Metallacarboranes as Photoredox Catalysts in Water

Unveiling Non-Covalent Interactions in Novel Cooperative Photoredox Systems for Efficient Alkene Oxidation in Water

A new cooperative photoredox catalytic system, [RuII(trpy)(bpy)(H2O)][3,3'-Co(8,9,12-Cl3-1,2-C2B9H8)2]2, 5, has been synthesized and fully characterized for the first time. In this system, the photoredox catalyst [3,3'-Co(8,9,12-Cl3-1,2-C2B9H8)2]-[Cl6-1]-, a metallacarborane, and the oxidation catalyst [RuII(trpy)(bpy)(H2O)]2+, 2 are linked by non-covalent interactions. This compound, along with the one previously synthesized by us, [RuII(trpy)(bpy)(H2O)][(3,3'-Co(1,2-C2B9H11)2]2, 4, are the only examples of cooperative molecular photocatalysts in which the catalyst and photosensitizer are not linked by covalent bonds. Both cooperative systems have proven to be efficient photocatalysts for the oxidation of alkenes in water through Proton Coupled Electron Transfer processes (PCETs). Using 0.05 mol% of catalyst 4, total conversion values were achieved after 15 min with moderate selectivity for the corresponding epoxides, which decreases with reaction time, along with the TON values. However, with 0.005 mol% of catalyst, the conversion values are lower, but the selectivity and TON values are higher. This occurs simultaneously with an increase in the amount of the corresponding diol for most of the substrates studied. Photocatalyst 4 acts as a photocatalyst in both the epoxidation of alkenes and their hydroxylation in aqueous medium. The hybrid system 5 shows generally higher conversion values at low loads compared to those obtained with 4 for most of the substrates studied. However, the selectivity values for the corresponding epoxides are lower even after 15 min of reaction. This is likely due to the enhanced oxidizing capacity of CoIV in catalyst 5, resulting from the presence of more electron-withdrawing substituents on the metallacarborane platform.

Synthetic routes to carbon substituted cobalt bis(dicarbollide) alkyl halides and aromatic amines along with closely related irregular pathways

Carbon substituted cobalt bis(dicarbollide) alkyl halides [(1-X-(CH2)n-1,2-C2B9H10)(1,2-C2B9H11)-3,3'-Co]Me4N (X = Br, I; n = 1-3) are prepared in high yields (>90%) from their corresponding alcohols without side skeletal substitutions. These species offer access to the synthesis of aromatic cobalt bis(dicarbollide) amines, however only for particular terminal halogen substitution, the propylene pendant arm, and under appropriately controlled reaction conditions. Thus, the compounds substituted at cage carbon atoms with a propylene linker and terminal aromatic amine groups could be prepared. In other cases, numerous irregular reaction pathways occur, undoubtedly as a consequence of the bulky anionic boron cage in close proximity to the reaction site. Among them, an unusual intramolecular hydroboration forming rigidified carbon-to-boron bridged isomeric anions with an asymmetric structure that correspond to formulae [(1,8'-μ-C2H4)-(1,2-C2B9H10)(1',2'-C2B9H10)-3,3'-Co]- and [(1,7'-μ-C2H4)-(1,2-C2B9H10)(1',2'-C2B9H10)-3,3'-Co]- is described herein and the former isomer is structurally characterized. This product with a restrained geometry is widely accessible through nucleophile and/or thermally induced decomposition of (pseudo)halides attached to the cage via an ethylene linker. Surprisingly enough, also doubly bridged isomeric species [(1,8-μ-C2H4-1,2-C2B9H9)2-3,3'-Co]- and [(1,7-μ-C2H4-1,2-C2B9H9)2-3,3'-Co]- are available in good yield using these methods. Furthermore, other more typical side reactions are discussed, i.e. nucleophilic reactions of propyl halides with Me3N formed apparently by disproportionation of Me4N+ at higher temperatures or with pyridine used as a base.

Enhancing Photoredox Catalysis in Aqueous Environments: Ruthenium Aqua Complex Derivatization of Graphene Oxide and Graphite Rods for Efficient Visible-Light-Driven Hybrid Catalysts

A ruthenium aqua photoredox catalyst has been successfully heterogeneneized on graphene oxide (GO@trans-fac-3) and graphite rods (GR@trans-fac-3) for the first time and have proven to be sustainable and easily reusable systems for the photooxidation of alcohols in water, in mild and green conditions. We report here the synthesis and total characterization of two Ru(II)-polypyridyl complexes, the chlorido trans-fac-[RuCl(bpea-pyrene)(bpy)](PF6) (trans-fac-2) and the aqua trans-fac-[Ru(bpea-pyrene)(bpy)OH2](PF6)2 (trans-fac-3), both containing the N-tridentate, 1-[bis(pyridine-2-ylmethyl)amino]methylpyrene (bpea-pyrene), and 2,2'-bipyridine (bpy) ligands. In both complexes, only a single isomer, the trans-fac, has been detected in solution and in the solid state. The aqua complex trans-fac-3 displays bielectronic redox processes in water, assigned to the Ru(IV/II) couple. The trans-fac-3 complex has been heterogenized on different types of supports, (i) on graphene oxide (GO) through π-stacking interactions between the pyrene group of the bpea-pyrene ligand and the GO and (ii) both on glassy carbon electrodes (GC) and on graphite rods (GR) through oxidative electropolymerization of the pyrene group, which yield stable heterogeneous photoredox catalysts. GO@trans-fac-3- and GR/poly trans-fac-3-modified electrodes were fully characterized by spectroscopic and electrochemical methods. Trans-fac-3 and GO@trans-fac-3 photocatalysts (without a photosensitizer) showed good catalytic efficiency in the photooxidation of alcohols in water under mild conditions and using visible light. Both photocatalysts display high selectivity values (>99%) even for primary alcohols in accordance with the presence of two-electron transfer processes (2e-/2H+). GO@trans-fac-3 keeps intact its homogeneous catalytic properties but shows an enhancement in yields. GO@trans-fac-3 can be easily recycled by filtration and reused for up to five runs without any significant loss of catalytic activity. Graphite rods (GR@trans-fac-3) were also evaluated as heterogeneous photoredox catalysts showing high turnover numbers (TON) and selectivity values.

Nickelacarborane-Supported Bis-N-heterocyclic Carbenes

Metallacarboranes have attracted significant attention due to their unique properties. Considerable efforts have been made on the reactions around the metal centers or the metal ion itself, while transformations of functional groups of the metallacarboranes have been much less explored. We presented here the formation of imidazolium-functionalized nickelacarboranes (2), their subsequent conversion to nickelacarborane-supported N-heterocyclic carbenoids (NHCs, 3), and the reactivities of 3 toward Au(PPh₃)Cl and Se powder, which resulted in the formation of bis-gold carbene complexes (4) and NHC selenium adducts (5). Cyclic voltammetry of 4 shows two reversible peaks, corresponding to the interconversion transformations Ni^II ↔ Ni^III and Ni^III ↔ Ni^IV. Theoretical calculations demonstrated relatively high-lying lone-pair orbitals, weak B-H···H-C interactions between the BH units and the methyl group, and weak B-H···π interactions between the BH groups and the vacant p-orbital of the carbene.

New Aspects of Ruthenium-Mediated Polyhedral Contraction of Monocarbollides

It has been shown that the interaction of tris(triphenylphosphine)ruthenium dichloride RuCl2(PPh3)3 (1) with 10-vertex monocarborane [6-Ph-nido-6-CB9H11]−[Et4N]+ (2) under mild thermolysis conditions is not selective due to the undesired coordination of ruthenium to a phenyl substituent in the carborane and phosphine ligands, giving the series of new classical and non-classical metallacarborane complexes. In contrast, the reaction of 1 and monocarborane [arachno-6-CB9H14]−[Et4N]+ (3) proceeds more selectively with the formation of the only one product, a isocloso-structured metallacarborane. The structures of two ruthenacarboranes were resolved by X-ray diffraction.

Site-Selective Functionalization of Carboranes at the Electron-Rich Boron Vertex: Photocatalytic B-C Coupling via a Carboranyl Cage Radical

Functionalization of carboranes in a vertex-specific manner is a perennial challenge. Here, we report a photocatalytic B-C coupling for the selective functionalization of carboranes at the boron site which is most distal to carbon. This reaction was achieved by the photo-induced decarboxylation of carborane carboxylic acids to generate boron vertex-centered carboranyl radicals. Theoretical calculations also demonstrate that the reaction more easily occurs at the boron site bearing higher electron density owing to the lower energy barrier for a single-electron transfer to generate a carboranyl radical. By using this strategy, a number of functionalized carboranes could be accessed through alkylation, alkenylation, and heteroarylation under mild conditions. Moreover, both a highly efficient blue emitter with a solid-state luminous efficiency of 42 % and a drug candidate for boron neutron capture therapy (BNCT) containing targeting and fluorine units were obtained.

Visible-Light Photoredox Catalysis in Water

The use of water in organic synthesis draws attention to its green chemistry features and its unique ability to unveil unconventional reactivities. Herein, literature about the use of water as a reaction medium under visible-light photocatalytic conditions is summarized in order to highlight challenges and opportunities. Accordingly, this Synopsis has been divided into four different sections focused on (1) the unconventional role of water in photocatalytic reactions, (2) in-/on-water reactions, (3) water-soluble photocatalysts, and (4) photomicellar catalytic systems.

Aromaticity and Extrusion of Benzenoids Linked to [o-COSAN]- : Clar Has the Answer

Benzene and pyrene can be synthetically linked to [o-COSAN]^- keeping their aromaticity. In contrast, naphthalene and anthracene are extruded in the same reaction. We have proven that extrusion is only favorable if the number of Clar's π-sextets remains constant. Thus, Clar has the answer to whether an attached polycyclic aromatic hydrocarbon to [o-COSAN]^- is extruded or not.

Water soluble organometallic small molecules as promising antibacterial agents: synthesis, physical-chemical properties and biological evaluation to tackle bacterial infections

The Na[3,3'-Fe(8-I-1,2-C₂B₉H₁₀)₂] and Na[2,2'-M(1,7-C₂B₉H₁₁)] (M = Co³⁺, Fe³⁺) small molecules are synthesized and the X-ray structures of [(H₃O)(H₂O)₅][2,2'-Co(1,7-C₂B₉H₁₁)₂] and [Cs(MeCN)][8,8'-I₂-Fe(1,2 C₂B₉H₁₀)₂], both displaying a transoid conformation of the [M(C₂B₉)₂]^- framework, are reported. Importantly, the supramolecular structure of [(H₃O)(H₂O)₅][2,2'-Co(1,7-C₂B₉H₁₁)₂] presents 2D layers leading to a lamellar arrangement of the anions while the cation layers form polymeric water rings made of six- and four-membered rings of water molecules connected via OH⋯H hydrogen bonds; B-H⋯O contacts connect the cationic and anionic layers. Herein, we highlight the influence of the ligand isomers (ortho-/meta-), the metal effect (Co³⁺/Fe³⁺) on the same isomer, as well as the influence of the presence of the iodine atoms on the physical-chemical and biological properties of these molecules as antimicrobial agents to tackle antibiotic-resistant bacteria, which were tested with four Gram-positive bacteria, five Gram-negative bacteria, and three Candida albicans strains that have been responsible for human infections. We have demonstrated an antimicrobial effect against Candida species (MIC of 2 and 3 nM for Na[3,3'-Co(8-I-1,2-C₂B₉H₁₀)₂] and Na[2,2'-Co(1,7-C₂B₉H₁₁)₂], respectively), and against Gram-positive and Gram-negative bacteria, including multiresistant MRSA strains (MIC of 6 nM for Na[3,3'-Co(8-I-1,2-C₂B₉H₁₀)₂]). The selectivity index for antimicrobial activity of Na[3,3'-Co(1,2-C₂B₉H₁₁)₂] and Na[3,3'-Co(8-I-1,2-C₂B₉H₁₀)₂] compounds is very high (165 and 1180, respectively), which reveals that these small anionic metallacarborane molecules may be useful to tackle antibiotic-resistant bacteria. Moreover, we have demonstrated that the outer membrane of Gram-negative bacteria constitutes an impermeable barrier for the majority of these compounds. Nonetheless, the addition of two iodine groups in the structure of the parent Na[3,3'-Co(1,2-C₂B₉H₁₁)₂] had an improved effect (3-7 times) against Gram-negative bacteria. Possibly the changes in their physical-chemical properties make the meta-isomers and the ortho-di-iodinated small molecules more permeable for crossing this barrier. It should be emphasized that the most active metallabis(dicarbollide) small molecules are both transoid conformers in contrast to the ortho- [3,3'-Co(1,2-C₂B₉H₁₁)₂]^- that is cisoid. The fact that these small molecules cross the mammalian membrane and have antimicrobial properties but low toxicity for mammalian cells (high selectivity index, SI) represents a promising tool to treat infectious intracellular bacteria. Since there is an urgent need for antibiotic discovery and development, this study represents a relevant advance in the field.

Molecular and supported ruthenium complexes as photoredox oxidation catalysts in water

A molecular Ru-OH2 complex supported on rGO through non-covalent interactions performs as a photoredox oxidation catalyst in water, without an additional photosensitizer.

Light-Induced On/Off Switching of the Surfactant Character of the o-Cobaltabis(dicarbollide) Anion with No Covalent Bond Alteration

Cobaltabis(dicarbollide) anion ([o‐COSAN]⁻) is a well‐known metallacarborane with multiple applications in a variety of fields. In aqueous solution, the cisoid rotamer is the most stable disposition in the ground state. The present work provides theoretical evidence on the possibility to photoinduce the rotation from the cisoid to the transoid rotamer, a conversion that can be reverted when the ground state is repopulated. The non‐radiative decay mechanisms proposed in this work are coherent with the lack of fluorescence observed in 3D fluorescence mapping experiments performed on [o‐COSAN]⁻ and its derivatives. This phenomenon induced by light has the potential to destruct the vesicles and micelles cisoid [o‐COSAN]⁻ typically forms in aqueous solution, which could lead to promising applications, particularly in the field of nanomedicine.

Synthesis and Catalytic Properties of Novel Ruthenacarboranes Based on nido-[5-Me-7,8-C2B9H10]2− and nido-[5,6-Me2-7,8-C2B9H9]2− Dicarbollide Ligands

The effect of methyl substituents in the lower belt of dicarbollide ligands on the redox potential of ruthenacarboranes based thereof, as well as the ability of the metallacarboranes obtained to catalyze radical polymerization with atom transfer were studied. For this purpose, a new approach to the synthesis of closo-ruthenacarboranes based on substituted dicarbollide ligands was developed and six new complexes 3,3-(Ph2P(CH2)4PPh2)-3-H-3-Cl-9-Me-12-X-closo-3,1,2-RuC2B9H9, 3,3,8-(Ph2P(CH2)4PPh-μ-(C6H4-o))-3-Cl-9-Me-12-X-closo-3,1,2-RuC2B9H8 and 3,3,4,8-(Ph2P(CH2)4P-μ-(C6H4-o)2)-3-Cl-9-Me-9-X-closo-3,1,2-RuC2B9H7 (X = H, Me) were synthetized and characterized by single crystal X-ray diffraction, NMR and ESR spectroscopy and MALDI TOF mass-spectrometry. Comparison of the values of the redox potentials of the synthesized ruthenium complexes in 1,2-dichloroethane with the values previously found for the corresponding ruthenacarboranes based on the parent dicarbollide anion showed that the introduction of methyl substituents into the carborane cage led to a decrease in the redox potentials of the complexes, which made them more preferable catalysts for ATRP. Test experiments on the polymerization of MMA showed that the synthesized ruthenacarboranes were effective catalysts for ATRP, the most active being the complex with two methyl groups and two ortho-phenylenecycloboronated fragments.

Photoredox-Catalyzed Reduction of Halogenated Arenes in Water by Amphiphilic Polymeric Nanoparticles

The use of organic photoredox catalysts provides new ways to perform metal-free reactions controlled by light. While these reactions are usually performed in organic media, the application of these catalysts at ambient temperatures in aqueous media is of considerable interest. We here compare the activity of two established organic photoredox catalysts, one based on 10-phenylphenothiazine (PTH) and one based on an acridinium dye (ACR), in the light-activated dehalogenation of aromatic halides in pure water. Both PTH and ACR were covalently attached to amphiphilic polymers that are designed to form polymeric nanoparticles with hydrodynamic diameter DH ranging between 5 and 11 nm in aqueous solution. Due to the hydrophobic side groups that furnish the interior of these nanoparticles after hydrophobic collapse, water-insoluble reagents can gather within the nanoparticles at high local catalyst and substrate concentrations. We evaluated six different amphiphilic polymeric nanoparticles to assess the effect of polymer length, catalyst loading and nature of the catalyst (PTH or ACR) in the dechlorination of a range of aromatic chlorides. In addition, we investigate the selectivity of both catalysts for reducing different types of aryl-halogen bonds present in one molecule, as well as the activity of the catalysts for C-C cross-coupling reactions. We find that all polymer-based catalysts show high activity for the reduction of electron-poor aromatic compounds. For electron-rich compounds, the ACR-based catalyst is more effective than PTH. In the selective dehalogenation reactions, the order of bond stability is C-Cl > C-Br > C-I irrespective of the catalyst applied. All in all, both water-compatible systems show good activity in water, with ACR-based catalysts being slightly more efficient for more resilient substrates.

Free three-dimensional carborane carbanions

Carbon atom functionalization via generation of carbanions is the cornerstone of carborane chemistry. In this work, we report the synthesis and structural characterization of free ortho-carboranyl [C2B10H11]-, a three-dimensional inorganic analog of the elusive phenyl anion that features a "naked" carbanion center. The first example of a stable, discrete C(H)-deprotonated carborane anion was isolated as a completely separated ion pair with a crown ether-encapsulated potassium cation. An analogous approach led to the isolation and structural characterization of a doubly deprotonated 1,1'-bis(o-carborane) anion [C2B10H10]2 2-, which is the first example of a discrete molecular dicarbanion. These reactive carbanions are key intermediates in carbon vertex chemistry of carborane clusters.

Aqueous Persistent Noncovalent Ion-Pair Cooperative Coupling in a Ruthenium Cobaltabis(dicarbollide) System as a Highly Efficient Photoredox Oxidation Catalyst

An original cooperative photoredox catalytic system, [Ru^II(trpy)(bpy)(H₂O)][3,3'-Co(1,2-C₂B₉H₁₁)₂]₂ (C4; trpy = terpyridine and bpy = bipyridine), has been synthesized. In this system, the photoredox metallacarborane catalyst [3,3'-Co(1,2-C₂B₉H₁₁)₂]^- ([1]^-) and the oxidation catalyst [Ru^II(trpy)(bpy)(H₂O)]²⁺ (C2') are linked by noncovalent interactions and not through covalent bonds. The noncovalent interactions to a large degree persist even after water dissolution. This represents a step ahead in cooperativity avoiding costly covalent bonding. Recrystallization of C4 in acetonitrile leads to the substitution of water by the acetonitrile ligand and the formation of complex [Ru^II(trpy)(bpy)(CH₃CN)][3,3'-Co(1,2-C₂B₉H₁₁)₂]₂ (C5), structurally characterized. A significant electronic coupling between C2' and [1]^- was first sensed in electrochemical studies in water. The Co^IV/III redox couple in water differed by 170 mV when [1]^- had Na⁺ as a cation versus when the ruthenium complex was the cation. This cooperative system leads to an efficient catalyst for the photooxidation of alcohols in water, through a proton-coupled electron-transfer process. We have highlighted the capacity of C4 to perform as an excellent cooperative photoredox catalyst in the photooxidation of alcohols in water at room temperature under UV irradiation, using 0.005 mol % catalyst. A high turnover number (TON = 20000) has been observed. The hybrid system C4 displays a better catalytic performance than the separated mixtures of C2' and Na[1], with the same concentrations and ratios of Ru/Co, proving the history relevance of the photocatalyst. Cooperative systems with this type of interaction have not been described and represent a step forward in getting cooperativity avoiding costly covalent bonding. A possible mechanism has been proposed.

Preparing (Metalla)carboranes for Nanomedicine

"There's plenty of room at the bottom" (Richard Feynman, 1959): an invitation for (metalla)carboranes to enter the (new) field of nanomedicine. For two decades, the number of publications on boron cluster compounds designed for potential applications in medicine has been constantly increasing. Hundreds of compounds have been screened in vitro or in vivo for a variety of biological activities (chemotherapeutics, radiotherapeutics, antiviral, etc.), and some have shown rather promising potential for further development. However, until now, no boron cluster compounds have made it to the clinic, and even clinical trials have been very sparse. This review introduces a new perspective in the field of medicinal boron chemistry, namely that boron-based drugs should be regarded as nanomedicine platforms, due to their peculiar self-assembly behaviour in aqueous solutions, and treated as such. Examples for boron-based 12- and 11-vertex clusters and appropriate comparative studies from medicinal (in)organic chemistry and nanomedicine, highlighting similarities, differences and gaps in physicochemical and biological characterisation methods, are provided to encourage medicinal boron chemists to fill in the gaps between chemistry laboratory and real applications in living systems by employing bioanalytical and biophysical methods for characterising and controlling the aggregation behaviour of the clusters in solution.

Photoinduced Dearomatizing Three-Component Coupling of Arylphosphines, Alkenes, and Water

A unique photoinduced reaction that couples a triarylphosphine, an alkene, and water to produce 2-(cyclohexa-2,5-dienyl)ethylphosphine oxide is reported herein. The alkene inserts into a C(aryl)-P bond of the arylphosphine, the aryl ring is dearomatized into the cyclohexadienyl ring, and the phosphorus is oxidized. The three components are all readily available, and their intermolecular coupling significantly increases molecular complexity. The products formed are applicable to the Wittig olefination.

Reversibly Switchable Fluorescent Molecular Systems Based on Metallacarborane-Perylenediimide Conjugates

Icosahedral metallacarboranes are θ-shaped anionic molecules in which two icosahedra share one vertex that is a metal center. The most remarkable of these compounds is the anionic cobalt-based metallacarborane [Co(C₂ B₉ H₁₁ )₂ ]^- , whose oxidation-reduction processes occur via an outer sphere electron process. This, along with its low density negative charge, makes [Co(C₂ B₉ H₁₁ )₂ ]^- very appealing to participate in electron-transfer processes. In this work, [Co(C₂ B₉ H₁₁ )₂ ]^- is tethered to a perylenediimide dye to produce the first examples of switchable luminescent molecules and materials based on metallacarboranes. In particular, the electronic communication of [Co(C₂ B₉ H₁₁ )₂ ]^- with the appended chromophore unit in these compounds can be regulated upon application of redox stimuli, which allows the reversible modulation of the emitted fluorescence. As such, they behave as electrochemically-controlled fluorescent molecular switches in solution, which surpass the performance of previous systems based on conjugates of perylendiimides with ferrocene. Remarkably, they can form gels by treatment with appropriate mixtures of organic solvents, which result from the self-assembly of the cobaltabisdicarbollide-perylendiimide conjugates into 1D nanostructures. The interplay between dye π-stacking and metallacarborane electronic and steric interactions ultimately governs the supramolecular arrangement in these materials, which for one of the compounds prepared allows preserving the luminescent behavior in the gel state.

Noncovalently Linked Metallacarboranes on Functionalized Magnetic Nanoparticles as Highly Efficient, Robust, and Reusable Photocatalysts in Aqueous Medium

A successful homogeneous photoredox catalyst has been fruitfully heterogenized on magnetic nanoparticles (MNPs) coated with a silica layer, keeping intact its homogeneous catalytic properties but gaining others due to the easy magnetic separation and recyclability. The amine-terminated magnetic silica nanoparticles linked noncovalently to H[3,3'-Co(1,2-C₂B₉H₁₁)₂]^- (H[1]), termed MSNPs-NH₂@H[1], are highly stable and do not produce any leakage of the photoredox catalyst H[1] in water. The magnetite MNPs were coated with SiO₂ to provide colloidal stability and silanol groups to be tethered to amine-containing units. These were the MSNPs-NH₂ on which was anchored, in water, the cobaltabis(dicarbollide) complex H[1] to obtain MSNPs-NH₂@H[1]. Both MSNPs-NH₂ and MSNPs-NH₂@H[1] were evaluated to study the morphology, characterization, and colloidal stability of the MNPs produced. The heterogeneous MSNP-NH₂@H[1] system was studied for the photooxidation of alcohols, such as 1-phenylethanol, 1-hexanol, 1,6-hexanediol, or cyclohexanol among others, using catalyst loads of 0.1 and 0.01 mol %. Surfactants were introduced to prevent the aggregation of MNPs, and cetyl trimethyl ammonium chloride was chosen as a surfactant. This provided adequate stability, without hampering quick magnetic separation. The results proved that the catalysis could be speeded up if aggregation was prevented. The recyclability of the catalytic system was demonstrated by performing 12 runs of the MSNPs-NH₂@H[1] system, each one without loss of selectivity and yield. The cobaltabis(dicarbollide) catalyst supported on silica-coated magnetite nanoparticles has proven to be a robust, efficient, and easily reusable system for the photooxidation of alcohols in water, resulting in a green and sustainable heterogeneous catalytic system.

Highlights on the Binding of Cobalta-Bis-(Dicarbollide) with Glucose Units

Metalla-bis-dicarbollides, such as the cobalta-bis-dicarbollide (COSAN) anion [Co(C₂ B₉ H₁₁ )₂ ]^- , have attracted much attention in biology but a deep understanding of their interactions with cell components is still missing. For this purpose, we studied the interactions of COSAN with the glucose moiety, which is ubiquitous at biological interfaces. Octyl-glucopyranoside surfactant (C8G1) was chosen as a model as it self-assembles in water and creates a hydrated glucose-covered interface. At low COSAN content and below the critical micellar concentration (CMC) of C8G1, COSAN binds to C8G1 monomers through the hydrophobic effect. Above the CMC of C8G1, COSAN adsorbs onto C8G1 micelles through the superchaotropic effect. At high COSAN concentrations, COSAN disrupts C8G1 micelles and the assemblies become similar to COSAN micelles but with a small amount of solubilized C8G1. Therefore, COSAN binds in a versatile way to C8G1 through either the hydrophobic or superchaotropic effect depending on their relative concentrations.