Supramolecular Hemicage Cobalt Mediators for Dye-Sensitized Solar Cells

Spontaneous ligand loss by soft landed [Ni(bpy)3]2+ ions on perfluorinated self-assembled monolayer surfaces

Transition metal (TM) complexes are widely used in catalysis, photochemical energy conversion, and sensing. Understanding factors that affect ligand loss from TM complexes at interfaces is important both for generating catalytically-active undercoordinated TM complexes and for controlling the degradation pathways of photosensitizers and photoredox catalysts. Herein, we demonstrate that well-defined TM complexes prepared on surfaces using ion soft landing undergo substantial structural rearrangements resulting in ligand loss and formation of both stable and reactive undercoordinated species. We employ nickel bipyridine (Ni-bpy) cations as a model system and explore their structural reorganization on surfaces using a combination of experimental and computational approaches. The controlled preparation of surface layers by mass-selected deposition of [Ni(bpy)3]2+ cations provides insights into the chemical reactivity of these species on surfaces. Both surface characterization using mass spectrometry and electronic structure calculations using density functional theory (DFT) indicate that [Ni(bpy)3]2+ undergoes a substantial geometry distortion on surfaces in comparison with its gas-phase structure. This distortion reduces the ligand binding energy and facilitates the formation of the undercoordinated [Ni(bpy)2]2+. Additionally, charge reduction by the soft landed [Ni(bpy)3]2+ facilitates ligand loss. We observe that ligand loss is inhibited by co-depositing [Ni(bpy)3]2+ with a stable anion such as closo-dodecaborate dianion, [B12F12]2-. The strong electrostatic interaction between [Ni(bpy)3]2+ and [B12F12]2- diminishes the distortion of the cation due to interactions with the surface. This interaction stabilizes the soft landed cation by reducing the extent of charge reduction and its structural reorganization. Overall, this study shows the intricate interplay of charge state, ion surface interactions, and stabilization by counterions on the structure and reactivity of metal complexes on surfaces. The combined experimental and computational approach used in this study offers detailed insights into factors that affect the integrity and stability of active species relevant to energy production and catalysis.

Stable Cobalt-Mediated Monolithic Dye-Sensitized Solar Cells by Full Glass Encapsulation

Dye-sensitized solar cells (DSSCs) emerged in the market as one of the most promising indoor photovoltaic technologies to address the need for wireless powering of low-consuming electronics and sensor nodes of the internet of things (IoT). The monolithic design structure of the cell (M-DSSCs) makes the devices simpler and cheaper, and it is straightforward for constructing in-series modules. The most efficient DSSCs reported so far are Co(III/II)-mediated liquid junction cells with acetonitrile electrolytes; however, they are mostly unstable. This study reports on highly stable cobalt-mediated M-DSSCs, passing thermal cycling tests up to 85 °C according to ISOS standard protocols. Under 1000 h of aging in the dark and under simulated solar and artificial light soaking, all tested cells improved or retained their initial power conversion efficiency. Advanced long-term stability was achieved by eliminating the extrinsic factors of degradation, such as the interaction of the cell components with the environment and electrolyte leakage. This was obtained by encapsulation of the devices using a glass-frit sealant, including the holes for filling up the liquid components of the cells. The hermeticity of the encapsulation complies with the MIL-STD-883 standard fine helium gas leakage test, and its hermeticity remained unchanged after humidity-freeze cycles according to IEC 61646. The elimination of extrinsic degradation factors allowed reliable assessment of inner factors accountable for aging. The impact of the ISOS-protocol test conditions on the intrinsic device stability and long-term photovoltaic history of the M-DSSCs is discussed.

Solar energy conversion using first row d-block metal coordination compound sensitizers and redox mediators

The use of renewable energy is essential for the future of the Earth, and solar photons are the ultimate source of energy to satisfy the ever-increasing global energy demands. Photoconversion using dye-sensitized solar cells (DSCs) is becoming an established technology to contribute to the sustainable energy market, and among state-of-the art DSCs are those which rely on ruthenium(ii) sensitizers and the triiodide/iodide (I3 -/I-) redox mediator. Ruthenium is a critical raw material, and in this review, we focus on the use of coordination complexes of the more abundant first row d-block metals, in particular copper, iron and zinc, as dyes in DSCs. A major challenge in these DSCs is an enhancement of their photoconversion efficiencies (PCEs) which currently lag significantly behind those containing ruthenium-based dyes. The redox mediator in a DSC is responsible for regenerating the ground state of the dye. Although the I3 -/I- couple has become an established redox shuttle, it has disadvantages: its redox potential limits the values of the open-circuit voltage (V OC) in the DSC and its use creates a corrosive chemical environment within the DSC which impacts upon the long-term stability of the cells. First row d-block metal coordination compounds, especially those containing cobalt, and copper, have come to the fore in the development of alternative redox mediators and we detail the progress in this field over the last decade, with particular attention to Cu2+/Cu+ redox mediators which, when coupled with appropriate dyes, have achieved V OC values in excess of 1000 mV. We also draw attention to aspects of the recyclability of DSCs.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

DFT Study of the CNS Ligand Effect on the Geometry, Spin-State, and Absorption Spectrum in Ruthenium, Iron, and Cobalt Quaterpyridine Complexes

Geometry parameters, total energy of the system in different spin states, harmonic vibrational frequencies, and absorption spectra were computed for a range of mononuclear quaterpyridine Ru(II), Fe(III/II), and Co(III/II) complexes with two axial ambidentate CNS ligands by using density functional theory (DFT) and time-dependent DFT calculations. Both structural and electronic properties were found to be correlating with the type of the binding atom in the CNS ligand (isomerization differs by 4-13 kcal·mol-1). The N-bonding of CNS ligands is energetically favored. It was also found that the low spin (LS) state is the ground state for both Ru(II) and Co(III) complexes regardless of the CNS arrangement. The other complexes are the high-spin (HS) ground-state ones with the only exception of the S-bonded CNS isomer of the Fe(III) complex. The dependencies of energy differences between the HS and LS states versus C demonstrated stabilization of the HS state with an increasing amount of the exact exchange admixture (C) for iron and cobalt complexes. An opposite behavior was observed for ruthenium complexes. The best match in harmonic vibrational frequencies between the experimental and calculated values has been reached at C = 0.15 for all the complexes. The absorption profile of the Fe(II) complex with the alternatively bonded CNS ligands strongly depends on the angle between them. The light-harvesting efficiency of the Fe(II) complexes is very similar (∼0.4) and sufficiently close to that of the Ru(II) complexes. The iron-based coordination compounds are considered as a prospective dye for dye-sensitized solar cells. The results of calculations were completed with experimental reference data, thus providing a systematic compendium for practical use.

Progress on Electrolytes Development in Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) have been intensely researched for more than two decades. Electrolyte formulations are one of the bottlenecks to their successful commercialization, since these result in trade-offs between the photovoltaic performance and long-term performance stability. The corrosive nature of the redox shuttles in the electrolytes is an additional limitation for industrial-scale production of DSSCs, especially with low cost metallic electrodes. Numerous electrolyte formulations have been developed and tested in various DSSC configurations to address the aforementioned challenges. Here, we comprehensively review the progress on the development and application of electrolytes for DSSCs. We particularly focus on the improvements that have been made in different types of electrolytes, which result in enhanced photovoltaic performance and long-term device stability of DSSCs. Several recently introduced electrolyte materials are reviewed, and the role of electrolytes in different DSSC device designs is critically assessed. To sum up, we provide an overview of recent trends in research on electrolytes for DSSCs and highlight the advantages and limitations of recently reported novel electrolyte compositions for producing low-cost and industrially scalable solar cell technology.

Metal Coordination Complexes as Redox Mediators in Regenerative Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) have attracted a substantial interest in the last 30 years for the conversion of solar power to electricity. An important component is the redox mediator effecting the transport of charge between the photoelectrode and the dark counter electrode (CE). Among the possible mediators, metal coordination complexes play a prominent role and at present are incorporated in several types of devices with a power conversion efficiency exceeding 10%. The present review, after a brief introduction to the operation of DSSCs, discusses at first the requirements for a successful mediator. Subsequently, the properties of various classes of inorganic coordination complexes functioning as mediators relevant to DSSC operation are presented and the operational characteristics of DSSC devices analyzed. Particular emphasis is paid to the two main classes of efficient redox mediators, the coordination complexes of cobalt and copper; however other less efficient but promising classes of mediators, notably complexes of iron, nickel, manganese and vanadium, are also presented.

Excited-State Dynamics of [Ru(bpy)3 ]2+ Thin Films on Sensitized TiO2 and ZrO2

The excited state dynamics of Tris(2,2'-bipyridine)ruthenium(II) hexafluorophosphate, [Ru(bpy)3 (PF6 )2 ], was investigated on the surface of bare and sensitized TiO2 and ZrO2 films. The organic dyes LEG4 and MKA253 were selected as sensitizers. A Stern-Volmer plot of LEG4-sensitized TiO2 substrates with a spin-coated [Ru(bpy)3 (PF6 )2 ] layer on top shows considerable quenching of the emission of the latter. Interestingly, time-resolved emission spectroscopy reveals the presence of a fast-decay time component (25±5 ns), which is absent when the anatase TiO2 semiconductor is replaced by ZrO2 . It should be specified that the positive redox potential of the ruthenium complex prevents electron transfer from the [Ru(bpy)3 (PF6 )2 ] ground state into the oxidized sensitizer. Therefore, we speculate that the fast-decay time component observed stems from excited-state electron transfer from [Ru(bpy)3 (PF6 )2 ] to the oxidized sensitizer. Solid-state dye sensitized solar cells (ssDSSCs) employing MKA253 and LEG4 dyes, with [Ru(bpy)3 (PF6 )2 ] as a hole-transporting material (HTM), exhibit 1.2 % and 1.1 % power conversion efficiency, respectively. This result illustrates the possibility of the hypothesized excited-state electron transfer.