Simultaneous Enantiomeric Determination of Propranolol, Metoprolol, Pindolol, and Atenolol in Natural Waters by HPLC on New Polysaccharide-Based Stationary Phase using a Highly Selective Molecularly Imprinted Polymer Extraction

Magnetic Field Tuning Ionic Current Generated by Chiromagnetic Nanofilms

The realization of chiral magnetic effect by macroscopically manipulating quantum states of chiral matter under the magnetic field makes a future for information transmission, memory storage, magnetic cooling materials etc., while the microscopic tiny signal differences of at the interface electrons are laborious to be discerned. Here, chiromagnetic iron oxide (Fe₃O₄) nanofilms were successfully prepared by modulating the magnetic and electrical transition dipoles and combined with confined ion transport, enabling magnetic field-tunable ionic currents with markedly ∼7.91-fold higher for l-tartaric acid (TA)-modified Fe₃O₄ nanofilms than that by d-TA. The apparent amplification results from the charge redistribution at the ferromagnetic-organic interface under the influence of the chiral magnetic effect, resulting in a significant potential difference across the nanofilms that drive ion transport in the confined environment. This strategy, on the one hand, makes it possible to efficiently characterize the electronic microimbalance state in chiral substances induced by the magnetic field and, on the other hand realizes the discrimination and highly sensitive quantitative detection of chiral drug enantiomers, which give insights for the in-depth understanding of chiral magnetic effects and efficient enantiomeric recognition.

An Update on the Use of Molecularly Imprinted Polymers in Beta-Blocker Drug Analysis as a Selective Separation Method in Biological and Environmental Analysis

Beta-blockers are antihypertensive drugs and can be abused by athletes in some sport competitions; it is therefore necessary to monitor beta-blocker levels in biological samples. In addition, beta-blocker levels in environmental samples need to be monitored to determine whether there are contaminants from the activities of the pharmaceutical industry. Several extraction methods have been developed to separate beta-blocker drugs in a sample, one of which is molecularly imprinted polymer solid-phase extraction (MIP-SPE). MIPs have some advantages, including good selectivity, high affinity, ease of synthesis, and low cost. This review provides an overview of the polymerization methods for synthesizing MIPs of beta-blocker groups. The methods that are still widely used to synthesize MIPs for beta-blockers are the bulk polymerization method and the precipitation polymerization method. MIPs for beta-blockers still need further development, especially since many types of beta-blockers have not been used as templates in the MIP synthesis process and modification of the MIP sorbent is required, to obtain high throughput analysis.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Dispersive solid-phase extraction of racemic drugs using chiral ionic liquid-metal-organic framework composite sorbent

Nowadays, enantioseparation of racemic pharmaceuticals in preparations is a prime concern by drug authorities across the globe. In the present work, it was attempted to develop novel enantioselective extraction method for five clinically used drugs (atenolol, propranolol, metoprolol, racecadotril, and raceanisodamine in their tablets) as racemates. The enantioselective solid-liquid extraction of these racemic drugs was carried out successfully by the use of chiral ionic liquid (CIL) in combination with a metal organic framework (MOF) for the first time. The composite CIL@MOF was synthesized from tropine based chiral ionic liquids with L-proline anion ([C_nTr][L-Pro], n=3-6) and HKUST-1 type MOF, which was comprehensively characterized before being used as sorbent for enantioselective dispersive solid-liquid extraction. Preliminary selection of appropriate CIL was carried out on thin layer chromatography (TLC); under the joint participation of copper ion in the developing reagent, [C₃Tr][L-Pro] ionic liquid showed better resolution performance with ΔR_f value of 0.35 between the enantiomers was obtained for racemic atenolol. Moreover, the effect of copper salt dosage, amount of CIL, soli-liquid ratio and extraction time were investigated. The optimal conditions were obtained after thorough investigations; i.e. sample solution: ethanol, elution solvent: methanol, solid-liquid ratio: 12.5 mg:50 mL, amount of copper salt: 8 mg L^-1, amount of impregnated CIL: 30% and extraction time of 30 min. As a result, enantiomeric excess values are 90.4%, 95%, 92%, 81.6% and 83.2% for atenolol, propranolol, metoprolol, racecadotril and raceanisodamine, respectively. The developed enantioselective method was validated following ICH guidelines and it was proved to be simple, effective and enantioselective way for separation of racemic pharmaceuticals with similar behaviors.

Shedding light on mechanisms leading to convex-upward van Deemter curves on a cellulose tris(4-chloro-3-methylphenylcarbamate)-based chiral stationary phase

An unusual convex-upward van Deemter curve was observed for the more retained enantiomer of a chiral sulfoxide (2-(benzylsulfinyl)benzamide) on a cellulose tris(4-chloro-3-methylphenylcarbamate)-based chiral stationary phase (CSP), prepared on silica particles of 1000 Å pore size. In contrast, the firstly eluted enantiomer of the same molecule exhibited the traditional convex-downward van Deemter curve. A detailed kinetic and thermodynamic investigation has revealed that this unusual phenomenon, which however has already been observed in chiral chromatography, originates when the adsorption of the compound is very strong and the solid-phase diffusion negligible. Experimentally, the intraparticle diffusion of the more retained enantiomer of the sulfoxide was found to be one order of magnitude smaller than that of the first eluted one. Overall, this translates into very little longitudinal diffusion (b-term of van Deemter curve) accompanied by high solid-liquid mass transfer resistance (c-term). Finally the comparison with another, differently-substituted chiral sulfoxide (whose enantiomers both exhibit traditional van Deemter curve behavior) has allowed to correlate these findings to the specific characteristics of the molecule.

Application of molecularly imprinted polymers in the anti-doping field: sample purification and compound analysis

The problem posed by anti-doping requirements is one of the great analytical challenges; multiple compound detection at low ng ml-1 levels from complex samples, with requirements for exceptional confidence in results. This review surveys the design, synthesis and application of molecularly imprinted polymers (MIPs) in this field, focusing on the templating of androgenous anabolic steroids (AASs), as the most commonly abused substances, but also other WADA prohibited substances. Commentary on the application of these materials in detection, clean-up and sensing is offered, alongside views on the future of imprinting in this field.

Molecularly imprinted polymers for the detection of illegal drugs and additives: a review

This review (with 154 refs.) describes the current status of using molecularly imprinted polymers in the extraction and quantitation of illicit drugs and additives. The review starts with an introduction into some synthesis methods (lump MIPs, spherical MIPs, surface imprinting) of MIPs using illicit drugs and additives as templates. The next section covers applications, with subsections on the detection of illegal additives in food, of doping in sports, and of illicit addictive drugs. A particular focus is directed towards current limitations and challenges, on the optimization of methods for preparation of MIPs, their applicability to aqueous samples, the leakage of template molecules, and the identification of the best balance between adsorption capacity and selectivity factor. At last, the need for convincing characterization methods, the lack of uniform parameters for defining selectivity, and the merits and demerits of MIPs prepared using nanomaterials are addressed. Strategies are suggested to solve existing problems, and future developments are discussed with respect to a more widespread use in relevant fields. Graphical abstract This review gives a comprehensive overview of the advances made in molecularly imprinting of polymers for use in the extraction and quantitation of illicit drugs and additives. Methods for syntheses, highlighted applications, limitations and current challenges are specifically addressed.

Chiral Drug Analysis in Forensic Chemistry: An Overview

Many substances of forensic interest are chiral and available either as racemates or pure enantiomers. Application of chiral analysis in biological samples can be useful for the determination of legal or illicit drugs consumption or interpretation of unexpected toxicological effects. Chiral substances can also be found in environmental samples and revealed to be useful for determination of community drug usage (sewage epidemiology), identification of illicit drug manufacturing locations, illegal discharge of sewage and in environmental risk assessment. Thus, the purpose of this paper is to provide an overview of the application of chiral analysis in biological and environmental samples and their relevance in the forensic field. Most frequently analytical methods used to quantify the enantiomers are liquid and gas chromatography using both indirect, with enantiomerically pure derivatizing reagents, and direct methods recurring to chiral stationary phases.

Approaches for enantioselective resolution of pharmaceuticals by miniaturised separation techniques with new chiral phases based on nanoparticles and monolithis

This article discusses new developments in the preparation of nanoparticles and monoliths with emphasis upon their application as the stationary and pseudo-stationary phases for miniaturised liquid phase separation techniques, which have occurred in the last 10 years (from 2006 to the actuality). References included in this review represent current trends and state of the art in the application of these materials to the analysis, by EKC, CEC and miniaturised chromatography, of chiral compounds with environmental interest such as pharmaceuticals. Due to their extraordinary properties, columns prepared with these new chiral stationary or pseudo-stationary phases, based on materials such as gold nanoparticles, metal-organic frameworks, ordered mesoporous silicas, carbonaceous materials, polymeric-based and silica-based monoliths or molecularly imprinted materials, can usually show some improvements in the separation selectivity, column efficiency and chemical stability in comparison with conventional chiral columns available commercially.

Cardiovascular drug determination in bioanalysis: an update

The great impact of cardiovascular diseases in human health has led to the development of a huge number of drugs and therapies to improve the treatment of these diseases. Cardiovascular drug analysis in biological fluids constitutes an important challenge for analytical scientists. There is a clear need for reliable methods to carry out both qualitative and quantitative analysis in a short time of analysis. Different problems such as drug monitoring, analysis of metabolites, study of drugs interactions, drugs residues or degradation products, chiral separation, and screening and confirmation of drugs of abuse in doping control must be solved. New trends in sample preparation, instrumental and column technology advances in LC and innovations in MS are described in this work.

Chemometric-assisted spectrophotometric methods and high performance liquid chromatography for simultaneous determination of seven β-blockers in their pharmaceutical products: a comparative study

Chemometric-assisted spectrophotometric methods and high performance liquid chromatography (HPLC) were developed for the simultaneous determination of the seven most commonly prescribed β-blockers (atenolol, sotalol, metoprolol, bisoprolol, propranolol, carvedilol and nebivolol). Principal component regression PCR, partial least square PLS and PLS with previous wavelength selection by genetic algorithm (GA-PLS) were used for chemometric analysis of spectral data of these drugs. The compositions of the mixtures used in the calibration set were varied to cover the linearity ranges 0.7-10 μg ml(-1) for AT, 1-15 μg ml(-1) for ST, 1-15 μg ml(-1) for MT, 0.3-5 μg ml(-1) for BS, 0.1-3 μg ml(-1) for PR, 0.1-3 μg ml(-1) for CV and 0.7-5 μg ml(-1) for NB. The analytical performances of these chemometric methods were characterized by relative prediction errors and were compared with each other. GA-PLS showed superiority over the other applied multivariate methods due to the wavelength selection. A new gradient HPLC method had been developed using statistical experimental design. Optimum conditions of separation were determined with the aid of central composite design. The developed HPLC method was found to be linear in the range of 0.2-20 μg ml(-1) for AT, 0.2-20 μg ml(-1) for ST, 0.1-15 μg ml(-1) for MT, 0.1-15 μg ml(-1) for BS, 0.1-13 μg ml(-1) for PR, 0.1-13 μg ml(-1) for CV and 0.4-20 μg ml(-1) for NB. No significant difference between the results of the proposed GA-PLS and HPLC methods with respect to accuracy and precision. The proposed analytical methods did not show any interference of the excipients when applied to pharmaceutical products.