluminescence Emitter for the Detection of Aflatoxin B1 Based on Nanosurface Energy Transfer

In this Letter, a sensitive DNA sensing platform was developed using an indium-ion-coordinated 1,1,2,2-tetra(4-carboxylphenyl)ethylene (TPE) metal-organic gel (In-MOG) as an aggregation-induced electrochemiluminescence (AIECL) emitter and nanosurface energy transfer (NSET) as an efficient quenching strategy for detecting aflatoxin B1 (AFB1), the most dangerous food toxin. The coordination occurred in indium ions, and carboxyl groups restricted the internal rotation and vibration of TPE molecules, forcing them to release photons via radiative transitions. The quenchers of microfluidic-produced gold nanoparticles were embedded in a long-tailed triangular DNA structure, where the quenching phenomenon aligned with the theory of ECL-NSET under the overlap of spectra and appropriate donor-acceptor spacing. The proposed analytical method showed a sensitive ECL response to AFB1 in the wide concentration range of 0.50-200.00 ng/mL with a limit of detection of 0.17 ng/mL. Experimental results confirmed that constraining luminescent molecules using coordination and bonding to trigger the AIECL phenomenon was a promising method to prepare signal labels for the trace detection of food toxins.

Synthesis of silica-encapsulated tetraphenylethylene with aggregation-induced electrochemiluminescence resonance energy transfer for sensitively sensing microcystin-LR

The reported organic electrochemiluminescence (ECL) luminophors for the detection of various markers often suffer from intermolecular π-π stacking-induced luminophore quenching. Herein, we demonstrate one-pot synthesis of a new aggregation-induced electrochemiluminescence (AIECL) emitter (i.e., TPE@SiO2/rGO composite) for sensitive measurement of microcystin-leucine arginine (MC-LR). The TPE@SiO2/rGO composite is constructed by embedding the silica-encapsuled 1,1,2,2-tetra(4-carboxylphenyl)ethylene (TPE) in the reduced graphene oxide. In comparison with the monomer TPE, this composite exhibit high luminescence efficiency and strong ECL emission, because the AIECL phenomenon triggered by the spatial confinement effect in the SiO2 cage induces the restriction of the internal motion and vibration of molecules. Notably, this composite has distinct advantages of easy preparation, simple functionalization, and stable luminescence. Especially, the TPE@SiO2/rGO-based ECL-RET system exhibits a high quenching efficiency (ΦET) of 69.7%. When target MC-LR is present, it triggers DNA strand displacement reaction (SDR), inducing the quenching of the ECL signal of TPE@SiO2/rGO composite due to ECL resonance energy transfer between TPE@SiO2/rGO composite and methylene blue (MB). The proposed biosensor enables highly sensitive, low-cost, and robust measurement of MC-LR with a large dynamic range of 7 orders of magnitude and a detection limit of 3.78 fg/mL, and it displays excellent detection performance in complex biological matrices, holding potential applications in food safety and water monitoring.

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

Rigidifying AIEgens in covalent organic framework nanosheets for electrochemiluminescence enhancement: TABE-PZ-CON as a novel emitter for microRNA-21 detection

Enhancing electrochemiluminescence (ECL) properties of luminophores is a hot direction in the current ECL field. Herein, we found that covalent rigidification of the aggregation-induced emission luminogens (AIEgens) TABE (TABE = tetra-(4-aldehyde-(1,1-biphenyl))ethylene) into covalent organic framework nanosheets (TABE-PZ-CON, PZ = piperazine) could result in stronger ECL emission than those of TABE aggregates and TABE monomers. We termed the interesting phenomenon "covalent rigidification-triggered electrochemiluminescence (CRT-ECL) enhancement". The superior ECL performance of TABE-PZ-CON not only because massive TABE luminogens were covalently assembled into the rigid TABE-PZ-CON network, which limited the intramolecular motions of TABE and hampered the radiationless transition, but also because the ultrathin porous TABE-PZ-CON significantly reduced the transportation distance of ions, electrons, and coreactants, which enabled the electrochemical excitation of more TABE luminogens and thus enhanced the ECL efficiency. Bearing in mind the exceptional ECL performance of TABE-PZ-CON, it was utilized as a high-efficient ECL indicator in combination with the DNA walker and duplex-specific nuclease-assisted target recycling amplification strategies to design an "off-on" ECL biosensor for the ultrasensitive assay of microRNA-21, exhibiting a favorable response range (100 aM-1 nM) with an ultralow detection limit of 17.9 aM. Overall, this work offers a valid way to inhibit the intramolecular motions of AIEgens for ECL enhancement, which gives a new vision for building high-performance AIEgen-based ECL materials, thus offering more chances for assembling hypersensitive ECL biosensors.

Ultrasensitive Electrochemiluminescence Sensor Utilizing Aggregation-Induced Emission Active Probe for Accurate Arsenite Quantification in Rice Grains

Arsenic (As) constitutes a substantial threat to global ecosystems and public health. An accurate quantification of inorganic arsenite (As(III)) in rice grains is crucial for ensuring food safety and human well-being. Herein, we constructed an electrochemiluminescence (ECL) biosensor utilizing aggregation-induced emission (AIE) active Pdots for the sensitive detection of As(III) in rice. We synthesized tetraphenylethylene-based AIE-active Pdots, exhibiting stable and highly efficient ECL emission in their aggregated states. Owing to the overlap of spectra, we employed an electrochemiluminescence resonance energy transfer (ECL-RET) system, with the Pdots as the donor and black hole quencher (BHQ) as the acceptor. Upon the introduction of As(III), the conformational changes of As(III)-specific aptamer could trigger the detachment of BHQ-labeled DNA aptamer from the electrode surface, leading to the recovery of the ECL signal. The target-induced "signal-on" bioassay enabled the sensitive and specific detection of As(III) with a linear range of 10 pM to 500 nM, with an ultralow limit of detection (LOD) of 5.8 pM/0.4 ppt. These values significantly surpass those of existing sensors designed for As(III) quantification in rice. Furthermore, by employing amylase hydrolysis for efficient extraction, we successfully applied our sensor to measure As(III) in actual rice samples sourced from diverse regions of China. The results obtained using our sensor were in close agreement with those derived from the reference method of HPLC-ICP-MS. This study not only presents a sensitive and reliable method for detecting arsenite but also underscores its potential applications in enhancing food safety, agriculture practices, and environmental monitoring.

Aggregation-Induced Enhanced Electrochemiluminescence from Tris(bipyridine)ruthenium(II) Derivative Nanosheets for the Ultrasensitive Detection of Human Telomerase RNA

The traditional tris(bipyridine)ruthenium(II) complex suffers from the notorious aggregation-caused quenching effect, which greatly compromises its electrochemiluminescence (ECL) efficiency, thus hindering further applications in biosensing and clinical diagnosis. Here, the ultrathin tetraphenylethylene-active tris(bipyridine)ruthenium(II) derivative nanosheets (abbreviated as Ru-TPE NSs) are synthesized through a protein-assisted self-assembly strategy for ultrasensitive ECL detection of human telomerase RNA (hTR) for the first time. The synthesized Ru-TPE NSs exhibit the aggregation-induced enhanced ECL behavior and excellent water-dispersion. Surprisingly, up to a 106.5-fold increase in the ECL efficiency of Ru-TPE NSs is demonstrated compared with the dispersed molecules in an organic solution. The restriction of intramolecular motions is confirmed to be responsible for the significant ECL enhancement. Therefore, this proposed ECL biosensor shows high sensitivity and excellent selectivity for hTR based on Ru-TPE NSs as efficient ECL beacons and the catalytic hairpin assembly as signal amplification, whose detection limit is as low as 8.0 fm, which is far superior to the previously reported works. Here, a promising analytical method is provided for early clinical diagnosis and a new type of efficient ECL emitters with great application prospects is represented.

Nitrogen-Doped Graphene Quantum Dots as Electrochemiluminescence-Emitting Species for Sensitive Detection of KRAS G12C Mutation via PET-RAFT

The levels of KRAS G12C point mutation is recognized to be closely related to the earlier diagnosis of non-small cell lung cancer (NSCLC). Here, based on nitrogen-doped graphene quantum dots (NGQDs) and photo-induced electron/energy transfer reversible addition-fragment chain transfer (PET-RAFT) signal amplification strategy, we fabricated a novel electrochemiluminescence (ECL) biosensor for the detection of KRAS G12C mutation for the first time. NGQDs as ECL-emitting species with cathodic ECL were prepared by a simple calcination method. Firstly, KRAS G12C mutation DNA, i. e., target DNA (tDNA), was captured by specific identification with hairpin DNA (hDNA). Then, PET-RAFT was initiated by blue light, and large numbers of monomers were successfully polymerized to form controllable polymer chains. Lastly, massive NGQDs was introduced via amidation reaction with N-(3-aminopropyl)methacrylamide hydrochloride (APMA), which significantly amplified the ECL signal intensity. Under optimal conditions, this biosensor achieved a good linear relationship between ECL intensity and logarithm of the levels of KRAS G12C mutation in the range from 10 fM to 10 nM. Moreover, this strategy exhibited high selectivity and excellent applicability for KRAS G12C mutation detection in the serum samples. Therefore, this biosensor has great potential in clinical diagnosis and practical application.

Highly Efficient Electrochemiluminescence from Imidazole-Based Thermally Activated Delayed Fluorescence Emitters

A family of novel thermally activated delayed fluorescence (TADF) emitters has been synthesized by a straightforward and metal-free synthesis, and structurally characterized. In this work we kept the acceptor moiety, 4-(1H-imidazol-1-yl)benzonitrile, fixed and systemically tested different donors to correlate their photophysical and electrochemical properties with their performance in electrochemiluminescence using both benzoyl peroxide as co-reactant and co-reactant free (annihilation) conditions. Some compounds exceeded the efficiency of the standard [Ru(bpy)3 ]Cl2 by up to 28 times with benzoyl peroxide and 38 times in annihilation. Interestingly, we found that the efficiency is mainly dictated by the electrochemical reversibility of the redox processes rather than by the photophysical properties in terms of photoluminescence quantum yields or excited-state lifetime. In addition, the annihilation electrochemiluminescence efficiency strongly depends on the pulse sequence. The imidazole moiety can be conveniently alkylated, thus allowing the insertion of functional groups, such a carboxylic acid, and enabling practical applications.

High AIECL performance of tetraphenylethene derivatives originated from the linear increasing of benzene ring and solvent regulation for sensitive measurement of melatonin

The efficiency of aggregation-induced electrochemiluminescence (AIECL) in tetraphenylethene (TPE) derivatives were significantly enhanced by combining the regulation of molecular structure and solvent. Firstly, the linear increase of the benzene ring resulted in enhanced molecular aggregation and promoted the electrochemical reaction of the anode, due to increased molecular conjugation and higher lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO). The ECL efficiency of 4,4,4,4-(Ethene-1,1,2,2-tetrayl) tetrakis (([1,1,4,1-terphenyl]-4-carbaldehyde)) (T3) nanoparticles (NPs) with more benzene rings were 5558 times that of 4,4,4,4-(ethene-1,1,2,2-tetrayl) tetrabenzaldehyde (T1) NPs, and its relative ECL efficiency of T3 NPs reached 55.58% compared to the [Ru (bpy)3]2+/tripropylamine (TPrA) system. Furthermore, solvents with different polarities played a crucial role in modulating the degree of molecular aggregation, which also effectively facilitated the AIE process and reduced the aggregation-caused quenching (ACQ) effect caused by excessively dense aggregation. This aspect had often been overlooked in previous AIECL studies. T3 NPs demonstrated optimal ECL performance at fw = 70% (fw was the H2O content in tetrahydrofuran (THF)/H2O), and its ECL efficiency was 232 times greater than fw = 100% and 1853 times greater than fw = 0%. Additionally, it was found that melatonin (MT), one of the hormones widely used to treat insomnia, exhibited antioxidant and free radical scavenging properties, which exerted a significant quenching effect on the ECL of the T3 NPs/TPrA system. Consequently, a sensitive sensing platform was developed for MT with a low detection limit of 8.78 × 10-10 mol L-1, which promoted the application of AIECL in efficient ultra-sensitive biosensing.

Facile preparation of poly-(styrene-co-maleic anhydride) encapsulated Iridium(III) complexes as highly efficient electrochemiluminescence indicators for sensitive immunoassay of CYFRA 21-1

Exploring facile strategy for developing highly efficient emitters using water-insoluble luminophores has become a vital topic in electrochemiluminescence (ECL) immunoassay. In this work, an ECL-active and water-dispersive iridium(III) complex-based polymer dots (IrPdots) was fabricated by encapsulating water-insoluble tris[1-phenylisoquinolinato-C2, N] iridium(III) complexes [Ir(piq)₃] into poly-(styrene-co-maleic anhydride) (PSMA) matrix by a controllable nanoprecipitation process. The obtained IrPdots generated strong ECL signals in the presence of tri-n-propylamine (TPrA) and were used to label detection antibody (Ab₂) to act as ECL probes to indicate the signal changes when analyzing target antigen. To construct a sandwich immunosensor, Pd nanoparticles (NPs) decorated MoS₂/Ti₃C₂T_x MXene nanocomposites (MoS₂/Ti₃C₂T_x MXene/Pd) were fabricated as substrates to bind capture antibody (Ab₁), which could further amplify ECL signals via a coreaction-accelerating pathway to improve the detection sensitivity. When the cytokeratin 19 fragment 21-1 (CYFRA 21-1) was chosen as model analyte, the developed immunosensor displayed a good linear relationship ranging from 0.1 pg/mL to 50 ng/mL with a low detection limit of 95 fg/mL (S/N = 3) was achieved as well. This research proposed a facile and effective method of fabricating IrPdots as ECL probes for immunoassay using water-insoluble iridium complexes, which expanded the application scope of those water-insoluble luminophores for aqueous bioanalysis.

Materials for Electrochemiluminescence: TADF, Hydrogen-Bonding, and Aggregation- and Crystallization-Induced Emission Luminophores

Electrochemiluminescence (ECL) is a rapidly growing discipline with many analytical applications from immunoassays to single-molecule detection. At the forefront of ECL research is materials chemistry, which looks at engineering new materials and compounds exhibiting enhanced ECL efficiencies compared to conventional fluorescent materials. In this review, we summarize recent molecular design strategies that lead to high efficiency ECL. In particular, we feature recent advances in the use of thermally activated delayed fluorescence (TADF) emitters to produce enhanced electrochemiluminescence. We also document how hydrogen bonding, aggregation, and crystallization can each be recruited in the design of materials showing enhanced electrochemiluminescence.

Dual Signal-Enhanced Electrochemiluminescence Strategy Based on Functionalized Biochar for Detecting Aflatoxin B1

Metal-organic frameworks (MOFs) are often used as carriers in the preparation of electrochemiluminescent (ECL) materials, and ECL materials stabilized in the aqueous phase can be prepared by encapsulating chromophores inside MOFs by an in situ growth method. In this study, nanocomposites MIL-88B(Fe)-NH2@Ru(py)32+ with excellent ECL response were prepared by encapsulating Tris(2,2'-bipyridine)ruthenium dichloride (Ru(py)32+) inside MIL-88B(Fe)-NH2 using the one-step hydrothermal method. MIL-88B(Fe)-NH2 possesses abundant amino groups, which can accelerate the catalytic activation process of K2S2O8, and its abundant pores are also conducive to the enhancement of the transmission rate of co-reactant agents, ions, and electrons, which effectively improves the ECL efficiency. In order to obtain more excellent ECL signals, we prepared aminated biochar (NH2-biochar) using Pu-erh tea dregs as precursor and loaded gold nanoparticles (Au NPs) on its surface as substrate material for modified electrodes. Both NH2-biochar and Au NPs can also be used as a co-reactant promoter to catalyze the activation process of co-reactant K2S2O8. Therefore, a sandwich-type ECL immunosensor was prepared based on a dual signal-enhanced strategy for the highly sensitive and selective detection of aflatoxin B1 (AFB1). Under the optimal experimental conditions, the sensitive detection of AFB1 was achieved in the range of 1 pg·mL-1~100 ng·mL-1 with a detection limit of 209 fg·mL-1. The proposed dual signal-enhanced ECL immunosensor can provide a simple, convenient, and efficient method for the sensitive detection of AFB1 in food and agricultural products.

Impact of the metal core on the electrochemiluminescence of a pair of atomically precise Au20 nanocluster isomers

Although the electrochemiluminescence (ECL) of metal nanoclusters has been reported, revealing the correlation between structure and ECL at an atomic level is highly challenging. Here, we reported the impact of the metal core of Au₂₀(SAdm)₁₂(CHT)₄ (Au₂₀-AC for short; SAdm = 1-adamantanethiolate; CHT= cyclohexanethiol) and its isomer Au₂₀(TBBT)₁₆ (TBBT = 4-tert-butylthiophenol) on their solution-state and solid-state electrochemiluminescence. In self-annihilation ECL experiments, Au₂₀-AC showed a strong cathodic ECL but a weak anodic ECL, while the ECL signal of Au₂₀(TBBT)₁₆ was weak and barely detectable. Density functional theory (DFT) calculations showed that the Au₇ kernel of [Au₂₀-AC]^- is metastable, weakening its anodic ECL. Au₂₀-AC in solution-state displayed an intense co-reactant ECL in the near-infrared region, which is 7 times higher than that of standard Ru(bpy)₃²⁺. The strongest solid-state ECL emissions of Au₂₀-AC and Au₂₀(TBBT)₁₆ were at 860 and 770 nm, respectively - 15 nm red-shifted for Au₂₀-AC and 20 nm blue-shifted for Au₂₀(TBBT)₁₆, compared to their corresponding solid-state photoluminescence (PL) emissions. This work shows that ECL is significantly affected by the subtle differences of the metal core, and offers a potential basis for sensing and immunoassay platforms based on atomically precise emissive metal nanoclusters.

Visualized electrochemiluminescence iodine sensor based on polymer dots with Co-reactive group for real-time monitoring system

Trace iodine (I₂) radioisotopes are commonly regarded as an indicator in nuclear security early warnings. Herein, we develop a visualized I₂ real-time monitoring system using electrochemiluminescence (ECL) imaging technology for the first time. In detail, the polymers based on poly [(9,9-dioctylfluorene-alkenyl-2,7-diyl)-alt-co-(1,4-benzo-{2,1',3}-thiadiazole)] are synthesized for iodine detection. An ultra-low limit of detection (0.01 ppt) to iodine can be achieved by adding the modification ratio of tertiary amine onto PFBT as a co-reactive group, which is the lowest detection limit in known iodine vapor sensors. This result can be attributed to the co-reactive group poisoning response mechanism. Considering to the strong ECL behavior of this polymer dots, P-3 Pdots with ultra-low detection limit for iodine is combined with ECL imaging technology to realize the visualized rapid I₂ vapor response with high selectivity. ECL imaging component based on ITO electrode can make iodine monitoring system more convenient and suitable for real-time detection in early warning of nuclear emergency. The detection result cannot be affected by vapor of organic compounds, humidity and temperature, indicating a good selectivity to iodine. This work provides a strategy for nuclear emergency early warning, showing its significance in environmental and nuclear security fields.

Advances in electrochemiluminescence luminophores based on small organic molecules for biosensing

Electrochemiluminescence (ECL) has several advantages, such as a near-zero background signal, high sensitivity, wide dynamic range, simplicity, and is widely used for sensing, imaging, and single cell analysis. ECL luminophores are the key factors in the performance of various applications. Among various luminophores, small organic luminophores exhibit many intriguing features including good biocompatibility, facile modification, well-defined molecular structure, and sustainable raw materials, making small organic luminophores attractive for the use in the ECL field. Although many great achievements have been made in the synthesis of new small organic luminophores, solving various challenges, and expanding new applications, there are almost no comprehensive reviews on small organic ECL luminophores. In this review, we briefly introduce the advantages and emission mechanisms of small organic ECL luminophores, summarize the main types, molecular characteristics, and ECL properties of most existing small organic ECL luminophores, and present the important applications and design principles in sensors, imaging, single cell analysis, sterilization, and other fields. Finally, the challenges and outlook of organic ECL luminophores to be popularized in biosensing applications are also discussed.

Hexagon AgNCs/PVP Crystallization Induced Cathode Electrochemiluminescence Enhancement for miRNA221 Biosensing

Aggredation-induced electrochemiluminescence (AIECL) promises an efficient strategy for synthesize highly luminescent emitter and co-reactant for ECL analysis, however, rational control of electrogenerated emission intensity is still challenging. The low electroconductivity and amorphous molecular configuration are intrinsic bottleneck. This work reveals the impact of polyvinyl pyrrolidone backbone regulated silver nanocrystallines (AgNCs/PVP) on the cathode AIECL properties in near infrared region, by employing the Box-Behnken designed response surface computation model to modulate crystal aggregates. Electron paramagnetic resonance spectroscopy discovered hydrogen radical (HO^• ) dominant reductive-oxidative (R-O) ECL mechanism with AgNCs acting as the co-reaction accelerator in graphene oxide/persulfate system (GO/S₂ O₈ ^2- ). Both theoretical calculation and experimental measurement testified that the ECL of AgNCs in GO/S₂ O₈ ^2- dependent on the concentration of in situ electrochemical oxidized Ag⁺ . The high efficiency of crystallization-induced enhanced ECL (CIECL) originates from 1) the effective electron transfer of Ag⁺ accelerated HO^• produce to notable promote radioactive transition, and 2) twisted intramolecular charge transfer from the electron-rich donor of PVP to electron-deficient receptor of Ag⁰ to restrict nonradioactive transition. The AgNCs/PVP with CIECL effect are applied to construct an ultrasensitive platform for miR-221 assay with a lower detection limit of 7.47 × 10³  copies mL^-1 than typical qPCR method.

Recent Progress in Plasmonic based Electrochemiluminescence Biosensors: A Review

Electrochemiluminescence (ECL) analysis has become a powerful tool in recent biomarker detection and clinic diagnosis due to its high sensitivity and broad linear range. To improve the analytical performance of ECL biosensors, various advanced nanomaterials have been introduced to regulate the ECL signal such as graphene, gold nanomaterials, and quantum dots. Among these nanomaterials, some plasmonic nanostructures play important roles in the fabrication of ECL biosensors. The plasmon effect for the ECL signal includes ECL quenching by resonant energy transfer, ECL enhancement by surface plasmon resonance enhancement, and a change in the polarized angle of ECL emission. The influence can be regulated by the distance between ECL emitters and plasmonic materials, and the characteristics of polarization angle-dependent surface plasmon coupling. This paper outlines the recent advances of plasmonic based ECL biosensors involving various plasmonic materials including noble metals and semiconductor nanomaterials. The detection targets in these biosensors range from small molecules, proteins, nucleic acids, and cells thanks to the plasmonic effect. In addition to ECL biosensors, ECL microscopy analysis with plasmonic materials is also highlighted because of the enhanced ECL image quality by the plasmonic effect. Finally, the future opportunities and challenges are discussed if more plasmonic effects are introduced into the ECL realm.

BODIPY-based metal-organic frameworks as efficient electrochemiluminescence emitters for telomerase detection

A boron dipyrromethene (BODIPY)-based metal-organic framework (MOF) nanoemitter was for the first time designed with enhanced electrochemiluminescence (ECL) intensity due to the suppression of non-radiative dissipation originating from the ordered arrangement of BODIPY molecules in the framework. Thus, an ECL biosensor was developed for telomerase detection with excellent performance in real samples.

Enhanced Electrochemiluminescence of A Macrocyclic Tetradentate Chelate Pt(II) Molecule via Its Collisional Interactions with the Electrode

A macrocyclic tetradentate chelate Pt(II) molecule (Pt1) served as an excellent luminophore in electrochemiluminescence (ECL) processes. The blue ECL of Pt1/S2O82- coreactant system in N,N'-dimethylformamide was found to be 46 times higher than that of the Ru(bpy)2+/S2O82- system or 30 times higher than that of the 9,10-diphenylanthracene/S2O82- system. The unprecedented high ECL quantum efficiencies were caused by the cyclic generation of monomer excited states through collisional interactions of Pt1 molecules with the electrode at an elevated frequency. The ECL is tunable from bright blue to pure white by simply changing the solvent from N,N'-dimethylformamide to dichloromethane. The white ECL of Pt(II) molecule was reported for the first time and the mechanism was proposed to be the simultaneous emissions from the monomer excited state (blue) and excimer (red).

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

Quantum dots for electrochemiluminescence bioanalysis - A review

Electrochemiluminescence (ECL) bioanalysis has become increasingly important in various fields from bioanalysis to clinical diagnosis due to its outstanding merits, including low background signal, high sensitivity, and simple instrumentation. Quantum dots (QDs) are a significant theme in ECL bioanalysis since their excellent optical, electrochemical properties, and ease of functionalization endow them with versatile roles and new mechanisms of signal transduction in ECL. Herein, this review details recent advances of QDs-based ECL bioanalysis by using QDs as ECL emitters, coreactants, or ECL resonance energy transfer donors/acceptors, mainly focused on their optical and electrochemical properties and ECL reaction mechanism. In the end, we will discuss the current limitations and future developments in QDs ECL bioanalysis to address the requirement about selectivity, sensitivity, toxicity, and emerging applications.

Covalent Organic Frameworks as Advanced Uranyl Electrochemiluminescence Monitoring Platforms

Electrochemiluminescence (ECL), as an advanced sensing process, can selectively control the generation of excited states by changing the potential. However, most of the existing ECL systems rely on poisonous coreactants to provide radicals for luminescence; although the ECL efficiency was improved, the athematic coreactants will cause unpredictable interference to the accurate analysis of trace targets. Herein, we realized the ECL of nonemitting molecules by performing intramolecular electron transfer in the olefin-linked covalent organic frameworks (COFs), with a high efficiency of 63.7%. Employing internal dissolved oxygen as the coreactant, it is well suitable for the analysis of various complex samples in the environment. Taking nuclear contamination analysis as the goal orientation, we further illustrated a design of a "turn-on" uranyl ion monitoring system integrating fast response, low detection limit, and high selectivity, showing that new ECL-COFs are promising to facilitate environment-related sensing analysis and structure-feature correlation mechanism exploration.

Facile Encapsulation of Iridium(III) Complexes in Apoferritin Nanocages as Promising Electrochemiluminescence Nanodots for Immunoassays

A class of water-soluble electrochemiluminescence (ECL) nanodots were prepared by encapsulating ECL-active iridium complexes into biocompatible horse spleen apoferritin (apoHSF) nanocages for immunoassays. The preparation feasibility was achieved based on the pH-induced disassembly/reassembly nature originated from apoHSF. Two iridium nanodots (1 and 2) with high ECL efficiency were separately prepared by directing the self-assembly of two water-insoluble luminescent complexes, Ir(ppy)₃ (ppy = 2-phenylpyridine) and Ir(ppy)₂(acac) (ppy = 2-phenylpyridine and acac = acetylacetonate), in the apoHSF cavity. Using tri-n-propylamine (TPrA) as a coreactant, the electrochemistry and "oxidative-reductive" ECL mechanisms for nanodots 1 and 2 were investigated, respectively. After demonstrating the spectroscopic property and relative ECL efficiency, the ECL emission of nanodots 1 and 2 quenched by TPrA^• radicals at high potential was further studied and circumvented by optimizing the potential range and TPrA concentration for generating strong and stable ECL emission in aqueous media. The well-inherited biological functions of apoHSF in nanodots allow the convenient external modification of an antibody to act as a signal probe, thus a versatile ECL immunoassay paradigm was established. Acceptable results from this assay enabled the rapid and accurate detection of biomarkers in real samples. The unprecedented use of apoHSF is feasible and applicable for water-insoluble iridium complexes to fabricate a wide variety of biocompatible ECL nanodots for potential bioanalysis.

A general design approach toward covalent organic frameworks for highly efficient electrochemiluminescence

Electrochemiluminescence (ECL) plays a key role in analysis and sensing because of its high sensitivity and low background. Its wide applications are however limited by a lack of highly tunable ECL luminophores. Here we develop a scalable method to design ECL emitters of covalent organic frameworks (COFs) in aqueous medium by simultaneously restricting the donor and acceptor to the COFs' tight electron configurations and constructing high-speed charge transport networks through olefin linkages. This design allows efficient intramolecular charge transfer for strong ECL, and no exogenous poisonous co-reactants are needed. Olefin-linked donor-acceptor conjugated COFs, systematically synthesized by combining non-ECL active monomers with C_2v or C_3v symmetry, exhibit strong ECL signals, which can be boosted by increasing the chain length and conjugation of monomers. The present concept demonstrates that the highly efficient COF-based ECL luminophores can be precisely designed, providing a promising direction toward COF-based ECL phosphors.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Label-free immunosensor for cardiac troponin I detection based on aggregation-induced electrochemiluminescence of a distyrylarylene derivative

Herein, the aggregation-induced electrochemiluminescence (AIECL) of a distyrylarylene derivative, 4,4'-bis(2,2-diphenylvinyl)-1,1'-biphenyl (DPVBi), was investigated for the first time. This luminophore exhibits significantly enhanced photoluminescence (PL) and electrochemiluminescence (ECL) emission with the increases of water content in organic/water mixtures. This high luminescence efficiency of DPVBi in aggregate state is due to the fact that the aggregates can reduce the energy loss by restricting the intramolecular motions. The ECL behavior of DPVBi in acetonitrile was investigated by ECL transients and so-called "half-scan" technology, where singlet-singlet annihilation ECL was generated under continuous potential switching. The DPVBi nanobulks (DPVBi NBs) were prepared to improve its application in aqueous media, which could be conveniently cast on electrode surface for developing sensing platform due to its good film-forming nature. The constructed heterogeneous AIECL platform can produce reductive-oxidative and oxidative-reductive ECL by using trimethylamine (TEA) and potassium peroxodisulfate (K₂S₂O₈) as coreactant. On the basis of the higher ECL efficiency of DPVBi NBs/TEA system, a label free immunosensor for cardiac troponin I (cTnI) was developed with the assistance of electrodeposited gold nanoparticles, and it showed a wide linear range of 20 ng/mL~100 fg/mL and low detection limit of 43 fg/mL. Moreover, the constructed immunosensor also exhibited good specificity, stability and satisfied performance in practical sample analysis.

Bipolar Aggregation-Induced Electrochemiluminescence of Thiophene-Fused Conjugated Microporous Polymers

Herein, we synthesize the thiophene tetraphenylethene-based conjugated microporous polymer (ThT-CMP) using the tetraphenylethylene derivative [i.e., 1,1,2,2-tetrakis(4-bromophenyl)ethane (TPBE)] and 2,5-thiophenediboronic acid as the precursors. The aggregation of TPBE in the ThT-CMP can induce a strong dual-band bipolar electrochemiluminescence (AIECL) emission at 554 nm (anodic) and 559 nm (cathodic) with tri-n-propylamine (TPrA) and S₂O₈^2- as the coreactants, respectively. The anodic and cathodic ECL efficiencies are measured to be 11.49 and 3.82% with respect to the standard of the Ru(bpy)₃²⁺/TPrA system, respectively. We further develop a dipolar ECL sensor to sensitively detect rhodamine B (RhB) based on resonance energy transfer. This ECL sensor possesses a large dynamic range and high sensitivity. This research provides a new avenue of designing organic structures with the characteristic of bipolar AIECL for the development of luminescent devices.

Aggregation-Induced Emission in Electrochemiluminescence: Advances and Perspectives

The discovery of aggregation-induced electrochemiluminescence (AIECL) in 2017 opened new research paths in the quest for novel, more efficient emitters and platforms for biological and environmental sensing applications. The great abundance of fluorophores presenting aggregation-induced emission in aqueous media renders AIECL a potentially powerful tool for future diagnostics. In the short time following this discovery, many scientists have found the phenomenon interesting, with research findings contributing to advances in the comprehension of the processes involved and in attempts to design new sensing platforms. Herein, we explore these advances and reflect on the future directions to take for the development of sensing devices based on AIECL.

Turn-on fluorescent naphthalimide-benzothiazole probe for cyanide detection and its two-mode aggregation-induced emission behavior

Naphthalimide-benzothiazole conjugate (NBTZ) linked by cinnamonitrile was designed, synthesized, and fully characterized by NMR (¹H, ¹³C, DEPT, HSQC) and high-resolution mass spectrometry. NBTZ exhibited unique turn-on fluorescence in the presence of CN^- with relatively high selectivity compared to other anions such as SCN^-, HSO₄^-, ClO₄^-, NO₃^-, Cl^-, Br^-, I^-, and PO₄^-3 in tetrahydrofuran (THF). The detection limit for CN^- was found to be 3.35 × 10^-8 M in THF. The sensing mechanism was analyzed through ¹H, ¹³C, DEPT, and mass spectroscopy. NBTZ also showed two-mode aggregation-induced emission (AIE) in THF-H₂O mixtures. In a 30:70 THF-H₂O (v/v) mixture, the maximum AIE was observed at 430 nm (blue) because of the rotation of the CC bond between the naphthalimide ring and the phenyl ring was restricted. In 10:90 THF-H₂O (v/v), a new red-shifted AIE appeared at 490 nm (cyan), due to the extended π-conjugation induced by restriction of rotation of the CC bond between the benzothiazole and naphthalimide rings.

Ultrasensitive Nucleic Acid Assay Based on AIE-Active Polymer Dots with Excellent Electrochemiluminescence Stability

Aggregation-induced emission (AIE) active Pdots are attractive nanomaterials applied in electrochemiluminescence (ECL) fields, while the irreversible redox reaction of these Pdots is a prevailing problem, resulting in instability of ECL emission. Herein, we first designed and synthesized an AIE-active Pdot with reversible redox property, which contains a tetraphenylethene derivate and benzothiadiazole (BT) to achieve stable ECL emission. BT has a good rigid structure with excellent electrochemical behaviors, which is beneficial for avoiding the destruction of the conjugated structure as much as possible during the preparation of Pdots, thus maintaining good redox property. The tetraphenylethene derivate, as a typical AIE-active moiety, provides a channel for highly efficient luminescence in the aggregated states. The Pdots exhibited reversible and quasi-reversible electrochemical behaviors during cathodic and anodic scanning, respectively. The stable annihilation, reductive-oxidative, and oxidative-reductive ECL signals were observed. Subsequently, we constructed an ultrasensitive ECL biosensor based on the oxidative-reductive ECL mode for the detection of miRNA-21 with a detection limit of 32 aM. This work provides some inspiration for the future design of ECL materials featuring AIE-active property and stable ECL emission.

Advances in electrochemiluminescence co-reaction accelerator and its analytical applications

Electrochemiluminescence (ECL) can be produced through two main routes: annihilation route and coreactant route. The vast majority of applications of ECL are based on coreactant ECL which can be generated in aqueous media at relatively low potentials compared with organic solvents. However, the development of more efficient ECL systems remains a compelling goal. Co-reaction accelerator (CRA) can significantly enhance the ECL signal through promoting more production of the coreactant intermediate. Compared with other ECL enhancement strategies, the CRA protocol is distinctive owing to its diverse, simple, and highly effective features. Various species such as inorganic compound, organic compound, and nanomaterials (NMs) have been developed as CRA and NM CRA has gained particular attention owing to their unique properties of excellent catalytic behavior and large surface area. By integration with the inherent advantages of ECL, bioanalysis based on CRA-enhanced ECL showed excellent performance such as ultrahigh sensitivity, wide dynamic range, low cost, simple instrumentation, and measurements in complex media. It has been extensively applied in various fields including clinical diagnosis, environmental monitoring, and food safety. Therefore, it is of great interest to present a systematic and critical review on the advances in ECL CRA. Herein, the recent progress on CRA and its applications in ECL bioanalysis are summarized by illustrating some representative work and a discussion of the future development trends of CRA ECL is offered.

Innovative Synthetic Procedures for Luminogens Showing Aggregation-Induced Emission

As a consequence of their intrinsic advantageous properties, luminogens that show aggregation-induced emission (AIEgens) have received increasing global interest for a wide range of applications. Whereas general synthetic methods towards AIEgens largely rely on tedious procedures and limited reaction types, various innovative synthetic methods have now emerged as complementary, and even alternative, strategies. In this Review, we systematically highlight advancements made in metal-catalyzed functionalization and metal-free-promoted pathways for the construction of AIEgens over the past five years, and briefly illustrate new perspectives in this area. The development of innovative synthetic procedures will enable the facile synthesis of AIEgens with great structural diversity for multifunctional applications.

Recent Advances on Fabrication of Polymeric Composites Based on Multicomponent Reactions for Bioimaging and Environmental Pollutant Removal

As the core of polymer chemistry, manufacture of functional polymers is one of research hotspots over the past several decades. Various polymers are developed for diverse applications due to their tunable structures and unique properties. However, traditional step-by-step preparation strategies inevitably involve some problems, such as separation, purification, and time-consuming. The multicomponent reactions (MCRs) are emerging as environmentally benign synthetic strategies to construct multifunctional polymers or composites with pendant groups and designed structures because of their features, such as efficient, fast, green, and atom economy. This mini review summarizes the latest advances about fabrication of multifunctional fluorescent polymers or adsorptive polymeric composites through different MCRs, including Kabachnik-Fields reaction, Biginelli reaction, mercaptoacetic acid locking imine reaction, Debus-Radziszewski reaction, and Mannich reaction. The potential applications of these polymeric composites in biomedical and environmental remediation are also highlighted. It is expected that this mini-review will promote the development preparation and applications of functional polymers through MCRs.

Aggregation-Induced Electrochemiluminescence of Conjugated Pdots Containing a Trace Ir(III) Complex: Insights into Structure-Property Relationships

An approach to the design of iridium(III)-contained polytetraphenylethene Pdots that could exhibit highly efficient electrochemiluminescence (ECL) was proposed. The relationships of ECL performance between the iridium complex-embedded and end-capped aggregation-induced emission (AIE) active Pdots in aqueous media were investigated for the first time. The iridium complexes with cyclometalated ligand 6-phenylphenanthridine (pphent) were incorporated into the copolymers by either embedding (P0, P2-P5) or end-capping (P1) into the backbone via an ancillary 2,2'-bipyridine (bpy) ligand. Subsequently, the corresponding Pdots of P0-P5 encapsulated with poly(styrene-co-maleicanhydride) could be obtained by the nanoprecipitation method. Compared to Pdots0, Pdots2-Pdots5 with (pphent)₂Ir(bpy) (M1) complex embedding, as the iridium complex content increases, ECL signals were decreased in the order of Pdots0 > Pdots2 > Pdots3 > Pdots4 > Pdots5; whereas among these Pdots of P0-P5, Pdots1 with M1 complex end-capping exhibited the highest ECL efficiency (relative to a Ru(bpy)₃²⁺ system of 18.9%) and 4.7-fold enhancement of the ECL signal compared to the parent Pdots of P0, which was mainly attributed to the good film conductivity of the completely conjugated architectures, thus prompting the intramolecular electron transfer. This work opened new avenues for designing highly efficient ECL emitters.

Benzosiloles with Crystallization-Induced Emission Enhancement of Electrochemiluminescence: Synthesis, Electrochemistry, and Crystallography

Crystallization-induced emission enhancement (CIEE) was demonstrated for the first time for electrochemilunimescence (ECL) with two new benzosiloles. Compared with their solution, the films of the two benzosiloles gave CIEE of 24 and 16 times. The mechanism of the CIEE-ECL was examined by spooling ECL spectroscopy, X-ray crystal structure analysis, photoluminescence, and DFT calculations. This CIEE-ECL system is a complement to the well-established aggregation-induced emission enhancement (AIEE) systems. Unique intermolecular interactions are noted in the crystalline chromophore. The first heterogeneous ECL system is established for organic compounds with highly hydrophobic properties.

A mass-amplifying electrochemiluminescence film (MAEF) for the visual detection of dopamine in aqueous media

A bright and metal-free mass-amplifying electrochemiluminescence film (MAEF) performing in aqueous media was reported for the first time. Systematic studies demonstrated that the film substrates have a remarkable influence on the electrochemiluminescence (ECL) performance. Gold substrates promote ECL reactions and the subsequent radiative decay process simultaneously, affording an unconventional 507-fold ECL enhancement. Such a gold-enhanced MAEF is opposite to ECL systems previously reported, in which the use of gold electrodes normally results in decreased ECL intensity due to passivation of the gold surface by oxide formation. More importantly, the ECL intensity of the MAEF is linearly amplified through facilely regulating luminogen loading. Morphological analysis reveals that the film consists of grass-like nanowires with a diameter of 57 nm, which facilitate electrical communication between the luminogen, electrode, and supporting electrolyte, giving rise to the mass-amplifying ECL. The bright ECL of the solid film in aqueous media can be readily observed by the naked eye, entirely different from visible ECL systems reported in which ruthenium complexes dissolved/dispersed in solution are used as the luminogens. The film is further utilized to detect dopamine (DA), an important biomolecule related to nervous diseases, in aqueous media, with a low detection limit of 3.3 × 10-16 M. Furthermore, a facile method based on grayscale analysis of ECL images (GAEI) of the film was developed for visual and ultrasensitive DA detection in aqueous media.