High-resolution three-dimensional imaging of the lateral plasma membrane of cochlear outer hair cells by atomic force microscopy

Effect of cold plasma on glial cell morphology studied by atomic force microscopy

The atomic force microscope (AFM) is broadly used to study the morphology of cells. The morphological characteristics and differences of the cell membrane between normal human astrocytes and glial tumor cells are not well explored. Following treatment with cold atmospheric plasma, evaluation of the selective effect of plasma on cell viability of tumor cells is poorly understood and requires further evaluation. Using AFM we imaged morphology of glial cells before and after cold atmospheric plasma treatment. To look more closely at the effect of plasma on cell membrane, high resolution imaging was used. We report the differences between normal human astrocytes and human glioblastoma cells by considering the membrane surface details. Our data, obtained for the first time on these cells using atomic force microscopy, argue for an architectural feature on the cell membrane, i.e. brush layers, different in normal human astrocytes as compared to glioblastoma cells. The brush layer disappears from the cell membrane surface of normal E6/E7 cells and is maintained in the glioblastoma U87 cells after plasma treatment.

Atomic force microscopy of biological samples

The ability to evaluate structural-functional relationships in real time has allowed scanning probe microscopy (SPM) to assume a prominent role in post genomic biological research. In this mini-review, we highlight the development of imaging and ancillary techniques that have allowed SPM to permeate many key areas of contemporary research. We begin by examining the invention of the scanning tunneling microscope (STM) by Binnig and Rohrer in 1982 and discuss how it served to team biologists with physicists to integrate high-resolution microscopy into biological science. We point to the problems of imaging nonconductive biological samples with the STM and relate how this led to the evolution of the atomic force microscope (AFM) developed by Binnig, Quate, and Gerber, in 1986. Commercialization in the late 1980s established SPM as a powerful research tool in the biological research community. Contact mode AFM imaging was soon complemented by the development of non-contact imaging modes. These non-contact modes eventually became the primary focus for further new applications including the development of fast scanning methods. The extreme sensitivity of the AFM cantilever was recognized and has been developed into applications for measuring forces required for indenting biological surfaces and breaking bonds between biomolecules. Further functional augmentation to the cantilever tip allowed development of new and emerging techniques including scanning ion-conductance microscopy (SICM), scanning electrochemical microscope (SECM), Kelvin force microscopy (KFM) and scanning near field ultrasonic holography (SNFUH).

Atomic force microscopy imaging of the structure of the motor protein prestin reconstituted into an artificial lipid bilayer

Prestin is the motor protein of cochlear outer hair cells and is essential for mammalian hearing. The present study aimed to clarify the structure of prestin by atomic force microscopy (AFM). Prestin was purified from Chinese hamster ovary cells which had been modified to stably express prestin, and then reconstituted into an artificial lipid bilayer. Immunofluorescence staining with anti-prestin antibody showed that the cytoplasmic side of prestin was possibly face up in the reconstituted lipid bilayer. AFM observation indicated that the cytoplasmic surface of prestin was ring-like with a diameter of about 11 nm.

Organization of membrane motor in outer hair cells: an atomic force microscopic study

Using atomic force microscopy, we imaged the cytosolic surface of the lateral plasma membrane of outer hair cells from guinea pigs’ inner ear. We used a “cell-free” preparation, in which a patch of plasma membrane was firmly attached to a substrate and the cytoplasmic face was exposed. The membrane patches contained densely packed particles whose diameter, after correcting for the geometry of the probing tip, was ∼10 nm. The particles were predominantly aligned unidirectionally with spacing of ∼36 nm. The density of the particle was ∼850 μm⁻², which could be an underestimate presumably due to the method of sample preparation. Antibody-labeled specimens showed particles more elevated than unlabeled preparation indicative of primary and secondary antibody complexes. The corrected diameters of these particles labeled with anti-actin were ∼12 nm while that with antiprestin were ∼8 nm. The alignment pattern in antiprestin-labeled specimens resembled that of the unlabeled preparation. Specimens labeled with actin antibodies did not show such alignment. We interpret that the particles observed in the unlabeled membranes correspond to the 10-nm particles reported by electron microscopy and that these particles contain prestin, a member of the SLC26 family, which is essential for electromotility.

Atomic force microscopy in studies of the cochlea

The high sensitivity of mammalian hearing is achieved by amplification of the motion of the cochlear partition. The origin of this cochlear amplification is the elongation and contraction of outer hair cells (OHCs) in response to acoustical stimulation. This motility is made possible by a membrane protein embedded in the lateral membrane of OHCs. The gene of this protein has been identified and termed prestin. We, herein, present a method for observation by atomic force microscopy (AFM) of prestin expressed in the Chinese hamster ovary (CHO) cell plasma membrane. To obtain a stable sample for AFM imaging in liquid, we used as an example in the protocol provide here, CHO cells transfected with prestin or FLAG-tagged prestin, and untransfected CHO cells. The cells attached to a substrate were subjected to ultrasonic waves generated from a sonicator probe so that the inside-out plasma membranes remained on the substrate. Prestin was immunostained with mouse anti-FLAG primary antibody and FITC-conjugated goat anti-mouse IgG secondary antibody. The lipid of the plasma membrane was labeled with fluorescence probes. The cytoplasmic faces of the cells were then observed in liquid by the tapping mode of AFM at low and high magnifications. More particle-like structures 8-12 nm in diameter were observed in the plasma membranes of the prestin-transfected CHO cells than in those of the untransfected CHO cells. Since the difference between these two types of cells is due to the existence of prestin, such particle-like structures in the prestin-transfected CHO cells are possibly constituted by prestin.

Past, present and future of atomic force microscopy in life sciences and medicine

To introduce this special issue of the Journal of Molecular Recognition dedicated to the applications of atomic force microscopy (AFM) in life sciences, this paper presents a short summary of the history of AFM in biology. Based on contributions from the first international conference of AFM in biological sciences and medicine (AFM BioMed Barcelona, 19-21 April 2007), we present and discuss recent progress made using AFM for studying cells and cellular interactions, probing single molecules, imaging biosurfaces at high resolution and investigating model membranes and their interactions. Future prospects in these different fields are also highlighted.

The motor protein prestin is a bullet-shaped molecule with inner cavities

Prestin is a transmembrane motor protein localized at the outer hair cells (OHCs) of the mammalian inner ear. Voltage-dependent conformational changes in prestin generate changes in the length of OHCs. A loss of prestin function is reported to induce severe auditory deficiencies, suggesting prestin-dependent changes of OHC length may be at least a part of cochlear amplification. Here we expressed the recombinant FLAG-fused prestin proteins in Sf9 cells and purified to particles of a uniform size in EM. The square-shaped top view of purified prestin, the binding of multiple anti-FLAG antibodies to each prestin particle, the native-PAGE analysis, and the much larger molecular weight obtained from size exclusion chromatography than the estimation for the monomer all support that prestin is a tetramer (Zheng, J., Du, G. G., Anderson, C. T., Keller, J. P., Orem, A., Dallos, P., and Cheatham, M. (2006) J. Biol. Chem. 281, 19916-19924). From negatively stained prestin particles, the three-dimensional structure was reconstructed at 2 nm resolution assuming 4-fold symmetry. Prestin is shown to be a bullet-shaped particle with a large cytoplasmic domain. The surface representation demonstrates indentations on the molecule, and the slice images indicate the inner cavities of sparse densities. The dimensions, 77 x 77 x 115 A, are consistent with the previously reported sizes of motor proteins on the surface of OHCs.

Functional expression and microdomain localization of prestin in cultured cells

INTRODUCTION

Prestin is an essential component of the molecular motor of cochlear outer hair cells that contribute to frequency selectivity and sensitivity of mammalian hearing. A model system to study prestin employs its transfection into cultured HEK 293 cells. Our goal was to characterize prestin's trafficking pathway and localization in the plasma membrane.

METHODS

We used immuno-colocalization of prestin with intracellular and plasma membrane markers and sucrose density fractionation to analyze prestin in membrane compartments. Voltage clamping was used to measure nonlinear capacitance (NLC), prestin's electrical signature.

RESULTS & DISCUSSION

Prestin targets to the membrane by 24 hours post-transfection when NLC is measurable. Prestin then concentrates into membrane foci that colocalize and fractionate with membrane microdomains. Depleting membrane cholesterol content altered prestin localization and NLC.

CONCLUSION

Prestin activity in HEK 293 cells results from expression in the plasma membrane and altering membrane lipid content affects prestin localization and activity.

Hypotonic swelling of salicylate-treated cochlear outer hair cells

The outer hair cell (OHC) is a hydrostat with a low hydraulic conductivity of Pf=3x10(-4) cm/s across the plasma membrane (PM) and subsurface cisterna that make up the OHC's lateral wall. The SSC is structurally and functionally a transport barrier in normal cells that is known to be disrupted by salicylate. The effect of sodium salicylate on Pf is determined from osmotic experiments in which isolated, control and salicylate-treated OHCs were exposed to hypotonic solutions in a constant flow chamber. The value of Pf=3.5+/-0.5x10(-4) cm/s (mean+/-s.e.m., n=34) for salicylate-treated OHCs was not significantly different from Pf=2.4+/-0.3x10(-4) cm/s (mean+/-s.e.m., n=31) for untreated OHCs (p=.3302). Thus Pf is determined by the PM and is unaffected by salicylate treatment. The ratio of longitudinal strain to radial strain epsilonz/epsilonc=-0.76 for salicylate-treated OHCs was significantly smaller (p=.0143) from -0.72 for untreated OHCs, and is also independent of the magnitude of the applied osmotic challenge. Salicylate-treated OHCs took longer to attain a steady-state volume which is larger than that for untreated OHCs and increased in volume by 8-15% prior to hypotonic perfusion unlike sodium alpha-ketoglutarate-treated OHCs. It is suggested that depolymerization of cytoskeletal proteins and/or glycogen may be responsible for the large volume increase in salicylate-treated OHCs as well as the different responses to different modes of application of the hypotonic solution.

Imaging by atomic force microscopy of the plasma membrane of prestin-transfected Chinese hamster ovary cells

The high sensitivity of mammalian hearing is achieved by amplification of the motion of the cochlear partition. This cochlear amplification is thought to be generated by the elongation and contraction of outer hair cells (OHCs) in response to acoustical stimulation. This motility is made possible by a membrane protein embedded in the lateral membrane of OHCs. Although a fructose transporter, GLUT-5, was initially proposed to be this protein, a later study identified the gene of the motor protein distributed throughout the OHC plasma membrane. This protein has been named "prestin." However, although previous morphological studies by electron microscopy and atomic force microscopy (AFM) found the lateral wall of OHCs to be covered with 10-nm particles, believed to be motor proteins, it is unknown whether such particles consist only of prestin or are a complex of GLUT-5 and prestin molecules. To determine if the 10-nm particles are indeed constituted only of prestin, plasma membranes of prestin-transfected and untransfected Chinese hamster ovary (CHO) cells, which do not express GLUT-5, were observed by AFM. First, the cells attached to a substrate were sonicated so that only the plasma membrane remained on the substrate. The cytoplasmic face of the cell was observed by the tapping mode of the AFM in liquid. As a result, particle-like structures were recognized on the plasma membranes of both the prestin-transfected and untransfected CHO cells. Comparison of the difference in the frequency distribution of these structures between those two cells showed approximately 75% of the particle-like structures with a diameter of 8-12 nm in the prestin-transfected CHO cells to be possibly constituted only by prestin molecules. Our data suggest that the densely packed 10-nm particles observed on the OHC lateral wall are likely to be constituted only of prestin molecules.

Electromechanical models of the outer hair cell composite membrane

The outer hair cell (OHC) is an extremely specialized cell and its proper functioning is essential for normal mammalian hearing. This article reviews recent developments in theoretical modeling that have increased our knowledge of the operation of this fascinating cell. The earliest models aimed at capturing experimental observations on voltage-induced cellular length changes and capacitance were based on isotropic elasticity and a two-state Boltzmann function. Recent advances in modeling based on the thermodynamics of orthotropic electroelastic materials better capture the cell's voltage-dependent stiffness, capacitance, interaction with its environment and ability to generate force at high frequencies. While complete models are crucial, simpler continuum models can be derived that retain fidelity over small changes in transmembrane voltage and strains occurring in vivo. By its function in the cochlea, the OHC behaves like a piezoelectric-like actuator, and the main cellular features can be described by piezoelectric models. However, a finer characterization of the cell's composite wall requires understanding the local mechanical and electrical fields. One of the key questions is the relative contribution of the in-plane and bending modes of electromechanical strains and forces (moments). The latter mode is associated with the flexoelectric effect in curved membranes. New data, including a novel experiment with tethers pulled from the cell membrane, can help in estimating the role of different modes of electromechanical coupling. Despite considerable progress, many problems still confound modelers. Thus, this article will conclude with a discussion of unanswered questions and highlight directions for future research.

Analysis of the oligomeric structure of the motor protein prestin

Prestin, a member of the solute carrier family 26, is expressed in the basolateral membrane of outer hair cells. This protein provides the molecular basis for outer hair cell somatic electromotility, which is crucial for the frequency selectivity and sensitivity of mammalian hearing. It has long been known that there are abundantly expressed approximately 11-nM protein particles present in the basolateral membrane. These particles were hypothesized to be the motor proteins that drive electromotility. Because the calculated size of a prestin monomer is too small to form an approximately 11-nM particle, the possibility of prestin oligomerization was examined. We investigated possible quaternary structures of prestin by lithium dodecyl sulfate-PAGE, perfluoro-octanoate-PAGE, a membrane-based yeast two-hybrid system, and chemical cross-linking experiments. Prestin, obtained from different host or native cells, is resistant to dissociation by lithium dodecyl sulfate and behaves as a stable oligomer on lithium dodecyl sulfate-PAGE. In the membrane-based yeast two-hybrid system, homo-oligomeric interactions between prestin-bait/prestin-prey suggest that prestin molecules can associate with each other. Chemical cross-linking experiments, perfluoro-octanoate-PAGE/Western blot, and affinity purification experiments all indicate that prestin exists as a higher order oligomer, such as a tetramer, in prestin-expressing yeast, mammalian cell lines and native outer hair cells. Our data from experiments using hydrophobic and hydrophilic reducing reagents suggest that the prestin dimer is connected by a disulfide bond embedded in the prestin hydrophobic core. This stable dimer may act as the building block for producing the higher order oligomers that form the approximately 11-nM particles in the outer hair cell's basolateral membrane.

Detection and localization of single molecular recognition events using atomic force microscopy

Because of its piconewton force sensitivity and nanometer positional accuracy, the atomic force microscope (AFM) has emerged as a powerful tool for exploring the forces and the dynamics of the interaction between individual ligands and receptors, either on isolated molecules or on cellular surfaces. These studies require attaching specific biomolecules or cells on AFM tips and on solid supports and measuring the unbinding forces between the modified surfaces using AFM force spectroscopy. In this review, we describe the current methodology for molecular recognition studies using the AFM, with an emphasis on strategies available for preparing AFM tips and samples, and on procedures for detecting and localizing single molecular recognition events.

Sample preparation procedures for biological atomic force microscopy

Since the late 1980s, atomic force microscopy (AFM) has been increasingly used in biological sciences and it is now established as a versatile tool to address the structure, properties and functions of biological specimens. AFM is unique in that it provides three-dimensional images of biological structures, including biomolecules, lipid films, 2D protein crystals and cells, under physiological conditions and with unprecedented resolution. A crucial prerequisite for successful, reliable biological AFM is that the samples need to be well attached to a solid substrate using appropriate, nondestructive methods. In this review, we discuss common techniques for immobilizing biological specimens for AFM studies.

Evidence for a highly elastic shell-core organization of cochlear outer hair cells by local membrane indentation

Cochlear outer hair cells (OHCs) are thought to play an essential role in the high sensitivity and sharp frequency selectivity of the hearing organ by generating forces that amplify the vibrations of this organ at frequencies up to several tens of kHz. This tuning process depends on the mechanical properties of the cochlear partition, which OHC activity has been proposed to modulate on a cycle-by-cycle basis. OHCs have a specialized shell-core ultrastructure believed to be important for the mechanics of these cells and for their unique electromotility properties. Here we use atomic force microscopy to investigate the mechanical properties of isolated living OHCs and to show that indentation mechanics of their membrane is consistent with a shell-core organization. Indentations of OHCs are also found to be highly nonhysteretic at deformation rates of more than 40 microm/s, which suggests the OHC lateral wall is a highly elastic structure, with little viscous dissipation, as would appear to be required in view of the very rapid changes in shape and mechanics OHCs are believed to undergo in vivo.

Imaging of the cortical cytoskeleton of guinea pig outer hair cells using atomic force microscopy

Mammalian outer hair cells (OHCs) are known to respond to acoustical stimulation with elongation and contraction of the cells' cylindrical soma in vivo, and this motility is related to both the protein motors distributed along the OHC plasma membrane and the cytoskeleton beneath it. Therefore, the cytoskeleton seems to play an important role in the motility of the OHC. Recently, an atomic force microscope (AFM) was used to investigate the OHC cytoskeleton under physiological conditions. However, details were not made clear in that study. In this study, the ultrastructure of the cytoskeleton of fixed OHCs of guinea pigs, which were extracted with Triton X-100, was investigated using the AFM. As a result, the cortical cytoskeleton, which is formed by discrete oriented domains, was imaged, and circumferential filaments and cross-links were observed within the domain. Morphological change of the cytoskeleton of the OHC induced by diamide treatment was then examined using the AFM, and reduction of cross-links was observed. The examination indicates that the cortical cytoskeleton comprises circumferential actin filaments and spectrin cross-links.