Subcritical water as reaction environment: fundamentals of hydrothermal biomass transformation

Isolation of Highly Crystalline Cellulose via Combined Pretreatment/Fractionation and Extraction Procedures within a Biorefinery Concept

Sustainable production of bio-based materials and chemicals requires integrated approaches which utilize all fractions of lignocellulosic biomass. In this work, highly crystalline cellulose was isolated via combined pretreatment/fractionation and extraction processes from beechwood sawdust. The proposed approach was based on the selective recovery of hemicellulose components in the first step, followed by enhanced delignification in the second step, permitting the efficient recovery of the remaining cellulose via bleaching in the final step. Hydrothermal pretreatment under tailored conditions in neat water or dilute acid resulted in almost complete hemicellulose removal (80-96 wt %) in the liquid fraction. In the second step, the formed surface lignin was isolated via mild extraction while enhanced removal of both native/structural and surface lignin (71 wt %) was achieved by applying the organosolv treatment using dilute sulfuric acid as catalyst. Dilute sulfuric acid pretreatment followed by acid catalyzed organosolv pretreatment proved to be the most efficient combined approach, leading to 80 wt % hemicellulose removal as xylose monomer, and 71 wt % delignification. High crystallinity cellulose (<88%), with an overall cellulose recovery of 68-91 wt % based on native cellulose in parent biomass was isolated in the last step via bleaching of all pretreated biomass solids. The proposed integrated biorefinery procedures that aim to whole "waste" biomass valorization, replacing fossil resources, with the use of green solvents (water, ethanol) at relatively mild temperature/pressure conditions, are in line with the scope of several United Nations Sustainable Development Goals, such as UN SDG 8, 11, 12, and 13.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

Comprehensive Assessment of Polysaccharides Extracted from Squash by Subcritical Water under Different Conditions

The effects of subcritical water microenvironment on the physiochemical properties, antioxidant activity and in vitro digestion of polysaccharides (SWESPs) from squash were investigated. After single-factor experiments, twenty samples were successfully prepared at different extraction temperatures (110, 130, 150, 170 and 190 °C) and extraction times (4, 8, 12 and 16 min). Under a low temperature environment, the whole process was mainly based on the extraction of SWESP. At this time, the color of SWESP was white or light gray and the molecular mass was high. When the temperature was 150 °C, since the extraction and degradation of SWESP reached equilibrium, the maximum extraction rate (18.67%) was reached at 150 °C (12 min). Compared with traditional methods, the yield of squash SWESP extracted by subcritical water was 3-4 times higher and less time consuming. Under high temperature conditions, SWESPs were degraded and their antioxidant capacity and viscosity were reduced. Meanwhile, Maillard and caramelization reactions turned the SWESPs yellow-brown and produced harmful substances. In addition, different SWESPs had different effects on in vitro digestion. In brief, SWESPs prepared under different conditions have different structures and physicochemical properties, allowing the obtainment of the required polysaccharide. Our results show that squash polysaccharides prepared in different subcritical water states had good development potential and application in the food industry.

Kappaphycus alvarezii as a renewable source of kappa-carrageenan and other cosmetic ingredients

Kappa-carrageenan is one of the most traded marine-derived hydrocolloids used in the food-and-beverage, pharmaceuticals, and personal care/cosmetics industries. K. alvarezii (previously known as Kappaphycus alvarezii) is arguably the most important natural producer based on annual production size and near-homogeneity of the product (i.e., primarily being the kappa-type). The anticipated expansion of the kappa-carrageenan market in the coming years could easily generate >100,000 MT of residual K. alvarezii biomass per year, which, if left untreated, can severely affect the environment and economy of the surrounding area. Among several possible valorization routes, turning the biomass residue into anti-photoaging cosmetic ingredients could potentially be the most sustainable one. Not only optimizing the profit (thus better ensuring economic sustainability) relative to the biofuels- and animal feed-routes, the action could also promote environmental sustainability. It could reduce the dependency of the current cosmetic industry on both petrochemicals and terrestrial plant-derived bioactive compounds. Note how, in contrast to terrestrial agriculture, industrial cultivation of seaweeds does not require arable land, freshwater, fertilizers, and pesticides. The valorization mode could also facilitate the sequestration of more greenhouse gas CO2 as daily-used chemicals, since the aerial productivity of seaweeds is much higher than that of terrestrial plants. This review first summarizes any scientific evidence that K. alvarezii extracts possess anti-photoaging properties. Next, realizing that conventional extraction methods may prevent the use of such extracts in cosmetic formulations, this review discusses the feasibility of obtaining various K. alvarezii compounds using green methods. Lastly, a perspective on several potential challenges to the proposed valorization scheme, as well as the potential solutions, is offered.

Theoretical study on the degradation mechanism of perfluoro-ethanesulfonic acid under subcritical hydrothermal alkaline conditions

Perfluorosulfonic acid, a widely recognized persistent organic pollutant, has attracted significant attention due to its severe environmental contamination, necessitating urgent resolution. To discover effective degradation strategies, this study implemented density functional theory, utilizing Gaussian 09 software with the WB97XD/6-311++G(2d,2p)//CCSD(T)/6-311++G(2df,2p) computational approach to conduct an in-depth reaction pathway analysis of perfluoroethane sulfonic acid (PFEtS) under subcritical hydrothermal alkaline conditions. It was revealed that PFEtS exhibits an uneven electron density distribution along the carbon chain backbone, with the bond energy of the C2-F4 bond being the lowest, followed by the C1-F1 bond, and the S-C1 bond energy being lower than those of C1-C2 and C-F bonds, rendering it susceptible to breakage. Based on these observations, seven potential degradation pathways of PFEtS were proposed under subcritical hydrothermal alkaline conditions, following optimization, and five reaction pathways have been identified. The degradation process unfolds in two stages. Initially, hydroxyl groups replace the sulfonate in PFEtS to form perfluoroethanol. Subsequently, full mineralization is achieved under alkaline conditions. The most probable reaction pathway involves hydroxyl groups attacking the C1 position, resulting in the generation of CO2 and inorganic fluoride ions. The first step of the reaction is the rate-determining step, with a theoretical rate constant calculated to be 8.41 × 10-5 L mol-1 s-1. This theoretical value is in close agreement with the experimentally determined degradation rate constant of perfluorooctane sulfonate under identical conditions, which is 8.67 × 10-4 L mol-1 s-1. This finding corroborates the experimental observation that longer-chain perfluoro-sulfonates degrade faster than their shorter-chain counterparts.

The key role of pretreatment for the one-step and multi-step conversions of European lignocellulosic materials into furan compounds

Nowadays, an increased interest from the chemical industry towards the furanic compounds production, renewable molecules alternatives to fossil molecules, which can be transformed into a wide range of chemicals and biopolymers. These molecules are produced following hexose and pentose dehydration. In this context, lignocellulosic biomass, owing to its richness in carbohydrates, notably cellulose and hemicellulose, can be the starting material for monosaccharide supply to be converted into bio-based products. Nevertheless, processing biomass is essential to overcome the recalcitrance of biomass, cellulose crystallinity, and lignin crosslinked structure. The previous reports describe only the furanic compound production from monosaccharides, without considering the starting raw material from which they would be extracted, and without paying attention to raw material pretreatment for the furan production pathway, nor the mass balance of the whole process. Taking account of these shortcomings, this review focuses, firstly, on the conversion potential of different European abundant lignocellulosic matrices into 5-hydroxymethyl furfural and 2-furfural based on their chemical composition. The second line of discussion is focused on the many technological approaches reported so far for the conversion of feedstocks into furan intermediates for polymer technology but highlighting those adopting the minimum possible steps and with the lowest possible environmental impact. The focus of this review is to providing an updated discussion of the important issues relevant to bringing chemically furan derivatives into a market context within a green European context.

One-Pot Biosynthesis of Carbon-Coated Silver Nanoparticles Using Palm Leaves as a Reductant and a Carbon Source

In this study, carbon-coated silver nanoparticles (Ag@C NPs) were synthesized with a one-pot hydrothermal method using palm leaves as a reductant and a carbon source. SEM, TEM, XRD, Raman, and UV-vis analyses were employed to characterize the as-prepared Ag@C NPs. Results showed that the diameter of silver nanoparticles (Ag NPs) and the coating thickness could be controlled by changing the amount of biomass and the reaction temperature. The diameter ranged from 68.33 to 143.15 nm, while the coating thickness ranged from 1.74 to 4.70 nm. As the biomass amount and the reaction temperature increased, the diameter of Ag NPs and the coating thickness became larger. Thus, this work provided a green, simple, and feasible method for the preparation of metal nanocrystals.

Biomass carbon mining to develop nature-inspired materials for a circular economy

A transition from a linear to a circular economy is the only alternative to reduce current pressures in natural resources. Our society must redefine our material sources, rethink our supply chains, improve our waste management, and redesign materials and products. Valorizing extensively available biomass wastes, as new carbon mines, and developing biobased materials that mimic nature's efficiency and wasteless procedures are the most promising avenues to achieve technical solutions for the global challenges ahead. Advances in materials processing, and characterization, as well as the rise of artificial intelligence, and machine learning, are supporting this transition to a new materials' mining. Location, cultural, and social aspects are also factors to consider. This perspective discusses new alternatives for carbon mining in biomass wastes, the valorization of biomass using available processing techniques, and the implementation of computational modeling, artificial intelligence, and machine learning to accelerate material's development and process engineering.

Recent advances toward structural incorporation for stabilizing heavy metal contaminants: A critical review

Heavy metal pollution has resulted in serious environmental damage and raised significant public health concerns. One potential solution in terminal waste treatment is to structurally incorporate and immobilize heavy metals in some robust frameworks. Yet extant research offers a limited perspective on how metal incorporation behavior and stabilization mechanisms can effectively manage heavy metal-laden waste. This review sets forth detailed research on the feasibility of treatment strategies to incorporate heavy metals into structural frameworks; this paper also compares common methods and advanced characterization techniques for identifying metal stabilization mechanisms. Furthermore, this review analyses the typical hosting structures for heavy metal contaminants and metal incorporation behavior, highlighting the importance of structural features on metal speciation and immobilization efficiency. Lastly, this paper systematically summarizes key factors (i.e., intrinsic properties and external conditions) affecting metal incorporation behavior. Drawing on these impactful findings, the paper discusses future directions in the design of waste forms that efficiently, effectively treat heavy metal contaminants. By examining tailored composition-structure-property relationships in metal immobilization strategies, this review reveals possible solutions for crucial challenges in waste treatment and enhances the development of structural incorporation strategies for heavy metal immobilization in environmental applications.

Subcritical hydrothermal oxidation of semi-dry ash from iron ore sintering flue gas desulfurization: Experimental and kinetic studies

Realization of low temperature and high efficiency oxidation of CaSO₃ is the key to solve the issue of ecological hazards caused by semi-dry sintering flue gas desulfurization ash. The subcritical hydrothermal technology was employed for the oxidation of CaSO₃, achieving 89.83% of CaSO₃ at 180 °C, 2 MPa for 120 min with a solid-to-liquid ratio of 1:20. The macroscopic oxidation kinetics of CaSO₃ in the subcritical hydrothermal reaction system was investigated. A mathematical model was established, incorporating the intrinsic reaction, CaSO₃ dissolution, oxygen diffusion and CaSO₄ precipitation. It was concluded that the macroscopic oxidation of CaSO₃ was co-controlled by the oxygen diffusion and CaSO₄ precipitation. Subcritical hydrothermal technology promises not only higher efficiency, but more importantly, potentially "one-step" preparation of CaSO₄ whiskers, enabling cost-effective and high value-added resource utilization of the semi-dry FGD ash.

Subcritical Water Pretreatment for Anaerobic Digestion Enhancement: A Review

This work reviews hydrothermal subcritical water pretreatment to enhance biogas production through anaerobic digestion. The complexity of the lignocellulosic structure has been the main limitation contributing to unsatisfactory biogas production throughout the anaerobic digestion. The high resistance of the structure to biological hydrolysis has increased the interest in applying pretreatment prior to anaerobic digestion to facilitate hydrolysis. Hydrothermal subcritical water technology, an environmentally friendly pretreatment that uses water as the main medium, is gaining prominence in biogas enhancement. However, the subcritical water pretreatment influence on structural properties, biogas production, and the production of anaerobic process inhibitors signifies a knowledge gap and needs an evaluation. This review presents the need for pretreatment reaction and properties in the subcritical water region, biogas production from subcritical water pre-treated waste, production of inhibitors, and its challenges are discussed. This pretreatment could be a promising option and further enhance biogas production throughout the anaerobic digestion process.

Review of chemical pretreatment of lignocellulosic biomass using low-liquid and low-chemical catalysts for effective bioconversion

Chemical pretreatment of lignocellulosic biomass (LCB) is essential for effective biological conversion in subsequent steps to produce biofuels or biochemicals. For effective pretreatment, high lignin content and its recalcitrant nature of LCB are major factors influencing bioconversion, especially lignin is known to be effectively solubilized by alkaline, organic, and deep eutectic solvents, ionic liquids, while hemicellulose is effectively dissolved by various acid catalysts and organic solvents. Depending on the pretreatment method/catalyst used, different pretreatment process scheme should be applied with different amounts of catalyst and water inputs to achieve a satisfactory effect. In addition, the amount of processing water required in the following processes such as washing, catalyst recovery, and conditioning after pretreatment is critical factor for scale-up (commercialization). In this review, the amount of catalyst and/or water used, and the effect of pretreatment, properties of the products, and recovery of liquid are also discussed.

Novel strategy in biohydrogen energy production from COVID - 19 plastic waste: A critical review

Usage of plastics in the form of personal protective equipment, medical devices, and common packages has increased alarmingly during these pandemic times. Though they have served as an excellent protection source in minimizing the coronavirus disease (COVID-19) spreading, they have still emerged as major environmental pollutants nowadays. These non-degradable COVID-19 plastic wastes (CPW) were treated through incineration and landfilling process, which may lead to either the release of harmful gases or contaminating the surrounding environment. Further, they can cause numerous health hazards to the human and animal populations. These plastic wastes can be efficiently managed through thermochemical processes like pyrolysis or gasification, which assist in degrading the plastic waste and also effectively convert them into useful energy-yielding products. The pyrolysis process promotes the formation of liquid fuels and chemicals, whereas gasification leads to syngas and hydrogen fuel production. These energy-yielding products can help to compensate for the fossil fuels depletion in the near future. There are many insights explained in terms of the types of reactors and influential factors that can be adopted for the pyrolysis and gasification process, to produce high efficient energy products from the wastes. In addition, advanced technologies including co-gasification and two-stage gasification were also reviewed.

Recent advances on PFAS degradation via thermal and nonthermal methods

Per- and polyfluoroalkyl substances (PFAS) are a set of synthetic chemicals which contain several carbon-fluorine (C-F) bonds and have been in production for the past eight decades. PFAS have been used in several industrial and consumer products including nonstick pans, food packaging, firefighting foams, and carpeting. PFAS require proper investigations worldwide due to their omnipresence in the biotic environment and the resulting pollution to drinking water sources. These harmful chemicals have been associated with adverse health effects such as liver damage, cancer, low fertility, hormone subjugation, and thyroid illness. In addition, these fluorinated compounds show high chemical, thermal, biological, hydrolytic, photochemical, and oxidative stability. Therefore, effective treatment processes are required for the removal and degradation of PFAS from wastewater, drinking water, and groundwater. Previous review papers have provided excellent summaries on PFAS treatment technologies, but the focus has been on the elimination efficiency without providing mechanistic understanding of removal/degradation pathways. The present review summarizes a comprehensive examination of various thermal and non-thermal PFAS destruction technologies. It includes sonochemical/ultrasound degradation, microwave hydrothermal treatment, subcritical or supercritical treatment, electrical discharge plasma technology, thermal destruction methods/incinerations, low/high-temperature thermal desorption process, vapor energy generator (VEG) technology and mechanochemical destruction. The background, degradation mechanisms/pathways, and advances of each remediation process are discussed in detail in this review.

Review: Hydrothermal treatment of per- and polyfluoroalkyl substances (PFAS)

PER: and polyfluoroalkyl substances (PFAS) are a concerning and unique class of environmentally persistent contaminants with biotoxic effects. Decades of PFAS discharge into water and soil resulted in PFAS bioaccumulation in plants, animals, and humans. PFAS are very stable, and their treatment has become a global environmental challenge. Significant efforts have been made to achieve efficient and complete PFAS mineralization using existing and emerging technologies. Hydrothermal treatments in subcritical and supercritical water have emerged as promising end-of-life PFAS destruction technologies, attracting the attention of scholars, industry, and key stakeholders. This paper reviews the state-of-the-art research on the behavior of PFAS, PFAS precursors, PFAS alternatives, and PFAS-containing waste in hydrothermal processes, including the destruction and defluorination efficiency, the proposed reaction mechanisms, and the environmental impact of these treatments. Scientific literature shows that >99% degradation and >60% defluorination of PFAS can be achieved through subcritical and supercritical water processing. The limitations of current research are evaluated, special considerations are given to the challenges of technology maturation and scale-up from laboratory studies to large-scale industrial application, and potential future technological developments are proposed.

Effects of hydrophobic coating on properties of hydrochar produced at different temperatures: Specific surface area and oxygen-containing functional groups

Hydrochar's specific surface area (SSA) is important in environmental remediation; however, a hydrophobic coating formed on hydrochar creates a physical barrier that reduces that SSA. The formation and composition of the hydrophobic coating and its effects on hydrochar properties are unclear. In this study, hydrochar was produced from Chinese fan palm (Livistona chinensis) leaves at different temperatures. The resulting hydrophobic coatings were investigated by in situ characterization and then extracted with acetone for composition identification. Additionally, hydrochar properties were compared before and after hydrophobic coating removal. The results showed that the hydrophobic coating of the hydrochar produced at 180 °C was the insoluble cuticle layer of raw biomass, while the hydrophobic coatings formed above 180 °C were the depolymerization products of cutin. For the hydrochar above 180 °C, especially at 260 °C, the removal of the hydrophobic coating from hydrochar increased both its SSA and its oxygen-containing functional groups.

Extraction of Phytochemicals from Maypole Apple by Subcritical Water

The Maypole apple is a new, promising species of small apples with a prominent flavor and deep red flesh and peel. This study divided Maypole apples into outer flesh, inner flesh, and peel, and used subcritical water at 100–175 °C for 10–30 min to extract various phytochemicals (procyanidin B2 (PB2), 5-caffeoylquinic acid (5CQA), and epicatechin). The obtained Maypole apple extracts and extraction residues in this work were analyzed using a SEM, HPLC, FT-IR, and UV-Vis spectrophotometer. Under different subcritical water extraction conditions, this work found the highest extraction rate: to be PB2 from the peel (4.167 mg/mL), 5CQA (2.296 mg/mL) and epicatechin (1.044 mg/mL) from the inner flesh. In addition, this work regressed the quadratic equations of the specific yield through ANOVA and found that temperature is a more significant affecting factor than extraction time. This aspect of the study suggests that phytochemicals could be obtained from the Maypole apple using the new extraction method of subcritical water.

Systematic evaluation on the physicochemical characteristics of a series polysaccharides extracted from different edible lilies by ultrasound and subcritical water

A series polysaccharide samples extracted from three edible lilies (Lilium davidii var. willmottiae, Lilium brownii var. viridulum, and Lilium lancifolium) by subcritical water and ultrasound-assisted extraction were systematically compared. The results showed that extraction method was a more important factor than lily species. Subcritical water extracted lily polysaccharides (S-LP) with higher yield, molecular weight, neutral glucose and uronic acid content as well as apparent viscosity. Ultrasound-assisted extracted lily polysaccharides (U-LP) with higher reducing sugars and protein content. Moreover, due to the degradation of glycosidic bonds, ultrasonic extraction was easier to obtain lower molecular weight polysaccharides. In addition, the extraction method significantly affected the monosaccharide proportion of polysaccharides, but had no effect on type. Glucose was the main component in S-LP, and glucose and mannose were the main components in U-LP. The micromorphology of different polysaccharide samples was similar, and the scanning electron microscope (SEM) images showed regular/irregular particle clusters with different particle sizes. Overall, the relationships between extraction methods, lily species and polysaccharide properties were preliminarily elucidated, providing a reference for the targeted extraction of specific lily polysaccharides (LP).

Recovery of sugars and amino acids from brewers' spent grains using subcritical water hydrolysis in a single and two sequential semi-continuous flow-through reactors

This study evaluated the subcritical water hydrolysis (SWH) of brewer's spent grains (BSG) to obtain sugars and amino acids. The experimental conditions investigated the hydrolysis of BSG in a single flow-through reactor and in two sequential reactors operated in semi-continuous mode. The hydrolysis experiments were carried out for 120 min at 15 MPa, 5 mL water min^-1, at different temperatures (80 - 180 °C) and using an S/F of 20 and 10 g solvent g^-1 BSG, for the single and two sequential reactors, respectively. The highest monosaccharide yields were obtained at 180 °C in a single reactor (47.76 mg g^-1 carbohydrates). With these operational conditions, the hydrolysate presented xylose (0.477 mg mL^-1) and arabinose (1.039 mg mL^-1) as main sugars, while low contents of furfural (310.7 µg mL^-1), 5-hydroxymethylfurfural (<1 mg L^-1), and organic acids (0.343 mg mL^-1) were obtained. The yield of proteins at 180 °C in a process with a single reactor was 43.62 mg amino acids g^-1 proteins, where tryptophan (215.55 µg mL^-1), aspartic acid (123.35 µg mL^-1), valine (64.35 µg mL^-1), lysine (16.55 µg mL^-1), and glycine (16.1 µg mL^-1) were the main amino acids recovered in the hydrolysate. In conclusion, SWH pretreatment is a promising technology to recover bio-based compounds from BSG; however, further studies are still needed to increase the yield of bioproducts from lignocellulosic biomass to explore two sequential reactors.

One-Step Synthesis of Iron and Titanium-Based Compounds Using Black Mineral Sands and Oxalic Acid under Subcritical Water Conditions

Black mineral sands are widely used to obtain titanium dioxide, titanium, and, more recently, a variety of iron–titanium oxide nanostructures. Highly corrosive mineral acids or alkalis are commonly employed for this purpose. Hence, it is desirable to find eco-friendly ways to process these minerals, deriving high-added value materials. In this study, an Ecuadorian mineral sand precursor (0.6FeTiO3∙0.4Fe2O3 solid solution) was treated with oxalic acid aqueous solutions under subcritical water conditions. The synthesis was conducted in a batch reactor operating at 155 °C, 50 bar, and 700 rpm for 12 h, varying the oxalic acid concentration (0.1, 0.5 to 1.0 M). The as-obtained compounds were physically separated, dried, and analyzed by X-ray powder diffraction, scanning electron microscopy, and Raman spectroscopy. The characterization showed that the precursor was completely converted into two main products, ferrous oxalate, and titanium dioxide polymorphs. Rutile was always found in the as-synthesized products, while anatase only crystallized with high oxalic acid concentrations (0.5 and 1.0 M). These results open the possibility to develop more sustainable routes to synthesize iron and titanium-based materials with promising applications.

Hydrothermal treatment as a complementary tool to control the invasive Pampas grass (Cortaderia selloana)

The rapid spread of invasive Pampas grass (PG) is having not only ecosystems impact, but also significant economic and social effects. The tonnes of bulky waste from the plant disposal require proper treatment to avoid seed dispersal, greenhouse gas emissions and landscape damage. In the pursuit of zero-waste management, hydrothermal treatment (HT) appears as a challenging alternative. The possibility of mobile HT systems offers an alternative to accomplish on-site both the PG waste management and the application of the resulting by-products within a circular framework. As a first step, this research shows that, without a prior drying step, the hydrothermal treatment at 100-230 °C under autogenous water vapor pressure for only 30 min allows safe seeds inertization, while a stable carbon-enriched solid and an aqueous stream are generated. Prolonging the process for 2 h has no profitable effects. As the reaction temperature increases, the PG residue is converted into a material with 49-58 wt% of carbon, 41-32 wt% of oxygen and 3-4 wt% of ash. The pH (~6.3), low electrical conductivity (1.21-0.86 dS/m), high carbon content, open porosity (5-8 m²/g) and improved performance in seed germination and in the early growth test suggest the potential of HT-solids derived at 100-120 °C as amendment to sequester carbon in the soil and improve its physico-biological properties. The phytotoxicity detected in the peat/lignite-like solids obtained at 200-230 °C limits its application in soil, but calorific values of 22-24 MJ/kg indicate their suitability as CO₂-neutral fuel. The agrochemical analysis of the liquid by-products indicates poor value on their own, but their use supplemented with compost may be an option.

Systematic evaluation of a series of pectic polysaccharides extracted from apple pomace by regulation of subcritical water conditions

To investigate the influences of different subcritical water conditions on apple pomace pectic polysaccharides (APP) extraction, 20 samples were successfully prepared and systematically analyzed. At low temperature region (100-120 °C), extraction effect was predominant and extracted APP was high molecular weight, esterification degree and galacturonic acid content as well as light color. At middle temperature region (140 °C), the balance of extraction and degradation effects was reached and led to the highest APP yield (14.89%). At high temperature region (160-180 °C), degradation effect was predominant and led to serious degradation of APP and more extraction of co-extracts, which endowed the APP with low viscosity and good antioxidant activities in vitro. Overall, the relationship between different subcritical water conditions and APP properties are preliminarily illuminated, which not only provides a promising way for directed extraction of specific APP, but also promotes the potential application of subcritical water to commercial pectin.

Evaluation of the Heat Produced by the Hydrothermal Liquefaction of Wet Food Processing Residues and Model Compounds

Hydrothermal liquefaction has proven itself as a promising pathway to the valorisation of low-value wet food residues. The chemistry is complex and many questions remain about the underlying mechanism of the transformation. Little is known about the heat of reaction, or even the thermal effects, of the hydrothermal liquefaction of real biomass and its constituents. This paper explores different methods to evaluate the heat released during the liquefaction of blackcurrant pomace and brewers’ spent grains. Some model compounds have also been evaluated, such as lignin, cellulose and glutamic acid. Exothermic behaviour was observed for blackcurrant pomace and brewers’ spent grains. Results obtained in a continuous reactor are similar to those obtained in a batch reactor. The heat release has been estimated between 1 MJ/kg and 3 MJ/kg for blackcurrant pomace and brewers’ spent grains, respectively. Liquefaction of cellulose and glucose also exhibit exothermic behaviour, while the transformation of lignin and glutamic acid present a slightly endothermic behaviour.

Mechanistic effects of solvent systems on the Ni–Sn-catalyzed hydrodeoxygenation of lignin derivatives to none-oxygenates

The influence of water on the organic reaction system and bimetallic Ni–Sn catalyst and the solvent property analysis of the cresol hydrodeoxygenation process to produce completely deoxidised product selective promoters.

Efficient Piancatelli rearrangement on a large scale using the Zippertex technology under subcritical water conditions

A series of furyl carbinols, which were directly obtained from a bio-sourced raw material, were efficiently transformed into cyclopentenone derivatives in good yields and on a large scale using the Zippertex technology under subcritical water conditions.

Changes and release risk of typical pharmaceuticals and personal care products in sewage sludge during hydrothermal carbonization process

Hydrochars were obtained by hydrothermal carbonization treatment of municipal sewage sludge. Effects of reaction temperature (180-300 °C) and reaction time (2-15 h) on structural characteristics of the hydrochars, and changes and release risk of typical pharmaceuticals and personal care products (PPCPs) in the hydrochars were investigated. Reaction temperature played a more important role than reaction time on hydrochar properties and decarboxylation reaction was the primary process during the converting of sludge to hydrochars. The sludge hydrochars had higher yields, carbon recovery rates, polarity and less aromaticity than biochars. Hydrothermal process reduced PPCPs' load in sludge hydrochars effectively except caffeine and acetaminophen. The hydrochars prepared at intermediate and high temperatures (240 and 300 °C) had higher caffeine concentrations than the original sludge, which can be ascribed to the transformation of N-containing precursors. The highest CaCl₂ extracted caffeine concentration occurred at intermediate temperature of 240 °C (48.1 μg/kg) due to the stronger affinity of caffeine in the high-temperature hydrochars. Caffeine was not detected in hydroxypropyl-β-cyclodextrin (HPCD) extract. Hydrochars prepared at low temperature (180 °C) had a higher acetaminophen concentration than the original sludge, which was attributed to the high thermal stability temperature of acetaminophen. Low- and intermediate-temperature hydrochars had higher CaCl₂ extracted acetaminophen concentrations. The HPCD extracted acetaminophen was low with a range of nd to 6.72 μg/kg. In conclusion, PPCPs are less likely to constitute a limiting factor on the farm application of sludge hydrochar. This study provides theoretical support for the safe application of sludge hydrochar in the farmland.

A Landscape of Lignocellulosic Biopolymer Transformations into Valuable Molecules by Heterogeneous Catalysis in C'Durable Team at IRCELYON

This review article highlights part of the research activity of the C’Durable team at IRCELYON in the field of sustainable chemistry. This review presents a landscape of the work performed on the valorization of lignocellulosic biopolymers. These studies intend to transform cellulose, hemicellulose and lignin into valuable molecules. The methodology usually consists in evaluating the behavior of the biopolymers in the absence of catalyst under various conditions (solvent, temperature), and then to assess the influence of a catalyst, most often a heterogeneous catalyst, on the reactivity. The most significant results obtained on the upgrading of cellulose and lignin, which have been mainly investigated in the team, will be presented with an opening on studies involving raw lignocellulose.

Protein Hydrolysis by Subcritical Water: A New Perspective on Obtaining Bioactive Peptides

The importance of bioactive peptides lies in their diverse applications in the pharmaceutical and food industries. In addition, they have been projected as allies in the control and prevention of certain diseases due to their associated antioxidant, antihypertensive, or hypoglycemic activities, just to mention a few. Obtaining these peptides has been performed traditionally by fermentation processes or enzymatic hydrolysis. In recent years, the use of supercritical fluid technology, specifically subcritical water (SW), has been positioned as an efficient and sustainable alternative to obtain peptides from various protein sources. This review presents and discusses updated research reports on the use of subcritical water to obtain bioactive peptides, its hydrolysis mechanism, and the experimental designs used for the study of effects from factors involved in the hydrolysis process. The aim was to promote obtaining peptides by green technology and to clarify perspectives that still need to be explored in the use of subcritical water in protein hydrolysis.

Process Analysis of Main Organic Compounds Dissolved in Aqueous Phase by Hydrothermal Processing of Açaí (Euterpe oleraceae, Mart.) Seeds: Influence of Process Temperature, Biomass-to-Water Ratio, and Production Scales

This work aims to systematically investigate the influence of process temperature, biomass-to-water ratio, and production scales (laboratory and pilot) on the chemical composition of aqueous and gaseous phases and mass production of chemicals by hydrothermal processing of Açaí (Euterpe oleraceae, Mart.) seeds. The hydrothermal carbonization was carried out at 175, 200, 225, and 250 °C at 2 °C/min and a biomass-to-water ratio of 1:10; at 250 °C at 2 °C/min and biomass-to-water ratios of 1:10, 1:15, and 1:20 in technical scale; and at 200, 225, and 250 °C at 2 °C/min and a biomass-to-water ratio of 1:10 in laboratory scale. The elemental composition (C, H, N, S) in the solid phase was determined to compute the HHV. The chemical composition of the aqueous phase was determined by GC and HPLC and the volumetric composition of the gaseous phase using an infrared gas analyzer. For the experiments in the pilot test scale with a constant biomass-to-water ratio of 1:10, the yields of solid, liquid, and gaseous phases varied between 53.39 and 37.01% (wt.), 46.61 and 59.19% (wt.), and 0.00 and 3.80% (wt.), respectively. The yield of solids shows a smooth exponential decay with temperature, while that of liquid and gaseous phases showed a smooth growth. By varying the biomass-to-water ratios, the yields of solid, liquid, and gaseous reaction products varied between 53.39 and 32.09% (wt.), 46.61 and 67.28% (wt.), and 0.00 and 0.634% (wt.), respectively. The yield of solids decreased exponentially with increasing water-to-biomass ratio, and that of the liquid phase increased in a sigmoid fashion. For a constant biomass-to-water ratio, the concentrations of furfural and HMF decreased drastically with increasing temperature, reaching a minimum at 250 °C, while that of phenols increased. In addition, the concentrations of CH3COOH and total carboxylic acids increased, reaching a maximum concentration at 250 °C. For constant process temperature, the concentrations of aromatics varied smoothly with temperature. The concentrations of furfural, HMF, and catechol decreased with temperature, while that of phenols increased. The concentrations of CH3COOH and total carboxylic acids decreased exponentially with temperature. Finally, for the experiments with varying water-to-biomass ratios, the productions of chemicals (furfural, HMF, phenols, cathecol, and acetic acid) in the aqueous phase is highly dependent on the biomass-to-water ratio. For the experiments at the laboratory scale with a constant biomass-to-water ratio of 1:10, the yields of solids ranged between 55.9 and 51.1% (wt.), showing not only a linear decay with temperature but also a lower degradation grade. The chemical composition of main organic compounds (furfural, HMF, phenols, catechol, and acetic acid) dissolved in the aqueous phase in laboratory-scale study showed the same behavior as those obtained in the pilot-scale study.

Improving nutrients removal and energy recovery from wastes using hydrochar

Hydrothermal carbonization (HTC) is an eco-friendly, flexible and efficient way to valorise wet solid wastes, producing a carbon-rich material named as hydrochar. Considerable efforts have been devoted to studying the feasibility of using hydrochar in waste management to achieve the goal of circular economy. However, a comprehensive evaluation of the impacts of hydrochar on energy recovery from anaerobic digestion (AD), nutrient reclamation, and wastewater treatment is currently lacking. To understand the influence of hydrochar type on its application, this review will firstly introduce the mechanisms and biomass treatment for hydrochar preparation. Most recent studies regarding the improvement of methane (CH₄) and volatile fatty acids (VFAs) production after dosing hydrochar in anaerobic digesters are quantitatively summarized and deeply discussed. The potential of using various hydrochar as slow-fertilizer to support the growth of plants are analysed by providing quantitative data. The usage of hydrochar in remediating pollutants from wastewater as effective adsorbent is also evaluated. Based on the review, we also address the challenges and demonstrate the opportunities for the future application of hydrochar in waste management. Conclusively, this review will not only provide a systematic understanding of the up-to-date developments of improving the nutrients removal and energy recovery from wastes by using hydrochar but also several new directions for the application of hydrochar in the future.

Hydrogen Generation from Wood Chip and Biochar by Combined Continuous Pyrolysis and Hydrothermal Gasification

Hydrothermal gasification (HTG) experiments were carried out to extract hydrogen from biomass. Although extensive research has been conducted on hydrogen production with HTG, limited research exists on the use of biochar as a raw material. In this study, woodland residues (wood chip) and biochar from wood-chip pyrolysis were used in HTG treatment to generate hydrogen. This research investigated the effect of temperature (300–425 °C) and biomass/water (0.5–10) ratio on gas composition. A higher temperature promoted hydrogen production because the water–gas shift reaction and steam-reforming reaction were promoted with an increase in temperature. The methane concentration was related positively to temperature because of the methanation and hydrogenation reactions. A lower biomass/water ratio promoted hydrogen production but suppressed carbon-monoxide production. Most reactions that produce hydrogen consume water, but water also affects the water–gas shift reaction balance, which decreases the carbon-monoxide concentration. By focusing on the practical application of HTG, we attempted biochar treatment by pyrolysis (temperature of heating part: 700 °C), and syngas was obtained from hydrothermal treatment above 425 °C.

Rational Functionalization Towards Redox-Active TEMPO Stable Free-Radical-Hydrochar Composites

Although both stable free organic radicals and biomass-derived hydrochars have emerged as appealing, green, multifunctional materials, their association has not been explored. In this study, strength is found to lie in their union, which primarily leads to stable redox-active free-radical-hydrochar composites that can generate unexpected opportunities for the development of advanced metal-free sustainable materials. The composites are obtained by a straightforward green one-pot hydrothermal procedure. The loading of stable free radicals of nitroxide type and their localization is engineered by the nature of the carbohydrate and the reaction status; vigorous reaction parameters promote faster nucleation and growth kinetics of the hydrochar products, leading to a covalent immobilization of redox species on the surface of the carbonaceous microspherical aggregates. The nitroxide free-radical-hydrochar materials demonstrate enhancements in terms of both electrocatalytic activity and capacitive features.

Hydrothermal liquefaction of wood chips under supercritical and subcritical water reaction conditions

This work describes batch-type hydrothermal liquefaction (HTL) treatments of conifer wood chips at 180–425 °C, under either air or nitrogen atmosphere. Such experiments allow efficient extraction of 5-hydroxymethyl furfural (HMF) and other valuable chemical substances, such as glycolic acid and acetic acid, from the lignocellulosic biomass. These compounds and their decomposition products present in the samples after HTL are analyzed and quantified using spectroscopic and chromatographic techniques. In general, the relatively higher-pressure nitrogen atmospheric condition is more suitable for obtaining the desired products, relative to the air atmosphere. Based on the quantitative results, the optimal temperatures for producing acetic acid, glycolic acid, and HMF are 300 °C, 250 °C, and 180 °C, respectively. The interesting relationship between HMF yield and temperature is also discussed; as the temperature increases, the yield of HMF first decreases and then increases. This phenomenon is explained by the exothermic nature of the HMF decomposition reaction, which is inhibited by excessively high temperature (in the range from 380 to 425 °C). At moderately high temperatures (optimized conditions; 300 °C), the generation rate of HMF exceeds its decomposition rate, resulting in a high yield of HMF. Based on the results of the experiments conducted in this study, the decomposition mechanism describing HTL treatment of wood chips can be elucidated. This study therefore provides guidance for future work involving HMF extraction from lignocellulosic biomass.

Hydrogen from Water is more than a Fuel: Hydrogenations and Hydrodeoxygenations for a Biobased Economy

Worldwide a hydrogen-based economy is on the political agenda. Its centre forms molecular hydrogen (H₂ ) that should serve mainly as energy carrier and fuel. However, currently and foreseeable in the future H₂ is playing its main role as reactant in the chemical industry. Electrolytic generation and storage of H₂ gas is energy demanding and may hardly become economically at the large scale. We argue that in the overall transition towards an economy that is based on biomolecules and CO₂ as carbon feedstock electrochemical hydrogenations and hydrodeoxygenations in aqueous solutions need to be moved in the centre. Departing from the well-known fact that electrochemistry allows creating reactive hydrogen species from water, i. e. hydrogen in statu nascendi (H^. ), at ambient temperature and pressure we illustrate the existing diversity of reactions based thereon. We focus on examples of model compounds from thermal biomass pretreatment and products from real thermal biomass pretreatment (bio-oil). Consequently, we advocate that electrochemical hydrogenations and hydrodeoxygenations have to be further explored and interweaved into existing process lines.

Integration of Air Classification and Hydrothermal Carbonization to Enhance Energy Recovery of Corn Stover

Air classification (AC) is a cost-effective technology that separates the energy-dense light ash fraction (LAF) from the inorganic-rich high ash fraction (HAF) of corn stover. HAF could be upgraded into energy-dense solid fuel by hydrothermal carbonization (HTC). However, HTC is a high-temperature, high-pressure process, which requires additional energy to operate. In this study, three different scenarios (i.e., AC only, HTC only, and integrated AC–HTC) were investigated for the energy recovery of corn stover. AC was performed on corn stover at an 8 Hz fan speed, which yielded 84.4 wt. % LAF, 12.8 wt. % HAF, and 2.8 wt. % below screen particles. About 27 wt. % ash was reduced from LAF by the AC process. Furthermore, HTC was performed on raw corn stover and the HAF of corn stover at 200, 230, and 260 °C for 30 min. To evaluate energy recovery, solid products were characterized in terms of mass yield, ash yield, ultimate analysis, proximate analyses, and higher heating value (HHV). The results showed that the energy density was increased with the increase in HTC temperature, meanwhile the mass yield and ash yield were decreased with the increase in HTC temperature. Proximate analysis showed that fixed carbon increased 18 wt. % for original char and 27 wt. % for HAF char at 260 °C, compared to their respective feedstocks. Finally, the hydrochar resulting from HAF was mixed with LAF and pelletized at 180 bar and 90 °C to densify the energy content. An energy balance of the integrated AC–HTC process was performed, and the results shows that integrated AC with HTC performed at 230 °C resulted in an additional 800 MJ/ton of energy recovery compared to the AC-only scenario.

Oxidative hydrothermal surface modification of activated carbon for sevoflurane removal

The emission of waste anaesthetic gas is a growing contributor to global warming and remains a factor in atmospheric ozone depletion. Volatile anaesthetics in medical waste gases could be removed via adsorption using suitable activated carbon materials possessing an enhanced affinity to anaesthetic molecules. In this work, the effects of surface physical and chemical properties on sevoflurane adsorption were investigated by oxidative hydrothermal surface modification of a commercial activated carbon using only distilled water. The hydrothermal surface modification was carried out at different treatment temperatures (150-300 °C) for varying durations (10-30 min), and adsorption was conducted under fixed conditions (bed depth = 10 cm, inlet concentration = 528 mg/L, and flow rate = 3 L/min). The hydrothermal treatment generally increased the BET surface area of the activated carbons. At oxidation temperatures above 200 °C, the micropore volume of the samples diminished. The relative amount of surface oxygen was enriched as the treatment temperature increased. Treatment duration did not significantly affect the introduction of relative amount of surface oxygen, except at higher temperatures. There were no new types of functional groups introduced. However, disappearance and re-formation of oxygen functional groups containing C-O structures (as in hydroxyl and ether groups) occurred when treatment temperature was increased from 150 to 200 °C, and when treatments were conducted above 200 °C, respectively. The ester/acetal groups were enriched under the temperature range studied. The findings suggested that the re-formation of surface oxygen functionalities might lead to the development of functional groups that improve sevoflurane adsorption.

Hydrothermal processing of a green seaweed Ulva sp. for the production of monosaccharides, polyhydroxyalkanoates, and hydrochar

In the fermentation and bioenergy industry, terrestrial biomass is usually fractionated and the collected components, such as starch, are processed separately. Such a separation has not been reported for seaweeds. In this work, the direct hydrothermal processing of the whole green seaweed Ulva sp. biomass is compared to processing of separated starch and cellulose, to find the preferable route for monosaccharide, hydrochar, and polyhydroxyalkanoates (PHA) production. Glucose was the major released monosaccharide. A significant share of the glucose yield comes from the starch fraction. The highest hydrochar yield with the lowest ash content was obtained from the separated cellulose fraction. The highest PHA yield was obtained using a whole Ulva sp. hydrolysate fermentation with Haloferaxmediterranei. Economic analysis shows the advantage of direct Ulva sp. biomass fermentation to PHA. The co-production of glucose and hydrochar does not add significant economic benefits to the process under plausible prices of the two outputs.

Hydrothermal carbonization of centrifuged sewage sludge: Determination of resource recovery from liquid fraction and thermal behaviour of hydrochar

Safe disposal of the sludge generated from sewage treatment plant is a major challenge worldwide. Hydrothermal carbonization (HTC) is considered a potential pretreatment alternative for sewage sludge to facilitate the improved resource recovery. In the present study, the mixed centrifuged sewage sludge (CSS) was subjected to the HTC pretreatment to determine characteristics of the solid hydrochar (HC) and liquid fraction (LF) with a purpose of energy recovery and extraction of value-added compounds, respectively. HTC was performed in a high pressure batch reactor at 200 °C temperature for 1-8 h duration. The HC produced after HTC resembled with the low quality peat coal whereas the LF contained value-added chemicals such as humic acid (HA) and phosphate phosphorous (PO₄^3-P). Using ammonium sulphate as 'salting out' agent, ~70% of the total HA (~15-16 g/L) could be recovered from the LF. Using the recovered HA, an improvement in the root and shoot lengths of the seeds could be observed. In the subsequent step, the total PO₄^3--P recovery of ~80% was obtained as struvite from the residual wastewater.

Valorization of Cork Using Subcritical Water

Granulated cork was submitted to subcritical water extraction/hydrolysis in a semi-continuous reactor at temperatures in the range of 120–200 °C and with a constant pressure of 100 bar. The influence of temperature on the composition of the cork extracts obtained was assessed—namely, their content of carbohydrates and phenolics. The extraction yield increased with the temperature, and this was associated with the decrease in the dielectric constant of water and the increase in its ionic product. Extracts composed of up to 36% phenolics were obtained at temperatures of up to 120 °C, with an antioxidant activity only two times lower than that of pure gallic acid, but in low amounts. Assays at higher temperatures generated extracts richer in carbohydrates and with a phenolics content of ca. 20 wt.% in comparatively far higher amounts. Neither the amount of suberin nor its structure were affected by the subcritical water treatment.