Singlet Oxygen Photosensitizing Materials for Point-of-Use Water Disinfection with Solar Reactors

Mild selective photochemical oxidation of an organic sulfide using OxP-polyimide porous polymers as singlet oxygen generators

A series of porous organic polymers based on a singlet oxygen generating oxoporphyinogen ('OxP') has been successfully prepared from a pseudotetrahedral OxP-tetraamine precursor (OxP(4-NH2Bn)4) by its reaction with tetracarboxylic acid dianhydrides under suitable conditions. Of the compounds studied, those containing naphthalene (OxP-N) and perylene (OxP-P) spacers, respectively, have large surface areas (~530 m2 g-1). On the other hand, the derivative with a simple benzene spacer (OxP-B) exhibits the best 1O2 generating capability. Although the starting OxP-tetraamine precursor is a poor 1O2 generator, its incorporation into OxP POPs leads to a significant enhancement of 1O2 productivity, which is largely due to the transformation of NH2 groups to electron-withdrawing diimides. Overall 1O2 production efficacy of OxP-POPs under irradiation by visible light is significantly improved over the common reference material PCN-222. All the materials OxP-B, OxP-N and OxP-P promote oxidation of thioanisole involving conversion of ambient triplet state oxygen to singlet oxygen under visible light irradiation and its reaction with the sulfide. Although the reaction rate of the oxidation promoted by OxP POPs is generally lower than for conventional materials (such as PCN-222) or previously studied OxP derivatives, undesired overoxidation of the substrate to methyl phenyl sulfone is suppressed. For organic sulfides, selectivity of oxidation is especially important for detoxification of mustard gas (bis(2-chloroethyl)sulfide) or similarly toxic compounds since controlled oxidation leads to the low toxicity bis(2-chloroethyl)sulfoxide while overoxidation leads to intoxification (since bis(2-chloroethyl)sulfone presents greater toxicity to humans than the sulfide substrate). Therefore, OxP POPs capable of promoting selective oxidation of sulfides to sulfoxides have excellent potential to be used as mild and selective detoxification agents.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

Systematic analysis of the scientific-technological production on the use of the UV, H2O2, and/or Cl2 systems in the elimination of bacteria and associated antibiotic resistance genes

This study presents a systematic review of the scientific and technological production related to the use of systems based on UV, H2O2, and Cl2 for the elimination of antibiotic-resistant bacteria (ARB) and genes associated with antibiotic resistance (ARGs). Using the Pro Know-C (Knowledge Development Process-Constructivist) methodology, a portfolio was created and analyzed that includes 19 articles and 18 patents published between 2011 and 2022. The results show a greater scientific-technological production in UV irradiation systems (8 articles and 5 patents) and the binary combination UV/H2O2 (9 articles and 4 patents). It was emphasized that UV irradiation alone focuses mainly on the removal of ARB, while the addition of H2O2 or Cl2, either individually or in binary combinations with UV, enhances the removal of ARB and ARG. The need for further research on the UV/H2O2/Cl2 system is emphasized, as gaps in the scientific-technological production of this system (0 articles and 2 patents), especially in its electrochemically assisted implementation, have been identified. Despite the gaps identified, there are promising prospects for the use of combined electrochemically assisted UV/H2O2/Cl2 disinfection systems. This is demonstrated by the effective removal of a wide range of contaminants, including ARB, fungi, and viruses, as well as microorganisms resistant to conventional disinfectants, while reducing the formation of toxic by-products.

Kinetic effects in singlet oxygen mediated oxidations by immobilized photosensitizers on silica

Singlet oxygen (1O2) mediated photo-oxidations are important reactions involved in numerous processes in chemical and biological sciences. While most of the current research works have aimed at improving the efficiencies of these transformations either by increasing 1O2 quantum yields or by enhancing its lifetime, we establish herein that immobilization of a molecular photosensitizer onto silica surfaces affords significant, substrate dependant, enhancement in the reactivity of 1O2. Probing a classical model reaction (oxidation of Anthracene-9, 10-dipropionic acid, ADPA or dimethylanthracene, DMA) with various spectrofluorimetric techniques, it is here proposed that an interaction between polar substrates and the silica surface is responsible for the observed phenomenon. This discovery could have a direct impact on the design of future photosensitized 1O2 processes in various applications ranging from organic photochemistry to photobiology.

Superhydrophobic Tipped Antimicrobial Photodynamic Therapy Device for the In Vivo Treatment of Periodontitis Using a Wistar Rat Model

Limited options exist for treatment of periodontitis; scaling and root planing (SRP) are not sufficient to eradicate P. gingivalis and the resulting inflammatory disease. Chlorhexidine (CHX), used as an adjuvant to SRP, may reduce bacterial loads but leads to pain and staining, while evidence for its efficacy is lacking. Antibiotics are effective but can lead to drug-resistance. The rising concern of antibiotic resistance limits the future use of this treatment approach. This study evaluates the efficacy of a novel superhydrophobic (SH) antimicrobial photodynamic therapy (aPDT) device as an adjuvant to SRP for the treatment of periodontitis induced in a Wistar rat in vivo model relative to CHX. The SH-aPDT device comprises an SH silicone rubber strip coated with verteporfin photosensitizer (PS), sterilized, and secured onto a tapered plastic optical fiber tip connected to a red diode laser. The superhydrophobic polydimethylsiloxane (PDMS) strips were fabricated by using a novel soluble template method that creates a medical-grade elastomer with hierarchical surface roughness without the use of nanoparticles. Superhydrophobicity minimizes direct contact of the PS-coated surface with bacterial biofilms. Upon insertion of the device tip into the pocket and energizing the laser, the device generates singlet oxygen that effectively targets and eliminates bacteria within the periodontal pocket. SH-aPDT treatment using 125 J/cm2 of red light on three consecutive days reduced P. gingivalis significantly more than SRP-CHX controls (p < 0.05). Clinical parameters significantly improved (p < 0.05), and histology and stereometry results demonstrated SH-aPDT to be the most effective treatment for improving healing and reducing inflammation, with an increase in fibroblast cells and extracellular matrix and a reduction in vascularization, inflammatory cells, and COX-2 expression. The SH-aPDT approach resulted in complete disease clearance assessed 30 days after treatment initiation with significant reduction of the periodontal pocket and re-formation of the junctional epithelium at the enamel-cementum junction. PS isolation on a SH strip minimizes the potential for bacteria to develop resistance, where the treatment may be aided by the oxygen supply retained within the SH surface.

Colloidal Quantum Dots as an Emerging Vast Platform and Versatile Sensitizer for Singlet Molecular Oxygen Generation

Singlet molecular oxygen (1O2) has been reported in wide arrays of applications ranging from optoelectronic to photooxygenation reactions and therapy in biomedical proposals. It is also considered a major determinant of photodynamic therapy (PDT) efficacy. Since the direct excitation from the triplet ground state (3O2) of oxygen to the singlet excited state 1O2 is spin forbidden; therefore, a rational design and development of heterogeneous sensitizers is remarkably important for the efficient production of 1O2. For this purpose, quantum dots (QDs) have emerged as versatile candidates either by acting individually as sensitizers for 1O2 generation or by working in conjunction with other inorganic materials or organic sensitizers by providing them a vast platform. Thus, conjoining the photophysical properties of QDs with other materials, e.g., coupling/combining with other inorganic materials, doping with the transition metal ions or lanthanide ions, and conjugation with a molecular sensitizer provide the opportunity to achieve high-efficiency quantum yields of 1O2 which is not possible with either component separately. Hence, the current review has been focused on the recent advances made in the semiconductor QDs, perovskite QDs, and transition metal dichalcogenide QD-sensitized 1O2 generation in the context of ongoing and previously published research work (over the past eight years, from 2015 to 2023).

Photodynamic inactivation of multidrug-resistant strains of Klebsiella pneumoniae and Pseudomonas aeruginosa in municipal wastewater by tetracationic porphyrin and violet-blue light: The impact of wastewater constituents

There is an increasing need to discover effective methods for treating municipal wastewater and addressing the threat of multidrug-resistant (MDR) strains of bacteria spreading into the environment and drinking water. Photodynamic inactivation (PDI) that combines a photosensitiser and light in the presence of oxygen to generate singlet oxygen and other reactive species, which in turn react with a range of biomolecules, including the oxidation of bacterial genetic material, may be a way to stop the spread of antibiotic-resistant genes. The effect of 5,10,15,20-(pyridinium-3-yl)porphyrin tetrachloride (TMPyP3) without light, and after activation with violet-blue light (VBL) (394 nm; 20 mW/cm2), on MDR strains of Pseudomonas aeruginosa, Klebsiella pneumoniae and K. pneumoniae OXA-48 in tap water and municipal wastewater was investigated. High toxicity (~2 μM) of TMPyP3 was shown in the dark on both strains of K. pneumoniae in tap water, while on P. aeruginosa toxicity in the dark was low (50 μM) and the PDI effect was significant (1.562 μM). However, in wastewater, the toxicity of TMPyP3 without photoactivation was much lower (12.5-100 μM), and the PDI effect was significant for all three bacterial strains, already after 10 min of irradiation with VBL (1.562-6.25 μM). In the same concentrations, or even lower, an anti-adhesion effect was shown, suggesting the possibility of application in biofilm control. By studying the kinetics of photoinactivation, it was found that with 1,562 μM of TMPyP3 it is possible to achieve the complete destruction of all three bacteria after 60 min of irradiation with VBL. This study confirmed the importance of studying the impact of water constituents on the properties and PDI effect of the applied photosensitiser, as well as checking the sensitivity of targeted bacteria to light of a certain wavelength, in conditions as close as possible to those in the intended application, to adjust all parameters and perfect the method.

Development of water-soluble phenazine-2,3-diol-based photosensitizers for singlet oxygen generation

Phenazine-2,3-diol-based dyes, KY-1Na and KY-2Na bearing one and two carboxylic acid sodium salts, respectively, have been newly developed as water-soluble photosensitizers (PSs) possessing the ability to generate singlet oxygen (¹O₂). In order to evaluate the solubility of KY-1Na and KY-2Na in water, the hydrophobicity/hydrophilicity of the two PSs was investigated by experimental measurement of the logarithms (log P_o/w) of the 1-octanol/water partition coefficient (P_o/w) for the PS. The log P_o/w values of both KY-1Na and KY-2Na were determined to be -0.9, indicating that both the PSs are more hydrophilic than Rose Bengal (-0.6) and have hydrophilicity equivalent to methylene blue (-0.9). Both the PSs in water show a broad photoabsorption band in the range of 500 to 600 nm. Thus, we estimated the ¹O₂ quantum yields (Φ_Δ) of KY-1Na and KY-2Na in water by using 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABDA) as a water-soluble ¹O₂ scavenger. It was found that in water the Φ_Δ value (0.19) of KY-2Na is higher than that of KY-1Na (0.06). Density functional theory (DFT) calculations suggested that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributions for the molecular structure of KY-2Na are adequately separated, leading to a decrease in the energy gap (ΔE_ST) between the singlet state (S₁) and the triplet state (T₁) that causes efficient intersystem crossing (ISC), compared to that for the molecular structure of KY-1Na. Indeed, time-dependent DFT (TD-DFT) calculations demonstrated that the ΔE_ST(S₁-T₁) value (0.82 eV) of KY-2Na is smaller than that (0.98 eV) of KY-1Na, resulting in a relatively high Φ_Δ value of KY-2Na. Consequently, we demonstrate that phenazine-2,3-diol-based PSs bearing carboxylic acid salts possess high solubility and moderate ¹O₂ generation ability in water.

Porphyrin covalent organic nanodisks synthesized using acid-assisted exfoliation for improved bactericidal efficacy

Porphyrin covalent organic nanodisks (CONs) were synthesized by exfoliating covalent organic frameworks (COFs) in acidic aqueous solutions at pH 4. The synthesized CONs showed remarkable bactericidal activity against Escherichia coli owing to enhanced generation of singlet oxygen upon visible light irradiation.

Photosensitizer Encryption with Aggregation Enhanced Singlet Oxygen Production

Chromophores that generate singlet oxygen (¹O₂) in water are essential to developing noninvasive disease treatments using photodynamic therapy (PDT). A facile approach for formation of stable colloidal nanoparticles of ¹O₂ photosensitizers, which exhibit aggregation enhanced ¹O₂ generation in water toward applications as PDT agents, is reported. Chromophore encryption within a fuchsonarene macrocyclic scaffold insulates the photosensitizer from aggregation induced deactivation pathways, enabling a higher chromophore density than typical ¹O₂ generating nanoparticles. Aggregation enhanced ¹O₂ generation in water is observed, and variation in molecular structure allows for regulation of the physical properties of the nanoparticles which ultimately affects the ¹O₂ generation. In vitro activity and the ability of the particles to pass through the cell membrane into the cytoplasm is demonstrated using confocal fluorescence microscopy with HeLa cells. Photosensitizer encryption in rigid macrocycles, such as fuchsonarenes, offers new prospects for the production of biocompatible nanoarchitectures for applications involving ¹O₂ generation.

Spontaneous nutrient recovery and disinfection of aquaculture wastewater via Mg-coconut shell carbon composites

Aquaculture wastewater contained large amounts of pathogenic microorganisms, nitrogen (N) and phosphorus (P). In this study, the nutrient recoveries and wastewater disinfection were simultaneously achieved using Mg-coconut shell carbon (Mg-CSC). The composites were prepared by a ball milling method. The hydrogen peroxide (H₂O₂) was in-situ generated by the dissolved oxygen reduction driven by Mg corrosion on the CSC surface, which inactivated the microorganisms. Besides that, Mg corrosion provided sufficient Mg ions and appropriate pH conditions for struvite formation. The results show that 5.4-log E.coli removal was achieved under different conditions. Improving the Mg/CSC ratio and composite dosage could shorten the time required for disinfection. In addition to H₂O₂, singlet oxygen played a critical role. Reactive oxygen species destroyed the cellular structure and killed the bacteria. The recoveries of NH₄⁺-Nand P under certain conditions were about 60% and 91%, respectively. An increased composite dosage could improve the recovery ratio of P. Excessive dosages were not beneficial for removing NH₄⁺-N. The characterization result revealed that struvite crystals were the main precipitates on the CSC surface. The Mg-CSC composites also revealed satisfied nutrient recovery and disinfection performances in the real aquaculture wastewater treatment process.

Nonionic omnisoluble photosensitizer reference material for the estimation of singlet oxygen quantum yield

Meso-Tetrakis-(3,4,5-tris{2-[2-(2-methoxyethoxy)ethoxy]ethoxy}phenyl)porphyrin TEG12PH2 is reported as an 'omnisoluble' reference for singlet oxygen (¹O₂) generation quantum yield (Φ_SO) estimation. TEG12PH2 is a highly soluble, nonionic compound possessing excellent ¹O₂ QY in a wide variety of common solvents, including water. TEG12PH2 was prepared on multigram scale by the 12-way O-alkylation of tetrakis(3,4,5-trihydroxyphenyl)porphyrin using 2-(2-(2-methoxyethoxy)ethoxy)ethyl 4-toluenesulfonate as a reaction solvent. The corresponding Zn(II) complex TEG12PZn was also prepared and studied. The ¹O₂ QYs of TEG12PH2 in the different solvents studied were found to be 0.86 (acetone), 0.59 (acetonitrile), 0.66 (chloroform), 0.85 (methanol), 0.45 (toluene) and 0.51 (water). TEG12PH2 can be considered a reliable and easy to implement omnisoluble reference compound for the estimation of the ¹O₂ generating activities of new materials, especially new porphyrinic compounds.

Copper oxide/peroxydisulfate system for urban wastewater disinfection: Performances, reactive species, and antibiotic resistance genes removal

In this study, copper oxide (CuO) catalyzed peroxydisulfate (PDS) system was investigated for the inactivation of a broad range of pathogenic microorganisms from urban wastewater. Complete inactivation of Escherichia coli, Enterococcus, F-specific RNA bacteriophages from secondary treated wastewater was achieved after a short time (15-30 min) treatment with CuO (10 g/L)/PDS (1 mM) system, but spores of sulfite-reducing bacteria took 120 min. No bacterial regrowth occurred during storage after treatment. Significant reduction of the pathogens was explained by the generation of the highly selective Cu(III) oxidant, as the predominant reactive species, which could quickly oxidize guanine through a one-electron oxidation pathway. Additionally, the potential of the CuO (10 g/L)/PDS (1 mM) system to inactivate antibiotic-resistant bacteria and antibiotic resistance genes (ARB&Gs) was explored. Sulfamethoxazole-resistant E. coli was used as the model ARB and a 3.2 log of reduction was observed after 10 min of treatment. A considerable reduction (0.7-2.3 log) of selected ARGs including blaTEM, qnrS, emrB, sul1, and genes related to the dissemination of antibiotic resistance, including the Class 1 integron-integrase (intI1), and the insertion sequence (IS613) was achieved after 60 min treatment. All these findings indicated the promising applicability of the CuO/PDS system as a disinfection technology for wastewater reuse in agriculture.

Development of a modular photoreactor for the upscaling of continuous flow photochemistry

The upscaling of biphasic photochemical reactions is challenging because of the inherent constraints of liquid–gas mixing and light penetration. Using semi-permeable coaxial flow chemistry within a modular photoreactor, the photooxidation of the platform chemical furfural was scaled up to produce routinely 29 gram per day of biobased building block hydroxybutenolide, a precursor to acrylate alternatives.

An easily-built, user-friendly modular photoreactor enables optimization and upscaling of flow photooxidation.

Electrochemical biosensor based on singlet oxygen generated by molecular photosensitizers

Here a sensing strategy with the integration of photosensitizer and electrochemical analysis was present. The photosensitizer, Zinc(II) tetraphenylporphyrin (ZnTCPP), was functionalized graphene oxide (GO) to form complex (ZnTCPP/GO) as the electrode material and generated singlet-oxygen (¹O₂) in the presence of air under light illumination. Due to the special electronic structure of ¹O₂, hydroquinone (HQ) could react with ¹O₂ to produce electrochemically-detectable products, benzoquinone (BQ). Meanwhile, the formed BQ could be reduced on the electrode, completing the redox cycling. The ZnTCPP/GO modified ITO electrode produces a stable and enhanced photocurrent signal under 420 nm irradiation in air-saturated buffer, compared with in N₂-saturated buffer. On the other hand, l-glutathione (GSH) as a signalling molecule plays important role in physiological process, which was employed as model to investigated the sensing performance. Coupling with HQ oxidized by ¹O₂, a GSH sensor was constructed on the basis the redox cycling of HQ. A sensitive reduction of photocurrent is observed with the addition of GSH, due to the GSH could be oxidized by the generated ¹O₂ to form GSSG. The biosensor displayed good performance in a broad concentration range of 0-150 μM, with a lower detection limit of 1.3 μM at an S/N ratio of 3, and could be used in practical application. This work affords a platform for constructing the biosensor with ¹O₂ instead of enzyme via on/off light switching.

Self-Assembled Microporous M-HOFs Based on an Octahedral Rhenium Cluster with Benzimidazole

Substitution of apical halide ligands in [{Re₆Seⁱ₈}X^a₆]^3- (X = Cl, Br) by benzimidazole (bimzH) accompanied by a self-assembly process leads to the formation of microporous Re₆-based hydrogen-bonded organic frameworks (Re₆-HOFs) constructed on N-H···X hydrogen bonds and π-π-stacking interactions between bimzH ligands. Re₆-HOFs demonstrate sorption properties with a Brunauer-Emmett-Teller surface area of up to 443 m² g^-1 and luminescence with a quantum yield and an emission lifetime of up to 0.16 and 16 μs, respectively. The compounds obtained complement small groups of transition-metal cluster-based HOFs, which are a perspective for the development of multifunctional frameworks.

Thermal Disproportionation for the Synthesis of Silicon Nanocrystals and Their Photoluminescent Properties

In the past decades, silicon nanocrystals have received vast attention and have been widely studied owing to not only their advantages including nontoxicity, high availability, and abundance but also their unique luminescent properties distinct from bulk silicon. Among the various synthetic methods of silicon nanocrystals, thermal disproportionation of silicon suboxides (often with H as another major composing element) bears the superiorities of unsophisticated equipment requirements, feasible processing conditions, and precise control of nanocrystals size and structure, which guarantee a bright industrial application prospect. In this paper, we summarize the recent progress of thermal disproportionation chemistry for the synthesis of silicon nanocrystals, with the focus on the effects of temperature, Si/O ratio, and the surface groups on the resulting silicon nanocrystals’ structure and their corresponding photoluminescent properties. Moreover, the paradigmatic application scenarios of the photoluminescent silicon nanocrystals synthesized via this method are showcased or envisioned.

Pyridinium Modified Anthracenes and Their Endoperoxides Provide a Tunable Scaffold with Activity against Gram-Positive and Gram-Negative Bacteria

Due to the emergence of multidrug resistant bacteria, the development of new antibiotics is required. We introduce here asymmetrically modified positively charged bis(methylpyridinium) anthracenes as a novel tunable scaffold, in which the two positive charges can be placed at a defined distance and angle. Our structure-activity relationship reveals that coupling the methylpyridiniums with alkynyl linkers to the central anthracene unit yields antibacterial compounds against a wide range of bacteria, including Escherichia coli, Staphylococcus aureus, and Staphylococcus epidermidis. Also, different mycobacteria, such as Mycobacterium smegmatis and Mycobacterium tuberculosis, are efficiently targeted by these compounds. The antibacterial activity depends on the number of alkynyl linkers and consequently also on the distance of the positive charges in the rigid anthracene scaffold. Additionally, the formation of an anthracene endoperoxide further increases the antibacterial activity, likely due to the release of toxic singlet oxygen that converts the endoperoxide back to the antibacterial anthracene scaffold with half-lives of several hours.

Singlet Oxygen Generation from a Water-Soluble Hypervalent Iodine(V) Reagent AIBX and H2O2: An Access to Artemisinin

Herein, we report an efficient method for the chemical generation of ¹O₂ by treatment of H₂O₂ with AIBX, a highly water-soluble, bench-stable, recyclable hypervalent iodine(V) reagent developed by our group. The generation of ¹O₂ was confirmed by the following results: (1) capture of ¹O₂ with the sodium salt of anthracene-9,10-bis(ethanesulfonate) produced the corresponding endoperoxide and (2) TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) produced by the oxidation of 2,2,6,6-tetramethylpiperidine with ¹O₂ generated using the AIBX/H₂O₂ system was detected by electron spin resonance spectroscopy. To illustrate the potential utility of this method for organic synthesis, we used the AIBX/H₂O₂ system to perform typical reactions of ¹O₂: [2 + 2]/[4 + 2] cycloadditions, Schenck ene reactions, and heteroatom oxidation reactions, which afforded the corresponding products in high yields. Moreover, we used the method to synthesize the antimalarial drug artemisinin. Finally, we demonstrated that AIBX could be regenerated after the reaction by means of a workup involving extraction and removal of water to obtain a precursor of AIBX, which could then be re-oxidized.

Supramolecular Control of Singlet Oxygen Generation

Singlet oxygen (¹O₂) is the excited state electronic isomer and a reactive form of molecular oxygen, which is most efficiently produced through the photosensitized excitation of ambient triplet oxygen. Photochemical singlet oxygen generation (SOG) has received tremendous attention historically, both for its practical application as well as for the fundamental aspects of its reactivity. Applications of singlet oxygen in medicine, wastewater treatment, microbial disinfection, and synthetic chemistry are the direct results of active past research into this reaction. Such advancements were achieved through design factors focused predominantly on the photosensitizer (PS), whose photoactivity is relegated to self-regulated structure and energetics in ground and excited states. However, the relatively new supramolecular approach of dictating molecular structure through non-bonding interactions has allowed photochemists to render otherwise inactive or less effective PSs as efficient ¹O₂ generators. This concise and first of its kind review aims to compile progress in SOG research achieved through supramolecular photochemistry in an effort to serve as a reference for future research in this direction. The aim of this review is to highlight the value in the supramolecular photochemistry approach to tapping the unexploited technological potential within this historic reaction.

Heterogeneous singlet oxygen generation: in-operando visible light EPR spectroscopy

The use of photosensitizers immobilized on mesoporous materials to produce singlet oxygen (¹O₂) has opened a new way to synthetic and environmental applications due to the fast development of flow photochemistry and continuous-flow microreactors. ¹O₂-based photosensitized processes can be employed for the degradation of organic pollutants in an aqueous medium and the photosensitizer can be covalently attached to the support and separated from the effluent reducing the environmental impact. The aim of the present paper is to evaluate the ¹O₂ generation of Rose Bengal (RB) in homogeneous and heterogeneous systems using in-operando evaluation. Mesoporous SiO₂ nanoparticles (MSNs) were successfully conjugated with RB (MSN-RB) and electron paramagnetic resonance (EPR) spectroscopy in combination with the spin trap TEMP was employed to obtain paramagnetic TEMPO via generated ¹O₂ when RB or MSN-RB are exposed to visible light. Additionally, EPR/DMPO was used to exclude the possible generation of other reactive oxygen species (ROS) by the functionalized nanoparticles. We found that in situ ¹O₂ generation was enhanced when the same amount of RB is immobilized inside of mesoporous SiO₂.

Evolution of Singlet Oxygen by Activating Peroxydisulfate and Peroxymonosulfate: A Review

Advanced oxidation processes (AOPs) based on peroxydisulfate (PDS) or peroxymonosulfate (PMS) activation have attracted much research attention in the last decade for the degradation of recalcitrant organic contaminants. Sulfate (SO₄^•−) and hydroxyl (^•OH) radicals are most frequently generated from catalytic PDS/PMS decomposition by thermal, base, irradiation, transition metals and carbon materials. In addition, increasingly more recent studies have reported the involvement of singlet oxygen (¹O₂) during PDS/PMS-based AOPs. Typically, ¹O₂ can be produced either along with SO₄^•− and ^•OH or discovered as the dominant reactive oxygen species (ROSs) for pollutants degradation. This paper reviews recent advances in ¹O₂ generation during PDS/PMS activation. First, it introduces the basic chemistry of ¹O₂, its oxidation properties and detection methodologies. Furthermore, it elaborates different activation strategies/techniques, including homogeneous and heterogeneous systems, and discusses the possible reaction mechanisms to give an overview of the principle of ¹O₂ production by activating PDS/PMS. Moreover, although ¹O₂ has shown promising features such as high degradation selectivity and anti-interference capability, its production pathways and mechanisms remain controversial in the present literatures. Therefore, this study identifies the research gaps and proposes future perspectives in the aspects of novel catalysts and related mechanisms.

Peroxydisulfate Activation and Singlet Oxygen Generation by Oxygen Vacancy for Degradation of Contaminants

Oxygen vacancies (OVs) play a crucial role in the catalytic activity of metal-based catalysts; however, their activation mechanism toward peroxydisulfate (PDS) still lacks reasonable explanation. In this study, by taking bismuth bromide (BiOBr) as an example, we report an OV-mediated PDS activation process for degradation of bisphenol A (BPA) employing singlet oxygen (¹O₂) as the main reactive species under alkaline conditions. The experimental results show that the removal efficiency of BPA is proportional to the number of OVs and is highly related to the dosage of PDS and the catalyst. The surface OVs of BiOBr provide ideal sites for the inclusion of hydroxyl ions (HO^-) to form Bi^III-OH species, which are regarded as the major active sites for the adsorption and activation of PDS. Unexpectedly, the activation of PDS occurs through a nonradical mechanism mediated by ¹O₂, which is generated via multistep reactions, involving the formation of an intermediate superoxide radical (O₂^•-) and the redox cycle of Bi(III)/Bi(IV). This work is dedicated to the in-depth mechanism study into PDS activation over OV-rich BiOBr samples and provides a novel perspective for the activation of peroxides by defective materials in the absence of additional energy supply or aqueous transition metal ions.

Janus electrocatalytic flow-through membrane enables highly selective singlet oxygen production

The importance of singlet oxygen (1O2) in the environmental and biomedical fields has motivated research for effective 1O2 production. Electrocatalytic processes hold great potential for highly-automated and scalable 1O2 synthesis, but they are energy- and chemical-intensive. Herein, we present a Janus electrocatalytic membrane realizing ultra-efficient 1O2 production (6.9 mmol per m3 of permeate) and very low energy consumption (13.3 Wh per m3 of permeate) via a fast, flow-through electro-filtration process without the addition of chemical precursors. We confirm that a superoxide-mediated chain reaction, initiated by electrocatalytic oxygen reduction on the cathodic membrane side and subsequently terminated by H2O2 oxidation on the anodic membrane side, is crucial for 1O2 generation. We further demonstrate that the high 1O2 production efficiency is mainly attributable to the enhanced mass and charge transfer imparted by nano- and micro-confinement effects within the porous membrane structure. Our findings highlight a new electro-filtration strategy and an innovative reactive membrane design for synthesizing 1O2 for a broad range of potential applications including environmental remediation.

Highly Selective Oxidation of Organic Sulfides by a Conjugated Polymer as the Photosensitizer for Singlet Oxygen Generation

A cationic conjugated polyelectrolyte PPET3-N2 was used as a photosensitizer for photocatalytic oxidation of organic sulfides, including thioanisole, ethyl phenyl sulfide, 4-methylphenyl methyl sulfide, etc., to form sulfoxides with good yields and high selectivity. Oxidation reactions were performed in both batch and microfluidic reactors, where the microfluidic reactor can significantly promote the conversion of photocatalytic oxidation reaction to over 98% in about 8 min. Further studies of the photocatalytic oxidation of the antitumor drug ricobendazole in the microfluidic reactor demonstrate the potential application of the polymer material in organic reactions given its high selectivity, good efficiency, and operation convenience.

Enhancing Singlet Oxygen Generation in Conjugates of Silicon Nanocrystals and Organic Photosensitizers

Silicon nanocrystals (SiNCs) are regarded as a green and environmentally friendly material when compared with other semiconductor nanocrystals. Ultra-small SiNCs (with the size 4.6-5.2 nm) demonstrate strong UV absorption and photoluminescence in the near infrared (NIR) range with the high photoluminescence quantum yield (PLQY) up to 60%. In contrast to nanoporous silicon, ultra-small SiNCs do not possess an intrinsic ability to generate singlet oxygen (1O2). However, we demonstrate that SiNC-dye conjugates synthesized via microwave assistant hydrosilylation reaction produce 1O2 with moderate quantum yield (ΦΔ) up to 27% in cyclohexane. These interesting results were obtained via measurements of singlet oxygen phosphorescence at 1,270 nm. SiNCs play an important role in the production of singlet oxygen as SiNCs harvest UV and blue radiation and transfer absorbed energy to a triplet state of the attached dyes. It increases the population of the triplet states and leads to the enhancement of the singlet oxygen generation. Simultaneously, the SiNC-dye conjugates demonstrate NIR luminescence with the PLQY up to 22%. Thus, the luminescence behavior and photosensitizing properties of the SiNC-dye conjugates can attract interest as a new multifunctional platform in the field of bio-applications.

Nanomolecular singlet oxygen photosensitizers based on hemiquinonoid-resorcinarenes, the fuchsonarenes

Singlet oxygen sensitization involving a class of hemiquinonoid-substituted resorcinarenes prepared from the corresponding 3,5-di-t-butyl-4-hydroxyphenyl-substituted resorcinarenes is reported. Based on variation in the molecular structures, quantum yields comparable with that of the well-known photosensitizing compound meso-tetraphenylporphyrin were obtained for the octabenzyloxy-substituted double hemiquinonoid resorcinarene reported herein. The following classes of compounds were studied: benzyloxy-substituted resorcinarenes, acetyloxy-substituted resorcinarenes and acetyloxy-substituted pyrogallarenes. Single crystal X-ray crystallographic analyses revealed structural variations in the compounds with conformation (i.e., rctt, rccc, rcct) having some influence on the identity of hemiquinonoid product available. Multiplicity of hemiquinonoid group affects singlet oxygen quantum yield with those doubly substituted being more active than those containing a single hemiquinone. Compounds reported here lacking hemiquinonoid groups are inactive as photosensitizers. The term 'fuchsonarene' (fuchson + arene of resorcinarene) is proposed for use to classify the compounds.

Highly efficient oxygen photosensitization of carbon dots: the role of nitrogen doping

The role of nitrogen doping in the highly efficient oxygen photosensitization of carbon dots is underlined.

Organo metal halide perovskites effectively photosensitize the production of singlet oxygen (1Δg)

Using the steady state and time resolved NIR emission and specific chemical trapping techniques, we show for the first time that metal halide perovskite quantum dots can effectively generate singlet oxygen with a quantum yield of up to 0.34, the highest among nano semiconductor/nano metal singlet oxygen photosensitizers. The mechanism is concluded to be due to energy transfer from triplet excitons to molecular oxygen.

Water Disinfection by Immobilized Photosensitizers

Fresh water shortage has become a global problem. A partial solution for this problem is the use of treated and disinfected wastewater for irrigation. However, most existing wastewater disinfection methods are based on the use of aggressive chemicals or power-consuming physical processes. Photodynamic eradication of waterborne bacteria by immobilized photosensitizers may be a good alternative to conventional methods. In the present work, the photosensitizers Rose Bengal sodium salt, Rose Bengal lactone, methylene blue, and hematoporphyrin were immobilized in polyethylene or polypropylene using a “green” method of co-extrusion, without addition of any chemicals, yielding polymeric strips and beads containing the photosensitizers. The antibacterial efficiency of these immobilized photosensitizers was tested against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli in batch and continuous regimes upon illumination with a white luminescent lamp. All examined photosensitizers demonstrated a good ability to decrease the bacterial concentration, up to their total eradication. Immobilized photosensitizers are proposed for batch or continuous disinfection of wastewater after secondary treatment.

Edible Dye-Enhanced Solar Disinfection with Safety Indication

The rural developing world faces disproportional inequity in drinking water access, where point-of-use water treatment technologies often fail to achieve adequate levels of pathogen removal, especially for viruses. Solar disinfection (SODIS) is practiced because of its universal applicability and low implementation cost, though the excessively long treatment time and lack of safety indication hinder wider implementation. This study presents an enhanced SODIS scheme that utilizes erythrosine-a common food dye-as a photosensitizer to produce singlet oxygen for virus inactivation and to indicate the completion of water disinfection through photobleaching color change. Experimental results and predictions based on global solar irradiance data suggest that over 99.99% inactivation could be achieved within 5 min in the majority of developing countries, reducing the time for SODIS by 2 orders of magnitude. Preserving the low cost of traditional SODIS, erythrosine embodies edible dye-enhanced SODIS, an efficient water disinfection method that could potentially be used by governments and non-governmental organizations to improve drinking water quality in rural developing communities.