On the Understandings of Dielectric Constant and Its Impacts on the Photovoltaic Efficiency in Organic Solar Cells

Hydrostatic pressure-induced transformations and multifunctional properties of Francium-based halide perovskite FrCaCl3: Insights from first-principles calculations

Under varying hydrostatic pressures ranging from 0 to 150 GPa, first-principles calculations were conducted to investigate the structural, electronic, bonding, optical, elastic, and mechanical characteristics of the Lead (Pb)-free halide perovskite FrCaCl3 using both the GGA and hybrid HSE06 parameterized density functional theory (DFT). Since the FrCaCl3 cubic perovskite has not yet been synthesized experimentally, its structural and thermodynamic stabilities are confirmed by the Goldschmidt tolerance factor, the octahedral factor, and the formation energy. The induction of pressure has caused a simultaneous decrease in both the lattice parameters and the electronic band gap. Applying the hybrid HSE06 potential refines the accuracy of the band gap, with values decreasing from 5.705 to 2.618 eV from 0 to 150 GPa pressure, suggesting improved optoelectronic attributes. Employing pressure facilitates the formation of stronger chemical bonds characterized by reduced bond lengths. The investigation of optical functions demonstrates that with increased pressure ranging to 150 GPa, the optical conductivity along with the absorption coefficient is oriented towards the low-energy region. The FrCaCl3 perovskite has the prospect to be used in X-ray imaging and other fields of nuclear medicine and diagnostics as it contains the radioactive element Francium (Fr). Additionally, it is found via the study of mechanical characteristics that FrCaCl3 is mechanically stable under various applied pressure, and adding pressure makes it more ductile as well as more anisotropic.

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Octupole moment driven free charge generation in partially chlorinated subphthalocyanine for planar heterojunction organic photodetectors

In this study, high-performance organic photodetectors are presented which utilize a pristine chlorinated subphthalocyanine photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the chlorinated subphthalocyanine layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by chlorinated subphthalocyanine high octupole moment (-80 DÅ2), which generates a 200 meV shift in molecular energetics. Increasing the thickness of chlorinated subphthalocyanine leads to faster response time, correlated with a decrease in trap density. Notably, photodetectors with a 50 nm thick chlorinated subphthalocyanine photoactive layer exhibit detectivities approaching 1013 Jones, with a dark current below 10-7 A cm-2 up to -5 V. Based on these findings, we conclude that high octupole moment molecular semiconductors are promising materials for high-performance organic photodetectors employing single-component photoactive layer.

Spectrally Resolved Exciton Polarizability for Understanding Charge Generation in Organic Bulk Hetero-Junction Diodes

Despite decades of research, the dominant charge generation mechanism in organic bulk heterojunction (BHJ) devices is not completely understood. While the local dielectric environments of the photoexcited molecules are important for exciton dissociation, conventional characterizations cannot separately measure the polarizability of electron-donor and electron-acceptor, respectively, in their blends, making it difficult to decipher the spectrally different charge generation efficiencies in organic BHJ devices. Here, by spectrally resolved electroabsorption spectroscopy, we report extraction of the excited state polarizability for individual donors and acceptors in a series of organic blend films. Regardless of the donor and acceptor, we discovered that larger exciton polarizability is linked to larger π-π coherence length and faster charge transfer across the heterojunction, which fundamentally explains the origin of the higher charge generation efficiency near 100% in the BHJ photodiodes. We also show that the molecular packing of the donor and acceptor influence each other, resulting in a synergetic enhancement in the exciton polarizability.

Pressure-driven modification of optoelectronic features of ACaCl3 (A = Cs, Tl) for device applications

Intending to advance the use of halide-perovskites in technological applications, in this research, we investigate the structural, electronic, optical, and mechanical behavior of metal-halide perovskites ACaCl3 (A = Cs, Tl) through first-principle analysis and assess their potential applications. Due to the applied hydrostatic pressure, the interaction between constituent atoms increases, thereby causing the lattice parameter to decrease. The band structure reveals that band gap nature transits from indirect to direct at elevated pressure. Moreover, at high pressure, the electronic band structure shows a notable band gap contraction from the insulator (>5.0 eV) to the semiconductor region, which makes them promising for electronic applications. The charge density map explores the ionic and covalent characteristics of Cs/Tl-Cl and Ca-Cl under pressured and unpressurized environments. Induced pressure enhances the optical conductivity as well as the optical absorption that moves toward the low-energy region (red shift), making ACaCl3 (A = Cs, Tl) advantageous for optoelectronic applications. Additionally, this study reveals that the mechanical properties of ductility and anisotropy were found to be improved at higher pressures than in ambient conditions. Overall, this study will shed light on the technological applications of lead-free halide perovskites in extreme pressure conditions.

Unveiling the impact of exchange-correlation functionals on the description of key electronic properties of non-fullerene acceptors in organic photovoltaics

Non-fullerene electron acceptors have emerged as promising alternatives to traditional electron-acceptors in the active layers of organic photovoltaics. This is due to their tunable energy levels, optical response in the visible light spectrum, high electron mobility, and photochemical stability. In this study, the electronic properties of two representative non-fullerene acceptors, ITIC and Y5, have been calculated within the framework of density functional theory using a range of hybrid and non-hybrid density functionals. Screened range-separated hybrid (SRSH) approaches were also tested. The results are analyzed in light of the previously reported experimental outcomes. Specifically, we have calculated the oxidation and reduction potentials, fundamental and optical gaps, the highest occupied molecular orbital and lowest unoccupied molecular orbital energies, and exciton binding energies. Additionally, we have investigated the effects of the medium dielectric constant on these properties employing a universal implicit solvent model. It was found that hybrid functionals generally perform poorly in predicting oxidation potentials, while non-hybrid functionals tend to overestimate reduction potentials. The inclusion of a large Hartree-Fock contribution to the global or long range was identified as the source of inaccuracy for many hybrid functionals in predicting both redox potentials and the fundamental and optical gaps. Corroborating with the available literature, ∼50% of all tested functionals predicted very small exciton binding energies, within the range of ±0.1 eV, that become even smaller by increasing the dielectric constant of the material. Finally, the OHSE2PBE and tHCTHhyb functionals and the optimal tuning SRSH approach emerged as the best-performing methods, with good accuracy in the description of the electronic properties of interest.

Transient absorption spectroscopy reveals that slow bimolecular recombination in SrTiO3 underpins its efficient photocatalytic performance

The charge carrier dynamics of SrTiO3 are measured by ultrafast transient absorption spectroscopy, revealing bimolecular recombination kinetics that are at least two magnitudes slower than alternative metal oxides. This slow recombination is associated with its high dielectric constant, and suggested to be central to SrTiO3's high performance in photocatalytic systems.

End-cap modeling on the thienyl-substituted benzodithiophene trimer-based donor molecule for achieving higher photovoltaic performance

Despite the substantial advancements in organic solar cells (OSCs), the best devices still have quite low efficiencies due to less focus on donor molecules. With the intention to present efficient donor materials, seven small donor molecules (T1-T7) were devised from DRTB-T molecule by using end-capped modeling. Newly designed molecules exhibited remarkable improved optoelectronic properties such as less band gap (from 2.00 to 2.23 eV) than DRTB-T having band gap of 2.57 eV. Similarly, a significant improvement in λmax values was noticed in designed molecules in gaseous medium (666 nm-738 nm) and solvent medium (691 nm-776 nm) than DRTB-T having λmax values at 568 nm and 588 nm in gas and solvent phase respectively. Among all molecules, T1 and T3 exhibited significant improvement in optoelectronic properties such as narrow band gap, lower excitation energy, higher λmax values and lower electron reorganization energy as compared to pre-existed DRTB-T molecule. The better functional ability of T1-T7 is also suggested by an improvement in open circuit voltage (Voc) of designed structures (1.62 eV-1.77 eV) as compared to R (1.49 eV) when PC61BM is used as an acceptor. So, all our newly derived donors can be employed in the active layer of organic solar cells to manufacture efficient OSCs.

Study of Tunable Dielectric Permittivity of PBDB-T-2CL Polymer in Ternary Organic Blend Thin Films Using Spectroscopic Ellipsometry

The ellipsometric analyses reported in this paper present a novelty by bringing an in-depth optical investigation of some ternary organic blends. This study focuses on the tunability and control of the relative permittivity of active layers by varying the weight ratio of blended materials spin-coated as thin films. To investigate this, an extensive approach based on spectroscopic ellipsometry was conducted on ternary blend (D:A1:A2) thin films, involving a donor [D = chlorinated conjugated polymer (PBDB-T-2Cl)] and two acceptor materials [A1 = a non-fullerene (ITIC-F) and A2 = a fullerene (PCBM)]. The refractive index constitutes a key parameter that exposes insights into the feasibility of photovoltaic cells by predicting the trajectory of light as it transits the device. In this term, higher obtained refractive indexes support higher absorption coefficients. Notably, the dielectric constant can be rigorously tuned and finely calibrated by modest variations in the quantity of the third element, resulting in considerable modifications. Moreover, the inclusion of fullerene in blends, as the third element, results in a smooth topographical profile, further refining the surface of the film. From an electrical point of view, the ternary blends outperform the polymer thin films. The synergistic interaction of constituents emphasizes their potential to enhance solar conversion devices.

FRET mechanism to enhance the quantum yield of the PCz/gC3N4 nanocomposite, an emissive material for OLED applications

Conjugated polymers such as polycarbazole (PCz) have captivated more attention than other carbazole-based derivatives due to their superior electrical and optical properties. Accordingly, we synthesized PCz/gC3N4 nanocomposites via the in situ polymerization method using FeCl3 as the oxidative reagent. The synthesized nanocomposites were subjected to characterization techniques to examine their optical and electrical parameters and decide whether the materials were suitable as emissive materials. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were carried out to ascertain the crystalline or amorphous nature, surface interactions, and functional groups present in them. The surface microstructural and topographical investigations were conducted using field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (HRTEM) techniques. Optical parameters, such as refractive index ∼2.06, optical absorbance, optical band energy ∼2.77 eV, and the photoluminescence emission range, were studied using UV-Visible and photoluminescence spectrometry. The theoretical relative emission quantum yield of ∼67.9% and 87.7% energy transfer from the donor to the acceptor ion via the Förster energy transfer mechanism are illustrated by the PL data. The Förster energy transfer mechanism has been elaborated. The carrier mobility ∼32.03 m2 V-1 S-1, sheet resistance ∼1.6977 × 102 Ω m, carrier density ∼11.96 × 1014 cm-3 and conductivity ∼5.90 × 10-3 S cm-1 were computed using Hall effect measurements. The dielectric constant, dielectric loss, and IV characteristic curve were estimated by the LCR and Four-probe IV measurement methods. The high PL emission intensity, CIE coordinates in the blue emission region, and the CCT value indicate that it is a suitable emissive layer material for OLED applications.

A rare case of brominated small molecule acceptors for high-efficiency organic solar cells

Given that bromine possesses similar properties but extra merits of easily synthesizing and polarizing comparing to homomorphic fluorine and chlorine, it is quite surprising very rare high-performance brominated small molecule acceptors have been reported. This may be caused by undesirable film morphologies stemming from relatively larger steric hindrance and excessive crystallinity of bromides. To maximize the advantages of bromides while circumventing weaknesses, three acceptors (CH20, CH21 and CH22) are constructed with stepwise brominating on central units rather than conventional end groups, thus enhancing intermolecular packing, crystallinity and dielectric constant of them without damaging the favorable intermolecular packing through end groups. Consequently, PM6:CH22-based binary organic solar cells render the highest efficiency of 19.06% for brominated acceptors, more excitingly, a record-breaking efficiency of 15.70% when further thickening active layers to ~500 nm. By exhibiting such a rare high-performance brominated acceptor, our work highlights the great potential for achieving record-breaking organic solar cells through delicately brominating.

Crystal structure and optical characterization of a new hybrid compound, C6H9N2FeCl4, with large dielectric constants for field-effect transistors

Due to remarkable dielectric features, such as a large dielectric constant, strong electrical conductivity, high capacitance, and low dielectric loss, hybrid materials have lately seen a huge number of applications in the field of optoelectronics. These are critical characteristics that qualify the performance of optoelectronic devices, particularly field-effect transistor components (FETs). Here, the hybrid compound 2-amino-5-picoline tetrachloroferrate(iii) (2A5PFeCl₄) was synthesised by using the slow evaporation solution growth method at room temperature. Structural, optical, and dielectric properties have been investigated. The 2A5PFeCl₄ compound crystallises in the monoclinic system (P2₁/c space group). Its structure can be described as a successive layering of inorganic and organic parts. [FeCl₄]^- tetrahedral anions and 2-amino-5-picolinium cations are connected by N-H⋯Cl and C-H⋯Cl hydrogen bonds. The optical absorption measurement confirms the semiconductor nature with a band gap of around 2.47 eV. Additionally, the structural and electronic properties of the title compound have been investigated theoretically through DFT calculations. At low frequencies, this material has significant dielectric constants (ε ∼10⁶). Furthermore, the high electrical conductivity, low dielectric loss at high frequencies, and high capacitance show that this new material has great dielectric potential in FET technologies. Due to their high permittivity, these compounds can be employed as gate dielectrics.

Impact of Strain Relaxation on 2D Ruddlesden-Popper Perovskite Solar Cells

Although the photovoltaic performance of perovskite solar cells (PSCs) has reached the commercial standards, the unsatisfactory stability limits their further application. Hydrophobic interface and encapsulation can block the damage of water and oxygen, while the instability induced by intrinsic residual strain remains inevitable. Here, the residual strain in a two-dimensional (2D) Ruddlesden-Popper (RP) perovskite film is investigated by X-ray diffraction and atomic force microscopy. It's found that the spacer cations contribute to the residual strain even though they are not in the inorganic cages. Benefited from strain relaxation, the film quality is improved, leading to suppressed recombination, promoted charge transport and enhanced efficiency. More significantly, the strain-released devices maintain 86 % of the initial efficiency after being kept in air with 85 % relative humidity (RH) for 1080 h, 82 % under maximum power point (MPP) tracking at 50 °C for 804 h and 86 % after continuous heating at 85 °C for 1080 h.

Role of Exciton Diffusion and Lifetime in Organic Solar Cells with a Low Energy Offset

Despite general agreement that the generation of free charges in organic solar cells is driven by an energetic offset, power conversion efficiencies have been improved using low-offset blends. In this work, we explore the interconnected roles that exciton diffusion and lifetime play in the charge generation process under various energetic offsets. A detailed balance approach is used to develop an analytic framework for exciton dissociation and free-charge generation accounting for exciton diffusion to and dissociation at the donor-acceptor interface. For low-offset systems, we find the exciton lifetime to be a pivotal component in the charge generation process, as it influences both the exciton and CT state dissociation. These findings suggest that any novel low-offset material combination must have long diffusion lengths with long exciton lifetimes to achieve optimum charge generation yields.

Investigating the dielectric properties and exciton diffusion in C70 derivatives

In recent years, the dielectric constant (ε_r) of organic semiconductors (OSCs) has been of interest in the organic photovoltaic (OPV) community due to its potential influence on the exciton binding energy. Despite progress in the design of high ε_r OSCs and the accurate measurement of the ε_r, the effects of the synthetic strategies on specific (opto)electronic properties of the OSCs remain uncertain. In this contribution, the effects of ε_r on the optical properties of five new C₇₀ derivatives and [70]PCBM are investigated. Together with [70]PCBM, the derivatives have a range of ε_r values that depend on the polarity and length of the side chains. The properties of the singlet excitons are investigated in detail with steady-state and time-resolved spectroscopy and the exciton diffusion length is measured. All six derivatives show similar photophysical properties in the neat films. However, large differences in the crystallinity of the fullerene films influence the exciton dynamics in blend films. This work shows that design principles for OSCs with a higher ε_r can have a very different influence on the performance of traditional BHJ devices and in neat films and it is important to consider the neat film properties when investigating the optoelectronic properties of new materials for OPV.

Janus monolayer HfSO with improved optical properties as a novel material for photovoltaic and photocatalyst applications

First principles calculations were performed to investigate the photocatalytic behavior of 2D Janus monolayer HfSO at equilibrium and under the influence of strains and external electric fields.

Asymmetric Glycolated Substitution for Enhanced Permittivity and Ecocompatibility of High-Performance Photovoltaic Electron Acceptor

Traditional organic photovoltaic materials exhibit low dielectric constants (εr) of 3 to 4, restricting the further enhancement of power conversion efficiencies (PCEs) of organic solar cells (OSCs). Herein we design and synthesize a fused-ring electron acceptor named Y6-4O through introducing an asymmetric highly polarizable oligo(ethylene glycol) side chain onto the pyrrole unit of Y6. Compared with alkylated Y6 (εr = 3.36), asymmetric glycolated Y6-4O shows a notably higher εr value of 5.13 and better solubility in nonhalogen solvents. Because of the higher εr value, the devices based on as-cast PM6:Y6-4O processed using toluene exhibit a higher charge separation yield, slower bimolecular recombination kinetics, and less voltage loss relative to the control devices based on PM6:Y6. Consequently, a high PCE of 15.2% is achieved for PM6:Y6-4O-based devices, whereas the PM6:Y6-based devices show PCEs of only 7.38%. 15.2% is the highest PCE for the as-cast nonhalogenated processed OSC devices, and it is also much higher than the values (<8.5%) reported for OSCs based on high-permittivity (εr > 5) organic photovoltaic semiconductors.

Fine-Tuning the Dipole Moment of Asymmetric Non-Fullerene Acceptors Enabling Efficient and Stable Organic Solar Cells

Modifying molecular conjugation has been demonstrated as an effective strategy to enhance the photovoltaic performance of the non-fullerene small molecule acceptors (SMAs), which would regulate the molecular packing and nanoscale morphology in the active layer of organic solar cells (OSCs). Here, two novel SMAs PTIC-4Cl and PT2IC-4Cl are designed and synthesized by expanding the core unit of TB-4Cl in one or two directions. The effects of how to expand the conjugation length on the absorption property, energy levels, dipole moment, and solubility are studied via theoretical calculation and experiments. Compared to PT2IC-4Cl, PTIC-4Cl with a more asymmetric structure exhibits the larger dipole moment and enhanced intermolecular packing. The PTIC-4Cl-based OSCs exhibit a favorable morphology and balanced charge transport, thereby leading to the highest power conversion efficiencies. In addition, PTIC-4Cl-based devices show outstanding thermal and air stability. These results reveal that fine-tuning the dipole moment via rationally expanding the conjugation in asymmetric A-D₁A'D₂-A-type non-fullerene acceptors is critical to achieve high-performance OSCs.