Green Molecular Transformation in Dual Catalysis: Photoredox Activation of Vitamin B12 Using Heterogeneous Photocatalyst

This concept focuses on dual-catalysis using metal complexes and heterogeneous photocatalysts. Vitamin B12 derivatives are sophisticated metal complexes that facilitate enzymatic reactions in the biological systems. The B12 enzymes inspired reactions catalytically proceed in dual-catalyst systems of B12 derivatives and heterogeneous photocatalysts, such as titanium oxide (TiO2) and metal-organic frameworks (MOFs), under light irradiation. The cobalt ions in B12 derivatives are effectively reduced by photoexcited photocatalysts, producing low-valent Co(I) species. The photoinduced nucleophilic Co(I) species react with an alkyl halide to form an organometallic complex with a Co-C bond. The Co-C bond dissociates during photolysis to generate alkyl radicals. Based on this mechanism, dual-catalysis effectively promotes various light-driven organic syntheses and light-driven dehalogenation reactions of toxic alkyl halides. The trends of the dual-catalyst system and recent progress in this field are discussed in this concept.

C-Cl Bond Activation at Rotated vs Unrotated Dinuclear Site Related to [FeFe]-Hydrogenases

The novel dinuclear complex related to the [FeFe]-hydrogenases active site, [Fe2(μ-pdt)(κ2-dmpe)2(CO)2] (1), is highly reactive toward chlorinated compounds CHxCl4-x (x = 1, 2) affording selectively terminal or bridging chloro diiron isomers through a C-Cl bond activation. DFT calculations suggest a cooperative mechanism involving a formal concerted regioselective chloronium transfer depending on the unrotated or rotated conformation of two isomers of 1.

Mechanistic Study for the Reaction of B12 Complexes with m-Chloroperbenzoic Acid in Catalytic Alkane Oxidations

The oxidation of alkanes with m-chloroperbenzoic acid (mCPBA) catalyzed by the B₁₂ derivative, heptamethyl cobyrinate, was investigated under several conditions. During the oxidation of cyclohexane, heptamethyl cobyrinate works as a catalyst to form cyclohexanol and cyclohexanone at a 0.67 alcohol to ketone ratio under aerobic conditions in 1 h. The reaction rate shows a first-order dependence on the [catalyst] and [mCPBA] while being independent of [cyclohexane]; V_obs = k₂[catalyst][mCPBA]. The kinetic deuterium isotope effect was determined to be 1.86, suggesting that substrate hydrogen atom abstraction is not dominantly involved in the rate-determining step. By the reaction of mCPBA and heptamethyl cobyrinate at low temperature, the corresponding cobalt(III)acylperoxido complex was formed which was identified by UV-vis, IR, ESR, and ESI-MS studies. A theoretical study suggested the homolysis of the O-O bond in the acylperoxido complex to form Co(III)-oxyl (Co-O^•) and the m-chlorobenzoyloxyl radical. Radical trapping experiments using N-tert-butyl-α-phenylnitrone and CCl₃Br, product analysis of various alkane oxidations, and computer analysis of the free energy for radical abstraction from cyclohexane by Co(III)-oxyl suggested that both Co(III)-oxyl and the m-chlorobenzoyloxyl radical could act as hydrogen-atom transfer reactants for the cyclohexane oxidation.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Application of bioorganometallic B12 in green organic synthesis

Bioorganometallic structure found in coenzyme B₁₂ is a key component in B₁₂-dependent enzymatic reactions in natural enzymes. Cleavage of a cobalt-carbon bond in organometallic B₁₂ compound provide reactive intermediate for molecular transformations. Application of the bioorganometallic B₁₂ in organic synthesis have been developed using natural vitamin B₁₂ as well as synthetic vitamin B₁₂ derivatives as a bioinspired catalyst in organic solvent. Vitamin B₁₂ derivatives composed of corrinoid structure should form stable organometallic compound having a cobalt-carbon bond. Using the unique property of the organometallic vitamin B₁₂ derivatives, various catalytic reactions have been developed in synthetic organic chemistry. The dual catalytic system of vitamin B₁₂ derivatives and photocatalyst, such as Ru(II) polypyridyl complex or titanium oxide, could construct light-driven molecular transformations. The B₁₂-dependent enzymes mimic reactions, such as the dechlorination of organic halides and the radical mediated isomerization reactions, catalytically proceed in the dual catalyst system. Electroorganic syntheses mediated by the vitamin B₁₂ derivatives have been developed as green molecular transformations. The redox active vitamin B₁₂ derivatives shows a unique catalysis in the electroorganic synthesis, such as alkene and alkyne reductions.

Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and provide an outlook for prioritizing strategic research directions.

Synthesis of a B12-BODIPY dyad for B12-inspired photochemical transformations of a trichloromethylated organic compound

A B₁₂ complex-BODIPY dyad was synthesized by peripheral modification of cobalamin derivatives. The photophysical properties of the dyad were investigated by UV-vis, PL, and transient absorption spectroscopy. A visible light-driven dechlorination reaction of a trichlorinated organic compound, DDT, was reported. The dyad showed efficient catalysis for dechlorination under N₂ with turnover numbers of over 220 for the reaction. One-pot syntheses of an ester and amide from DDT and benzotrichloride were also achieved using the dyad under air.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Redox behaviour of the β-dihydroporphycene cobalt complex: study on the effect of hydrogenation of the ligand

The dihydrogenated porphycene cobalt(ii) complex was synthesized and electrochemical experiments were carried out. The one-electron reduction of the complex proceeded at the central metal to afford the Co(i) species; in contrast, for the non-hydrogenated porphycene cobalt(ii) complex, the one-electron reduction gave the ligand reduced radical anion species. The reactivity of the one-electron reduced species with alkyl halides showed clear differences between the complexes. Hydrogenation of the β-position of the porphycene makes it possible to generate a central cobalt reduced species possessing a higher reactivity than the ligand reduced radical anion species.

Learning from B12 enzymes: biomimetic and bioinspired catalysts for eco-friendly organic synthesis

Cobalamins (B₁₂) play various important roles in vivo. Most B₁₂-dependent enzymes are divided into three main subfamilies: adenosylcobalamin-dependent isomerases, methylcobalamin-dependent methyltransferases, and dehalogenases. Mimicking these B₁₂ enzyme functions under non-enzymatic conditions offers good understanding of their elaborate reaction mechanisms. Furthermore, bio-inspiration offers a new approach to catalytic design for green and eco-friendly molecular transformations. As part of a study based on vitamin B₁₂ derivatives including heptamethyl cobyrinate perchlorate, we describe biomimetic and bioinspired catalytic reactions with B₁₂ enzyme functions. The reactions are classified according to the corresponding three B₁₂ enzyme subfamilies, with a focus on our recent development on electrochemical and photochemical catalytic systems. Other important reactions are also described, with a focus on radical-involved reactions in terms of organic synthesis.

Impact of the corrin framework of vitamin B12 on the electrochemical carbon-skeleton rearrangement in comparison to an imine/oxime planar ligand; tuning selectivity in 1,2-migration of a functional group by controlling electrolysis potential

Among the coenzyme B₁₂-dependent enzymes, methylmalonyl-CoA mutase (MMCM) catalyzes the carbon-skeleton rearrangement reaction between R-methylmalonyl-CoA and succinyl-CoA. Diethyl 2-bromomethyl-2-phenylmalonate, an alkyl bromide substrate having two different migrating groups (phenyl and carboxylic ester groups) on the β-carbon, was applied to the electrolysis mediated by a hydrophobic vitamin B₁₂ model complex, heptamethyl cobyrinate perchlorate in this study. The electrolysis of the substrate at -1.0V vs. Ag-AgCl by light irradiation afforded the simple reduced product (diethyl 2-methyl-2-phenylmalonate) and the phenyl migrated product (diethyl 2-benzyl-2-phenylmalonate), as well as the electrolysis of the substrate at -1.5V vs. Ag-AgCl in the dark. The electrolysis of the substrate at -2.0V vs. Ag-AgCl afforded the carboxylic ester migrated product (diethyl phenylsuccinate) as the major product. The selectivity for the migrating group was successfully tuned by controlling the electrolysis potential. We clarified that the cathodic chemistry of the Co(III) alkylated heptamethyl cobyrinate is critical for the selectivity of the migrating group through mechanistic investigations and comparisons to the simple vitamin B₁₂ model complex, an imine/oxime-type cobalt complex.

Photoinduced Vitamin B12-Catalysis for Deprotection of (Allyloxy)arenes

Vitamin B₁₂ is a natural cobalt complex that, while reduced to the "supernucleophilic" Co(I) form, can easily react with electrophiles via an S_N2 mechanism. It is also shown to react via an S_N2' mechanism with allylic compounds allowing for photochemical deprotection of (allyloxy)arenes. A sustainable alternative to commonly used noble metal-catalyzed deprotection reactions is presented.

A vitamin B12 derivative catalyzed electrochemical trifluoromethylation and perfluoroalkylation of arenes and heteroarenes in organic media

The electrochemical trifluoromethylation and perfluoroalkylation of aromatic compounds mediated by a vitamin B₁₂ derivative as a cobalt-based catalyst has been developed.

Photocatalytic alkene reduction by a B12–TiO2 hybrid catalyst coupled with C–F bond cleavage for gem-difluoroolefin synthesis

B₁₂–TiO₂ hybrid catalyzed CC bond reduction coupled with C–F bond cleavage under UV light irradiation is reported.